summaryrefslogtreecommitdiff
path: root/tmk_core
AgeCommit message (Collapse)Author
2020-12-05Merge remote-tracking branch 'origin/master' into developQMK Bot
2020-12-05Omit serial number if not defined (#11104)Ryan
2020-12-03Add board specific to Proton-C, with usual defaults turned on. (#10976)Nick Brassel
- Set all other ChibiOS defaults to 'off', when not targeting Proton-C - Modified all existing F303 boards to point at the QMK_PROTON_C to ensure repeatable binary output - Modified version.h generation so that SKIP_VERSION=yes generates the same output
2020-12-01[Split] Sync Timer feature (#10997)XScorpion2
A timer that is kept in sync between the halves of a split keyboard
2020-11-30Fix int wrapping for timer_expired macros and use MAX defines for ↵XScorpion2
consistency and clarity (#10996)
2020-11-282020 November 28 Breaking Changes Update (#11053)James Young
* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-22Remove references to ch-bootloader-jump.patch (#10998)Joel Challis
2020-11-18Add references for is_keyboard_left() (#10850)Drashna Jaelre
* Add references for is_keyboard_left() * Remove proto from bootmagic_lite.c
2020-11-09Update massdrop/alt and arm_atsam/led_matrix to fix #10813 (#10818)Chris Merrill
* Update massdrop/alt keyboard to fix Caps Lock LED flickering. * Fix Caps-lock LED during underglow-only for massdrop/ctrl * Update keyboards/massdrop/ctrl/keymaps/default/keymap.c
2020-11-08Indicator LEDs as config (#10816)Joel Challis
* First pass * Add config options to docs * Update some wording * Slight tidy up of backlight caps logic * Init pin to correct state * Move init location * Reverse default state
2020-10-27Fix KEYBOARD_SHARED_EP incompatibility with VIA (#9930)Sergey Vlasov
The `KEYBOARD_SHARED_EP=yes` option was breaking the VIA support, because the raw HID interface number in this case was 0 instead of 1, and the VIA app depends on the exact interface number for raw HID. Change the interface ordering to put the shared interface before the raw HID interface if `KEYBOARD_SHARED_EP` is enabled, so that the raw HID interface can keep its number.
2020-10-22Added EEPROM emulation for STM32F042x6 series processors (#10685)Adrian
* Added STM32F042x6 support for EEPROM emulation * Default to lower stack size on STM32F042 * Moved stack setting * Re-moved stack definition * Removed unnecessary check
2020-09-22Add description in Bluetooth docs for requiring NKRO to be disabled (#10359)Peter Landoll
2020-09-17Output an error message if LINK_TIME_OPTIMIZATION_ENABLE is set but ↵David Cuthbert
LTO_ENABLE is not (#10217) * Output an error message if LINK_TIME_OPTIMIZATION_ENABLE is set but LTO_ENABLE is not. * Update common.mk Specify that LINK_TIME_OPTIMZATION_ENABLE has been renamed, not deprecated.
2020-09-13[fix] dfu-programmer <0.7 doesn't support --force flag (#10292)Frans de Jonge
Fixes <https://github.com/qmk/qmk_firmware/issues/10286>.
2020-09-10Use the force when flashing with dfu-programmer (#10070)Ryan
2020-08-29format code according to conventions [skip ci]QMK Bot
2020-08-29Remove support for Adafruit EZ-Key (#10103)Ryan
* Remove support for Adafruit EZ-Key * Update docs/ja/feature_bluetooth.md Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
2020-08-29Kiibohd bootloader, take 2 (#10129)Ryan
2020-08-29Better handle LTO_ENABLE (#9832)Drashna Jaelre
* Better handle LTO_ENABLE Especially when calling from command line * Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE * Remove long for LTO from show_options.mk
2020-08-29More Bluetooth refactoring (#9905)Ryan
2020-08-29Update vusb to match 3rd endpoint. (#9020)yiancar
* Update vusb to match 3rd endpoint. - With the addition of https://github.com/qmk/v-usb/pull/1 a 3rd endpoint (endpoint4) becomes available. - We can assign mouse/extrakeys to that endpoint as its a desirable feature and leave rawhid and console to compete for the 2nd endpoint. NOTE: The version of vusb.c in future branch is older than master. Just remember that it will need a #error if both raw_hid and console are enabled at the same time. * Final Fixes * Update tmk_core/protocol/vusb/vusb.c * Update tmk_core/protocol/vusb/vusb.c * Update tmk_core/protocol/vusb/usbconfig.h * Update tmk_core/protocol/vusb/usbconfig.h * Update tmk_core/protocol/vusb/usbconfig.h * Update tmk_core/protocol/vusb/usbconfig.h * Updated vusb submodule to latest commit
2020-08-29Add ability to dump all makefile variables for the specified target. (#8256)Nick Brassel
2020-08-29Add `st-flash` flash target (#9964)Sergey Vlasov
* Add `st-flash` flash target Add support for flashing the firmware via the `st-flash` utility from the STLink Tools package (https://github.com/stlink-org/stlink). * Add `st-flash` to the `qmk flash -b` output
2020-08-29Fix joystick compile issues (#9949)Ryan
2020-08-29Initialize Layer State on startup (#8318)Drashna Jaelre
* Initialize Layer State on startup Right now, on startup, the default layer state gets called and set, triggering the callback functions for the default layer state. However, the normal layer state never actually gets initialized. It's set to 0 directly, by default, but the callback functions are never actually called. This creates some inconsistency in the behavior for end users. This adds a simple "clear" that triggers the callback on startup. This should produce more consisten behavior between the two functions and layer masks. * Stupid hack * Fix type casting? * Fix compile issues with magic is disabled
2020-08-29Hid joystick interface (#4226)a-chol
* add support for hid gamepad interface add documentation for HID joystick Add joystick_task to read analog axes values even when no key is pressed or release. update doc Update docs/feature_joystick.md Manage pin setup and read to maintain matrix scan after analog read * Incorporates patches and changes to HID reporting There are some patches provided by @a-chol incorporated on this commit, and also some changes I made to the HID Report structure. The most interesting is the one dealing with number of buttons: Linux doesn't seem to care, but Windows requires the HID structure to be byte aligned (that's in the spec). So if one declares 8/16/32... buttons they should not have any issues, but this is what happens when you have 9 buttons: ``` bits |0|1|2|3|4|5|6|7| |*|*|*|*|*|*|*|*| axis 0 (report size 8) |*|*|*|*|*|*|*|*| ... |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| axis 6 |*|*|*|*|*|*|*|*| first 8 buttons (report size 1) |*| | | | | | | | last of 9 buttons, not aligned ``` So for that I added a conditonal that will add a number of reports with size 1 to make sure it aligns to the next multiple of 8. Those reports send dummy inputs that don't do anything aside from aligning the data. Tested on Linux, Windows 10 and Street Fighter (where the joystick is recognized as direct-input) * Add save and restore of each pin used in reading joystick (AVR). Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc instead of an output pin from the MCU. Fix joystick report id Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes) Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis. Documentation fixes * Fix port addressing for joystick analog read * The other required set of changes As per the PR, the changes still holding it up. Add onekey for testing. Fix ARM builds. Fix device descriptor when either axes or buttons is zero. Add compile-time check for at least one axis or button. Move definition to try to fix conflict. PR review comments. qmk cformat * avoid float functions to compute range mapping for axis adc reading * Remove V-USB support for now. Updated docs accordingly. * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios * Fix HID joystick report sending for ChibiOS. Add one analog axis to the onekey:joystick keymap. Fix pin state save and restore during joystick analog read for STM32 MCUs. * Update tmk_core/protocol/chibios/usb_main.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add missing mcuconf.h and halconf.h to onekey:joystick keymap. Add suggested fixes from PR. * Switch saveState and restoreState signature to use pin_t type. onekey:joystick : add a second axis, virtual and programmatically animated. * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Add PR corrections * Remove halconf.h and mcuconf.h from onekey keymaps * Change ADC_PIN to A0 Co-authored-by: achol <allecooll@hotmail.com> Co-authored-by: José Júnior <jose.junior@gmail.com> Co-authored-by: a-chol <achol@notamail.com> Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-08-29Disable NKRO on V-USB controllers (#9054)Drashna Jaelre
* Disable NKRO on V-USB controllers * not _currently_ supported text Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-08-29Re-fix the STM32 dual-bank bootloader stuff. (#9738)Nick Brassel
* Re-fix the dual-bank bootloader stuff. * Use wait_ms() instead of using nop's for a delay, as ChibiOS is actually running at the time of bootloader jump.
2020-08-29Add dual-bank STM32 bootloader support, given GPIO toggle on BOOT0 to charge ↵Nick Brassel
RC circuit. (#8778)
2020-08-29Fix the mousekey scrolling (#9174)dhong44
Mousekey scrolling should have a separate repeat variable to keep track of scrolling acceleration, instead of being tied to mouse movement scolling in mousekeys. The send function should record when the last movement was made since this is when movement is actually sent. Doing this fixes the bug where the initial press of a mousekey scroll button causes a double scroll. Signed-off-by: Daniel Hong <daniel.hong@live.com>
2020-08-29Change analogRead calls to analogReadPin (#9023)Ryan
* Change analogRead calls to analogReadPin * Add ChangeLog * Update docs, remove mention of `analogRead()` * Retarget changelog for next round
2020-08-29`qmk cformat` on `develop` (#9501)Nick Brassel
2020-08-29Don't compile outputselect.c if Bluetooth is disabled (#9356)Ryan
2020-08-29Additional cleanups for V-USB code (#9310)Ryan
2020-08-29Convert `CONSUMER2BLUEFRUIT()` and `CONSUMER2RN42()` macros to static inline ↵Ryan
functions (#9055)
2020-08-29Various tidyups for USB descriptor code (#9005)Ryan
2020-08-29Initial work for consolidation of ChibiOS platform files (#8327)Nick Brassel
* Initial work for consolidation of board files and default ChibiOS configs. * Migrate F401/F411 black pills for testing. * Add early init bootloader jump flag. * Add support for I2C in order to use i2c_scanner keymap. * Add F401/F411 HSE bypass to get things booting. * Exempt "hooked" ChibiOS conf files from updater script. * Fix up ordering for bootloader_defs file check. * Match previous $(KEYBOARD_PATHS) value for Proton-C, updated for all board configs.
2020-08-29Remove iWRAP protocol (#9284)Ryan
2020-08-26Fix ChibiOS backlight not turning off on suspend (#10114)Ryan
* Fix ChibiOS backlight not turning off on suspend * Add missing code for backlight as caps lock too
2020-08-21Revert "Add Kiibohd bootloader type to bootloader.mk (#9908)" (#10126)Nick Brassel
This reverts commit e2d4cd1a41c667da186891e3dbaf535c6b0717df.
2020-08-12Add Kiibohd bootloader type to bootloader.mk (#9908)Ryan
2020-08-08[Bug] Fix Swap Hands bug introduced by OSH (#9968)Drashna Jaelre
Fixes the handling for the oneshot cleanup, so it only cleans up if it is active. It should not cleanup of SHO is off (eg using a normal oneshot key), nor if it's actively pressed or used. Previous behavior BROKE swap hand key.
2020-07-25format code according to conventions [skip ci]QMK Bot
2020-07-26Enable OLED support for Teensy 3.2/LC (#7591)Joel Challis
* I2C_TIMEOUT is not defined on arm teensy * Work round teensy having different ChibiOS config options * Stash OLED conf files * update comment * update comment * Remove stm32 alias to allow teensy alt mode
2020-07-21format code according to conventions [skip ci]QMK Bot
2020-07-21Implemented New MK_COMBINED Functionality (#9557)nathanvercaemert
* implemented new mousekey_combined functionality * minor formatting change to documentation * Update tmk_core/common/mousekey.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update tmk_core/common/mousekey.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update tmk_core/common/mousekey.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update tmk_core/common/mousekey.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update docs/feature_mouse_keys.md Co-authored-by: Nick Brassel <nick@tzarc.org> * Update docs/feature_mouse_keys.md Co-authored-by: Nick Brassel <nick@tzarc.org> * Update docs/feature_mouse_keys.md Co-authored-by: Nick Brassel <nick@tzarc.org> * Update docs/feature_mouse_keys.md Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Nathan Vercaemert <nathan.vercaemert@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Nick Brassel <nick@tzarc.org>
2020-07-16Remove `DESCRIPTION` (#9732)Ryan
2020-07-07Add TAP_CODE_DELAY to Mod-Tap (#9422)Sven Grunewaldt
2020-07-02Add movement hook to ps2_mouse (#8805)Manna Harbour
Process mouse movement in the keymap before it is sent to the host. Example uses include filtering noise, adding acceleration, and automatically activating a layer. To use, define the following function in your keymap: void ps2_mouse_moved_user(report_mouse_t *mouse_report);