[Erez & Jack] Removes keyboards which are not active on qmk

10 files changed, 0 insertions, 839 deletions

diff --git a/keyboard/lightsaber/Makefile.lufa b/keyboard/lightsaber/Makefile.lufa
deleted file mode 100644
index 99090c4367..0000000000
--- a/keyboard/lightsaber/Makefile.lufa
+++ /dev/null
@@ -1,126 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = lightsaber_lufa
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC =	keymap.c \
-	matrix.c \
-	led.c \
-	backlight.c
-
-CONFIG_H = config.h
-
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 8000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-#MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = yes	# Console for debug(+400)
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
-BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
-
-
-# Boot Section Size in bytes
-#   Teensy halfKay   512
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-include $(TMK_DIR)/protocol/lufa.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
-
-winkey: OPT_DEFS += -DLAYOUT_WINKEY
-winkey: all
diff --git a/keyboard/lightsaber/Makefile.pjrc b/keyboard/lightsaber/Makefile.pjrc
deleted file mode 100644
index 0f6d399470..0000000000
--- a/keyboard/lightsaber/Makefile.pjrc
+++ /dev/null
@@ -1,94 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = lightsaber_pjrc
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC =	keymap.c \
-	matrix.c \
-	led.c \
-	backlight.c
-
-CONFIG_H = config.h
-
-
-# MCU name
-MCU = atmega32u4
-
-
-# Processor frequency.
-#   Normally the first thing your program should do is set the clock prescaler,
-#   so your program will run at the correct speed.  You should also set this
-#   variable to same clock speed.  The _delay_ms() macro uses this, and many
-#   examples use this variable to calculate timings.  Do not add a "UL" here.
-F_CPU = 8000000
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-#MOUSEKEY_ENABLE = yes	# Mouse keys(+5000)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+600)
-CONSOLE_ENABLE = yes    # Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes	# USB Nkey Rollover(+500)
-#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
-BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-include $(TMK_DIR)/protocol/pjrc.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
-
-winkey: OPT_DEFS += -DLAYOUT_WINKEY
-winkey: all
diff --git a/keyboard/lightsaber/README.md b/keyboard/lightsaber/README.md
deleted file mode 100644
index 9dcd693095..0000000000
--- a/keyboard/lightsaber/README.md
+++ /dev/null
@@ -1,26 +0,0 @@
-Lightsaber keyboard firmware
-======================
-Korean custom keyboard designed by Duck.
-
-*Note that this is not the official firmware*
-
-Supported models
-----------------
-All pcb options are supported.
-
-
-Build
------
-Move to this directory then just run `make` like:
-
-    $ make -f Makefile.[pjrc|lufa]
-
-Use `Makefile.pjrc` if you want to use PJRC stack or use `Makefile.lufa` for LUFA stack.
-
-
-Bootloader
----------
-The PCB is hardwired to run the bootloader if the key at the `one above backspace` position is held down when connecting the keyboard.
-
-It is still possible to use Boot Magic and Command to access the bootloader though.
-
diff --git a/keyboard/lightsaber/backlight.c b/keyboard/lightsaber/backlight.c
deleted file mode 100644
index 59b8b4a633..0000000000
--- a/keyboard/lightsaber/backlight.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
-Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include "backlight.h"
-
-/* Backlight pin configuration
- *
- * Alphas    PB1 (high)
- * Numeric   PB2 (high)
- * Mod+Num   PB3 (high)
- * Backside  PD6 (high)
- * TopRight  PD7 (low)
- * F-Row     PE6 (high)
- */
-
-void backlight_set(uint8_t level)
-{
-    // Set as output.
-    DDRB |= (1<<1) | (1<<2) | (1<<3);
-    DDRD |= (1<<6) | (1<<7);
-    DDRE |= (1<<6);
-
-    if (level & BACKLIGHT_ALPHA)
-    {
-        PORTB |= (1<<1);
-    }
-    else
-    {
-        PORTB &= ~(1<<1);
-    }
-    if (level & BACKLIGHT_NUMERIC)
-    {
-        PORTB |= (1<<2);
-    }
-    else
-    {
-        PORTB &= ~(1<<2);
-    }
-    if (level & BACKLIGHT_MODNUM)
-    {
-        PORTB |= (1<<3);
-    }
-    else
-    {
-        PORTB &= ~(1<<3);
-    }
-    if (level & BACKLIGHT_BACKSIDE)
-    {
-        PORTD |= (1<<6);
-    }
-    else
-    {
-        PORTD &= ~(1<<6);
-    }
-    if (level & BACKLIGHT_TOPRIGHT)
-    {
-        PORTD &= ~(1<<7);
-    }
-    else
-    {
-        PORTD |= (1<<7);
-    }
-    if (level & BACKLIGHT_FROW)
-    {
-        PORTE |= (1<<6);
-    }
-    else
-    {
-        PORTE &= ~(1<<6);
-    }
-}
diff --git a/keyboard/lightsaber/backlight.h b/keyboard/lightsaber/backlight.h
deleted file mode 100644
index 6dc7967a62..0000000000
--- a/keyboard/lightsaber/backlight.h
+++ /dev/null
@@ -1,9 +0,0 @@
-
-enum backlight_level {
-    BACKLIGHT_ALPHA    = 0b0000001,
-    BACKLIGHT_NUMERIC  = 0b0000010,
-    BACKLIGHT_MODNUM   = 0b0000100,
-    BACKLIGHT_BACKSIDE = 0b0001000,
-    BACKLIGHT_TOPRIGHT = 0b0010000,
-    BACKLIGHT_FROW     = 0b0100000,
-};
diff --git a/keyboard/lightsaber/config.h b/keyboard/lightsaber/config.h
deleted file mode 100644
index d971d038e3..0000000000
--- a/keyboard/lightsaber/config.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
-Copyright 2013 Mathias Andersson <wraul@dbox.se>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6050
-#define DEVICE_VER      0x0104
-#define MANUFACTURER    Duck
-#define PRODUCT         Lightsaber
-
-/* message strings */
-#define DESCRIPTION     t.m.k. keyboard firmware for Lightsaber
-
-/* matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 18
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 1
-
-/* Set 0 if need no debouncing */
-#define DEBOUNCE    5
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-#endif
diff --git a/keyboard/lightsaber/keymap.c b/keyboard/lightsaber/keymap.c
deleted file mode 100644
index 477da9d865..0000000000
--- a/keyboard/lightsaber/keymap.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
-Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * Keymap for Lightsaber controller
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "action.h"
-#include "action_macro.h"
-#include "report.h"
-#include "host.h"
-#include "debug.h"
-#include "keymap.h"
-
-// Convert physical keyboard layout to matrix array.
-// This is a macro to define keymap easily in keyboard layout form.
-#define KEYMAP( \
-    K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N,      K5O, K5P, K5Q, K5R, \
-    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N,      K4O, K4P, K4Q, K4R, \
-    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N,      K3O, K3P, K3Q, K3R, \
-    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N,      K2O, K2P, K2Q, K2R, \
-    K1A,      K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N,      K1O, K1P, K1Q, K1R, \
-    K0A, K0B, K0C,                K0G,                K0K, K0L, K0M, K0N,      K0O, K0P, K0Q, K0R  \
-) { \
-/*             0         1         2         3         4         5         6         7         8         9         10        11        12        13        14        15        16        17 */   \
-/* 5 */   { KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F, KC_##K5G, KC_##K5H, KC_##K5I, KC_##K5J, KC_##K5K, KC_##K5L, KC_##K5M, KC_##K5N, KC_##K5O, KC_##K5P, KC_##K5Q, KC_##K5R}, \
-/* 4 */   { KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F, KC_##K4G, KC_##K4H, KC_##K4I, KC_##K4J, KC_##K4K, KC_##K4L, KC_##K4M, KC_##K4N, KC_##K4O, KC_##K4P, KC_##K4Q, KC_##K4R}, \
-/* 3 */   { KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F, KC_##K3G, KC_##K3H, KC_##K3I, KC_##K3J, KC_##K3K, KC_##K3L, KC_##K3M, KC_##K3N, KC_##K3O, KC_##K3P, KC_##K3Q, KC_##K3R}, \
-/* 2 */   { KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F, KC_##K2G, KC_##K2H, KC_##K2I, KC_##K2J, KC_##K2K, KC_##K2L, KC_##K2M, KC_##K2N, KC_##K2O, KC_##K2P, KC_##K2Q, KC_##K2R}, \
-/* 1 */   { KC_##K1A, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F, KC_##K1G, KC_##K1H, KC_##K1I, KC_##K1J, KC_##K1K, KC_##K1L, KC_NO,    KC_##K1M, KC_##K1N, KC_##K1O, KC_##K1P, KC_##K1Q, KC_##K1R}, \
-/* 0 */   { KC_##K0A, KC_##K0B, KC_##K0C, KC_NO,    KC_NO,    KC_##K0G, KC_NO,    KC_NO,    KC_##K0K, KC_NO,    KC_##K0L, KC_NO,    KC_##K0M, KC_##K0N, KC_##K0O, KC_##K0P, KC_##K0Q, KC_##K0R}  \
-}
-
-#include "keymap_winkey.h"
-
-#define KEYMAPS_SIZE    (sizeof(keymaps) / sizeof(keymaps[0]))
-#define FN_ACTIONS_SIZE (sizeof(fn_actions) / sizeof(fn_actions[0]))
-
-/* translates key to keycode */
-uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
-{
-    if (layer < KEYMAPS_SIZE) {
-        return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
-    } else {
-        // fall back to layer 0
-        return pgm_read_byte(&keymaps[0][(key.row)][(key.col)]);
-    }
-}
-
-/* translates Fn keycode to action */
-action_t keymap_fn_to_action(uint8_t keycode)
-{
-    action_t action;
-    if (FN_INDEX(keycode) < FN_ACTIONS_SIZE) {
-        action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]);
-    } else {
-        action.code = ACTION_NO;
-    }
-    return action;
-}
diff --git a/keyboard/lightsaber/keymap_winkey.h b/keyboard/lightsaber/keymap_winkey.h
deleted file mode 100644
index 3e8367083c..0000000000
--- a/keyboard/lightsaber/keymap_winkey.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#include "backlight.h"
-
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    KEYMAP(\
-        ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,      INS,    PSCR,    SLCK,       BRK,      \
-        GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     NUMLOCK,KP_SLASH,KP_ASTERISK,KP_MINUS, \
-        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,     KP_7,   KP_8,    KP_9,       KP_PLUS,  \
-        CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,FN0, ENT,      KP_4,   KP_5,    KP_6,       NO,       \
-        LSFT,     Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,NO,  RSFT,     KP_1,   KP_2,    KP_3,       KP_ENTER, \
-        LCTL,LGUI,LALT,               SPC,                NO,  RALT,RGUI,RCTL,     KP_0,   NO,      KP_DOT,     NO),      \
-    KEYMAP(\
-        CALC,MYCM,WSCH,WHOM,MAIL,MUTE,VOLD,VOLU,MSEL,MSTP,MPLY,MPRV,MNXT,TRNS,     TRNS,   WAKE,    PWR,        SLEP,     \
-        FN1, FN2, FN3, FN4, FN5, FN6, FN7, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,   TRNS,    TRNS,       TRNS,     \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,   TRNS,    TRNS,       TRNS,     \
-        TRNS,TRNS,TRNS,TRNS,PGDN,TRNS,LEFT,DOWN,UP  ,RGHT,TRNS,TRNS,TRNS,TRNS,     TRNS,   TRNS,    TRNS,       TRNS,     \
-        TRNS,     TRNS,TRNS,TRNS,TRNS,PGUP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,     TRNS,   TRNS,    TRNS,       TRNS,     \
-        TRNS,TRNS,TRNS,               TRNS,               TRNS,TRNS,TRNS,TRNS,     TRNS,   TRNS,    TRNS,       TRNS)
-};
-
-static const uint16_t PROGMEM fn_actions[] = {
-    [0] = ACTION_LAYER_MOMENTARY(1),
-    [1] = ACTION_BACKLIGHT_TOGGLE(),
-    [2] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_ALPHA),
-    [3] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_MODNUM),
-    [4] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_NUMERIC),
-    [5] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_FROW),
-    [6] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_BACKSIDE),
-    [7] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_TOPRIGHT)
-};
diff --git a/keyboard/lightsaber/led.c b/keyboard/lightsaber/led.c
deleted file mode 100644
index c3f85427f5..0000000000
--- a/keyboard/lightsaber/led.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
-Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include "stdint.h"
-#include "led.h"
-
-/* LED pin configuration
- *
- * Caps      PB0 (low)
- * NumLock   PB4 (low)
- *
- */
-void led_set(uint8_t usb_led)
-{
-    // Set as output.
-    DDRB |= (1<<0) | (1<<4);
-
-    if (usb_led & (1<<USB_LED_CAPS_LOCK))
-    {
-        // Output low.
-        PORTB &= ~(1<<0);
-    }
-    else
-    {
-        // Output high.
-        PORTB |= (1<<0);
-    }
-
-    if (usb_led & (1<<USB_LED_NUM_LOCK))
-    {
-        // Output low.
-        PORTB &= ~(1<<4);
-    }
-    else
-    {
-        // Output high.
-        PORTB |= (1<<4);
-    }
-}
diff --git a/keyboard/lightsaber/matrix.c b/keyboard/lightsaber/matrix.c
deleted file mode 100644
index e3eca84df8..0000000000
--- a/keyboard/lightsaber/matrix.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
-Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-
-
-#ifndef DEBOUNCE
-#   define DEBOUNCE 0
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static uint8_t read_rows(void);
-static uint8_t read_fwkey(void);
-static void init_rows(void);
-static void unselect_cols(void);
-static void select_col(uint8_t col);
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-    unselect_cols();
-    init_rows();
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++)  {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-}
-
-uint8_t matrix_scan(void)
-{
-    for (uint8_t col = 0; col < MATRIX_COLS; col++) {  // 0-17
-        select_col(col);
-        _delay_us(3); // TODO: Determine the correct value needed here.
-        uint8_t rows = read_rows();
-        // Use the otherwise unused col: 12 row: 3 for firmware.
-        if(col == 12) {
-            rows |= read_fwkey();
-        }
-        for (uint8_t row = 0; row < MATRIX_ROWS; row++) {  // 0-5
-            bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
-            bool curr_bit = rows & (1<<row);
-            if (prev_bit != curr_bit) {
-                matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
-                if (debouncing) {
-                    dprint("bounce!: "); dprintf("%02X", debouncing); dprintln();
-                }
-                debouncing = DEBOUNCE;
-            }
-        }
-        unselect_cols();
-    }
-
-    if (debouncing) {
-        if (--debouncing) {
-            _delay_ms(1);
-        } else {
-            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-                matrix[i] = matrix_debouncing[i];
-            }
-        }
-    }
-
-    return 1;
-}
-
-bool matrix_is_modified(void)
-{
-    if (debouncing) return false;
-    return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop32(matrix[i]);
-    }
-    return count;
-}
-
-/* Row pin configuration
- * row: 0    1    2    3    4    5
- * pin: PD0  PD1  PD2  PD3  PD5  PB7
- *
- * Firmware uses its own pin PE2
- */
-static void init_rows(void)
-{
-    // Input (DDR:0, PORT:0)
-    DDRD  &= ~0b00101111;
-    PORTD &= ~0b00101111;
-    DDRB  &= ~(1<<7);
-    PORTB &= ~(1<<7);
-
-    // Input with pull-up (DDR:0, PORT:1)
-    DDRE &= ~(1<<2);
-    PORTE |= (1<<2);
-}
-
-static uint8_t read_rows(void)
-{
-    return (PIND&(1<<0) ? (1<<0) : 0) |
-           (PIND&(1<<1) ? (1<<1) : 0) |
-           (PIND&(1<<2) ? (1<<2) : 0) |
-           (PIND&(1<<3) ? (1<<3) : 0) |
-           (PIND&(1<<5) ? (1<<4) : 0) |
-           (PINB&(1<<7) ? (1<<5) : 0);
-}
-
-static uint8_t read_fwkey(void)
-{
-    return PINE&(1<<2) ? 0 : (1<<3);
-}
-
-/* Columns 0 - 15
- * These columns uses two 74HC237D 3 to 8 bit demultiplexers.
- * col / pin:    PC6  PB6  PF0  PF1  PC7
- * 0:             1    0    0    0    0
- * 1:             1    0    1    0    0
- * 2:             1    0    0    1    0
- * 3:             1    0    1    1    0
- * 4:             1    0    0    0    1
- * 5:             1    0    1    0    1
- * 6:             1    0    0    1    1
- * 7:             1    0    1    1    1
- * 8:             0    1    0    0    0
- * 9:             0    1    1    0    0
- * 10:            0    1    0    1    0
- * 11:            0    1    1    1    0
- * 12:            0    1    0    0    1
- * 13:            0    1    1    0    1
- * 14:            0    1    0    1    1
- * 15:            0    1    1    1    1
- *
- * col: 16
- * pin: PB5
- *
- * col: 17
- * pin: PD4
- */
-static void unselect_cols(void)
-{
-    DDRB |= (1<<5) | (1<<6);
-    PORTB &= ~((1<<5) | (1<<6));
-
-    DDRC |= (1<<6) | (1<<7);
-    PORTC &= ~((1<<6) | (1<<7));
-
-    DDRD |= (1<<4);
-    PORTD &= ~(1<<4);
-
-    DDRF |= (1<<0) | (1<<1);
-    PORTF &= ~((1<<0) | (1<<1));
-}
-
-static void select_col(uint8_t col)
-{
-    // Output high (DDR:1, PORT:1) to select
-    switch (col) {
-        case 0:
-            PORTC |= (1<<6);
-            break;
-        case 1:
-            PORTC |= (1<<6);
-            PORTF |= (1<<0);
-            break;
-        case 2:
-            PORTC |= (1<<6);
-            PORTF |= (1<<1);
-            break;
-        case 3:
-            PORTC |= (1<<6);
-            PORTF |= (1<<0) | (1<<1);
-            break;
-        case 4:
-            PORTC |= (1<<6);
-            PORTC |= (1<<7);
-            break;
-        case 5:
-            PORTC |= (1<<6);
-            PORTF |= (1<<0);
-            PORTC |= (1<<7);
-            break;
-        case 6:
-            PORTC |= (1<<6);
-            PORTF |= (1<<1);
-            PORTC |= (1<<7);
-            break;
-        case 7:
-            PORTC |= (1<<6);
-            PORTF |= (1<<0) | (1<<1);
-            PORTC |= (1<<7);
-            break;
-        case 8:
-            PORTB |= (1<<6);
-            break;
-        case 9:
-            PORTB |= (1<<6);
-            PORTF |= (1<<0);
-            break;
-        case 10:
-            PORTB |= (1<<6);
-            PORTF |= (1<<1);
-            break;
-        case 11:
-            PORTB |= (1<<6);
-            PORTF |= (1<<0) | (1<<1);
-            break;
-        case 12:
-            PORTB |= (1<<6);
-            PORTC |= (1<<7);
-            break;
-        case 13:
-            PORTB |= (1<<6);
-            PORTF |= (1<<0);
-            PORTC |= (1<<7);
-            break;
-        case 14:
-            PORTB |= (1<<6);
-            PORTF |= (1<<1);
-            PORTC |= (1<<7);
-            break;
-        case 15:
-            PORTB |= (1<<6);
-            PORTF |= (1<<0) | (1<<1);
-            PORTC |= (1<<7);
-            break;
-        case 16:
-            PORTB |= (1<<5);
-            break;
-        case 17:
-            PORTD |= (1<<4);
-            break;
-    }
-}