summaryrefslogtreecommitdiff
path: root/tmk_core/common/avr
AgeCommit message (Collapse)Author
2021-05-292021 May 29 Breaking Changes Update (#13034)James Young
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-03-25Fix USER_PRINT on avr/atsam (#12269)Joel Challis
* Fix USER_PRINT on avr/atsam * Update tmk_core/common/arm_atsam/_print.h Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2021-02-25Merge remote-tracking branch 'upstream/master' into developfauxpark
2021-02-25V-USB suspend refactor (#11891)Ryan
2021-02-14Merge branch 'master' into developJoshua Diamond
2021-02-15Format code according to conventions (#11905)github-actions[bot]
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-02-14Refactor platform logic within print.h (#11863)Joel Challis
* Remove GCC check from debug * Remove platform logic from common.mk * Refactor platform logic within print.h * restore debug.c format * headers * Rename function pointer type * review comments * Update tmk_core/common/printf.c Co-authored-by: Nick Brassel <nick@tzarc.org> * Format Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-02-14Split gpio and atomic to platform (#11792)Joel Challis
2021-02-02Address wake from sleep instability (#11450)Joshua Diamond
* resolve race condition between suspend and wake in LUFA * avoid multiple calls to suspend_power_down() / suspend_wakeup_init() * Remove duplicate suspend_power_down_kb() call * pause on wakeup to wait for USB state to settle * need the repeated suspend_power_down() (that's where the sleep is) * more efficient implementation * fine tune the pause after sending wakeup * speculative chibios version of pause-after-wake * make wakeup delay configurable, and adjust value * better location for wakeup delay
2021-02-01Stop sounds when suspended (#11553)Joshua Diamond
* fix stopping audio on suspend vs. startup sound * trim firmware size * fix stuck audio on startup (ARM)
2021-01-17`qmk cformat`Nick Brassel
2021-01-11Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-01-11Lighting Layers should be disabled when suspended (#11442)Joshua Diamond
* Lighting Layers should be disabled when suspended * bugfixes
2021-01-04Set avr's bootloader_jump function to be weak (#11418)Dasky
Co-authored-by: Dasky <dasky@nowhere>
2020-12-30Remove useless wait in AVR suspend code (#11352)Ryan
2020-12-28Ensure single newline at EOF for core files (#11310)Ryan
2020-12-26Change include guards in tmk_core/ and drivers/ to pragma once (#11240)Ryan
2020-06-10adds support for the atmega328 (#9043)itsnoteasy
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-04-02format code according to conventions [skip ci]QMK Bot
2020-04-02Initial support for ATtiny85 (#8632)Joel Challis
* Initial support for ATtiny85 * Update mcu selection
2020-03-26Enable SLEEP_LED on ATmega32A (#8531)Joel Challis
* Port over some AVR backlight logic to SLEEP_LED * Port over some AVR backlight logic to SLEEP_LED - add timer 3 * Port over some AVR backlight logic to SLEEP_LED - clang format * Enable SLEEP_LED within vusb protocol
2020-03-10Refactor rgblight_reconfig.h (#7773)Takeshi ISHII
* Moved contents of rgblight_reconfig.h to rgblight_post_config.h. In #3582, rgblight_reconfig.h had to be newly created. Now, the build system of qmk_firmware has a post_cofig feature, so that what was done in rgblight_reconfig.h can now be realized in rgblight_post_config.h. **This commit does not change the build result.** Testing script ```shell # build on master git checkout master echo master > /tmp/master_md5.txt # RGBLIGHT_ENABLE = no make HELIX=verbose helix/rev2:default:clean make HELIX=verbose helix/rev2:default md5 helix_rev2_default.hex >> /tmp/master_md5.txt # RGBLIGHT_ENABLE = yes, with animations make HELIX=verbose helix/rev2/back:default:clean make HELIX=verbose helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/master_md5.txt # RGBLIGHT_ENABLE = yes, without animations make HELIX=verbose,no_ani helix/rev2/back:default:clean make HELIX=verbose,no_ani helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/master_md5.txt # build on refactor_rgblight_reconfig.h git checkout refactor_rgblight_reconfig.h echo refactor_rgblight_reconfig.h > /tmp/branch_md5.txt # RGBLIGHT_ENABLE = no make HELIX=verbose helix/rev2:default:clean make HELIX=verbose helix/rev2:default md5 helix_rev2_default.hex >> /tmp/branch_md5.txt # RGBLIGHT_ENABLE = yes, with animations make HELIX=verbose helix/rev2/back:default:clean make HELIX=verbose helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/branch_md5.txt # RGBLIGHT_ENABLE = yes, without animations make HELIX=verbose,no_ani helix/rev2/back:default:clean make HELIX=verbose,no_ani helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/branch_md5.txt diff -u /tmp/master_md5.txt /tmp/branch_md5.txt ``` Test result: ``` --- /tmp/master_md5.txt 2020-01-03 15:42:22.000000000 +0900 +++ /tmp/branch_md5.txt 2020-01-03 15:42:42.000000000 +0900 @@ -1,4 +1,4 @@ -master +refactor_rgblight_reconfig.h MD5 (helix_rev2_default.hex) = f360032edd522448366d471d8f4f8181 MD5 (helix_rev2_back_default.hex) = 0c663acc6cccc44476b3b969ad22a48f MD5 (helix_rev2_back_default.hex) = e66b1195ff6d38e6e22c975b8ae42fd3 ``` * Expressions that are too long are difficult to read, so wrap them. * Edit the expression again * remove `defined(RGBLIGHT_ANIMATIONS)` in `tmk_core/common/*/suspend.c`, `tmk_core/protocol/*/main.c` move contents of rgblight_reconfig.h to rgblight.h. The following changes were made to rgblight.h. ```diff +#ifdef RGBLIGHT_USE_TIMER void rgblight_task(void); void rgblight_timer_init(void); void rgblight_timer_enable(void); void rgblight_timer_disable(void); void rgblight_timer_toggle(void); +#else +#define rgblight_task() +#define rgblight_timer_init() +#define rgblight_timer_enable() +#define rgblight_timer_disable() +#define rgblight_timer_toggle() +#endif ``` The following changes were made to tmk_core/common/avr/suspend.c, tmk_core/common/chibios/suspend.c, tmk_core/protocol/chibios/main.c, tmk_core/protocol/lufa/lufa.c, tmk_core/protocol/vusb/main.c. ```diff -# ifdef RGBLIGHT_ANIMATIONS rgblight_timer_enable(); -# endif ``` ```diff -#if defined(RGBLIGHT_ANIMATIONS) && defined(RGBLIGHT_ENABLE) +#if defined(RGBLIGHT_ENABLE) rgblight_task(); #endif ``` * remove 'defined(RGBLIGHT_ANIMATIONS)' in tmk_core/common/keyboard.c Co-authored-by: Joel Challis <git@zvecr.com>
2019-10-17Move tmk_core/common/backlight to quantum/backlight (#6710)Joel Challis
* Move tmk_core/common/backlight to quantum/backlight * Add guards to backlight inclusion * Add guards to backlight inclusion * Update backlight guards on clueboard/60 * Use full paths to avoid vpath issues
2019-09-07Banish some more magic numbers (#6662)fauxpark
2019-08-30clang-format changesskullY
2019-08-30Have clang ignore the code in bootloader_size.cskullY
2019-07-15Usbasploader bootloader option addition (#6304)yiancar
* Added USBasp bootloader option for USBasploader * author comment * ifdef fix :) * Add usbasp target * Update docs/flashing.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update docs/flashing.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update docs/flashing.md Co-Authored-By: fauxpark <fauxpark@gmail.com>
2019-04-19Make sure NOBITS is set on reset_keyDanny Nguyen
Patch from https://github.com/qmk/qmk_firmware/issues/3657#issuecomment-415147411 Long story short, in avr-gcc pre-8.2, reset_key was assigned to a memory area that was in a normal range, but when 8.2 came out, that memory got moved to an out of range area, causing errors like 0x800293 out of range. Apparently, this was fixed up in avr-gcc, but we haven't seen a release with the fix yet (we expected it in 8.3, but that didn't happen for some reason). What this commit does is move the reset_key back to the original memory location it was in before.
2019-03-12Next set of split_common changes (#4974)James Churchill
* Update split_common to use standard i2c drivers * Eliminate RGB_DIRTY/BACKLIT_DIRTY * Fix avr i2c_master error handling * Fix i2c_slave addressing * Remove unneeded timeout on i2c_stop() * Fix RGB I2C transfers * Remove incorrect comment
2019-02-14Add kb and user level keyboard initialization functions (#3113)Drashna Jaelre
* Add suspend functions * Disable RGB code if it's disabled * Add keyboard_init functions * Change where references so it will compile * Wrong command chained in wake up kb function * Fix non-feature file changes * Add documentation * Re-add matrix init docs * add rgblight code to example * Remove suspend code * Clean up docs * Fix docs * Fix suspend code * more doc fixes * change function to startup_* rather than keyboard_init_ * fix spelling error * fix up docs to finish removing keyboard_init * Use Pre and Post init functions * Update Documenation * Remove changes to my keymap and userspace code * Cleanup * Revert changes to extra files * Forgot a semicolon * Make sure all protocols call keyboard_setup * Cleanup functions * Unset startup_user * Remove changes from division keyboard * Readd startup_user function * Remove all to startup_user * Update docs/custom_quantum_functions.md Co-Authored-By: drashna <drashna@live.com> * Update docs/custom_quantum_functions.md Co-Authored-By: drashna <drashna@live.com> * Add suggestion line * Rebase fixes * Update documentation to be more useful/accurate * Cleanup of documentation * Fix spacing inconsistency * Revert unexpected change to keymap
2019-01-28Backlight - New option : BACKLIGHT_CAPS_LOCK (#4769)Rockman18
* [BACKLIGHT_CAPS_LOCK_INDICATOR] Use backlight toggling as Caps Lock LED I've implemented this feature because S65-X doesn't have LED indicators and the existing led_set_kb(usb_led) function try to use backlight as indicator but that creates an inconsistency with backlight_config state. - define `BACKLIGHT_CAPS_LOCK_INDICATOR` to enable Caps Lock indicator using backlight (for keyboards without dedicated LED) - Don't turn off LED indicators when suspend because backlight is already turned off. Else led_set(0) will turn back on backlight. - Documentation has been updated * [BACKLIGHT_CAPS_LOCK_INDICATOR] Turn off all LED indicators except Caps Lock if BACKLIGHT_CAPS_LOCK_INDICATOR * [BACKLIGHT_CAPS_LOCK] Rename BACKLIGHT_CAPS_LOCK_INDICATOR * [BACKLIGHT_CAPS_LOCK] Use new IS_LED_ON method
2019-01-25Fix RGBLIGHT_SLEEP function (#4865)Drashna Jaelre
* Only re-enable RGBLIGHT if it was on when going to sleep * Reformat file to follow QMK Standards * Fix check, since this is a loop, whoops Much thanks to @Rockman18 for catching this and posting the additional code!
2018-09-13Zeal60/Zeal65/M60-A implementation (#3879)Wilba6582
* Initial version of zeal60 * WIP * Fixes issue #900 * Adding RGB underglow functionality. Fixed a compile-time conflict caused by enabling RGB underglow functionality. * Refactor RPC protocol * Fix last merge * README for RGB underglow updated. * Additional README changes. * Adding RGBW strip software-based current-limiting functionality. * RGBW current-limiting functionality should be handled by RGBSTRIP_MAX_CURRENT_PER_LIGHT instead. * Updated README to reflect implementation of built-in current limiting. * Keymap readability improvements. * Minor keymap improvements. * Fixed LED driver init sequence, formatting * Dimming implementation tested, working. * Stab LEDs synced with spacebar hits in effects. * RGB underglow tested and functional. Simplified README for RGB underglow. * Undid accidental file deletion from previous merge conflict. Safer values for RGB underglow. * Improved arrow key positions in keymap. * Added functionality to correct uneven RGB underglow. Refactored related code. * Reverted to safer values for underglow. * Changes for v0.3 * Custom LED brightness scaling will take place after current adjustment in order to avoid being overridden. * Create keymap.c Added split backspace and split shift to ISO layout * Create config.h Turned on LEDs for new layout * Fixed bug where left spacebar stabilizer LED (LC06) would adopt color of row above. * Added hhkb_wilba keymap * Update keymap.c * Update keymap.c * Update keymap.c * Added indicators, full param setting via host * Added "mousekey" layout * Added Zeal65 support, factory test mode * Keycode safe range changed, caused bugs * Bumped EEPROM version due to change in QMK keycodes * Disable HHKB "blocked" LEDs if KC_NO in keymap * Added "disable_hhkb_blocker_leds" * Required overridden function for keymaps in EEPROM * Added polar coordinate mapping, effect speed * Force Raw HID interface number to 1 always * Fixed last merge from master * Added effect speed to default keymaps * add BACKLIGHT_ prefix to vars * add BACKLIGHT_ prefix to vars * Keymap speed effect; keymap improvements/fixes Readme updated to match changes * Refactored to use common IS31FL3731/I2C drivers * Fixed make rules, backlight disabled feature * Make split rightshift default for Zeal65 * Added M60-A as a "version" of Zeal60. * Renamed IS31FL3731 driver functions * Fix suspend_wakeup_init_kb() being defined twice * First pass refactor dynamic keymaps * Updated to changed I2C and ISSI drivers * Refactor zeal_color.* usage to quantum/color.* * Updated Zeal65, fixed dynamic_keymap * Major refactoring of Zeal60 backlight and API * Lots of little cleanups * Added readme.md * Added readme.md * Added LAYOUT_60*() macros, refactored and cleaned up default keymaps * Fix compile error in suspend.c * Added Zeal65 LAYOUT macros, info.json * Added rama/m60_a, deleted zeal60/keymaps/m60_a * Fixed rama/m60_a/keymaps/proto * Fixed compilation error for suspend.c * Requested changes for PR * Fixed readme.md images * Another readme.md fix * Added drashna's requested changes
2018-09-13rgblight.[ch] more configurable (#3582)Takeshi ISHII
* add temporary test code rgblight-macro-test1.[ch] * rgblight.h : mode auto numberring and auto generate mode name symbol No change in build result. * rgblight.c use RGBLIGHT_MODE_xxx symbols No change in build result. * quantum.c use RGBLIGHT_MODE_xxx symbols No change in build result. * fix build break. when RGB_MATRIX_ENABLE defined * add temporary test code rgblight-macro-test2.[ch] * modify rgblight_mode_eeprom_helper() and rgblight_sethsv_eeprom_helper() * modify rgblight_task() * configurable each effect compile on/off in config.h * update docs/feature_rgblight.md * fix conflict. docs/feature_rgblight.md * remove temporary test code rgblight-macro-test*.[ch] * fix comment typo. * remove old mode number from comment * update docs/feature_rgblight.md about effect mode * Revert "update docs/feature_rgblight.md about effect mode" This reverts commit 43890663fcc9dda1899df7a37d382fc38b1a6d6d. * some change docs/feature_rgblight.md * fix typo * docs/feature_rgblight.md update: revise mode number table
2018-09-11Fix RG Sleep issues for Teensy ControllersDrashna Jaelre
Appearenly, teensy controllers have some issues with waking up. If the rgblight is called "too soon", it will cause the controller to lock up, intermittently. Adding a 10 ms delay seems to fix this issue, as it lets it have enough time to handle things properly. This has been tested extensively on my Ergodox EZ, and can be seen in the @drashna userspace, under the "suspend_wakeup_init_user" function.
2018-06-28Make sure that both RGBLIGHT_ENABLE is defined, for RGBLIGHT_SLEEPDrashna Jaelre
2018-06-03Add Suspend functions (#3112)Drashna Jaelre
* Add suspend functions * Disable RGB code if it's disabled * Add suspend code to ChibiOS for future compatibility * Add keyboard_init functions * Change where references so it will compile * Wrong command chained in wake up kb function * Fix non-feature file changes * Add documentation * Re-add matrix init docs * add rgblight code to example * Remove keyboard init stuff for separate PR
2018-05-29Add and fix _noeeprom functions to many of the RGB Underglow functions (#3070)Drashna Jaelre
* And and fix _noeeprom functions to many of the RGB Underglow functions * Many functions are unnecessarily calling the eeprom write code. The toggle/enable is command is especially guilty of this, as it writes to EEPROM 3 times. But rgb mode writes twice, every time it's called. And init resets the rgb eeprom range and then writes back to it twice! * Fixed the rgblight_sethsv_noeeprom to work as expected, by moving a lot of the code to a helper function. * Added a noeeprom function for mode, enable, disable, and toggle functions. (didn't bother for increase/decrease stuff, and didn't add new keycodes) * Add to predefined colors list * Add new functions to manual/docs * Update RGB Sleep feature to use _noeeprom Because that's exactly what it should be doing, actually!
2018-05-20Fix compile issues for atmega328pDrashna Jaelre
2018-03-28Fix RGB Sleep codeU-LANDSRAAD\drashna
2018-03-22Generate API docs from source code comments (#2491)skullydazed
* Generate api docs from source code * Add a bunch of doxygen comments * more doxygen comments * Add the in-progress api docs * script to generate docs from travis * Add doc generation to the travis job * make travis_docs.sh commit the work it does * make sure the docs script exits cleanly
2018-03-19[Proposal?] Allow RGB Underglow to turn off when host is idle/asleep (#2104)Drashna Jaelre
* Add RGB Underglow Sleeping * Add RGBLIGHT_SLEEP to toggle/control RGB light behavior * Update rgb docs * Update for RGB disable command
2017-11-27Updates bootloader settings, adds file size check (#2029)Jack Humbert
* pull fuse settings for bootloader jump * fix 32a chips * make automatic bootloader selection optional * quantify bootloaders * fixs #164, speeds up dfu reset * fix for chips w/o usb * missing an n * fix bootloader sizes, use words for addresses * fix bmini, pearl, and [[ issue, make things quiet * ignore avr errors on arm for now * update settings for the light * document bootloader stuff * add bootloader title
2017-04-13Include host.h from suspend.cFred Sundvik
2017-01-21Simplified and polished a bit the code changes on tmk_coreLuiz Ribeiro
2017-01-21Got ps2avrGB to work with the V-USB protocolLuiz Ribeiro
2016-11-27Tidy up atomicity in timer.c and ring_buffer.hWez Furlong
Adopt the macros for saving/restoring the interrupt state that are provided by the avr gcc environment. Removing intialization of the timer value; this shaves off a few bytes because globals are default initialized to zero.
2016-11-23Fixed NO_SUSPEND_POWER_DOWN handlingWilba6582
2016-11-23Fixed NO_SUSPEND_POWER_DOWN handlingWilba6582
2016-09-28Fix #770, Fix #779IBNobody