summaryrefslogtreecommitdiff
path: root/docs
AgeCommit message (Collapse)Author
2021-08-24adding uf2 flash support for blackpill 401 (#13968)Path Nirvana
* adding uf2 flash support for blackpill 401 * forgot to add blackpill to keyboard header file * making changes requested by drashna * fixing tzarc s comments * removing the keyboard * undo the change to dactyl_manuform.h
2021-08-22Make solo half of split keyboards (more) usable. (#13523)Joakim Tufvegren
* Make solo half of split keyboards (more) usable. Using only one half of a split keyboard (that's using the split_common framework to communicate) is not a great experience, since several read timeouts per scan cycle cause an unusably slow scan rate. This change blocks all split communication attempts for 500 ms (configurable) after an error occurs, causing the scan rate to become at least _more_ usable, but might need some tweaking to work fully on most keyboards. One read timeout still needs to occur after the 500 ms has passed, and if that timeout isn't low enough, some scan cycles may still be too slow. * Fix lint complaint. * Require 25 consecutive comm errors to see comms as disconnected. The number of max errors can be overridden by defining `SPLIT_MAX_CONNECTION_ERRORS`. * Add comments to new defines, and ability to disable disconnection check. Also increase `SPLIT_MAX_CONNECTION_ERRORS` to 40, since it's divisible by most relevant numbers for the description. * Make lint happy ...again * Only update `connection_check_timer` when needed. * Add new defines to split keyboard documentation. * Move connection timeout logic to transport.c, add `is_transport_connected`. * Use split_common disconnection logic in matrix.c. Instead of doing more or less the same thing twice. * Move disconnection logic to `transport_master`. Is a cleaner implementation, and causes the scan rate while disconnected to increase instead of decrease. * Lint fixes. * Lower default `SERIAL_USART_TIMEOUT` to 20 ms. The read timeout must be low enough to not cause exessively long scan cycles when using a solo split half. 10 ms was determined from testing to work fine even with the slowest defined baudrate of 19200 (5 ms was too low for that case), so 20 ms should be fine for most cases. * Remove `SERIAL_USART_TIMEOUT` from ergodox_infinity/config.h Was somewhat mistakenly included in an earlier PR. * Fix building with `USE_I2C`. * Reduce built firmware size. Not really sure why this works, the idea was taken from tzarc's work on split disconnection. * Tweak and improve opt-out for split disconnection logic. There are now two ways to opt out from this feature: * Set `SPLIT_MAX_CONNECTION_ERRORS` to 0. This will completely disable the connection status checks (also affects the slave matrix reset logic in matrix.c, though). * Set `SPLIT_CONNECTION_CHECK_TIMEOUT` to 0. This will only disable the communication throttling while disconnected. Will make the firmware smaller. * Make split disconnection logic work with custom transports. Includes a fallback implementation for keyboards using a custom split_util.c but not a custom matrix.c (currently no such keyboard seems to be merged, though). * Remove unnecessary include of timer.h Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joel Challis <git@zvecr.com>
2021-08-20Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-08-20[Core] [Docs] Remove travis-ci references (#13916)Spaceman
2021-08-19Added right vs left specific pin assignments for dip switch (#13074)XScorpion2
* Added right vs left specific pin assignments for dip switch * Update feature_dip_switch.md * Ran formatting tools
2021-08-18Allow for removal of hysteresis on 4x encoders (#13698)tucvbif
* Remove hysteresis on 4x encoders Sometimes, controller skips encoder pulses and when it returns to default position, the encoder_pulses variable isn't equals 0. And when I turn encoder in opposite direciton, it skips first click becase of encoder_pulses crosses zero. To prevent this, I add the ENCODER_DEFAULT_POS constant, and reset encoder_pulses into 0 when the state variable equals ENCODER_DEFAULT_POS. * Documentation for ENCODER_DEFAULT_POS
2021-08-18Add a toggle key for GUI On/Off in Magic feature (#13830)Drashna Jaelre
2021-08-18`--parallel` improvements (#13800)ruro
* improve make parallel jobs support * document the --parallel option * disable the output-sync for interactive targets
2021-08-18Digitizer HID interface : absolute coordinates for mouse cursor (#12851)a-chol
* Add digitizer HID interface for setting the mouse cursor position at absolute screen coordinates. Tested on Pro Micro, Proton C and Blackpill. * Update docs/feature_digitizer.md Co-authored-by: Ryan <fauxpark@gmail.com> * Update tmk_core/protocol/usb_descriptor.c Co-authored-by: Ryan <fauxpark@gmail.com> * Add missing copyrights Add V-USB support * Add support for digitizer dedicated endpoint for lufa and chibios. Fix formatting issues Move digitizer_task definition to the feature's base implementation file * Run cformat on modified files * Change digitizer report usage to Digitizer instead of Pen to avoid pointer disappearing on Windows. * Update tmk_core/protocol/vusb/vusb.c Co-authored-by: Ryan <fauxpark@gmail.com> * Run cformat from docker image * Remove send_digitizer from host_driver_t and instead rely on the declaration being the interface to the implementation in each HW-specific usb implementation. * Fix build : send_digitizer shouldn't be static in vusb and add weak-linkage implementation for tests without usb implementation * Change digitizer user interface to match pointing device's * Update documentation with new API Co-authored-by: a-chol <nothing@none.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2021-08-18Steno combinedkeys (#12538)freqmod
* Add support for steno keys that press adjacent keys simultaniously * Add some docs for steno combined keys
2021-08-18Rgb matrix/enable modes explicitly (#13758)Drashna Jaelre
* Change animations to require explicet activation * Add support for legacy config * Make default for now * Add LED Matrix support * change LED Matrix docs
2021-08-17Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-08-18update feature_tap_dance.md translation (#13496)s-show
* update feature_tap_dance.md translation * Update docs/ja/feature_tap_dance.md Co-authored-by: shela <shelaf@users.noreply.github.com> * update based on comment. Co-authored-by: shela <shelaf@users.noreply.github.com>
2021-08-15Fixup Audio startup and add to documents (#13606)Drashna Jaelre
* Fixup Audio startup and add to documents * fix doc descriptions
2021-08-15Enable sync of OLED/ST7565 display on/off state on Splits (#13542)Drashna Jaelre
* Enable sync of OLED/ST7565 display on/off state on Splits * Only send if states are not matched Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-08-14[Keyboard] ez_maker/directpins for easy one-offs in qmk_configurator (#13321)Zach White
* new keyboard: handwired/directpins * fix promicro keyboard_name * add teensy2 and teensy2++ support * align with handwired/onekey * tweak pids * add teensy 3.2 and teensy lc to directpins * move directpins from handwired to ez_maker * add docs for easy maker
2021-08-14Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-08-15Rework keymap_extras docs (#13949)Ryan
2021-08-12Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-08-13Update 20210529.md (#13170)Felix Sargent
This was confusing to me when I updated, so I want to make it more clear for those that come after.
2021-08-12Fix some additional bootmagic settings (#13979)Drashna Jaelre
2021-08-10Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-08-10Architecture documentation for Configurator and API (#13935)Zach White
* Architecture documentation for the configurator and api * Apply suggestions from code review Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2021-08-10Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-08-10Update feature_wpm.md (#13936)Stefan Subich
Fix example markdown code formatting
2021-08-09Remove backwards compatibility of debounce names (#13877)Joel Challis
* Remove backwards compatibility of debounce names * Update docs * Update keyboards/keymaps
2021-08-09Add support for STM32F407x MCUs. (#13718)thpoll83
* Add support for STM32F407x MCUs. * Removing STMF407 MCU variation * Update quantum/mcu_selection.mk Remove options for dfu flashing Co-authored-by: Ryan <fauxpark@gmail.com> * DISABLE STM32_USB_USE_OTG1 * Update platforms/chibios/GENERIC_STM32_F407XE/configs/mcuconf.h Co-authored-by: Drashna Jaelre <drashna@live.com> * Update platforms/chibios/GENERIC_STM32_F407XE/configs/mcuconf.h Co-authored-by: thomas.pollak <thomas.pollak@dynatrace.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-08-06Remove Full Bootmagic (#13846)James Young
* disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + ``` * update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta
2021-08-07Add HOLD_ON_OTHER_KEY_PRESS option for dual-role keys (#9404)Sergey Vlasov
* Add HOLD_ON_OTHER_KEY_PRESS option for dual-role keys Implement an additional option for dual-role keys which converts the dual-role key press into a hold action immediately when another key is pressed (this is different from the existing PERMISSIVE_HOLD option, which selects the hold action when another key is tapped (pressed and then released) while the dual-role key is pressed). The Mod-Tap keys already behave in a similar way, unless the IGNORE_MOD_TAP_INTERRUPT option is enabled (but with some additional delays); the added option makes this behavior available for all other kinds of dual-role keys. * [Docs] Update tap-hold docs for HOLD_ON_OTHER_KEY_PRESS Document the newly added HOLD_ON_OTHER_KEY_PRESS option and update the documentation for closely related options (PERMISSIVE_HOLD and IGNORE_MOD_TAP_INTERRUPT). Use Layer Tap instead of Mod Tap in examples for PERMISSIVE_HOLD and HOLD_ON_OTHER_KEY_PRESS, because the effect of using these options with Mod Tap keys is mostly invisible without IGNORE_MOD_TAP_INTERRUPT. Add comments before return statements in sample implementations of `get_ignore_mod_tap_interrupt()`, `get_hold_on_other_key_press()` and `get_permissive_hold()`. Thanks to @Erovia and @precondition for comments and suggestions to improve the documentation.
2021-08-06Process combos earlier & overlapping combos (#8591)Pete Sevander
* Combo processing improvements. Now it is possible to use ModTap and LayerTap keys as part of combos. Overlapping combos also don't trigger all the combos, just exactly the one that you press. New settings: - COMBO_MUST_HOLD_MODS - COMBO_MOD_TERM - COMBO_TERM_PER_COMBO - COMBO_MUST_HOLD_PER_COMBO - COMBO_STRICT_TIMER - COMBO_NO_TIMER * Remove the size flags from combo_t struct boolean members. This in the end actually saves space as the members are accessed so many times. The amount of operations needed to access the bits uses more memory than setting the size saves. * Fix `process_combo_key_release` not called correctly with tap-only combos * Fix not passing a pointer when NO_ACTION_TAPPING is defined. * Docs for `COMBO_ONLY_FROM_LAYER` * Update docs/feature_combo.md Co-authored-by: precondition <57645186+precondition@users.noreply.github.com> * Update quantum/process_keycode/process_combo.c Co-authored-by: precondition <57645186+precondition@users.noreply.github.com> * Add `EXTRA_SHORT_COMBOS` option. Stuff combo's `disabled` and `active` flags into `state`. Possibly can save some space. * Add more examples and clarify things with dict management system. - Simple examples now has a combo that has modifiers included. - The slightly more advanced examples now are actually more advanced instead of just `tap_code16(<modded-keycode>)`. - Added a note that `COMBO_ACTION`s are not needed anymore as you can just use custom keycodes. - Added a note that the `g/keymap_combo.h` macros use the `process_combo_event` function and that it is not usable in one's keymap afterwards. * Update docs/feature_combo.md Co-authored-by: precondition <57645186+precondition@users.noreply.github.com> * Update docs/feature_combo.md Co-authored-by: precondition <57645186+precondition@users.noreply.github.com> * Update docs/feature_combo.md Co-authored-by: precondition <57645186+precondition@users.noreply.github.com> * Update docs/feature_combo.md Co-authored-by: precondition <57645186+precondition@users.noreply.github.com> * Update docs/feature_combo.md Co-authored-by: precondition <57645186+precondition@users.noreply.github.com> * Change "the" combo action example to "email" example. * Update docs/feature_combo.md Co-authored-by: precondition <57645186+precondition@users.noreply.github.com> * Fix sneaky infinite loop with `combo_disable()` No need to call `dump_key_buffer` when disabling combos because the buffer is either being dumped if a combo-key was pressed, or the buffer is empty if a non-combo-key is pressed. * Update docs/feature_combo.md Co-authored-by: precondition <57645186+precondition@users.noreply.github.com> * Update docs/feature_combo.md Co-authored-by: precondition <57645186+precondition@users.noreply.github.com> Co-authored-by: precondition <57645186+precondition@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-08-06[Feature] Swap buttons on PS2 Mouse/Trackball (#9205)Juan Pablo Kutianski
* [Feature Request] Swap buttons on PS2 Mouse/Trackball * [Feature Request] Swap buttons on PS2 Mouse/Trackball * Added id: to the doc * Missing space * Solve comment https://github.com/qmk/qmk_firmware/pull/9205#discussion_r430783182 * Solve comments https://github.com/qmk/qmk_firmware/pull/9205#discussion_r430783182 & https://github.com/qmk/qmk_firmware/pull/9205#discussion_r430783884 * Format code more according to https://docs.qmk.fm/#/coding_conventions_c * change logic to LUT * WIP: Clean up * WIP: Solution with xor operators to mask the change * delete #endif & added the missed xor operator (ahhh) * Variable (mouse_report->buttons): avoid setting twice https://github.com/qmk/qmk_firmware/pull/9205#discussion_r430783884 * Update tmk_core/protocol/ps2_mouse.c Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: juank <juank@fktech.net> Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-08-06Arm ps2 mouse interrupt (#6490)JohSchneider
* ps2_mouse on ARM: an interrupt-version of the ps2-mouse code ported to ARM/chibios * ps2_mouse on ARM: link EXT callback-channel selection to the user defined PS2_LINE_CLOCK * ps2_mouse on ARM: replace DELAY_X defines with hardware-agnostic wait_X * ps2_mouse on ARM: replace chibios-specific defines for the pins/lines with defines from quantum/config_common.h and drop the '_LINE' component from teh define name * ps2_mouse on ARM: expose the software-intterupt port as a user editable define * Update docs/feature_ps2_mouse.md Co-Authored-By: Hugo van Kemenade <hugovk@users.noreply.github.com> * Update feature_ps2_mouse.md * use a define to deduce the PS_DATA_PORT instead * reduce all-zero extcfg to oneliner * ps2_mouse: use generic wait instead of avr-delay * Update docs/feature_ps2_mouse.md * ps2_mouse: changes for new chibios version (17.6.0 -> 19.1.0) replacing the legacy externa-interrupt driver with pal-callbacks * ps2_mouse: use PLATFORM_KEY Co-Authored-By: Joel Challis <git@zvecr.com> * ps2_mouse: clang-format corrections * ps2_mouse: add systemlocks using the chibios equivalent to AVRs cli: chSys[Unl|L]ock Co-authored-by: Johannes <you@example.com> Co-authored-by: Hugo van Kemenade <hugovk@users.noreply.github.com> Co-authored-by: Joel Challis <git@zvecr.com>
2021-08-04Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-08-04Updated settings.json file to fit VSC's docs (#13829)Changsu Park
This change fixes the warning caused by deprecated way of configuring terminal profiles. The warning caused by old settings.json is the following: This is deprecated, the new recommended way to configure your default shell is by creating a terminal profile in `#terminal.integrated.profiles.windows#` and setting its profile name as the default in `#terminal.integrated.defaultProfile.windows#`. This will currently take priority over the new profiles settings but that will change in the future. Refer to the link below for more information: https://code.visualstudio.com/docs/editor/integrated-terminal#_configuration
2021-08-03Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-08-02[Docs] Remove extra word it bootmagic page (#13855)plarso
2021-07-31__flash? (#13799)Joel Challis
2021-07-31Move some led drivers to common folder (#13749)Joel Challis
* Move some led drivers to common folder
2021-07-30Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-07-31Explicitly state that VIA should not be enabled in the default keymap. (#13803)Nick Brassel
2021-07-30Port new_keyboard.sh to CLI (#13706)Ryan
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2021-07-30Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-07-30`qmk docs`: Add flag to open in browser (#13788)Ryan
* `qmk docs`: Add flag to open in browser * Add docs
2021-07-29Merge remote-tracking branch 'upstream/master' into developJames Young
2021-07-29[Docs] Added information on soldering diodes in parallel (#13117)officereso
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-07-29Remove references to info.json `width` and `height` in CLI (#13728)Ryan
2021-07-28Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-07-28matrix_scan_x -> x_task (#13748)Joel Challis
2021-07-28fix: Fix typo in documentation for one shot keys. ON_TOGG -> OS_TOGG (#13754)Shane Celis
`ON_TOGG` doesn't exist in the codebase.
2021-07-27Merge remote-tracking branch 'origin/master' into developQMK Bot