Fix keymap for new framework

4 files changed, 100 insertions, 8 deletions

diff --git a/converter/m0110_usb/Makefile.lufa b/converter/m0110_usb/Makefile.lufa
new file mode 100644
index 0000000000..028bdf9331
--- /dev/null
+++ b/converter/m0110_usb/Makefile.lufa
@@ -0,0 +1,91 @@
+# Target file name (without extension).
+TARGET = m0110_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = 	keymap.c \
+	matrix.c \
+	led.c \
+	m0110.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Build Options
+#   *Comment out* to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+# Boot Section Size in bytes
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+OPT_DEFS += -DBOOT_SIZE=4096
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
+
+hasu: EXTRAFLAGS += -DHASU
+hasu: all
diff --git a/converter/m0110_usb/README.md b/converter/m0110_usb/README.md
index 206f434251..80503e8755 100644
--- a/converter/m0110_usb/README.md
+++ b/converter/m0110_usb/README.md
@@ -53,7 +53,8 @@ You can edit *Makefile* and *config.h* to change compile options and pin configu
 
     $ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
     $ cd m0110_usb
-    $ make
+    $ make -f Makefile.lufa clean
+    $ make -f Makefile.lufa
 
 and program your Teensy with [PJRC Teensy loader](http://www.pjrc.com/teensy/loader.html).
 
@@ -74,7 +75,7 @@ You can change keymaps by editing *keymap.c*.
     |---------------------------------------------------------| |---------------|
     |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift   | |  1|  2|  3|   |
     `---------------------------------------------------------' |-----------|Ent|
-         |Alt|Gui |         Space               |Ctl |Alt|      |      0|  .|   |
+         |Ctl|Alt |         Space               |Gui |Ctl|      |      0|  .|   |
          `-----------------------------------------------'      `---------------'
 #### *HHKB/WASD Layer(WASD/IJKL)*
     ,---------------------------------------------------------. ,---------------.
@@ -86,7 +87,7 @@ You can change keymaps by editing *keymap.c*.
     |---------------------------------------------------------| |---------------|
     |Shift   |End|   |PgD|   |   |   |PgD|   |End|   |Shift   | |  1|  2|  3|   |
     `---------------------------------------------------------' |-----------|Ent|
-         |Alt|Gui |         Space               |Ctl |Alt|      |      0|  .|   |
+         |Ctl|Alt |         Space               |Gui |Ctl|      |      0|  .|   |
          `-----------------------------------------------'      `---------------'
 
 ### M0110A
diff --git a/converter/m0110_usb/config.h b/converter/m0110_usb/config.h
index be00259e6b..d43f283838 100644
--- a/converter/m0110_usb/config.h
+++ b/converter/m0110_usb/config.h
@@ -24,6 +24,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x0110
+#define DEVICE_VER      0x0100
 #define MANUFACTURER    t.m.k.
 #define PRODUCT         M0110 keyboard converter
 #define DESCRIPTION     convert M0110 keyboard to USB
diff --git a/converter/m0110_usb/keymap.c b/converter/m0110_usb/keymap.c
index 191bf3a156..7a3bc35856 100644
--- a/converter/m0110_usb/keymap.c
+++ b/converter/m0110_usb/keymap.c
@@ -19,7 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <stdint.h>
 #include <stdbool.h>
 #include <avr/pgmspace.h>
-#include "usb_keyboard.h"
 #include "keycode.h"
 #include "print.h"
 #include "debug.h"
@@ -148,7 +147,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |---------------------------------------------------------| |---------------|
      * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
      * |---------------------------------------------------------| |-----------|Ent|
-     * |Alt  |Gui    |         Space         |Ctl|  \|Lft|Rgt|Dn | |      0|  .|   |
+     * |Ctl  |Alt    |         Space         |Gui|  \|Lft|Rgt|Dn | |      0|  .|   |
      * `---------------------------------------------------------' `---------------'
      */
     KEYMAP(
@@ -156,7 +155,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,         P7,  P8,  P9,  PMNS,
     FN0, A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,     P4,  P5,  P6,  PPLS,
     LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          UP,      P1,  P2,  P3,  PENT,
-    LALT,LGUI,               SPC,                LCTL,BSLS,LEFT,RGHT,DOWN,    P0,       PDOT
+    LCTL,LALT,               SPC,                LGUI,BSLS,LEFT,RGHT,DOWN,    P0,       PDOT
     ),
     /* Cursor Layer(WASD, IJKL)
      * ,---------------------------------------------------------. ,---------------.
@@ -168,7 +167,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |---------------------------------------------------------| |---------------|
      * |Shift   |End|   |PgD|   |   |   |PgD|   |End|   |Shif|PgU| |  1|  2|  3|   |
      * |---------------------------------------------------------| |-----------|Ent|
-     * |Alt  |Gui    |         Space        |Gui |Ins|Hom|End|PgD| |      0|  .|   |
+     * |Ctl  |Alt    |         Space        |Gui |Ins|Hom|End|PgD| |      0|  .|   |
      * `---------------------------------------------------------' `---------------'
      */
     KEYMAP(
@@ -176,7 +175,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     CAPS,HOME,UP,  PGUP,NO,  NO,  NO,  PGUP,UP,  HOME,PSCR,SLCK,PAUS,         P7,  P8,  P9,  PMNS,
     FN0, LEFT,DOWN,RGHT,NO,  NO,  NO,  LEFT,DOWN,RGHT,NO,  NO,       ENT,     P4,  P5,  P6,  PPLS,
     LSFT,END, NO,  PGDN,NO,  NO,  NO,  PGDN,NO,  END, NO,            PGUP,    P1,  P2,  P3,  PENT,
-    LALT,LGUI,               SPC,                LCTL,INS, HOME,END, PGDN,    P0,       PDOT
+    LCTL,LALT,               SPC,                LGUI,INS, HOME,END, PGDN,    P0,       PDOT
     ),
 };