summaryrefslogtreecommitdiff
path: root/layouts/community/ortho_5x12
AgeCommit message (Collapse)Author
2020-01-26Ensure setPinInput actually sets input high-Z (#6237)Mikkel Jeppesen
* Ensure setPinInput actually sets input high-z * Fixed _PIN_ADDRESS Macro arguments as recommended by vomindoraan * Fixed instances of setInput to use new behavour * Changed kmac matrix to use input with pullups * Update keyboards/gh60/revc/revc.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fixed input state for unselect_rows * fixed merge conflict * Updated all instances of older uses of setPinInput() * Fixed naming mistake Co-authored-by: fauxpark <fauxpark@gmail.com>
2020-01-06[Keymap] Cleanup of Drashna code (#7800)Drashna Jaelre
* ifdef rgb stuff like a madman for RGB Coexistance * Re-enable RGB Light on Planck * fix RGB Coexistance issue * Tweak feature settings for Ergodox EZ Glow * Their powers combine, and I am Captain RGB This one is for noroadsleft and yan. * Limit brightness when both RGB features are enabled * Change shutdown method * Add RGB Coexistience stuff to keymap * disable RGBLIGHT_SLEEP until a solution can be found * Disable Unicode on the kyria * Fix up Iris rev defines * Fix up community layouts to compile properly * Cleanup rgb stuff * Merge ergodox keymaps * Update CCCV macro to use tap_code16 * Enable Solenoid on C39 Because josh couldn't * Enable RGB Light, not Matrix on rev6 keymap * Only enable LTO on non-ARM boards * Clean up Bootmagic OLED display * Enable RGBLIGHT_SPLIT on kyria Not that it does anything * Add hotkey for discord
2019-11-20[Keymap] All about (ARM) RGB and OLEDs (drashna keymaps) (#7354)Drashna Jaelre
* Add Kyria Keymap * Enable all RGBLIGHT Animations for ARM and high capacity AVR * Reduce GNUC version for __has_include * Cleanup Ortho 4x12 Community layout * Update Collide 39 keymap * Cleanup Keymaps * Enable full 30 LEDs for Ergodox * Change EEPROM Load timing * Use RGB Matrix on Planck Rev6 * Use correct keymap swap * Enable everything for ARM * Only enable rgb sleep on avr until crash is fixed * Add additional Kyria keymap config * Overhaul Kyria OLED display * Improve kyria keymap based on usage * Minor tweaks to rules * Update OLED code to truncate properly * Fix RGB Light layer indication * Switch all of biton32 to get_highest_layer function * Fix OLED Keylogger display * Run qmk cformat over all of my user files * Slight tweak to kyria based on usage * Move around LALT_T config * Add comments about base wrappers to keymaps * Another cformat pass * Temp fix for VUSB boards and NKRO * Convert tabs to spaces in rules.mk files * Only enable RGBLight if it's enabled * Add Encoder Flip setting * Update OLED font file
2019-10-28[Keymap] Updating keymaps (#7170)Xyverz
* Added WOW layer * Initial commit for this branch. Still a work in progress. * Added Rorschach keyboard layout. * Simplified keymap Removed the media layer to help simplify things. Also corrected some keymap mistakes in the Qwerty and Colemak layers. * Added ErgoTravel keymap. * reverted to previous layout. * Added Sol keyboard layout. * Minor changes to keymap. * more changes * Added sol graphic by Kagerufu and Cardiactuna * Added colemak layer because I can. * more changes to sol layout * Streamlined Sol layout * minor tweaks to sol layout * further revisions to sol keymap. * Removing deprecated #include statements from my keymaps * Standardizing keymap `include` lines. * Minor change to keymap. Swapped ESC with GRV on all alpha layers. * Tweaks to Atreus62 Keymap Added a layer for FPS RPG Loot Shooters. * Fixed readme.md for Atreus keymap. Replaced "Keymap" with "Layer" in illustrations for continuity's sake * More readme.md clean-up More clarification in the Atreus readme file. * Next verse, same as the first. * Changes to Sol layout Bringing my Sol layout more in line with my other Orthos. * Fixed keymap GUI. Replaced left-hand "RGUI" with "LGUI" on all layers as it should be. * Added ALPS64 keymap * Formatting corrections * fixes to config.h and keymap.c * Fixed errors This commit fixes a pathing issue in keyboards/orthodox/keymaps/xyverz/config.h and removes an stupid comma at the end of each LAYOUT stanza in keyboards/rgbkb/sol/keymaps/xyverz/keymap.c left there by me. * Fixed orthodox keymap config.h file I hope this one fixes the problem. *sigh* * Making suggested changes for PR#6192 Thanks to noroadsleft, fauxpark, and drashna. Still have more work to do, but at least these suggestions have been applied. * Fixing build errors Travis has shown me the error of my ways... * More fixes and corrections Those pesky semicolons... * More Fixes. * Removing unneeded code snippet. * fixed omitted semicolons * Code updates to my keymaps Updating the code for my Iris, Atreus62, and Atreus keymaps. * Fixed Atreus62 Keymap I forgot to add in the aliases for LOWER, RAISE, and ADJUST. * Added userspace Also made changes to Atreus62 Keymap to turn the red LEDs off on the ProMicro * Fixing code that disables LEDs on ProMicros Also tidied up my ErgoTravel keymap. * Moving userspace to new branch Moving my userspace to a new branch for the sake of keeping things clean on the master branch. * Added F13-F15 to Atreus62 Layout. * Update readme.md. * Updated Phantom keymap to current keymap standards * Phantom keymap updates Further updates - tidying and removing cruft. Thank you zvecr on Discord for the help! * Standards Updates Bringing my Kinesis keymap up to current code standards * Adding a readme * Bring GH60 code to standard * Utilizing layouts for 60_ansi and tkl_ansi Moving my GH60 and Phantom keymaps into layouts/community/ * Alps64 layout removal Removing my Alps64 keymap now that I've setup my 60_ansi layout. * Moved Clueboard layout to community/66_ansi. * Additions to 66_ansi config.h * Bringing keymaps up to standard. * More updates to keymaps. * Syntax updates * Revert "Syntax updates" This reverts commit a892b2d9fcc0d4ba8fc22d676d5414120cc2c183. * Moved WIP keymaps Moved my WIP keymaps to my wip_keymaps branch to keep my master clean * Updates requested by noroadsleft * more changes per noroadsleft More fixes as requested by noroadsleft. Further tidy-up and standardization of my keymap code.
2019-10-16[Keymap] Drashna's Hardware Features Experimentations (#6920)Drashna Jaelre
* Change RGBLight pin for Planck Light Move it to A0, so that the SPI? pins are available for BT hackery * Add QMK DFU bootloader info * Add Solenoid * Disable annoying white LED on bottom * Enable Solenoid on Corne * Remove bounds for animations * Increase debounce for Ergodox EZ to reduce repeat key issues * Set swap hands key to be a hold-tap key This way, it's not ANNOYING and doesn't swap the hands inteniontally * Move MT Alt in Corne keymap * Re-Add fine tuned control of secrets * Squash mods to single row * Add LRA settings to haptic feedback settings for Rev6 * Fix issue with non-Planck EZ keymaps * Add 40 Percent Nano with Analog Joystick * Add Collide39 keymap * Fix OLED printing to be more flavorful * Fix up Iris GamePad and come cleanup * Expand OLED char map further * Add modded characters to keylogger * Here be dragons Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Fix up rules for community layouts * Some more OLED tweaks * Add mod mask check function * Change QMK DFU Audio pin to be correct * Use manual STM config instead of CTPC for Collide 39
2019-09-07[Keymap] Big Drashna code update (#6639)Drashna Jaelre
* Add a quefrency keymap * New Alt-ernate layouts * Enable Per Key Tapping Term to preserve sanity * Use underglow and mod lights for status on Corne * Update the drashna_ms keymap for quefrency * Disable Audio since there isn't enough space * Update KC_MAKE to ues :flash target * Cleanup ergodox layout * Enable i2c support for Iris * Add keymap support for CG_SWAP * Enable RGB Matrix Shutdown mode * enable heatmap * Update gitlab CI to install python3 * Remove game macros These are no longer needed, and haven't been used in ages * Cleanup planck layout * Add RGB Matrix fun and RGB cleanup * Add keycode and config for RGB Matrix idle animations * Clean up rgb idle animation code * Add rgb idle keycode to keymaps * Fix issues with rgb matrix idle animation * Fix some handling for idle animation * Reduce idle animation timeout to 15s to be more reasonable * fix up rgb stuff * Fix isses with rgb functions not being called for matrix * Use custom EEPROM Magic Number so testing is easier * Extend Default Layer macro to support a lot more layers * Fix bjohnson macropad * Adjust KC_MAKE to process mods for more consistent behavior * Fix up rgb stuff on corne * Corne OLED Overhaul * Fixes a number of issues with weirdness. * Fixes issues with keylogger (should be more reliable now) * Modulaize the OLED render sections * Rewrite layer display code * Update URL for Font Editor Due to odd issues, I ended up rewriting from scratch. And using PROGMEM versions, since I think I was getting memory overflows. * Update polling rate on all keebs * Fix planck ez layout config * Remove macros from Viterbi
2019-07-22[Keymap] Drashna's Feature madness (#6128)Drashna Jaelre
* Fix my Tap Dance issues after I broke them * Cleanup and organization of userspace documentation As well as some additional cleanup of functions due to review of documentation. * Enable Tapdance on Glow and remove more animations * Revert to Eager PR debouncing * Add better check for startup animation * Move where RGB Matrix defines are listed * Limit RGB Matrix max val * Update keyboard for Iris Rev 3 conflicts * Enable encoder support on planck ez * Remove is_master check from corne\'s OLED code * Overhaul OLED screens for my Corne * One last removal * Show RGB valu On both sides * Updates for OLED display info * Fix compile issues for rgb config * Disabled Space Cadet for all drashna keymaps * Fix OLED Screen configs * Minor OLED Tweaks * Revert some Iris changes * Fix song include * Handle MAKE macro for the Corne boards better * Add super hacky-hack for eeconfig initialization * Add audio support for Fractal since Elite Cs support it * Add defines for keycode steps * Add White layout * Update Corne RGB info * Add fun effects to layer indication for RGB Matrix enabled boards * Use proper define for product name detection * Update formatting * Use custom timeout mechanism for OLED timeout * Fix up OLED screen HSV code for new HSV structure * Better handle turning off RGB Matrix when sleeping * Disable MultiSplash Animation * Change Iris back to using serial * Why was RGB disabled?!?!?! * Limit val in rgb_matrix_layer_helper function * Remove EECONFIG setting for RGB matrix
2019-05-29Update 333fred keymaps and add new iris map. (#6010)Fred Silberberg
* Update 333fred keymaps and add new iris map. * Fix iris key
2019-05-07[Keymap] crkbd/keymaps/rs: add rs keymap to corne keyboard and adapt others ↵Olivier Poitrey
(#5181) Update all my keymaps to work with 40 keys. Refactor code using Userspace.
2019-05-06[Keymap] RGB Changes for Drashna Keyboards (#5803)Drashna Jaelre
* Disable a bunch of reactive modes * Enable rgb matrix for Corne Keyboard * Convert CRKBD to rgb matrix * Add Gergo keyboard layout * Make Diablo 3 tap dance better * Add basic support for Planck EZ * Fix RGB Matrix stuff * Fix keycodes for Planck EZ * Update CRKBD OLED stuff * Fix typo for sleep on ergodox glow * Improve my gergo layout * Scrolling OLED key logger! * Change gergo layout * Hnadle unicode keycodes if unicode is disabled * Disable COMMAND/CONSOLE for gergo * Fix right side control * Re-enable LTO for all platforms Since I got updated arm gcc binaries that no longer error out on lto * Update formatting to match newer community standards Poor 2 space * Re-alight startup animation to use new HUE range * Streamline gitlab ci scripts * Disabled Space Cadet * Add support for breathing table * Enable new LTO Option And clean up defines that will now be repeatitive * Remove vscode settings * Additional formatting cleanup of config.h files
2019-04-22[Keymap] Update to Drashna Keymaps (#5594)Drashna Jaelre
* Start to standardize macro timer * Update Fractal layout Specifically, limit the RGB Lighting, since it's too many for the power, and only have the KITT annimation on the front * Update Iris keymap to use I2C for transport * Remove TAP_CODE_DELAY from keyboard in favor of global setting * Remove Woodpad Since it\'s no longer in my possession * Only enable LTO on AVR boards * Run matrix_scans while doing startup light * Run matrix_scan to get split keyboard code synced properly * Fix rgb mode * Remove custom debouncing settings * Make RGB Light Startup Animation optional * Fix opt def * Remove extra tap code delay value * Fix references to keebio boards * Add support for LP Iris keyboard * Add backlight code * Make startup animation optional * Update gitlab ci script * Remove port declaration * Revert avrgcc changes to gitlab ci file * Don't re-set mods * Remove MACRO_TIMER define * Add custom name for crkbd * Add name for Prime M pad * Add names for ortho 4x12 boards * Add some additional handling for rgb init * Change thumb clusters on ergodox * Switch Orthodox to I2C * Fix Space in ergodox keymap * Use OSL for ergodox layout * Ugh, can't find a good layout * Fix typo * Fix up animation startup * Cries in AVR * Fix makefiles for ergodox ez boards * Add support for "secret songs" in my userspace * Reset debounce to 5ms for Ergodox EZ * Fix gitlab CI yaml file * More crying in AVR * Cannot use rgb light and rgb matrix at the same time due to the WS2812 rgb matrix PR until the "Coexistance" PR is merged * Update ODox for split common and i2c * Add split config * Impement Split code * Add support for xscorpion OLED code * Add OLED display config * Fix OLED screen font * Get OLED set up in vertical mode * Remove old OLED code * add per key support for crkbd * Fix split changes * RGB Tweeaks * More OLED tweaks * Fix rotation stuff * Fix more OLED stuff * Remove custom Debounce from Ergodox layout since it's no longer needed
2019-02-16Remove redundant KC_TRNS and KC_NO fillers in layouts (#5142)fauxpark
2019-02-12[Keyboard] Move Keebio boards to own folder (#5109)Danny
* Move boards into keebio folder * Rename keymap * Update BDN9 files * Update BFO-9000 files * Update Chocopad files * Update Dilly files * Update Fourier files, collapse rev1 into main * Update Iris files * Update Laplace files * Update Levinson files, fix buswerks keymap * Update Nyquist files * Fix keymap issues * Update Quefrency files * Update Rorschach files * Update TF68 files * Update Viterbi files * Update Viterbi files * Update Wavelet files * Reformat default layout * Fix up default folder for Iris * Remove already defined aliases
2019-01-30Generalized nyquist layout for 5x12 boards. Removed duplicate readme.md that ↵Fredric Silberberg
was cased the same and caused issues.
2019-01-25rs: code friendly keymap for preonic, iris and my preonic clone (#4303)Olivier Poitrey
I worked on those keymap to simplify the use of 60% keyboards for coders. Instead of trying to mimic planck, this keymap remove raise/lower layer complexity and keep some important sign keys for coder in the upper right side pretty much the same way as they are on a full keyboard. A karabiner configuration is also provided to mimic most of the keymap features on the macbook internal keyboard for when you are forced to use it.
2018-12-31Keymap: Update for Drashna code - Proton C Prep Edition (#4708)Drashna Jaelre
* Make CRKBD keylogger output actually show tap keys * check MT/LT for twinkling * Add ortho 5x12 support for fractal keyboard * Use newer interface for setting pins/ports * Remove custom unicode methods * Reomve unicode input info * Odd rules issue * Redefine REST note to be more pleasing * Properly disable PM LEDs with GPIO commands * Update gitlab CI yaml file * Remove extra mod tap check * Remove initial state on ergodox glow * Rev6 Cleanup * Fix KC_MAKE macro * Update GitLab CI yaml file * More GitLab CI changes * One final GitLab CI change * Remove unneeded unicode support * Optimize KC_MAKE
2018-09-11Keymap: Fixed my ortho_5x12 layout (#3881)Xyverz
* Fixed my ortho_5x12 layout I've fixed the config.h file for my 5x12 ortho layout so that I can now use it with my Nyquist. * Update config.h * Update config.h
2018-08-04Keyboard: LED fixes for Kinesis Stapelberg controller, and keymap changes ↵Xyverz
(#3564) * Rules for vitamins_included Added a section to disable RGB underglow for the Let's Split Vitamins Included board. * fixing ortho_4x12 configs * Using upstream/master version instead * Additions and Corrections Corrected the Kinesis/Stapelberg's .c file to allow LEDs to work Removed excess cruft from my Kinesis keymap to reflect this change Other minor tweaks and adjustments to my ortho_4x12 and 5x12 layouts * Updated readme
2018-07-04Updates to Xyverz keymaps (#3315)Xyverz
* Adding Rama M10-A Macropad * ch-ch-ch changes... * Major overhaul based on SMT's keymap. * more changes. * Moved the FKeys to the ADJUST layer. * More rearranging. * Alias in Atreus62 keymap to make it more legible Added config.h to fix tapping_term issue for Caps Lock key in OSX * Added OrthoDox layout. * More layout changes. * Fixing things with the keyboard. * Finishing touches. Set left-hand master in config.h Embedded the arrow keys in keymap.c * Revised keymap making this easier to use. * additions and changes. * changes to various keymaps. * Minor adjustments to OrthoDox layout. * Added Eco keymap. Updated Let's Split keymap. * Added gherkin * Removed my M10A keymap * Planck Keymap Updates Updated my Planck keymap and created a simple keymap for Seph's Preonic. * Added readme * readme fixes * Update readme.md more clarification * Keymap Tweaks Removed the Power button setting from the keymap. It was in a horrible location. I'll work on getting it setup somewhere else sometime later. * Added Readme I finally got around to adding a readme to this keymap. I've also added minor changes to the layout. * Fixed Keymap Error * Fixed Readme * adding iris and levinson keymaps * Tweaks to keymap * added youngJZ keymap * Changes to keymap Added a readme.md * Levinson changes Added the readme.md and rules.mk files. Configured RGB underglow and backlighting. * fixed readme * changes to keymaps * Updated keymap * Updated readme.md * Updated Readme (again) * Updated Readme Fixed formatting. Again. * Updated readme This is the last readme update for this keyboard update. I hope. * Added Contra keymap * Kinesis Keymap Update * Updated Keymaps I've updated my Kinesis (Stapelberg) layout and my Clueboard 66 layout. I've also updated my Kinesis Readme. * Clueboard Keymap update Added media keys to my Clueboard 66 Rev2 layout. * Added keymap Added Minidox keymap & rules. Added user function to Let's Split keymap that turns off the red LEDs on the Pro Micros. * New Zen keymap Added Zen keyboard to my list of keyboards, so had to generate a new keymap for it. Also adding some changes to my MiniDox keymap and config.h, as well as my Levinson's config.h. The config.h file changes enable ee_hands. * A few changes for useability I made a few changes to the Minidox keymap to see if I can't make it more useable. I'm also working on streamlining the Zen keyboard keymap to reduce layers. * Re-vamped Iris keymap. * changes * minor keymap change This was a minor keymap change to use mod_tap for the backspace key: ALT when held, BSPC when tapped. * Added Fourier keymap * Keymap Cleanup Moved KC_ESC to KC_CAPS, and changed KC_ESC to KC_GRV This is because of muscle memory, I kept hitting ESC when trying to hit TAB. * Keymap Adjustments Swapped Caps/Esc, put Caps in Raise/Lower layers, put Grv in normal Esc position. Adjusted the readme.md to reflect these changes. * minor tweaks Added code to disable red ProMicro LEDs after flashing. * Clean-up * Corrections to keymap. Fixed a foul-up in the Zen keymap where the lctrl was where the LOWER should have been. * Changes to make this fall in line with the new Layout features * Moving to LAYOUTs for 4x12 boards * fixed config.h file * standardization changes * Reverted Atreus62 keymap to LAYOUT format * Switch Preonic and Nyquist to ortho_5x12 * Corrections to config.h * config.h file tweaks * config.h file tweaks * Added missing integers. * Updated Seph's keymap to LAYOUT standard. * Keymap tweaks & changes * Bringing keymap up to LAYOUT standard * Trying to get LEDs working * Fixes for Stapelberg Updated my keymap to confirm to the new LAYOUT standard. Updated the stapelberg.h to reflect this LAYOUT standard. Updated the stapelberg.c files to hopefully get the LEDs working. * Getting closer to Kinesis LED functionality. * NKRO Fix Disabled NKRO for VUSB ortho_5x12 boards
2018-05-18Updating my maps in upstream master (#2987)Xyverz
* Adding Rama M10-A Macropad * ch-ch-ch changes... * Major overhaul based on SMT's keymap. * more changes. * Moved the FKeys to the ADJUST layer. * More rearranging. * Alias in Atreus62 keymap to make it more legible Added config.h to fix tapping_term issue for Caps Lock key in OSX * Added OrthoDox layout. * More layout changes. * Fixing things with the keyboard. * Finishing touches. Set left-hand master in config.h Embedded the arrow keys in keymap.c * Revised keymap making this easier to use. * additions and changes. * changes to various keymaps. * Minor adjustments to OrthoDox layout. * Added Eco keymap. Updated Let's Split keymap. * Added gherkin * Removed my M10A keymap * Planck Keymap Updates Updated my Planck keymap and created a simple keymap for Seph's Preonic. * Added readme * readme fixes * Update readme.md more clarification * Keymap Tweaks Removed the Power button setting from the keymap. It was in a horrible location. I'll work on getting it setup somewhere else sometime later. * Added Readme I finally got around to adding a readme to this keymap. I've also added minor changes to the layout. * Fixed Keymap Error * Fixed Readme * adding iris and levinson keymaps * Tweaks to keymap * added youngJZ keymap * Changes to keymap Added a readme.md * Levinson changes Added the readme.md and rules.mk files. Configured RGB underglow and backlighting. * fixed readme * changes to keymaps * Updated keymap * Updated readme.md * Updated Readme (again) * Updated Readme Fixed formatting. Again. * Updated readme This is the last readme update for this keyboard update. I hope. * Added Contra keymap * Kinesis Keymap Update * Updated Keymaps I've updated my Kinesis (Stapelberg) layout and my Clueboard 66 layout. I've also updated my Kinesis Readme. * Clueboard Keymap update Added media keys to my Clueboard 66 Rev2 layout. * Added keymap Added Minidox keymap & rules. Added user function to Let's Split keymap that turns off the red LEDs on the Pro Micros. * New Zen keymap Added Zen keyboard to my list of keyboards, so had to generate a new keymap for it. Also adding some changes to my MiniDox keymap and config.h, as well as my Levinson's config.h. The config.h file changes enable ee_hands. * A few changes for useability I made a few changes to the Minidox keymap to see if I can't make it more useable. I'm also working on streamlining the Zen keyboard keymap to reduce layers. * Re-vamped Iris keymap. * changes * minor keymap change This was a minor keymap change to use mod_tap for the backspace key: ALT when held, BSPC when tapped. * Added Fourier keymap * Keymap Cleanup Moved KC_ESC to KC_CAPS, and changed KC_ESC to KC_GRV This is because of muscle memory, I kept hitting ESC when trying to hit TAB. * Keymap Adjustments Swapped Caps/Esc, put Caps in Raise/Lower layers, put Grv in normal Esc position. Adjusted the readme.md to reflect these changes. * minor tweaks Added code to disable red ProMicro LEDs after flashing. * Clean-up * Corrections to keymap. Fixed a foul-up in the Zen keymap where the lctrl was where the LOWER should have been. * Changes to make this fall in line with the new Layout features * Moving to LAYOUTs for 4x12 boards * fixed config.h file * standardization changes * Reverted Atreus62 keymap to LAYOUT format * Switch Preonic and Nyquist to ortho_5x12 * Corrections to config.h * config.h file tweaks * config.h file tweaks
2017-08-23Creates a layouts/ folder for keymaps shared between keyboards (#1609)Jack Humbert
* include variables and .h files as pp directives * start layout compilation * split ergodoxes up * don't compile all layouts for everything * might seg fault * reset layouts variable * actually reset layouts * include rules.mk instead * remove includes from rules.mk * update variable setting * load visualizer from path * adds some more examples * adds more layouts * more boards added * more boards added * adds documentation for layouts * use lowercase names for LAYOUT_ * add layout.json files for each layout * add community folder, default keymaps for layouts * touch-up default layouts * touch-up layouts, some keyboard rules.mk * update documentation for layouts * fix up serial/i2c switches