diff options
| author | tmk <nobody@nowhere> | 2012-06-26 15:55:45 +0900 |
|---|---|---|
| committer | tmk <nobody@nowhere> | 2012-06-26 15:55:45 +0900 |
| commit | dd93d2915f79d0b825fc6bbc4edb556a69eac406 (patch) | |
| tree | 2a2980c5069385562ba017261cc43d861d882f7b /keyboard/lufa/Makefile | |
| parent | 76033dcd892a115240c5a990e5643cd53acbca87 (diff) | |
initial attempt for LUFA.
Add keyboard/lufa macway keyobard with LUFA.
Add new program target to rule.mk; flip, dfu and teensy
Diffstat (limited to 'keyboard/lufa/Makefile')
| -rw-r--r-- | keyboard/lufa/Makefile | 161 |
1 files changed, 161 insertions, 0 deletions
diff --git a/keyboard/lufa/Makefile b/keyboard/lufa/Makefile new file mode 100644 index 0000000000..1d2f712d4a --- /dev/null +++ b/keyboard/lufa/Makefile @@ -0,0 +1,161 @@ +# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
+# >> Modified for use with the LUFA project. <<
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+# Dean Camera
+# Opendous Inc.
+# Denver Gingerich
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+# Please customize the avrdude settings below first!
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make doxygen = Generate DoxyGen documentation for the project (must have
+# DoxyGen installed)
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
+# "Board" inside the application directory.
+BOARD = USBKEY
+
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Target file name (without extension).
+TARGET = lufa
+
+
+# Path to the LUFA library
+LUFA_PATH = ../../protocol
+
+# Create the LUFA source path variables by including the LUFA root makefile
+include $(LUFA_PATH)/LUFA/makefile
+
+
+
+# List C source files here. (C dependencies are automatically generated.)
+LSRC = $(TARGET).c \
+ Descriptors.c \
+ $(LUFA_SRC_USB) \
+ $(LUFA_SRC_USBCLASS)
+
+SRC = $(subst $(LUFA_PATH)/LUFA/,,$(LSRC))
+SRC += keymap.c \
+ matrix.c \
+ led.c \
+ sendchar_null.c
+CONFIG_H = config.h
+
+
+
+# LUFA library compile-time options and predefined tokens
+LUFA_OPTS = -D USB_DEVICE_ONLY
+LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
+LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
+LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+
+OPT_DEFS = -DF_CPU=$(F_CPU)UL
+OPT_DEFS += -DF_USB=$(F_USB)UL
+OPT_DEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
+OPT_DEFS += $(LUFA_OPTS)
+
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(LUFA_PATH)/LUFA
+
+
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
+
+test:
+ echo $(SRC)
|