| Age | Commit message (Collapse) | Author |
|---|
|
* Helix: make rgblight modes selectable.
No change in build result.
* edit the comment of helix/rev2/keymaps/default/keymap.c
* Helix led_test keymap: reduced the size.
|
|
Update inline funnction to static inline function.
Fixed error of if enabe ADJUST_MACRO_ENABLE.
|
|
|
|
|
|
Adds support for CTRL keyboards to enter bootloader via bootloader_jump()
|
|
* Add Link Time Optimization to reduce firmware size
* Disable Mousekeys on Hadron to save room
|
|
|
|
* Disable Leader to reduce firmware size for Travis
* Additionaly fixes to USB_USB\BLE Keyboard converter
* Disable One Shots to get USB to USB BLE converter to fit
|
|
Auto Shift (#3973)
* Update for SEND_STRING usage
Update for SEND_STRING usage.
Sending keyboard reports (kbd, nkro) now obey the minimum polling time.
While attempting to send a keyboard report and waiting for a USB poll, other functions of the keyboard, including LED effects and power management, will continue to operate at their intended intervals.
* Updates for send string, syscalls, stdio, debug prints, auto shift
Now properly waiting for previous keys sent over USB to complete before sending new.
Added heap to linker and now compiling with syscalls support.
Removed custom string functions and now using stdio.
dprintf now works as intended through virtser device.
* CTRL and ALT keymap updates
CTRL mac keymap updated
ALT default and mac keymap updated
ALT rules.mk added Auto Shift with default no
* Code cleanup as per discussion with vomindoraan
Code cleanup as per discussion with vomindoraan
|
|
* add st-link_cli support
* format names
|
|
Specifically, an "L" got appended to the controller names for te "valid types",
but did not get appended to the blocks that include the specific drives.
So, this breaks anything that isn't "Yes".
|
|
Also worked around my busted dipswitch 2...
|
|
Because leaving review comments on a PR that's already been merged doesn't make any sense.
|
|
|
|
* Update quantum matrix to support both AVR and Chibios ARM
- Addition of STM32 pin definitions
- Created abstruction layer defines to control GPIO (This is a bit pointless for Chibios as we are creating a PAL ontop of a PAL but it is necessary for uniformity with AVR)
- Modified matrix.c to use the above functions
* minor ifdef fix
* Rename of functions and docs
- Added documentation.
- Renamed functions according to Jack's spec.
* Massdrop fix
* Update matrix.c
* Update quantum.h
* Update quantum.h
* Update quantum.h
* Update internals_gpio_control.md
|
|
* Overhaul to Userspace Documentation
* Formatting issues
* Additionaly formatting fixes
* Add Readme info
* Additionaly Readme info
* Formatting fixes
|
|
* Add pragma once info to contributing guidelines
* Fix links in readme template to match doc site
* Revert changes to contributing doc as somebody already changed it
|
|
|
|
|
|
|
|
|
|
|
|
* Improved dynamic keymaps
* K&R sucks
|
|
* model01: implement RGB matrix feature
LEDs can still be individually controlled if this is switched off.
* model01: use fast banked LED setting commands
* model01: update default keymap to use RGB matrix
* model01: update RGB matrix support to match common_features.mk
* rgb_matrix: include <string.h>
This was missing after commit 4d5705ea6ceeb11cd2adc018644ec87c51af4e86
which introduces a use of memset().
* model01: make g_rgb_leds weak
This allows users to override which LEDs are configured as
modifiers, or tweak the x/y coordinates, should they so choose.
|
|
|
|
This reverts commit 3eabd7946ec5e47d12d603d591e8d8658d82fa42.
|
|
* add 'mavrdude' target into tmk_core/avr.mk
I made it a little convenient when writing the same binary to multiple Pro Micro.
* rename target name 'mavrdude' to 'avrdude-loop'
* modify docs/flashing.md about avrdude-loop
* mdify docs/flashing.md again
* modifi docs/flashing.md 3rd
|
|
Rather than a define, but read from the define. This way, a smart coder could externally configure the randomness, changing it on the fly
This is also a precursor step to adding full on support for configurable randomness.
|
|
controlled by dip 3 with pitch modulated by the knob
|
|
* arrangement Underglow
* modified serial function references from helix
* Remove defines (ws2812_*REG)
|
|
* Treat too-large firmwares as an error, not a warning
* switch the order of printing
* I think I have it
* adjust the formatting some more
|
|
|
|
* Initial commit of RAMA U80-A
* Initial commit of RAMA U80-A
* Moved IS31FL3736 driver, minor cleanups
* Superficial stuff
* Review changes
* Refactored to use common code.
|
|
* rgb_matrix: use a driver ops struct
This is intended to avoid #ifdef proliferation on adding more drivers,
eg. model01, which use different architectures.
* rgb_matrix: document driver struct members
* rgb_matrix: remove unused LED testing code
* rgb_matrix: don't build into IS31x drivers unless being used
* rgb_matrix: refactor make config options
This ensures that the necessary files are included for any custom
RGB_MATRIX_ENABLE value, without having to add entries here for specific
boards. This particularly affects model01 because its controller is
integrated and won't be used anywhere else, so it's preferable not to
put it in common_features.mk.
This now validates the value of RGB_MATRIX_ENABLE.
It was necessary to fix an error in ergodox_ez rules.mk using the wrong
comment separator, yielding an invalid value.
* IS31x drivers: don't write the control registers all the time
This is only needed when they are changed. This is done in init() and
board- or keymap-specific code is free to make further changes.
* rgb_matrix: move structs from chip drivers to rgb_matrix_drivers.c
This approach is specific to the rgb_matrix functionality, so keep it
neatly separated from the raw chip drivers.
|
|
* port macropad over to qmk
* add bootloader size
|
|
This corrects the matrix macro reference for both of the keymap.c files in layouts/default.
|
|
|
|
* holefully correct error in mtdjr userspace for layer_state_set_user
* return state and wrap rgb actions in their own conditional
* mtdjr nyquist and userspace updates
* mtdjr updates as requested
|
|
* pull out toad keyboard and get it compiling
* refactor xmmx
* use the correct LAYOUT macros
* move LED code out to toad.c file
* move LED code out to xmmx.c file
* adjust for correct number of columns and pins used
* remove led set user
|
|
|
|
* Rename constexpr keymap folder to konstantin
* Replace numpad comma with Unicode comma
* Rename tap dance constants
* Move record->event.pressed check into switch
* Use RShift as a dedicated Fn key
|
|
* Keymap: Add Koba's keymap for Ergo42.
* Fix: Remove unnecessary #define.
* Fix: Rename readme files to lowercase.
|
|
* version 1
* version 1.1
* version 1.2
|
|
|
|
(#3979)
* initial commit
* Update readme.md
* Update keymap.c
added comment for description of function to control LED as layer indicator
* corrected formatting as requested.
* format for configurator
* corrected info.json to propertly reflect layout in Configurator
* updated layouts to reflect physical keyboard
* comment out BACKLIGHT BREATHING in config.h
|
|
* 4x4 - pro micro version
* pro-micro setup on 4x4
* tap dance LCTL/RESET key
* remove test file
* more research
* revert a couple un-intended edits
* opt_defs version of adding custom rules.mk variables
* cleanup
* cleanup
* cleanup
* cleanup
* layout edits
* layout edits
* keymap edit
* numpad layout change
* got tap dance layer-switch working
* keymap changes
* temporary revert
* restore previous settings
* misc fixes
* layer order change
* fix layout matrix
* Update tapdances.c
|
|
* deleting arkag branch, forcibly moving changes over to master
* fade_color function added, not tested
* added half functions some stuff
* surround_type function implemented and working.
* added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes
* added a fade state machine and functionality
* build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout
* changes to sleep breath function, changed how I will switch to HALMAK
* support for halmak added
* support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid
* changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler.
* reformatted some if statements in state detection
* changes to force fade to pause on boot, or plug in.
* Attempting to move over to userspace, pushing to repository for help
* userspace stuff....
* userspace stuff....
* layout changes, working userspace,
Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY
* Layout change
Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers.
* Removed excessive tabs in files
* Moved mods on homerow around...
* changes recommended by @drashna
* removed homerow mods, more flashy lighting!
* changed delays for lighting.
* velocikey code retro fit into userspace to match typing speed
currently "working" but isn't as reactive as I want.
* Readme and other documentation hidden throughout code
* Added a pretty picture
* pretty picture actually added
* More readme updates
* Velocikey now working inside my userspace!
* Changed repo macro and fixed readme
* Removed media layer, moved media control to LAZY layer
* fixed more merge issues when I had to merge...
|
|
* added mehkee96 support -JT
* making requested changes -JT
* fixes -jt
* fixed info.json -JT
* tidy up info.json comments from noroadsleft -JT
|
|
* create: biacco jis keymap for windows for Ergo42
* fix: biacco-winjp: change #ifndef to #pragma once.
* fix: following: 3935#pullrequestreview-157941685
|
|
* Pin avr-gcc in shell.nix pending release of 8.3.0
There's apparently a critical bug in 8.2.0, which is now the nixpkgs default. This change overrides that default in favor of the known good version. Once 8.3.0 is the default, the override can be dropped.
* Arch/Manjaro fix
|
