RAMA M6-B and IS31FL3218 driver (#4021)

* Initial RAMA M6-B commit.

* Moved IS31FL3218 driver, minor cleanups

* Refactor, added dynamic keymap.

* Added dynamic keymaps to RAMA M6-A

* Refactor M6-A and M6-B to use common code.

* Formatting

* Cleanup

* Cleanup

* Changes from review

18 files changed, 885 insertions, 378 deletions

diff --git a/drivers/issi/is31fl3218.c b/drivers/issi/is31fl3218.c
new file mode 100644
index 0000000000..db44f72564
--- /dev/null
+++ b/drivers/issi/is31fl3218.c
@@ -0,0 +1,102 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "is31fl3218.h"
+#include "i2c_master.h"
+
+// This is the full 8-bit address
+#define ISSI_ADDRESS 0b10101000
+
+// These are the register addresses
+#define ISSI_REG_SHUTDOWN 0x00
+#define ISSI_REG_PWM 0x01
+#define ISSI_REG_CONTROL 0x13
+#define ISSI_REG_UPDATE 0x16
+#define ISSI_REG_RESET 0x17
+
+// Default timeout if no I2C response
+#define ISSI_TIMEOUT 100
+
+// Reusable buffer for transfers
+uint8_t g_twi_transfer_buffer[20];
+
+// IS31FL3218 has 18 PWM outputs and a fixed I2C address, so no chaining.
+// If used as RGB LED driver, LEDs are assigned RGB,RGB,RGB,RGB,RGB,RGB
+uint8_t g_pwm_buffer[18];
+bool g_pwm_buffer_update_required = false;
+
+void IS31FL3218_write_register( uint8_t reg, uint8_t data )
+{
+	g_twi_transfer_buffer[0] = reg;
+	g_twi_transfer_buffer[1] = data;
+	i2c_transmit( ISSI_ADDRESS, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+}
+
+void IS31FL3218_write_pwm_buffer( uint8_t *pwm_buffer )
+{
+	g_twi_transfer_buffer[0] = ISSI_REG_PWM;
+	for ( int i=0; i<18; i++ ) {
+		g_twi_transfer_buffer[1+i] = pwm_buffer[i];
+	}
+	
+	i2c_transmit( ISSI_ADDRESS, g_twi_transfer_buffer, 19, ISSI_TIMEOUT);
+}
+
+void IS31FL3218_init(void)
+{
+	// In case we ever want to reinitialize (?)
+	IS31FL3218_write_register( ISSI_REG_RESET, 0x00 );
+	
+	// Turn off software shutdown
+	IS31FL3218_write_register( ISSI_REG_SHUTDOWN, 0x01 );
+
+	// Set all PWM values to zero
+	for ( uint8_t i = 0; i < 18; i++ ) {
+		IS31FL3218_write_register( ISSI_REG_PWM+i, 0x00 );
+	}
+	
+	// Enable all channels
+	for ( uint8_t i = 0; i < 3; i++ ) {
+		IS31FL3218_write_register( ISSI_REG_CONTROL+i, 0b00111111 );
+	}
+	
+	// Load PWM registers and LED Control register data
+	IS31FL3218_write_register( ISSI_REG_UPDATE, 0x01 );
+}
+
+void IS31FL3218_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+	g_pwm_buffer[index * 3 + 0] = red;
+	g_pwm_buffer[index * 3 + 1] = green;
+	g_pwm_buffer[index * 3 + 2] = blue;
+	g_pwm_buffer_update_required = true;
+}
+
+void IS31FL3218_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+	for ( int i = 0; i < 6; i++ ) {
+		IS31FL3218_set_color( i, red, green, blue );
+	}
+}
+
+void IS31FL3218_update_pwm_buffers(void)
+{
+	if ( g_pwm_buffer_update_required ) {
+		IS31FL3218_write_pwm_buffer( g_pwm_buffer );
+		// Load PWM registers and LED Control register data
+		IS31FL3218_write_register( ISSI_REG_UPDATE, 0x01 );
+	}
+	g_pwm_buffer_update_required = false;
+}
diff --git a/keyboards/rama/m6_a/keymaps/default/config.h b/drivers/issi/is31fl3218.h
index d150575c1a..2d24e51463 100644
--- a/keyboards/rama/m6_a/keymaps/default/config.h
+++ b/drivers/issi/is31fl3218.h
@@ -1,4 +1,4 @@
-/* Copyright 2018 Wilba
+/* Copyright 2018 Jason Williams (Wilba)
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,12 +13,12 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+#pragma once
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#include <stdint.h>
+#include <stdbool.h>
 
-#include "../../config.h"
-
-// place overrides here
-
-#endif
+void IS31FL3218_init(void);
+void IS31FL3218_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3218_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3218_update_pwm_buffers(void);
diff --git a/keyboards/rama/m6_a/config.h b/keyboards/rama/m6_a/config.h
index 0c5355f4a8..8d77f5339d 100644
--- a/keyboards/rama/m6_a/config.h
+++ b/keyboards/rama/m6_a/config.h
@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -187,4 +186,23 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-#endif
+#define RGB_BACKLIGHT_ENABLED 0
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x07
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+37)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 72
diff --git a/keyboards/rama/m6_a/keymaps/default/keymap.c b/keyboards/rama/m6_a/keymaps/default/keymap.c
index 6b15f3cd10..7a408fa8aa 100644
--- a/keyboards/rama/m6_a/keymaps/default/keymap.c
+++ b/keyboards/rama/m6_a/keymaps/default/keymap.c
@@ -3,322 +3,14 @@
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
     LAYOUT(
-        TO(1), KC_A, KC_B, KC_C, KC_D, KC_E),
+        KC_1, KC_2, KC_3, KC_4, KC_5, KC_6),
 
     LAYOUT(
-        TO(2), KC_F, KC_G, KC_H, KC_I, KC_J),
+        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
 
     LAYOUT(
-        TO(3), KC_K, KC_L, KC_M, KC_N, KC_O),
+        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
 
     LAYOUT(
-        TO(4), KC_P, KC_Q, KC_R, KC_S, KC_T),
+        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) };
 
-    LAYOUT(
-        TO(5), KC_U, KC_V, KC_W, KC_X, KC_Y),
-
-    LAYOUT(
-        TO(0), KC_Z, KC_1, KC_2, KC_3, KC_4)};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-    //keyevent_t event = record->event;
-
-    switch (id)
-    {
-    case 0:
-        if (record->event.pressed)
-        {
-            return MACRO(T(T), T(G), T(L), T(H), T(F), T(ENT), END);
-        }
-        break;
-    case 1:
-        if (record->event.pressed)
-        {
-            return MACRO(T(T), T(G), T(G), T(ENT), END);
-        }
-        break;
-    case 2:
-        if (record->event.pressed)
-        {
-            return MACRO(D(NO), T(L), U(NO), END);
-        }
-        break;
-    case 3:
-        if (record->event.pressed)
-        {
-            return MACRO(D(LCTL), T(Z), U(LCTL), END);
-        }
-        break;
-    case 4:
-        if (record->event.pressed)
-        {
-            return MACRO(D(LCTL), D(LSFT), T(Z), U(LSFT), U(LCTL), END);
-        }
-        break;
-    case 5:
-        if (record->event.pressed)
-        {
-            return MACRO(D(LCTL), T(X), U(LCTL), END);
-        }
-        break;
-    case 6:
-        if (record->event.pressed)
-        {
-            return MACRO(D(LCTL), T(C), U(LCTL), END);
-        }
-        break;
-    case 7:
-        if (record->event.pressed)
-        {
-            return MACRO(D(LCTL), T(V), U(LCTL), END);
-        }
-        break;
-    }
-    return MACRO_NONE;
-}
-
-// M6-A LEDs are connected to D6, B6, F5, B4, C7, F7
-// This is 1-based because I copied it from Knops code.
-void set_switch_led(int ledId, bool state)
-{
-    if (state)
-    {
-        switch (ledId)
-        {
-        case 1:
-            PORTD |= (1 << 6);
-            break;
-        case 2:
-            PORTB |= (1 << 6);
-            break;
-        case 3:
-            PORTF |= (1 << 5);
-            break;
-        case 4:
-            PORTB |= (1 << 4);
-            break;
-        case 5:
-            PORTC |= (1 << 7);
-            break;
-        case 6:
-            PORTF |= (1 << 7);
-            break;
-        }
-    }
-    else
-    {
-        switch (ledId)
-        {
-        case 1:
-            PORTD &= ~(1 << 6);
-            break;
-        case 2:
-            PORTB &= ~(1 << 6);
-            break;
-        case 3:
-            PORTF &= ~(1 << 5);
-            break;
-        case 4:
-            PORTB &= ~(1 << 4);
-            break;
-        case 5:
-            PORTC &= ~(1 << 7);
-            break;
-        case 6:
-            PORTF &= ~(1 << 7);
-            break;
-        }
-    }
-}
-
-void set_layer_led(int layerId)
-{
-    // UNUSED
-}
-
-void led_set_layer(int layer);
-
-void matrix_init_user(void)
-{
-    led_init_ports();
-    led_set_layer(0);
-}
-
-void matrix_scan_user(void)
-{
-}
-
-// M6-A LEDs are connected to D6, B6, F5, B4, C7, F7
-void led_init_ports()
-{
-    // Switch #1
-    DDRD |= (1 << 6);
-    PORTD &= ~(1 << 6);
-
-    // Switch #2
-    DDRB |= (1 << 6);
-    PORTB &= ~(1 << 6);
-
-    // Switch #3
-    DDRF |= (1 << 5);
-    PORTF &= ~(1 << 5);
-
-    // Switch #4
-    DDRB |= (1 << 4);
-    PORTB &= ~(1 << 4);
-
-    // Switch #5
-    DDRC |= (1 << 7);
-    PORTC &= ~(1 << 7);
-
-    // Switch #6
-    DDRF |= (1 << 7);
-    PORTF &= ~(1 << 7);
-}
-
-void led_set_user(uint8_t usb_led)
-{
-
-    if (usb_led & (1 << USB_LED_NUM_LOCK))
-    {
-    }
-    else
-    {
-    }
-
-    if (usb_led & (1 << USB_LED_CAPS_LOCK))
-    {
-    }
-    else
-    {
-    }
-
-    if (usb_led & (1 << USB_LED_SCROLL_LOCK))
-    {
-    }
-    else
-    {
-    }
-
-    if (usb_led & (1 << USB_LED_COMPOSE))
-    {
-    }
-    else
-    {
-    }
-
-    if (usb_led & (1 << USB_LED_KANA))
-    {
-    }
-    else
-    {
-    }
-}
-
-void led_set_layer(int layer)
-{
-    switch (layer)
-    {
-    case 0:
-        set_switch_led(1, true);
-        set_switch_led(2, false);
-        set_switch_led(3, false);
-        set_switch_led(4, false);
-        set_switch_led(5, false);
-        set_switch_led(6, false);
-        break;
-    case 1:
-        set_switch_led(1, false);
-        set_switch_led(2, true);
-        set_switch_led(3, false);
-        set_switch_led(4, false);
-        set_switch_led(5, false);
-        set_switch_led(6, false);
-        break;
-    case 2:
-        set_switch_led(1, false);
-        set_switch_led(2, false);
-        set_switch_led(3, true);
-        set_switch_led(4, false);
-        set_switch_led(5, false);
-        set_switch_led(6, false);
-        break;
-    case 3:
-        set_switch_led(1, false);
-        set_switch_led(2, false);
-        set_switch_led(3, false);
-        set_switch_led(4, true);
-        set_switch_led(5, false);
-        set_switch_led(6, false);
-        break;
-    case 4:
-        set_switch_led(1, false);
-        set_switch_led(2, false);
-        set_switch_led(3, false);
-        set_switch_led(4, false);
-        set_switch_led(5, true);
-        set_switch_led(6, false);
-        break;
-    case 5:
-        set_switch_led(1, false);
-        set_switch_led(2, false);
-        set_switch_led(3, false);
-        set_switch_led(4, false);
-        set_switch_led(5, false);
-        set_switch_led(6, true);
-        break;
-    default:
-        set_switch_led(1, true);
-        set_switch_led(2, true);
-        set_switch_led(3, true);
-        set_switch_led(4, true);
-        set_switch_led(5, true);
-        set_switch_led(6, true);
-        break;
-    }
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record)
-{
-    switch (keycode)
-    {
-    case TO(0):
-        if (record->event.pressed)
-        {
-            led_set_layer(0);
-        }
-        break;
-    case TO(1):
-        if (record->event.pressed)
-        {
-            led_set_layer(1);
-        }
-        break;
-    case TO(2):
-        if (record->event.pressed)
-        {
-            led_set_layer(2);
-        }
-        break;
-    case TO(3):
-        if (record->event.pressed)
-        {
-            led_set_layer(3);
-        }
-        break;
-    case TO(4):
-        if (record->event.pressed)
-        {
-            led_set_layer(4);
-        }
-        break;
-    case TO(5):
-        if (record->event.pressed)
-        {
-            led_set_layer(5);
-        }
-        break;
-    }
-    return true;
-}
diff --git a/keyboards/rama/m6_a/m6_a.c b/keyboards/rama/m6_a/m6_a.c
index 1c84ea2b83..fa19003600 100644
--- a/keyboards/rama/m6_a/m6_a.c
+++ b/keyboards/rama/m6_a/m6_a.c
@@ -1,4 +1,4 @@
-/* Copyright 2018 Wilba
+/* Copyright 2018 Jason Williams (Wilba)
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,32 +13,3 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "m6_a.h"
-/*
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-*/
diff --git a/keyboards/rama/m6_a/readme.md b/keyboards/rama/m6_a/readme.md
index 5dd2b92e19..ceaf6a88de 100644
--- a/keyboards/rama/m6_a/readme.md
+++ b/keyboards/rama/m6_a/readme.md
@@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment):
 
     make rama/m6_a:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
\ No newline at end of file
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/rama/m6_a/rules.mk b/keyboards/rama/m6_a/rules.mk
index ca2a2a5f80..ed85ac36d0 100644
--- a/keyboards/rama/m6_a/rules.mk
+++ b/keyboards/rama/m6_a/rules.mk
@@ -1,5 +1,7 @@
+# project specific files
+SRC =	keyboards/rama/m6_b/m6_b.c
+
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u4
 
 # Processor frequency.
@@ -38,31 +40,27 @@ F_USB = $(F_CPU)
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Boot Section
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/rama/m6_b/config.h b/keyboards/rama/m6_b/config.h
new file mode 100644
index 0000000000..1adaad3f9e
--- /dev/null
+++ b/keyboards/rama/m6_b/config.h
@@ -0,0 +1,129 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x5241 // "RW"
+#define PRODUCT_ID      0x006B // 6-B
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    RAMA.WORKS
+#define PRODUCT         RAMA M6-B
+#define DESCRIPTION     RAMA M6-B Macropad
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { E6 }
+#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x07
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+37)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 72
diff --git a/keyboards/rama/m6_b/info.json b/keyboards/rama/m6_b/info.json
new file mode 100644
index 0000000000..c88a3cc618
--- /dev/null
+++ b/keyboards/rama/m6_b/info.json
@@ -0,0 +1,19 @@
+{
+  "keyboard_name": "m6-b",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 3,
+  "height": 2,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        { "x": 0, "y": 0 },
+        { "x": 1, "y": 0 },
+        { "x": 2, "y": 0 },
+        { "x": 0, "y": 1 },
+        { "x": 1, "y": 1 },
+        { "x": 2, "y": 1 }
+      ]
+    }
+  }
+}
diff --git a/keyboards/rama/m6_b/keymaps/default/keymap.c b/keyboards/rama/m6_b/keymaps/default/keymap.c
new file mode 100644
index 0000000000..7a408fa8aa
--- /dev/null
+++ b/keyboards/rama/m6_b/keymaps/default/keymap.c
@@ -0,0 +1,16 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    LAYOUT(
+        KC_1, KC_2, KC_3, KC_4, KC_5, KC_6),
+
+    LAYOUT(
+        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
+
+    LAYOUT(
+        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
+
+    LAYOUT(
+        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) };
+
diff --git a/keyboards/rama/m6_b/m6_b.c b/keyboards/rama/m6_b/m6_b.c
new file mode 100644
index 0000000000..e7cd2f6287
--- /dev/null
+++ b/keyboards/rama/m6_b/m6_b.c
@@ -0,0 +1,230 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "m6_b.h"
+#include "m6_b_api.h"
+
+// Check that no backlight functions are called
+#if RGB_BACKLIGHT_ENABLED
+#include "rgb_backlight.h"
+#endif // RGB_BACKLIGHT_ENABLED
+
+#include "raw_hid.h"
+#include "dynamic_keymap.h"
+#include "timer.h"
+#include "tmk_core/common/eeprom.h"
+
+bool eeprom_is_valid(void)
+{
+	return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC &&
+			eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION);
+}
+
+void eeprom_set_valid(bool valid)
+{
+	eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF);
+	eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF);
+}
+
+void eeprom_reset(void)
+{
+	// Set the keyboard-specific EEPROM state as invalid.
+	eeprom_set_valid(false);
+	// Set the TMK/QMK EEPROM state as invalid.
+	eeconfig_disable();
+}
+
+#ifdef RAW_ENABLE
+
+void raw_hid_receive( uint8_t *data, uint8_t length )
+{
+	uint8_t *command_id = &(data[0]);
+	uint8_t *command_data = &(data[1]);
+	switch ( *command_id )
+	{
+		case id_get_protocol_version:
+		{
+			command_data[0] = PROTOCOL_VERSION >> 8;
+			command_data[1] = PROTOCOL_VERSION & 0xFF;
+			break;
+		}
+		case id_get_keyboard_value:
+		{
+			if ( command_data[0] == id_uptime )
+			{
+				uint32_t value = timer_read32();
+				command_data[1] = (value >> 24 ) & 0xFF;
+				command_data[2] = (value >> 16 ) & 0xFF;
+				command_data[3] = (value >> 8 ) & 0xFF;
+				command_data[4] = value & 0xFF;
+			}
+			else
+			{
+				*command_id = id_unhandled;
+			}
+			break;
+		}
+#ifdef DYNAMIC_KEYMAP_ENABLE
+		case id_dynamic_keymap_get_keycode:
+		{
+			uint16_t keycode = dynamic_keymap_get_keycode( command_data[0], command_data[1], command_data[2] );
+			command_data[3] = keycode >> 8;
+			command_data[4] = keycode & 0xFF;
+			break;
+		}
+		case id_dynamic_keymap_set_keycode:
+		{
+			dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] );
+			break;
+		}
+		case id_dynamic_keymap_reset:
+		{
+			dynamic_keymap_reset();
+			break;
+		}
+#endif // DYNAMIC_KEYMAP_ENABLE
+#if RGB_BACKLIGHT_ENABLED
+		case id_backlight_config_set_value:
+		{
+			//backlight_config_set_value(command_data);
+			break;
+		}
+		case id_backlight_config_get_value:
+		{
+			//backlight_config_get_value(command_data);
+			break;
+		}
+		case id_backlight_config_save:
+		{
+			//backlight_config_save();
+			break;
+		}
+#endif // RGB_BACKLIGHT_ENABLED
+		case id_eeprom_reset:
+		{
+			eeprom_reset();
+			break;
+		}
+		case id_bootloader_jump:
+		{
+			// Need to send data back before the jump
+			// Informs host that the command is handled
+			raw_hid_send( data, length );
+			// Give host time to read it
+			wait_ms(100);
+			bootloader_jump();
+			break;
+		}
+		default:
+		{
+			// Unhandled message.
+			*command_id = id_unhandled;
+			break;
+		}
+	}
+
+	// Return same buffer with values changed
+	raw_hid_send( data, length );
+
+}
+
+#endif
+
+void main_init(void)
+{
+	// If the EEPROM has the magic, the data is good.
+	// OK to load from EEPROM.
+	if (eeprom_is_valid()) {
+#if RGB_BACKLIGHT_ENABLED
+		//backlight_config_load();
+#endif // RGB_BACKLIGHT_ENABLED
+	} else	{
+#if RGB_BACKLIGHT_ENABLED
+		// If the EEPROM has not been saved before, or is out of date,
+		// save the default values to the EEPROM. Default values
+		// come from construction of the zeal_backlight_config instance.
+		//backlight_config_save();
+#endif // RGB_BACKLIGHT_ENABLED
+#ifdef DYNAMIC_KEYMAP_ENABLE
+		// This resets the keymaps in EEPROM to what is in flash.
+		dynamic_keymap_reset();
+#endif
+		// Save the magic number last, in case saving was interrupted
+		eeprom_set_valid(true);
+	}
+#if RGB_BACKLIGHT_ENABLED
+	// Initialize LED drivers for backlight.
+	backlight_init_drivers();
+
+	backlight_timer_init();
+	backlight_timer_enable();
+#endif // RGB_BACKLIGHT_ENABLED
+}
+
+void bootmagic_lite(void)
+{
+	// The lite version of TMK's bootmagic.
+	// 100% less potential for accidentally making the
+	// keyboard do stupid things.
+
+	// We need multiple scans because debouncing can't be turned off.
+	matrix_scan();
+	wait_ms(DEBOUNCING_DELAY);
+	wait_ms(DEBOUNCING_DELAY);
+	matrix_scan();
+
+	// If the Esc (matrix 0,0) is held down on power up,
+	// reset the EEPROM valid state and jump to bootloader.
+	if ( matrix_get_row(0) & (1<<0) ) {
+		eeprom_reset();
+		bootloader_jump();
+	}
+}
+
+void matrix_init_kb(void) {
+	bootmagic_lite();
+	main_init();
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+#if RGB_BACKLIGHT_ENABLED
+	// This only updates the LED driver buffers if something has changed.
+	backlight_update_pwm_buffers();
+#endif // BACKLIGHT_ENABLED
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	led_set_user(usb_led);
+}
+
+void suspend_power_down_kb(void)
+{
+#if RGB_BACKLIGHT_ENABLED
+	//backlight_set_suspend_state(true);
+#endif // BACKLIGHT_ENABLED
+}
+
+void suspend_wakeup_init_kb(void)
+{
+#if RGB_BACKLIGHT_ENABLED
+	//backlight_set_suspend_state(false);
+#endif // BACKLIGHT_ENABLED
+}
diff --git a/keyboards/rama/m6_b/m6_b.h b/keyboards/rama/m6_b/m6_b.h
new file mode 100644
index 0000000000..bd4158bcb1
--- /dev/null
+++ b/keyboards/rama/m6_b/m6_b.h
@@ -0,0 +1,28 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT(                         \
+    K00, K01, K02, K03, K04, K05)       \
+    {                                   \
+        {K00, K01, K02, K03, K04, K05}, \
+    }
+
diff --git a/keyboards/rama/m6_b/m6_b_api.h b/keyboards/rama/m6_b/m6_b_api.h
new file mode 100644
index 0000000000..041fd6e6ee
--- /dev/null
+++ b/keyboards/rama/m6_b/m6_b_api.h
@@ -0,0 +1,39 @@
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#define PROTOCOL_VERSION 0x0001
+
+enum m6_b_command_id
+{
+	id_get_protocol_version = 0x01, // always 0x01
+	id_get_keyboard_value,
+	id_set_keyboard_value,
+	id_dynamic_keymap_get_keycode,
+	id_dynamic_keymap_set_keycode,
+	id_dynamic_keymap_reset,
+	id_backlight_config_set_value,
+	id_backlight_config_get_value,
+	id_backlight_config_save,
+	id_eeprom_reset,
+	id_bootloader_jump,
+	id_unhandled = 0xFF,
+};
+
+enum m6_b_keyboard_value_id
+{
+	id_uptime = 0x01
+};
diff --git a/keyboards/rama/m6_b/readme.md b/keyboards/rama/m6_b/readme.md
new file mode 100644
index 0000000000..d6bdd0c4c2
--- /dev/null
+++ b/keyboards/rama/m6_b/readme.md
@@ -0,0 +1,15 @@
+# RAMA M6-B
+
+![RAMA M6-B](https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/59fc7b1053450adf5bf9a852/1515932239307/RAMA-RAMA-M6-DSA-XO-CAPS.73-3_1.jpg?format=1500w)
+
+A 6-key companion keyboard. [More info at RAMA WORKS](https://rama.works/m6a)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)  
+Hardware Supported: RAMA M6-B PCB  
+Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make rama/m6_b:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/rama/m6_b/rgb_backlight.c b/keyboards/rama/m6_b/rgb_backlight.c
new file mode 100644
index 0000000000..8f7ac06303
--- /dev/null
+++ b/keyboards/rama/m6_b/rgb_backlight.c
@@ -0,0 +1,139 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#if RGB_BACKLIGHT_ENABLED
+
+#include "rgb_backlight.h"
+//#include "rgb_backlight_api.h"
+
+#include <avr/io.h>
+#include <util/delay.h>
+#include <avr/interrupt.h>
+#include "progmem.h"
+
+#include "quantum/color.h"
+#include "drivers/avr/i2c_master.h"
+#include "drivers/issi/is31fl3218.h"
+
+bool g_suspend_state = false;
+
+// Global tick at 20 Hz
+uint32_t g_tick = 0;
+uint8_t g_config_effect_speed = 0;
+uint8_t g_config_brightness = 255;
+
+void backlight_update_pwm_buffers(void)
+{
+	IS31FL3218_update_pwm_buffers();
+}
+
+void backlight_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+	IS31FL3218_set_color( index, red, green, blue );
+}
+
+void backlight_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+	IS31FL3218_set_color_all( red, green, blue );
+}
+
+
+// This is (F_CPU/1024) / 20 Hz
+// = 15625 Hz / 20 Hz
+// = 781
+#define TIMER3_TOP 260
+
+void backlight_timer_init(void)
+{
+	static uint8_t backlight_timer_is_init = 0;
+	if ( backlight_timer_is_init )
+	{
+		return;
+	}
+	backlight_timer_is_init = 1;
+
+	// Timer 3 setup
+	TCCR3B = _BV(WGM32) | 			// CTC mode OCR3A as TOP
+			 _BV(CS32) | _BV(CS30); // prescale by /1024
+	// Set TOP value
+	uint8_t sreg = SREG;
+	cli();
+
+	OCR3AH = (TIMER3_TOP >> 8) & 0xff;
+	OCR3AL = TIMER3_TOP & 0xff;
+	SREG = sreg;
+}
+
+void backlight_timer_enable(void)
+{
+	TIMSK3 |= _BV(OCIE3A);
+}
+
+void backlight_timer_disable(void)
+{
+	TIMSK3 &= ~_BV(OCIE3A);
+}
+
+void backlight_set_suspend_state(bool state)
+{
+	g_suspend_state = state;
+}
+
+void backlight_effect_cycle_all(void)
+{
+	uint8_t hueOffset = ( g_tick << g_config_effect_speed ) & 0xFF;
+	uint8_t satOffset = 127;
+	// Relies on hue being 8-bit and wrapping
+	for ( int i=0; i<6; i++ )
+	{
+		HSV hsv = { .h = hueOffset, .s = satOffset, .v = g_config_brightness };
+		RGB rgb = hsv_to_rgb( hsv );
+		backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+	}
+}
+
+ISR(TIMER3_COMPA_vect)
+{
+	// delay 1 second before driving LEDs or doing anything else
+	static uint8_t startup_tick = 0;
+	if ( startup_tick < 20 )
+	{
+		startup_tick++;
+		return;
+	}
+
+	g_tick++;
+
+	if ( g_suspend_state )
+	{
+		backlight_set_color_all( 0, 0, 0 );
+	}
+	else
+	{
+		//HSV hsv = { .h = 240, .s = 255, .v = g_config_brightness };
+		//RGB rgb = hsv_to_rgb( hsv );
+		//backlight_set_color_all( rgb.r, rgb.g, rgb.b );
+		backlight_effect_cycle_all();
+	}
+}
+
+void backlight_init_drivers(void)
+{
+	// Initialize I2C
+	i2c_init();
+	IS31FL3218_init();
+}
+
+#endif // RGB_BACKLIGHT_ENABLED
diff --git a/keyboards/rama/m6_b/rgb_backlight.h b/keyboards/rama/m6_b/rgb_backlight.h
new file mode 100644
index 0000000000..bbf605284b
--- /dev/null
+++ b/keyboards/rama/m6_b/rgb_backlight.h
@@ -0,0 +1,34 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#if RGB_BACKLIGHT_ENABLED
+#else
+#error rgb_backlight.h included when RGB_BACKLIGHT_ENABLED == 0
+#endif // RGB_BACKLIGHT_ENABLED
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#include "quantum/color.h"
+
+void backlight_init_drivers(void);
+void backlight_update_pwm_buffers(void);
+void backlight_timer_init(void);
+void backlight_timer_enable(void);
+void backlight_timer_disable(void);
+void backlight_set_suspend_state(bool state);
+
diff --git a/keyboards/rama/m6_b/rules.mk b/keyboards/rama/m6_b/rules.mk
new file mode 100644
index 0000000000..8226debd45
--- /dev/null
+++ b/keyboards/rama/m6_b/rules.mk
@@ -0,0 +1,77 @@
+# project specific files
+SRC =	rgb_backlight.c \
+		quantum/color.c \
+		drivers/issi/is31fl3218.c \
+		drivers/avr/i2c_master.c
+
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+CIE1931_CURVE = yes
diff --git a/quantum/dynamic_keymap.c b/quantum/dynamic_keymap.c
index 2c989d6918..ee39a20251 100644
--- a/quantum/dynamic_keymap.c
+++ b/quantum/dynamic_keymap.c
@@ -17,7 +17,7 @@
 #include "config.h"
 #include "keymap.h" // to get keymaps[][][]
 #include "tmk_core/common/eeprom.h"
-#include "progmem.h"// to read default from flash
+#include "progmem.h" // to read default from flash
 
 #include "dynamic_keymap.h"