summaryrefslogtreecommitdiff
path: root/keyboards/handwired
AgeCommit message (Collapse)Author
2020-10-24[Keyboard] Freoduo - handwired split ortho keyboard. (#10724)Filip Paryż
* Freoduo v1 - with fixes from @fauxpark and rebased to master branch of QMK. * One more suggested fix from @fauxpark * Fixes after @drashna review.
2020-10-23[Keyboard] Add pteron44 keyboard (#10708)Fidel Coria
* Add pteron44 * Apply suggestions from code review Co-authored-by: Ryan <fauxpark@gmail.com> * Apply suggestions from code review part 2 Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-10-17Ferris reorganization (#10564)Pierre Chevalier
* Add my own keymap * Layer 0: Workman * Layer 1: RSTHD (my own take on it) * Layer 2: Mouse * Layer 3: Navigation * Layer 4: Symbols right * Layer 5: Symbols left * Layer 6: Fn keys * Layer 7: Numbers * Layer 8: Vim and misceallaneaous accessible from any other layer * Move the current code to a 0.1 folder in preparation for upcoming changes Version 0.2 is currently being prototyped and uses an arm chip which will need its own firmware. There is also the Ferris sweep which uses a pro-micro compatible board which will need its own directory. * Move Ferris out of handwired and into the light The keyboard is now well out of the prototype phase as tens of them have been produced and acquired by various people. With 0.2 coming out, adoption is going to increase again as the board will be available for sale at some recognized vendors. Now is probably a good time to recognize its status as more than a prototype :) * Add code for the Ferris Sweep (a.k.a cradio) The Ferris Sweep is a creation of the talented @davidphilipbarr, a.k.a DPB. It has the key layout of a Ferris and uses a pro-micro connected to the switches via direct pins so that diodes are not needed and the soldering is minimal. With their blessing, I took the code for it from DPB's own repo: https://github.com/davidphilipbarr/36keys/tree/master/qmk/cradio and did some adaptations such as removing commented out code, enabling EE_HANDS and mouse keys for consistency with my existing Ferris code. * Fix indentation in rules.mk * Fix indentation in sweep's config * Remove unnecessary lines from sweep's rules.mk * Remove unnecessary lines from sweep's rules.mk * Rename 0.1 to 0_1 This avoids the dot looking like the separation between a filename and its extension. In the same commit, bring matrix.c to the 0_1 folder as this was needed for the code to compile properly (matrix.c is referred to in the readme under `0_1` and is specific to that revision of the firmware). * Update copyright statements for Sweep
2020-10-13[Keyboard] update keymap of zergo keyboard (#10402)Evgenii
* Rename keyboards/handwired/zergo/keymap.c to keyboards/handwired/zergo/keymaps/default/keymap.c * Update rules.mk * Update rules.mk * Update bootloader.mk * Update rules.mk * Update bootloader.mk * Update info.json * Update rules.mk * Update zergo.h * Update info.json * Update keymap.c * Update keyboards/handwired/zergo/info.json Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/handwired/zergo/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * update layout * update zergo layout * update layout * Update keyboards/handwired/zergo/keymaps/default/keymap.c Co-authored-by: ridingqwerty <george.g.koenig@gmail.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>
2020-10-13Add STM32Duino to bootloader selection (#10558)Ryan
2020-10-08Clean ChibiOS platform files (#10505)Reibl János Dániel
* Clean ChibiOs platform files * Remove I2C and timer definitions * Remove unnecessary files and rename readme Co-authored-by: Janos Daniel Reibl <janos.daniel.reibl@protonmail.com>
2020-10-07[Keyboard] LeftyNumpad Keyboard (#10500)Tom Swartz
* Clean LeftyNumpad code * Fix typo in recently renamed file * Fix issues with keymap layout * Initial PR Feedback fixes * Update keyboards/handwired/leftynumpad/config.h Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/handwired/leftynumpad/config.h Co-authored-by: Joel Challis <git@zvecr.com> * Apply suggestions from code review Co-authored-by: Joel Challis <git@zvecr.com> * Apply suggestions from code review Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com> * Add fixes based on PR feedback * Update keyboards/handwired/leftynumpad/readme.md Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-10-06[CLI] Add c2json (#8817)Erovia
* Basic keymap parsing finally works * Add 'keymap.json' creation to the qmk.keymap module * Add tests and fix formatting * Fix/exclude flake8 errors * Convert keymap.c to valid keymap.json * Fix some errors * Add tests * Finalize keymap.json creation, add json template * Add docs * Move pygments to the standard requirements * Add support for nameless layers, fix tests * Fix things after rebase * Add missing 'keymap' value. * Fix missing layer numbers from advanced keycodes Buckwich noticed that if the advanced keycode / layer toggling key contains a number, it goes missing. Now we properly handle them. Thx for noticing! * Apply suggestions from code review * fixup tests Co-authored-by: Zach White <skullydazed@drpepper.org> Co-authored-by: skullY <skullydazed@gmail.com>
2020-10-04[Keymap] Move my custom functions and keymaps to userspace (#10502)Reibl János Dániel
* Move my custom functions and keymaps to userspace to be able to add the STM32F411 variant of my keyboard with mostly the same functionality * Move keymaps to community layouts * Remove keymaps from userspace readme.md Co-authored-by: Janos Daniel Reibl <janos.daniel.reibl@protonmail.com>
2020-10-04[Keymap] Add onekey keymap for OLED testing (#10380)Sergey Vlasov
* Add onekey keymap for OLED testing * Add license header
2020-10-04[Keymap] Added 333fred 5x6_5 keymap (#10272)Fred Silberberg
* First pass at manuform layout. * Updates from actual usage on my board. Fixed a couple of bugs, added a stormlight quote randomizer. * Use a 32-bit timer that can actually hit 5 minutes. * Some updates after a day of usage: * Turn off WPM. It's too inaccurate and takes up a decent amount of space that can be devoted to quotes. * Turn off the OLEDs after 5 minutes * Move the keys around a bit. * Add many more quotes. * Adjust the quotes to make room for missing and misswritten WoT quote. Adjusted the keymap slightly. Adjust the mods display to include one_shots. * Revert osm on lgui as it makes start menu search impossible to use. * Use LTO_ENABLE flag. * License all of my (333fred's) keymaps as MIT. * Update users/333fred/rgb.c Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-09-29[Keyboard] Add astro65 handwired (#10449)Brandon Claveria
* Add pandemic keyboard * Fix default keymap * Add via keymap * Fix via keymap * Fix keymaps and pandamic.h * add info.json * update info.json * Apply suggestions from code review * Update keyboards/handwired/swiftrax/pandamic/info.json * make suggested changes * Add astro65 * fix info.json * Apply suggestions from code review * add more layers for via * Apply suggestions from code review * halp * add other layout * fix astro65.h * commit suggestions * Update keyboards/handwired/swiftrax/astro65/info.json
2020-09-28Add Unicode modes for `handwired/riblee_f401:riblee` (#10461)Reibl János Dániel
* Add unicode modes * Update keyboards/handwired/riblee_f401/keymaps/riblee/config.h
2020-09-28[Keyboard] Add SiCK-PAD handwired keyboard (#10429)Joel Schneider
* Add sick_pad * Adjust setup for Proton C * Add readme * Add info.json * Make requested changes * Resolve PR issues
2020-09-24format code according to conventions [skip ci]QMK Bot
2020-09-23[Keyboard] add 3dp660 handwired (#10296)gooberpsycho
* Create keymap.c * Add files via upload * Added files for handwired 3d printed clueboard 660 * create via layout files * added layout files for via * updated product ID to fix id conflicts * change product ID to fix ID conflicts. * fixed capitalization error that was causing issues * fixed capitalization issues. * fix syntax errors * Fixed syntax errors (stray punctuation) * Compatibility fixes * Compatibility fixes * Compatibility fixes * Compatibility fixes * capitalization fixes * Compatibility fixes * Compatibility fixes * Compatibility Fixes * Compatibility fixes * Compatibility fixes * Compatibility changes * upkeep, fixing typos * Update keyboards/handwired/3dp660/config.h Removed Description line * Update keyboards/handwired/3dp660/rules.mk correct bootloader * Update keyboards/handwired/3dp660/3dp660.h fix case sensitive typos * Update keyboards/handwired/3dp660/keymaps/default/keymap.c change tab indentation to space indentations. * Update keyboards/handwired/3dp660/keymaps/via/keymap.c change tab indentations to space indentations * Delete 3dp660.json This file was for VIA, and shouldn't be in this repo. I placed it here so I wouldn't misplace it in my filesystem. My apologies. * Update info.json change suggestions to other file said to lowercase "ansi", caused reference issues, changed all instances of "ANSI" to "ansi". * Update keymap.c change suggestions to other file said to lowercase "ansi", caused reference issues, changed all instances of "ANSI" to "ansi". * Update keymap.c more capitalization fixes * Update keyboards/handwired/3dp660/readme.md shortened imgur url * Update keyboards/handwired/3dp660/rules.mk remove extraneous comments * Delete config.h * Update keyboards/handwired/3dp660/rules.mk * Update 3dp660.c add license headers to all .c and .h files * Update 3dp660.h added license header to all .c and .h files. * Update keymap.c added license header to all .c and .h files. * Update keymap.c added license header to all .c and .h files. * Update keyboards/handwired/3dp660/readme.md Add maintainer URL * Update keyboards/handwired/3dp660/keymaps/default/keymap.c remove extraneous default keymap layers * Update keyboards/handwired/3dp660/keymaps/default/rules.mk * Update rules.mk Moved LTO to keyboard level. * Update rules.mk Moved LTO to keyboard level. * Delete rules.mk Made obsolete by LTO move to keyboard level. * Update keyboards/handwired/3dp660/rules.mk capitalization errors. * Apply suggestions from code review Housekeeping, changing code for readability.
2020-09-22add handwired/swiftrax/retropad (#10331)Brandon Claveria
* add retropad * fix indicator leds * fix bootmagic * fix led indicators * fix keymap * fix keymap * fix keymap * fix keymap * fix license headers * Apply suggestions from code review Co-authored-by: Drashna Jaelre <drashna@live.com> * Apply suggestions from code review Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Swiftrax <swiftrax@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-09-22[Keyboard] Fujitsu T111 keyboard (#10262)Dmitry Nosachev
* Fujitsu T111 keyboard * info.json: fixed missing key on top row * info.json: fixed name and maintaner fields * Update keyboards/handwired/t111/keymaps/oleg/keymap.c * Update keyboards/handwired/t111/config.h * Update keyboards/handwired/t111/keymaps/oleg/keymap.c * Update keyboards/handwired/t111/keymaps/oleg/keymap.c * Apply suggestions from code review * Update keyboards/handwired/t111/readme.md
2020-09-22Updates to handwired/riblee_f401 keymaps (#10376)Reibl János Dániel
* Add new keymap with Hungarian accent support Add flashing support * Remove unnecessary mcu config * Use bootmagic instead of custom macros
2020-09-22[Keyboard] add Handwired/Curiosity (#10369)Spaceman
* Add curiosity * Add default keymap * Update config.h * Apply suggestions from code review * Update keyboards/handwired/curiosity/rules.mk * Update keymap.c * Apply suggestions from code review
2020-09-21Fix backlight for F401/F411 blackpill onekey examples (#10320)Sergey Vlasov
Fix configs to make the `handwired/onekey/blackpill_f401:backlight` and `handwired/onekey/blackpill_f411:backlight` examples actually compile and work: - Use `PWMD5` instead of `PWMD2` for backlight, which matches the default value of `BACKLIGHT_PAL_MODE` (AF02 for pin A0 is `TIM5_CH1`) and does not conflict with the default value of `STM32_ST_USE_TIMER`. - Enable `HAL_USE_PWM` in halconf.h and `STM32_PWM_USE_TIM5` in mcuconf.h, so that `PWMD5` could be used.
2020-09-20Disable the command feature for onekeys (#10366)Sergey Vlasov
There is no way to invoke the command feature while having just a single physical key, and disabling that feature fixes build for keymaps like `handwired/onekey/promicro:rgb` without resorting to LTO (the command feature consumes more than 4900 bytes with avr-gcc 8.4.0).
2020-09-18Add STM32F401/F411 to mcu_selection.mk (#10278)Ryan
* Reorder STM32 MCUs * Add STM32F4xx to mcu_selection.mk * Set MCU for phoenix and tkw/stoutgat/v2/f411
2020-09-07Remove HD44780 References, Part 3 (#10238)James Young
* remove HD44780_ENABLE rules: G-H * remove HD44780_ENABLE config: G-H
2020-09-05[Keyboard] add Pandamic handwired (#10227)Brandon Claveria
* Add pandemic keyboard * Fix default keymap * Add via keymap * Fix via keymap * Fix keymaps and pandamic.h * add info.json * update info.json * Apply suggestions from code review * Update keyboards/handwired/swiftrax/pandamic/info.json * make suggested changes
2020-08-29format code according to conventions [skip ci]QMK Bot
2020-08-29Allow joysticks to be used without analog pins (#10169)Zach White
* Allow joysticks to be used without analog pins * change how analog/digital joysticks are specified
2020-08-29Better handle LTO_ENABLE (#9832)Drashna Jaelre
* Better handle LTO_ENABLE Especially when calling from command line * Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE * Remove long for LTO from show_options.mk
2020-08-29Remove unused CORTEX_VTOR_INIT (#10053)Ryan
2020-08-29Fix joystick compile issues (#9949)Ryan
2020-08-29[Keyboard] relocating boards by flehrad (#9635)flehrad
Co-authored-by: flehrad <flehrad@users.noreply.github.com>
2020-08-29Hid joystick interface (#4226)a-chol
* add support for hid gamepad interface add documentation for HID joystick Add joystick_task to read analog axes values even when no key is pressed or release. update doc Update docs/feature_joystick.md Manage pin setup and read to maintain matrix scan after analog read * Incorporates patches and changes to HID reporting There are some patches provided by @a-chol incorporated on this commit, and also some changes I made to the HID Report structure. The most interesting is the one dealing with number of buttons: Linux doesn't seem to care, but Windows requires the HID structure to be byte aligned (that's in the spec). So if one declares 8/16/32... buttons they should not have any issues, but this is what happens when you have 9 buttons: ``` bits |0|1|2|3|4|5|6|7| |*|*|*|*|*|*|*|*| axis 0 (report size 8) |*|*|*|*|*|*|*|*| ... |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| |*|*|*|*|*|*|*|*| axis 6 |*|*|*|*|*|*|*|*| first 8 buttons (report size 1) |*| | | | | | | | last of 9 buttons, not aligned ``` So for that I added a conditonal that will add a number of reports with size 1 to make sure it aligns to the next multiple of 8. Those reports send dummy inputs that don't do anything aside from aligning the data. Tested on Linux, Windows 10 and Street Fighter (where the joystick is recognized as direct-input) * Add save and restore of each pin used in reading joystick (AVR). Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc instead of an output pin from the MCU. Fix joystick report id Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes) Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis. Documentation fixes * Fix port addressing for joystick analog read * The other required set of changes As per the PR, the changes still holding it up. Add onekey for testing. Fix ARM builds. Fix device descriptor when either axes or buttons is zero. Add compile-time check for at least one axis or button. Move definition to try to fix conflict. PR review comments. qmk cformat * avoid float functions to compute range mapping for axis adc reading * Remove V-USB support for now. Updated docs accordingly. * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios * Fix HID joystick report sending for ChibiOS. Add one analog axis to the onekey:joystick keymap. Fix pin state save and restore during joystick analog read for STM32 MCUs. * Update tmk_core/protocol/chibios/usb_main.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/lufa/lufa.c Co-Authored-By: Ryan <fauxpark@gmail.com> * Add missing mcuconf.h and halconf.h to onekey:joystick keymap. Add suggested fixes from PR. * Switch saveState and restoreState signature to use pin_t type. onekey:joystick : add a second axis, virtual and programmatically animated. * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Update docs/feature_joystick.md Co-Authored-By: Ryan <fauxpark@gmail.com> * Add PR corrections * Remove halconf.h and mcuconf.h from onekey keymaps * Change ADC_PIN to A0 Co-authored-by: achol <allecooll@hotmail.com> Co-authored-by: José Júnior <jose.junior@gmail.com> Co-authored-by: a-chol <achol@notamail.com> Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-08-29Change analogRead calls to analogReadPin (#9023)Ryan
* Change analogRead calls to analogReadPin * Add ChangeLog * Update docs, remove mention of `analogRead()` * Retarget changelog for next round
2020-08-29Initial work for consolidation of ChibiOS platform files (#8327)Nick Brassel
* Initial work for consolidation of board files and default ChibiOS configs. * Migrate F401/F411 black pills for testing. * Add early init bootloader jump flag. * Add support for I2C in order to use i2c_scanner keymap. * Add F401/F411 HSE bypass to get things booting. * Exempt "hooked" ChibiOS conf files from updater script. * Fix up ordering for bootloader_defs file check. * Match previous $(KEYBOARD_PATHS) value for Proton-C, updated for all board configs.
2020-08-26update info.json file for handwired/zergo (#10117)Evgenii
* Rename keyboards/handwired/zergo/keymap.c to keyboards/handwired/zergo/keymaps/default/keymap.c * Update rules.mk * Update rules.mk * Update bootloader.mk * Update rules.mk * Update bootloader.mk * Update info.json * Update rules.mk * Update zergo.h * Update info.json * Update keymap.c * Update keyboards/handwired/zergo/info.json * Update keyboards/handwired/zergo/keymaps/default/keymap.c
2020-08-26[Keyboard] Handwired pteron38 (#10035)Fidel Coria
* setup handwired pteron38 * Clean up readme * readme follow template * c formatting conventions * remove file size comments from rules.mk * use direct link to imgur image * Apply suggestions from code review * add license
2020-08-24Upstream a good default keymap for the Ferris handwired (#9926)Pierre Chevalier
* Proper default keymap * Update keyboards/handwired/ferris/keymaps/default/readme.md
2020-08-22[Keyboard] Pterodactyl handwired (#9884)myoung34
* Working bluetooth fork of dactyl * Refactor thanks to zvecr * Final refactor per PR comments * Pragma once * Update keyboards/handwired/pterodactyl/pterodactyl.h * Update keyboards/handwired/pterodactyl/readme.md * Update keyboards/handwired/pterodactyl/rules.mk * Update keyboards/handwired/pterodactyl/rules.mk * Update keyboards/handwired/pterodactyl/config.h * Update keyboards/handwired/pterodactyl/pterodactyl.h * Update keyboards/handwired/pterodactyl/config.h * Update keyboards/handwired/pterodactyl/pterodactyl.h * update readme * Update keyboards/handwired/pterodactyl/keymaps/default/keymap.c * Update keyboards/handwired/pterodactyl/info.json * Update keyboards/handwired/pterodactyl/readme.md * Update keyboards/handwired/pterodactyl/config.h * Update keyboards/handwired/pterodactyl/info.json * Update keyboards/handwired/pterodactyl/keymaps/default/keymap.c * Update keyboards/handwired/pterodactyl/keymaps/default/keymap.c * Update keyboards/handwired/pterodactyl/keymaps/default/keymap.c * Update keyboards/handwired/pterodactyl/keymaps/default/keymap.c * Update keyboards/handwired/pterodactyl/pterodactyl.h * Update keyboards/handwired/pterodactyl/keymaps/default/keymap.c * Update keyboards/handwired/pterodactyl/matrix.c * Fix/add formatting and info/keymap.json * Update keyboards/handwired/pterodactyl/keymaps/default/keymap.json * lint default/keymap.json * format info.json
2020-08-19Rename keyboards/handwired/zergo/keymap.c to ↵Evgenii
keyboards/handwired/zergo/keymaps/default/keymap.c (#10094)
2020-08-18[Keyboard] zErgo handwired (#9990)Evgenii
* Create readme.md * Add files via upload * Update readme.md * Create info.json * Update info.json * Update and rename kb.c to zergo.c * Rename kb.h to zergo.h * Add files via upload * Update keymap.c * Update config.h * Update zergo.c * Update zergo.h * Update rules.mk * Update keymap.c * Rename Makefile to makefile * Update zergo.c * Update zergo.h * Update keymap.c * Update config.h * Update config.h * Update zergo.h * Update rules.mk * Update rules.mk * Update config.h * Update keyboards/handwired/zergo/keymap.c * Update keyboards/handwired/zergo/keymap.c * Update keyboards/handwired/zergo/zergo.h * Update keyboards/handwired/zergo/keymap.c * Update keyboards/handwired/zergo/keymap.c * Update keyboards/handwired/zergo/rules.mk * Update keyboards/handwired/zergo/keymap.c * Update readme.md * Update readme.md * Update keyboards/handwired/zergo/readme.md * Update readme.md * Update keyboards/handwired/zergo/config.h * Update keyboards/handwired/zergo/config.h * Update keyboards/handwired/zergo/info.json * Update readme.md * Update keyboards/handwired/zergo/readme.md * Update keyboards/handwired/zergo/readme.md * Delete makefile
2020-08-18[Keyboard] Bento handwired macro pad (#9973)Blake
* [Keyboard] Add ghostseven/bento * Correct attribution, Dwin17 * Formatting change * Markdown formating * Update keyboards/ghostseven/bento/info.json * Update keyboards/ghostseven/bento/readme.md * Update keyboards/ghostseven/bento/rev1/config.h * Update keyboards/ghostseven/bento/rev1/rules.mk * Update keyboards/ghostseven/bento/rev1/rules.mk * Update keyboards/ghostseven/bento/rev1/rules.mk * Update keyboards/ghostseven/bento/rev1/rules.mk * Update keyboards/ghostseven/bento/rev1/config.h * Update keyboards/ghostseven/bento/rev1/rev1.c * Update keyboards/ghostseven/bento/rev1/rev1.c * Update keyboards/ghostseven/bento/rev1/config.h * Update keyboards/ghostseven/bento/rev1/rules.mk * Update keyboards/ghostseven/bento/readme.md * Delete config.h * Delete config.h * Update rules.mk * Rename keyboards/ghostseven/bento/readme.md to keyboards/handwired/bento/readme.md * Rename keyboards/ghostseven/bento/rules.mk to keyboards/handwired/bento/rules.mk * Rename keyboards/ghostseven/bento/info.json to keyboards/handwired/bento/info.json * Rename keyboards/ghostseven/bento/bento.h to keyboards/handwired/bento/bento.h * Rename keyboards/ghostseven/bento/bento.c to keyboards/handwired/bento/bento.c * Rename keyboards/ghostseven/bento/rev1/rules.mk to keyboards/handwired/bento/rev1/rules.mk * Rename keyboards/ghostseven/bento/rev1/rev1.h to keyboards/handwired/bento/rev1/rev1.h * Rename keyboards/ghostseven/bento/rev1/rev1.c to keyboards/handwired/bento/rev1/rev1.c * Rename keyboards/ghostseven/bento/rev1/config.h to keyboards/handwired/bento/rev1/config.h * Rename keyboards/ghostseven/bento/keymaps/default/keymap.c to keyboards/handwired/bento/keymaps/default/keymap.c * Update bento.h * Change make location to handwired dir. * added alt keymap submited by cbc02009 * Added mac dev keymap * Licence updates
2020-08-16[Keyboard] Wabi handwire (#9704)Rossman360
* cleaning up * got some working bones * working pretty well * really livin' now * all done * copyright adjustments * default keymap * readme * no descrip * remove trailing slashes * remove blank line * remove trailing slashes * clean up readme * clean up rules spacing * bootloader spacing * made quick json from KLE converter * remove postageboard mini references * add actual manu and product values * add make example * rework * remove double bootload define * smoller image * liscensed * correct dimensions * dimensions
2020-08-17Fix sendstring call in onekey ADC keymap (#10031)Ryan
2020-08-13fix handwired/swiftrax/cowfish PID and VID (#9922)Brandon Claveria
Co-authored-by: Swiftrax <swiftrax@gmail.com>
2020-08-07[Keyboard] Add "Selene" to the handwired section (#9920)David Camp
* Added handwired/selene based on handwired/106_with_trackpoint * now at least parially working * Selene Firmware 1, ready * Updated Readme to align more with Template * Added URL to info.json * Fix status Lights being wired incorrectly * Update keyboards/handwired/selene/config.h * Update keyboards/handwired/selene/keymaps/Bpendragon/keymap.c * Update keyboards/handwired/selene/selene.c * Update keyboards/handwired/selene/selene.h * Changes for PR requested by fauxpark * Adds `default` keymap * Renames `Bpendragon` to `bpendragon` * Removes uneeded descriptors and options * Simplifies return statement in `keymap.c` * Removes trailing slashes from layout in `keymap.c` * Updates `readme.mk` to reflect default keymap * Aligns comments in `rules.mk` * Forced folder name update to lowercase * Apply suggestions from code review
2020-08-07handwired/dactyl_manuform/5x6_5: fix broken keyboard and keymap reference ↵Jan Christoph Ebersbach
(#9921)
2020-08-06[Keyboard] Add handwired 12*5 blackpill keyboard (#9855)Reibl János Dániel
* Add new handwired keyboard with F401 blackpill * Re-indent * Add README.md * Apply suggestions from code review * Re-indent * Add README.md * Apply suggestions from code review * Fix spacing * Modify keymap Add license header
2020-08-03fix Dactyl-Manuform 5x6_5 compilation (#9902)James Young
2020-07-31[Keyboard] Added a new handwired 2x3,2x4,2x5 keyboard called the ↵Kyle
Stream_cheap (#9871) * Added a new handwired 2x3,2x4,2x5 keyboard called the Stream_cheap stream cheap is a diy version of the El Gato Stream deck minus the LCD keys but you can always get relegendable keycaps to change the icon if you want * added missing commas in info.json files * update config to change pin definition * changed keymap.c for 2x4 was trying to add macros and multi key commands to the keymap, i added 2 ctrl commands that have more than one key i.e. ctrl-k-c (visual studio comment hot key) and i added a test string to see how type out a string with the press of a button * testing more changes to the keymap to the 2x5 * Update keyboards/handwired/stream_cheap/2x3/2x3.c * Update keyboards/handwired/stream_cheap/2x3/config.h * Update keyboards/handwired/stream_cheap/2x3/rules.mk * Update keyboards/handwired/stream_cheap/2x5/config.h * Update keyboards/handwired/stream_cheap/2x5/info.json * Update keyboards/handwired/stream_cheap/2x3/config.h * Update keyboards/handwired/stream_cheap/2x3/info.json * Update keyboards/handwired/stream_cheap/2x4/config.h * Update keyboards/handwired/stream_cheap/2x4/info.json * Update keyboards/handwired/stream_cheap/2x4/keymaps/default/keymap.c * Update keyboards/handwired/stream_cheap/2x5/info.json * Update keyboards/handwired/stream_cheap/2x5/config.h * Update keyboards/handwired/stream_cheap/2x5/rules.mk * Update keyboards/handwired/stream_cheap/2x4/2x4.c * Update keyboards/handwired/stream_cheap/2x4/config.h * Update keyboards/handwired/stream_cheap/2x4/info.json * Update keyboards/handwired/stream_cheap/2x5/2x5.c * Update keyboards/handwired/stream_cheap/2x4/rules.mk * removed file as per request of user zvecr * removed line in rules.mk for 2x5 * Update keyboards/handwired/stream_cheap/2x5/keymaps/default/keymap.c * Apply suggestions from code review changes suggested in code review
2020-07-31[Keyboard] Add Dactyl Manuform 5x6 with 5 thumb keys (#9659)Jan Christoph Ebersbach
* [Keyboard] Add Dactyl Manuform 5x6 with 5 thumb keys * fix: remove unused code block * fix: remove unused code block * Remove unused build options