summaryrefslogtreecommitdiff
path: root/keyboards/preonic
AgeCommit message (Collapse)Author
2021-03-13Document LED physical location index for Planck and Preonic (#12147)Albert Y
Co-authored-by: filterpaper <filterpaper@localhost>
2021-02-28Add RGB Matrix support for Preonic rev3 (#12008)Albert Y
* Add g_led_config for RGB Matrix support * Corrected indentation * Undo indentation on existing rev3.c code Co-authored-by: filterpaper <filterpaper@localhost>
2021-02-27remove keyboard_folder from info.jsonZach White
2021-02-15Audio system overhaul (#11820)Drashna Jaelre
* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms this commits bundles the changes from the arm-dac-work branch focused on audio/audio_arm.* into one commit (leaving out the test-keyboard) f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both -> only the changes on audio_arm_.*, the keyboard related parts are split off to a separate commit bfe468ef1 start morphing wavetable 474d100b5 refined a bit 208bee10f play_notes working 3e6478b0b start in-place documentation of dac settings 3e1826a33 fixed blip (rounding error), other waves, added key selection (left/right) 73853d651 5 voices at 44.1khz dfb401b95 limit voices to working number 9632b3379 configuration for the ez 6241f3f3b notes working in a new way * Redo Arm DAC implementation for additive, wavetable synthesis, sample playback changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms this commit splits off the plank example keymap from commit f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both * refactoring: rename audio_ to reflect their supported hardware-platform and audio-generation method: avr vs arm, and pwm vs dac * refactoring: deducplicate ISR code to update the pwm duty-cycle and period in the avr-pwm-implementation pulls three copies of the same code into one function which should improve readability and maintainability :-) * refactoring: move common code of arm and avr implementation into a separate/new file * refactoring: audio_avr_pwm, renaming defines to decouple them from actually used timers, registers and ISRs * refactoring: audio_avr_pwm - replacing function defines with plain register defines aligns better with other existing qmk code (and the new audio_arm_pwm) doing similar pwm thing * add audio-arm-pwm since not all STM32 have a DAC onboard (STM32F2xx and STM32F3xx), pwm-audio is an alternative (STM32F1xx) this code works on a "BluePill" clone, with an STM32F103C8B * clang-format changes on quantum/audio/* only * audio_arm_dac: stopping the notes caused screeching when using the DAC audio paths * audio_arm_pwm: use pushpull on the pin; so that a piezzo can be hooked up direclty without additional components (opendrain would require an external pullup) * refactoring: remove unused file from/for atmel-avr chips * refactoring: remove unused (avr) wavetable file * audio_arm_dac: adapt dac_end callback to changed chibios DAC api the previous chibios (17.6.0) passed along a pointer into the buffer plus a sample_count (which are/already where included in the DACDrivre object) - the current chibios (19.1.0) only passes the driver object. this patch ports more or less exactly what the previous chibios ISR code did: either have the user-callback work the first or second half of the buffer (dacsample_t pointer, with half the DAC_BUFFER_SIZE samples) by adjusting the pointer and sample count * audio-arm-dac: show a compile-warning on undefined audio-pins Co-Authored-By: Drashna Jaelre <drashna@live.com> * audio_arm_dac: switch from exemplary wavetable generation to sine only sine+triangle+squrare is exemplary, and not realy fit for "production" use 'stairs' are usefull for debugging (hardware, with an oscilloscope) * audio_arm_dac: enable output buffers in the STM32 to drive external loads without any additional ciruitry - external opamps and such * audio: prevent out-of-bounds array access * audio_arm_dac: add output-frequency correcting factor * audio_arm_pwm: get both the alternate-function and pm-callback variants back into working condition and do some code-cleanup, refine documentation, ... * audio_arm_pwm: increase pwm frequency for "higher fidelity" on the previous .frequency=100000 higher frequency musical notes came out wrong (frequency measured on a Tektronix TDS2014B) note | freq | arm-pwm C2 | 65.4 | 65.491 C5 | 523.25 | 523.93 C6 | 1046.5 | 1053.38 C7 | 2093 | 2129 C8 | 4186 | 4350.91 with .frequency = 500000 C8 | 4186 | 4204.6 * audio refactoring: remove unused variables * audio_arm_dac: calibrate note tempo: with a tempo of 60beats-per-second a whole-note should last for exactly one second * audio: allow feature selection in rules.mk so the user can switch the audio driver between DAC and PWM on STM32 boards which support both (STM32F2 and up) or select the "pin alternate" pwm mode, for example on STM32F103 * audio-refactoring: move codeblocks in audio.[ch] into more coherent groups and add some inline documentation * audio-refactoring: cleanup and streamline common code between audio_arm_[dac|pwm] untangeling the relation between audio.c and the two drivers and adding more documenting comments :-) * audio_avr_pwm: getting it back into working condition, and cleanup+refactor * audio-refactoring: documentation and typo fixes Co-Authored-By: Nick Brassel <nick@tzarc.org> * audio-refactoring: cleanup defines, inludes and remove debug-prints * audio_chibios_dac: define&use a minimal sampling rate, based on the available tone-range to ease up on the cpu-load, while still rendering the higher notes/tones sufficiently also reenable the lower tones, since with the new implementation there is no evidence of them still beeing 'bugged' * audio-refactoring: one common AUDIO_MAX_VOICES define for all audio-drivers * audio-chibios-pwm: pwm-pin-allternate: make the the timer, timer-channel and alternate function user-#definable * audio_chibios_dac: math.h has fmod for this * Redo Arm DAC implementation for additive, wavetable synthesis, sample playback update Jack Humberts dac-example keymaps for the slight changes in the audio-dac interface * audio-refactoring: use a common AUDIO_PIN configuration switch instead of defines have the user select a pin by configuration in rules.mk instead of a define in config.h has the advantage of beeing in a common form/pattern across all audio-driver implementations * audio-refactoring: switch backlight_avr.c to the new AUDIO_PIN defines * audio-common: have advance_note return a boolean if the note changed, to the next one in the melody beeing played * audio-chibios-pwm: fix issue with ~130ms silence between note/frequency changes while playing a SONG through trial,error and a scope/logic analyzer figured out Chibios-PWMDriver (at least in the current version) misbehaves if the initial period is set to zero (or one; two seems to work); when thats the case subsequent calls to 'pwmChhangePeriod' + pwmEnableChannel took ~135ms of silence, before the PWM continued with the new frequency... * audio-refactoring: get 'play_note' working again with a limited number of available voices (say AUDIO_VOICES_MAX=1) allow new frequencies to be played, by discarding the oldest one in the 'frequencies' queue * audio: set the fallback driver to DAC for chibios and PWM for all others (==avr at the moment) * audio-refactoring: moore documentation and some cleanup * audio-avr-pwm: no fallback on unset AUDIO_PIN this seems to be the expected behaviour by some keyboards (looking at ckeys/handwire_101:default) which otherwise fail to build because the firmware-image ends up beeing too large for the atmega... so we fail silently instead to keep travis happy * audio-refactoring: untangling terminology: voice->tone the code actually was working on tones (combination of pitch/frequency, duration, timbre, intensity/volume) and not voices (characteristic sound of an instrument; think piano vs guitar, which can be played together, each having its own "track" = voice on a music sheet) * audio-pwm: allow freq=0 aka a pause/rest in a SONG continue processing, but do not enable pwm units, since freq=0 wouldn't produce any sound anyway (and lead to division by zero on that occasion) * audio-refactoring: audio_advance_note -> audio_advance_state since it does not only affect 'one note', but the internally kept state as a whole * audio-refactoring: untangling terminology: polyphony the feature om the "inherited" avr code has little to do with polyphony (see wikipedia), but is more a time-multiplexing feature, to work around hardware limitations - like only having one pwm channel, that could on its own only reproduce one voice/instrument at a time * audio-chibios-dac: add zero-crossing feature have tones only change/stop when the waveform approaches zero - to avoid audible clicks note that this also requires the samples to start at zero, since the internally kept index into the samples is reset to zero too * audio-refactoring: feature: time-multiplexing of tones on a single output channel this feature was in the original avr-pwm implementation misnomed as "polyphony" with polyphony_rate and so on; did the same thing though: time-multiplexing multiple active notes so that a single output channel could reproduce more than one note at a time (which is not the same as a polyphony - see wikipedia :-) ) * audio-avr-pwm: get music-mode working (again) on AVRs with both pwm channels, or either one of the two :-) play_notes worked already - but music_mode uses play_note * audio-refactoring: split define MAX_SIMULTANEOUS_TONES -> TONE_STACKSIZE since the two cases are independant from one another, the hardware might impose limitations on the number of simultaneously reproducable tones, but the audio state should be able to track an unrelated number of notes recently started by play_note * audio-arm-dac: per define selectable sample-luts plus generation script in ./util * audio-refactoring: heh, avr has a MIN... * audio-refactoring: add basic dac audio-driver based on the current/master implementation whereas current=d96380e65496912e0f68e6531565f4b45efd1623 which is the state of things before this whole audio-refactoring branch boiled down to interface with the refactored audio system = removing all redundant state-managing and frequency calculation * audio-refactoring: rename audio-drivers to driver_$PLATFORM_$DRIVER * audio-arm-pwm: split the software/hardware implementations into separate files which saves us partially from a 'define hell', with the tradeoff that now two somewhat similar chibios_pwm implementations have to be maintained * audio-refactoring: update documentation * audio-arm-dac: apply AUDIO_PIN defines to driver_chibios_dac_basic * audio-arm-dac: dac_additive: stop the hardware when the last sample completed the audio system calls for a driver_stop, which is delayed until the current sample conversion finishes * audio-refactoring: make function-namespace consistent - all (public) audio functions start with audio_ - also refactoring play*_notes/tones to play*_melody, to visually distance it a bit from play*_tone/_note * audio-refactoring: consistent define namespace: DAC_ -> AUDIO_DAC_ * audio-arm-dac: update (inline) documentation regarding MAX for sample values * audio-chibios-dac: remove zero-crossing feature didn't quite work as intended anyway, and stopping the hardware on close-to-zero seems to be enought anyway * audio-arm-dac: dac_basic: respect the configured sample-rate * audio-arm-pwm: have 'note_timbre' influence the pwm-duty cycle like it already does in the avr implementation * audio-refactoring: get VIBRATO working (again) with all drivers (verified with chibios_[dac|pwm]) * audio-arm-dac: zero-crossing feature (Mk II) wait for the generated waveform to approach 'zero' before either turning off the output+timer or switching to the current set of active_tones * audio-refactoring: re-add note-resting -> introduce short_rest inbetween - introduce a short pause/rest between two notes of the same frequency, to separate them audibly - also updating the refactoring comments * audio-refactoring: cleanup refactoring remnants remove the former avr-isr code block - since all its features are now refactored into the different parts of the current system also updates the TODOS * audio-refactoring: reserve negative numbers as unitialized frequencies to allow the valid tone/frequency f=0Hz == rest/pause * audio-refactoring: FIX: first note of melody was missing the first note was missing because 'goto_next_note'=false overrode a state_change=true of the initial play_tone and some code-indentations/cleanup of related parts * audio-arm-dac: fix hardware init-click due to wron .init= value * audio-refactoring: new conveniance function: audio_play_click which can be used to further refactor/remove fauxclicky (avr only) and/or the 'clicky' features * audio-refactoring: clang-format on quantum/audio/* * audio-avr-pwm: consecutive notes of the same frequency get a pause inserted inbetween by audio.c * audio-refactoring: use milliseconds instead of seconds for 'click' parameters clicks are supposed to be short, seconds make little sense * audio-refactoring: use timer ticks instead of counters local counters were used in the original (avr)ISR to advance an index into the lookup tables (for vibrato), and something similar was used for the tone-multiplexing feature decoupling these from the (possibly irregular) calls to advance_state made sesne, since those counters/lookups need to be in relation to a wall-time anyway * audio-refactoring: voices.c: drop 'envelope_index' counter in favour of timer ticks * audio-refactoring: move vibrato and timbre related parts from audio.c to voices.c also drops the now (globally) unused AUDIO_VIBRATO/AUDIO_ENABLE_VIBRATO defines * audio.c: use system-ticks instead of counters the drivers have to take care of for the internal state posision since there already is a system-tick with ms resolution, keeping count separatly with each driver implementation makes little sense; especially since they had to take special care to call audio_advance_state with the correct step/end parameters for the audio state to advance regularly and with the correct pace * audio.c: stop notes after new ones have been started avoids brief states of with no notes playing that would otherwise stop the hardware and might lead to clicks * audio.c: bugfix: actually play a pause instead of just idling/stopping which lead the pwm drivers to stop entirely... * audio-arm-pwm: pwm-software: add inverted output new define AUDIO_PIN_ALT_AS_NEGATIVE will generate an inverted signal on the alternate pin, which boosts the volume if a piezo is connected to both AUDIO_PIN and AUDIO_PIN_ALT * audio-arm-dac: basic: handle piezo configured&wired to both audio pins * audio-refactoring: docs: update for AUDIO_PIN_ALT_AS_NEGATIVE and piezo wiring * audio.c: bugfix: use timer_elapsed32 instad of keeping timestamps avoids running into issues when the uint32 of the timer overflows * audio-refactoring: add 'pragma once' and remove deprecated NOTE_REST * audio_arm_dac: basic: add missing bracket * audio.c: fix delta calculation was in the wrong place, needs to use the 'last_timestamp' before it was reset * audio-refactoring: buildfix: wrong legacy macro for set_timbre * audio.c: 16bit timerstamps suffice * audio-refactoring: separate includes for AVR and chibios * audio-refactoring: timbre: use uint8 instead of float * audio-refactoring: duration: use uint16 for internal per-tone/note state * audio-refactoring: tonemultiplexing: use uint16 instead of float * audio-arm-dac: additive: set second pin output-low used when a piezo is connected to AUDIO_PIN and AUDIO_PIN_ALT, with PIN_ALT_AS_NEGATIVE * audio-refactoring: move AUDIO_PIN selection from rules.mk to config.h to be consistent with how other features are handled in QMK * audio-refactoring: buildfix: wrong legacy macro for set_tempo * audio-arm-dac: additive: set second pin output-low -- FIXUP * audio.c: do duration<>ms conversion in uint instead of float on AVR, to save a couple of bytes in the firmware size * audio-refactoring: cleanup eeprom defines/usage for ARM, avr is handled automagically through the avr libc and common_features.mk Co-Authored-By: Drashna Jaelre <drashna@live.com> * audio.h: throw an error if OFF is larger than MAX * audio-arm-dac: basic: actually stop the dac-conversion on a audio_driver_stop to put the output pin in a known state == AUDIO_DAC_OFF_VALUE, instead of just leaving them where the last conversion was... with AUDIO_PIN_ALT_AS_NEGATIVE this meant one output was left HIGH while the other was left LOW one CAVEAT: due to this change the opposing squarewave when using both A4 and A5 with AUDIO_PIN_ALT_AS_NEGATIVE show extra pulses at the beginning/end on one of the outputs, the two waveforms are in sync otherwise. the extra pusles probably matter little, since this is no high-fidelity sound generation :P * audio-arm-dac: additive: move zero-crossing code out of dac_value_generate which is/should be user-overridable == simple, and doing one thing: providing sample values state-transitions necessary for the zero crossing are better handled in the surrounding loop in the dac_end callback * audio-arm-dac: dac-additive: zero-crossing: ramping up or down after a start trigger ramp up: generate values until zero=OFF_VALUE is reached, then continue normally same in reverse for strop trigger: output values until zero is reached/crossed, then keep OFF_VALUE on the output * audio-arm-dac: dac-additive: BUGFIX: return OFF_VALUE when a pause is playing fixes a bug during SONG playback, which suddenly stopped when it encoutnered a pause * audio-arm-dac: set a sensible default for AUDIO_DAC_VALUE_OFF 1/2 MAX was probably exemplary, can't think of a setup where that would make sense :-P * audio-arm-dac: update synth_sample/_wavetable for new pin-defines * audio-arm-dac: default for AUDIO_DAC_VALUE_OFF turned out that zero or max are bad default choices: when multiple tones are played (>>5) and released at the same time (!), due to the complex waveform never reaching 'zero' the output can take quite a while to reach zero, and hence the zero-crossing code only "releases" the output waaay to late * audio-arm-dac: additive: use DAC for negative pin instead of PAL, which only allows the pin to be configured as output; LOW or HIGH * audio-arm-dac: more compile-time configuration checks * audio-refactoring: typo fixed * audio-refactoring: clang-format on quantum/audio/* * audio-avr-pwm: add defines for B-pin as primary/only speaker also updates documentation. * audio-refactoring: update documentation with proton-c config.h example * audio-refactoring: move glissando (TODO) to voices.c refactored/saved from the original glissando implementation in then upstream-master:audio_avr.c still needs some work though, as it is now the calculation *should* work, but the start-frequency needs to be tracked somewhere/somehow; not only during a SONG playback but also with user input? * audio-refactoring: cleanup: one round of aspell -c * audio-avr-pwm: back to AUDIO_PIN since config_common.h expands them to plain integers, the AUDIO_PIN define can directly be compared to e.g. B5 so there is no need to deal with separate defines like AUDIO_PIN_B5 * audio-refactoring: add technical documentation audio_driver.md which moves some in-code documentation there * audio-arm-dac: move AUDIO_PIN checks into c-code instead of doing everything with the preprocessor, since A4/A5 do not expand to simple integers, preprocessor int-comparison is not possible. but necessary to get a consistent configuration scheme going throughout the audio-code... solution: let c-code handle the different AUDIO_PIN configurations instead (and leave code/size optimizations to the compiler) * audio-arm-dac: compile-fix: set AUDIO_PIN if unset workaround to get the build going again, and be backwarts compatible to arm-keyboards which not yet set the AUDIO_PIN define. until the define is enforced through an '#error" * audio-refactoring: document tone-multiplexing feature * audio-refactoring: Apply suggestions from documentation review Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * audio-refactoring: Update docs/audio_driver.md * audio-refactoring: docs: fix markdown newlines Terminating a line in Markdown with <space>-<space>-<linebreak> creates an HTML single-line break (<br>). Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * audio-arm-dac: additive: fix AUDIO_PIN_ALT handling * audio-arm-pwm: align define naming with other drivers Co-authored-by: Joel Challis <git@zvecr.com> * audio-refactoring: set detault tempo to 120 and add documentation for the override * audio-refactoring: update backlight define checks to new AUDIO_PIN names * audio-refactoring: reworking PWM related defines to be more consistent with other QMK code Co-authored-by: Joel Challis <git@zvecr.com> * audio-arm: have the state-update-timer user configurable defaulting to GPTD6 or GPTD8 for stm32f2+ (=proton-c) stm32f1 might need to set this to GPTD4, since 6 and 8 are not available * audio-refactoring: PLAY_NOTE_ARRAY was already removed in master * Add prototype for startup * Update chibiOS dac basic to disable pins on stop * Add defaults for Proton C * avoid hanging audio if note is completely missed * Don't redefine pins if they're already defined * Define A4 and A5 for CTPC support * Add license headers to keymap files * Remove figlet? comments * Add DAC config to audio driver docs * Apply suggestions from code review Co-authored-by: Jack Humbert <jack.humb@gmail.com> * Add license header to py files * correct license header * Add JohSchneider's name to modified files AKA credit where credit's due * Set executable permission and change interpeter * Add 'wave' to pip requirements * Improve documentation * Add some settings I missed * Strip AUDIO_DRIVER to parse the name correctly * fix depreciated * Update util/audio_generate_dac_lut.py Co-authored-by: Jack Humbert <jack.humb@gmail.com> * Fix type in clueboard config * Apply suggestions from tzarc Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Johannes <you@example.com> Co-authored-by: JohSchneider <JohSchneider@googlemail.com> Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joshua Diamond <josh@windowoffire.com> Co-authored-by: Jack Humbert <jack.humb@gmail.com>
2021-02-06Remove `MIDI_ENABLE_STRICT` from user keymaps (#11750)Ryan
2021-01-27Merge remote-tracking branch 'upstream/master' into developfauxpark
2021-01-27Remove `MIDI_ENABLE_STRICT` from keyboards' config.h (#11679)Ryan
2021-01-24Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-01-24Fix preonic layout documentation (#11655)Damien
* [Apple M5120] First iteration * Cleaned apple_m5120 files * Changes requested by PR * Update keyboards/apple_m5120/iso/rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/apple_m5120/iso/keymaps/default/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Updated Preonic default layout doc * Removed non related files Co-authored-by: dbroqua <dbroqua@mousur.org> Co-authored-by: Ryan <fauxpark@gmail.com>
2021-01-20Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-01-20Remove `DESCRIPTION`, N-Q (#11631)Ryan
2020-12-23Merge remote-tracking branch 'origin/master' into developQMK Bot
2020-12-23Remove comments about custom ldscript for Teensy LC (#11224)Ryan
2020-12-21Merge remote-tracking branch 'origin/master' into developQMK Bot
2020-12-21Initial list of keyboards to exclude from CI (#11213)Zach White
2020-12-03Add board specific to Proton-C, with usual defaults turned on. (#10976)Nick Brassel
- Set all other ChibiOS defaults to 'off', when not targeting Proton-C - Modified all existing F303 boards to point at the QMK_PROTON_C to ensure repeatable binary output - Modified version.h generation so that SKIP_VERSION=yes generates the same output
2020-11-25Added pcurt854 keymap to Preonic keyboard (#10911)pcurt854
2020-11-16[Keymap] Add user keymaps to qmk master (#10870)bghull
* Create user keymaps * Prepare user keymaps for PR Co-authored-by: bghull <35785950+BaneJammin@users.noreply.github.com>
2020-10-14Fix for issue #10386 - Can't compile preonic:dudeofawesome (#10557)Filip Paryż
Co-authored-by: FilipParyz <paryz.1i12@op.p>
2020-09-22[Keymap] Adding drasbeck keymaps for lily58pro and preonic (#10013)Max Drasbeck
* added danskish keymap * Added readme.md * Clean up in keymap.c * Added license * Changed name of keymap * adjusting tapping term * added encoder functionality * housekeeping * layouts resemble the layout now * implemented suggestions from drashna * added keymap for preonic rev3 * added default layer to readme.md * removed backslashes * Update keyboards/lily58/keymaps/drasbeck/keymap.c * Update keyboards/preonic/keymaps/drasbeck/readme.md * Update keyboards/lily58/keymaps/drasbeck/rules.mk * Update keyboards/preonic/keymaps/drasbeck/keymap.c * Update keyboards/preonic/keymaps/drasbeck/keymap.c * Update keyboards/preonic/keymaps/drasbeck/keymap.c * Update keyboards/preonic/keymaps/drasbeck/keymap.c * Update keyboards/lily58/keymaps/drasbeck/rules.mk * Update keyboards/lily58/keymaps/drasbeck/rules.mk * Update keyboards/lily58/keymaps/drasbeck/rules.mk * Update keyboards/preonic/keymaps/drasbeck/rules.mk
2020-09-22[Keymap] Add pezhore preonic keymap (#10269)Brian Marsh
* Squashing commits - adding preonic keymap This adds a custom keymap, including numpad layer, emoji, and kamoji key mappings. * Removing unnecessary trailing backslash characters * removing the unnecessary json keymap * removing unnecessary trailing slashes from the default keymap * switching to tap_code * Apply suggestions from code review This should enable a toggleable numpad * adding license * Stripping out FN keycodes in favor of a momentary layer
2020-09-21[Keymap] add codecoffeecode keymap for Preonic (#10364)codecoffeecode
* Adding preonic layout * deleting unnecessary files * Fixing spacing * I need to not commit things while I'm not sober * Update keyboards/preonic/keymaps/codecoffeecode/keymap.c * Update keyboards/preonic/keymaps/codecoffeecode/keymap.c * Update keyboards/preonic/keymaps/codecoffeecode/keymap.c * Adding license header
2020-09-16[Keymap] Badger keymaps/userspace (#10239)Dan White
* Badger keymaps * bug fix - linter * code review feedback and ortholinear bugs * cleanup * backing out suspect bug after doing additional research * code review feedback * code review feedback * changing default badger keymap and small bugfix
2020-08-29Better handle LTO_ENABLE (#9832)Drashna Jaelre
* Better handle LTO_ENABLE Especially when calling from command line * Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE * Remove long for LTO from show_options.mk
2020-07-15[Keyboard] Update preonic/Kjwon15 layout (#9718)Jeong Arm
2020-06-29Fix WORKMAN layer typo in dudeofawesome planck/preonic (#9576)Guillaume Gérard
2020-06-17Fix error_log complaint about Preonic layouts (#9443)Ryan
2020-06-15[Keymap] Add "shwilliam" Preonic keymap (#9409)William Lindvall
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-05-302020 May 30 Breaking Changes Update (#9215)James Young
* Branch point for 2020 May 30 Breaking Change * Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954) * Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957) * Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958) * Migrate `ACTION_LAYER_MODS` to `LM()` (#8959) * Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968) * Convert V-USB usbdrv to a submodule (#8321) * Unify Tap Hold functions and documentation (#8348) * Changing board names to prevent confusion (#8412) * Move the Keyboardio Model01 to a keyboardio/ subdir (#8499) * Move spaceman keyboards (#8830) * Migrate miscellaneous `fn_actions` entries (#8977) * Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979) * Organizing my keyboards (plaid, tartan, ergoinu) (#8537) * Refactor Lily58 to use split_common (#6260) * Refactor zinc to use split_common (#7114) * Add a message if bin/qmk doesn't work (#9000) * Fix conflicting types for 'tfp_printf' (#8269) * Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480) * Refactor and updates to TKC1800 code (#8472) * Switch to qmk forks for everything (#9019) * audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484) * Audio enable corrections (2/3) (#8903) * Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582) * Audio enable corrections (Part 4) (#8974) * Fix typo from PR7114 (#9171) * Augment future branch Changelogs (#8978) * Revert "Branch point for 2020 May 30 Breaking Change"
2020-05-15[Keymap] adds pvillano's preonic keymap (#9106)Peter (Rocky) Villano
* adds pvillano's preonic keymap * Remove unnecessary "\" (tested - ok)
2020-05-06[Keymap] Custom preonic layout optimised for programming (#8263)Alex Daigre
* my new layout, draft one, untested. * updated mapping to include more keys * updated layout name to be more descriptive. Updated readme with more information. * added more info to the readme and spellchecked it. * Added the Json for the keyboard layout images and updated the readme to reflect this. * Updated Image link Updated Image link so that it links to the correct place * updated copyright info to include MY name. * Updated copyright attribuatation to include the author of the file I modified. * added the backlighting key back to the adjust layer so that it is usable. * updated the name of the keymap to match my github name.
2020-04-20Updated personal preonic keymap (#8851)Elisiano Petrini
2020-02-21Added custom keymap for preonic (#7548)Elisiano Petrini
* Added custom keymap * Update keyboards/preonic/keymaps/elisiano/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Address PR comments and added CTL_T(KC_ESC) on other layouts as well Co-authored-by: Ryan <fauxpark@gmail.com>
2020-02-13[Keymap] Add personal keymap (#7338)Keelhauler
* Copy default config * Copy and edit Preonic keymap layers * Update README
2020-02-07[Keymap] Add users/alfrdmalr and switch to layouts (#8030)Alfred Maler
* WIP do not merge * first pass at custom preonic layout * add auto shift and reset via leader key * Update readme * update copyright notice * formatting changes * fix: use MO instead of process_record_user * added backslash and moved grave position * remove extraneous 'j' characer in NUMPAD template * update template formatting * remove process_record_user * swap "!" with "@" * fix readme formatting * update readme layout image * restore settings layer * add windows minimize sequence * fix: switch to correct seq function for three-key sequence * fix: missing semicolon * refactor: move keymap to userspace and generic 5x12 layout * add numlock to numpad layer * add readme * update readme formatting * remove unused wrappers from layout keymap * update readme title to reflect new location * remove alfrdmalr directory from preonic/keymaps * clean up user config
2020-01-30Trim firmware sizes from default rules.mk, part 3 (#8045)ridingqwerty
2020-01-20[Keymap] Feature/preonic/rev3/alfrdmalr (#7870)Alfred Maler
* WIP do not merge * first pass at custom preonic layout * add auto shift and reset via leader key * Update readme * update copyright notice * formatting changes * fix: use MO instead of process_record_user * added backslash and moved grave position * remove extraneous 'j' characer in NUMPAD template * update template formatting * remove process_record_user * swap "!" with "@" * fix readme formatting * update readme layout image
2020-01-18[Keymap] Added mverteuil keymaps and userspace common code (#7876)M. de Verteuil
* Added mverteuil content - Userspace - Knops keymap - Preonic keymaps * Simplified and replaced some magic numbers * Convert tabs to spaces * Clean up LED handling, better animation, better layer init * Use get_highest_layer per @drashna suggestion * Reorder prototypes/reformat * Simplified/more expessive and fixed initial layer LED * Remove changes to git ignored files
2020-01-07Juno (#7652)Juno Nguyen
* Added community layout juno and junonum; removed poorly maintained variants of juno; added junonum-a47. * Added community layout juno and junonum; removed poorly maintained variants of juno; added junonum-a47. * updated layout type for juno * Performing requested changes; renaming a47; fine-tuning of codes in community layout keymaps. * Fine tuning to requested changes. * Further tuning to suggestion. * Update layouts/community/ortho_4x12/juno/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update layouts/community/ortho_4x12/juno/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/maartenwut/atom47/keymaps/junonum_a47/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/maartenwut/atom47/keymaps/junonum_a47/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com> Co-authored-by: fauxpark <fauxpark@gmail.com>
2019-12-04[Keymap] [preonic/kjwon15] Support led key (#7543)Jeong Arm
2019-11-25[Keyboard] Add hand swap config matrix for preonic rev 3 (#7460)Martin Kauppinen
* Add hand swap config matrix for preonic rev 3 * Refactor hand swap config matrix into revision source files
2019-11-14[Core] Cleanup rules.mk for F303 keyboards (#7306)fauxpark
* Cleanup rules.mk for F303 keyboards * Fix small typo
2019-11-07[Keyboard] Enable RGB Light on ARM OLKB Keyboards (#7293)Drashna Jaelre
* Enable RGBLight on Planck Rev6 * Enable RGBLight on Preonic Rev3 All hail zvecr!
2019-10-25Cleanup rules.mk for 32U4 keyboards, N-Q (#7147)fauxpark
2019-10-22[Keymap] Add userspace and personal keymaps (#7093)Michael Guterl
* Add Planck keymap and custom keycodes to userspace * Add Preonic keymap and extract common ortho layers and keycodes * Add Leaf60 WKL keymap * Add M60-A keymap * Add Levinson keymap * Fix links in personal readmes * Use flash target * Remove duplicate definition Co-Authored-By: fauxpark <fauxpark@gmail.com> * Remove superfluous line endings * Planck and preonic encoder should have the same behavior * Use higher level API Co-Authored-By: fauxpark <fauxpark@gmail.com> * Use layouts to reduce planck/levinson duplication * Update flash instructions for levinson
2019-10-20[Keyboard] Use GPIO macros for E6 LED in Planck and Preonic default keymaps ↵fauxpark
(#7098)
2019-10-20[Keymap] Romain's Preonic layout (#7067)Romain Gehrig
* Add customized preonic layout * Add a README detailing a bit the differences from the default preonic layout * Apply suggestions from code review Co-Authored-By: fauxpark <fauxpark@gmail.com> * Remove unnecessary end-of-line backslashes * Import fix for startup sound (thanks @drashna) * Remove unnecessary layers and keycodes * Bring back the _QWERTY layer code Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
2019-10-11[Keymap] laurentlaurent's preonic keymap (#6977)Laurent Lao
* Removed ugfx binary because of antivirus * Created laurent's keymap * Made QWERTY Mac and QWERTY Windows * Rev 1.0, added _PUNC, _NAV, _EXTRA * REV 1.1, Dynamic macros start/stop now plays a sound, Lower acts like backspace on tap * Formatting fixes * Added Intellisense macro, fixed formatting * Improved ergonomics/muscle mem on punctuation lay * Added Raise Tap to Backspace * Mirrored Ergodox, added One-Handed * Added layers in README.md, added Caps lock, Scroll lock * Moved Caps to better location * Added ErgoDox link * Edit Readme.md with more layer switching information * Modified _PUNC for muscle memory * Reverted .gitignore and .vscode settings.json to reflect master * Improved formatting according to PR review * QMK_KEYBOARD_H def for Intellisense fixed->rev3.h * .gitignore diff fix * Fixing settings.json diff * Update settings.json * Update keyboards/preonic/keymaps/laurentlaurent/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com>
2019-10-08[Keymap] Adding my keymaps for Preonic and XD75 (#6874)Pittyolo
* Added my keymaps * Update to readmes * Update keyboards/preonic/keymaps/pitty/config.h Thanks! Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/preonic/keymaps/pitty/config.h Thanks! Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/preonic/keymaps/pitty/config.h Thanks! Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update config.h * Update keyboards/preonic/keymaps/pitty/keymap.c Thanks! Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Removed copyrighted material * Update keyboards/xd75/keymaps/pitty/keymap.c Thanks! Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update config.h * Update config.h * Update config.h * Update keymap.c * Update keymap.c * Update config.h * Update keymap.c * Update keyboards/preonic/keymaps/pitty/config.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/preonic/keymaps/pitty/config.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
2019-09-30[Keymap] Adds Egstad Preonic Profile (#6837)Jordan Egstad
* setup local build config, created npm build script to speed things up * removed some profiles and gutted readme * began configuring default and lower layout * lower: fixed right arrow and added music toggle * began configuring default and lower layout * changed startup song * updated comment typos * I did that thing where i basically refactored everything :) * Converted 2U key to 1U's * Reorganized and tidied up * Reorganized and tidied up * space now changes layers * updated numbpad * updated readme * removed unwanted files * addressed change requests