summaryrefslogtreecommitdiff
path: root/quantum/quantum.h
AgeCommit message (Collapse)Author
2018-10-01Adds default value for TAPPING_TERM if Tap Dance is enabled (#2785)Drashna Jaelre
* Force require TAPPING_TERM if Tap Dance is enabled * Handle lack of TAPPING_TERM more gracefully
2018-09-28Update quantum matrix to support both AVR and Chibios ARM (#3968)yiancar
* Update quantum matrix to support both AVR and Chibios ARM - Addition of STM32 pin definitions - Created abstruction layer defines to control GPIO (This is a bit pointless for Chibios as we are creating a PAL ontop of a PAL but it is necessary for uniformity with AVR) - Modified matrix.c to use the above functions * minor ifdef fix * Rename of functions and docs - Added documentation. - Renamed functions according to Jack's spec. * Massdrop fix * Update matrix.c * Update quantum.h * Update quantum.h * Update quantum.h * Update internals_gpio_control.md
2018-09-17Make `PREVENT_STUCK_MODIFIERS` the default (#3107)Joe Wasson
* Remove chording as it is not documented, not used, and needs work. * Make Leader Key an optional feature. * Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE` * Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
2018-09-13rgblight.[ch] more configurable (#3582)Takeshi ISHII
* add temporary test code rgblight-macro-test1.[ch] * rgblight.h : mode auto numberring and auto generate mode name symbol No change in build result. * rgblight.c use RGBLIGHT_MODE_xxx symbols No change in build result. * quantum.c use RGBLIGHT_MODE_xxx symbols No change in build result. * fix build break. when RGB_MATRIX_ENABLE defined * add temporary test code rgblight-macro-test2.[ch] * modify rgblight_mode_eeprom_helper() and rgblight_sethsv_eeprom_helper() * modify rgblight_task() * configurable each effect compile on/off in config.h * update docs/feature_rgblight.md * fix conflict. docs/feature_rgblight.md * remove temporary test code rgblight-macro-test*.[ch] * fix comment typo. * remove old mode number from comment * update docs/feature_rgblight.md about effect mode * Revert "update docs/feature_rgblight.md about effect mode" This reverts commit 43890663fcc9dda1899df7a37d382fc38b1a6d6d. * some change docs/feature_rgblight.md * fix typo * docs/feature_rgblight.md update: revise mode number table
2018-08-28ISSI31FL3733 driver (#3679)yiancar
* ISSI31FL3733 driver - Addapted IS31 driver for the above driver * fix my branch * ISSI31FL3733 driver - Inclusion of above ISSI led driver * IS31fl3733 driver - Added correct function for control registers * Finalized support for ISSI31fl3733 led driver - Finalized and tested driver. - Modified i2c_master for arm due to declaration mistake. - Fixed spaces/tabs in quantum.h file. - Fixed spaces/tabs in common_features.mk file. - Removed unnecessary includes from rgb_matrix.c file. - Added local definitions for MIN and MAX macros in rgb_matrix.c file. - Adjusted chevron effect. - Added necessary define (RGB_3733_MATRIX_ENABLE) for makefile. - Added necessary C define (ISSI3733) to aid with inclusion of the correct header file. - Added documentation for the new driver. * Driver structure update - Changed rule includes to be more condensed (RGB_MATRIX_ENABLE = IS31FL3731) and (RGB_MATRIX_ENABLE = IS31FL3733) - Updated documentation - Reverted to the use of differently named functions for each driver and selecting the needed ones within rgb_matrix.c * ISSI Drivers refractoring - Moved issi drivers in a dedicated folder - Updated documentation * I2C library fix I released the special pins incorrectly before. It is now fixed.
2018-08-04Make sure Planck light calls user suspend functions (#3568)Drashna Jaelre
* Make sure Planck light calls user suspend functions * Add suspend.h include to quantum.h for kb/user function compatibility
2018-07-25Keymap: Bocaj Ergodox Updates (#3364)Jacob Jerrell
* Bocaj Layout Revamp * Pull in Upstream (#1) * Various tweaks for some Input:Club build processes * change KEYMAP to LAYOUT for all new keyboards made using this script * Add support for rev3 of the Atom47 (#2672) * Added support for rev3 of the Atom47 * Updated Atom47 readme's * Fix redefine error on rev2 and add maartenwut's keymap * Fix redefine error on LEdiodes keymap * Add Nyquist keymap (#2692) * nyquist * danielhklein nyquist setup * shift left controls * remove readme * cleanup before pr * ready for pr * Adds Phantom TKL support (#2696) * Add an info.json to phantom keyboard * Add layouts - KEYMAP_WINKEYLESS - KEYMAP_7BIT - KEYMAP_ISO - KEYMAP_ISO_WINKEYLESS * Add key_counts * Add 2 missing F-Row keys * Add TKC1800 info.json Created an info.json for the tkc1800. * Clueboard 60 info.json - adds - LAYOUT_60_ansi - LAYOUT_60_iso - KEYMAP_AEK - KEYMAP - LAYOUT_60_ansi_split_bs_rshift * Add the Speedo keyboard * Fix KC60 info.json file (#2707) * change KEYMAP to LAYOUT in all the KC60 files * Redo the info.json file * Small fixes to TKC1800 - adjust F-row to use 0.25 spacing - split left shift - add key_count * Fix some Configurator Warnings regarding LAYOUT vs KEYMAP (#2708) * change diverge 3 KC_KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for handwired arrow pad * change M10A to LAYOUT for m10-a * Change KC_KEYMAP to LAYOUT_kc and KEYMAP to LAYOUT for mf68 * change KC_KEYMAP to LAYOUT for nano * Refactor to LAYOUT * refactor to LAYOUT-ansi and LAYOUT_iso for s65 * LAYOUT conversions for lfkkeyboards * missed a few renames * mini1800 for lfkeyobards support of LAYOUT * Improve state/chord handling and clean up namespace Some values that can never, ever, change were held in local variables, rather than in PROGMEM. Fixed. Change "pressed" to a signed int so the test for < 0 makes sense, and to avoid possible weird failure modes in the case where a key release comes in when pressed is already zero. (Shouldn't happen, sure, but computers are weird.) A lot of things in process_steno had external linkage for no particular reason. They've been marked static. Stuff still builds. Distinguish between currently-held keys and keys that have been held, and expose these values through a nicely-named API so other code could, say, check on the current set of steno chording in order to make displays. Also in passing fix up the "state" value having external linkage so it could clash with other people's variable declarations. The API also provides hooks for key processing and steno chord events, so you can monitor those events without having to run in matrix_scan_user and recheck the values directly. Also document these. There is no path through processing a key that doesn't end with a return false, so the nested return foo() are gone and we just return false. * Pull information from config.h and rules.mk (#2711) * Pull information from config.h and rules.mk * Readd the kbd75 maintainer * Remove obsolete info.json entries (#2712) * Clean up some long-standing errors when populating the API (#2715) * More Configurator Warning Fixes (#2716) * mf68_ble did not have the correct .c and .h files * Fix JC65 KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for s60_x * Convert KEYMAP to LAYOUT for lets_split boards * Convert KEYMAP to LAYOUT * more fixes to keymap for iris * convert KEYMAP to LAYOUT for levinson keyboard * change losinggeneration's KEYMAP to LAYOUT * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for nyquist * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for viterbi * convert KEYMAP to LAYOUT * convert KEYMAP and its subsidiries to the LAYOUT standard * convert KEYMAP and its subsidiries to the new LAYOUT standard * Normacos keymap for let's split keyboard (#2691) * Cheers let's split keymap * fixed typo on norman layer of cheers keymap for let's split * fixed right handed mappings for home row * cheers keymap for let's split redefinition * updated Cheers keymap for let's split * cheers keymap for let's split updated with some terminal macros * renamed cheers let's split keymap to a more appropriate normacos * updated normacos keymap doc / removed non functional keys * reset let's split rules to default values * added more spotlight search macros * normalized keymap comments * Moved numpad on lower layer * hhkb jp personal keymap (#2698) * Add JJ40 Cockpit personal keymap (#2713) * Add JJ40 Cockpit keymap * Fix lower layer symbols * Add readme for "major" keyboards to eliminate more QMK Configurator errors (#2718) * add readme to ktype keyboard * add readme to m10a * add readme to mini1800 * add readme to parent directory * Revert "Pull in Upstream (#1)" This reverts commit eeba0cec17ccb636e4225eed88aeae72b99f5e45. * Updates to Bocaj Files - Gave up on Tap Dance for ' -> ' + Added another 'Secret' + Add ' -> ' to the Swap Hands key + Add Swap Hands to the ' -> ' key + Made Hand Swapping a momentary toggle - Removed Auto Shift + Added Layer Toggle to KC_QUOTE for the _TOOLS layer - Disabled Tap Dance * Merge remote-tracking branch 'upstream/master' * Updates to Bocaj Added Game Layers, Removed Unused Macros * Removed 'secrets.h' * Updates to Bocaj Remove 'secrets'. Remove 'sendstring_workman.h' and set related layer back to qwerty due to macro compatibility issues * Total revisioning of keymap and layout structure * Missed readme.md file * Bocaj - Permissive Hold setting enabled
2018-07-16Lets split eh (#3120)That-Canadian
* Line ending stuff again * Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C) * Added personal keymap, updated some of the EH files * Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional * Added split code from lets_split, removed pro micro imports and LED code THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT * Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now * Updated eh.c * More rework of the I2C code, added global flags for split boards. * Introduced RGB over I2C, having weird edge case issues at the moment though * Fixed weird I2C edgecase with RGB, although still would like to track down route cause.. * Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C * Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed. - Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix - Split keyboard files placed into quantum/split_common/ - Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand - Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed * Updated documentation for the new makefile options and #defines specific to split keyboards * Added a bit more info to docs, so people aren't confused * Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder * Removed some debugging from eh.c * Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap). * Added a README file to the Let's Split Eh? * Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c * Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions. * Fixed lets_split_eh not having a default version * Removed "eh" references from lets_split folder for now * Took lets_split folder from master to fix travis build errors, weird my local was overriding. * Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others * Removed rules.mk from my lets_split keymap, not needed * Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-15Integrating Peter Fleury's HD44780 LCD library (#3209)Max Audron
* integrated Peter Fleury's LCD library for HD44780 LCDs * fixed typo * cleanup finished * add documentation * added HD44780 documentation * removed keyboard from .gitmodules * resolved merge conflict * removed edit of kira75s rules.mk made by merge * moved hd44780 to drivers/avr * Added licence info to hd44780 files * Added link to hd44780 docs.
2018-05-08Adds IS31FL3731 RGB Matrix Implementation (#2910)Jack Humbert
* adds is31fl3731 rgb matrix implementation * fix build script for force pushes * allow bootloader size to be overwritten * adds planck light implementation * split led config into 2 arrays * idk * betterize register handling * update planck implementation * update planck * refine rgb interface * cleanup names, rgb matrix * start documentation * finish up docs * add effects list * clean-up merge * add RGB_MATRIX_SKIP_FRAMES * add support for at90usb1286 to bootloader options
2018-04-26Change handling of adjust layer to make it more LT(...) friendly. (#1625)Martin Sandiford
* Change handling of adjust layer to make it more LT(...) friendly. * Update based on feedback from drashna. * Change handling of adjust layer to make it more LT(...) friendly. This reworks handling to make it a little more friendly to include in keymaps.
2018-04-21Fix Audio Clicky sub-feature (#2784)Drashna Jaelre
* Fix Audio Clicky feature * Add to features
2018-03-16Add CMD and WIN aliases for KC_GUI, GUI(kc), GUI_T(kc), etc.fauxpark
2018-03-09Add SS_RALT for AltGR usage in macrosDrashna Jael're
2018-02-08Merge ChibiOS and LUFA descriptor support (#2362)fredizzimo
* Move lufa descriptor to protocol/usb_descriptor * Try to compile usb_descriptor on ChibiOS * Add lufa_utils for ChibiOS Lufa USB descriptors for ChibiOS * More lufa_util compatibility fixes * First compiling version of shared USB descriptor * Send the usb descriptors * Fix the CONSOLE output on ChibiOS * Add errors for unsupported interfaces * Enable support for vitual serial port USB descriptors * Implement virtual serial port for ChibiOS * Cleanup the lufa_utils Use the default lufa header files * Add raw hid support for ChibiOS This is completely untested * Enable midi compilation on ChibiOS * Move midi functionality out of lufa.c * Don't register sysex callback when not needed * ChibiOS compilation fixes * Update ChibiOS submodule * Fix the Midi USB descriptor It didn't work properly when both Midi and Virtual serial port was enabled. * Add MIDI support for ChibiOS * Fix USB descriptor strings on ChibiOS * Use serial usb driver for raw hid * Generalize the ChibiOS stream like drivers This makes the initialization much more simple and eliminates a lot of the code duplication. * Convert console output to chibios stream driver * Fixes for ChibiOS update * Update the ChibiOS contrib submodule To include the usb data toggle synchronization fixes * Fix duplicate reset enumeration on ChibiOS * Add missing include * Add number of endpoints check for ChibiOS * Enable serial USB driver on all keyboards * Add missing includes when API is enabled withot midi * Add another missing inlcude
2018-01-01backlight breathing overhaul (#2187)Balz Guenat
* add breathing to bananasplit * backlight breathing overhaul * fix the backlight_tick thing. * fix for vision_division backlight * fix a few keymaps and probably break breathing for some weirdly set-up boards. * remove BL_x keycodes because they made unreasonable assumptions * some fixes for BL keycodes * integer cie lightness scaling * use cie lightness for non-breathing backlight and make breathing able to reach true max brightness
2017-11-20added SS_LSFT to featured macrosGilbert Consellado
2017-09-18Added Auto Shift, tap key = normal, hold key = shifted state.Jeremy Cowgar
2017-09-12Updates send_string functionality, adds terminal feature (#1657)Jack Humbert
* implement basic terminal stuff * modify send_string to read normal strings too * add files bc yeah. working pgm detected * pgm detection apparently not working * adds send string keycodes, additional keycode support in send string * implement arguments * [terminal] add help command * [terminal] adds keycode and keymap functions * [terminal] adds nop.h, documentation * update macro docs
2017-08-08Initial implementation of the key_lock feature.Fredric Silberberg
2017-07-27Add TX Bolt protocol support for StenographyJoe Wasson
Requires virtser; Allows QMK to speak the TX BOlt protocol used by stenography machines and software (such as Plover). The upside is that Plover can be configured to listen only to TX Bolt allow the keyboard to switch layers without need to enable/disable the Plover software, or to have a second non-Steno keyboard work concurrently.
2017-07-23clean-up planck and preonic keymaps, move audio stuff aroundJack Humbert
2017-07-05Pull out sendstring variations to their own files.Shayne Holmes
Instead of having all sendstring keycode mappings in the main quantum.c file, give each one its own file in keymap_extras that can be #included in a user's keymap. If one is included, it will define the appropriate lookup tables and overwrite the weak definitions in quantum.c. (Including more than one sendstring definition will fail at compile time.) Update @rai-suta's test keymap to match, as well as the documentation.
2017-07-05Allow broader send_string layout customizability via compile flagShayne Holmes
Refactor new-ish JIS_KEYCODE send_string implementation with existing send_string Reshuffle JIS in line with other alternative keycodes for sendstring, and make them all accessible via compile-time options Add a separate function to allow sending a string with a delay.
2017-03-28Clarify the quantum license (#1042)skullydazed
* Clarify the license for files we have signoff on * Update against the currently signed off files * Remove unused and not clearly licensed headers * Replace an #endif I accidentally removed while resolving merge conflicts
2017-03-28Merge pull request #1112 from newsboytko/newsboytko/midi-keycodesJack Humbert
Flesh out MIDI support
2017-02-25Factor basic note processing into respective processorsGabriel Young
2017-02-19mergingJack Humbert
2017-02-15split up unicode systems into different filesJack Humbert
2017-02-12adds soft pwm for non-timed portsJack Humbert
2017-02-07Merge pull request #1057 from priyadi/selectable_outputJack Humbert
Implement runtime selectable output (USB or BT)
2017-02-01Limit outputselect to AVR only for nowPriyadi Iman Nurcahyo
2016-12-10Implemented basic key combination featureOfer Plesser
2016-11-26separated into api files/folderJack Humbert
2016-11-23travis plsJack Humbert
2016-11-21cleaning up new codeJack Humbert
2016-10-16working with power limitJack Humbert
2016-08-18Add a register/unregister_code16 pair of functionsGergely Nagy
These functions register not only the 8bit keycode, but the modifiers too. It doesn't handle the full range of the upper 8bits, just the mods, but that's a good start. Changed the tap-dance pair functions to use these, so one can do: `ACTION_TAP_DANCE_DOUBLE (KC_COLN, KC_SCLN)` ...and that will do the right thing. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
2016-07-29Most ergodox keymaps compiles on InfinityFred Sundvik
There are linker errors due to missing led funcitonality though
2016-07-13extract reset keyboard into a functionPavlos Vinieratos
that makes it easy to call reset_keyboard() from a function in a keymap
2016-07-01Add ChibiOS support for QMK (#465)fredizzimo
* Modularity and gcc warnings fixes. * Add ChibiOS support (USB stack + support files). * Make usb_main more USB_DRIVER #define independent. * Move chibios to tool. * Implement jump-to-bootloader. * Small updates. * Fix bootloader-jump compiling. * Move AVR specific sleep_led.c into avr. * Add basic sleep_led for chibios. * Update chibios README. * NKRO fixes. * Rename some Makefile defines. * Move STM32 bootloader address config to separate .h file. * Add ARM Teensies bootloader code. * Fix chibios/usb_main GET_REPORT handing. * Add missing #include to keymap.c. * Make bootmagic.c code portable (_delay_ms -> wait_ms). * Move declaration of keymap_config. Should really not declare variables in .h files - since it's included in different .c files, a proper linker then complains that the same variable is declared more than once (once for each .c file that the offending .h is included in). * Add eeprom support for chibios/kinetis. * Rename chibios example keyboard. * Move chibios/cortex selection to local Makefiles. * Chibios: use WFI in idle. WIP suspend stuff. * ChibiOS/kinetis: sending remote wakeup. * ChibiOS/STM32: send remote wakeup. * Fix report size of boot protocol. * Fix drop key stroke Keyboard report should be checked if its transfer finishs successfully. Otherwise key stroke can be missing when other key event occurs before the last report transfer is done. Boot protocol 10ms interval probably causes this problem in case it receives key events in a row within the period. NKRO protocol suffers less or nothing due to its interval 1ms. * Chibios/usb_main: rename a variable for clarity. * Add correct chibios/bootloader_jump for infinity KB. * ChibiOS: make reset request more CMSISy. * Chibios: Add breathing sleep LED on Kinetis MCUs. * ChibiOS: Update infinity bootloader code to match updated ChibiOS. * ChibiOS: prettify/document sleep_led code. * Chibios: Remove the wait in the main loop. * Add maple mini code. * Do timeout when writing to CONSOLE EP queue. Fixes TMK bug #266. * Chibios: add 'core/protocol' to the makefiles' search path. * Chibios: Update to new USB API. * Chibios: add more guards for transmitting (fix a deadlock bug). * Add update for chibios in README * Chibios: Fix a HardFault bug (wait after start). * Chibios: cleanup usb_main code. * Chibios: Revert common.mk change (fix AVR linking problem). * core: Fix chibios user compile options Compile options can be defined in project Makefile such as UDEFS, UADEFS, UINCDIR, ULIBDIR and ULIBS. * Sysv format for ChibiOS arm-none-eabi-size Some new patches to ChibiOS puts heap as it's own section. So the berkeley format is now useless, as the heap will be included in the BSS report. The sysv format displays the bss size correctly. * Fix hard-coded path of CHIBIOS * Add support for new version of ChibiOS and Contrib The Kinetis support has moved to a separate Contrib repository in the newest version of Chibios. There has also been some structure changes. So this adds support for those, while maintaining back- wards compability. * Update ChibiOS instructions * Chibios: implement sleep LED for STM32. * Chibios: Update the main chibios README. * Chibios: fix STM32_BOOTLOADER_ADDRESS name. * Chibios: make the default bootloader_jump redefinable (weak). * Chibios: disable LTO (link-time optimisation). With LTO enabled, sometimes things fail for mysterious reasons (e.g. bootloader jump on WF with LEDs enabled), just because the linker optimisation is too aggressive. * Chibios: add default location for chibios-contrib. * ChibiOS: update mk to match chibios/master. * ChibiOS: update instructions.md. * Add chibi_onekey example. * Add comments to chibi_onekey Makefile. * Rename some Makefile defines. * Move STM32 bootloader address config to separate .h file. * Rename chibios example keyboard. * Move chibios/cortex selection to local Makefiles. * Add Teensy LC onekey example. * Chibios: use WFI in idle. WIP suspend stuff. * Update chibi/teensy instructions. * Update chibios/Teensy instructions. * Add infinity_chibios * Add keymap_hasu.c * Infinity_chibios: select correct bootloader_jump. * Infinity_chibios: improve comments. * Add generic STM32F103C8T6 example. * Add maple mini code. * STM32F103x fixes. * Add maple mini pinout pic. * Chibios: updates for 3.0.4 git. * Chibios: rename example stm32_onekey -> stm32_f072_onekey. * Chibios: add makefiles for Teensy 3.x examples. * Chibios: update Teensy 3.x instructions. * Chibios: Tsy LC is cortex-m0plus. * Chibios: add more guards for transmitting (fix a deadlock bug). * Change README for chibios * Chibios: update examples to current chibios git. Match the changes in mainline chibios: - update chconf.h - update supplied ld scripts structure - update Teensy instructions (switch to official chibios and introduce contrib) * Add ChibiOS and ChibiOS-Contrib submodules Also fix the makefile path for them. * Moves chibios keyboards to keyboards folder * First version of ChibiOS compilation Only the stm32_f072_onkey keyboard is ported at the moment. It compiles, but still doesn't link. * More chibios fixes It now compiles without warnings and links * Move the teensy_lc_onekey to the keyboards folder * Clean up the make file rule structure * Remove keymap_fn_to_action * Update more ChibiOS keyboards to QMK Most of them does not compile at the moment though. * Use older version of Chibios libraries The newest ones have problems with compilation * Remove USB_UNCONFIGURED event It isn't present in the older version of ChibiOS * Fix the infinity_chibios compilation * Fix potentially uninitialized variable * Add missing include * Fix the ChibiOS makefile * Fix some Chibios keyboard compilation * Revert the rules.mk file back to master version * Combine the chibios and AVR makefiles With just the required overrides in the respective platform specific one. * Slight makefile restrucuring Platform specific compiler options * Move avr specific targets out of the main rules * Fix ChibiOS objcopy The ChibiOS objcopy needs different parameters, so the parameters are moved to the corresponding platform rule file * Fix the objcopy for real this time The comands were moved around, so chibios used avr and the ohter way around. Also change the objsize output format * Fix the thumb flags * Fix the infinity hasu keymap * Per platform cpp flags * Add gcc-arm-none-eabi package to travis * Add arm-none-eabi-newlib to travis * Fix the name of the libnewlib-arm-none-eabi lib * Fix the ChibiOS paths So that they are properly relative, and builds don't generate extra folders * Fix the board path of stm32_f103_onekey * Only consider folders with Makefiles as subproject
2016-06-29gets rid of rand warning [skip ci]Jack Humbert
2016-06-29adds random base64 character generatorJack Humbert
2016-06-29Moves features to their own files (process_*), adds tap dance feature (#460)Jack Humbert
* non-working commit * working * subprojects implemented for planck * pass a subproject variable through to c * consolidates clueboard revisions * thanks for letting me know about conflicts.. * turn off audio for yang's * corrects starting paths for subprojects * messing around with travis * semicolon * travis script * travis script * script for travis * correct directory (probably), amend files to commit * remove origin before adding * git pull, correct syntax * git checkout * git pull origin branch * where are we? * where are we? * merging * force things to happen * adds commit message, adds add * rebase, no commit message * rebase branch * idk! * try just pull * fetch - merge * specify repo branch * checkout * goddammit * merge? idk * pls * after all * don't split up keyboards * syntax * adds quick for all-keyboards * trying out new script * script update * lowercase * all keyboards * stop replacing compiled.hex automatically * adds if statement * skip automated build branches * forces push to automated build branch * throw an add in there * upstream? * adds AUTOGEN * ignore all .hex files again * testing out new repo * global ident * generate script, keyboard_keymap.hex * skip generation for now, print pandoc info, submodule update * try trusty * and sudo * try generate * updates subprojects to keyboards * no idea * updates to keyboards * cleans up clueboard stuff * setup to use local readme * updates cluepad, planck experimental * remove extra led.c [ci skip] * audio and midi moved over to separate files * chording, leader, unicode separated * consolidate each [skip ci] * correct include * quantum: Add a tap dance feature (#451) * quantum: Add a tap dance feature With this feature one can specify keys that behave differently, based on the amount of times they have been tapped, and when interrupted, they get handled before the interrupter. To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets explore a certain setup! We want one key to send `Space` on single tap, but `Enter` on double-tap. With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and has the problem that when the sequence is interrupted, the interrupting key will be send first. Thus, `SPC a` will result in `a SPC` being sent, if they are typed within `TAPPING_TERM`. With the tap dance feature, that'll come out as `SPC a`, correctly. The implementation hooks into two parts of the system, to achieve this: into `process_record_quantum()`, and the matrix scan. We need the latter to be able to time out a tap sequence even when a key is not being pressed, so `SPC` alone will time out and register after `TAPPING_TERM` time. But lets start with how to use it, first! First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because the feature is disabled by default. This adds a little less than 1k to the firmware size. Next, you will want to define some tap-dance keys, which is easiest to do with the `TD()` macro, that - similar to `F()`, takes a number, which will later be used as an index into the `tap_dance_actions` array. This array specifies what actions shall be taken when a tap-dance key is in action. Currently, there are two possible options: * `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when tapped once, `kc2` otherwise. * `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the current state of the tap-dance action. The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise. And that's the bulk of it! Do note, however, that this implementation does have some consequences: keys do not register until either they reach the tapping ceiling, or they time out. This means that if you hold the key, nothing happens, no repeat, no nothing. It is possible to detect held state, and register an action then too, but that's not implemented yet. Keys also unregister immediately after being registered, so you can't even hold the second tap. This is intentional, to be consistent. And now, on to the explanation of how it works! The main entry point is `process_tap_dance()`, called from `process_record_quantum()`, which is run for every keypress, and our handler gets to run early. This function checks whether the key pressed is a tap-dance key. If it is not, and a tap-dance was in action, we handle that first, and enqueue the newly pressed key. If it is a tap-dance key, then we check if it is the same as the already active one (if there's one active, that is). If it is not, we fire off the old one first, then register the new one. If it was the same, we increment the counter and the timer. This means that you have `TAPPING_TERM` time to tap the key again, you do not have to input all the taps within that timeframe. This allows for longer tap counts, with minimal impact on responsiveness. Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of tap-dance keys. For the sake of flexibility, tap-dance actions can be either a pair of keycodes, or a user function. The latter allows one to handle higher tap counts, or do extra things, like blink the LEDs, fiddle with the backlighting, and so on. This is accomplished by using an union, and some clever macros. In the end, lets see a full example! ```c enum { CT_SE = 0, CT_CLN, CT_EGG }; /* Have the above three on the keymap, TD(CT_SE), etc... */ void dance_cln (qk_tap_dance_state_t *state) { if (state->count == 1) { register_code (KC_RSFT); register_code (KC_SCLN); unregister_code (KC_SCLN); unregister_code (KC_RSFT); } else { register_code (KC_SCLN); unregister_code (KC_SCLN); reset_tap_dance (state); } } void dance_egg (qk_tap_dance_state_t *state) { if (state->count >= 100) { SEND_STRING ("Safety dance!"); reset_tap_dance (state); } } const qk_tap_dance_action_t tap_dance_actions[] = { [CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT) ,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln) ,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg) }; ``` This addresses #426. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org> * hhkb: Fix the build with the new tap-dance feature Signed-off-by: Gergely Nagy <algernon@madhouse-project.org> * tap_dance: Move process_tap_dance further down Process the tap dance stuff after midi and audio, because those don't process keycodes, but row/col positions. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org> * tap_dance: Use conditionals instead of dummy functions To be consistent with how the rest of the quantum features are implemented, use ifdefs instead of dummy functions. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org> * Merge branch 'master' into quantum-keypress-process # Conflicts: # Makefile # keyboards/planck/rev3/config.h # keyboards/planck/rev4/config.h * update build script
2016-06-23Backlight abstraction and other changes (#439)Jack Humbert
* redoes matrix pins, abstracts backlight code for B5,6,7 * slimming down keyboard stuff, backlight breathing implemented * don't call backlight init when no pin * cleans up user/kb/quantum calls, keyboard files * fix pvc atomic * replaces CHANNEL with correct var in breathing * removes .hexs, updates readmes, updates template * cleans-up clueboards, readmes to lowercase * updates readme
2016-06-21increase leader seq size to 5Jack Humbert
2016-06-18Cleans up quantum/keymap situation, removes extra lufa folders (#416)Jack Humbert
* sorts out keycodes * move midi around * remove mbed * replaces keymap with qmk/keymap_common * fixes keymap.h * keymap, config, quantum rearrange * removes unneeded lufa stuff
2016-06-03Improve string sending (#376)Eric Tang
2016-06-01adds send_string functionality (string macros)Jack Humbert
2016-05-28process_record implementation (non-breaking for process_action ATM)Jack Humbert