summaryrefslogtreecommitdiff
path: root/keyboards/40percentclub
AgeCommit message (Collapse)Author
2021-09-26Remove unused `IS_COMMAND()` instances and Magic Key definitions (#14610)James Young
* Remove unused IS_COMMAND() instances from keyboard-level config.h, 0-9 * Remove unused IS_COMMAND() instances from keyboard-level config.h, A-B * Remove unused IS_COMMAND() instances from keyboard-level config.h, C-D * Remove unused IS_COMMAND() instances from keyboard-level config.h, E-G * Remove unused IS_COMMAND() instances from keyboard-level config.h, handwired * Remove unused IS_COMMAND() instances from keyboard-level config.h, H-M * Remove unused IS_COMMAND() instances from keyboard-level config.h, N-R * Remove unused IS_COMMAND() instances from keyboard-level config.h, S-Z * Remove unused Magic Key definitions from keyboard-level config.h, 0-9 * Remove unused Magic Key definitions from keyboard-level config.h, A * Remove unused Magic Key definitions from keyboard-level config.h, B * Remove unused Magic Key definitions from keyboard-level config.h, C * Remove unused Magic Key definitions from keyboard-level config.h, D-E * Remove unused Magic Key definitions from keyboard-level config.h, F-H * Remove unused Magic Key definitions from keyboard-level config.h, handwired * Remove unused Magic Key definitions from keyboard-level config.h, I-K * Remove unused Magic Key definitions from keyboard-level config.h, L-M * Remove unused Magic Key definitions from keyboard-level config.h, N-R * Remove unused Magic Key definitions from keyboard-level config.h, S-V * Remove unused Magic Key definitions from keyboard-level config.h, W-Z * Merge remote-tracking branch 'upstream/master' into clean/command_and_magic * Remove remaining unused IS_COMMAND() instances from keyboard-level config.h
2021-09-21Remove audio pin references in rules.mk (#14532)Ryan
2021-09-20Remove backlight pin references in rules.mk (#14513)Ryan
2021-09-12Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379)Ryan
2021-09-12Remove width, height and key_count from info.json (#14274)Ryan
2021-09-10Remove bootloader listings from rules.mk (#14330)Ryan
2021-09-05Remove empty override functions (#14312)Ryan
* Remove empty override functions, 0-9 * Remove empty override functions, A-D * Remove empty override functions, E-H * Remove empty override functions, handwired * Remove empty override functions, I-L * Remove empty override functions, M-P * Remove empty override functions, Q-T * Remove empty override functions, U-Z
2021-08-16Remove MIDI Configuration boilerplate (#11151)James Young
* remove keyboard-level instances of `MIDI_ENABLE = no` Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]*MIDI_ENABLE[ \t]*=[ \t]*no/d' {} + ``` Co-Authored-By: Nick Brassel <nick@tzarc.org> * fix case-sensitivity issues on MIDI_ENABLE Change instances of `MIDI_ENABLE = YES` to `MIDI_ENABLE = yes`. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE[ \t]*=[ \t]*[Yy][Ee][Ss];MIDI_ENABLE = yes;g' {} + ``` * replace `# MIDI controls` with `# MIDI support` Replace `# MIDI controls` with `# MIDI support` in keyboard-level `rules.mk` files. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*MIDI[ \t]*\(controls\|support\).*;# MIDI support;g' {} + ``` * align inline comments Aligns the inline comments to the length used by the QMK AVR rules.mk template. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE *= *yes.*;MIDI_ENABLE = yes # MIDI support;g' {} + ``` * remove commented instances of `MIDI_ENABLE` from keyboard `rules.mk` files Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#\([ \t]*MIDI_ENABLE\) = yes; \1 = no ;' {} + find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;^\([ \t]*\)\(MIDI_ENABLE = no\);\2\1;' {} + find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]\+MIDI_ENABLE *= *no/d' {} + ``` * remove MIDI configuration boilerplate from keyboard config.h files Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-08-06Remove Full Bootmagic (#13846)James Young
* disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + ``` * update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta
2021-08-03Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-08-0340percentclub/nori: fix matrix reference in LAYOUT_ortho_4x8 (#13866)James Young
* 40percentclub/nori: fix matrix reference in LAYOUT_ortho_4x8 * remove ortho_4x8 from Community Layouts rule ortho_4x8 isn't a valid option here.
2021-07-26[Keymap] Drashna's Defaults cleanup (#13722)Drashna Jaelre
2021-07-27Merge remote-tracking branch 'upstream/master' into developNick Brassel
2021-07-2640percentclub/nein: update info.json layout macro reference (#13726)James Young
- change LAYOUT to LAYOUT_ortho_3x3
2021-07-20Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-07-19Six Pack and ortho_ layout updates (#13587)Suschman
Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Suschman <suschman@gmail.com>
2021-07-06`keymap_extras`: Remove deprecated defines (#12949)Ryan
2021-06-26Error log cleanup (#13349)Zach White
* error log cleanup: 40percentclub/25 40percentclub/25: Claims to support a community layout that does not exist: ortho_5x5 * error log cleanup: 40percentclub/4x4 ☒ 40percentclub/4x4: Claims to support a community layout that does not exist: ortho_4x8 ☒ 40percentclub/4x4: Claims to support a community layout that does not exist: ortho_4x16 * error log cleanup: 40percentclub/5x5 ☒ 40percentclub/5x5: Claims to support a community layout that does not exist: ortho_5x5 * error log cleanup: 40percentclub/nori ☒ 40percentclub/nori: Claims to support a community layout that does not exist: ortho_4x8 * error log cleanup: barracuda ☒ barracuda: Claims to support a community layout that does not exist: ortho_3x11 * error log cleanup: bpiphany/frosty_flake ☒ keyboards/bpiphany/frosty_flake/frosty_flake.h: LAYOUT_tkl_ansi: Nested layout macro detected. Matrix data not available! * error log cleanup: bpiphany/pegasushoof/2013 ☒ keyboards/bpiphany/pegasushoof/2013/2013.h: LAYOUT_tkl_ansi: Nested layout macro detected. Matrix data not available! * error cleanup: bpiphany/pegasushoof/2015 ☒ keyboards/bpiphany/pegasushoof/2015/2015.h: LAYOUT_tkl_ansi: Nested layout macro detected. Matrix data not available! ☒ keyboards/bpiphany/pegasushoof/2015/2015.h: LAYOUT_tkl_iso: Nested layout macro detected. Matrix data not available! * error log cleanup: 40percentclub ☒ 40percentclub/25: Claims to support a community layout that does not exist: ortho_5x10 ☒ 40percentclub/5x5: Claims to support a community layout that does not exist: ortho_5x10 * error cleanup: converter/usb_usb ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_ansi: Nested layout macro detected. Matrix data not available! ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_iso: Nested layout macro detected. Matrix data not available! ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_jis: Nested layout macro detected. Matrix data not available! ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_ansi: Nested layout macro detected. Matrix data not available! ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_iso: Nested layout macro detected. Matrix data not available! ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_jis: Nested layout macro detected. Matrix data not available! ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_ansi: Nested layout macro detected. Matrix data not available! ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_iso: Nested layout macro detected. Matrix data not available! ☒ keyboards/converter/usb_usb/usb_usb.h: LAYOUT_jis: Nested layout macro detected. Matrix data not available! * error cleanup: ergo42 ☒ ergo42/rev1: Claims to support a community layout that does not exist: ortho_4x14 * error cleanup: handwired/412_64 ☒ handwired/412_64: Claims to support a community layout that does not exist: ortho_4x16 * error log cleanup: handwired/tritium_numpad ☒ handwired/tritium_numpad: Claims to support a community layout that does not exist: nontra_6x4 * error log cleanup: handwired/xealous/rev1 ☒ handwired/xealous/rev1: Claims to support a community layout that does not exist: split60 * error log cleanup: kbdfans/kbd67/rev2 ⚠ kbdfans/kbd67/rev2: info.json uses alias name LAYOUT_65_ansi_blocker_splitbs instead of LAYOUT_65_ansi_blocker_split_bs * error cleanup: keebio/nyquist ☒ keyboards/keebio/nyquist/nyquist.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available! ☒ keyboards/keebio/nyquist/nyquist.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available! ☒ keyboards/keebio/nyquist/nyquist.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available! * error cleanup: kindakeyboards/conone65 ☒ kindakeyboards/conone65: Claims to support a community layout that does not exist: 65_iso_split_bs * error cleanup: latinpadble ☒ latinpadble: Claims to support a community layout that does not exist: pad * error cleanup: masterworks/classy_tkl/rev_a ☒ masterworks/classy_tkl/rev_a: Claims to support a community layout that does not exist: tkl_ansi_wkl * error cleanup: meira ⚠ meira/featherble: info.json uses alias name LAYOUT_ortho_4x12 instead of LAYOUT ⚠ meira/promicro: info.json uses alias name LAYOUT_ortho_4x12 instead of LAYOUT * error cleanup: nopunin10did/jabberwocky ⚠ nopunin10did/jabberwocky: MANUFACTURER in config.h is overwriting manufacturer in info.json * error cleanup: ok60 ☒ ok60: Claims to support a community layout that does not exist: 60_ansi_split_bksp_rshift * error cleanup: ok60 ☒ ok60: Claims to support a community layout that does not exist: 60_ansi_split_bksp_rshift * error cleanup: planck ☒ keyboards/planck/ez/ez.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available! ☒ keyboards/planck/ez/ez.h: LAYOUT_ortho_4x12: Nested layout macro detected. Matrix data not available! ⚠ planck/thk: DEBOUNCE in config.h is overwriting debounce in info.json ⚠ planck/thk: DEVICE_VER in config.h is overwriting usb.device_ver in info.json ⚠ planck/thk: DIODE_DIRECTION in config.h is overwriting diode_direction in info.json ⚠ planck/thk: MANUFACTURER in config.h is overwriting manufacturer in info.json ⚠ planck/thk: PRODUCT_ID in config.h is overwriting usb.pid in info.json ⚠ planck/thk: VENDOR_ID in config.h is overwriting usb.vid in info.json ⚠ planck/thk: QMK_ESC_OUTPUT in config.h is overwriting qmk_lufa_bootloader.esc_output in info.json ⚠ planck/thk: QMK_ESC_INPUT in config.h is overwriting qmk_lufa_bootloader.esc_input in info.json ⚠ planck/thk: QMK_LED in config.h is overwriting qmk_lufa_bootloader.led in info.json ⚠ planck/thk: QMK_SPEAKER in config.h is overwriting qmk_lufa_bootloader.speaker in info.json ⚠ planck/thk: Matrix pins are specified in both info.json and config.h, the config.h values win. ⚠ planck/thk: LAYOUTS in rules.mk is overwriting community_layouts in info.json ⚠ planck/thk: Feature mousekey is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature extrakey is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature console is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature command is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature sleep_led is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature nkro is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature backlight is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature rgblight is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature bluetooth is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature audio is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature encoder is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature dip_switch is specified in both info.json and rules.mk, the rules.mk value wins. ⚠ planck/thk: Feature bootmagic_lite is specified in both info.json and rules.mk, the rules.mk value wins. * error cleanup: primekb/prime_m ☒ primekb/prime_m: Claims to support a community layout that does not exist: ortho_5x6 * error cleanup: rgbkb/sol/rev2 ⚠ rgbkb/sol/rev2: RGBLED_NUM->rgblight.led_count: invalid literal for int() with base 10: '(BACKLIGHT_LEDS + FULLHAND_LEDS)' * error log cleanup: shk9 ☒ shk9: Claims to support a community layout that does not exist: ortho_3x3 * error log cleanup: sowbug ⚠ sowbug/68keys: RGBLED_NUM->rgblight.led_count: invalid literal for int() with base 10: 'DRIVER_LED_TOTAL' ⚠ sowbug/ansi_tkl: RGBLED_NUM->rgblight.led_count: invalid literal for int() with base 10: '(DRIVER_LED_TOTAL)' * error log cleanup: torn ☒ torn: Claims to support a community layout that does not exist: split_3x6_4 * error cleanup: ymdk/np24/u4rgb6 ☒ ymdk/np24/u4rgb6: Claims to support a community layout that does not exist: ortho_4x6 * error cleanup: masterworks/classy_tkl/rev_a ☒ masterworks/classy_tkl/rev_a: Claims to support a community layout that does not exist: tkl_iso_wkl
2021-05-292021 May 29 Breaking Changes Update (#13034)James Young
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-11Remove KEYMAP and LAYOUT_kc (#12160)Zach White
* alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc
2021-05-09Make Swap Hands use PROGMEM (#12284)Drashna Jaelre
This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource.
2021-05-08Resolve a number of warnings in `qmk generate-api` (#12833)Zach White
2021-04-12Change `BOOTMAGIC_ENABLE=yes` to use Bootmagic Lite (#12172)James Young
2021-03-15Add missing info.json files for keyboards (#12239)James Young
Recent changes to QMK Configurator's API have made it so an info.json file is required for QMK Configurator to know how to render the keyboard in question. This PR adds info.json files for keyboards that did not have them, with a few exceptions for boards whose layouts I was unable to determine. * add info.json file for 2key2crawl * add info.json file for 40percentclub/4x4 * add info.json file for 40percentclub/5x5 * add info.json file for 4pplet/aekiso60/rev_a * add info.json file for 4pplet/steezy60/rev_a * add info.json file for 6ball * add info.json file for 7c8/framework * add info.json file for aeboards/constellation * add info.json file for alpine65 * add info.json file for aplyard/aplx6 * add info.json file for arch_36 * add info.json file for arisu * add info.json file for box75 * add info.json file for butterstick * add info.json file for four_banger * add info.json file for geekboards/tester * add info.json file for handwired/2x5keypad * add info.json file for handwired/412_64 * add info.json file for handwired/42 * add info.json file for handwired/aplx2 * add info.json file for handwired/brain * add info.json file for handwired/cans12er * add info.json file for handwired/ck4x4 * add info.json file for handwired/d48 * add info.json file for handwired/dactyl_manuform/dmote/62key * add info.json file for handwired/daishi * add info.json file for handwired/hexon38 * add info.json file for handwired/jot50 * add info.json file for handwired/jotanck * add info.json file for handwired/jotpad16 * add info.json file for handwired/k8split * add info.json file for handwired/myskeeb * add info.json file for handwired/nicekey * add info.json file for handwired/onekey * add info.json file for handwired/postageboard * add info.json file for handwired/riblee_f401 * add info.json file for handwired/riblee_f411 * add info.json file for handwired/rs60 * add info.json file for handwired/splittest * add info.json file for handwired/trackpoint * add info.json file for handwired/traveller * add info.json file for hhkb_lite_2 * add info.json file for honeycomb * add info.json file for ivy/rev1 * add info.json file for keebio/viterbi * add info.json file for laptreus * add info.json file for latin47ble * add info.json file for latin64ble * add info.json file for launchpad/rev1 * add info.json file for lets_split_eh/eh * add info.json file for mechmini/v1 * add info.json file for meira * add info.json file for meishi * add info.json file for merge/iso_macro * add info.json file for mschwingen/modelm * add info.json file for pabile/p20 * add info.json files for pimentoso/paddino02 rev1, rev2/left, and rev2/right * add info.json file for rgbkb/pan * add info.json files for runner3680 3x6, 3x7, 3x8, 4x6, 4x7, 4x8, 5x6, 5x7, and 5x8 * add info.json file for sck/gtm * add info.json file for splitish * add info.json file for standaside * add info.json file for ungodly/launch_pad * add info.json file for xelus/trinityxttkl * Revert "add info.json file for rgbkb/pan" This reverts commit 280b89bc6157023a621a9864f5d74d59d62bb511. * correct maintainer for ivy/rev1
2021-02-09Remove FAUXCLICKY feature (deprecated) (#11829)Drashna Jaelre
2021-02-06Remove legacy print backward compatiblitly (#11805)Joel Challis
* Remove legacy print backward compatiblitly * Remove legacy print backward compatiblitly - core * revert comment changes
2021-02-05Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-02-06Serial refactor (#11521)Ryan
2021-01-30Merge remote-tracking branch 'origin/master' into developZach White
2021-01-30Add a <FEATURE>_SUPPORTED flag (#9058)Zach White
* Initial attempt at allowing keyboards to indicate what features they do not support * try to use a for loop instead * Update disable_features.mk Co-authored-by: Drashna Jaelre <drashna@live.com> * add a few more features * remove my test fixture * disable things that make all:all suggested" Co-authored-by: Zach White <skullydazed@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-01-27Merge remote-tracking branch 'upstream/master' into developfauxpark
2021-01-27Remove `MIDI_ENABLE_STRICT` from keyboards' config.h (#11679)Ryan
2021-01-11Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-01-11Remove `DESCRIPTION`, 0-A (#11369)Ryan
2021-01-07clean up generate-api errorsZach White
2020-12-3040percentclub sixpack support (#11007)Suschman
* QMK support for 40percentclub SixPack * Update readme.md * QMK support for 40percentclub SixPack * fix info.json * Apply suggestions from code review Co-authored-by: Joel Challis <git@zvecr.com> * update PRODUCT name and change BL levels to 6 * Add Fkeys keymap * correct readme * add via keymap * correct readme * change indentation * Apply suggestions from code review Co-authored-by: Ryan <fauxpark@gmail.com> * requested change and more cleanup * Update keyboards/40percentclub/sixpack/sixpack.h Co-authored-by: Erovia <Erovia@users.noreply.github.com> * Apply suggestions from code review Co-authored-by: Suschman <suschman@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2020-12-19VIA Support: MF68 (#11030)MechMerlin
* add via support to mf68 pcb * add license header
2020-12-16Normalise include statements in keyboard code (#11185)Ryan
2020-10-17[Keymap] Drashna Code Cleanup (#10656)Drashna Jaelre
* Add Launchpad keymap Note: RGB and Audio won't work when using B pins for audio * Add support for rgb matrix on launchpad * Update config for launchpag * Disable wait on layer change * Update config for ErgoDox EZ * Fixup rgb light userspace code * Move Corne layout to community layouts folder * Update config for corne to support community layouts * Add license header to files * Minor cleanup of userspace config * Update Pimironi Trackball code * Increase debounce time on ergodox * Fix keymap handling * Enable wait for USB for moonlander * Update/add license headers * fix review issues
2020-10-01[Keymap] VIA Support for Nein Macropad (#10496)thompson-ele
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-09-21[Keymap] Add delivrance's keymap for 40percentclub/mf68 (#10294)Dan
2020-09-01[Keymap] add 40percentclub/mf68:andyjack (#10208)Andy Jack
* Initial checkin of my 40percentclub/mf68 keymap * Add gplv2 license header
2020-07-27Remove HD44780 References, Part 1 (#9052)James Young
* remove HD44780_ENABLE rules: 0-9, A-B * remove HD44780_ENABLE config: 0-9, A-B
2020-06-24[Keymap] Add pierrec83's gherkin keymap (#9465)Pierre Chevalier
* [Keymap] Add pierrec83's gherkin keymap Contribute my gherkin keymap upstream as it is semi-stable. It has grown in symbiosis with my Kyria keymap which is already upstream. Add a readme * Remove generated keymap and instructions to generate it as it is done by qmk flash
2020-05-19Gherkin 26, 27, 28, 30 keys compatibility (#9136)Stefano
* Gherkin 26, 27, 28, 30 compatibility * Update readme.md Co-authored-by: stevexyz <warste@removethisandleavegoogle.com>
2020-04-30QMK-ify some GPIO macros (#8315)Ryan
2020-04-27[Keymap] Gherkin SuperMicro 28 (#8886)Stefano
* Gherkin SuperMicro 28 * Update keyboards/40percentclub/gherkin/keymaps/stevexyz/keymap.c * Update keyboards/40percentclub/gherkin/keymaps/stevexyz/keymap.c * Update keyboards/40percentclub/gherkin/keymaps/stevexyz/keymap.c * Update keyboards/40percentclub/gherkin/keymaps/stevexyz/config.h * Update keyboards/40percentclub/gherkin/keymaps/stevexyz/rules.mk * Update keyboards/40percentclub/gherkin/keymaps/stevexyz/rules.mk * removed jpegs * removed jpegs * Update keyboards/40percentclub/gherkin/keymaps/stevexyz/keymap.c * Update keyboards/40percentclub/gherkin/keymaps/stevexyz/rules.mk * removed firmware sizes * Update keyboards/40percentclub/gherkin/keymaps/stevexyz/keymap.c * Update keyboards/40percentclub/gherkin/keymaps/stevexyz/rules.mk * Update keymap.c
2020-03-31[Keymap] Drashna's Cleanup and RGB Divide (#8506)Drashna Jaelre
* Enable External EEPROM on Planck Rev6 * Update KC_MAKE macro to use qmk cli util * Disable additional gradients for rgb matrix * Update analog code for newer methods * Update ergodox layout * Disable Grave Escape * Cleanup OLED code a bit * Remove old unicode code * Seperate RGB Matrix code from RGB Light code in userspace * Massive overhaul an generalization of personal OLED code Now lets hope I NEVER get a keyboard using a 128x32 in a normal orientation. * Super tiny cleanup * Enable Diablo layer on kyria * clang format pass * Additional OLED cleanup
2020-02-17Conform Gherkin defaults to original TMK keymap (#8186)Mike Tsao
* Conform defaults to original TMK keymap * fix swapped PGUP/PGDN (thanks noroadsleft) * Another typo
2020-02-14Adding VIA support for 40percentclub/luddite (#8158)morbetter
* Adding VIA support for 40percentclub/luddite * Update config.h * Update rules.mk * Delete config.h config.h was created to override the "default" of RGBLED_NUM 8 deleting the file to keep with defaults * Removing block and comment as suggested * Update PRODUCT_ID Changing from: #define PRODUCT_ID 0x0A0C To: #define PRODUCT_ID 0x4C55 // "LU" * Changing Vendor ID Changing Vendor ID from: #define VENDOR_ID 0xFEED To: #define VENDOR_ID 0x3430 // "40"