Move ChibiOS test board and ld

Move the ChibiOS test subproject board and ld files to the kebyoard
folder, so that the build system can find them

2 files changed, 193 insertions, 0 deletions

diff --git a/keyboards/chibios_test/ld/MKL26Z64.ld b/keyboards/chibios_test/ld/MKL26Z64.ld
new file mode 100644
index 0000000000..fb141f888c
--- /dev/null
+++ b/keyboards/chibios_test/ld/MKL26Z64.ld
@@ -0,0 +1,105 @@
+/*

+ * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com

+ *           (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>

+ *

+ * Permission is hereby granted, free of charge, to any person obtaining

+ * a copy of this software and associated documentation files (the "Software"),

+ * to deal in the Software without restriction, including without limitation

+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,

+ * and/or sell copies of the Software, and to permit persons to whom the

+ * Software is furnished to do so, subject to the following conditions:

+ *

+ * The above copyright notice and this permission notice shall be included in

+ * all copies or substantial portions of the Software.

+ *

+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS

+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE

+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

+ * SOFTWARE.

+ */

+

+/*

+ * KL26Z64 memory setup.

+ */

+MEMORY

+{

+  flash0   : org = 0x00000000, len = 0x100

+  flash1   : org = 0x00000400, len = 0x10

+  flash2   : org = 0x00000410, len = 62k - 0x410

+  flash3   : org = 0x0000F800, len = 2k

+  flash4   : org = 0x00000000, len = 0

+  flash5   : org = 0x00000000, len = 0

+  flash6   : org = 0x00000000, len = 0

+  flash7   : org = 0x00000000, len = 0

+  ram0     : org = 0x1FFFF800, len = 8k

+  ram1     : org = 0x00000000, len = 0

+  ram2     : org = 0x00000000, len = 0

+  ram3     : org = 0x00000000, len = 0

+  ram4     : org = 0x00000000, len = 0

+  ram5     : org = 0x00000000, len = 0

+  ram6     : org = 0x00000000, len = 0

+  ram7     : org = 0x00000000, len = 0

+}

+

+/* Flash region for the configuration bytes.*/

+SECTIONS

+{

+  .cfmprotect : ALIGN(4) SUBALIGN(4)

+  {

+    KEEP(*(.cfmconfig))

+  } > flash1

+}

+

+/* For each data/text section two region are defined, a virtual region

+   and a load region (_LMA suffix).*/

+

+/* Flash region to be used for exception vectors.*/

+REGION_ALIAS("VECTORS_FLASH", flash0);

+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);

+

+/* Flash region to be used for constructors and destructors.*/

+REGION_ALIAS("XTORS_FLASH", flash2);

+REGION_ALIAS("XTORS_FLASH_LMA", flash2);

+

+/* Flash region to be used for code text.*/

+REGION_ALIAS("TEXT_FLASH", flash2);

+REGION_ALIAS("TEXT_FLASH_LMA", flash2);

+

+/* Flash region to be used for read only data.*/

+REGION_ALIAS("RODATA_FLASH", flash2);

+REGION_ALIAS("RODATA_FLASH_LMA", flash2);

+

+/* Flash region to be used for various.*/

+REGION_ALIAS("VARIOUS_FLASH", flash2);

+REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);

+

+/* Flash region to be used for RAM(n) initialization data.*/

+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);

+

+/* RAM region to be used for Main stack. This stack accommodates the processing

+   of all exceptions and interrupts.*/

+REGION_ALIAS("MAIN_STACK_RAM", ram0);

+

+/* RAM region to be used for the process stack. This is the stack used by

+   the main() function.*/

+REGION_ALIAS("PROCESS_STACK_RAM", ram0);

+

+/* RAM region to be used for data segment.*/

+REGION_ALIAS("DATA_RAM", ram0);

+REGION_ALIAS("DATA_RAM_LMA", flash2);

+

+/* RAM region to be used for BSS segment.*/

+REGION_ALIAS("BSS_RAM", ram0);

+

+/* RAM region to be used for the default heap.*/

+REGION_ALIAS("HEAP_RAM", ram0);

+

+__eeprom_workarea_start__ = ORIGIN(flash3);

+__eeprom_workarea_size__  = LENGTH(flash3);

+__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;

+

+/* Generic rules inclusion.*/

+INCLUDE rules.ld

diff --git a/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld b/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld
new file mode 100644
index 0000000000..00613328ed
--- /dev/null
+++ b/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld
@@ -0,0 +1,88 @@
+/*

+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+/*

+ * ST32F103xB memory setup for use with the maplemini bootloader.

+ * You will have to

+ * 	#define CORTEX_VTOR_INIT 0x5000

+ * in your projects chconf.h

+ */

+MEMORY

+{

+    flash0  : org = 0x08002000, len = 128k - 0x2000

+    flash1  : org = 0x00000000, len = 0

+    flash2  : org = 0x00000000, len = 0

+    flash3  : org = 0x00000000, len = 0

+    flash4  : org = 0x00000000, len = 0

+    flash5  : org = 0x00000000, len = 0

+    flash6  : org = 0x00000000, len = 0

+    flash7  : org = 0x00000000, len = 0

+    ram0    : org = 0x20000000, len = 20k

+    ram1    : org = 0x00000000, len = 0

+    ram2    : org = 0x00000000, len = 0

+    ram3    : org = 0x00000000, len = 0

+    ram4    : org = 0x00000000, len = 0

+    ram5    : org = 0x00000000, len = 0

+    ram6    : org = 0x00000000, len = 0

+    ram7    : org = 0x00000000, len = 0

+}

+

+/* For each data/text section two region are defined, a virtual region

+   and a load region (_LMA suffix).*/

+

+/* Flash region to be used for exception vectors.*/

+REGION_ALIAS("VECTORS_FLASH", flash0);

+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);

+

+/* Flash region to be used for constructors and destructors.*/

+REGION_ALIAS("XTORS_FLASH", flash0);

+REGION_ALIAS("XTORS_FLASH_LMA", flash0);

+

+/* Flash region to be used for code text.*/

+REGION_ALIAS("TEXT_FLASH", flash0);

+REGION_ALIAS("TEXT_FLASH_LMA", flash0);

+

+/* Flash region to be used for read only data.*/

+REGION_ALIAS("RODATA_FLASH", flash0);

+REGION_ALIAS("RODATA_FLASH_LMA", flash0);

+

+/* Flash region to be used for various.*/

+REGION_ALIAS("VARIOUS_FLASH", flash0);

+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);

+

+/* Flash region to be used for RAM(n) initialization data.*/

+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);

+

+/* RAM region to be used for Main stack. This stack accommodates the processing

+   of all exceptions and interrupts.*/

+REGION_ALIAS("MAIN_STACK_RAM", ram0);

+

+/* RAM region to be used for the process stack. This is the stack used by

+   the main() function.*/

+REGION_ALIAS("PROCESS_STACK_RAM", ram0);

+

+/* RAM region to be used for data segment.*/

+REGION_ALIAS("DATA_RAM", ram0);

+REGION_ALIAS("DATA_RAM_LMA", flash0);

+

+/* RAM region to be used for BSS segment.*/

+REGION_ALIAS("BSS_RAM", ram0);

+

+/* RAM region to be used for the default heap.*/

+REGION_ALIAS("HEAP_RAM", ram0);

+

+/* Generic rules inclusion.*/

+INCLUDE rules.ld