summaryrefslogtreecommitdiff
path: root/tmk_core
AgeCommit message (Collapse)Author
2021-02-07Migrate some tmk_core files to quantum (#11791)Joel Challis
* Migrate some tmk_core files to quantum * Fix build errors
2021-02-06Manual formatting fix for serial_uart.c (#11806)Ryan
2021-02-06Serial refactor (#11521)Ryan
2021-02-05Manually run formatting job (#11797)Joel Challis
2021-02-03Fix DEBUG_MATRIX_SCAN_RATE on chibiOS when console is enabled (#11776)Drashna Jaelre
* Fix DEBUG_MATRIX_SCAN_RATE on chibiOS when console is enabled * update type in dprintf Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2021-01-28add get_matrix_scan_rate() to tmk_core/common/keyboard.c (#11489)Takeshi ISHII
2021-01-19Fixup declaration for _kill, add other missing syscalls, populate errno. ↵Nick Brassel
(#11608)
2021-01-18Add syscall fallbacks to ChibiOS builds (#11573)Nick Brassel
* Add fallback syscalls to ChibiOS builds that are present but able to be overridden as appropriate. * Modified location to be ChibiOS-specific.
2021-01-15Adafruit BLE cleanups (#11556)Ryan
2021-01-15arm_atsam: temporarily lower raw HID endpoint/report size (#11554)Ryan
2021-01-11Add support for shared EP on V-USB boards (#11103)Ryan
2021-01-11Lighting Layers should be disabled when suspended (#11442)Joshua Diamond
* Lighting Layers should be disabled when suspended * bugfixes
2021-01-10manually run formatting job (#11503)Joel Challis
2021-01-06Add build debug option to tmk_core/rules.mk (#11324)Takeshi ISHII
* Add DUMP_C_MACROS to tmk_core/rules.mk * update DUMP_C_MACROS * add VERBOSE_LD_CMD, VERBOSE_AS_CMD * add VERBOSE_C_CMD, VERBOSE_C_INCLUDE * update DUMP_C_MACROS, VERBOSE_C_INCLUDE, VERBOSE_C_CMD
2021-01-04Fix Tap-Hold Configs (#11127)Drashna Jaelre
* Add proper prototypes for Tap-Hold Per Key functions * Fix handwired/tennie default keymap * Remove unneeded references * Fix tapping term per key check in space cadet * Pre-emptive fix for tap dance * Fix marksard/leftover30 * Replace hard coded tapping term with define
2021-01-04arm_atsam: Use PROGRAM_CMD for :flash target if set (#11424)Joel Elkins
2021-01-01Manually run formatting CI process (#11375)Joel Challis
2020-12-31Add target 'check-md5' to `build_keyboard.mk` (#11338)Takeshi ISHII
* Add target 'build-for-compare' to `build_keyboard.mk` The `build-for-compare` target provides an easy way to check the md5 checksum of the generated binary. You can easily see if there is any change in the generated binaries between the two versions, as in the example below. ``` $ git checkout 0.11.0 M build_keyboard.mk M tmk_core/rules.mk Note: checking out '0.11.0'. HEAD is now at c66df1664 2020 November 28 Breaking Changes Update (#11053) $ make helix:all:build-for-compare | grep ^MD5 MD5 (.build/helix_rev2_default.hex) = 5c3606562c944bb4d18832e601b45d4a MD5 (.build/helix_rev2_edvorakjp.hex) = 9e43d13d389d518ba7e99cd7337e28d6 MD5 (.build/helix_rev2_five_rows.hex) = 8bcb61c2fd5d237c2997f2fa007d4934 MD5 (.build/helix_rev2_five_rows_jis.hex) = b97cd818d52f73ca2d4e78c86d90a791 MD5 (.build/helix_rev2_froggy.hex) = c492172364188f4e2918b10bf0f3a0a6 MD5 (.build/helix_rev2_froggy_106.hex) = b0861fd735a8f81881a8c02730641a2b MD5 (.build/helix_rev2_led_test.hex) = 5c97d982a5da5cfb3dacb28a8934b81d MD5 (.build/helix_rev2_xulkal.hex) = 01f603dc46bcf9094d7e106831d8f5b1 MD5 (.build/helix_rev2_yshrsmz.hex) = 5a008bca2d0c5790a151c02834c529ba $ git checkout 0.11.1 M build_keyboard.mk M tmk_core/rules.mk Previous HEAD position was c66df1664 2020 November 28 Breaking Changes Update (#11053) HEAD is now at cc08e3082 nix-shell: add milc dependency (#11086) $ make helix:all:build-for-compare | grep ^MD5 MD5 (.build/helix_rev2_default.hex) = 5c3606562c944bb4d18832e601b45d4a MD5 (.build/helix_rev2_edvorakjp.hex) = 9e43d13d389d518ba7e99cd7337e28d6 MD5 (.build/helix_rev2_five_rows.hex) = 8bcb61c2fd5d237c2997f2fa007d4934 MD5 (.build/helix_rev2_five_rows_jis.hex) = b97cd818d52f73ca2d4e78c86d90a791 MD5 (.build/helix_rev2_froggy.hex) = c492172364188f4e2918b10bf0f3a0a6 MD5 (.build/helix_rev2_froggy_106.hex) = b0861fd735a8f81881a8c02730641a2b MD5 (.build/helix_rev2_led_test.hex) = 5c97d982a5da5cfb3dacb28a8934b81d MD5 (.build/helix_rev2_xulkal.hex) = d848383adfd7463b138c6da179cf1436 MD5 (.build/helix_rev2_yshrsmz.hex) = 5a008bca2d0c5790a151c02834c529ba ``` * make builds reproducable by default * update build_keyboard.mk: remove 'build-for-compare' target * GNU make (3.81) on macOS 10.14(Mojave) does not have the 'undefine' directive. * Adopted fauxpark's suggestion. * Update tmk_core/rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * update tmk_core/rules.mk * fix tmk_core/rules.mk Co-authored-by: Zach White <skullydazed@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-12-30Missed a couple more `#pragma once`s (#11351)Ryan
2020-12-30Remove useless wait in AVR suspend code (#11352)Ryan
2020-12-29Remove MATRIX_IS_ON macro (#11330)xyzz
* Remove MATRIX_IS_ON macro this macro is both incorrect and excessive given that macro_is_on() exists * Remove massdrop matrix.h
2020-12-28Ensure single newline at EOF for core files (#11310)Ryan
2020-12-26Change include guards in tmk_core/ and drivers/ to pragma once (#11240)Ryan
2020-12-23chibios: honor PLATFORMASM in chibios build (#11219)Reza Jelveh
2020-12-23V-USB: Fix initial dropped keypress (#11263)Ryan
2020-12-21Fix small typo in V-USB configuration descriptor (#11253)Ryan
2020-12-17Run cformat and dos2unix manually (#11235)Ryan
2020-12-16Normalise include statements in keyboard code (#11185)Ryan
2020-12-11Normalise include statements in core code (#11153)Ryan
* Normalise include statements in core code * Missed one
2020-12-05Omit serial number if not defined (#11104)Ryan
2020-11-30Fix int wrapping for timer_expired macros and use MAX defines for ↵XScorpion2
consistency and clarity (#10996)
2020-11-282020 November 28 Breaking Changes Update (#11053)James Young
* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-22Remove references to ch-bootloader-jump.patch (#10998)Joel Challis
2020-11-18Add references for is_keyboard_left() (#10850)Drashna Jaelre
* Add references for is_keyboard_left() * Remove proto from bootmagic_lite.c
2020-11-09Update massdrop/alt and arm_atsam/led_matrix to fix #10813 (#10818)Chris Merrill
* Update massdrop/alt keyboard to fix Caps Lock LED flickering. * Fix Caps-lock LED during underglow-only for massdrop/ctrl * Update keyboards/massdrop/ctrl/keymaps/default/keymap.c
2020-11-08Indicator LEDs as config (#10816)Joel Challis
* First pass * Add config options to docs * Update some wording * Slight tidy up of backlight caps logic * Init pin to correct state * Move init location * Reverse default state
2020-10-27Fix KEYBOARD_SHARED_EP incompatibility with VIA (#9930)Sergey Vlasov
The `KEYBOARD_SHARED_EP=yes` option was breaking the VIA support, because the raw HID interface number in this case was 0 instead of 1, and the VIA app depends on the exact interface number for raw HID. Change the interface ordering to put the shared interface before the raw HID interface if `KEYBOARD_SHARED_EP` is enabled, so that the raw HID interface can keep its number.
2020-10-22Added EEPROM emulation for STM32F042x6 series processors (#10685)Adrian
* Added STM32F042x6 support for EEPROM emulation * Default to lower stack size on STM32F042 * Moved stack setting * Re-moved stack definition * Removed unnecessary check
2020-09-22Add description in Bluetooth docs for requiring NKRO to be disabled (#10359)Peter Landoll
2020-09-17Output an error message if LINK_TIME_OPTIMIZATION_ENABLE is set but ↵David Cuthbert
LTO_ENABLE is not (#10217) * Output an error message if LINK_TIME_OPTIMIZATION_ENABLE is set but LTO_ENABLE is not. * Update common.mk Specify that LINK_TIME_OPTIMZATION_ENABLE has been renamed, not deprecated.
2020-09-13[fix] dfu-programmer <0.7 doesn't support --force flag (#10292)Frans de Jonge
Fixes <https://github.com/qmk/qmk_firmware/issues/10286>.
2020-09-10Use the force when flashing with dfu-programmer (#10070)Ryan
2020-08-29format code according to conventions [skip ci]QMK Bot
2020-08-29Remove support for Adafruit EZ-Key (#10103)Ryan
* Remove support for Adafruit EZ-Key * Update docs/ja/feature_bluetooth.md Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
2020-08-29Kiibohd bootloader, take 2 (#10129)Ryan
2020-08-29Better handle LTO_ENABLE (#9832)Drashna Jaelre
* Better handle LTO_ENABLE Especially when calling from command line * Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE * Remove long for LTO from show_options.mk
2020-08-29More Bluetooth refactoring (#9905)Ryan
2020-08-29Update vusb to match 3rd endpoint. (#9020)yiancar
* Update vusb to match 3rd endpoint. - With the addition of https://github.com/qmk/v-usb/pull/1 a 3rd endpoint (endpoint4) becomes available. - We can assign mouse/extrakeys to that endpoint as its a desirable feature and leave rawhid and console to compete for the 2nd endpoint. NOTE: The version of vusb.c in future branch is older than master. Just remember that it will need a #error if both raw_hid and console are enabled at the same time. * Final Fixes * Update tmk_core/protocol/vusb/vusb.c * Update tmk_core/protocol/vusb/vusb.c * Update tmk_core/protocol/vusb/usbconfig.h * Update tmk_core/protocol/vusb/usbconfig.h * Update tmk_core/protocol/vusb/usbconfig.h * Update tmk_core/protocol/vusb/usbconfig.h * Updated vusb submodule to latest commit
2020-08-29Add ability to dump all makefile variables for the specified target. (#8256)Nick Brassel
2020-08-29Add `st-flash` flash target (#9964)Sergey Vlasov
* Add `st-flash` flash target Add support for flashing the firmware via the `st-flash` utility from the STLink Tools package (https://github.com/stlink-org/stlink). * Add `st-flash` to the `qmk flash -b` output