summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-06-12One shot support for swap hands (#8590)Zsolt Parragi
This commits add the SH_OS keycode, which works similarly to one shot layers: * while pressed, the keyboard is swapped * if no keys were pressed while it was pressed, the next key press is swapped SH_OS also supports chaining with one shot layers: OSL(x) + SH_OS + key interprets the key press on the oneshot layer. The ONESHOT_TIMEOUT setting used by one shot keys and layers is also used by oneshot swap hands. In the above chaining scenario the timeout of the oneshot layer is reset when swap hands is activated. Resolves #2682
2020-06-12Allow expanding from 8 to 32 RGB Lighting Layers (#8941)Joshua Diamond
* Allow 16 lighting layers * Require #define RGBLIGHT_LAYERS_16 to enable 16 layers * Override RGBLIGHT_MAX_LAYERS to set maximum number of lighting layers * Enforce lower bound on RGBLIGHT_MAX_LAYERS Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com> * Fix an error in the check for valid RGBLIGHT_MAX_LAYERS * Don't use bitfield / PACKED, as it causes bloat * Update documentation re: up to 32 lighting layers * Run cformat * Add note about increasing FW size in docs/config_options.md Co-authored-by: Drashna Jaelre <drashna@live.com> * Remove no-longer-valid comment * Add doc note that split sync will be slower Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
2020-06-12Optimization for scanning less layers. (#8311)Alex Ong
* Optimization for scanning less layers. * Rename NUM_LAYERS to MAX_LAYER.
2020-06-12Fix off by one error with oled_write_raw_P (#9045)Brian Mock
2020-06-12Improve security of avrdude by eliminating the use of well-known names. (#9026)Zach White
* Improve security by eliminating the use of well-known names. * Add an additional $ so the shell expands $TMP1 and $TMP2 Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joel Challis <git@zvecr.com>
2020-06-12New RGB Lighting effect: Twinkle (#8887)Joshua Diamond
* Add twinkle RGB Lighting effect * 2nd twinkle algo - double-buffering * Further refinement: Per-LED twinkle * Add documentation for Twinkle RBG Lighting mode * Bias twinkle saturation closer to the set value * Fix whitespace
2020-06-12Add ability to blink lighting layer for a specified duration (#8760)Joshua Diamond
* Implement momentarily blink of lighting layers * Refactor spidey3 userspace to use rgb layer blink * Remove un-necessary line from example in documentation * Revert "Refactor spidey3 userspace to use rgb layer blink" This reverts commit 831649bb680c41c6d663ae6fa86d13f4f8bebdd8. * Adds a missing bit of documentation about lighting layer blink * Update docs/feature_rgblight.md per suggestions Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update docs/feature_rgblight.md per suggestions Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update docs/feature_rgblight.md per suggestions Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * cformat, as suggested Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2020-06-12Fix bug in UC_RMOD, add shift and audio support for UC_MOD/UC_RMOD(#8674)Konstantin Đorđević
* Invert UC_MOD/UC_RMOD direction when Shift is held Also use MOD_MASK_SHIFT in process_rgb.c * Allow audio to be played for UC_MOD, UC_RMOD keycodes as well * Fix signedness bug in reverse input mode cycling * Misc formatting in process_unicode_common.c * Address clang-format issues * Make decode_utf8 helper function file-local (static)
2020-06-12Remove Bluefruit protocol (#9008)Ryan
* Remove Bluefruit protocol * Remove dir from doxygen TODO pile
2020-06-12Initial vusb console support (#8559)Joel Challis
2020-06-12Add some usages needed for ChromeOS hosts (#8996)Joshua Moses Diamond
2020-06-12Provide a mechanism for split keyboards to process key press on both halves ↵Joel Challis
(#9001)
2020-06-12QMK-ify some GPIO macros (#8315)Ryan
2020-06-12add 'togglePin' convenience function (#8734)JohSchneider
* add 'togglePin' conveniance function for AVR and chibios * drop outmost parantheses Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com> * toggle pin on avrs toggle a pin configured as output by writing the corresponding bit to the PIN register Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com> * togglepin: add documentation for newly added function * Update docs/internals_gpio_control.md Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com> * on AVR: use PORTD to toggle the output ... since not all MCUs support toggling through writing to PIN Co-Authored-By: Ryan <fauxpark@gmail.com> Co-authored-by: Johannes <you@example.com> Co-authored-by: Konstantin Đorđević <vomindoraan@gmail.com> Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-06-12Convert clipping variables in rgblight.c to a structure (#7720)Drashna Jaelre
2020-06-12Add SPI master for ChibiOS/ARM. (#8779)Nick Brassel
2020-06-12Allow some usbconfig.h overrides at the keyboard level (#8647)Joel Challis
2020-06-12Add Romanian keymap and sendstring LUT (#8852)Ryan
2020-06-12kle2info: trim down x and y outputKeenan Brock
fixes quirks with float implementation. before: {"label":"Esc", "x":0.66, "y":1.45}, {"label":"!", "x":1.6600000000000001, "y":1.45} after: {"label":"Esc", "x":0.66, "y":1.45}, {"label":"!", "x":1.66, "y":1.45}
2020-06-12kle2json: fix invocation errorKeenan Brock
resolves an issue while finding the file path TypeError: unsupported operand type(s) for +: 'PosixPath' and 'str'
2020-06-12Clean up ATSAM ifdefs (#8808)Ryan
2020-06-12Add back deprecated SE_AE keycodeKonstantin Đorđević
2020-06-12Add dvorak's spanish variant to quantum/keymap_extras (#8732)joseandres42
* Added dvorak's spanish variant. * Fixed spacing * Fixed filename typo * Applied fixes and suggestions. * Fixed spacing * Added sendstring_spanish_dvorak.h * Fixed sendstring_spanish.h * Update quantum/keymap_extras/sendstring_spanish_dvorak.h Co-Authored-By: Ryan <fauxpark@gmail.com> * Update quantum/keymap_extras/sendstring_spanish.h Co-Authored-By: Ryan <fauxpark@gmail.com> * Update quantum/keymap_extras/sendstring_spanish_dvorak.h Co-Authored-By: Ryan <fauxpark@gmail.com> Co-authored-by: joseandres42 <joseandres42@Orion-PC.localdomain> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-06-12Update French and German macOS keymaps and add sendstring LUTs (#8700)Ryan
2020-06-12Update Swiss French/German keymaps and add sendstring LUTs (#8689)Ryan
2020-06-12Move everything to Python 3.6 (#8835)skullydazed
2020-06-12Load keymap-level rules.mk when compiling keymap.json (#8841)Erovia
2020-06-12Remove Atmel FLIP from install scripts and documentation (#8822)Ryan
2020-06-12Remove old setup scripts (#8811)Ryan
2020-06-12MILC: Fix setting config values for store_true and store_false (#8813)skullydazed
2020-06-12Miscellaneous stuff: remove clang-complete and autocomplete.sh, fix some ↵Ryan
rules.mk comments (#8784)
2020-06-12CLI: Fix doctor error when can't run `bin/qmk --version`. (#8796)Pete Johanson
2020-06-12CLI: Use `shutil.which` to detect gmake, instead of OS check.Pete Johanson
2020-06-12CLI: Invoke gmake on FreeBSD when using `qmk compile`.Pete Johanson
* Current makefiles aren't portable, so invoke gmake on FreeBSD.
2020-06-12Slight rename of double angle quote keycodesfauxpark
2020-06-12Fix AVR SPI parameter configuration, remove timeouts due to sync protocol. ↵Nick Brassel
(#8775)
2020-06-12Add support for hardware and board initialisation overrides. (#8330)Nick Brassel
* Add support for hardware and board initialisation overrides. * qmk cformat. * Add some documentation. * Docs clarity. * Make early_hardware_init_pre a no-op for now, until migrations occur. * Doco update * Make distinction between keyboard and ChibiOS board in docs * Doc anchors. * Update tmk_core/protocol/chibios/main.c Co-Authored-By: Joel Challis <git@zvecr.com> * Rework bootloader entry to be off by default, allow opting-in. Co-authored-by: Joel Challis <git@zvecr.com>
2020-06-12Bugfix for quantum/dip_switch.c (#8731)Takeshi ISHII
* dipsw test on helix/rev2/sc/back:five_rows * bug fix quantum/dip_switch.c * test end. remove test code. Revert "dipsw test on helix/rev2/sc/back:five_rows" This reverts commit 4b13ebb996e1c4997e6deb1fa3b3227db5fa9661. * dipsw test on helix/rev2/sc/back:five_rows * update quantum/dip_switch.c * test end. remove test code. Revert "dipsw test on helix/rev2/sc/back:five_rows" This reverts commit bf99ace095528ad65c531229bcf5ece037dda595.
2020-06-12Add *OPT aliases for *ALT keycodes and macros (#8714)Konstantin Đorđević
2020-06-12Added Workman ZXCVM variation (#8686)artjomsR
* Added Workman ZXCVM variation * Update quantum/keymap_extras/keymap_workman_zxcvm.h Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com> * Update quantum/keymap_extras/sendstring_workman_zxcvm.h Co-Authored-By: Ryan <fauxpark@gmail.com> * Update quantum/keymap_extras/keymap_workman_zxcvm.h Co-Authored-By: Ryan <fauxpark@gmail.com> * Update quantum/keymap_extras/keymap_workman_zxcvm.h Co-Authored-By: Ryan <fauxpark@gmail.com> * Update quantum/keymap_extras/sendstring_workman_zxcvm.h Co-Authored-By: Ryan <fauxpark@gmail.com> Co-authored-by: Konstantin Đorđević <vomindoraan@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-06-12Fix bug with layer caching in get_event_keycode (#8693)Drashna Jaelre
* Fix bug with layer caching in get_event_keycode * Improve naming
2020-06-12Upgrade gcc version/tweak package installs in Gentoo installation (#8757)James Forcier
GCC 4.9.4 is no longer available on Gentoo (or Sabayon), which causes problems when attempting to install on either of these platforms. Since QMK is not particularly sensitive to its GCC version, modify the version restriction to <9 so newer versions of GCC may be installed. Since the toolchain for arm-none-eabi isn't currently installed as part of setup, add that as well. Additionally, drop the Python installation as part of the Gentoo installation process. Python is a core system package on Gentoo and can therefore be assumed to be present; in addition, the slot restriction of 3.5 which was present is also no longer available in Gentoo. Finally, separate the gcc rebuild invocation of `emerge` from the new packages that may need to be installed, and apply the `--noreplace` flag to new packages so that they are not rebuilt if already present.
2020-06-12quantum/debounce: Added sym_pk debounce algorithm (#8587)Purdea Andrei
* quantum/debounce: Added sym_pk debounce algorithm * Apply suggestions from code review Co-Authored-By: Ryan <fauxpark@gmail.com> * quantum/debounce/sym_pk: delete comments and rename functions following code review * quantum/debounce/sym_pk: Modifications for code readability according to code review * quantum/debounce/sym_pk: Modifications for code readability according to code review (2) * quantum/debounce/sym_pk: code review: cleaner code Co-Authored-By: Nick Brassel <nick@tzarc.org> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Nick Brassel <nick@tzarc.org>
2020-06-12Various fixes to how timer differences are calculated (#8585)Purdea Andrei
* tmk_core/common: Fixing TIMER_DIFF macro to calculate difference correctly after the timer wraps. Let's go through an example, using the following macro: If the first timer read is 0xe4 and the second one is 0x32, the timer wrapped. If the timer would have had more bits, it's new value would have been 0x132, and the correct difference in time is 0x132 - 0xe4 = 0x4e old code TIMER_DIFF_8(0x32, 0xe4) = 0xff - 0xe4 + 0x32 = 0x4d, which is wrong. new code TIMER_DIFF_8(0x32, 0xe4) = 0xff + 1 - 0xe4 + 0x32 = 0x4e, which is correct. This also gives a chance for a smart compiler to optimize the code using normal integer overflow. For example on AVR, the following C code: uint8_t __attribute__ ((noinline)) test(uint8_t current_timer, uint8_t start_timer) { return TIMER_DIFF_8(current_timer, start_timer); } With the original code, it gets translated to the following list of instructions: 00004c6e <test>: 4c6e: 98 2f mov r25, r24 4c70: 86 1b sub r24, r22 4c72: 96 17 cp r25, r22 4c74: 08 f4 brcc .+2 ; 0x4c78 <test+0xa> 4c76: 81 50 subi r24, 0x01 ; 1 4c78: 08 95 ret But with this commit, it gets translated to a single instruction: 00004c40 <test>: 4c40: 86 1b sub r24, r22 4c42: 08 95 ret This unfortunately doesn't always work so nicely, for example the following C code: int __attribute__ ((noinline)) test(uint8_t current_timer, uint8_t start_timer) { return TIMER_DIFF_8(current_timer, start_timer); } (Note: return type changed to int) With the original code it gets translated to: 00004c6e <test>: 4c6e: 28 2f mov r18, r24 4c70: 30 e0 ldi r19, 0x00 ; 0 4c72: 46 2f mov r20, r22 4c74: 50 e0 ldi r21, 0x00 ; 0 4c76: 86 17 cp r24, r22 4c78: 20 f0 brcs .+8 ; 0x4c82 <test+0x14> 4c7a: c9 01 movw r24, r18 4c7c: 84 1b sub r24, r20 4c7e: 95 0b sbc r25, r21 4c80: 08 95 ret 4c82: c9 01 movw r24, r18 4c84: 84 1b sub r24, r20 4c86: 95 0b sbc r25, r21 4c88: 81 50 subi r24, 0x01 ; 1 4c8a: 9f 4f sbci r25, 0xFF ; 255 4c8c: 08 95 ret Wth this commit it gets translated to: 00004c40 <test>: 4c40: 28 2f mov r18, r24 4c42: 30 e0 ldi r19, 0x00 ; 0 4c44: 46 2f mov r20, r22 4c46: 50 e0 ldi r21, 0x00 ; 0 4c48: 86 17 cp r24, r22 4c4a: 20 f0 brcs .+8 ; 0x4c54 <test+0x14> 4c4c: c9 01 movw r24, r18 4c4e: 84 1b sub r24, r20 4c50: 95 0b sbc r25, r21 4c52: 08 95 ret 4c54: c9 01 movw r24, r18 4c56: 84 1b sub r24, r20 4c58: 95 0b sbc r25, r21 4c5a: 93 95 inc r25 4c5c: 08 95 ret There is not much performance improvement in this case, however at least with this commit it functions correctly. Note: The following commit will improve compiler output for the latter example. * tmk_core/common: Improve code generation for TIMER_DIFF* macros Because of integer promotion the compiler is having a hard time generating efficient code to calculate TIMER_DIFF* macros in some situations. In the below example, the return value is "int", and this is causing the trouble. Example C code: int __attribute__ ((noinline)) test(uint8_t current_timer, uint8_t start_timer) { return TIMER_DIFF_8(current_timer, start_timer); } BEFORE: (with -Os) 00004c40 <test>: 4c40: 28 2f mov r18, r24 4c42: 30 e0 ldi r19, 0x00 ; 0 4c44: 46 2f mov r20, r22 4c46: 50 e0 ldi r21, 0x00 ; 0 4c48: 86 17 cp r24, r22 4c4a: 20 f0 brcs .+8 ; 0x4c54 <test+0x14> 4c4c: c9 01 movw r24, r18 4c4e: 84 1b sub r24, r20 4c50: 95 0b sbc r25, r21 4c52: 08 95 ret 4c54: c9 01 movw r24, r18 4c56: 84 1b sub r24, r20 4c58: 95 0b sbc r25, r21 4c5a: 93 95 inc r25 4c5c: 08 95 ret AFTER: (with -Os) 00004c40 <test>: 4c40: 86 1b sub r24, r22 4c42: 90 e0 ldi r25, 0x00 ; 0 4c44: 08 95 ret Note: the example is showing -Os but improvements can be seen at all optimization levels, including -O0. We never use -O0, but I tested it to make sure that no extra code is generated in that case.OA * quantum/debounce: Fix custom wrapping timers in eager_pr and eager_pk debounce algorithms Please see the below simulated sequence of events: Column A is the 16-bit value returned by read_timer(); Column B is the value returned by custom_wrap_timer_read(); Column C is the original code: (timer_read() % MAX_DEBOUNCE) A, B, C 65530, 19, 30 65531, 20, 31 65532, 21, 32 65533, 22, 33 65534, 23, 34 65535, 24, 35 0 25, 0 1, 26, 1 2, 27, 2 3, 28, 3 4, 29, 4 5, 30, 5 read_timer() wraps about every 1.09 seconds, and so debouncing might fail at these times without this commit. * quantum/debounce/eager_pr and eager_pk: modifications for code readability according to code review. * quantum/debounce/eager_pr and eager_pk: modifications for code readability according to code review. (2)
2020-06-12Add PS2_MOUSE_ROTATE to compensate for device orientation (#8650)Manna Harbour
* Add PS2_MOUSE_ROTATE to compensate for device orientation * fixup! Add PS2_MOUSE_ROTATE to compensate for device orientation * Reformat with IndentPPDirectives: AfterHash as per #6316
2020-06-12Fix compile issues related to NO_ACTION_MACRO/FUNCTION and LTO_ENABLE (#8663)Konstantin Đorđević
* Define NO_ACTION_MACRO/FUNCTION in header instead of makefile when LTO is enabled Currently, boards and keymaps that define NO_ACTION_MACRO/FUNCTION unconditionally will not compile with LTO_ENABLE (#8604). This fixes the issue by moving the definitions from common.mk to action.h, which enables us to check for previous definitions of those macros (this cannot be done in a makefile). * Remove LTO checks in templates Since now NO_ACTION_MACRO/FUNCTION are defined as needed in action.h (which is included by quantum.h), checking for LTO in keyboard and user code is no longer required. * Update LTO_ENABLE docs
2020-06-12Fix edge-case with configErovia
Without this check, users can lock themselves out by enabling developer mode, than disabling the dependencies. They wouldn't be able to turn off developer mode as none of the subcommands (including 'config') would work.
2020-06-12Don't hide for devs...Erovia
2020-06-12Apply @skullydazed's suggestions, move 'import milc'Erovia
Only 'import milc' after we are sure that the minimum required modules are available, as it depends on a few of them.
2020-06-12Rebase on master, hide some other subcommandsErovia
The list of hidden subcommands were approved by @skullydazed ;) Currently hidden if 'user.developer' is not True: - cformat - docs - kle2json - pyformat - pytest