clang-format changes

1 files changed, 141 insertions, 162 deletions

diff --git a/drivers/avr/hd44780.h b/drivers/avr/hd44780.h
index 7421c8131f..e60817e989 100644
--- a/drivers/avr/hd44780.h
+++ b/drivers/avr/hd44780.h
@@ -6,7 +6,7 @@
  License:   GNU General Public License Version 3
  File:	    $Id: lcd.h,v 1.14.2.4 2015/01/20 17:16:07 peter Exp $
  Software:  AVR-GCC 4.x
- Hardware:  any AVR device, memory mapped mode only for AVR with 
+ Hardware:  any AVR device, memory mapped mode only for AVR with
             memory mapped interface (AT90S8515/ATmega8515/ATmega128)
 ***************************************************************************/
 
@@ -15,333 +15,315 @@
  Collection of libraries for AVR-GCC
  @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury
  @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3
- 
+
  @file
  @defgroup pfleury_lcd LCD library <lcd.h>
  @code #include <lcd.h> @endcode
- 
+
  @brief Basic routines for interfacing a HD44780U-based character LCD display
 
- LCD character displays can be found in many devices, like espresso machines, laser printers. 
- The Hitachi HD44780 controller and its compatible controllers like Samsung KS0066U have become an industry standard for these types of displays. 
- 
+ LCD character displays can be found in many devices, like espresso machines, laser printers.
+ The Hitachi HD44780 controller and its compatible controllers like Samsung KS0066U have become an industry standard for these types of displays.
+
  This library allows easy interfacing with a HD44780 compatible display and can be
- operated in memory mapped mode (LCD_IO_MODE defined as 0 in the include file lcd.h.) or in 
+ operated in memory mapped mode (LCD_IO_MODE defined as 0 in the include file lcd.h.) or in
  4-bit IO port mode (LCD_IO_MODE defined as 1). 8-bit IO port mode is not supported.
 
  Memory mapped mode is compatible with old Kanda STK200 starter kit, but also supports
  generation of R/W signal through A8 address line.
 
  @see The chapter <a href=" http://homepage.hispeed.ch/peterfleury/avr-lcd44780.html" target="_blank">Interfacing a HD44780 Based LCD to an AVR</a>
-      on my home page, which shows example circuits how to connect an LCD to an AVR controller. 
+      on my home page, which shows example circuits how to connect an LCD to an AVR controller.
 
  @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury
- 
+
  @version   2.0
- 
+
  @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3
-  
+
 */
 
 #include <inttypes.h>
 #include <avr/pgmspace.h>
 
 #if (__GNUC__ * 100 + __GNUC_MINOR__) < 405
-#error "This library requires AVR-GCC 4.5 or later, update to newer AVR-GCC compiler !"
+#    error "This library requires AVR-GCC 4.5 or later, update to newer AVR-GCC compiler !"
 #endif
 
-
 /**@{*/
 
 /*
- * LCD and target specific definitions below can be defined in a separate include file with name lcd_definitions.h instead modifying this file 
+ * LCD and target specific definitions below can be defined in a separate include file with name lcd_definitions.h instead modifying this file
  * by adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile
  * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
  */
 #ifdef _LCD_DEFINITIONS_FILE
-#include "lcd_definitions.h"
+#    include "lcd_definitions.h"
 #endif
 
-
 /**
  * @name  Definition for LCD controller type
  * Use 0 for HD44780 controller, change to 1 for displays with KS0073 controller.
  */
-#ifndef LCD_CONTROLLER_KS0073 
-#define LCD_CONTROLLER_KS0073 0  /**< Use 0 for HD44780 controller, 1 for KS0073 controller */
+#ifndef LCD_CONTROLLER_KS0073
+#    define LCD_CONTROLLER_KS0073 0 /**< Use 0 for HD44780 controller, 1 for KS0073 controller */
 #endif
 
-/** 
- * @name  Definitions for Display Size 
+/**
+ * @name  Definitions for Display Size
  * Change these definitions to adapt setting to your display
  *
- * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by 
+ * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
  * adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile.
  * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
  *
  */
 #ifndef LCD_LINES
-#define LCD_LINES           2     /**< number of visible lines of the display */
+#    define LCD_LINES 2 /**< number of visible lines of the display */
 #endif
 #ifndef LCD_DISP_LENGTH
-#define LCD_DISP_LENGTH    16     /**< visibles characters per line of the display */
+#    define LCD_DISP_LENGTH 16 /**< visibles characters per line of the display */
 #endif
 #ifndef LCD_LINE_LENGTH
-#define LCD_LINE_LENGTH  0x40     /**< internal line length of the display    */
+#    define LCD_LINE_LENGTH 0x40 /**< internal line length of the display    */
 #endif
 #ifndef LCD_START_LINE1
-#define LCD_START_LINE1  0x00     /**< DDRAM address of first char of line 1 */
+#    define LCD_START_LINE1 0x00 /**< DDRAM address of first char of line 1 */
 #endif
 #ifndef LCD_START_LINE2
-#define LCD_START_LINE2  0x40     /**< DDRAM address of first char of line 2 */
+#    define LCD_START_LINE2 0x40 /**< DDRAM address of first char of line 2 */
 #endif
 #ifndef LCD_START_LINE3
-#define LCD_START_LINE3  0x14     /**< DDRAM address of first char of line 3 */
+#    define LCD_START_LINE3 0x14 /**< DDRAM address of first char of line 3 */
 #endif
 #ifndef LCD_START_LINE4
-#define LCD_START_LINE4  0x54     /**< DDRAM address of first char of line 4 */
+#    define LCD_START_LINE4 0x54 /**< DDRAM address of first char of line 4 */
 #endif
 #ifndef LCD_WRAP_LINES
-#define LCD_WRAP_LINES      0     /**< 0: no wrap, 1: wrap at end of visibile line */
+#    define LCD_WRAP_LINES 0 /**< 0: no wrap, 1: wrap at end of visibile line */
 #endif
 
-
 /**
  * @name Definitions for 4-bit IO mode
  *
- * The four LCD data lines and the three control lines RS, RW, E can be on the 
- * same port or on different ports. 
+ * The four LCD data lines and the three control lines RS, RW, E can be on the
+ * same port or on different ports.
  * Change LCD_RS_PORT, LCD_RW_PORT, LCD_E_PORT if you want the control lines on
- * different ports. 
+ * different ports.
  *
  * Normally the four data lines should be mapped to bit 0..3 on one port, but it
  * is possible to connect these data lines in different order or even on different
  * ports by adapting the LCD_DATAx_PORT and LCD_DATAx_PIN definitions.
  *
- * Adjust these definitions to your target.\n 
- * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by 
+ * Adjust these definitions to your target.\n
+ * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
  * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile.
  * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
- *  
+ *
  */
-#define LCD_IO_MODE      1            /**< 0: memory mapped mode, 1: IO port mode */
+#define LCD_IO_MODE 1 /**< 0: memory mapped mode, 1: IO port mode */
 
 #if LCD_IO_MODE
 
-#ifndef LCD_PORT
-#define LCD_PORT         PORTA        /**< port for the LCD lines   */
-#endif
-#ifndef LCD_DATA0_PORT
-#define LCD_DATA0_PORT   LCD_PORT     /**< port for 4bit data bit 0 */
-#endif
-#ifndef LCD_DATA1_PORT
-#define LCD_DATA1_PORT   LCD_PORT     /**< port for 4bit data bit 1 */
-#endif
-#ifndef LCD_DATA2_PORT
-#define LCD_DATA2_PORT   LCD_PORT     /**< port for 4bit data bit 2 */
-#endif
-#ifndef LCD_DATA3_PORT
-#define LCD_DATA3_PORT   LCD_PORT     /**< port for 4bit data bit 3 */
-#endif
-#ifndef LCD_DATA0_PIN
-#define LCD_DATA0_PIN    4            /**< pin for 4bit data bit 0  */
-#endif
-#ifndef LCD_DATA1_PIN
-#define LCD_DATA1_PIN    5            /**< pin for 4bit data bit 1  */
-#endif
-#ifndef LCD_DATA2_PIN
-#define LCD_DATA2_PIN    6            /**< pin for 4bit data bit 2  */
-#endif
-#ifndef LCD_DATA3_PIN
-#define LCD_DATA3_PIN    7            /**< pin for 4bit data bit 3  */
-#endif
-#ifndef LCD_RS_PORT
-#define LCD_RS_PORT      LCD_PORT     /**< port for RS line         */
-#endif
-#ifndef LCD_RS_PIN
-#define LCD_RS_PIN       3            /**< pin  for RS line         */
-#endif
-#ifndef LCD_RW_PORT
-#define LCD_RW_PORT      LCD_PORT     /**< port for RW line         */
-#endif
-#ifndef LCD_RW_PIN
-#define LCD_RW_PIN       2            /**< pin  for RW line         */
-#endif
-#ifndef LCD_E_PORT
-#define LCD_E_PORT       LCD_PORT     /**< port for Enable line     */
-#endif
-#ifndef LCD_E_PIN
-#define LCD_E_PIN        1            /**< pin  for Enable line     */
-#endif
-
-#elif defined(__AVR_AT90S4414__) || defined(__AVR_AT90S8515__) || defined(__AVR_ATmega64__) || \
-      defined(__AVR_ATmega8515__)|| defined(__AVR_ATmega103__) || defined(__AVR_ATmega128__) || \
-      defined(__AVR_ATmega161__) || defined(__AVR_ATmega162__)
+#    ifndef LCD_PORT
+#        define LCD_PORT PORTA /**< port for the LCD lines   */
+#    endif
+#    ifndef LCD_DATA0_PORT
+#        define LCD_DATA0_PORT LCD_PORT /**< port for 4bit data bit 0 */
+#    endif
+#    ifndef LCD_DATA1_PORT
+#        define LCD_DATA1_PORT LCD_PORT /**< port for 4bit data bit 1 */
+#    endif
+#    ifndef LCD_DATA2_PORT
+#        define LCD_DATA2_PORT LCD_PORT /**< port for 4bit data bit 2 */
+#    endif
+#    ifndef LCD_DATA3_PORT
+#        define LCD_DATA3_PORT LCD_PORT /**< port for 4bit data bit 3 */
+#    endif
+#    ifndef LCD_DATA0_PIN
+#        define LCD_DATA0_PIN 4 /**< pin for 4bit data bit 0  */
+#    endif
+#    ifndef LCD_DATA1_PIN
+#        define LCD_DATA1_PIN 5 /**< pin for 4bit data bit 1  */
+#    endif
+#    ifndef LCD_DATA2_PIN
+#        define LCD_DATA2_PIN 6 /**< pin for 4bit data bit 2  */
+#    endif
+#    ifndef LCD_DATA3_PIN
+#        define LCD_DATA3_PIN 7 /**< pin for 4bit data bit 3  */
+#    endif
+#    ifndef LCD_RS_PORT
+#        define LCD_RS_PORT LCD_PORT /**< port for RS line         */
+#    endif
+#    ifndef LCD_RS_PIN
+#        define LCD_RS_PIN 3 /**< pin  for RS line         */
+#    endif
+#    ifndef LCD_RW_PORT
+#        define LCD_RW_PORT LCD_PORT /**< port for RW line         */
+#    endif
+#    ifndef LCD_RW_PIN
+#        define LCD_RW_PIN 2 /**< pin  for RW line         */
+#    endif
+#    ifndef LCD_E_PORT
+#        define LCD_E_PORT LCD_PORT /**< port for Enable line     */
+#    endif
+#    ifndef LCD_E_PIN
+#        define LCD_E_PIN 1 /**< pin  for Enable line     */
+#    endif
+
+#elif defined(__AVR_AT90S4414__) || defined(__AVR_AT90S8515__) || defined(__AVR_ATmega64__) || defined(__AVR_ATmega8515__) || defined(__AVR_ATmega103__) || defined(__AVR_ATmega128__) || defined(__AVR_ATmega161__) || defined(__AVR_ATmega162__)
 /*
  * memory mapped mode is only supported when the device has an external data memory interface
  */
-#define LCD_IO_DATA      0xC000    /* A15=E=1, A14=RS=1                 */
-#define LCD_IO_FUNCTION  0x8000    /* A15=E=1, A14=RS=0                 */
-#define LCD_IO_READ      0x0100    /* A8 =R/W=1 (R/W: 1=Read, 0=Write   */
+#    define LCD_IO_DATA 0xC000     /* A15=E=1, A14=RS=1                 */
+#    define LCD_IO_FUNCTION 0x8000 /* A15=E=1, A14=RS=0                 */
+#    define LCD_IO_READ 0x0100     /* A8 =R/W=1 (R/W: 1=Read, 0=Write   */
 
 #else
-#error "external data memory interface not available for this device, use 4-bit IO port mode"
+#    error "external data memory interface not available for this device, use 4-bit IO port mode"
 
 #endif
 
-
 /**
  * @name Definitions of delays
  * Used to calculate delay timers.
  * Adapt the F_CPU define in the Makefile to the clock frequency in Hz of your target
  *
- * These delay times can be adjusted, if some displays require different delays.\n 
- * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by 
+ * These delay times can be adjusted, if some displays require different delays.\n
+ * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
  * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile.
  * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
  */
 #ifndef LCD_DELAY_BOOTUP
-#define LCD_DELAY_BOOTUP   16000      /**< delay in micro seconds after power-on  */
+#    define LCD_DELAY_BOOTUP 16000 /**< delay in micro seconds after power-on  */
 #endif
 #ifndef LCD_DELAY_INIT
-#define LCD_DELAY_INIT      5000      /**< delay in micro seconds after initialization command sent  */
+#    define LCD_DELAY_INIT 5000 /**< delay in micro seconds after initialization command sent  */
 #endif
 #ifndef LCD_DELAY_INIT_REP
-#define LCD_DELAY_INIT_REP    64      /**< delay in micro seconds after initialization command repeated */
+#    define LCD_DELAY_INIT_REP 64 /**< delay in micro seconds after initialization command repeated */
 #endif
 #ifndef LCD_DELAY_INIT_4BIT
-#define LCD_DELAY_INIT_4BIT   64      /**< delay in micro seconds after setting 4-bit mode */ 
+#    define LCD_DELAY_INIT_4BIT 64 /**< delay in micro seconds after setting 4-bit mode */
 #endif
 #ifndef LCD_DELAY_BUSY_FLAG
-#define LCD_DELAY_BUSY_FLAG    4      /**< time in micro seconds the address counter is updated after busy flag is cleared */
+#    define LCD_DELAY_BUSY_FLAG 4 /**< time in micro seconds the address counter is updated after busy flag is cleared */
 #endif
 #ifndef LCD_DELAY_ENABLE_PULSE
-#define LCD_DELAY_ENABLE_PULSE 1      /**< enable signal pulse width in micro seconds */
+#    define LCD_DELAY_ENABLE_PULSE 1 /**< enable signal pulse width in micro seconds */
 #endif
 
-
 /**
  * @name Definitions for LCD command instructions
- * The constants define the various LCD controller instructions which can be passed to the 
+ * The constants define the various LCD controller instructions which can be passed to the
  * function lcd_command(), see HD44780 data sheet for a complete description.
  */
 
 /* instruction register bit positions, see HD44780U data sheet */
-#define LCD_CLR               0      /* DB0: clear display                  */
-#define LCD_HOME              1      /* DB1: return to home position        */
-#define LCD_ENTRY_MODE        2      /* DB2: set entry mode                 */
-#define LCD_ENTRY_INC         1      /*   DB1: 1=increment, 0=decrement     */
-#define LCD_ENTRY_SHIFT       0      /*   DB2: 1=display shift on           */
-#define LCD_ON                3      /* DB3: turn lcd/cursor on             */
-#define LCD_ON_DISPLAY        2      /*   DB2: turn display on              */
-#define LCD_ON_CURSOR         1      /*   DB1: turn cursor on               */
-#define LCD_ON_BLINK          0      /*     DB0: blinking cursor ?          */
-#define LCD_MOVE              4      /* DB4: move cursor/display            */
-#define LCD_MOVE_DISP         3      /*   DB3: move display (0-> cursor) ?  */
-#define LCD_MOVE_RIGHT        2      /*   DB2: move right (0-> left) ?      */
-#define LCD_FUNCTION          5      /* DB5: function set                   */
-#define LCD_FUNCTION_8BIT     4      /*   DB4: set 8BIT mode (0->4BIT mode) */
-#define LCD_FUNCTION_2LINES   3      /*   DB3: two lines (0->one line)      */
-#define LCD_FUNCTION_10DOTS   2      /*   DB2: 5x10 font (0->5x7 font)      */
-#define LCD_CGRAM             6      /* DB6: set CG RAM address             */
-#define LCD_DDRAM             7      /* DB7: set DD RAM address             */
-#define LCD_BUSY              7      /* DB7: LCD is busy                    */
+#define LCD_CLR 0             /* DB0: clear display                  */
+#define LCD_HOME 1            /* DB1: return to home position        */
+#define LCD_ENTRY_MODE 2      /* DB2: set entry mode                 */
+#define LCD_ENTRY_INC 1       /*   DB1: 1=increment, 0=decrement     */
+#define LCD_ENTRY_SHIFT 0     /*   DB2: 1=display shift on           */
+#define LCD_ON 3              /* DB3: turn lcd/cursor on             */
+#define LCD_ON_DISPLAY 2      /*   DB2: turn display on              */
+#define LCD_ON_CURSOR 1       /*   DB1: turn cursor on               */
+#define LCD_ON_BLINK 0        /*     DB0: blinking cursor ?          */
+#define LCD_MOVE 4            /* DB4: move cursor/display            */
+#define LCD_MOVE_DISP 3       /*   DB3: move display (0-> cursor) ?  */
+#define LCD_MOVE_RIGHT 2      /*   DB2: move right (0-> left) ?      */
+#define LCD_FUNCTION 5        /* DB5: function set                   */
+#define LCD_FUNCTION_8BIT 4   /*   DB4: set 8BIT mode (0->4BIT mode) */
+#define LCD_FUNCTION_2LINES 3 /*   DB3: two lines (0->one line)      */
+#define LCD_FUNCTION_10DOTS 2 /*   DB2: 5x10 font (0->5x7 font)      */
+#define LCD_CGRAM 6           /* DB6: set CG RAM address             */
+#define LCD_DDRAM 7           /* DB7: set DD RAM address             */
+#define LCD_BUSY 7            /* DB7: LCD is busy                    */
 
 /* set entry mode: display shift on/off, dec/inc cursor move direction */
-#define LCD_ENTRY_DEC            0x04   /* display shift off, dec cursor move dir */
-#define LCD_ENTRY_DEC_SHIFT      0x05   /* display shift on,  dec cursor move dir */
-#define LCD_ENTRY_INC_           0x06   /* display shift off, inc cursor move dir */
-#define LCD_ENTRY_INC_SHIFT      0x07   /* display shift on,  inc cursor move dir */
+#define LCD_ENTRY_DEC 0x04       /* display shift off, dec cursor move dir */
+#define LCD_ENTRY_DEC_SHIFT 0x05 /* display shift on,  dec cursor move dir */
+#define LCD_ENTRY_INC_ 0x06      /* display shift off, inc cursor move dir */
+#define LCD_ENTRY_INC_SHIFT 0x07 /* display shift on,  inc cursor move dir */
 
 /* display on/off, cursor on/off, blinking char at cursor position */
-#define LCD_DISP_OFF             0x08   /* display off                            */
-#define LCD_DISP_ON              0x0C   /* display on, cursor off                 */
-#define LCD_DISP_ON_BLINK        0x0D   /* display on, cursor off, blink char     */
-#define LCD_DISP_ON_CURSOR       0x0E   /* display on, cursor on                  */
-#define LCD_DISP_ON_CURSOR_BLINK 0x0F   /* display on, cursor on, blink char      */
+#define LCD_DISP_OFF 0x08             /* display off                            */
+#define LCD_DISP_ON 0x0C              /* display on, cursor off                 */
+#define LCD_DISP_ON_BLINK 0x0D        /* display on, cursor off, blink char     */
+#define LCD_DISP_ON_CURSOR 0x0E       /* display on, cursor on                  */
+#define LCD_DISP_ON_CURSOR_BLINK 0x0F /* display on, cursor on, blink char      */
 
 /* move cursor/shift display */
-#define LCD_MOVE_CURSOR_LEFT     0x10   /* move cursor left  (decrement)          */
-#define LCD_MOVE_CURSOR_RIGHT    0x14   /* move cursor right (increment)          */
-#define LCD_MOVE_DISP_LEFT       0x18   /* shift display left                     */
-#define LCD_MOVE_DISP_RIGHT      0x1C   /* shift display right                    */
+#define LCD_MOVE_CURSOR_LEFT 0x10  /* move cursor left  (decrement)          */
+#define LCD_MOVE_CURSOR_RIGHT 0x14 /* move cursor right (increment)          */
+#define LCD_MOVE_DISP_LEFT 0x18    /* shift display left                     */
+#define LCD_MOVE_DISP_RIGHT 0x1C   /* shift display right                    */
 
 /* function set: set interface data length and number of display lines */
-#define LCD_FUNCTION_4BIT_1LINE  0x20   /* 4-bit interface, single line, 5x7 dots */
-#define LCD_FUNCTION_4BIT_2LINES 0x28   /* 4-bit interface, dual line,   5x7 dots */
-#define LCD_FUNCTION_8BIT_1LINE  0x30   /* 8-bit interface, single line, 5x7 dots */
-#define LCD_FUNCTION_8BIT_2LINES 0x38   /* 8-bit interface, dual line,   5x7 dots */
+#define LCD_FUNCTION_4BIT_1LINE 0x20  /* 4-bit interface, single line, 5x7 dots */
+#define LCD_FUNCTION_4BIT_2LINES 0x28 /* 4-bit interface, dual line,   5x7 dots */
+#define LCD_FUNCTION_8BIT_1LINE 0x30  /* 8-bit interface, single line, 5x7 dots */
+#define LCD_FUNCTION_8BIT_2LINES 0x38 /* 8-bit interface, dual line,   5x7 dots */
 
+#define LCD_MODE_DEFAULT ((1 << LCD_ENTRY_MODE) | (1 << LCD_ENTRY_INC))
 
-#define LCD_MODE_DEFAULT     ((1<<LCD_ENTRY_MODE) | (1<<LCD_ENTRY_INC) )
-
-
-
-/** 
+/**
  *  @name Functions
  */
 
-
 /**
  @brief    Initialize display and select type of cursor
  @param    dispAttr \b LCD_DISP_OFF display off\n
                     \b LCD_DISP_ON display on, cursor off\n
                     \b LCD_DISP_ON_CURSOR display on, cursor on\n
-                    \b LCD_DISP_ON_CURSOR_BLINK display on, cursor on flashing             
+                    \b LCD_DISP_ON_CURSOR_BLINK display on, cursor on flashing
  @return  none
 */
 extern void lcd_init(uint8_t dispAttr);
 
-
 /**
  @brief    Clear display and set cursor to home position
  @return   none
 */
 extern void lcd_clrscr(void);
 
-
 /**
  @brief    Set cursor to home position
  @return   none
 */
 extern void lcd_home(void);
 
-
 /**
  @brief    Set cursor to specified position
- 
+
  @param    x horizontal position\n (0: left most position)
  @param    y vertical position\n   (0: first line)
  @return   none
 */
 extern void lcd_gotoxy(uint8_t x, uint8_t y);
 
-
 /**
  @brief    Display character at current cursor position
- @param    c character to be displayed                                       
+ @param    c character to be displayed
  @return   none
 */
 extern void lcd_putc(char c);
 
-
 /**
  @brief    Display string without auto linefeed
- @param    s string to be displayed                                        
+ @param    s string to be displayed
  @return   none
 */
 extern void lcd_puts(const char *s);
 
-
 /**
  @brief    Display string from program memory without auto linefeed
- @param    progmem_s string from program memory be be displayed                                        
+ @param    progmem_s string from program memory be be displayed
  @return   none
  @see      lcd_puts_P
 */
 extern void lcd_puts_p(const char *progmem_s);
 
-
 /**
  @brief    Send LCD controller instruction command
  @param    cmd instruction to send to LCD controller, see HD44780 data sheet
@@ -349,23 +331,20 @@ extern void lcd_puts_p(const char *progmem_s);
 */
 extern void lcd_command(uint8_t cmd);
 
-
 /**
- @brief    Send data byte to LCD controller 
- 
+ @brief    Send data byte to LCD controller
+
  Similar to lcd_putc(), but without interpreting LF
  @param    data byte to send to LCD controller, see HD44780 data sheet
  @return   none
 */
 extern void lcd_data(uint8_t data);
 
-
 /**
  @brief macros for automatically storing string constant in program memory
 */
-#define lcd_puts_P(__s)         lcd_puts_p(PSTR(__s))
+#define lcd_puts_P(__s) lcd_puts_p(PSTR(__s))
 
 /**@}*/
 
-#endif //LCD_H
-
+#endif  // LCD_H