summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDrashna Jaelre <drashna@live.com>2020-07-18 13:24:23 -0700
committerGitHub <noreply@github.com>2020-07-18 21:24:23 +0100
commitc4d778a302462929ba71a4746afa1f21f10922c2 (patch)
treea333fbe6d573603696ee5a4cf7c50f5d65f756e0
parent82dcb173386be1a5dc867401dca63cde6d0e8121 (diff)
[Docs] Update ISP Guide (#9748)
* [Doc] Update ISP Guide Correct the fuses for Caterina, and make the `:production` command more obvious. * fix casing before fauxpark catches it
-rw-r--r--docs/isp_flashing_guide.md12
1 files changed, 7 insertions, 5 deletions
diff --git a/docs/isp_flashing_guide.md b/docs/isp_flashing_guide.md
index 8ee5a40d9e..9a65fe1154 100644
--- a/docs/isp_flashing_guide.md
+++ b/docs/isp_flashing_guide.md
@@ -141,7 +141,9 @@ To do this manually:
?> It's possible to use other bootloaders here in the same way, but __you need a bootloader__, otherwise you'll have to use ISP again to write new firmware to your keyboard.
-To do this the easy way, you can flash the board using the `:production` target when compiling. This compiles the firmware, then compiles the QMK DFU bootloader, and then creates a combined image. Once this is done, you'll see three files:
+#### Create QMK DFU Bootloader and Production images
+
+You can create the firmware, the QMK DFU Bootloader and the production firmware images for the board using the `:production` target when compiling. Once this is done, you'll see three files:
* `<keyboard>_<keymap>.hex`
* `<keyboard>_<keymap>_bootloader.hex`
* `<keyboard>_<keymap>_production.hex`
@@ -236,12 +238,12 @@ For Caterina on the `atmega32u4`, these are the fuse settings that you want:
| Fuse | Setting|
|----------|--------|
| Low | `0xFF` |
-| High | `0xD9` |
-| Extended | `0xC3` |
+| High | `0xD8` |
+| Extended | `0xCB` |
-To set this add `-U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xC3:m` to your command. So the final command should look something like:
+To set this add `-U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xCB:m` to your command. So the final command should look something like:
- avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i -U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xC3:m
+ avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i -U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xCB:m
If you are using a different controller or want different configuration, you can use [this AVR Fuse Calculator](http://www.engbedded.com/fusecalc/) to find a better value for you.