summaryrefslogtreecommitdiff
path: root/keyboards
AgeCommit message (Collapse)Author
2018-12-20Keyboard: Pr/helixpico add layout kc (#4686)MakotoKurauchi
* add some comment about Helix customize and auto-setup RGBLIGHT_LIMIT_VAL * add define USB_MAX_POWER_CONSUMPTION * Helix keyboard OLED, RGBLIGHT enable/disable control integrate into rules.mk rules.mk: add 4 Variables for compile control. # Helix keyboard customize # you can edit follows 4 Variables # jp: 以下の4つの変数を必要に応じて編集します。 OLED_ENABLE = no # OLED_ENABLE LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) LED_ANIMATIONS = yes # LED animations config.h: auto set RGBLED_NUM by HELIX_ROWS and rules.mk's define * HELIX_ROWS define move from config.h to rules.mk * add readme.md * rename readme.md to readme_jp.md * add readme.md and modify readme_jp.md * change helix/ssd1306.c for select glcdfont.c position * add variable LOCAL_GLCDFONT into each keymaps rules.mk * Add iPhone/iPad LED support to Helix default keymap * renumber _ADJUST for shrink program size * Fix Helix i2c wrong bit rate * add helix serial debug code * serial debug macro move from config.h to serial.h * helix serial.c debugging... * refine debug macros * add some comments * add SELECT_SERIAL_SPEED * add comments * debugging sync_send/sync_recv * add very high speed * fix sync_send/sync_recv * fix com. start and switch send/recv * debug mode off * remove debug codes * temporary change, compiling C, C++ and ASM without -g * helix config.h refine * Revert "temporary change, compiling C, C++ and ASM without -g" This reverts commit e9730cbbfd94fbcf792d992e3a1a65ad279b24d6. * add change_reciver2sender()/change_sender2reciver() This is a change to improve readability. * txled, rxled off in matrix_init() * add serial_send_packet() / serial_recive_packet() This is a change to reduce object size. * add serial_low() at ISR() top * add __attribute__((always_inline)) to some functions * modify serial_send_packet()/serial_recive_packet() A little, object size reduction. A little, speedup. * add debug code to helix/serial.c * Adjust sampling timing of serial signal being received * add split_scomm.c/split_scomm.h and change serial.c/serial.h serial.c was divided into 2 layers, split_scom.c and serial.c. The upper layer split_scomm.c is called from matrix.c. The lower layer serial.c accesses the hardware. * add split_scomm.c/split_scomm.h into helix/rev1 * reduce object size helix/rev2/matrix.c * remove checksum check, add parity check * force occur parity error for test * parity test ok. remove test code * change some comment & add skip code when buffer_size == 0 * serial.c: multiple types of transaction support Add 4 bits transaction-type field at packet top. Select Transaction Descriptor Table entry by transaction-type. * helix serial master-slave transaction optimize Using multi-type transaction feature of serial.c, communication contents between master slaves were optimized. * add debug code for retry * add comment into each config.h * fix ISR status drop * add a debug macro 'debug_retry_chg()' * reduce led_test size * remove debug code from helix/serial.c and etc. * helix:five_rows change TAPPING_TERM value 140 * Improved compatibility with let's split of serial.c. Finish helix/serial.c improvement. - The difference with the original let's split's serial.c - It's high-speed about 4 times. - Stable bi-directional data transfer. (Helix need master to slave transfer) - serial.h was divided 2 files, serial_config.h and sereial.h - With multiple types of transaction support, communication contents can be optimized. (NEW flexible API) - USE OLD Simple APIs (compatible with let's split serial.c) - files : - serial_config.h -- hardware configuration (need include by config.h) - serial.c/serial.h -- serial communication - USE NEW flexible APIs. (Support multi-type transaction function.) serial.c was divided into 2 layers, split_scom.c and serial.c. The upper layer split_scomm.c is called from matrix.c. The lower layer serial.c accesses the hardware. - files - split_scomm.c -- communication buffer is defined in here. call by matrix.c. - split_scomm.h -- buffer size is defined in here. include by matrix.c, split_util.c - serial_config.h -- hardware configuration (need include by config.h) To use the NEW API, specify #define SERIAL_USE_MULTI_TRANSACTION - serial.c/serial.h -- serial communication lower layer - NEW APIs for serial.c / serial.h (The lower layer) // Soft Serial Transaction Descriptor typedef struct _SSTD_t { uint8_t *status; uint8_t initiator2target_buffer_size; uint8_t *initiator2target_buffer; uint8_t target2initiator_buffer_size; uint8_t *target2initiator_buffer; } SSTD_t; // initiator is transaction start side void soft_serial_initiator_init(SSTD_t *sstd_table); // target is interrupt accept side void soft_serial_target_init(SSTD_t *sstd_table); int soft_serial_transaction(int sstd_index); int soft_serial_get_and_clean_target_status(int sstd_index); - NEW APIs for split_scomm.c / split_scomm.h (The upper layer) move from old serial.c the following buffer and functions serial_slave_buffer[] serial_master_buffer[] void serial_master_init(void) void serial_slave_init(void) int serial_update_buffers(void) define SERIAL_xxxxx_BUFFER_LENGTH move from serial_config.h to split_scomm.h * fix comment typo * Fix the value of helix:five_rows variable HELIX_ROWS to 5. * led_test rules.mk some change * Separate common parts of helix/rev2/keymaps/*/rules.mk into helix/rev2/keymaps_common.mk * helix/rev2/keymaps/edvorakjp/rules.mk use helix/rev2/keymaps_common.mk * Separate common parts of helix/pico/keymaps/*/rules.mk into helix/pico/keymaps_common.mk * Helix each keymap's using rgblight mode symbol instead magic number No change in build result. * Helix pico keymaps: make rgblight modes selectable. No change in build result. * Helix rev2 keymaps: make rgblight modes selectable. No change in build result. * fixed Helix froggy/keymap.c: invalid rgblight mode value 0 to 1 (=RGBLIGHT_MODE_STATIC_LIGHT) * Deselect RGB_TEST and ALTERNATING in Helix rev2,pico keymaps config.h. * Merge branch 'master' of https://github.com/qmk/qmk_firmware * revert 955dcbc * delete keymaps_common.mk * add LAYOUT_kc() to keyboards/helix/pico/pico.h
2018-12-20GSKT-00 Configurator updatenoroadsleft
- add JSON data for LAYOUT_all layout - fix ISO Enter on LAYOUT_60_iso_tsangan layout
2018-12-20Add PROGMEM keyword to Clueboard keymapsKevin Hogeland
2018-12-19update the alairock keymap for dichotomy (#4687)Skyler Lewis
Just a couple placement updates to my layout on the dichotomy keyboard.
2018-12-19Keymap: Refactor Hacker Dvorak (#4688)Ismael Venegas Castelló
Programmer Dvorak based layout for the Ergodox EZ.
2018-12-19Overhaul Unicode Common functionality (#4325)Drashna Jaelre
* Standardize the Unicode EEPROM code * Remove unicode init from process_record_* functions * Add unicode init to where it belongs: matrix_init_quantum * Move Unicode proccessing to unicode common * Add audio feedback to input mode keys to drive konstantin up a wall * Tap_code cleanup * Update keycodes * Update unicode documentation * Update unicode keycodes for consistency/easier merge * Add Audio Feedback section * Remove Functions from feature page And link to the file instead. Link to specific lines later on. * Fix spacing Co-Authored-By: drashna <drashna@live.com> * Because I missed it! Co-Authored-By: drashna <drashna@live.com> * Fix spacing Co-Authored-By: drashna <drashna@live.com> * SPAAAAAAAAAACing Co-Authored-By: drashna <drashna@live.com> * Add BSD for future compatibility * Thought I fixed that! Co-Authored-By: drashna <drashna@live.com> * non-breaking Co-Authored-By: drashna <drashna@live.com> * Considered that Co-Authored-By: drashna <drashna@live.com> * Yuuup Co-Authored-By: drashna <drashna@live.com> * consistency Co-Authored-By: drashna <drashna@live.com> * white spaces .... copied from elsewhere Co-Authored-By: drashna <drashna@live.com> * white spaces Co-Authored-By: drashna <drashna@live.com> * white spaces Co-Authored-By: drashna <drashna@live.com> * Update keycode defines * Fix Linux Song * Update all of the songs * Cleanup * Move and update check to ensure only one unicode method is enabled * Update quantum/quantum_keycodes.h * Update documentation * Wordsmithing and cleanup * Format unicode_common (#13) * case alignment * process_record_unicode_common → process_unicode_common * Move song arrays into function where they're used, align preprocessor directives * Swap the order of UC_WIN and UC_BSD * Update Unicode docs * Reorder Unicode mode stuff to match the order of input mode constants * Fix capitalization in doc subtitle * Readd BSD and OSX_RALT songs * Reword BSD note in docs * Readd BSD keycode description * Reword explanation of input on different platforms * Steal vomindoraan's input mode documentation Co-Authored-By: vomindoraan (vomindoraan@gmail.com) * Willingly give Drashna the rest of my Unicode doc improvements * Wordsmithing Co-Authored-By: drashna <drashna@live.com> * remove merge artifacts * Unicode common cleanup (#17) * Standardize the Unicode EEPROM code * Remove unicode init from process_record_* functions * Add unicode init to where it belongs: matrix_init_quantum * Move Unicode proccessing to unicode common * Add audio feedback to input mode keys to drive konstantin up a wall * Tap_code cleanup * Update keycodes * Update unicode documentation * Update unicode keycodes for consistency/easier merge * Add Audio Feedback section * Remove Functions from feature page And link to the file instead. Link to specific lines later on. * Fix white spaces Co-Authored-By: drashna <drashna@live.com> * Fix spacing Co-Authored-By: drashna <drashna@live.com> * Because I missed it! Co-Authored-By: drashna <drashna@live.com> * Fix spacing Co-Authored-By: drashna <drashna@live.com> * SPAAAAAAAAAACing Co-Authored-By: drashna <drashna@live.com> * white spaces Co-Authored-By: drashna <drashna@live.com> * Add BSD for future compatibility * Thought I fixed that! Co-Authored-By: drashna <drashna@live.com> * non-breaking Co-Authored-By: drashna <drashna@live.com> * Considered that Co-Authored-By: drashna <drashna@live.com> * Yuuup Co-Authored-By: drashna <drashna@live.com> * consistency Co-Authored-By: drashna <drashna@live.com> * white spaces .... copied from elsewhere Co-Authored-By: drashna <drashna@live.com> * white spaces Co-Authored-By: drashna <drashna@live.com> * white spaces Co-Authored-By: drashna <drashna@live.com> * Update keycode defines * Fix Linux Song * Update all of the songs * Cleanup * Move and update check to ensure only one unicode method is enabled * Update quantum/quantum_keycodes.h * Update documentation * Wordsmithing and cleanup * Format unicode_common (#13) * case alignment * process_record_unicode_common → process_unicode_common * Move song arrays into function where they're used, align preprocessor directives * Swap the order of UC_WIN and UC_BSD * Update Unicode docs * Reorder Unicode mode stuff to match the order of input mode constants * Fix capitalization in doc subtitle * Readd BSD and OSX_RALT songs * Reword BSD note in docs * Readd BSD keycode description * Reword explanation of input on different platforms * Steal vomindoraan's input mode documentation Co-Authored-By: vomindoraan (vomindoraan@gmail.com) * Willingly give Drashna the rest of my Unicode doc improvements * Wordsmithing Co-Authored-By: drashna <drashna@live.com> * Rearrange process_unicode_common functions * Make Unicode input mode constants (UC_*) an enum * Simplify unicode_input_start/finish code * Make the key used for WinCompose configurable * Remove UC_OSX_RALT in favor of setting the key with UNICODE_OSX_KEY * Update Unicode input mode doc * Add descriptions and rearrange definitions in process_unicode_common.h * Add registry command to Unicode docs + misc updates * Reword an explanation in Unicode docs * Add TODO comment * Remove trailing whitespace * Improve Cycling documentation * Add Unicode Input method Cycling support (#19) * Standardize the Unicode EEPROM code * Remove unicode init from process_record_* functions * Add unicode init to where it belongs: matrix_init_quantum * Move Unicode proccessing to unicode common * Add audio feedback to input mode keys to drive konstantin up a wall * Tap_code cleanup * Update keycodes * Update unicode documentation * Update unicode keycodes for consistency/easier merge * Add Audio Feedback section * Remove Functions from feature page And link to the file instead. Link to specific lines later on. * Fix white spaces Co-Authored-By: drashna <drashna@live.com> * Fix spacing Co-Authored-By: drashna <drashna@live.com> * Because I missed it! Co-Authored-By: drashna <drashna@live.com> * Fix spacing Co-Authored-By: drashna <drashna@live.com> * SPAAAAAAAAAACing Co-Authored-By: drashna <drashna@live.com> * white spaces Co-Authored-By: drashna <drashna@live.com> * Add BSD for future compatibility * Thought I fixed that! Co-Authored-By: drashna <drashna@live.com> * non-breaking Co-Authored-By: drashna <drashna@live.com> * Considered that Co-Authored-By: drashna <drashna@live.com> * Yuuup Co-Authored-By: drashna <drashna@live.com> * consistency Co-Authored-By: drashna <drashna@live.com> * white spaces .... copied from elsewhere Co-Authored-By: drashna <drashna@live.com> * white spaces Co-Authored-By: drashna <drashna@live.com> * white spaces Co-Authored-By: drashna <drashna@live.com> * Update keycode defines * Fix Linux Song * Update all of the songs * Cleanup * Move and update check to ensure only one unicode method is enabled * Update quantum/quantum_keycodes.h * Update documentation * Wordsmithing and cleanup * Format unicode_common (#13) * case alignment * process_record_unicode_common → process_unicode_common * Move song arrays into function where they're used, align preprocessor directives * Swap the order of UC_WIN and UC_BSD * Update Unicode docs * Reorder Unicode mode stuff to match the order of input mode constants * Fix capitalization in doc subtitle * Readd BSD and OSX_RALT songs * Reword BSD note in docs * Readd BSD keycode description * Reword explanation of input on different platforms * Steal vomindoraan's input mode documentation Co-Authored-By: vomindoraan (vomindoraan@gmail.com) * Willingly give Drashna the rest of my Unicode doc improvements * Wordsmithing Co-Authored-By: drashna <drashna@live.com> * Rearrange process_unicode_common functions * Make Unicode input mode constants (UC_*) an enum * Simplify unicode_input_start/finish code * Make the key used for WinCompose configurable * Remove UC_OSX_RALT in favor of setting the key with UNICODE_OSX_KEY * Update Unicode input mode doc * Add descriptions and rearrange definitions in process_unicode_common.h * Add registry command to Unicode docs + misc updates * Reword an explanation in Unicode docs * Add TODO comment * Add cycle_unicode_input_mode and UNICODE_SELECTED_MODES macro * Add an option for making cycle changes persistent * Add debug prints to functions that change input_mode * Use cycle_unicode_input_mode in whitefox/konstantin * Add persist_unicode_input_mode function * Add offset to cycle to allow stepping in reverse * Add keycodes: UNICODE_MODE_FORWARD, UNICODE_MODE_REVERSE Aliases: UC_MOD, UC_RMOD (respectively) * REVERT ME: Undo changes to whitefox/konstantin to avoid conflicts * Fix wrong constant name * Revert "REVERT ME: Undo changes to whitefox/konstantin to avoid conflicts" This reverts commit 42676bf251fc8e3823f5e614dad6e510ba47a2f3. * Change dprintf text * Give selected modes priority over EEPROM when !UNICODE_CYCLE_PERSIST * Remove trailing whitespace * Cleanup of RALT code and unicode compilation stuff * Remove else for unicode handling
2018-12-19Fix fc980c.h update (#4682)Drashna Jaelre
2018-12-18Keyboard: Espectro refactor and Configurator support (#4666)noroadsleft
* Espectro: layout macro refactor - updated to #pragma once method - restructure LAYOUT_all data as block comment - Configurator was reading the LAYOUT_all macro even though it was commented out. - updated all keyswitch arguments to use K<ROW><COLUMN> notation - add LAYOUT_iso macro - add info.json file for Configurator support * Espectro: keymap refactor - deleted unused MODS_CTRL_MASK definitions - iso keymap refactored to use LAYOUT_iso macro - default and iso keymaps refactored for readability
2018-12-18FC980C: refactor and Configurator updatenoroadsleft
- fc980c.h - updated to #pragma once method - layout macro visual alignment - info.json - fixed JSON ordering (keys were being assigned out-of-order) - default keymap - visual alignment - deleted unused fn_actions block
2018-12-18Keymap: A Planck style keymap with iris flair (#4677)Yan-Fa Li
* A Planck style keymap with iris flair - Re-arrange layers to be more planck like. - move backspace to right thumb - replace backspace with minus, more useful for coding - replace center keys with brackets - MT(MOD_LCTRL and ESCAPE) - Use QMK-DFU for bootloader - add a soft reset to keymap * Feedback from reviewers - remove redundant define (noroadsleft) - remove unused layer switch case (drashna)
2018-12-18Keymap: @mattly's planck layout (#4678)Matthew Lyon
2018-12-18Keymap: Changed to use LAYOUT_kc() macro instead of LAYOUT() macro for easy ↵Takeshi ISHII
maintenance. (#4676)
2018-12-18Keyboard: Initial commit of WT8-A implementation (#4674)Wilba
2018-12-18Keyboard: Adding ortho60 to handwired (#4672)Andrew Kannan
* Adding ortho60 to handwired * update to use LAYOUT_ortho_5x12 * Address PR comments about layout macros * Add default layout to info.json for configurator * Hack to xyverz layout until RGB branch is merged * Fix undef RGBDIPIN in xyverz 12x5 layout * Revert change to xvyerz's layout * Fix typo * Fix order * Revert xyverz rules.mk
2018-12-16EKeyboard: ErgoInu Configurator fix (#4665)noroadsleft
* ErgoInu: Configurator update, part 1 Give each key its own line to make the file easier to debug. * ErgoInu: Configurator update, part 2 - converted all JSON variables to lowercase (this was the bugfix) - converted Tabs to Spaces * ErgoInu: Configurator update, part 3 - break key data into chunks * ErgoInu: Configurator update, part 4 Rebuilt the layout tree into a new file, taking the Y values from the original data. Copied relevant data from original file into the new file, and then overwrote the original file.
2018-12-15Cospad Configurator and readme update (#4663)noroadsleft
* Cospad: Configurator update - added LAYOUT_gamepad_6x4 data - renders as 4 rows by 6 columns visually - fixed LAYOUT_numpad_6x4 data - JSON objects were in the wrong order * Cospad: readme update - markdown formatting fixes - made Hardware Availability address a hyperlink - updated Docs links
2018-12-15Ergo42: Configurator patch (#4664)noroadsleft
Wasn't rendering in Configurator as intended. Updated JSON data to use alias name instead of macro name.
2018-12-15converter/xt_usb: Configurator support (#4657)noroadsleft
2018-12-15Configurator support for Sun Type 3 and Type 5 USB converters (#4656)noroadsleft
* Sun Type 3 USB converter: Configurator support * Sun Type 5 USB converter: Configurator support
2018-12-14converter/palm_usb/stowaway: Configurator support (#4655)noroadsleft
2018-12-14converter/ibm_5291: Configurator support and readme cleanup (#4654)noroadsleft
* converter/ibm_5291: Configurator support - added layout data to info.json file - corrected keyboard_folder value * converter/ibm_5291: readme cleanup - Fixed "image" url (target of link was a web page; changed markdown formatting to text link) - Sentence capitalization fixes - markdown formatting fixes for readability
2018-12-14Keyboard: Chimera Ortho refactor (#4652)noroadsleft
* Layout macro refactor - Renamed KC_KEYMAP to LAYOUT_kc - Renamed KEYMAP to LAYOUT - moved LAYOUT above LAYOUT_kc (Hoping this encourages users to use LAYOUT.) - updated layout macro name in info.json - white space changes for readability * Keymap refactor: default Default keymap now uses `#include QMK_KEYBOARD_H` and LAYOUT macro (from KC_KEYMAP/LAYOUT_kc). Keymap was also refactored to use process_record_user function instead of deprecated action_get_macro from TMK. Also moved LONGPRESS_DELAY and LAYER_TOGGLE_DELAY definitions to config.h. * Keymap refactor: dcompact - Changed chimera_ortho.h include for QMK_KEYBOARD_H - Updated layout name on keymap layers * Coding conventions fix in default keymap * Keymap refactor: gordon - Changed chimera_ortho.h include for QMK_KEYBOARD_H - Removed redundant includes of action_layer.h and process_tap_dance.h (superseded by QMK_KEYBOARD_H) - Removed redundant definitions for KC_NO and KC_TRNS - Updated layout name on keymap layers
2018-12-14Refactor quantum/split_common/i2c.c, quantum/split_common/serial.c (#4522)Takeshi ISHII
* add temporary compile test shell script * Extended support of SKIP_VERSION to make invariant compile results during testing. * build_keyboard.mk, tmk_core/rules.mk: add LIB_SRC, QUANTUM_LIB_SRC support Support compiled object enclosed in library. e.g. ``` LIB_SRC += xxxx.c xxxx.c --> xxxx.o ---> xxxx.a ``` * remove 'ifdef/ifndef USE_I2C' from quantum/split_common/{i2c|serial}.c * add SKIP_DEBUG_INFO into tmk_core/rules.mk When SKIP_DEBUG_INFO=yes is specified, do not use the -g option at compile time. * tmk_core/rules.mk: Library object need -fno-lto * add SKIP_DEBUG_INFO=yes * remove temporary compile test shell script * add '#define SOFT_SERIAL_PIN D0' to keyboards/lets_split/rev?/config.h * quantum/split_common/serial.c: Changed not to use USE_I2C.
2018-12-14Comet46: Configurator supportnoroadsleft
2018-12-14Fix keymap build to send over remote desktop correctly. (#4651)Fred Silberberg
2018-12-14Keyboard: Bpiphany Pegasus Hoof Refactor, Configurator support (#4649)noroadsleft
* Pegasus Hoof: layout macro refactor - Renamed KEYMAP to LAYOUT - Added LAYOUT_tkl_ansi macro - white space changes (changed tabs for 2 spaces) * Pegasus Hoof: keymap refactor - updated layout macro names - changed to #include QMK_KEYBOARD_H - removed redundant KC_TRNS definitions - white space changes (changed tabs to spaces) - removed deprecated build script instructions from rules.mk files - updated config.h to #pragma once * Pegasus Hoof: Configurator support * Pegasus Hoof: readme cleanup - Reformat header and description paragraph - Fix Hardware Availability link (was 404) - renamed filename to lowercase * Pegasus Hoof: add LAYOUTS = tkl_ansi to rules.mk * Pegasus Hoof: fix LAYOUT_tkl_jis macro
2018-12-14Keyboard: Refactor fourier to use split common code (#4582)zvecr
* Refactor fourier to use split common code * Refactor fourier to use split common code - fix handedness when not using EE_HANDS or MASTER_LEFT * add SOFT_SERIAL_PIN config
2018-12-14Keyboard: Lets split eh default keymap - Fixes for superseded default layer ↵zvecr
functionality (#4581) * Fixes for superseded default layer functionality * Fixes for superseded default layer functionality
2018-12-14Keyboard: Bpiphany Frosty Flake Refactor, Configurator support and readme ↵noroadsleft
cleanup (#4648) * Frosty Flake: layout macro refactor - frosty_flake.h updated to use #pragma once - KEYMAP renamed to LAYOUT - KEYMAP_TKL renamed to LAYOUT_tkl * Frosty Flake: keymap refactor - config.h files updated to #pragma once - deleted deprecated build script rules from rules.mk - keymap.c files: - #include QMK_KEYBOARD_H - updated layout macro name - white space changes for readability * Frosty Flake: Configurator support * Frosty Flake: readme cleanup - Fixed Hardware Availability link (old link was 404) - tiny grammar fix (colon missing on compile-and-flash instructions)
2018-12-14Document the correct path to the split keyboard EEPROM files (#4585)zvecr
* Document the correct path to the split keyboard EEPROM files * Document the correct path to the split keyboard EEPROM files
2018-12-14Keyboard: B.mini EX refactor and Configurator support (#4647)noroadsleft
* B.mini EX: refactor - add LAYOUT_ansi and LAYOUT_iso macros - add ansi and iso keymaps with readme files * B.mini EX: Configurator support
2018-12-14Make quantum/split_common/serial.[ch] configurable (#4419)Takeshi ISHII
* add temporary compile test shell script * add 'CONFIG_H += serial_backward_compatibility.h' into common_features.mk:SPLIT_KEYBOARD block * add quantum/split_common/serial_backward_compatibility.h SERIAL_PIN_PORT and other PIN define move to serial_backward_compatibility.h SERIAL_BACKLIT_START move to split_util.h * quantum/split_common/serial.c change to helix-serial.c style serial configuration * add temporary file quantum/split_common/split-keyboards-list.txt * add '#define SOFT_SERIAL_PIN D0' to keyboards/6lit/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/divergetm2/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/ergotravel/rev1/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/foobar/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/handwired/dactyl_manuform/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/handwired/qc60/config.h * add '//#define SOFT_SERIAL_PIN D0' to keyboards/handwired/xealous/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/iris/rev*/config.h * add '//#define SOFT_SERIAL_PIN D0' to keyboards/lets_split_eh/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/levinson/rev*/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/miniaxe/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/nyquist/rev?/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/quefrency/rev1/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/qwertyydox/config.h,keyboards/qwertyydox/rev1/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/redox/rev1/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/rorschach/rev1/config.h * remove '#define SOFT_SERIAL_PIN D0' from quantum/split_common/serial_backward_compatibility.h * remove temporary file quantum/split_common/split-keyboards-list.txt * remove temporary compile test shell script * Revert "remove temporary compile test shell script" This reverts commit 15b0021b4092127b8d8a21f572642ad3702b46d4. * update quantum/split_common/compile_split_test.sh for new keyboard test * add '#define SOFT_SERIAL_PIN D0' to keyboards/diverge3/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/40percentclub/25/config.h * remove temporary compile test shell script * update docs/config_options.md, quantum/template/avr/config.h * fix quantum/template/avr/config.h * fix typo docs/config_options.md
2018-12-14Add some optimization to the Tetris keyboard (#4645)Drashna Jaelre
2018-12-14handwired/CMD60 Refactor, Configurator support and readme update (#4632)noroadsleft
* handwired/CMD60: refactor - renamed layout macro KEYMAP to LAYOUT - removed K2C, K3B and K3C locations (indications are these locations were unused in hardware) - keymap - now uses #include QMK_KEYBOARD_H - converted keycodes to short format - deleted TMK fn_actions and action_get_macro blocks - white space changes (readability/alignment) * handwired/CMD60: Configurator support * handwired/CMD60: readme update - updated to conform to current QMK template - added image and build gallery links * handwired/cmd60: rename all files and folders to lowercase
2018-12-14Keymap: handwired/108key_trackpoint Configurator support and readme update ↵noroadsleft
(#4633) * handwired/108key_trackpoint: Configurator support * handwired/108key_trackpoint: readme update - fix typo in make command - rename file to lowercase
2018-12-14Keymap: Disable audio for planck/dshields/rev6 and enable retro tapping. (#4643)Daniel Shields
2018-12-14Merge pull request #4642 from noroadsleft/cf/at101_blackheartDrashna Jaelre
AT101 Blackheart Configurator support and readme update
2018-12-14Baguette: Configurator updatenoroadsleft
The layout was right, but offset on both axes.
2018-12-13AT101 Blackheart: readme updatenoroadsleft
- added image - updated Docs links
2018-12-13AT101 Blackheart: Configurator supportnoroadsleft
2018-12-13Keyboardio Model 01: Configurator supportnoroadsleft
2018-12-13Add big switch layoutFredric Silberberg
2018-12-13Dactyl_manuform map and updates to my ergodox layout for moving to aFredric Silberberg
different location.
2018-12-13Added Dynamic Keymaps to M10-BWilba6582
2018-12-12Keyboard: handwired/maartenwut readme cleanup and Configurator support (#4624)noroadsleft
* handwired/maartenwut: readme cleanup - Fixed typo (Maarten's last name was misspelled) - Updated Docs links * handwired/maartenwut: Configurator support
2018-12-12Keyboard: handwired/kbod Refactor, Configurator support and readme update ↵noroadsleft
(#4623) * handwired/kbod: refactor - layout macro KEYMAP renamed to LAYOUT * handwired/kbod: update config.h files to #pragma once * handwired/kbod: Configurator support * handwired/kbod: readme update - updated reademe to current template - added image
2018-12-12Keymap: update ishtobs hadron keymap (#4613)ishtob
* adding ishtob's keymap to hadron ver3 * update ishtob keymap * ishtob hadron keymap update 2 * Delete readme (Case Conflict).md * Delete readme (Case Conflict).md * add missing FN layer to ishtob hadron keymap * removed unused toggle keycode
2018-12-12Zlant: Configurator rendering bugfix (#4622)noroadsleft
Configurator's API uses the available alias name, instead of the direct matrix name.
2018-12-12Puck Refactor, Configurator support and readme cleanup (#4615)noroadsleft
* Puck: layout macro refactor Reformat layout macro to resemble physical keyboard layout. * Puck: Configurator support * Puck: readme cleanup Markdown formatting corrections.
2018-12-12S7 Elephant Configurator fixes (#4614)noroadsleft
* S7 Elephant: Configurator bugfix, part 1 Reformatted the JSON so each key is on its own line: This makes the keys easier to rearrange. * S7 Elephant: Configurator bugfix, part 2 Deleted the extra key from LAYOUT_iso_1u: JSON contents stated this layout used a split Backspace, but the matrix is configured and intended to have a 2u Backspace. Extended the Backspace to 2u width and deleted the extra key. (This fixes the error that broke LAYOUT_iso_1u's rendering in the Configurator.) * S7 Elephant: Configurator bugfix, part 3 Fix ISO layouts: Noticed JSON object for Enter on ISO layouts was immediately after Right Bracket. Inspection of s7_elephant.h revealed the expected and appropriate location to be after ISO Hash. Moved Enter key to the proper location on all ISO layouts.