Age | Commit message (Collapse) | Author |
|
* feat: tentative fix for keyboard crash during esd testing
* feat: adds support for the GD32 voyager
* feat: adds voyager's dfu suffix
* fix: instability issues over i2c
* fix: more robust right side scan
* fix: tentative delay after init
* Revert "fix: tentative delay after init"
This reverts commit b0a6461cf1cef60574eac1647fd14e1fe63a020c.
* fix: scan left side in between right scan process
* fix: resets matrix + layer state when reconnecting the right side
* chore: comments and code cleanup
* fix: restore previous control flow
* fix: decouple led driver reinit from io expander reinit
* feat: reinit led drivers independtly
* fix: prevents slamming the led driver over i2c
* Revert "fix: prevents slamming the led driver over i2c"
This reverts commit 48b8c809ea7a99ad2c3e941b83313787985c95e0.
* Revert "feat: reinit led drivers independtly"
This reverts commit 6405e6b3673478af1d98244c4df6ab73b95b18e1.
* fix: reboot on io expander
* fix: wait time after reading the io expander
* chore: code cleanup and some refactors.
* feat: adds led brightness and status led control over hid
* fix: remove stray printf
* fix: compilation error on ergodox
* fix: gd32 eeprom fix
* fix: caps lock crash
* fix: soft reset to bootloader key.
* chore: move the app address define where it should be
* fix: cleanup + debounce default
* feat: tentatively set gd32 clock to 98Mhz
* feat: realign to latest chibios contrib
* chore: points to ZSA's chibios contrib fork
---------
Co-authored-by: Florian Didron <0x6664@hey.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* Tentative Teensy 3.5 support
* Set firmware format to .hex for ARM Teensys
* Got to "device descriptor failed" by comparing with Teensy 3.6 code
* Drop down to 96MHz...
* Bump back up to 120MHz
|
|
* Disable RESET keycode because of naming conflicts
* Add Pico SDK as submodule
* Add RP2040 build support to QMK
* Adjust USB endpoint structs for RP2040
* Add RP2040 bootloader and double-tap reset routine
* Add generic and pro micro RP2040 boards
* Add RP2040 onekey keyboard
* Add WS2812 PIO DMA enabled driver and documentation
Supports regular and open-drain output configuration. RP2040 GPIOs are
sadly not 5V tolerant, so this is a bit use-less or needs extra hardware
or you take the risk to fry your hardware.
* Adjust SIO Driver for RP2040
* Adjust I2C Driver for RP2040
* Adjust SPI Driver for RP2040
* Add PIO serial driver and documentation
* Add general RP2040 documentation
* Apply suggestions from code review
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Nick Brassel <nick@tzarc.org>
|
|
* Refactor steno into STENO_ENABLE_[ALL|GEMINI|BOLT]
* Update stenography documentation
* STENO_ENABLE_TXBOLT → STENO_ENABLE_BOLT
TXBOLT is a better name but BOLT is more consistent with the
pre-existing TX Bolt related constants, which all drop the "TX " prefix
* Comments
* STENO_ENABLE_[GEMINI|BOLT|ALL] → STENO_PROTOCOL = [geminipr|txbolt|all]
* Add note on lacking V-USB support
* Clear chord at the end of the switch(mode){send_steno_chord} block
* Return true if NOEVENT
* update_chord_xxx → add_xxx_key_to_chord
* Enable the defines for all the protocols if STENO_PROTOCOL = all
* Mention how to use `steno_set_mode`
* Set the default steno protocol to "all"
This is done so that existing keymaps invoking `steno_set_mode` don't
all suddenly break
* Add data driver equivalents for stenography feature
* Document format of serial steno packets
(Thanks dnaq)
* Add missing comma
|
|
|
|
|
|
Validating using AJV
|
|
|
|
|
|
|
|
|
|
Co-authored-by: precondition <57645186+precondition@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
|
|
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
|
|
|
|
|
|
* Add frameworking for development board presets
* Update lib/python/qmk/info.py
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Nick Brassel <nick@tzarc.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* CLI: Parse USB device version BCD
* Apply suggestions
|
|
* Refactor `bootloader_jump()` implementations
* Fix tests?
* Rename `atmel-samba` to `md-boot`
|
|
|
|
* Added support for WB32 MCU
* Modified eeprom_wb32.c
* Remove the eeprom_wb32-related code
|
|
* macros in json keymaps
* add advanced macro support to json
* add a note about escaping macro strings
* add simple examples
* format json
* add support for language specific keymap extras
* switch to dictionaries instead of inline text for macros
* use SS_TAP on the innermost tap keycode
* add the new macro format to the schema
* document the macro limit
* add the json keyword for syntax highlighting
* fix format that vscode screwed up
* Update feature_macros.md
* add tests for macros
* change ding to beep
* add json support for SENDSTRING_BELL
* update doc based on feedback from sigprof
* document host_layout
* remove unused var
* improve carriage return handling
* support tab characters as well
* Update docs/feature_macros.md
Co-authored-by: Nick Brassel <nick@tzarc.org>
* escape backslash characters
* format
* flake8
* Update quantum/quantum_keycodes.h
Co-authored-by: Nick Brassel <nick@tzarc.org>
|
|
* Add support for RISC-V builds and GD32VF103 MCU
* Add toolchain selection in chibios.mk based on the mcu selected in
mcu_selection.mk
* Reorder and added comments to chibios.mk to have a streamlined makefile
* Add GD32VF103 mcu to possible targets for QMK.
* Add STM32 compatibility for GD32VF103 MCU, this is hacky but more efficent
then rewriting every driver.
* Add GigaDevice DFU bootloader as flash target, please note that
dfu-util of at least version 0.10 is needed.
* Add analog driver compatibility
* Add apa102 bitbang driver compatibility
* Add ws2812 bitbang driver compatibility
* Add eeprom in flash emulation compatibility
* Allow faster re-builds with ccache
* Add SiPeed Longan Nano to platform files
* Add SiPeed Longan Nano Onekeys
* Make quine compatible with other bootloaders
* Support builds with picolibc
* Add risc-v toolchain to arch and debian/ubuntu scripts
|
|
|
|
* Initial pass of F405 support
* remove some conf files
* docs
* clang
|
|
|
|
|
|
* add some split data to info.json
* add tags
* add half of config_options.md to info.json
* add support for designating master split
* sort out split transport and primary
* fix bad data in UNUSED_PINS
* fixup custom transport
* wip
* allow for setting split right half keyboard matrix
* add SPLIT_USB_DETECT
* minor cleanup
* fix an erroneous message
* rework split.usb_detect
* adding missing rgblight vars to info.json
* add mouse_key to info.json
* add all remaining options from docs/config_options.md
* fix audio voices
* qmk info: Change text output to use dotted notation
* tweak layout output
* resolve alias names
* break out some functions to make flake8 happy
* add a field for bootloader instructions
* qmk generate-info-json: add a write-to-file argument
Adds an argument that instructs qmk generate-info-json to write the output to a file instead of just to the terminal.
* -arg_only, +action
Because it was never my intention that one would have to specify a value for the argument that enables writing the file.
* Bring qmk generate-info-json inline with other generate commands
* pytest fixup
* fix esca/getawayvan
* fix data driven errors for bpiphany converters
* features.force_nkro -> usb.force_nkro
* split.primary->split.main
* fix esca/getawayvan_f042
* fix the bpiphany converters for real
* fix bpiphany/tiger_lily
* Apply suggestions from code review
Co-authored-by: Nick Brassel <nick@tzarc.org>
* fix generate-api errors
* fix matrix pin extraction for split boards
* fix ploopyco/trackball_nano/rev1_001
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
|
|
* Add support for STM32F407x MCUs.
* Removing STMF407 MCU variation
* Update quantum/mcu_selection.mk
Remove options for dfu flashing
Co-authored-by: Ryan <fauxpark@gmail.com>
* DISABLE STM32_USB_USE_OTG1
* Update platforms/chibios/GENERIC_STM32_F407XE/configs/mcuconf.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update platforms/chibios/GENERIC_STM32_F407XE/configs/mcuconf.h
Co-authored-by: thomas.pollak <thomas.pollak@dynatrace.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
|
|
|
|
Co-authored-by: Ryan <fauxpark@gmail.com>
|
|
* Adds support for STM32L412xB, STM32L422xB.
* Add to list of supported MCUs.
* Disable SPI1 by default.
|
|
* fix some broken info.json files
* optimize our jsonschema using refs
* fix formatting after vscode broke it
* make flake8 happy
* cleanup
* make our schema validation more compact and flexible
|
|
fixes https://github.com/qmk/qmk_firmware/issues/13052
|
|
* initial L433 commit
* change to XC
* fix L433
* disable all peripherals
* update system and peripheral clocks
* 433 change
* use its own board files
* revert its own board files
* l433 specific change
* fix stm32l432xx define
* remove duplicate #define
* fix bootloader jump
* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h
* move to L443
* move to L443
* fix sdmmc in mcuconf.h
* include STM32L443
* add L443
* Include L443 in compatible microcontrollers
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Include L443 in compatible microcontrollers
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Update config bootloader jump description
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Update ChibiOS define reasoning
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Update quantum/mcu_selection.mk
Co-authored-by: Nick Brassel <nick@tzarc.org>
* fix git conflict
Co-authored-by: Nick Brassel <nick@tzarc.org>
|
|
* Add support for MCU = STM32F446
* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64
* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.
Co-authored-by: Nick Brassel <nick@tzarc.org>
|
|
(#12600)
* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.
* Update flashing.md
* Update chconf.h
* Update config.h
* Update halconf.h
* Update mcuconf.h
|