summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-28Remove Handwired folderDrashna Jaelre
2020-06-12fix: HoustonFlorian Didron
2020-06-12Pull A5 High when channel is stoppedDrashna Jael're
2020-06-12Added missing shutdown_user() hook (#9180)yulei
* add missing shutdown_user() * use reset_keyboard() from quantum
2020-06-12Fix i2c EEPROM compile issue when Console is enabled (#9186)Drashna Jaelre
* Fix i2c EEPROM compile issue when Console is enabled * Only use if both console and debugging is enabled
2020-06-12Fix SPI EEPROM compile issue when Console is enabled (#9193)Drashna Jaelre
2020-06-12Fix build. (#9163)Nick Brassel
2020-06-12CLI: Rework submodule checking (#9162)Erovia
2020-06-12Remove broken example from Makefile (#9159)ridingqwerty
* Remove broken example from Makefile * Correct example in Vagrantfile
2020-06-12Initial arm serial partially based on old lets split codezvecr
2020-06-12ARM split - Add uart half duplex transport support (#7987)Joel Challis
* ARM split - Add uart half duplex transport support * Fix for f103 * initial full duplex pass * partially remove full duplex * Correct speeds within driver docs Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Nick Brassel <nick@tzarc.org> format code according to conventions [skip ci]
2020-06-12Slight speed increases for matrix scanning (#9150)Joel Challis
2020-06-12Use LUFA funcs for split_util (#8594)Joel Challis
2020-06-12Allow for overriding RAW endpoint usage page and ID. (#8834)Nick Brassel
* Allow for overriding RAW endpoint usage page and ID. * Move usb_descriptor_common.h. * Docs update.
2020-06-12Fix submodule check (#9155)Erovia
2020-06-12Fix ChibiOS FPU build logic (#9132)Joel Challis
2020-06-12CLI: Improve experience when running `qmk setup` on FreeBSD. (#8798)Pete Johanson
* CLI: Improve experience when running `qmk setup` on FreeBSD. * Install the `avrdude` package as well. * Switch to installing python packages w/ `--user` flag. * Basic getting started sections for FreeBSD. * Update `util/freebsd_install.sh` for root/non-root branches. * Add ID to doc section. Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com> * Add ID to another docs section. Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com> * Use `; then` in script for consistency. Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com> * Updated to use sudo in one shot if available. * Apply suggestions from code review Co-authored-by: Erovia <Erovia@users.noreply.github.com> * Style fixes for latest version in master. * Apply suggestions from code review Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: skullydazed <skullydazed@users.noreply.github.com> Co-authored-by: Erovia <Erovia@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-06-12MSYS2 install: bodge out avrdude package installation for USBaspLoaderRyan
2020-06-12Disable Mousekey Command interface when Constant speed is enabled (#7017)Drashna Jaelre
2020-06-12Streamline the macos install processskullY
2020-06-12Add SPI 25xx EEPROM support. (#8780)Nick Brassel
2020-06-12Reorder logic within common_features.mk (#8517)Joel Challis
* Reorder logic within common_features.mk * Revert haptic logic * Add back path to make tests happy * Update common_features.mk Co-Authored-By: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-06-12Add query functions for RGB Light and RGB Matrix (#8960)Drashna Jaelre
* Add additional query functions for RGBLIGHT * Add additional query functions for RGB Matrix * Change names of enable check functions * Fix macro for rgb matrix takeover of rgblight functions * Add documentation for rgb_matrix_get_hsv() * Add *_get_hsv function to rgblight
2020-06-12Adding unit tests for list-keymaps command (#7711)codecoffeecode
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> Co-Authored-By: Erovia <Erovia@users.noreply.github.com>
2020-06-12CLI: Tune doctor's udev rule checking to match #8750Erovia
2020-06-12[kle2info] Trim the code in `kle2xy` (#8955)Keenan Brock
* [kle2jinfo] use min/max instead of if This is a slight change. Before, the key_skel would keep the invalid value for future keys. I think this is what was actually intended. * [kle2info] calculate x x is the current_x * key_size + (key_size/2) y is the current_y * key_size + (key_size/2) no reason to track both
2020-06-12avoid 'Entering|Leaving directory' messages (#9061)Joel Challis
2020-06-12Improve stock bootloader list (#9067)Ryan
* Improve stock bootloader list * Switch version numbers on USB64/128 bootloaders * Unix line endings for PS2AVRGB bootloader * Update PS2AVRGB bootloader to 1.0.1 * Also mention bootloader rule * Didn't need to change the links
2020-06-12V-USB Interface reorder (#9090)yiancar
2020-06-12One shot support for swap hands (#8590)Zsolt Parragi
This commits add the SH_OS keycode, which works similarly to one shot layers: * while pressed, the keyboard is swapped * if no keys were pressed while it was pressed, the next key press is swapped SH_OS also supports chaining with one shot layers: OSL(x) + SH_OS + key interprets the key press on the oneshot layer. The ONESHOT_TIMEOUT setting used by one shot keys and layers is also used by oneshot swap hands. In the above chaining scenario the timeout of the oneshot layer is reset when swap hands is activated. Resolves #2682
2020-06-12Allow expanding from 8 to 32 RGB Lighting Layers (#8941)Joshua Diamond
* Allow 16 lighting layers * Require #define RGBLIGHT_LAYERS_16 to enable 16 layers * Override RGBLIGHT_MAX_LAYERS to set maximum number of lighting layers * Enforce lower bound on RGBLIGHT_MAX_LAYERS Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com> * Fix an error in the check for valid RGBLIGHT_MAX_LAYERS * Don't use bitfield / PACKED, as it causes bloat * Update documentation re: up to 32 lighting layers * Run cformat * Add note about increasing FW size in docs/config_options.md Co-authored-by: Drashna Jaelre <drashna@live.com> * Remove no-longer-valid comment * Add doc note that split sync will be slower Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
2020-06-12Optimization for scanning less layers. (#8311)Alex Ong
* Optimization for scanning less layers. * Rename NUM_LAYERS to MAX_LAYER.
2020-06-12Fix off by one error with oled_write_raw_P (#9045)Brian Mock
2020-06-12Improve security of avrdude by eliminating the use of well-known names. (#9026)Zach White
* Improve security by eliminating the use of well-known names. * Add an additional $ so the shell expands $TMP1 and $TMP2 Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joel Challis <git@zvecr.com>
2020-06-12New RGB Lighting effect: Twinkle (#8887)Joshua Diamond
* Add twinkle RGB Lighting effect * 2nd twinkle algo - double-buffering * Further refinement: Per-LED twinkle * Add documentation for Twinkle RBG Lighting mode * Bias twinkle saturation closer to the set value * Fix whitespace
2020-06-12Add ability to blink lighting layer for a specified duration (#8760)Joshua Diamond
* Implement momentarily blink of lighting layers * Refactor spidey3 userspace to use rgb layer blink * Remove un-necessary line from example in documentation * Revert "Refactor spidey3 userspace to use rgb layer blink" This reverts commit 831649bb680c41c6d663ae6fa86d13f4f8bebdd8. * Adds a missing bit of documentation about lighting layer blink * Update docs/feature_rgblight.md per suggestions Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update docs/feature_rgblight.md per suggestions Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update docs/feature_rgblight.md per suggestions Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * cformat, as suggested Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2020-06-12Fix bug in UC_RMOD, add shift and audio support for UC_MOD/UC_RMOD(#8674)Konstantin Đorđević
* Invert UC_MOD/UC_RMOD direction when Shift is held Also use MOD_MASK_SHIFT in process_rgb.c * Allow audio to be played for UC_MOD, UC_RMOD keycodes as well * Fix signedness bug in reverse input mode cycling * Misc formatting in process_unicode_common.c * Address clang-format issues * Make decode_utf8 helper function file-local (static)
2020-06-12Remove Bluefruit protocol (#9008)Ryan
* Remove Bluefruit protocol * Remove dir from doxygen TODO pile
2020-06-12Initial vusb console support (#8559)Joel Challis
2020-06-12Add some usages needed for ChromeOS hosts (#8996)Joshua Moses Diamond
2020-06-12Provide a mechanism for split keyboards to process key press on both halves ↵Joel Challis
(#9001)
2020-06-12QMK-ify some GPIO macros (#8315)Ryan
2020-06-12add 'togglePin' convenience function (#8734)JohSchneider
* add 'togglePin' conveniance function for AVR and chibios * drop outmost parantheses Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com> * toggle pin on avrs toggle a pin configured as output by writing the corresponding bit to the PIN register Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com> * togglepin: add documentation for newly added function * Update docs/internals_gpio_control.md Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com> * on AVR: use PORTD to toggle the output ... since not all MCUs support toggling through writing to PIN Co-Authored-By: Ryan <fauxpark@gmail.com> Co-authored-by: Johannes <you@example.com> Co-authored-by: Konstantin Đorđević <vomindoraan@gmail.com> Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-06-12Convert clipping variables in rgblight.c to a structure (#7720)Drashna Jaelre
2020-06-12Add SPI master for ChibiOS/ARM. (#8779)Nick Brassel
2020-06-12Allow some usbconfig.h overrides at the keyboard level (#8647)Joel Challis
2020-06-12Add Romanian keymap and sendstring LUT (#8852)Ryan
2020-06-12kle2info: trim down x and y outputKeenan Brock
fixes quirks with float implementation. before: {"label":"Esc", "x":0.66, "y":1.45}, {"label":"!", "x":1.6600000000000001, "y":1.45} after: {"label":"Esc", "x":0.66, "y":1.45}, {"label":"!", "x":1.66, "y":1.45}
2020-06-12kle2json: fix invocation errorKeenan Brock
resolves an issue while finding the file path TypeError: unsupported operand type(s) for +: 'PosixPath' and 'str'
2020-06-12Clean up ATSAM ifdefs (#8808)Ryan