Establish support for AMJPAD

6 files changed, 340 insertions, 0 deletions

diff --git a/keyboards/amjpad/Makefile b/keyboards/amjpad/Makefile
new file mode 100644
index 0000000000..4e2a6f00fd
--- /dev/null
+++ b/keyboards/amjpad/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/amjpad/amjpad.c b/keyboards/amjpad/amjpad.c
new file mode 100644
index 0000000000..ac5991bd08
--- /dev/null
+++ b/keyboards/amjpad/amjpad.c
@@ -0,0 +1,30 @@
+#include "amjpad.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRD |= (1<<6);
+}
+
+void led_set_kb(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+        // Turn numlock on
+        PORTD &= ~(1<<6);
+    } else {
+        // Turn numlock off
+        PORTD |= (1<<6);
+    }
+}
diff --git a/keyboards/amjpad/amjpad.h b/keyboards/amjpad/amjpad.h
new file mode 100644
index 0000000000..b9b4d3686a
--- /dev/null
+++ b/keyboards/amjpad/amjpad.h
@@ -0,0 +1,46 @@
+#ifndef AMJPAD_H
+#define ADMJPAD_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+/* AMJPAD matrix layout
+   * ,-------------------.
+   * | 00 | 01 | 02 | 03 |
+   * |----|----|----|----|
+   * | 10 | 11 | 12 | 13 |
+   * |----|----|----|----|
+   * | 20 | 21 | 22 |    |
+   * |----|----|----| 23 |
+   * | 30 | 31 | 32 |    |
+   * |----|----|----|----|
+   * | 40 | 41 | 42 |    |
+   * |----|----|----| 43 |
+   * |   50    | 52 |    |
+   * `-------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    k00, k01, k02, k03, \
+	k10, k11, k12, k13, \
+	k20, k21, k22, k23, \
+	k30, k31, k32, \
+	k40, k41, k42, k43, \
+	k50, k52 \
+) \
+{ \
+	{k00, k01, k02, k03}, \
+	{k10, k11, k12, k13}, \
+	{k20, k21, k22, k23}, \
+	{k30, k31, k32, XXX}, \
+	{k40, k41, k42, k43}, \
+	{k50, XXX, k52, XXX} \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif
diff --git a/keyboards/amjpad/config.h b/keyboards/amjpad/config.h
new file mode 100644
index 0000000000..1a26d2ab6c
--- /dev/null
+++ b/keyboards/amjpad/config.h
@@ -0,0 +1,94 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    AMJ
+#define PRODUCT         PAD
+#define DESCRIPTION     QMK keyboard firmware for AMJ PAD
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 4
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5, D0 }
+#define MATRIX_COL_PINS { F1, F0, E6, C7 }
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+/* Underlight configuration
+ */
+
+#define RGB_DI_PIN E2
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 8     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/amjpad/keymaps/default/keymap.c b/keyboards/amjpad/keymaps/default/keymap.c
new file mode 100644
index 0000000000..362afd1079
--- /dev/null
+++ b/keyboards/amjpad/keymaps/default/keymap.c
@@ -0,0 +1,101 @@
+#include "amjpad.h"
+
+#ifdef RGBLIGHT_ENABLE
+#include "rgblight.h"
+#endif
+
+// Used for SHIFT_ESC
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,-------------------.
+   * |Esc |TAB |BS  | =  |
+   * |----|----|----|----|
+   * | NL | /  | *  | -  |
+   * |----|----|----|----|
+   * | 7  | 8  | 9  |    |
+   * |----|----|----| +  |
+   * | 4  | 5  | 6  |    |
+   * |----|----|----|----|
+   * | 1  | 2  | 3  |    |
+   * |----|----|----| En |
+   * |   0     |./FN|    |
+   * `-------------------'
+   */
+
+[_BL] = KEYMAP(
+  KC_ESC,KC_TAB,KC_BSPC,KC_PEQL, \
+  KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
+  KC_P7, KC_P8, KC_P9, KC_PPLS,  \
+  KC_P4, KC_P5, KC_P6, \
+  KC_P1, KC_P2, KC_P3, KC_PENT, \
+  KC_P0, LT(_FL,KC_PDOT)),
+
+  /* Keymap _FL: Function Layer
+   * ,-------------------.
+   * |Esc |TAB |BS  | =  |
+   * |----|----|----|----|
+   * | NL | /  | *  | -  |
+   * |----|----|----|----|
+   * | 7  | 8  | 9  |    |
+   * |----|----|----|RST |
+   * | 4  | 5  | 6  |    |
+   * |----|----|----|----|
+   * | 1  | 2  | 3  |    |
+   * |----|----|----| En |
+   * |   0     |./FN|    |
+   * `-------------------'
+   */
+[_FL] = KEYMAP(
+  
+  KC_ESC,KC_TAB,KC_BSPC,KC_PEQL, \
+  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
+  KC_P7, KC_P8, KC_P9, RESET,  \
+  KC_P4, KC_P5, KC_P6, \
+  KC_P1, KC_P2, KC_P3, KC_PENT, \
+  KC_P0, LT(_FL,KC_PDOT)),
+};
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}
diff --git a/keyboards/amjpad/rules.mk b/keyboards/amjpad/rules.mk
new file mode 100644
index 0000000000..d8ec423655
--- /dev/null
+++ b/keyboards/amjpad/rules.mk
@@ -0,0 +1,66 @@
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE ?= no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE ?= no 		# MIDI controls
+AUDIO_ENABLE ?= no
+UNICODE_ENABLE ?= no 		# Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID