diff options
Diffstat (limited to 'tmk_core')
40 files changed, 60 insertions, 7780 deletions
diff --git a/tmk_core/common.mk b/tmk_core/common.mk index aa8a0eb7ad..63de7c7ede 100644 --- a/tmk_core/common.mk +++ b/tmk_core/common.mk @@ -1,3 +1,5 @@ +PRINTF_PATH = $(LIB_PATH)/printf + COMMON_DIR = common PLATFORM_COMMON_DIR = $(COMMON_DIR)/$(PLATFORM_KEY) @@ -21,7 +23,12 @@ TMK_COMMON_SRC += $(COMMON_DIR)/host.c \ ifeq ($(PLATFORM),AVR) TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/xprintf.S else ifeq ($(PLATFORM),CHIBIOS) - TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/printf.c + TMK_COMMON_SRC += $(PRINTF_PATH)/printf.c + TMK_COMMON_DEFS += -DPRINTF_DISABLE_SUPPORT_FLOAT + TMK_COMMON_DEFS += -DPRINTF_DISABLE_SUPPORT_EXPONENTIAL + TMK_COMMON_DEFS += -DPRINTF_DISABLE_SUPPORT_LONG_LONG + TMK_COMMON_DEFS += -DPRINTF_DISABLE_SUPPORT_PTRDIFF_T + VPATH += $(PRINTF_PATH) else ifeq ($(PLATFORM),ARM_ATSAM) TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/printf.c endif diff --git a/tmk_core/common/action.c b/tmk_core/common/action.c index 3b1268dc94..7a53e08ed3 100644 --- a/tmk_core/common/action.c +++ b/tmk_core/common/action.c @@ -48,7 +48,7 @@ int retro_tapping_counter = 0; #endif #ifdef IGNORE_MOD_TAP_INTERRUPT_PER_KEY -__attribute__((weak)) bool get_ignore_mod_tap_interrupt(uint16_t keycode) { return false; } +__attribute__((weak)) bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record) { return false; } #endif #ifndef TAP_CODE_DELAY @@ -335,7 +335,7 @@ void process_action(keyrecord_t *record, action_t action) { # if !defined(IGNORE_MOD_TAP_INTERRUPT) || defined(IGNORE_MOD_TAP_INTERRUPT_PER_KEY) if ( # ifdef IGNORE_MOD_TAP_INTERRUPT_PER_KEY - !get_ignore_mod_tap_interrupt(get_event_keycode(record->event, false)) && + !get_ignore_mod_tap_interrupt(get_event_keycode(record->event, false), &record) && # endif record->tap.interrupted) { dprint("mods_tap: tap: cancel: add_mods\n"); diff --git a/tmk_core/common/action_tapping.c b/tmk_core/common/action_tapping.c index 34f08d8904..fe545c79a0 100644 --- a/tmk_core/common/action_tapping.c +++ b/tmk_core/common/action_tapping.c @@ -19,10 +19,10 @@ # define IS_TAPPING_RELEASED() (IS_TAPPING() && !tapping_key.event.pressed) # define IS_TAPPING_KEY(k) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (k))) -__attribute__((weak)) uint16_t get_tapping_term(uint16_t keycode) { return TAPPING_TERM; } +__attribute__((weak)) uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { return TAPPING_TERM; } # ifdef TAPPING_TERM_PER_KEY -# define WITHIN_TAPPING_TERM(e) (TIMER_DIFF_16(e.time, tapping_key.event.time) < get_tapping_term(get_event_keycode(tapping_key.event, false))) +# define WITHIN_TAPPING_TERM(e) (TIMER_DIFF_16(e.time, tapping_key.event.time) < get_tapping_term(get_event_keycode(tapping_key.event, false), &tapping_key)) # else # define WITHIN_TAPPING_TERM(e) (TIMER_DIFF_16(e.time, tapping_key.event.time) < TAPPING_TERM) # endif @@ -122,7 +122,7 @@ bool process_tapping(keyrecord_t *keyp) { # if defined(TAPPING_TERM_PER_KEY) || (TAPPING_TERM >= 500) || defined(PERMISSIVE_HOLD) || defined(PERMISSIVE_HOLD_PER_KEY) else if ( # ifdef TAPPING_TERM_PER_KEY - (get_tapping_term(get_event_keycode(tapping_key.event, false)) >= 500) && + (get_tapping_term(get_event_keycode(tapping_key.event, false), keyp) >= 500) && # endif # ifdef PERMISSIVE_HOLD_PER_KEY !get_permissive_hold(get_event_keycode(tapping_key.event, false), keyp) && diff --git a/tmk_core/common/action_tapping.h b/tmk_core/common/action_tapping.h index 5eaef1c5f0..7015ce7612 100644 --- a/tmk_core/common/action_tapping.h +++ b/tmk_core/common/action_tapping.h @@ -33,7 +33,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifndef NO_ACTION_TAPPING uint16_t get_event_keycode(keyevent_t event, bool update_layer_cache); -uint16_t get_tapping_term(uint16_t keycode); +uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record); void action_tapping_process(keyrecord_t record); #endif diff --git a/tmk_core/common/chibios/printf.c b/tmk_core/common/chibios/printf.c deleted file mode 100644 index a99752bb3d..0000000000 --- a/tmk_core/common/chibios/printf.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - * found at: http://www.sparetimelabs.com/tinyprintf/tinyprintf.php - * and: http://www.sparetimelabs.com/printfrevisited/printfrevisited.php - */ - -/* -File: printf.c - -Copyright (C) 2004 Kustaa Nyholm - -This library is free software; you can redistribute it and/or -modify it under the terms of the GNU Lesser General Public -License as published by the Free Software Foundation; either -version 2.1 of the License, or (at your option) any later version. - -This library is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -Lesser General Public License for more details. - -You should have received a copy of the GNU Lesser General Public -License along with this library; if not, write to the Free Software -Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - -*/ - -#include "printf.h" - -typedef void (*putcf)(void*, char); -static putcf stdout_putf; -static void* stdout_putp; - -// this adds cca 400 bytes -#define PRINTF_LONG_SUPPORT - -#ifdef PRINTF_LONG_SUPPORT - -static void uli2a(unsigned long int num, unsigned int base, int uc, char* bf) { - int n = 0; - unsigned int d = 1; - while (num / d >= base) d *= base; - while (d != 0) { - int dgt = num / d; - num %= d; - d /= base; - if (n || dgt > 0 || d == 0) { - *bf++ = dgt + (dgt < 10 ? '0' : (uc ? 'A' : 'a') - 10); - ++n; - } - } - *bf = 0; -} - -static void li2a(long num, char* bf) { - if (num < 0) { - num = -num; - *bf++ = '-'; - } - uli2a(num, 10, 0, bf); -} - -#endif - -static void ui2a(unsigned int num, unsigned int base, int uc, char* bf) { - int n = 0; - unsigned int d = 1; - while (num / d >= base) d *= base; - while (d != 0) { - int dgt = num / d; - num %= d; - d /= base; - if (n || dgt > 0 || d == 0) { - *bf++ = dgt + (dgt < 10 ? '0' : (uc ? 'A' : 'a') - 10); - ++n; - } - } - *bf = 0; -} - -static void i2a(int num, char* bf) { - if (num < 0) { - num = -num; - *bf++ = '-'; - } - ui2a(num, 10, 0, bf); -} - -static int a2d(char ch) { - if (ch >= '0' && ch <= '9') - return ch - '0'; - else if (ch >= 'a' && ch <= 'f') - return ch - 'a' + 10; - else if (ch >= 'A' && ch <= 'F') - return ch - 'A' + 10; - else - return -1; -} - -static char a2i(char ch, const char** src, int base, int* nump) { - const char* p = *src; - int num = 0; - int digit; - while ((digit = a2d(ch)) >= 0) { - if (digit > base) break; - num = num * base + digit; - ch = *p++; - } - *src = p; - *nump = num; - return ch; -} - -static void putchw(void* putp, putcf putf, int n, char z, char* bf) { - char fc = z ? '0' : ' '; - char ch; - char* p = bf; - while (*p++ && n > 0) n--; - while (n-- > 0) putf(putp, fc); - while ((ch = *bf++)) putf(putp, ch); -} - -void tfp_format(void* putp, putcf putf, const char* fmt, va_list va) { - // This used to handle max of 12, but binary support jumps this to at least 32 - char bf[36]; - - char ch; - - while ((ch = *(fmt++))) { - if (ch != '%') - putf(putp, ch); - else { - char lz = 0; -#ifdef PRINTF_LONG_SUPPORT - char lng = 0; -#endif - int w = 0; - ch = *(fmt++); - if (ch == '0') { - ch = *(fmt++); - lz = 1; - } - if (ch >= '0' && ch <= '9') { - ch = a2i(ch, &fmt, 10, &w); - } -#ifdef PRINTF_LONG_SUPPORT - if (ch == 'l') { - ch = *(fmt++); - lng = 1; - } -#endif - switch (ch) { - case 0: - goto abort; - case 'u': { -#ifdef PRINTF_LONG_SUPPORT - if (lng) - uli2a(va_arg(va, unsigned long int), 10, 0, bf); - else -#endif - ui2a(va_arg(va, unsigned int), 10, 0, bf); - putchw(putp, putf, w, lz, bf); - break; - } - case 'd': { -#ifdef PRINTF_LONG_SUPPORT - if (lng) - li2a(va_arg(va, unsigned long int), bf); - else -#endif - i2a(va_arg(va, int), bf); - putchw(putp, putf, w, lz, bf); - break; - } - case 'x': - case 'X': -#ifdef PRINTF_LONG_SUPPORT - if (lng) - uli2a(va_arg(va, unsigned long int), 16, (ch == 'X'), bf); - else -#endif - ui2a(va_arg(va, unsigned int), 16, (ch == 'X'), bf); - putchw(putp, putf, w, lz, bf); - break; - case 'c': - putf(putp, (char)(va_arg(va, int))); - break; - case 's': - putchw(putp, putf, w, 0, va_arg(va, char*)); - break; - case 'b': -#ifdef PRINTF_LONG_SUPPORT - if (lng) - uli2a(va_arg(va, unsigned long int), 2, 0, bf); - else -#endif - ui2a(va_arg(va, unsigned int), 2, 0, bf); - putchw(putp, putf, w, lz, bf); - break; - case '%': - putf(putp, ch); - default: - break; - } - } - } -abort:; -} - -void init_printf(void* putp, void (*putf)(void*, char)) { - stdout_putf = putf; - stdout_putp = putp; -} - -int tfp_printf(const char* fmt, ...) { - va_list va; - va_start(va, fmt); - tfp_format(stdout_putp, stdout_putf, fmt, va); - va_end(va); - - return 1; -} - -static void putcp(void* p, char c) { *(*((char**)p))++ = c; } - -int tfp_sprintf(char* s, const char* fmt, ...) { - va_list va; - va_start(va, fmt); - tfp_format(&s, putcp, fmt, va); - putcp(&s, 0); - va_end(va); - - return 1; -} diff --git a/tmk_core/common/chibios/printf.h b/tmk_core/common/chibios/printf.h deleted file mode 100644 index 775459e1e8..0000000000 --- a/tmk_core/common/chibios/printf.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - * found at: http://www.sparetimelabs.com/tinyprintf/tinyprintf.php - * and: http://www.sparetimelabs.com/printfrevisited/printfrevisited.php - */ - -/* -File: printf.h - -Copyright (C) 2004 Kustaa Nyholm - -This library is free software; you can redistribute it and/or -modify it under the terms of the GNU Lesser General Public -License as published by the Free Software Foundation; either -version 2.1 of the License, or (at your option) any later version. - -This library is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -See the GNU Lesser General Public License for more details. - -You should have received a copy of the GNU Lesser General Public -License along with this library; if not, write to the Free Software -Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - -This library is realy just two files: 'printf.h' and 'printf.c'. - -They provide a simple and small (+200 loc) printf functionality to -be used in embedded systems. - -I've found them so usefull in debugging that I do not bother with a -debugger at all. - -They are distributed in source form, so to use them, just compile them -into your project. - -Two printf variants are provided: printf and sprintf. - -The formats supported by this implementation are: 'd' 'u' 'c' 's' 'x' 'X'. - -Zero padding and field width are also supported. - -If the library is compiled with 'PRINTF_SUPPORT_LONG' defined then the -long specifier is also -supported. Note that this will pull in some long math routines (pun intended!) -and thus make your executable noticably longer. - -The memory foot print of course depends on the target cpu, compiler and -compiler options, but a rough guestimate (based on a H8S target) is about -1.4 kB for code and some twenty 'int's and 'char's, say 60 bytes of stack space. -Not too bad. Your milage may vary. By hacking the source code you can -get rid of some hunred bytes, I'm sure, but personally I feel the balance of -functionality and flexibility versus code size is close to optimal for -many embedded systems. - -To use the printf you need to supply your own character output function, -something like : - - void putc ( void* p, char c) - { - while (!SERIAL_PORT_EMPTY) ; - SERIAL_PORT_TX_REGISTER = c; - } - -Before you can call printf you need to initialize it to use your -character output function with something like: - - init_printf(NULL,putc); - -Notice the 'NULL' in 'init_printf' and the parameter 'void* p' in 'putc', -the NULL (or any pointer) you pass into the 'init_printf' will eventually be -passed to your 'putc' routine. This allows you to pass some storage space (or -anything realy) to the character output function, if necessary. -This is not often needed but it was implemented like that because it made -implementing the sprintf function so neat (look at the source code). - -The code is re-entrant, except for the 'init_printf' function, so it -is safe to call it from interupts too, although this may result in mixed output. -If you rely on re-entrancy, take care that your 'putc' function is re-entrant! - -The printf and sprintf functions are actually macros that translate to -'tfp_printf' and 'tfp_sprintf'. This makes it possible -to use them along with 'stdio.h' printf's in a single source file. -You just need to undef the names before you include the 'stdio.h'. -Note that these are not function like macros, so if you have variables -or struct members with these names, things will explode in your face. -Without variadic macros this is the best we can do to wrap these -fucnction. If it is a problem just give up the macros and use the -functions directly or rename them. - -For further details see source code. - -regs Kusti, 23.10.2004 -*/ - -#ifndef __TFP_PRINTF__ -#define __TFP_PRINTF__ - -#include <stdarg.h> - -void init_printf(void* putp, void (*putf)(void*, char)); - -int tfp_printf(const char* fmt, ...); -int tfp_sprintf(char* s, const char* fmt, ...); - -void tfp_format(void* putp, void (*putf)(void*, char), const char* fmt, va_list va); - -#define printf tfp_printf -#define sprintf tfp_sprintf - -#endif diff --git a/tmk_core/common/command.c b/tmk_core/common/command.c index ee3188646c..3cfcba3058 100644 --- a/tmk_core/common/command.c +++ b/tmk_core/common/command.c @@ -43,10 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # include "mousekey.h" #endif -#ifdef PROTOCOL_VUSB -# include "usbdrv.h" -#endif - #ifdef AUDIO_ENABLE # include "audio.h" #endif /* AUDIO_ENABLE */ diff --git a/tmk_core/common/print.h b/tmk_core/common/print.h index 04ca558109..1c77236212 100644 --- a/tmk_core/common/print.h +++ b/tmk_core/common/print.h @@ -72,9 +72,7 @@ extern "C" # elif defined(PROTOCOL_CHIBIOS) /* PROTOCOL_CHIBIOS */ -# ifndef TERMINAL_ENABLE -# include "chibios/printf.h" -# endif +# include "printf.h" // lib/printf/printf.h # ifdef USER_PRINT /* USER_PRINT */ @@ -89,7 +87,6 @@ extern "C" # define uprintf printf # else /* NORMAL PRINT */ - // Create user & normal print defines # define print(s) printf(s) # define println(s) printf(s "\r\n") diff --git a/tmk_core/protocol/arm_atsam/led_matrix.c b/tmk_core/protocol/arm_atsam/led_matrix.c index 24eab25067..4b8cc7c5e1 100644 --- a/tmk_core/protocol/arm_atsam/led_matrix.c +++ b/tmk_core/protocol/arm_atsam/led_matrix.c @@ -270,7 +270,7 @@ void flush(void) { } // This should only be performed once per frame - pomod = (float)((g_rgb_counters.tick / 10) % (uint32_t)(1000.0f / led_animation_speed)) / 10.0f * led_animation_speed; + pomod = (float)((g_rgb_timer / 10) % (uint32_t)(1000.0f / led_animation_speed)) / 10.0f * led_animation_speed; pomod *= 100.0f; pomod = (uint32_t)pomod % 10000; pomod /= 100.0f; diff --git a/tmk_core/protocol/chibios/main.c b/tmk_core/protocol/chibios/main.c index 61665eb6f4..7d32c16ed8 100644 --- a/tmk_core/protocol/chibios/main.c +++ b/tmk_core/protocol/chibios/main.c @@ -158,9 +158,6 @@ int main(void) { /* Init USB */ init_usb_driver(&USB_DRIVER); - /* init printf */ - init_printf(NULL, sendchar_pf); - #ifdef MIDI_ENABLE setup_midi(); #endif diff --git a/tmk_core/protocol/chibios/usb_main.c b/tmk_core/protocol/chibios/usb_main.c index ecc83d9ecc..65bd291bec 100644 --- a/tmk_core/protocol/chibios/usb_main.c +++ b/tmk_core/protocol/chibios/usb_main.c @@ -796,9 +796,8 @@ int8_t sendchar(uint8_t c) { } #endif /* CONSOLE_ENABLE */ -void sendchar_pf(void *p, char c) { - (void)p; - sendchar((uint8_t)c); +void _putchar(char character) { + sendchar(character); } #ifdef RAW_ENABLE diff --git a/tmk_core/protocol/chibios/usb_main.h b/tmk_core/protocol/chibios/usb_main.h index 17041b4f2f..94baf9b35e 100644 --- a/tmk_core/protocol/chibios/usb_main.h +++ b/tmk_core/protocol/chibios/usb_main.h @@ -87,6 +87,4 @@ void console_flush_output(void); #endif /* CONSOLE_ENABLE */ -void sendchar_pf(void *p, char c); - #endif /* _USB_MAIN_H_ */ diff --git a/tmk_core/protocol/iwrap.mk b/tmk_core/protocol/iwrap.mk index eeedd83af2..934235bd81 100644 --- a/tmk_core/protocol/iwrap.mk +++ b/tmk_core/protocol/iwrap.mk @@ -16,11 +16,17 @@ VPATH += $(TMK_DIR)/protocol/iwrap # V-USB # VUSB_DIR = protocol/vusb -OPT_DEFS += -DPROTOCOL_VUSB -SRC += $(VUSB_DIR)/vusb.c \ - $(VUSB_DIR)/usbdrv/usbdrv.c \ - $(VUSB_DIR)/usbdrv/usbdrvasm.S \ - $(VUSB_DIR)/usbdrv/oddebug.c -VPATH += $(TMK_DIR)/protocol/vusb:$(TMK_DIR)/protocol/vusb/usbdrv +# Path to the V-USB library +VUSB_PATH = $(LIB_PATH)/vusb + +SRC += $(VUSB_DIR)/vusb.c \ + $(VUSB_PATH)/usbdrv/usbdrv.c \ + $(VUSB_PATH)/usbdrv/usbdrvasm.S \ + $(VUSB_PATH)/usbdrv/oddebug.c +# Search Path +VPATH += $(TMK_PATH)/$(VUSB_DIR) +VPATH += $(VUSB_PATH) + +OPT_DEFS += -DPROTOCOL_VUSB diff --git a/tmk_core/protocol/iwrap/main.c b/tmk_core/protocol/iwrap/main.c index 6e9b5455b1..4048a9791d 100644 --- a/tmk_core/protocol/iwrap/main.c +++ b/tmk_core/protocol/iwrap/main.c @@ -29,7 +29,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "iwrap.h" #ifdef PROTOCOL_VUSB # include "vusb.h" -# include "usbdrv.h" +# include <usbdrv/usbdrv.h> #endif #include "uart.h" #include "suart.h" diff --git a/tmk_core/protocol/vusb.mk b/tmk_core/protocol/vusb.mk index 6df0d0d339..5e564f7480 100644 --- a/tmk_core/protocol/vusb.mk +++ b/tmk_core/protocol/vusb.mk @@ -1,13 +1,13 @@ VUSB_DIR = protocol/vusb -OPT_DEFS += -DPROTOCOL_VUSB +# Path to the V-USB library +VUSB_PATH = $(LIB_PATH)/vusb -SRC += $(VUSB_DIR)/main.c \ +SRC += $(VUSB_DIR)/main.c \ $(VUSB_DIR)/vusb.c \ - $(VUSB_DIR)/usbdrv/usbdrv.c \ - $(VUSB_DIR)/usbdrv/usbdrvasm.S \ - $(VUSB_DIR)/usbdrv/oddebug.c - + $(VUSB_PATH)/usbdrv/usbdrv.c \ + $(VUSB_PATH)/usbdrv/usbdrvasm.S \ + $(VUSB_PATH)/usbdrv/oddebug.c ifneq ($(strip $(CONSOLE_ENABLE)), yes) ifndef NO_UART @@ -18,4 +18,6 @@ endif # Search Path VPATH += $(TMK_PATH)/$(VUSB_DIR) -VPATH += $(TMK_PATH)/$(VUSB_DIR)/usbdrv +VPATH += $(VUSB_PATH) + +OPT_DEFS += -DPROTOCOL_VUSB diff --git a/tmk_core/protocol/vusb/main.c b/tmk_core/protocol/vusb/main.c index 7dc16926d2..b4063273da 100644 --- a/tmk_core/protocol/vusb/main.c +++ b/tmk_core/protocol/vusb/main.c @@ -12,8 +12,8 @@ #include <avr/wdt.h> #include <avr/sleep.h> #include <util/delay.h> -#include "usbdrv.h" -#include "oddebug.h" +#include <usbdrv/usbdrv.h> +#include <usbdrv/oddebug.h> #include "vusb.h" #include "keyboard.h" #include "host.h" diff --git a/tmk_core/protocol/vusb/sendchar_usart.c b/tmk_core/protocol/vusb/sendchar_usart.c index 42bd9ee363..a920a9a536 100644 --- a/tmk_core/protocol/vusb/sendchar_usart.c +++ b/tmk_core/protocol/vusb/sendchar_usart.c @@ -3,7 +3,7 @@ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) */ #include <stdint.h> -#include "oddebug.h" +#include <usbdrv/oddebug.h> #include "sendchar.h" #if DEBUG_LEVEL > 0 diff --git a/tmk_core/protocol/vusb/usbdrv/Changelog.txt b/tmk_core/protocol/vusb/usbdrv/Changelog.txt deleted file mode 100644 index 1e74180a9e..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/Changelog.txt +++ /dev/null @@ -1,308 +0,0 @@ -This file documents changes in the firmware-only USB driver for atmel's AVR -microcontrollers. New entries are always appended to the end of the file. -Scroll down to the bottom to see the most recent changes. - -2005-04-01: - - Implemented endpoint 1 as interrupt-in endpoint. - - Moved all configuration options to usbconfig.h which is not part of the - driver. - - Changed interface for usbVendorSetup(). - - Fixed compatibility with ATMega8 device. - - Various minor optimizations. - -2005-04-11: - - Changed interface to application: Use usbFunctionSetup(), usbFunctionRead() - and usbFunctionWrite() now. Added configuration options to choose which - of these functions to compile in. - - Assembler module delivers receive data non-inverted now. - - Made register and bit names compatible with more AVR devices. - -2005-05-03: - - Allow address of usbRxBuf on any memory page as long as the buffer does - not cross 256 byte page boundaries. - - Better device compatibility: works with Mega88 now. - - Code optimization in debugging module. - - Documentation updates. - -2006-01-02: - - Added (free) default Vendor- and Product-IDs bought from voti.nl. - - Added USBID-License.txt file which defines the rules for using the free - shared VID/PID pair. - - Added readme.txt to the usbdrv directory which clarifies administrative - issues. - -2006-01-25: - - Added "configured state" to become more standards compliant. - - Added "HALT" state for interrupt endpoint. - - Driver passes the "USB Command Verifier" test from usb.org now. - - Made "serial number" a configuration option. - - Minor optimizations, we now recommend compiler option "-Os" for best - results. - - Added a version number to usbdrv.h - -2006-02-03: - - New configuration variable USB_BUFFER_SECTION for the memory section where - the USB rx buffer will go. This defaults to ".bss" if not defined. Since - this buffer MUST NOT cross 256 byte pages (not even touch a page at the - end), the user may want to pass a linker option similar to - "-Wl,--section-start=.mybuffer=0x800060". - - Provide structure for usbRequest_t. - - New defines for USB constants. - - Prepared for HID implementations. - - Increased data size limit for interrupt transfers to 8 bytes. - - New macro usbInterruptIsReady() to query interrupt buffer state. - -2006-02-18: - - Ensure that the data token which is sent as an ack to an OUT transfer is - always zero sized. This fixes a bug where the host reports an error after - sending an out transfer to the device, although all data arrived at the - device. - - Updated docs in usbdrv.h to reflect changed API in usbFunctionWrite(). - -* Release 2006-02-20 - - - Give a compiler warning when compiling with debugging turned on. - - Added Oleg Semyonov's changes for IAR-cc compatibility. - - Added new (optional) functions usbDeviceConnect() and usbDeviceDisconnect() - (also thanks to Oleg!). - - Rearranged tests in usbPoll() to save a couple of instructions in the most - likely case that no actions are pending. - - We need a delay between the SET ADDRESS request until the new address - becomes active. This delay was handled in usbPoll() until now. Since the - spec says that the delay must not exceed 2ms, previous versions required - aggressive polling during the enumeration phase. We have now moved the - handling of the delay into the interrupt routine. - - We must not reply with NAK to a SETUP transaction. We can only achieve this - by making sure that the rx buffer is empty when SETUP tokens are expected. - We therefore don't pass zero sized data packets from the status phase of - a transfer to usbPoll(). This change MAY cause troubles if you rely on - receiving a less than 8 bytes long packet in usbFunctionWrite() to - identify the end of a transfer. usbFunctionWrite() will NEVER be called - with a zero length. - -* Release 2006-03-14 - - - Improved IAR C support: tiny memory model, more devices - - Added template usbconfig.h file under the name usbconfig-prototype.h - -* Release 2006-03-26 - - - Added provision for one more interrupt-in endpoint (endpoint 3). - - Added provision for one interrupt-out endpoint (endpoint 1). - - Added flowcontrol macros for USB. - - Added provision for custom configuration descriptor. - - Allow ANY two port bits for D+ and D-. - - Merged (optional) receive endpoint number into global usbRxToken variable. - - Use USB_CFG_IOPORTNAME instead of USB_CFG_IOPORT. We now construct the - variable name from the single port letter instead of computing the address - of related ports from the output-port address. - -* Release 2006-06-26 - - - Updated documentation in usbdrv.h and usbconfig-prototype.h to reflect the - new features. - - Removed "#warning" directives because IAR does not understand them. Use - unused static variables instead to generate a warning. - - Do not include <avr/io.h> when compiling with IAR. - - Introduced USB_CFG_DESCR_PROPS_* in usbconfig.h to configure how each - USB descriptor should be handled. It is now possible to provide descriptor - data in Flash, RAM or dynamically at runtime. - - STALL is now a status in usbTxLen* instead of a message. We can now conform - to the spec and leave the stall status pending until it is cleared. - - Made usbTxPacketCnt1 and usbTxPacketCnt3 public. This allows the - application code to reset data toggling on interrupt pipes. - -* Release 2006-07-18 - - - Added an #if !defined __ASSEMBLER__ to the warning in usbdrv.h. This fixes - an assembler error. - - usbDeviceDisconnect() takes pull-up resistor to high impedance now. - -* Release 2007-02-01 - - - Merged in some code size improvements from usbtiny (thanks to Dick - Streefland for these optimizations!) - - Special alignment requirement for usbRxBuf not required any more. Thanks - again to Dick Streefland for this hint! - - Reverted to "#warning" instead of unused static variables -- new versions - of IAR CC should handle this directive. - - Changed Open Source license to GNU GPL v2 in order to make linking against - other free libraries easier. We no longer require publication of the - circuit diagrams, but we STRONGLY encourage it. If you improve the driver - itself, PLEASE grant us a royalty free license to your changes for our - commercial license. - -* Release 2007-03-29 - - - New configuration option "USB_PUBLIC" in usbconfig.h. - - Set USB version number to 1.10 instead of 1.01. - - Code used USB_CFG_DESCR_PROPS_STRING_DEVICE and - USB_CFG_DESCR_PROPS_STRING_PRODUCT inconsistently. Changed all occurrences - to USB_CFG_DESCR_PROPS_STRING_PRODUCT. - - New assembler module for 16.5 MHz RC oscillator clock with PLL in receiver - code. - - New assembler module for 16 MHz crystal. - - usbdrvasm.S contains common code only, clock-specific parts have been moved - to usbdrvasm12.S, usbdrvasm16.S and usbdrvasm165.S respectively. - -* Release 2007-06-25 - - - 16 MHz module: Do SE0 check in stuffed bits as well. - -* Release 2007-07-07 - - - Define hi8(x) for IAR compiler to limit result to 8 bits. This is necessary - for negative values. - - Added 15 MHz module contributed by V. Bosch. - - Interrupt vector name can now be configured. This is useful if somebody - wants to use a different hardware interrupt than INT0. - -* Release 2007-08-07 - - - Moved handleIn3 routine in usbdrvasm16.S so that relative jump range is - not exceeded. - - More config options: USB_RX_USER_HOOK(), USB_INITIAL_DATATOKEN, - USB_COUNT_SOF - - USB_INTR_PENDING can now be a memory address, not just I/O - -* Release 2007-09-19 - - - Split out common parts of assembler modules into separate include file - - Made endpoint numbers configurable so that given interface definitions - can be matched. See USB_CFG_EP3_NUMBER in usbconfig-prototype.h. - - Store endpoint number for interrupt/bulk-out so that usbFunctionWriteOut() - can handle any number of endpoints. - - Define usbDeviceConnect() and usbDeviceDisconnect() even if no - USB_CFG_PULLUP_IOPORTNAME is defined. Directly set D+ and D- to 0 in this - case. - -* Release 2007-12-01 - - - Optimize usbDeviceConnect() and usbDeviceDisconnect() for less code size - when USB_CFG_PULLUP_IOPORTNAME is not defined. - -* Release 2007-12-13 - - - Renamed all include-only assembler modules from *.S to *.inc so that - people don't add them to their project sources. - - Distribute leap bits in tx loop more evenly for 16 MHz module. - - Use "macro" and "endm" instead of ".macro" and ".endm" for IAR - - Avoid compiler warnings for constant expr range by casting some values in - USB descriptors. - -* Release 2008-01-21 - - - Fixed bug in 15 and 16 MHz module where the new address set with - SET_ADDRESS was already accepted at the next NAK or ACK we send, not at - the next data packet we send. This caused problems when the host polled - too fast. Thanks to Alexander Neumann for his help and patience debugging - this issue! - -* Release 2008-02-05 - - - Fixed bug in 16.5 MHz module where a register was used in the interrupt - handler before it was pushed. This bug was introduced with version - 2007-09-19 when common parts were moved to a separate file. - - Optimized CRC routine (thanks to Reimar Doeffinger). - -* Release 2008-02-16 - - - Removed outdated IAR compatibility stuff (code sections). - - Added hook macros for USB_RESET_HOOK() and USB_SET_ADDRESS_HOOK(). - - Added optional routine usbMeasureFrameLength() for calibration of the - internal RC oscillator. - -* Release 2008-02-28 - - - USB_INITIAL_DATATOKEN defaults to USBPID_DATA1 now, which means that we - start with sending USBPID_DATA0. - - Changed defaults in usbconfig-prototype.h - - Added free USB VID/PID pair for MIDI class devices - - Restructured AVR-USB as separate package, not part of PowerSwitch any more. - -* Release 2008-04-18 - - - Restructured usbdrv.c so that it is easier to read and understand. - - Better code optimization with gcc 4. - - If a second interrupt in endpoint is enabled, also add it to config - descriptor. - - Added config option for long transfers (above 254 bytes), see - USB_CFG_LONG_TRANSFERS in usbconfig.h. - - Added 20 MHz module contributed by Jeroen Benschop. - -* Release 2008-05-13 - - - Fixed bug in libs-host/hiddata.c function usbhidGetReport(): length - was not incremented, pointer to length was incremented instead. - - Added code to command line tool(s) which claims an interface. This code - is disabled by default, but may be necessary on newer Linux kernels. - - Added usbconfig.h option "USB_CFG_CHECK_DATA_TOGGLING". - - New header "usbportability.h" prepares ports to other development - environments. - - Long transfers (above 254 bytes) did not work when usbFunctionRead() was - used to supply the data. Fixed this bug. [Thanks to Alexander Neumann!] - - In hiddata.c (example code for sending/receiving data over HID), use - USB_RECIP_DEVICE instead of USB_RECIP_INTERFACE for control transfers so - that we need not claim the interface. - - in usbPoll() loop 20 times polling for RESET state instead of 10 times. - This accounts for the higher clock rates we now support. - - Added a module for 12.8 MHz RC oscillator with PLL in receiver loop. - - Added hook to SOF code so that oscillator can be tuned to USB frame clock. - - Added timeout to waitForJ loop. Helps preventing unexpected hangs. - - Added example code for oscillator tuning to libs-device (thanks to - Henrik Haftmann for the idea to this routine). - - Implemented option USB_CFG_SUPPRESS_INTR_CODE. - -* Release 2008-10-22 - - - Fixed libs-device/osctune.h: OSCCAL is memory address on ATMega88 and - similar, not offset of 0x20 needs to be added. - - Allow distribution under GPLv3 for those who have to link against other - code distributed under GPLv3. - -* Release 2008-11-26 - - - Removed libusb-win32 dependency for hid-data example in Makefile.windows. - It was never required and confused many people. - - Added extern uchar usbRxToken to usbdrv.h. - - Integrated a module with CRC checks at 18 MHz by Lukas Schrittwieser. - -* Release 2009-03-23 - - - Hid-mouse example used settings from hid-data example, fixed that. - - Renamed project to V-USB due to a trademark issue with Atmel(r). - - Changed CommercialLicense.txt and USBID-License.txt to make the - background of USB ID registration clearer. - -* Release 2009-04-15 - - - Changed CommercialLicense.txt to reflect the new range of PIDs from - Jason Kotzin. - - Removed USBID-License.txt in favor of USB-IDs-for-free.txt and - USB-ID-FAQ.txt - - Fixed a bug in the 12.8 MHz module: End Of Packet decection was made in - the center between bit 0 and 1 of each byte. This is where the data lines - are expected to change and the sampled data may therefore be nonsense. - We therefore check EOP ONLY if bits 0 AND 1 have both been read as 0 on D-. - - Fixed a bitstuffing problem in the 16 MHz module: If bit 6 was stuffed, - the unstuffing code in the receiver routine was 1 cycle too long. If - multiple bytes had the unstuffing in bit 6, the error summed up until the - receiver was out of sync. - - Included option for faster CRC routine. - Thanks to Slawomir Fras (BoskiDialer) for this code! - - Updated bits in Configuration Descriptor's bmAttributes according to - USB 1.1 (in particular bit 7, it is a must-be-set bit now). - -* Release 2009-08-22 - - - Moved first DBG1() after odDebugInit() in all examples. - - Use vector INT0_vect instead of SIG_INTERRUPT0 if defined. This makes - V-USB compatible with the new "p" suffix devices (e.g. ATMega328p). - - USB_CFG_CLOCK_KHZ setting is now required in usbconfig.h (no default any - more). - - New option USB_CFG_DRIVER_FLASH_PAGE allows boot loaders on devices with - more than 64 kB flash. - - Built-in configuration descriptor allows custom definition for second - endpoint now. - -* Release 2010-07-15 diff --git a/tmk_core/protocol/vusb/usbdrv/CommercialLicense.txt b/tmk_core/protocol/vusb/usbdrv/CommercialLicense.txt deleted file mode 100644 index 11d07d9df0..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/CommercialLicense.txt +++ /dev/null @@ -1,166 +0,0 @@ -V-USB Driver Software License Agreement -Version 2009-08-03 - -THIS LICENSE AGREEMENT GRANTS YOU CERTAIN RIGHTS IN A SOFTWARE. YOU CAN -ENTER INTO THIS AGREEMENT AND ACQUIRE THE RIGHTS OUTLINED BELOW BY PAYING -THE AMOUNT ACCORDING TO SECTION 4 ("PAYMENT") TO OBJECTIVE DEVELOPMENT. - - -1 DEFINITIONS - -1.1 "OBJECTIVE DEVELOPMENT" shall mean OBJECTIVE DEVELOPMENT Software GmbH, -Grosse Schiffgasse 1A/7, 1020 Wien, AUSTRIA. - -1.2 "You" shall mean the Licensee. - -1.3 "V-USB" shall mean all files included in the package distributed under -the name "vusb" by OBJECTIVE DEVELOPMENT (http://www.obdev.at/vusb/) -unless otherwise noted. This includes the firmware-only USB device -implementation for Atmel AVR microcontrollers, some simple device examples -and host side software examples and libraries. - - -2 LICENSE GRANTS - -2.1 Source Code. OBJECTIVE DEVELOPMENT shall furnish you with the source -code of V-USB. - -2.2 Distribution and Use. OBJECTIVE DEVELOPMENT grants you the -non-exclusive right to use, copy and distribute V-USB with your hardware -product(s), restricted by the limitations in section 3 below. - -2.3 Modifications. OBJECTIVE DEVELOPMENT grants you the right to modify -the source code and your copy of V-USB according to your needs. - -2.4 USB IDs. OBJECTIVE DEVELOPMENT furnishes you with one or two USB -Product ID(s), sent to you in e-mail. These Product IDs are reserved -exclusively for you. OBJECTIVE DEVELOPMENT has obtained USB Product ID -ranges under the Vendor ID 5824 from Wouter van Ooijen (Van Ooijen -Technische Informatica, www.voti.nl) and under the Vendor ID 8352 from -Jason Kotzin (Clay Logic, www.claylogic.com). Both owners of the Vendor IDs -have obtained these IDs from the USB Implementers Forum, Inc. -(www.usb.org). OBJECTIVE DEVELOPMENT disclaims all liability which might -arise from the assignment of USB IDs. - -2.5 USB Certification. Although not part of this agreement, we want to make -it clear that you cannot become USB certified when you use V-USB or a USB -Product ID assigned by OBJECTIVE DEVELOPMENT. AVR microcontrollers don't -meet the electrical specifications required by the USB specification and -the USB Implementers Forum certifies only members who bought a Vendor ID of -their own. - - -3 LICENSE RESTRICTIONS - -3.1 Number of Units. Only one of the following three definitions is -applicable. Which one is determined by the amount you pay to OBJECTIVE -DEVELOPMENT, see section 4 ("Payment") below. - -Hobby License: You may use V-USB according to section 2 above in no more -than 5 hardware units. These units must not be sold for profit. - -Entry Level License: You may use V-USB according to section 2 above in no -more than 150 hardware units. - -Professional License: You may use V-USB according to section 2 above in -any number of hardware units, except for large scale production ("unlimited -fair use"). Quantities below 10,000 units are not considered large scale -production. If your reach quantities which are obviously large scale -production, you must pay a license fee of 0.10 EUR per unit for all units -above 10,000. - -3.2 Rental. You may not rent, lease, or lend V-USB or otherwise encumber -any copy of V-USB, or any of the rights granted herein. - -3.3 Transfer. You may not transfer your rights under this Agreement to -another party without OBJECTIVE DEVELOPMENT's prior written consent. If -such consent is obtained, you may permanently transfer this License to -another party. The recipient of such transfer must agree to all terms and -conditions of this Agreement. - -3.4 Reservation of Rights. OBJECTIVE DEVELOPMENT retains all rights not -expressly granted. - -3.5 Non-Exclusive Rights. Your license rights under this Agreement are -non-exclusive. - -3.6 Third Party Rights. This Agreement cannot grant you rights controlled -by third parties. In particular, you are not allowed to use the USB logo or -other trademarks owned by the USB Implementers Forum, Inc. without their -consent. Since such consent depends on USB certification, it should be -noted that V-USB will not pass certification because it does not -implement checksum verification and the microcontroller ports do not meet -the electrical specifications. - - -4 PAYMENT - -The payment amount depends on the variation of this agreement (according to -section 3.1) into which you want to enter. Concrete prices are listed on -OBJECTIVE DEVELOPMENT's web site, usually at -http://www.obdev.at/vusb/license.html. You agree to pay the amount listed -there to OBJECTIVE DEVELOPMENT or OBJECTIVE DEVELOPMENT's payment processor -or reseller. - - -5 COPYRIGHT AND OWNERSHIP - -V-USB is protected by copyright laws and international copyright -treaties, as well as other intellectual property laws and treaties. V-USB -is licensed, not sold. - - -6 TERM AND TERMINATION - -6.1 Term. This Agreement shall continue indefinitely. However, OBJECTIVE -DEVELOPMENT may terminate this Agreement and revoke the granted license and -USB-IDs if you fail to comply with any of its terms and conditions. - -6.2 Survival of Terms. All provisions regarding secrecy, confidentiality -and limitation of liability shall survive termination of this agreement. - - -7 DISCLAIMER OF WARRANTY AND LIABILITY - -LIMITED WARRANTY. V-USB IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY -KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, OBJECTIVE -DEVELOPMENT AND ITS SUPPLIERS HEREBY DISCLAIM ALL WARRANTIES, EITHER -EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND -NON-INFRINGEMENT, WITH REGARD TO V-USB, AND THE PROVISION OF OR FAILURE -TO PROVIDE SUPPORT SERVICES. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL -RIGHTS. YOU MAY HAVE OTHERS, WHICH VARY FROM STATE/JURISDICTION TO -STATE/JURISDICTION. - -LIMITATION OF LIABILITY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, -IN NO EVENT SHALL OBJECTIVE DEVELOPMENT OR ITS SUPPLIERS BE LIABLE FOR ANY -SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER -(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, -BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY -LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE V-USB OR THE -PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES, EVEN IF OBJECTIVE -DEVELOPMENT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY -CASE, OBJECTIVE DEVELOPMENT'S ENTIRE LIABILITY UNDER ANY PROVISION OF THIS -AGREEMENT SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR V-USB. - - -8 MISCELLANEOUS TERMS - -8.1 Marketing. OBJECTIVE DEVELOPMENT has the right to mention for marketing -purposes that you entered into this agreement. - -8.2 Entire Agreement. This document represents the entire agreement between -OBJECTIVE DEVELOPMENT and you. It may only be modified in writing signed by -an authorized representative of both, OBJECTIVE DEVELOPMENT and you. - -8.3 Severability. In case a provision of these terms and conditions should -be or become partly or entirely invalid, ineffective, or not executable, -the validity of all other provisions shall not be affected. - -8.4 Applicable Law. This agreement is governed by the laws of the Republic -of Austria. - -8.5 Responsible Courts. The responsible courts in Vienna/Austria will have -exclusive jurisdiction regarding all disputes in connection with this -agreement. - diff --git a/tmk_core/protocol/vusb/usbdrv/License.txt b/tmk_core/protocol/vusb/usbdrv/License.txt deleted file mode 100644 index ce4c3aed45..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/License.txt +++ /dev/null @@ -1,361 +0,0 @@ -OBJECTIVE DEVELOPMENT GmbH's V-USB driver software is distributed under the -terms and conditions of the GNU GPL version 2 or the GNU GPL version 3. It is -your choice whether you apply the terms of version 2 or version 3. The full -text of GPLv2 is included below. In addition to the requirements in the GPL, -we STRONGLY ENCOURAGE you to do the following: - -(1) Publish your entire project on a web site and drop us a note with the URL. -Use the form at http://www.obdev.at/vusb/feedback.html for your submission. - -(2) Adhere to minimum publication standards. Please include AT LEAST: - - a circuit diagram in PDF, PNG or GIF format - - full source code for the host software - - a readme.txt file in ASCII format which describes the purpose of the - project and what can be found in which directories and which files - - a reference to http://www.obdev.at/vusb/ - -(3) If you improve the driver firmware itself, please give us a free license -to your modifications for our commercial license offerings. - - - - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Library General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -convey the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - <one line to give the program's name and a brief idea of what it does.> - Copyright (C) <year> <name of author> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - -Also add information on how to contact you by electronic and paper mail. - -If the program is interactive, make it output a short notice like this -when it starts in an interactive mode: - - Gnomovision version 69, Copyright (C) year name of author - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, the commands you use may -be called something other than `show w' and `show c'; they could even be -mouse-clicks or menu items--whatever suits your program. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. Here is a sample; alter the names: - - Yoyodyne, Inc., hereby disclaims all copyright interest in the program - `Gnomovision' (which makes passes at compilers) written by James Hacker. - - <signature of Ty Coon>, 1 April 1989 - Ty Coon, President of Vice - -This General Public License does not permit incorporating your program into -proprietary programs. If your program is a subroutine library, you may -consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Library General -Public License instead of this License. diff --git a/tmk_core/protocol/vusb/usbdrv/Readme.txt b/tmk_core/protocol/vusb/usbdrv/Readme.txt deleted file mode 100644 index 3cff49f6fa..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/Readme.txt +++ /dev/null @@ -1,172 +0,0 @@ -This is the readme file to Objective Development's firmware-only USB driver -for Atmel AVR microcontrollers. For more information please visit -http://www.obdev.at/vusb/ - -This directory contains the USB firmware only. Copy it as-is to your own -project and add all .c and .S files to your project (these files are marked -with an asterisk in the list below). Then copy usbconfig-prototype.h as -usbconfig.h to your project and edit it according to your configuration. - - -TECHNICAL DOCUMENTATION -======================= -The technical documentation (API) for the firmware driver is contained in the -file "usbdrv.h". Please read all of it carefully! Configuration options are -documented in "usbconfig-prototype.h". - -The driver consists of the following files: - readme.txt ............. The file you are currently reading. - Changelog.txt .......... Release notes for all versions of the driver. - usbdrv.h ............... Driver interface definitions and technical docs. -* usbdrv.c ............... High level language part of the driver. Link this - module to your code! -* usbdrvasm.S ............ Assembler part of the driver. This module is mostly - a stub and includes one of the usbdrvasm*.S files - depending on processor clock. Link this module to - your code! - usbdrvasm*.inc ......... Assembler routines for particular clock frequencies. - Included by usbdrvasm.S, don't link it directly! - asmcommon.inc .......... Common assembler routines. Included by - usbdrvasm*.inc, don't link it directly! - usbconfig-prototype.h .. Prototype for your own usbdrv.h file. -* oddebug.c .............. Debug functions. Only used when DEBUG_LEVEL is - defined to a value greater than 0. Link this module - to your code! - oddebug.h .............. Interface definitions of the debug module. - usbportability.h ....... Header with compiler-dependent stuff. - usbdrvasm.asm .......... Compatibility stub for IAR-C-compiler. Use this - module instead of usbdrvasm.S when you assembler - with IAR's tools. - License.txt ............ Open Source license for this driver. - CommercialLicense.txt .. Optional commercial license for this driver. - USB-ID-FAQ.txt ......... General infos about USB Product- and Vendor-IDs. - USB-IDs-for-free.txt ... List and terms of use for free shared PIDs. - -(*) ... These files should be linked to your project. - - -CPU CORE CLOCK FREQUENCY -======================== -We supply assembler modules for clock frequencies of 12 MHz, 12.8 MHz, 15 MHz, -16 MHz, 16.5 MHz 18 MHz and 20 MHz. Other clock rates are not supported. The -actual clock rate must be configured in usbconfig.h. - -12 MHz Clock -This is the traditional clock rate of V-USB because it's the lowest clock -rate where the timing constraints of the USB spec can be met. - -15 MHz Clock -Similar to 12 MHz, but some NOPs inserted. On the other hand, the higher clock -rate allows for some loops which make the resulting code size somewhat smaller -than the 12 MHz version. - -16 MHz Clock -This clock rate has been added for users of the Arduino board and other -ready-made boards which come with a fixed 16 MHz crystal. It's also an option -if you need the slightly higher clock rate for performance reasons. Since -16 MHz is not divisible by the USB low speed bit clock of 1.5 MHz, the code -is somewhat tricky and has to insert a leap cycle every third byte. - -12.8 MHz and 16.5 MHz Clock -The assembler modules for these clock rates differ from the other modules -because they have been built for an RC oscillator with only 1% precision. The -receiver code inserts leap cycles to compensate for clock deviations. 1% is -also the precision which can be achieved by calibrating the internal RC -oscillator of the AVR. Please note that only AVRs with internal 64 MHz PLL -oscillator can reach 16.5 MHz with the RC oscillator. This includes the very -popular ATTiny25, ATTiny45, ATTiny85 series as well as the ATTiny26. Almost -all AVRs can reach 12.8 MHz, although this is outside the specified range. - -See the EasyLogger example at http://www.obdev.at/vusb/easylogger.html for -code which calibrates the RC oscillator based on the USB frame clock. - -18 MHz Clock -This module is closer to the USB specification because it performs an on the -fly CRC check for incoming packets. Packets with invalid checksum are -discarded as required by the spec. If you also implement checks for data -PID toggling on application level (see option USB_CFG_CHECK_DATA_TOGGLING -in usbconfig.h for more info), this ensures data integrity. Due to the CRC -tables and alignment requirements, this code is bigger than modules for other -clock rates. To activate this module, you must define USB_CFG_CHECK_CRC to 1 -and USB_CFG_CLOCK_KHZ to 18000 in usbconfig.h. - -20 MHz Clock -This module is for people who won't do it with less than the maximum. Since -20 MHz is not divisible by the USB low speed bit clock of 1.5 MHz, the code -uses similar tricks as the 16 MHz module to insert leap cycles. - - -USB IDENTIFIERS -=============== -Every USB device needs a vendor- and a product-identifier (VID and PID). VIDs -are obtained from usb.org for a price of 1,500 USD. Once you have a VID, you -can assign PIDs at will. - -Since an entry level cost of 1,500 USD is too high for most small companies -and hobbyists, we provide some VID/PID pairs for free. See the file -USB-IDs-for-free.txt for details. - -Objective Development also has some license offerings which include product -IDs. See http://www.obdev.at/vusb/ for details. - - -DEVELOPMENT SYSTEM -================== -This driver has been developed and optimized for the GNU compiler version 3 -and 4. We recommend that you use the GNU compiler suite because it is freely -available. V-USB has also been ported to the IAR compiler and assembler. It -has been tested with IAR 4.10B/W32 and 4.12A/W32 on an ATmega8 with the -"small" and "tiny" memory model. Not every release is tested with IAR CC and -the driver may therefore fail to compile with IAR. Please note that gcc is -more efficient for usbdrv.c because this module has been deliberately -optimized for gcc. - -Gcc version 3 produces smaller code than version 4 due to new optimizing -capabilities which don't always improve things on 8 bit CPUs. The code size -generated by gcc 4 can be reduced with the compiler options --fno-move-loop-invariants, -fno-tree-scev-cprop and --fno-inline-small-functions in addition to -Os. On devices with more than -8k of flash memory, we also recommend the linker option --relax (written as --Wl,--relax for gcc) to convert absolute calls into relative where possible. - -For more information about optimizing options see: - - http://www.tty1.net/blog/2008-04-29-avr-gcc-optimisations_en.html - -These optimizations are good for gcc 4.x. Version 3.x of gcc does not support -most of these options and produces good code anyway. - - -USING V-USB FOR FREE -==================== -The AVR firmware driver is published under the GNU General Public License -Version 2 (GPL2) and the GNU General Public License Version 3 (GPL3). It is -your choice whether you apply the terms of version 2 or version 3. - -If you decide for the free GPL2 or GPL3, we STRONGLY ENCOURAGE you to do the -following things IN ADDITION to the obligations from the GPL: - -(1) Publish your entire project on a web site and drop us a note with the URL. -Use the form at http://www.obdev.at/vusb/feedback.html for your submission. -If you don't have a web site, you can publish the project in obdev's -documentation wiki at -http://www.obdev.at/goto.php?t=vusb-wiki&p=hosted-projects. - -(2) Adhere to minimum publication standards. Please include AT LEAST: - - a circuit diagram in PDF, PNG or GIF format - - full source code for the host software - - a readme.txt file in ASCII format which describes the purpose of the - project and what can be found in which directories and which files - - a reference to http://www.obdev.at/vusb/ - -(3) If you improve the driver firmware itself, please give us a free license -to your modifications for our commercial license offerings. - - -COMMERCIAL LICENSES FOR V-USB -============================= -If you don't want to publish your source code under the terms of the GPL, -you can simply pay money for V-USB. As an additional benefit you get -USB PIDs for free, reserved exclusively to you. See the file -"CommercialLicense.txt" for details. - diff --git a/tmk_core/protocol/vusb/usbdrv/USB-ID-FAQ.txt b/tmk_core/protocol/vusb/usbdrv/USB-ID-FAQ.txt deleted file mode 100644 index d1de8fb618..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/USB-ID-FAQ.txt +++ /dev/null @@ -1,149 +0,0 @@ -Version 2009-08-22 - -========================== -WHY DO WE NEED THESE IDs? -========================== - -USB is more than a low level protocol for data transport. It also defines a -common set of requests which must be understood by all devices. And as part -of these common requests, the specification defines data structures, the -USB Descriptors, which are used to describe the properties of the device. - -From the perspective of an operating system, it is therefore possible to find -out basic properties of a device (such as e.g. the manufacturer and the name -of the device) without a device-specific driver. This is essential because -the operating system can choose a driver to load based on this information -(Plug-And-Play). - -Among the most important properties in the Device Descriptor are the USB -Vendor- and Product-ID. Both are 16 bit integers. The most simple form of -driver matching is based on these IDs. The driver announces the Vendor- and -Product-IDs of the devices it can handle and the operating system loads the -appropriate driver when the device is connected. - -It is obvious that this technique only works if the pair Vendor- plus -Product-ID is unique: Only devices which require the same driver can have the -same pair of IDs. - - -===================================================== -HOW DOES THE USB STANDARD ENSURE THAT IDs ARE UNIQUE? -===================================================== - -Since it is so important that USB IDs are unique, the USB Implementers Forum, -Inc. (usb.org) needs a way to enforce this legally. It is not forbidden by -law to build a device and assign it any random numbers as IDs. Usb.org -therefore needs an agreement to regulate the use of USB IDs. The agreement -binds only parties who agreed to it, of course. Everybody else is free to use -any numbers for their IDs. - -So how can usb.org ensure that every manufacturer of USB devices enters into -an agreement with them? They do it via trademark licensing. Usb.org has -registered the trademark "USB", all associated logos and related terms. If -you want to put an USB logo on your product or claim that it is USB -compliant, you must license these trademarks from usb.org. And this is where -you enter into an agreement. See the "USB-IF Trademark License Agreement and -Usage Guidelines for the USB-IF Logo" at -http://www.usb.org/developers/logo_license/. - -Licensing the USB trademarks requires that you buy a USB Vendor-ID from -usb.org (one-time fee of ca. 2,000 USD), that you become a member of usb.org -(yearly fee of ca. 4,000 USD) and that you meet all the technical -specifications from the USB spec. - -This means that most hobbyists and small companies will never be able to -become USB compliant, just because membership is so expensive. And you can't -be compliant with a driver based on V-USB anyway, because the AVR's port pins -don't meet the electrical specifications for USB. So, in principle, all -hobbyists and small companies are free to choose any random numbers for their -IDs. They have nothing to lose... - -There is one exception worth noting, though: If you use a sub-component which -implements USB, the vendor of the sub-components may guarantee USB -compliance. This might apply to some or all of FTDI's solutions. - - -======================================================================= -WHY SHOULD YOU OBTAIN USB IDs EVEN IF YOU DON'T LICENSE USB TRADEMARKS? -======================================================================= - -You have learned in the previous section that you are free to choose any -numbers for your IDs anyway. So why not do exactly this? There is still the -technical issue. If you choose IDs which are already in use by somebody else, -operating systems will load the wrong drivers and your device won't work. -Even if you choose IDs which are not currently in use, they may be in use in -the next version of the operating system or even after an automatic update. - -So what you need is a pair of Vendor- and Product-IDs for which you have the -guarantee that no USB compliant product uses them. This implies that no -operating system will ever ship with drivers responsible for these IDs. - - -============================================== -HOW DOES OBJECTIVE DEVELOPMENT HANDLE USB IDs? -============================================== - -Objective Development gives away pairs of USB-IDs with their V-USB licenses. -In order to ensure that these IDs are unique, Objective Development has an -agreement with the company/person who has bought the USB Vendor-ID from -usb.org. This agreement ensures that a range of USB Product-IDs is reserved -for assignment by Objective Development and that the owner of the Vendor-ID -won't give it to anybody else. - -This means that you have to trust three parties to ensure uniqueness of -your IDs: - - - Objective Development, that they don't give the same PID to more than - one person. - - The owner of the Vendor-ID that they don't assign PIDs from the range - assigned to Objective Development to anybody else. - - Usb.org that they don't assign the same Vendor-ID a second time. - - -================================== -WHO IS THE OWNER OF THE VENDOR-ID? -================================== - -Objective Development has obtained ranges of USB Product-IDs under two -Vendor-IDs: Under Vendor-ID 5824 from Wouter van Ooijen (Van Ooijen -Technische Informatica, www.voti.nl) and under Vendor-ID 8352 from Jason -Kotzin (Clay Logic, www.claylogic.com). Both VID owners have received their -Vendor-ID directly from usb.org. - - -========================================================================= -CAN I USE USB-IDs FROM OBJECTIVE DEVELOPMENT WITH OTHER DRIVERS/HARDWARE? -========================================================================= - -The short answer is: Yes. All you get is a guarantee that the IDs are never -assigned to anybody else. What more do you need? - - -============================ -WHAT ABOUT SHARED ID PAIRS? -============================ - -Objective Development has reserved some PID/VID pairs for shared use. You -have no guarantee of uniqueness for them, except that no USB compliant device -uses them. In order to avoid technical problems, we must ensure that all -devices with the same pair of IDs use the same driver on kernel level. For -details, see the file USB-IDs-for-free.txt. - - -====================================================== -I HAVE HEARD THAT SUB-LICENSING OF USB-IDs IS ILLEGAL? -====================================================== - -A 16 bit integer number cannot be protected by copyright laws. It is not -sufficiently complex. And since none of the parties involved entered into the -USB-IF Trademark License Agreement, we are not bound by this agreement. So -there is no reason why it should be illegal to sub-license USB-IDs. - - -============================================= -WHO IS LIABLE IF THERE ARE INCOMPATIBILITIES? -============================================= - -Objective Development disclaims all liabilities which might arise from the -assignment of IDs. If you guarantee product features to your customers -without proper disclaimer, YOU are liable for that. diff --git a/tmk_core/protocol/vusb/usbdrv/USB-IDs-for-free.txt b/tmk_core/protocol/vusb/usbdrv/USB-IDs-for-free.txt deleted file mode 100644 index 2f4d59ad18..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/USB-IDs-for-free.txt +++ /dev/null @@ -1,148 +0,0 @@ -Version 2009-08-22 - -=========================== -FREE USB-IDs FOR SHARED USE -=========================== - -Objective Development has reserved a set of USB Product-IDs for use according -to the guidelines outlined below. For more information about the concept of -USB IDs please see the file USB-ID-FAQ.txt. Objective Development guarantees -that the IDs listed below are not used by any USB compliant devices. - - -==================== -MECHANISM OF SHARING -==================== - -From a technical point of view, two different devices can share the same USB -Vendor- and Product-ID if they require the same driver on operating system -level. We make use of this fact by assigning separate IDs for various device -classes. On application layer, devices must be distinguished by their textual -name or serial number. We offer separate sets of IDs for discrimination by -textual name and for serial number. - -Examples for shared use of USB IDs are included with V-USB in the "examples" -subdirectory. - - -====================================== -IDs FOR DISCRIMINATION BY TEXTUAL NAME -====================================== - -If you use one of the IDs listed below, your device and host-side software -must conform to these rules: - -(1) The USB device MUST provide a textual representation of the manufacturer -and product identification. The manufacturer identification MUST be available -at least in USB language 0x0409 (English/US). - -(2) The textual manufacturer identification MUST contain either an Internet -domain name (e.g. "mycompany.com") registered and owned by you, or an e-mail -address under your control (e.g. "myname@gmx.net"). You can embed the domain -name or e-mail address in any string you like, e.g. "Objective Development -http://www.obdev.at/vusb/". - -(3) You are responsible for retaining ownership of the domain or e-mail -address for as long as any of your products are in use. - -(4) You may choose any string for the textual product identification, as long -as this string is unique within the scope of your textual manufacturer -identification. - -(5) Application side device look-up MUST be based on the textual manufacturer -and product identification in addition to VID/PID matching. The driver -matching MUST be a comparison of the entire strings, NOT a sub-string match. - -(6) For devices which implement a particular USB device class (e.g. HID), the -operating system's default class driver MUST be used. If an operating system -driver for Vendor Class devices is needed, this driver must be libusb or -libusb-win32 (see http://libusb.org/ and -http://libusb-win32.sourceforge.net/). - -Table if IDs for discrimination by textual name: - -PID dec (hex) | VID dec (hex) | Description of use -==============+===============+============================================ -1500 (0x05dc) | 5824 (0x16c0) | For Vendor Class devices with libusb ---------------+---------------+-------------------------------------------- -1503 (0x05df) | 5824 (0x16c0) | For generic HID class devices (which are - | | NOT mice, keyboards or joysticks) ---------------+---------------+-------------------------------------------- -1505 (0x05e1) | 5824 (0x16c0) | For CDC-ACM class devices (modems) ---------------+---------------+-------------------------------------------- -1508 (0x05e4) | 5824 (0x16c0) | For MIDI class devices ---------------+---------------+-------------------------------------------- - -Note that Windows caches the textual product- and vendor-description for -mice, keyboards and joysticks. Name-bsed discrimination is therefore not -recommended for these device classes. - - -======================================= -IDs FOR DISCRIMINATION BY SERIAL NUMBER -======================================= - -If you use one of the IDs listed below, your device and host-side software -must conform to these rules: - -(1) The USB device MUST provide a textual representation of the serial -number. The serial number string MUST be available at least in USB language -0x0409 (English/US). - -(2) The serial number MUST start with either an Internet domain name (e.g. -"mycompany.com") registered and owned by you, or an e-mail address under your -control (e.g. "myname@gmx.net"), both terminated with a colon (":") character. -You MAY append any string you like for further discrimination of your devices. - -(3) You are responsible for retaining ownership of the domain or e-mail -address for as long as any of your products are in use. - -(5) Application side device look-up MUST be based on the serial number string -in addition to VID/PID matching. The matching must start at the first -character of the serial number string and include the colon character -terminating your domain or e-mail address. It MAY stop anywhere after that. - -(6) For devices which implement a particular USB device class (e.g. HID), the -operating system's default class driver MUST be used. If an operating system -driver for Vendor Class devices is needed, this driver must be libusb or -libusb-win32 (see http://libusb.org/ and -http://libusb-win32.sourceforge.net/). - -Table if IDs for discrimination by serial number string: - -PID dec (hex) | VID dec (hex) | Description of use -===============+===============+=========================================== -10200 (0x27d8) | 5824 (0x16c0) | For Vendor Class devices with libusb ----------------+---------------+------------------------------------------- -10201 (0x27d9) | 5824 (0x16c0) | For generic HID class devices (which are - | | NOT mice, keyboards or joysticks) ----------------+---------------+------------------------------------------- -10202 (0x27da) | 5824 (0x16c0) | For USB Mice ----------------+---------------+------------------------------------------- -10203 (0x27db) | 5824 (0x16c0) | For USB Keyboards ----------------+---------------+------------------------------------------- -10204 (0x27db) | 5824 (0x16c0) | For USB Joysticks ----------------+---------------+------------------------------------------- -10205 (0x27dc) | 5824 (0x16c0) | For CDC-ACM class devices (modems) ----------------+---------------+------------------------------------------- -10206 (0x27dd) | 5824 (0x16c0) | For MIDI class devices ----------------+---------------+------------------------------------------- - - -================= -ORIGIN OF USB-IDs -================= - -OBJECTIVE DEVELOPMENT Software GmbH has obtained all VID/PID pairs listed -here from Wouter van Ooijen (see www.voti.nl) for exclusive disposition. -Wouter van Ooijen has obtained the VID from the USB Implementers Forum, Inc. -(see www.usb.org). The VID is registered for the company name "Van Ooijen -Technische Informatica". - - -========== -DISCLAIMER -========== - -OBJECTIVE DEVELOPMENT Software GmbH disclaims all liability for any -problems which are caused by the shared use of these VID/PID pairs. diff --git a/tmk_core/protocol/vusb/usbdrv/asmcommon.inc b/tmk_core/protocol/vusb/usbdrv/asmcommon.inc deleted file mode 100644 index 07d692be3b..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/asmcommon.inc +++ /dev/null @@ -1,188 +0,0 @@ -/* Name: asmcommon.inc - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2007-11-05 - * Tabsize: 4 - * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * Revision: $Id$ - */ - -/* Do not link this file! Link usbdrvasm.S instead, which includes the - * appropriate implementation! - */ - -/* -General Description: -This file contains assembler code which is shared among the USB driver -implementations for different CPU cocks. Since the code must be inserted -in the middle of the module, it's split out into this file and #included. - -Jump destinations called from outside: - sofError: Called when no start sequence was found. - se0: Called when a package has been successfully received. - overflow: Called when receive buffer overflows. - doReturn: Called after sending data. - -Outside jump destinations used by this module: - waitForJ: Called to receive an already arriving packet. - sendAckAndReti: - sendNakAndReti: - sendCntAndReti: - usbSendAndReti: - -The following macros must be defined before this file is included: - .macro POP_STANDARD - .endm - .macro POP_RETI - .endm -*/ - -#define token x1 - -overflow: - ldi x2, 1<<USB_INTR_PENDING_BIT - USB_STORE_PENDING(x2) ; clear any pending interrupts -ignorePacket: - clr token - rjmp storeTokenAndReturn - -;---------------------------------------------------------------------------- -; Processing of received packet (numbers in brackets are cycles after center of SE0) -;---------------------------------------------------------------------------- -;This is the only non-error exit point for the software receiver loop -;we don't check any CRCs here because there is no time left. -se0: - subi cnt, USB_BUFSIZE ;[5] - neg cnt ;[6] - sub YL, cnt ;[7] - sbci YH, 0 ;[8] - ldi x2, 1<<USB_INTR_PENDING_BIT ;[9] - USB_STORE_PENDING(x2) ;[10] clear pending intr and check flag later. SE0 should be over. - ld token, y ;[11] - cpi token, USBPID_DATA0 ;[13] - breq handleData ;[14] - cpi token, USBPID_DATA1 ;[15] - breq handleData ;[16] - lds shift, usbDeviceAddr;[17] - ldd x2, y+1 ;[19] ADDR and 1 bit endpoint number - lsl x2 ;[21] shift out 1 bit endpoint number - cpse x2, shift ;[22] - rjmp ignorePacket ;[23] -/* only compute endpoint number in x3 if required later */ -#if USB_CFG_HAVE_INTRIN_ENDPOINT || USB_CFG_IMPLEMENT_FN_WRITEOUT - ldd x3, y+2 ;[24] endpoint number + crc - rol x3 ;[26] shift in LSB of endpoint -#endif - cpi token, USBPID_IN ;[27] - breq handleIn ;[28] - cpi token, USBPID_SETUP ;[29] - breq handleSetupOrOut ;[30] - cpi token, USBPID_OUT ;[31] - brne ignorePacket ;[32] must be ack, nak or whatever -; rjmp handleSetupOrOut ; fallthrough - -;Setup and Out are followed by a data packet two bit times (16 cycles) after -;the end of SE0. The sync code allows up to 40 cycles delay from the start of -;the sync pattern until the first bit is sampled. That's a total of 56 cycles. -handleSetupOrOut: ;[32] -#if USB_CFG_IMPLEMENT_FN_WRITEOUT /* if we have data for endpoint != 0, set usbCurrentTok to address */ - andi x3, 0xf ;[32] - breq storeTokenAndReturn ;[33] - mov token, x3 ;[34] indicate that this is endpoint x OUT -#endif -storeTokenAndReturn: - sts usbCurrentTok, token;[35] -doReturn: - POP_STANDARD ;[37] 12...16 cycles - USB_LOAD_PENDING(YL) ;[49] - sbrc YL, USB_INTR_PENDING_BIT;[50] check whether data is already arriving - rjmp waitForJ ;[51] save the pops and pushes -- a new interrupt is already pending -sofError: - POP_RETI ;macro call - reti - -handleData: -#if USB_CFG_CHECK_CRC - CRC_CLEANUP_AND_CHECK ; jumps to ignorePacket if CRC error -#endif - lds shift, usbCurrentTok;[18] - tst shift ;[20] - breq doReturn ;[21] - lds x2, usbRxLen ;[22] - tst x2 ;[24] - brne sendNakAndReti ;[25] -; 2006-03-11: The following two lines fix a problem where the device was not -; recognized if usbPoll() was called less frequently than once every 4 ms. - cpi cnt, 4 ;[26] zero sized data packets are status phase only -- ignore and ack - brmi sendAckAndReti ;[27] keep rx buffer clean -- we must not NAK next SETUP -#if USB_CFG_CHECK_DATA_TOGGLING - sts usbCurrentDataToken, token ; store for checking by C code -#endif - sts usbRxLen, cnt ;[28] store received data, swap buffers - sts usbRxToken, shift ;[30] - lds x2, usbInputBufOffset;[32] swap buffers - ldi cnt, USB_BUFSIZE ;[34] - sub cnt, x2 ;[35] - sts usbInputBufOffset, cnt;[36] buffers now swapped - rjmp sendAckAndReti ;[38] 40 + 17 = 57 until SOP - -handleIn: -;We don't send any data as long as the C code has not processed the current -;input data and potentially updated the output data. That's more efficient -;in terms of code size than clearing the tx buffers when a packet is received. - lds x1, usbRxLen ;[30] - cpi x1, 1 ;[32] negative values are flow control, 0 means "buffer free" - brge sendNakAndReti ;[33] unprocessed input packet? - ldi x1, USBPID_NAK ;[34] prepare value for usbTxLen -#if USB_CFG_HAVE_INTRIN_ENDPOINT - andi x3, 0xf ;[35] x3 contains endpoint -#if USB_CFG_SUPPRESS_INTR_CODE - brne sendNakAndReti ;[36] -#else - brne handleIn1 ;[36] -#endif -#endif - lds cnt, usbTxLen ;[37] - sbrc cnt, 4 ;[39] all handshake tokens have bit 4 set - rjmp sendCntAndReti ;[40] 42 + 16 = 58 until SOP - sts usbTxLen, x1 ;[41] x1 == USBPID_NAK from above - ldi YL, lo8(usbTxBuf) ;[43] - ldi YH, hi8(usbTxBuf) ;[44] - rjmp usbSendAndReti ;[45] 57 + 12 = 59 until SOP - -; Comment about when to set usbTxLen to USBPID_NAK: -; We should set it back when we receive the ACK from the host. This would -; be simple to implement: One static variable which stores whether the last -; tx was for endpoint 0 or 1 and a compare in the receiver to distinguish the -; ACK. However, we set it back immediately when we send the package, -; assuming that no error occurs and the host sends an ACK. We save one byte -; RAM this way and avoid potential problems with endless retries. The rest of -; the driver assumes error-free transfers anyway. - -#if !USB_CFG_SUPPRESS_INTR_CODE && USB_CFG_HAVE_INTRIN_ENDPOINT /* placed here due to relative jump range */ -handleIn1: ;[38] -#if USB_CFG_HAVE_INTRIN_ENDPOINT3 -; 2006-06-10 as suggested by O.Tamura: support second INTR IN / BULK IN endpoint - cpi x3, USB_CFG_EP3_NUMBER;[38] - breq handleIn3 ;[39] -#endif - lds cnt, usbTxLen1 ;[40] - sbrc cnt, 4 ;[42] all handshake tokens have bit 4 set - rjmp sendCntAndReti ;[43] 47 + 16 = 63 until SOP - sts usbTxLen1, x1 ;[44] x1 == USBPID_NAK from above - ldi YL, lo8(usbTxBuf1) ;[46] - ldi YH, hi8(usbTxBuf1) ;[47] - rjmp usbSendAndReti ;[48] 50 + 12 = 62 until SOP - -#if USB_CFG_HAVE_INTRIN_ENDPOINT3 -handleIn3: - lds cnt, usbTxLen3 ;[41] - sbrc cnt, 4 ;[43] - rjmp sendCntAndReti ;[44] 49 + 16 = 65 until SOP - sts usbTxLen3, x1 ;[45] x1 == USBPID_NAK from above - ldi YL, lo8(usbTxBuf3) ;[47] - ldi YH, hi8(usbTxBuf3) ;[48] - rjmp usbSendAndReti ;[49] 51 + 12 = 63 until SOP -#endif -#endif diff --git a/tmk_core/protocol/vusb/usbdrv/oddebug.c b/tmk_core/protocol/vusb/usbdrv/oddebug.c deleted file mode 100644 index bcd28ff014..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/oddebug.c +++ /dev/null @@ -1,46 +0,0 @@ -/* Name: oddebug.c - * Project: AVR library - * Author: Christian Starkjohann - * Creation Date: 2005-01-16 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: oddebug.c 692 2008-11-07 15:07:40Z cs $ - */ - -#include "oddebug.h" - -#if DEBUG_LEVEL > 0 - -# warning "Never compile production devices with debugging enabled" - -static void uartPutc(char c) { - while (!(ODDBG_USR & (1 << ODDBG_UDRE))) - ; /* wait for data register empty */ - ODDBG_UDR = c; -} - -static uchar hexAscii(uchar h) { - h &= 0xf; - if (h >= 10) h += 'a' - (uchar)10 - '0'; - h += '0'; - return h; -} - -static void printHex(uchar c) { - uartPutc(hexAscii(c >> 4)); - uartPutc(hexAscii(c)); -} - -void odDebug(uchar prefix, uchar *data, uchar len) { - printHex(prefix); - uartPutc(':'); - while (len--) { - uartPutc(' '); - printHex(*data++); - } - uartPutc('\r'); - uartPutc('\n'); -} - -#endif diff --git a/tmk_core/protocol/vusb/usbdrv/oddebug.h b/tmk_core/protocol/vusb/usbdrv/oddebug.h deleted file mode 100644 index f93f338794..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/oddebug.h +++ /dev/null @@ -1,121 +0,0 @@ -/* Name: oddebug.h - * Project: AVR library - * Author: Christian Starkjohann - * Creation Date: 2005-01-16 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: oddebug.h 692 2008-11-07 15:07:40Z cs $ - */ - -#ifndef __oddebug_h_included__ -#define __oddebug_h_included__ - -/* -General Description: -This module implements a function for debug logs on the serial line of the -AVR microcontroller. Debugging can be configured with the define -'DEBUG_LEVEL'. If this macro is not defined or defined to 0, all debugging -calls are no-ops. If it is 1, DBG1 logs will appear, but not DBG2. If it is -2, DBG1 and DBG2 logs will be printed. - -A debug log consists of a label ('prefix') to indicate which debug log created -the output and a memory block to dump in hex ('data' and 'len'). -*/ - -#ifndef F_CPU -# define F_CPU 12000000 /* 12 MHz */ -#endif - -/* make sure we have the UART defines: */ -#include "usbportability.h" - -#ifndef uchar -# define uchar unsigned char -#endif - -#if DEBUG_LEVEL > 0 && !(defined TXEN || defined TXEN0) /* no UART in device */ -# warning "Debugging disabled because device has no UART" -# undef DEBUG_LEVEL -#endif - -#ifndef DEBUG_LEVEL -# define DEBUG_LEVEL 0 -#endif - -/* ------------------------------------------------------------------------- */ - -#if DEBUG_LEVEL > 0 -# define DBG1(prefix, data, len) odDebug(prefix, data, len) -#else -# define DBG1(prefix, data, len) -#endif - -#if DEBUG_LEVEL > 1 -# define DBG2(prefix, data, len) odDebug(prefix, data, len) -#else -# define DBG2(prefix, data, len) -#endif - -/* ------------------------------------------------------------------------- */ - -#if DEBUG_LEVEL > 0 -extern void odDebug(uchar prefix, uchar *data, uchar len); - -/* Try to find our control registers; ATMEL likes to rename these */ - -# if defined UBRR -# define ODDBG_UBRR UBRR -# elif defined UBRRL -# define ODDBG_UBRR UBRRL -# elif defined UBRR0 -# define ODDBG_UBRR UBRR0 -# elif defined UBRR0L -# define ODDBG_UBRR UBRR0L -# endif - -# if defined UCR -# define ODDBG_UCR UCR -# elif defined UCSRB -# define ODDBG_UCR UCSRB -# elif defined UCSR0B -# define ODDBG_UCR UCSR0B -# endif - -# if defined TXEN -# define ODDBG_TXEN TXEN -# else -# define ODDBG_TXEN TXEN0 -# endif - -# if defined USR -# define ODDBG_USR USR -# elif defined UCSRA -# define ODDBG_USR UCSRA -# elif defined UCSR0A -# define ODDBG_USR UCSR0A -# endif - -# if defined UDRE -# define ODDBG_UDRE UDRE -# else -# define ODDBG_UDRE UDRE0 -# endif - -# if defined UDR -# define ODDBG_UDR UDR -# elif defined UDR0 -# define ODDBG_UDR UDR0 -# endif - -static inline void odDebugInit(void) { - ODDBG_UCR |= (1 << ODDBG_TXEN); - ODDBG_UBRR = F_CPU / (19200 * 16L) - 1; -} -#else -# define odDebugInit() -#endif - -/* ------------------------------------------------------------------------- */ - -#endif /* __oddebug_h_included__ */ diff --git a/tmk_core/protocol/vusb/usbdrv/usbconfig-prototype.h b/tmk_core/protocol/vusb/usbdrv/usbconfig-prototype.h deleted file mode 100644 index 020ea51474..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/usbconfig-prototype.h +++ /dev/null @@ -1,376 +0,0 @@ -/* Name: usbconfig.h - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2005-04-01 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ - */ - -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ - -/* -General Description: -This file is an example configuration (with inline documentation) for the USB -driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is -also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may -wire the lines to any other port, as long as D+ is also wired to INT0 (or any -other hardware interrupt, as long as it is the highest level interrupt, see -section at the end of this file). -+ To create your own usbconfig.h file, copy this file to your project's -+ firmware source directory) and rename it to "usbconfig.h". -+ Then edit it accordingly. -*/ - -/* ---------------------------- Hardware Config ---------------------------- */ - -#define USB_CFG_IOPORTNAME D -/* This is the port where the USB bus is connected. When you configure it to - * "B", the registers PORTB, PINB and DDRB will be used. - */ -#define USB_CFG_DMINUS_BIT 4 -/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. - * This may be any bit in the port. - */ -#define USB_CFG_DPLUS_BIT 2 -/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. - * This may be any bit in the port. Please note that D+ must also be connected - * to interrupt pin INT0! [You can also use other interrupts, see section - * "Optional MCU Description" below, or you can connect D- to the interrupt, as - * it is required if you use the USB_COUNT_SOF feature. If you use D- for the - * interrupt, the USB interrupt will also be triggered at Start-Of-Frame - * markers every millisecond.] - */ -#define USB_CFG_CLOCK_KHZ (F_CPU / 1000) -/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, - * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code - * require no crystal, they tolerate +/- 1% deviation from the nominal - * frequency. All other rates require a precision of 2000 ppm and thus a - * crystal! - * Since F_CPU should be defined to your actual clock rate anyway, you should - * not need to modify this setting. - */ -#define USB_CFG_CHECK_CRC 0 -/* Define this to 1 if you want that the driver checks integrity of incoming - * data packets (CRC checks). CRC checks cost quite a bit of code size and are - * currently only available for 18 MHz crystal clock. You must choose - * USB_CFG_CLOCK_KHZ = 18000 if you enable this option. - */ - -/* ----------------------- Optional Hardware Config ------------------------ */ - -/* #define USB_CFG_PULLUP_IOPORTNAME D */ -/* If you connect the 1.5k pullup resistor from D- to a port pin instead of - * V+, you can connect and disconnect the device from firmware by calling - * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). - * This constant defines the port on which the pullup resistor is connected. - */ -/* #define USB_CFG_PULLUP_BIT 4 */ -/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined - * above) where the 1.5k pullup resistor is connected. See description - * above for details. - */ - -/* --------------------------- Functional Range ---------------------------- */ - -#define USB_CFG_HAVE_INTRIN_ENDPOINT 0 -/* Define this to 1 if you want to compile a version with two endpoints: The - * default control endpoint 0 and an interrupt-in endpoint (any other endpoint - * number). - */ -#define USB_CFG_HAVE_INTRIN_ENDPOINT3 0 -/* Define this to 1 if you want to compile a version with three endpoints: The - * default control endpoint 0, an interrupt-in endpoint 3 (or the number - * configured below) and a catch-all default interrupt-in endpoint as above. - * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. - */ -#define USB_CFG_EP3_NUMBER 3 -/* If the so-called endpoint 3 is used, it can now be configured to any other - * endpoint number (except 0) with this macro. Default if undefined is 3. - */ -/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ -/* The above macro defines the startup condition for data toggling on the - * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. - * Since the token is toggled BEFORE sending any data, the first packet is - * sent with the oposite value of this configuration! - */ -#define USB_CFG_IMPLEMENT_HALT 0 -/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature - * for endpoint 1 (interrupt endpoint). Although you may not need this feature, - * it is required by the standard. We have made it a config option because it - * bloats the code considerably. - */ -#define USB_CFG_SUPPRESS_INTR_CODE 0 -/* Define this to 1 if you want to declare interrupt-in endpoints, but don't - * want to send any data over them. If this macro is defined to 1, functions - * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if - * you need the interrupt-in endpoints in order to comply to an interface - * (e.g. HID), but never want to send any data. This option saves a couple - * of bytes in flash memory and the transmit buffers in RAM. - */ -#define USB_CFG_INTR_POLL_INTERVAL 10 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ -#define USB_CFG_IS_SELF_POWERED 0 -/* Define this to 1 if the device has its own power supply. Set it to 0 if the - * device is powered from the USB bus. - */ -#define USB_CFG_MAX_BUS_POWER 100 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ -#define USB_CFG_IMPLEMENT_FN_WRITE 0 -/* Set this to 1 if you want usbFunctionWrite() to be called for control-out - * transfers. Set it to 0 if you don't need it and want to save a couple of - * bytes. - */ -#define USB_CFG_IMPLEMENT_FN_READ 0 -/* Set this to 1 if you need to send control replies which are generated - * "on the fly" when usbFunctionRead() is called. If you only want to send - * data from a static buffer, set it to 0 and return the data from - * usbFunctionSetup(). This saves a couple of bytes. - */ -#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 -/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. - * You must implement the function usbFunctionWriteOut() which receives all - * interrupt/bulk data sent to any endpoint other than 0. The endpoint number - * can be found in 'usbRxToken'. - */ -#define USB_CFG_HAVE_FLOWCONTROL 0 -/* Define this to 1 if you want flowcontrol over USB data. See the definition - * of the macros usbDisableAllRequests() and usbEnableAllRequests() in - * usbdrv.h. - */ -#define USB_CFG_DRIVER_FLASH_PAGE 0 -/* If the device has more than 64 kBytes of flash, define this to the 64 k page - * where the driver's constants (descriptors) are located. Or in other words: - * Define this to 1 for boot loaders on the ATMega128. - */ -#define USB_CFG_LONG_TRANSFERS 0 -/* Define this to 1 if you want to send/receive blocks of more than 254 bytes - * in a single control-in or control-out transfer. Note that the capability - * for long transfers increases the driver size. - */ -/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ -/* This macro is a hook if you want to do unconventional things. If it is - * defined, it's inserted at the beginning of received message processing. - * If you eat the received message and don't want default processing to - * proceed, do a return after doing your things. One possible application - * (besides debugging) is to flash a status LED on each packet. - */ -/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ -/* This macro is a hook if you need to know when an USB RESET occurs. It has - * one parameter which distinguishes between the start of RESET state and its - * end. - */ -/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ -/* This macro (if defined) is executed when a USB SET_ADDRESS request was - * received. - */ -#define USB_COUNT_SOF 0 -/* define this macro to 1 if you need the global variable "usbSofCount" which - * counts SOF packets. This feature requires that the hardware interrupt is - * connected to D- instead of D+. - */ -/* #ifdef __ASSEMBLER__ - * macro myAssemblerMacro - * in YL, TCNT0 - * sts timer0Snapshot, YL - * endm - * #endif - * #define USB_SOF_HOOK myAssemblerMacro - * This macro (if defined) is executed in the assembler module when a - * Start Of Frame condition is detected. It is recommended to define it to - * the name of an assembler macro which is defined here as well so that more - * than one assembler instruction can be used. The macro may use the register - * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages - * immediately after an SOF pulse may be lost and must be retried by the host. - * What can you do with this hook? Since the SOF signal occurs exactly every - * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in - * designs running on the internal RC oscillator. - * Please note that Start Of Frame detection works only if D- is wired to the - * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! - */ -#define USB_CFG_CHECK_DATA_TOGGLING 0 -/* define this macro to 1 if you want to filter out duplicate data packets - * sent by the host. Duplicates occur only as a consequence of communication - * errors, when the host does not receive an ACK. Please note that you need to - * implement the filtering yourself in usbFunctionWriteOut() and - * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable - * for each control- and out-endpoint to check for duplicate packets. - */ -#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 -/* define this macro to 1 if you want the function usbMeasureFrameLength() - * compiled in. This function can be used to calibrate the AVR's RC oscillator. - */ -#define USB_USE_FAST_CRC 0 -/* The assembler module has two implementations for the CRC algorithm. One is - * faster, the other is smaller. This CRC routine is only used for transmitted - * messages where timing is not critical. The faster routine needs 31 cycles - * per byte while the smaller one needs 61 to 69 cycles. The faster routine - * may be worth the 32 bytes bigger code size if you transmit lots of data and - * run the AVR close to its limit. - */ - -/* -------------------------- Device Description --------------------------- */ - -#define USB_CFG_VENDOR_ID 0xc0, 0x16 /* = 0x16c0 = 5824 = voti.nl */ -/* USB vendor ID for the device, low byte first. If you have registered your - * own Vendor ID, define it here. Otherwise you may use one of obdev's free - * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_ID 0xdc, 0x05 /* = 0x05dc = 1500 */ -/* This is the ID of the product, low byte first. It is interpreted in the - * scope of the vendor ID. If you have registered your own VID with usb.org - * or if you have licensed a PID from somebody else, define it here. Otherwise - * you may use one of obdev's free shared VID/PID pairs. See the file - * USB-IDs-for-free.txt for details! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x01 -/* Version number of the device: Minor number first, then major number. - */ -#define USB_CFG_VENDOR_NAME 'o', 'b', 'd', 'e', 'v', '.', 'a', 't' -#define USB_CFG_VENDOR_NAME_LEN 8 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'T', 'e', 'm', 'p', 'l', 'a', 't', 'e' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ -#define USB_CFG_DEVICE_CLASS 0xff /* set to 0 if deferred to interface */ -#define USB_CFG_DEVICE_SUBCLASS 0 -/* See USB specification if you want to conform to an existing device class. - * Class 0xff is "vendor specific". - */ -#define USB_CFG_INTERFACE_CLASS 0 /* define class here if not at device level */ -#define USB_CFG_INTERFACE_SUBCLASS 0 -#define USB_CFG_INTERFACE_PROTOCOL 0 -/* See USB specification if you want to conform to an existing device class or - * protocol. The following classes must be set at interface level: - * HID class is 3, no subclass and protocol required (but may be useful!) - * CDC class is 2, use subclass 2 and protocol 1 for ACM - */ -/* #define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 42 */ -/* Define this to the length of the HID report descriptor, if you implement - * an HID device. Otherwise don't define it or define it to 0. - * If you use this define, you must add a PROGMEM character array named - * "usbHidReportDescriptor" to your code which contains the report descriptor. - * Don't forget to keep the array and this define in sync! - */ - -/* #define USB_PUBLIC static */ -/* Use the define above if you #include usbdrv.c instead of linking against it. - * This technique saves a couple of bytes in flash memory. - */ - -/* ------------------- Fine Control over USB Descriptors ------------------- */ -/* If you don't want to use the driver's default USB descriptors, you can - * provide our own. These can be provided as (1) fixed length static data in - * flash memory, (2) fixed length static data in RAM or (3) dynamically at - * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more - * information about this function. - * Descriptor handling is configured through the descriptor's properties. If - * no properties are defined or if they are 0, the default descriptor is used. - * Possible properties are: - * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched - * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is - * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if - * you want RAM pointers. - * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found - * in static memory is in RAM, not in flash memory. - * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), - * the driver must know the descriptor's length. The descriptor itself is - * found at the address of a well known identifier (see below). - * List of static descriptor names (must be declared PROGMEM if in flash): - * char usbDescriptorDevice[]; - * char usbDescriptorConfiguration[]; - * char usbDescriptorHidReport[]; - * char usbDescriptorString0[]; - * int usbDescriptorStringVendor[]; - * int usbDescriptorStringDevice[]; - * int usbDescriptorStringSerialNumber[]; - * Other descriptors can't be provided statically, they must be provided - * dynamically at runtime. - * - * Descriptor properties are or-ed or added together, e.g.: - * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) - * - * The following descriptors are defined: - * USB_CFG_DESCR_PROPS_DEVICE - * USB_CFG_DESCR_PROPS_CONFIGURATION - * USB_CFG_DESCR_PROPS_STRINGS - * USB_CFG_DESCR_PROPS_STRING_0 - * USB_CFG_DESCR_PROPS_STRING_VENDOR - * USB_CFG_DESCR_PROPS_STRING_PRODUCT - * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER - * USB_CFG_DESCR_PROPS_HID - * USB_CFG_DESCR_PROPS_HID_REPORT - * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) - * - * Note about string descriptors: String descriptors are not just strings, they - * are Unicode strings prefixed with a 2 byte header. Example: - * int serialNumberDescriptor[] = { - * USB_STRING_DESCRIPTOR_HEADER(6), - * 'S', 'e', 'r', 'i', 'a', 'l' - * }; - */ - -#define USB_CFG_DESCR_PROPS_DEVICE 0 -#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 -#define USB_CFG_DESCR_PROPS_HID 0 -#define USB_CFG_DESCR_PROPS_HID_REPORT 0 -#define USB_CFG_DESCR_PROPS_UNKNOWN 0 - -/* ----------------------- Optional MCU Description ------------------------ */ - -/* The following configurations have working defaults in usbdrv.h. You - * usually don't need to set them explicitly. Only if you want to run - * the driver on a device which is not yet supported or with a compiler - * which is not fully supported (such as IAR C) or if you use a differnt - * interrupt than INT0, you may have to define some of these. - */ -/* #define USB_INTR_CFG MCUCR */ -/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE GIMSK */ -/* #define USB_INTR_ENABLE_BIT INT0 */ -/* #define USB_INTR_PENDING GIFR */ -/* #define USB_INTR_PENDING_BIT INTF0 */ -/* #define USB_INTR_VECTOR INT0_vect */ - -#endif /* __usbconfig_h_included__ */ diff --git a/tmk_core/protocol/vusb/usbdrv/usbdrv.c b/tmk_core/protocol/vusb/usbdrv/usbdrv.c deleted file mode 100644 index f69198b1b9..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/usbdrv.c +++ /dev/null @@ -1,622 +0,0 @@ -/* Name: usbdrv.c - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2004-12-29 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: usbdrv.c 791 2010-07-15 15:56:13Z cs $ - */ - -#include "usbportability.h" -#include "usbdrv.h" -#include "oddebug.h" - -/* -General Description: -This module implements the C-part of the USB driver. See usbdrv.h for a -documentation of the entire driver. -*/ - -/* ------------------------------------------------------------------------- */ - -/* raw USB registers / interface to assembler code: */ -uchar usbRxBuf[2 * USB_BUFSIZE]; /* raw RX buffer: PID, 8 bytes data, 2 bytes CRC */ -uchar usbInputBufOffset; /* offset in usbRxBuf used for low level receiving */ -uchar usbDeviceAddr; /* assigned during enumeration, defaults to 0 */ -uchar usbNewDeviceAddr; /* device ID which should be set after status phase */ -uchar usbConfiguration; /* currently selected configuration. Administered by driver, but not used */ -volatile schar usbRxLen; /* = 0; number of bytes in usbRxBuf; 0 means free, -1 for flow control */ -uchar usbCurrentTok; /* last token received or endpoint number for last OUT token if != 0 */ -uchar usbRxToken; /* token for data we received; or endpont number for last OUT */ -volatile uchar usbTxLen = USBPID_NAK; /* number of bytes to transmit with next IN token or handshake token */ -uchar usbTxBuf[USB_BUFSIZE]; /* data to transmit with next IN, free if usbTxLen contains handshake token */ -#if USB_COUNT_SOF -volatile uchar usbSofCount; /* incremented by assembler module every SOF */ -#endif -#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE -usbTxStatus_t usbTxStatus1; -# if USB_CFG_HAVE_INTRIN_ENDPOINT3 -usbTxStatus_t usbTxStatus3; -# endif -#endif -#if USB_CFG_CHECK_DATA_TOGGLING -uchar usbCurrentDataToken; /* when we check data toggling to ignore duplicate packets */ -#endif - -/* USB status registers / not shared with asm code */ -uchar * usbMsgPtr; /* data to transmit next -- ROM or RAM address */ -static usbMsgLen_t usbMsgLen = USB_NO_MSG; /* remaining number of bytes */ -static uchar usbMsgFlags; /* flag values see below */ - -#define USB_FLG_MSGPTR_IS_ROM (1 << 6) -#define USB_FLG_USE_USER_RW (1 << 7) - -/* -optimizing hints: -- do not post/pre inc/dec integer values in operations -- assign value of USB_READ_FLASH() to register variables and don't use side effects in arg -- use narrow scope for variables which should be in X/Y/Z register -- assign char sized expressions to variables to force 8 bit arithmetics -*/ - -/* -------------------------- String Descriptors --------------------------- */ - -#if USB_CFG_DESCR_PROPS_STRINGS == 0 - -# if USB_CFG_DESCR_PROPS_STRING_0 == 0 -# undef USB_CFG_DESCR_PROPS_STRING_0 -# define USB_CFG_DESCR_PROPS_STRING_0 sizeof(usbDescriptorString0) -const PROGMEM char usbDescriptorString0[] = { - /* language descriptor */ - 4, /* sizeof(usbDescriptorString0): length of descriptor in bytes */ - 3, /* descriptor type */ - 0x09, 0x04, /* language index (0x0409 = US-English) */ -}; -# endif - -# if USB_CFG_DESCR_PROPS_STRING_VENDOR == 0 && USB_CFG_VENDOR_NAME_LEN -# undef USB_CFG_DESCR_PROPS_STRING_VENDOR -# define USB_CFG_DESCR_PROPS_STRING_VENDOR sizeof(usbDescriptorStringVendor) -const PROGMEM int usbDescriptorStringVendor[] = {USB_STRING_DESCRIPTOR_HEADER(USB_CFG_VENDOR_NAME_LEN), USB_CFG_VENDOR_NAME}; -# endif - -# if USB_CFG_DESCR_PROPS_STRING_PRODUCT == 0 && USB_CFG_DEVICE_NAME_LEN -# undef USB_CFG_DESCR_PROPS_STRING_PRODUCT -# define USB_CFG_DESCR_PROPS_STRING_PRODUCT sizeof(usbDescriptorStringDevice) -const PROGMEM int usbDescriptorStringDevice[] = {USB_STRING_DESCRIPTOR_HEADER(USB_CFG_DEVICE_NAME_LEN), USB_CFG_DEVICE_NAME}; -# endif - -# if USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER == 0 && USB_CFG_SERIAL_NUMBER_LEN -# undef USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER -# define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER sizeof(usbDescriptorStringSerialNumber) -const PROGMEM int usbDescriptorStringSerialNumber[] = {USB_STRING_DESCRIPTOR_HEADER(USB_CFG_SERIAL_NUMBER_LEN), USB_CFG_SERIAL_NUMBER}; -# endif - -#endif /* USB_CFG_DESCR_PROPS_STRINGS == 0 */ - -/* --------------------------- Device Descriptor --------------------------- */ - -#if USB_CFG_DESCR_PROPS_DEVICE == 0 -# undef USB_CFG_DESCR_PROPS_DEVICE -# define USB_CFG_DESCR_PROPS_DEVICE sizeof(usbDescriptorDevice) -const PROGMEM char usbDescriptorDevice[] = { - /* USB device descriptor */ - 18, /* sizeof(usbDescriptorDevice): length of descriptor in bytes */ - USBDESCR_DEVICE, /* descriptor type */ - 0x10, 0x01, /* USB version supported */ - USB_CFG_DEVICE_CLASS, USB_CFG_DEVICE_SUBCLASS, 0, /* protocol */ - 8, /* max packet size */ - /* the following two casts affect the first byte of the constant only, but - * that's sufficient to avoid a warning with the default values. - */ - (char)USB_CFG_VENDOR_ID, /* 2 bytes */ - (char)USB_CFG_DEVICE_ID, /* 2 bytes */ - USB_CFG_DEVICE_VERSION, /* 2 bytes */ - USB_CFG_DESCR_PROPS_STRING_VENDOR != 0 ? 1 : 0, /* manufacturer string index */ - USB_CFG_DESCR_PROPS_STRING_PRODUCT != 0 ? 2 : 0, /* product string index */ - USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER != 0 ? 3 : 0, /* serial number string index */ - 1, /* number of configurations */ -}; -#endif - -/* ----------------------- Configuration Descriptor ------------------------ */ - -#if USB_CFG_DESCR_PROPS_HID_REPORT != 0 && USB_CFG_DESCR_PROPS_HID == 0 -# undef USB_CFG_DESCR_PROPS_HID -# define USB_CFG_DESCR_PROPS_HID 9 /* length of HID descriptor in config descriptor below */ -#endif - -#if USB_CFG_DESCR_PROPS_CONFIGURATION == 0 -# undef USB_CFG_DESCR_PROPS_CONFIGURATION -# define USB_CFG_DESCR_PROPS_CONFIGURATION sizeof(usbDescriptorConfiguration) -PROGMEM char usbDescriptorConfiguration[] = { - /* USB configuration descriptor */ - 9, /* sizeof(usbDescriptorConfiguration): length of descriptor in bytes */ - USBDESCR_CONFIG, /* descriptor type */ - 18 + 7 * USB_CFG_HAVE_INTRIN_ENDPOINT + 7 * USB_CFG_HAVE_INTRIN_ENDPOINT3 + (USB_CFG_DESCR_PROPS_HID & 0xff), 0, - /* total length of data returned (including inlined descriptors) */ - 1, /* number of interfaces in this configuration */ - 1, /* index of this configuration */ - 0, /* configuration name string index */ -# if USB_CFG_IS_SELF_POWERED - (1 << 7) | USBATTR_SELFPOWER, /* attributes */ -# else - (1 << 7), /* attributes */ -# endif - USB_CFG_MAX_BUS_POWER / 2, /* max USB current in 2mA units */ - /* interface descriptor follows inline: */ - 9, /* sizeof(usbDescrInterface): length of descriptor in bytes */ - USBDESCR_INTERFACE, /* descriptor type */ - 0, /* index of this interface */ - 0, /* alternate setting for this interface */ - USB_CFG_HAVE_INTRIN_ENDPOINT + USB_CFG_HAVE_INTRIN_ENDPOINT3, /* endpoints excl 0: number of endpoint descriptors to follow */ - USB_CFG_INTERFACE_CLASS, USB_CFG_INTERFACE_SUBCLASS, USB_CFG_INTERFACE_PROTOCOL, 0, /* string index for interface */ -# if (USB_CFG_DESCR_PROPS_HID & 0xff) /* HID descriptor */ - 9, /* sizeof(usbDescrHID): length of descriptor in bytes */ - USBDESCR_HID, /* descriptor type: HID */ - 0x01, 0x01, /* BCD representation of HID version */ - 0x00, /* target country code */ - 0x01, /* number of HID Report (or other HID class) Descriptor infos to follow */ - 0x22, /* descriptor type: report */ - USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH, 0, /* total length of report descriptor */ -# endif -# if USB_CFG_HAVE_INTRIN_ENDPOINT /* endpoint descriptor for endpoint 1 */ - 7, /* sizeof(usbDescrEndpoint) */ - USBDESCR_ENDPOINT, /* descriptor type = endpoint */ - (char)0x81, /* IN endpoint number 1 */ - 0x03, /* attrib: Interrupt endpoint */ - 8, 0, /* maximum packet size */ - USB_CFG_INTR_POLL_INTERVAL, /* in ms */ -# endif -# if USB_CFG_HAVE_INTRIN_ENDPOINT3 /* endpoint descriptor for endpoint 3 */ - 7, /* sizeof(usbDescrEndpoint) */ - USBDESCR_ENDPOINT, /* descriptor type = endpoint */ - (char)(0x80 | USB_CFG_EP3_NUMBER), /* IN endpoint number 3 */ - 0x03, /* attrib: Interrupt endpoint */ - 8, 0, /* maximum packet size */ - USB_CFG_INTR_POLL_INTERVAL, /* in ms */ -# endif -}; -#endif - -/* ------------------------------------------------------------------------- */ - -static inline void usbResetDataToggling(void) { -#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE - USB_SET_DATATOKEN1(USB_INITIAL_DATATOKEN); /* reset data toggling for interrupt endpoint */ -# if USB_CFG_HAVE_INTRIN_ENDPOINT3 - USB_SET_DATATOKEN3(USB_INITIAL_DATATOKEN); /* reset data toggling for interrupt endpoint */ -# endif -#endif -} - -static inline void usbResetStall(void) { -#if USB_CFG_IMPLEMENT_HALT && USB_CFG_HAVE_INTRIN_ENDPOINT - usbTxLen1 = USBPID_NAK; -# if USB_CFG_HAVE_INTRIN_ENDPOINT3 - usbTxLen3 = USBPID_NAK; -# endif -#endif -} - -/* ------------------------------------------------------------------------- */ - -#if !USB_CFG_SUPPRESS_INTR_CODE -# if USB_CFG_HAVE_INTRIN_ENDPOINT -static void usbGenericSetInterrupt(uchar *data, uchar len, usbTxStatus_t *txStatus) { - uchar *p; - char i; - -# if USB_CFG_IMPLEMENT_HALT - if (usbTxLen1 == USBPID_STALL) return; -# endif - if (txStatus->len & 0x10) { /* packet buffer was empty */ - txStatus->buffer[0] ^= USBPID_DATA0 ^ USBPID_DATA1; /* toggle token */ - } else { - txStatus->len = USBPID_NAK; /* avoid sending outdated (overwritten) interrupt data */ - } - p = txStatus->buffer + 1; - i = len; - do { /* if len == 0, we still copy 1 byte, but that's no problem */ - *p++ = *data++; - } while (--i > 0); /* loop control at the end is 2 bytes shorter than at beginning */ - usbCrc16Append(&txStatus->buffer[1], len); - txStatus->len = len + 4; /* len must be given including sync byte */ - DBG2(0x21 + (((int)txStatus >> 3) & 3), txStatus->buffer, len + 3); -} - -USB_PUBLIC void usbSetInterrupt(uchar *data, uchar len) { usbGenericSetInterrupt(data, len, &usbTxStatus1); } -# endif - -# if USB_CFG_HAVE_INTRIN_ENDPOINT3 -USB_PUBLIC void usbSetInterrupt3(uchar *data, uchar len) { usbGenericSetInterrupt(data, len, &usbTxStatus3); } -# endif -#endif /* USB_CFG_SUPPRESS_INTR_CODE */ - -/* ------------------ utilities for code following below ------------------- */ - -/* Use defines for the switch statement so that we can choose between an - * if()else if() and a switch/case based implementation. switch() is more - * efficient for a LARGE set of sequential choices, if() is better in all other - * cases. - */ -#if USB_CFG_USE_SWITCH_STATEMENT -# define SWITCH_START(cmd) \ - switch (cmd) { \ - { -# define SWITCH_CASE(value) \ - } \ - break; \ - case (value): { -# define SWITCH_CASE2(v1, v2) \ - } \ - break; \ - case (v1): \ - case (v2): { -# define SWITCH_CASE3(v1, v2, v3) \ - } \ - break; \ - case (v1): \ - case (v2): \ - case (v3): { -# define SWITCH_DEFAULT \ - } \ - break; \ - default: { -# define SWITCH_END \ - } \ - } -#else -# define SWITCH_START(cmd) \ - { \ - uchar _cmd = cmd; \ - if (0) { -# define SWITCH_CASE(value) \ - } \ - else if (_cmd == (value)) { -# define SWITCH_CASE2(v1, v2) \ - } \ - else if (_cmd == (v1) || _cmd == (v2)) { -# define SWITCH_CASE3(v1, v2, v3) \ - } \ - else if (_cmd == (v1) || _cmd == (v2) || (_cmd == v3)) { -# define SWITCH_DEFAULT \ - } \ - else { -# define SWITCH_END \ - } \ - } -#endif - -#ifndef USB_RX_USER_HOOK -# define USB_RX_USER_HOOK(data, len) -#endif -#ifndef USB_SET_ADDRESS_HOOK -# define USB_SET_ADDRESS_HOOK() -#endif - -/* ------------------------------------------------------------------------- */ - -/* We use if() instead of #if in the macro below because #if can't be used - * in macros and the compiler optimizes constant conditions anyway. - * This may cause problems with undefined symbols if compiled without - * optimizing! - */ -#define GET_DESCRIPTOR(cfgProp, staticName) \ - if (cfgProp) { \ - if ((cfgProp)&USB_PROP_IS_RAM) flags = 0; \ - if ((cfgProp)&USB_PROP_IS_DYNAMIC) { \ - len = usbFunctionDescriptor(rq); \ - } else { \ - len = USB_PROP_LENGTH(cfgProp); \ - usbMsgPtr = (uchar *)(staticName); \ - } \ - } - -/* usbDriverDescriptor() is similar to usbFunctionDescriptor(), but used - * internally for all types of descriptors. - */ -static inline usbMsgLen_t usbDriverDescriptor(usbRequest_t *rq) { - usbMsgLen_t len = 0; - uchar flags = USB_FLG_MSGPTR_IS_ROM; - - SWITCH_START(rq->wValue.bytes[1]) - SWITCH_CASE(USBDESCR_DEVICE) /* 1 */ - GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_DEVICE, usbDescriptorDevice) - SWITCH_CASE(USBDESCR_CONFIG) /* 2 */ - GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_CONFIGURATION, usbDescriptorConfiguration) - SWITCH_CASE(USBDESCR_STRING) /* 3 */ -#if USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_DYNAMIC - if (USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_RAM) flags = 0; - len = usbFunctionDescriptor(rq); -#else /* USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_DYNAMIC */ - SWITCH_START(rq->wValue.bytes[0]) - SWITCH_CASE(0) - GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_0, usbDescriptorString0) - SWITCH_CASE(1) - GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_VENDOR, usbDescriptorStringVendor) - SWITCH_CASE(2) - GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_PRODUCT, usbDescriptorStringDevice) - SWITCH_CASE(3) - GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER, usbDescriptorStringSerialNumber) - SWITCH_DEFAULT - if (USB_CFG_DESCR_PROPS_UNKNOWN & USB_PROP_IS_DYNAMIC) { - len = usbFunctionDescriptor(rq); - } - SWITCH_END -#endif /* USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_DYNAMIC */ -#if USB_CFG_DESCR_PROPS_HID_REPORT /* only support HID descriptors if enabled */ - SWITCH_CASE(USBDESCR_HID) /* 0x21 */ - GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_HID, usbDescriptorConfiguration + 18) - SWITCH_CASE(USBDESCR_HID_REPORT) /* 0x22 */ - GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_HID_REPORT, usbDescriptorHidReport) -#endif - SWITCH_DEFAULT - if (USB_CFG_DESCR_PROPS_UNKNOWN & USB_PROP_IS_DYNAMIC) { - len = usbFunctionDescriptor(rq); - } - SWITCH_END - usbMsgFlags = flags; - return len; -} - -/* ------------------------------------------------------------------------- */ - -/* usbDriverSetup() is similar to usbFunctionSetup(), but it's used for - * standard requests instead of class and custom requests. - */ -static inline usbMsgLen_t usbDriverSetup(usbRequest_t *rq) { - uchar len = 0, *dataPtr = usbTxBuf + 9; /* there are 2 bytes free space at the end of the buffer */ - uchar value = rq->wValue.bytes[0]; -#if USB_CFG_IMPLEMENT_HALT - uchar index = rq->wIndex.bytes[0]; -#endif - - dataPtr[0] = 0; /* default reply common to USBRQ_GET_STATUS and USBRQ_GET_INTERFACE */ - SWITCH_START(rq->bRequest) - SWITCH_CASE(USBRQ_GET_STATUS) /* 0 */ - uchar recipient = rq->bmRequestType & USBRQ_RCPT_MASK; /* assign arith ops to variables to enforce byte size */ - if (USB_CFG_IS_SELF_POWERED && recipient == USBRQ_RCPT_DEVICE) dataPtr[0] = USB_CFG_IS_SELF_POWERED; -#if USB_CFG_IMPLEMENT_HALT - if (recipient == USBRQ_RCPT_ENDPOINT && index == 0x81) /* request status for endpoint 1 */ - dataPtr[0] = usbTxLen1 == USBPID_STALL; -#endif - dataPtr[1] = 0; - len = 2; -#if USB_CFG_IMPLEMENT_HALT - SWITCH_CASE2(USBRQ_CLEAR_FEATURE, USBRQ_SET_FEATURE) /* 1, 3 */ - if (value == 0 && index == 0x81) { /* feature 0 == HALT for endpoint == 1 */ - usbTxLen1 = rq->bRequest == USBRQ_CLEAR_FEATURE ? USBPID_NAK : USBPID_STALL; - usbResetDataToggling(); - } -#endif - SWITCH_CASE(USBRQ_SET_ADDRESS) /* 5 */ - usbNewDeviceAddr = value; - USB_SET_ADDRESS_HOOK(); - SWITCH_CASE(USBRQ_GET_DESCRIPTOR) /* 6 */ - len = usbDriverDescriptor(rq); - goto skipMsgPtrAssignment; - SWITCH_CASE(USBRQ_GET_CONFIGURATION) /* 8 */ - dataPtr = &usbConfiguration; /* send current configuration value */ - len = 1; - SWITCH_CASE(USBRQ_SET_CONFIGURATION) /* 9 */ - usbConfiguration = value; - usbResetStall(); - SWITCH_CASE(USBRQ_GET_INTERFACE) /* 10 */ - len = 1; -#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE - SWITCH_CASE(USBRQ_SET_INTERFACE) /* 11 */ - usbResetDataToggling(); - usbResetStall(); -#endif - SWITCH_DEFAULT /* 7=SET_DESCRIPTOR, 12=SYNC_FRAME */ - /* Should we add an optional hook here? */ - SWITCH_END usbMsgPtr = dataPtr; -skipMsgPtrAssignment: - return len; -} - -/* ------------------------------------------------------------------------- */ - -/* usbProcessRx() is called for every message received by the interrupt - * routine. It distinguishes between SETUP and DATA packets and processes - * them accordingly. - */ -static inline void usbProcessRx(uchar *data, uchar len) { - usbRequest_t *rq = (void *)data; - - /* usbRxToken can be: - * 0x2d 00101101 (USBPID_SETUP for setup data) - * 0xe1 11100001 (USBPID_OUT: data phase of setup transfer) - * 0...0x0f for OUT on endpoint X - */ - DBG2(0x10 + (usbRxToken & 0xf), data, len + 2); /* SETUP=1d, SETUP-DATA=11, OUTx=1x */ - USB_RX_USER_HOOK(data, len) -#if USB_CFG_IMPLEMENT_FN_WRITEOUT - if (usbRxToken < 0x10) { /* OUT to endpoint != 0: endpoint number in usbRxToken */ - usbFunctionWriteOut(data, len); - return; - } -#endif - if (usbRxToken == (uchar)USBPID_SETUP) { - if (len != 8) /* Setup size must be always 8 bytes. Ignore otherwise. */ - return; - usbMsgLen_t replyLen; - usbTxBuf[0] = USBPID_DATA0; /* initialize data toggling */ - usbTxLen = USBPID_NAK; /* abort pending transmit */ - usbMsgFlags = 0; - uchar type = rq->bmRequestType & USBRQ_TYPE_MASK; - if (type != USBRQ_TYPE_STANDARD) { /* standard requests are handled by driver */ - replyLen = usbFunctionSetup(data); - } else { - replyLen = usbDriverSetup(rq); - } -#if USB_CFG_IMPLEMENT_FN_READ || USB_CFG_IMPLEMENT_FN_WRITE - if (replyLen == USB_NO_MSG) { /* use user-supplied read/write function */ - /* do some conditioning on replyLen, but on IN transfers only */ - if ((rq->bmRequestType & USBRQ_DIR_MASK) != USBRQ_DIR_HOST_TO_DEVICE) { - if (sizeof(replyLen) < sizeof(rq->wLength.word)) { /* help compiler with optimizing */ - replyLen = rq->wLength.bytes[0]; - } else { - replyLen = rq->wLength.word; - } - } - usbMsgFlags = USB_FLG_USE_USER_RW; - } else /* The 'else' prevents that we limit a replyLen of USB_NO_MSG to the maximum transfer len. */ -#endif - if (sizeof(replyLen) < sizeof(rq->wLength.word)) { /* help compiler with optimizing */ - if (!rq->wLength.bytes[1] && replyLen > rq->wLength.bytes[0]) /* limit length to max */ - replyLen = rq->wLength.bytes[0]; - } else { - if (replyLen > rq->wLength.word) /* limit length to max */ - replyLen = rq->wLength.word; - } - usbMsgLen = replyLen; - } else { /* usbRxToken must be USBPID_OUT, which means data phase of setup (control-out) */ -#if USB_CFG_IMPLEMENT_FN_WRITE - if (usbMsgFlags & USB_FLG_USE_USER_RW) { - uchar rval = usbFunctionWrite(data, len); - if (rval == 0xff) { /* an error occurred */ - usbTxLen = USBPID_STALL; - } else if (rval != 0) { /* This was the final package */ - usbMsgLen = 0; /* answer with a zero-sized data packet */ - } - } -#endif - } -} - -/* ------------------------------------------------------------------------- */ - -/* This function is similar to usbFunctionRead(), but it's also called for - * data handled automatically by the driver (e.g. descriptor reads). - */ -static uchar usbDeviceRead(uchar *data, uchar len) { - if (len > 0) { /* don't bother app with 0 sized reads */ -#if USB_CFG_IMPLEMENT_FN_READ - if (usbMsgFlags & USB_FLG_USE_USER_RW) { - len = usbFunctionRead(data, len); - } else -#endif - { - uchar i = len, *r = usbMsgPtr; - if (usbMsgFlags & USB_FLG_MSGPTR_IS_ROM) { /* ROM data */ - do { - uchar c = USB_READ_FLASH(r); /* assign to char size variable to enforce byte ops */ - *data++ = c; - r++; - } while (--i); - } else { /* RAM data */ - do { - *data++ = *r++; - } while (--i); - } - usbMsgPtr = r; - } - } - return len; -} - -/* ------------------------------------------------------------------------- */ - -/* usbBuildTxBlock() is called when we have data to transmit and the - * interrupt routine's transmit buffer is empty. - */ -static inline void usbBuildTxBlock(void) { - usbMsgLen_t wantLen; - uchar len; - - wantLen = usbMsgLen; - if (wantLen > 8) wantLen = 8; - usbMsgLen -= wantLen; - usbTxBuf[0] ^= USBPID_DATA0 ^ USBPID_DATA1; /* DATA toggling */ - len = usbDeviceRead(usbTxBuf + 1, wantLen); - if (len <= 8) { /* valid data packet */ - usbCrc16Append(&usbTxBuf[1], len); - len += 4; /* length including sync byte */ - if (len < 12) /* a partial package identifies end of message */ - usbMsgLen = USB_NO_MSG; - } else { - len = USBPID_STALL; /* stall the endpoint */ - usbMsgLen = USB_NO_MSG; - } - usbTxLen = len; - DBG2(0x20, usbTxBuf, len - 1); -} - -/* ------------------------------------------------------------------------- */ - -static inline void usbHandleResetHook(uchar notResetState) { -#ifdef USB_RESET_HOOK - static uchar wasReset; - uchar isReset = !notResetState; - - if (wasReset != isReset) { - USB_RESET_HOOK(isReset); - wasReset = isReset; - } -#endif -} - -/* ------------------------------------------------------------------------- */ - -USB_PUBLIC void usbPoll(void) { - schar len; - uchar i; - - len = usbRxLen - 3; - if (len >= 0) { - /* We could check CRC16 here -- but ACK has already been sent anyway. If you - * need data integrity checks with this driver, check the CRC in your app - * code and report errors back to the host. Since the ACK was already sent, - * retries must be handled on application level. - * unsigned crc = usbCrc16(buffer + 1, usbRxLen - 3); - */ - usbProcessRx(usbRxBuf + USB_BUFSIZE + 1 - usbInputBufOffset, len); -#if USB_CFG_HAVE_FLOWCONTROL - if (usbRxLen > 0) /* only mark as available if not inactivated */ - usbRxLen = 0; -#else - usbRxLen = 0; /* mark rx buffer as available */ -#endif - } - if (usbTxLen & 0x10) { /* transmit system idle */ - if (usbMsgLen != USB_NO_MSG) { /* transmit data pending? */ - usbBuildTxBlock(); - } - } - for (i = 20; i > 0; i--) { - uchar usbLineStatus = USBIN & USBMASK; - if (usbLineStatus != 0) /* SE0 has ended */ - goto isNotReset; - } - /* RESET condition, called multiple times during reset */ - usbNewDeviceAddr = 0; - usbDeviceAddr = 0; - usbResetStall(); - DBG1(0xff, 0, 0); -isNotReset: - usbHandleResetHook(i); -} - -/* ------------------------------------------------------------------------- */ - -USB_PUBLIC void usbInit(void) { -#if USB_INTR_CFG_SET != 0 - USB_INTR_CFG |= USB_INTR_CFG_SET; -#endif -#if USB_INTR_CFG_CLR != 0 - USB_INTR_CFG &= ~(USB_INTR_CFG_CLR); -#endif - USB_INTR_ENABLE |= (1 << USB_INTR_ENABLE_BIT); - usbResetDataToggling(); -#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE - usbTxLen1 = USBPID_NAK; -# if USB_CFG_HAVE_INTRIN_ENDPOINT3 - usbTxLen3 = USBPID_NAK; -# endif -#endif -} - -/* ------------------------------------------------------------------------- */ diff --git a/tmk_core/protocol/vusb/usbdrv/usbdrv.h b/tmk_core/protocol/vusb/usbdrv/usbdrv.h deleted file mode 100644 index 88a1bce76e..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/usbdrv.h +++ /dev/null @@ -1,730 +0,0 @@ -/* Name: usbdrv.h - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2004-12-29 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: usbdrv.h 793 2010-07-15 15:58:11Z cs $ - */ - -#ifndef __usbdrv_h_included__ -#define __usbdrv_h_included__ -#include "usbconfig.h" -#include "usbportability.h" - -/* -Hardware Prerequisites: -======================= -USB lines D+ and D- MUST be wired to the same I/O port. We recommend that D+ -triggers the interrupt (best achieved by using INT0 for D+), but it is also -possible to trigger the interrupt from D-. If D- is used, interrupts are also -triggered by SOF packets. D- requires a pull-up of 1.5k to +3.5V (and the -device must be powered at 3.5V) to identify as low-speed USB device. A -pull-down or pull-up of 1M SHOULD be connected from D+ to +3.5V to prevent -interference when no USB master is connected. If you use Zener diodes to limit -the voltage on D+ and D-, you MUST use a pull-down resistor, not a pull-up. -We use D+ as interrupt source and not D- because it does not trigger on -keep-alive and RESET states. If you want to count keep-alive events with -USB_COUNT_SOF, you MUST use D- as an interrupt source. - -As a compile time option, the 1.5k pull-up resistor on D- can be made -switchable to allow the device to disconnect at will. See the definition of -usbDeviceConnect() and usbDeviceDisconnect() further down in this file. - -Please adapt the values in usbconfig.h according to your hardware! - -The device MUST be clocked at exactly 12 MHz, 15 MHz, 16 MHz or 20 MHz -or at 12.8 MHz resp. 16.5 MHz +/- 1%. See usbconfig-prototype.h for details. - - -Limitations: -============ -Robustness with respect to communication errors: -The driver assumes error-free communication. It DOES check for errors in -the PID, but does NOT check bit stuffing errors, SE0 in middle of a byte, -token CRC (5 bit) and data CRC (16 bit). CRC checks can not be performed due -to timing constraints: We must start sending a reply within 7 bit times. -Bit stuffing and misplaced SE0 would have to be checked in real-time, but CPU -performance does not permit that. The driver does not check Data0/Data1 -toggling, but application software can implement the check. - -Input characteristics: -Since no differential receiver circuit is used, electrical interference -robustness may suffer. The driver samples only one of the data lines with -an ordinary I/O pin's input characteristics. However, since this is only a -low speed USB implementation and the specification allows for 8 times the -bit rate over the same hardware, we should be on the safe side. Even the spec -requires detection of asymmetric states at high bit rate for SE0 detection. - -Number of endpoints: -The driver supports the following endpoints: - -- Endpoint 0, the default control endpoint. -- Any number of interrupt- or bulk-out endpoints. The data is sent to - usbFunctionWriteOut() and USB_CFG_IMPLEMENT_FN_WRITEOUT must be defined - to 1 to activate this feature. The endpoint number can be found in the - global variable 'usbRxToken'. -- One default interrupt- or bulk-in endpoint. This endpoint is used for - interrupt- or bulk-in transfers which are not handled by any other endpoint. - You must define USB_CFG_HAVE_INTRIN_ENDPOINT in order to activate this - feature and call usbSetInterrupt() to send interrupt/bulk data. -- One additional interrupt- or bulk-in endpoint. This was endpoint 3 in - previous versions of this driver but can now be configured to any endpoint - number. You must define USB_CFG_HAVE_INTRIN_ENDPOINT3 in order to activate - this feature and call usbSetInterrupt3() to send interrupt/bulk data. The - endpoint number can be set with USB_CFG_EP3_NUMBER. - -Please note that the USB standard forbids bulk endpoints for low speed devices! -Most operating systems allow them anyway, but the AVR will spend 90% of the CPU -time in the USB interrupt polling for bulk data. - -Maximum data payload: -Data payload of control in and out transfers may be up to 254 bytes. In order -to accept payload data of out transfers, you need to implement -'usbFunctionWrite()'. - -USB Suspend Mode supply current: -The USB standard limits power consumption to 500uA when the bus is in suspend -mode. This is not a problem for self-powered devices since they don't need -bus power anyway. Bus-powered devices can achieve this only by putting the -CPU in sleep mode. The driver does not implement suspend handling by itself. -However, the application may implement activity monitoring and wakeup from -sleep. The host sends regular SE0 states on the bus to keep it active. These -SE0 states can be detected by using D- as the interrupt source. Define -USB_COUNT_SOF to 1 and use the global variable usbSofCount to check for bus -activity. - -Operation without an USB master: -The driver behaves neutral without connection to an USB master if D- reads -as 1. To avoid spurious interrupts, we recommend a high impedance (e.g. 1M) -pull-down or pull-up resistor on D+ (interrupt). If Zener diodes are used, -use a pull-down. If D- becomes statically 0, the driver may block in the -interrupt routine. - -Interrupt latency: -The application must ensure that the USB interrupt is not disabled for more -than 25 cycles (this is for 12 MHz, faster clocks allow longer latency). -This implies that all interrupt routines must either have the "ISR_NOBLOCK" -attribute set (see "avr/interrupt.h") or be written in assembler with "sei" -as the first instruction. - -Maximum interrupt duration / CPU cycle consumption: -The driver handles all USB communication during the interrupt service -routine. The routine will not return before an entire USB message is received -and the reply is sent. This may be up to ca. 1200 cycles @ 12 MHz (= 100us) if -the host conforms to the standard. The driver will consume CPU cycles for all -USB messages, even if they address another (low-speed) device on the same bus. - -*/ - -/* ------------------------------------------------------------------------- */ -/* --------------------------- Module Interface ---------------------------- */ -/* ------------------------------------------------------------------------- */ - -#define USBDRV_VERSION 20100715 -/* This define uniquely identifies a driver version. It is a decimal number - * constructed from the driver's release date in the form YYYYMMDD. If the - * driver's behavior or interface changes, you can use this constant to - * distinguish versions. If it is not defined, the driver's release date is - * older than 2006-01-25. - */ - -#ifndef USB_PUBLIC -# define USB_PUBLIC -#endif -/* USB_PUBLIC is used as declaration attribute for all functions exported by - * the USB driver. The default is no attribute (see above). You may define it - * to static either in usbconfig.h or from the command line if you include - * usbdrv.c instead of linking against it. Including the C module of the driver - * directly in your code saves a couple of bytes in flash memory. - */ - -#ifndef __ASSEMBLER__ -# ifndef uchar -# define uchar unsigned char -# endif -# ifndef schar -# define schar signed char -# endif -/* shortcuts for well defined 8 bit integer types */ - -# if USB_CFG_LONG_TRANSFERS /* if more than 254 bytes transfer size required */ -# define usbMsgLen_t unsigned -# else -# define usbMsgLen_t uchar -# endif -/* usbMsgLen_t is the data type used for transfer lengths. By default, it is - * defined to uchar, allowing a maximum of 254 bytes (255 is reserved for - * USB_NO_MSG below). If the usbconfig.h defines USB_CFG_LONG_TRANSFERS to 1, - * a 16 bit data type is used, allowing up to 16384 bytes (the rest is used - * for flags in the descriptor configuration). - */ -# define USB_NO_MSG ((usbMsgLen_t)-1) /* constant meaning "no message" */ - -struct usbRequest; /* forward declaration */ - -USB_PUBLIC void usbInit(void); -/* This function must be called before interrupts are enabled and the main - * loop is entered. We exepct that the PORT and DDR bits for D+ and D- have - * not been changed from their default status (which is 0). If you have changed - * them, set both back to 0 (configure them as input with no internal pull-up). - */ -USB_PUBLIC void usbPoll(void); -/* This function must be called at regular intervals from the main loop. - * Maximum delay between calls is somewhat less than 50ms (USB timeout for - * accepting a Setup message). Otherwise the device will not be recognized. - * Please note that debug outputs through the UART take ~ 0.5ms per byte - * at 19200 bps. - */ -extern uchar *usbMsgPtr; -/* This variable may be used to pass transmit data to the driver from the - * implementation of usbFunctionWrite(). It is also used internally by the - * driver for standard control requests. - */ -USB_PUBLIC usbMsgLen_t usbFunctionSetup(uchar data[8]); -/* This function is called when the driver receives a SETUP transaction from - * the host which is not answered by the driver itself (in practice: class and - * vendor requests). All control transfers start with a SETUP transaction where - * the host communicates the parameters of the following (optional) data - * transfer. The SETUP data is available in the 'data' parameter which can - * (and should) be casted to 'usbRequest_t *' for a more user-friendly access - * to parameters. - * - * If the SETUP indicates a control-in transfer, you should provide the - * requested data to the driver. There are two ways to transfer this data: - * (1) Set the global pointer 'usbMsgPtr' to the base of the static RAM data - * block and return the length of the data in 'usbFunctionSetup()'. The driver - * will handle the rest. Or (2) return USB_NO_MSG in 'usbFunctionSetup()'. The - * driver will then call 'usbFunctionRead()' when data is needed. See the - * documentation for usbFunctionRead() for details. - * - * If the SETUP indicates a control-out transfer, the only way to receive the - * data from the host is through the 'usbFunctionWrite()' call. If you - * implement this function, you must return USB_NO_MSG in 'usbFunctionSetup()' - * to indicate that 'usbFunctionWrite()' should be used. See the documentation - * of this function for more information. If you just want to ignore the data - * sent by the host, return 0 in 'usbFunctionSetup()'. - * - * Note that calls to the functions usbFunctionRead() and usbFunctionWrite() - * are only done if enabled by the configuration in usbconfig.h. - */ -USB_PUBLIC usbMsgLen_t usbFunctionDescriptor(struct usbRequest *rq); -/* You need to implement this function ONLY if you provide USB descriptors at - * runtime (which is an expert feature). It is very similar to - * usbFunctionSetup() above, but it is called only to request USB descriptor - * data. See the documentation of usbFunctionSetup() above for more info. - */ -# if USB_CFG_HAVE_INTRIN_ENDPOINT -USB_PUBLIC void usbSetInterrupt(uchar *data, uchar len); -/* This function sets the message which will be sent during the next interrupt - * IN transfer. The message is copied to an internal buffer and must not exceed - * a length of 8 bytes. The message may be 0 bytes long just to indicate the - * interrupt status to the host. - * If you need to transfer more bytes, use a control read after the interrupt. - */ -# define usbInterruptIsReady() (usbTxLen1 & 0x10) -/* This macro indicates whether the last interrupt message has already been - * sent. If you set a new interrupt message before the old was sent, the - * message already buffered will be lost. - */ -# if USB_CFG_HAVE_INTRIN_ENDPOINT3 -USB_PUBLIC void usbSetInterrupt3(uchar *data, uchar len); -# define usbInterruptIsReady3() (usbTxLen3 & 0x10) -/* Same as above for endpoint 3 */ -# endif -# endif /* USB_CFG_HAVE_INTRIN_ENDPOINT */ -# if USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH /* simplified interface for backward compatibility */ -# define usbHidReportDescriptor usbDescriptorHidReport -/* should be declared as: PROGMEM char usbHidReportDescriptor[]; */ -/* If you implement an HID device, you need to provide a report descriptor. - * The HID report descriptor syntax is a bit complex. If you understand how - * report descriptors are constructed, we recommend that you use the HID - * Descriptor Tool from usb.org, see http://www.usb.org/developers/hidpage/. - * Otherwise you should probably start with a working example. - */ -# endif /* USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH */ -# if USB_CFG_IMPLEMENT_FN_WRITE -USB_PUBLIC uchar usbFunctionWrite(uchar *data, uchar len); -/* This function is called by the driver to provide a control transfer's - * payload data (control-out). It is called in chunks of up to 8 bytes. The - * total count provided in the current control transfer can be obtained from - * the 'length' property in the setup data. If an error occurred during - * processing, return 0xff (== -1). The driver will answer the entire transfer - * with a STALL token in this case. If you have received the entire payload - * successfully, return 1. If you expect more data, return 0. If you don't - * know whether the host will send more data (you should know, the total is - * provided in the usbFunctionSetup() call!), return 1. - * NOTE: If you return 0xff for STALL, 'usbFunctionWrite()' may still be called - * for the remaining data. You must continue to return 0xff for STALL in these - * calls. - * In order to get usbFunctionWrite() called, define USB_CFG_IMPLEMENT_FN_WRITE - * to 1 in usbconfig.h and return 0xff in usbFunctionSetup().. - */ -# endif /* USB_CFG_IMPLEMENT_FN_WRITE */ -# if USB_CFG_IMPLEMENT_FN_READ -USB_PUBLIC uchar usbFunctionRead(uchar *data, uchar len); -/* This function is called by the driver to ask the application for a control - * transfer's payload data (control-in). It is called in chunks of up to 8 - * bytes each. You should copy the data to the location given by 'data' and - * return the actual number of bytes copied. If you return less than requested, - * the control-in transfer is terminated. If you return 0xff, the driver aborts - * the transfer with a STALL token. - * In order to get usbFunctionRead() called, define USB_CFG_IMPLEMENT_FN_READ - * to 1 in usbconfig.h and return 0xff in usbFunctionSetup().. - */ -# endif /* USB_CFG_IMPLEMENT_FN_READ */ - -extern uchar usbRxToken; /* may be used in usbFunctionWriteOut() below */ -# if USB_CFG_IMPLEMENT_FN_WRITEOUT -USB_PUBLIC void usbFunctionWriteOut(uchar *data, uchar len); -/* This function is called by the driver when data is received on an interrupt- - * or bulk-out endpoint. The endpoint number can be found in the global - * variable usbRxToken. You must define USB_CFG_IMPLEMENT_FN_WRITEOUT to 1 in - * usbconfig.h to get this function called. - */ -# endif /* USB_CFG_IMPLEMENT_FN_WRITEOUT */ -# ifdef USB_CFG_PULLUP_IOPORTNAME -# define usbDeviceConnect() ((USB_PULLUP_DDR |= (1 << USB_CFG_PULLUP_BIT)), (USB_PULLUP_OUT |= (1 << USB_CFG_PULLUP_BIT))) -# define usbDeviceDisconnect() ((USB_PULLUP_DDR &= ~(1 << USB_CFG_PULLUP_BIT)), (USB_PULLUP_OUT &= ~(1 << USB_CFG_PULLUP_BIT))) -# else /* USB_CFG_PULLUP_IOPORTNAME */ -# define usbDeviceConnect() (USBDDR &= ~(1 << USBMINUS)) -# define usbDeviceDisconnect() (USBDDR |= (1 << USBMINUS)) -# endif /* USB_CFG_PULLUP_IOPORTNAME */ -/* The macros usbDeviceConnect() and usbDeviceDisconnect() (intended to look - * like a function) connect resp. disconnect the device from the host's USB. - * If the constants USB_CFG_PULLUP_IOPORT and USB_CFG_PULLUP_BIT are defined - * in usbconfig.h, a disconnect consists of removing the pull-up resisitor - * from D-, otherwise the disconnect is done by brute-force pulling D- to GND. - * This does not conform to the spec, but it works. - * Please note that the USB interrupt must be disabled while the device is - * in disconnected state, or the interrupt handler will hang! You can either - * turn off the USB interrupt selectively with - * USB_INTR_ENABLE &= ~(1 << USB_INTR_ENABLE_BIT) - * or use cli() to disable interrupts globally. - */ -extern unsigned usbCrc16(unsigned data, uchar len); -# define usbCrc16(data, len) usbCrc16((unsigned)(data), len) -/* This function calculates the binary complement of the data CRC used in - * USB data packets. The value is used to build raw transmit packets. - * You may want to use this function for data checksums or to verify received - * data. We enforce 16 bit calling conventions for compatibility with IAR's - * tiny memory model. - */ -extern unsigned usbCrc16Append(unsigned data, uchar len); -# define usbCrc16Append(data, len) usbCrc16Append((unsigned)(data), len) -/* This function is equivalent to usbCrc16() above, except that it appends - * the 2 bytes CRC (lowbyte first) in the 'data' buffer after reading 'len' - * bytes. - */ -# if USB_CFG_HAVE_MEASURE_FRAME_LENGTH -extern unsigned usbMeasureFrameLength(void); -/* This function MUST be called IMMEDIATELY AFTER USB reset and measures 1/7 of - * the number of CPU cycles during one USB frame minus one low speed bit - * length. In other words: return value = 1499 * (F_CPU / 10.5 MHz) - * Since this is a busy wait, you MUST disable all interrupts with cli() before - * calling this function. - * This can be used to calibrate the AVR's RC oscillator. - */ -# endif -extern uchar usbConfiguration; -/* This value contains the current configuration set by the host. The driver - * allows setting and querying of this variable with the USB SET_CONFIGURATION - * and GET_CONFIGURATION requests, but does not use it otherwise. - * You may want to reflect the "configured" status with a LED on the device or - * switch on high power parts of the circuit only if the device is configured. - */ -# if USB_COUNT_SOF -extern volatile uchar usbSofCount; -/* This variable is incremented on every SOF packet. It is only available if - * the macro USB_COUNT_SOF is defined to a value != 0. - */ -# endif -# if USB_CFG_CHECK_DATA_TOGGLING -extern uchar usbCurrentDataToken; -/* This variable can be checked in usbFunctionWrite() and usbFunctionWriteOut() - * to ignore duplicate packets. - */ -# endif - -# define USB_STRING_DESCRIPTOR_HEADER(stringLength) ((2 * (stringLength) + 2) | (3 << 8)) -/* This macro builds a descriptor header for a string descriptor given the - * string's length. See usbdrv.c for an example how to use it. - */ -# if USB_CFG_HAVE_FLOWCONTROL -extern volatile schar usbRxLen; -# define usbDisableAllRequests() usbRxLen = -1 -/* Must be called from usbFunctionWrite(). This macro disables all data input - * from the USB interface. Requests from the host are answered with a NAK - * while they are disabled. - */ -# define usbEnableAllRequests() usbRxLen = 0 -/* May only be called if requests are disabled. This macro enables input from - * the USB interface after it has been disabled with usbDisableAllRequests(). - */ -# define usbAllRequestsAreDisabled() (usbRxLen < 0) -/* Use this macro to find out whether requests are disabled. It may be needed - * to ensure that usbEnableAllRequests() is never called when requests are - * enabled. - */ -# endif - -# define USB_SET_DATATOKEN1(token) usbTxBuf1[0] = token -# define USB_SET_DATATOKEN3(token) usbTxBuf3[0] = token -/* These two macros can be used by application software to reset data toggling - * for interrupt-in endpoints 1 and 3. Since the token is toggled BEFORE - * sending data, you must set the opposite value of the token which should come - * first. - */ - -#endif /* __ASSEMBLER__ */ - -/* ------------------------------------------------------------------------- */ -/* ----------------- Definitions for Descriptor Properties ----------------- */ -/* ------------------------------------------------------------------------- */ -/* This is advanced stuff. See usbconfig-prototype.h for more information - * about the various methods to define USB descriptors. If you do nothing, - * the default descriptors will be used. - */ -#define USB_PROP_IS_DYNAMIC (1 << 14) -/* If this property is set for a descriptor, usbFunctionDescriptor() will be - * used to obtain the particular descriptor. Data directly returned via - * usbMsgPtr are FLASH data by default, combine (OR) with USB_PROP_IS_RAM to - * return RAM data. - */ -#define USB_PROP_IS_RAM (1 << 15) -/* If this property is set for a descriptor, the data is read from RAM - * memory instead of Flash. The property is used for all methods to provide - * external descriptors. - */ -#define USB_PROP_LENGTH(len) ((len)&0x3fff) -/* If a static external descriptor is used, this is the total length of the - * descriptor in bytes. - */ - -/* all descriptors which may have properties: */ -#ifndef USB_CFG_DESCR_PROPS_DEVICE -# define USB_CFG_DESCR_PROPS_DEVICE 0 -#endif -#ifndef USB_CFG_DESCR_PROPS_CONFIGURATION -# define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#endif -#ifndef USB_CFG_DESCR_PROPS_STRINGS -# define USB_CFG_DESCR_PROPS_STRINGS 0 -#endif -#ifndef USB_CFG_DESCR_PROPS_STRING_0 -# define USB_CFG_DESCR_PROPS_STRING_0 0 -#endif -#ifndef USB_CFG_DESCR_PROPS_STRING_VENDOR -# define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#endif -#ifndef USB_CFG_DESCR_PROPS_STRING_PRODUCT -# define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#endif -#ifndef USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER -# define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 -#endif -#ifndef USB_CFG_DESCR_PROPS_HID -# define USB_CFG_DESCR_PROPS_HID 0 -#endif -#if !(USB_CFG_DESCR_PROPS_HID_REPORT) -# undef USB_CFG_DESCR_PROPS_HID_REPORT -# if USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH /* do some backward compatibility tricks */ -# define USB_CFG_DESCR_PROPS_HID_REPORT USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH -# else -# define USB_CFG_DESCR_PROPS_HID_REPORT 0 -# endif -#endif -#ifndef USB_CFG_DESCR_PROPS_UNKNOWN -# define USB_CFG_DESCR_PROPS_UNKNOWN 0 -#endif - -/* ------------------ forward declaration of descriptors ------------------- */ -/* If you use external static descriptors, they must be stored in global - * arrays as declared below: - */ -#ifndef __ASSEMBLER__ -extern -# if !(USB_CFG_DESCR_PROPS_DEVICE & USB_PROP_IS_RAM) - PROGMEM -# endif - const char usbDescriptorDevice[]; - -extern -# if !(USB_CFG_DESCR_PROPS_CONFIGURATION & USB_PROP_IS_RAM) - PROGMEM -# endif - const char usbDescriptorConfiguration[]; - -extern -# if !(USB_CFG_DESCR_PROPS_HID_REPORT & USB_PROP_IS_RAM) - PROGMEM -# endif - const char usbDescriptorHidReport[]; - -extern -# if !(USB_CFG_DESCR_PROPS_STRING_0 & USB_PROP_IS_RAM) - PROGMEM -# endif - const char usbDescriptorString0[]; - -extern -# if !(USB_CFG_DESCR_PROPS_STRING_VENDOR & USB_PROP_IS_RAM) - PROGMEM -# endif - const int usbDescriptorStringVendor[]; - -extern -# if !(USB_CFG_DESCR_PROPS_STRING_PRODUCT & USB_PROP_IS_RAM) - PROGMEM -# endif - const int usbDescriptorStringDevice[]; - -extern -# if !(USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER & USB_PROP_IS_RAM) - PROGMEM -# endif - const int usbDescriptorStringSerialNumber[]; - -#endif /* __ASSEMBLER__ */ - -/* ------------------------------------------------------------------------- */ -/* ------------------------ General Purpose Macros ------------------------- */ -/* ------------------------------------------------------------------------- */ - -#define USB_CONCAT(a, b) a##b -#define USB_CONCAT_EXPANDED(a, b) USB_CONCAT(a, b) - -#define USB_OUTPORT(name) USB_CONCAT(PORT, name) -#define USB_INPORT(name) USB_CONCAT(PIN, name) -#define USB_DDRPORT(name) USB_CONCAT(DDR, name) -/* The double-define trick above lets us concatenate strings which are - * defined by macros. - */ - -/* ------------------------------------------------------------------------- */ -/* ------------------------- Constant definitions -------------------------- */ -/* ------------------------------------------------------------------------- */ - -#if !defined __ASSEMBLER__ && (!defined USB_CFG_VENDOR_ID || !defined USB_CFG_DEVICE_ID) -# warning "You should define USB_CFG_VENDOR_ID and USB_CFG_DEVICE_ID in usbconfig.h" -/* If the user has not defined IDs, we default to obdev's free IDs. - * See USB-IDs-for-free.txt for details. - */ -#endif - -/* make sure we have a VID and PID defined, byte order is lowbyte, highbyte */ -#ifndef USB_CFG_VENDOR_ID -# define USB_CFG_VENDOR_ID 0xc0, 0x16 /* = 0x16c0 = 5824 = voti.nl */ -#endif - -#ifndef USB_CFG_DEVICE_ID -# if USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH -# define USB_CFG_DEVICE_ID 0xdf, 0x05 /* = 0x5df = 1503, shared PID for HIDs */ -# elif USB_CFG_INTERFACE_CLASS == 2 -# define USB_CFG_DEVICE_ID 0xe1, 0x05 /* = 0x5e1 = 1505, shared PID for CDC Modems */ -# else -# define USB_CFG_DEVICE_ID 0xdc, 0x05 /* = 0x5dc = 1500, obdev's free PID */ -# endif -#endif - -/* Derive Output, Input and DataDirection ports from port names */ -#ifndef USB_CFG_IOPORTNAME -# error "You must define USB_CFG_IOPORTNAME in usbconfig.h, see usbconfig-prototype.h" -#endif - -#define USBOUT USB_OUTPORT(USB_CFG_IOPORTNAME) -#define USB_PULLUP_OUT USB_OUTPORT(USB_CFG_PULLUP_IOPORTNAME) -#define USBIN USB_INPORT(USB_CFG_IOPORTNAME) -#define USBDDR USB_DDRPORT(USB_CFG_IOPORTNAME) -#define USB_PULLUP_DDR USB_DDRPORT(USB_CFG_PULLUP_IOPORTNAME) - -#define USBMINUS USB_CFG_DMINUS_BIT -#define USBPLUS USB_CFG_DPLUS_BIT -#define USBIDLE (1 << USB_CFG_DMINUS_BIT) /* value representing J state */ -#define USBMASK ((1 << USB_CFG_DPLUS_BIT) | (1 << USB_CFG_DMINUS_BIT)) /* mask for USB I/O bits */ - -/* defines for backward compatibility with older driver versions: */ -#define USB_CFG_IOPORT USB_OUTPORT(USB_CFG_IOPORTNAME) -#ifdef USB_CFG_PULLUP_IOPORTNAME -# define USB_CFG_PULLUP_IOPORT USB_OUTPORT(USB_CFG_PULLUP_IOPORTNAME) -#endif - -#ifndef USB_CFG_EP3_NUMBER /* if not defined in usbconfig.h */ -# define USB_CFG_EP3_NUMBER 3 -#endif - -#ifndef USB_CFG_HAVE_INTRIN_ENDPOINT3 -# define USB_CFG_HAVE_INTRIN_ENDPOINT3 0 -#endif - -#define USB_BUFSIZE 11 /* PID, 8 bytes data, 2 bytes CRC */ - -/* ----- Try to find registers and bits responsible for ext interrupt 0 ----- */ - -#ifndef USB_INTR_CFG /* allow user to override our default */ -# if defined EICRA -# define USB_INTR_CFG EICRA -# else -# define USB_INTR_CFG MCUCR -# endif -#endif -#ifndef USB_INTR_CFG_SET /* allow user to override our default */ -# if defined(USB_COUNT_SOF) || defined(USB_SOF_HOOK) -# define USB_INTR_CFG_SET (1 << ISC01) /* cfg for falling edge */ - /* If any SOF logic is used, the interrupt must be wired to D- where - * we better trigger on falling edge - */ -# else -# define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) /* cfg for rising edge */ -# endif -#endif -#ifndef USB_INTR_CFG_CLR /* allow user to override our default */ -# define USB_INTR_CFG_CLR 0 /* no bits to clear */ -#endif - -#ifndef USB_INTR_ENABLE /* allow user to override our default */ -# if defined GIMSK -# define USB_INTR_ENABLE GIMSK -# elif defined EIMSK -# define USB_INTR_ENABLE EIMSK -# else -# define USB_INTR_ENABLE GICR -# endif -#endif -#ifndef USB_INTR_ENABLE_BIT /* allow user to override our default */ -# define USB_INTR_ENABLE_BIT INT0 -#endif - -#ifndef USB_INTR_PENDING /* allow user to override our default */ -# if defined EIFR -# define USB_INTR_PENDING EIFR -# else -# define USB_INTR_PENDING GIFR -# endif -#endif -#ifndef USB_INTR_PENDING_BIT /* allow user to override our default */ -# define USB_INTR_PENDING_BIT INTF0 -#endif - -/* -The defines above don't work for the following chips -at90c8534: no ISC0?, no PORTB, can't find a data sheet -at86rf401: no PORTB, no MCUCR etc, low clock rate -atmega103: no ISC0? (maybe omission in header, can't find data sheet) -atmega603: not defined in avr-libc -at43usb320, at43usb355, at76c711: have USB anyway -at94k: is different... - -at90s1200, attiny11, attiny12, attiny15, attiny28: these have no RAM -*/ - -/* ------------------------------------------------------------------------- */ -/* ----------------- USB Specification Constants and Types ----------------- */ -/* ------------------------------------------------------------------------- */ - -/* USB Token values */ -#define USBPID_SETUP 0x2d -#define USBPID_OUT 0xe1 -#define USBPID_IN 0x69 -#define USBPID_DATA0 0xc3 -#define USBPID_DATA1 0x4b - -#define USBPID_ACK 0xd2 -#define USBPID_NAK 0x5a -#define USBPID_STALL 0x1e - -#ifndef USB_INITIAL_DATATOKEN -# define USB_INITIAL_DATATOKEN USBPID_DATA1 -#endif - -#ifndef __ASSEMBLER__ - -typedef struct usbTxStatus { - volatile uchar len; - uchar buffer[USB_BUFSIZE]; -} usbTxStatus_t; - -extern usbTxStatus_t usbTxStatus1, usbTxStatus3; -# define usbTxLen1 usbTxStatus1.len -# define usbTxBuf1 usbTxStatus1.buffer -# define usbTxLen3 usbTxStatus3.len -# define usbTxBuf3 usbTxStatus3.buffer - -typedef union usbWord { - unsigned word; - uchar bytes[2]; -} usbWord_t; - -typedef struct usbRequest { - uchar bmRequestType; - uchar bRequest; - usbWord_t wValue; - usbWord_t wIndex; - usbWord_t wLength; -} usbRequest_t; -/* This structure matches the 8 byte setup request */ -#endif - -/* bmRequestType field in USB setup: - * d t t r r r r r, where - * d ..... direction: 0=host->device, 1=device->host - * t ..... type: 0=standard, 1=class, 2=vendor, 3=reserved - * r ..... recipient: 0=device, 1=interface, 2=endpoint, 3=other - */ - -/* USB setup recipient values */ -#define USBRQ_RCPT_MASK 0x1f -#define USBRQ_RCPT_DEVICE 0 -#define USBRQ_RCPT_INTERFACE 1 -#define USBRQ_RCPT_ENDPOINT 2 - -/* USB request type values */ -#define USBRQ_TYPE_MASK 0x60 -#define USBRQ_TYPE_STANDARD (0 << 5) -#define USBRQ_TYPE_CLASS (1 << 5) -#define USBRQ_TYPE_VENDOR (2 << 5) - -/* USB direction values: */ -#define USBRQ_DIR_MASK 0x80 -#define USBRQ_DIR_HOST_TO_DEVICE (0 << 7) -#define USBRQ_DIR_DEVICE_TO_HOST (1 << 7) - -/* USB Standard Requests */ -#define USBRQ_GET_STATUS 0 -#define USBRQ_CLEAR_FEATURE 1 -#define USBRQ_SET_FEATURE 3 -#define USBRQ_SET_ADDRESS 5 -#define USBRQ_GET_DESCRIPTOR 6 -#define USBRQ_SET_DESCRIPTOR 7 -#define USBRQ_GET_CONFIGURATION 8 -#define USBRQ_SET_CONFIGURATION 9 -#define USBRQ_GET_INTERFACE 10 -#define USBRQ_SET_INTERFACE 11 -#define USBRQ_SYNCH_FRAME 12 - -/* USB descriptor constants */ -#define USBDESCR_DEVICE 1 -#define USBDESCR_CONFIG 2 -#define USBDESCR_STRING 3 -#define USBDESCR_INTERFACE 4 -#define USBDESCR_ENDPOINT 5 -#define USBDESCR_HID 0x21 -#define USBDESCR_HID_REPORT 0x22 -#define USBDESCR_HID_PHYS 0x23 - -//#define USBATTR_BUSPOWER 0x80 // USB 1.1 does not define this value any more -#define USBATTR_SELFPOWER 0x40 -#define USBATTR_REMOTEWAKE 0x20 - -/* USB HID Requests */ -#define USBRQ_HID_GET_REPORT 0x01 -#define USBRQ_HID_GET_IDLE 0x02 -#define USBRQ_HID_GET_PROTOCOL 0x03 -#define USBRQ_HID_SET_REPORT 0x09 -#define USBRQ_HID_SET_IDLE 0x0a -#define USBRQ_HID_SET_PROTOCOL 0x0b - -/* ------------------------------------------------------------------------- */ - -#endif /* __usbdrv_h_included__ */ diff --git a/tmk_core/protocol/vusb/usbdrv/usbdrvasm.S b/tmk_core/protocol/vusb/usbdrv/usbdrvasm.S deleted file mode 100644 index 2e8097da9c..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/usbdrvasm.S +++ /dev/null @@ -1,393 +0,0 @@ -/* Name: usbdrvasm.S - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2007-06-13 - * Tabsize: 4 - * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * Revision: $Id: usbdrvasm.S 785 2010-05-30 17:57:07Z cs $ - */ - -/* -General Description: -This module is the assembler part of the USB driver. This file contains -general code (preprocessor acrobatics and CRC computation) and then includes -the file appropriate for the given clock rate. -*/ - -#define __SFR_OFFSET 0 /* used by avr-libc's register definitions */ -#include "usbportability.h" -#include "usbdrv.h" /* for common defs */ - -/* register names */ -#define x1 r16 -#define x2 r17 -#define shift r18 -#define cnt r19 -#define x3 r20 -#define x4 r21 -#define x5 r22 -#define bitcnt x5 -#define phase x4 -#define leap x4 - -/* Some assembler dependent definitions and declarations: */ - -#ifdef __IAR_SYSTEMS_ASM__ - extern usbRxBuf, usbDeviceAddr, usbNewDeviceAddr, usbInputBufOffset - extern usbCurrentTok, usbRxLen, usbRxToken, usbTxLen - extern usbTxBuf, usbTxStatus1, usbTxStatus3 -# if USB_COUNT_SOF - extern usbSofCount -# endif - public usbCrc16 - public usbCrc16Append - - COMMON INTVEC -# ifndef USB_INTR_VECTOR - ORG INT0_vect -# else /* USB_INTR_VECTOR */ - ORG USB_INTR_VECTOR -# undef USB_INTR_VECTOR -# endif /* USB_INTR_VECTOR */ -# define USB_INTR_VECTOR usbInterruptHandler - rjmp USB_INTR_VECTOR - RSEG CODE - -#else /* __IAR_SYSTEMS_ASM__ */ - -# ifndef USB_INTR_VECTOR /* default to hardware interrupt INT0 */ -# ifdef INT0_vect -# define USB_INTR_VECTOR INT0_vect // this is the "new" define for the vector -# else -# define USB_INTR_VECTOR SIG_INTERRUPT0 // this is the "old" vector -# endif -# endif - .text - .global USB_INTR_VECTOR - .type USB_INTR_VECTOR, @function - .global usbCrc16 - .global usbCrc16Append -#endif /* __IAR_SYSTEMS_ASM__ */ - - -#if USB_INTR_PENDING < 0x40 /* This is an I/O address, use in and out */ -# define USB_LOAD_PENDING(reg) in reg, USB_INTR_PENDING -# define USB_STORE_PENDING(reg) out USB_INTR_PENDING, reg -#else /* It's a memory address, use lds and sts */ -# define USB_LOAD_PENDING(reg) lds reg, USB_INTR_PENDING -# define USB_STORE_PENDING(reg) sts USB_INTR_PENDING, reg -#endif - -#define usbTxLen1 usbTxStatus1 -#define usbTxBuf1 (usbTxStatus1 + 1) -#define usbTxLen3 usbTxStatus3 -#define usbTxBuf3 (usbTxStatus3 + 1) - - -;---------------------------------------------------------------------------- -; Utility functions -;---------------------------------------------------------------------------- - -#ifdef __IAR_SYSTEMS_ASM__ -/* Register assignments for usbCrc16 on IAR cc */ -/* Calling conventions on IAR: - * First parameter passed in r16/r17, second in r18/r19 and so on. - * Callee must preserve r4-r15, r24-r29 (r28/r29 is frame pointer) - * Result is passed in r16/r17 - * In case of the "tiny" memory model, pointers are only 8 bit with no - * padding. We therefore pass argument 1 as "16 bit unsigned". - */ -RTMODEL "__rt_version", "3" -/* The line above will generate an error if cc calling conventions change. - * The value "3" above is valid for IAR 4.10B/W32 - */ -# define argLen r18 /* argument 2 */ -# define argPtrL r16 /* argument 1 */ -# define argPtrH r17 /* argument 1 */ - -# define resCrcL r16 /* result */ -# define resCrcH r17 /* result */ - -# define ptrL ZL -# define ptrH ZH -# define ptr Z -# define byte r22 -# define bitCnt r19 -# define polyL r20 -# define polyH r21 -# define scratch r23 - -#else /* __IAR_SYSTEMS_ASM__ */ -/* Register assignments for usbCrc16 on gcc */ -/* Calling conventions on gcc: - * First parameter passed in r24/r25, second in r22/23 and so on. - * Callee must preserve r1-r17, r28/r29 - * Result is passed in r24/r25 - */ -# define argLen r22 /* argument 2 */ -# define argPtrL r24 /* argument 1 */ -# define argPtrH r25 /* argument 1 */ - -# define resCrcL r24 /* result */ -# define resCrcH r25 /* result */ - -# define ptrL XL -# define ptrH XH -# define ptr x -# define byte r18 -# define bitCnt r19 -# define polyL r20 -# define polyH r21 -# define scratch r23 - -#endif - -#if USB_USE_FAST_CRC - -; This implementation is faster, but has bigger code size -; Thanks to Slawomir Fras (BoskiDialer) for this code! -; It implements the following C pseudo-code: -; unsigned table(unsigned char x) -; { -; unsigned value; -; -; value = (unsigned)x << 6; -; value ^= (unsigned)x << 7; -; if(parity(x)) -; value ^= 0xc001; -; return value; -; } -; unsigned usbCrc16(unsigned char *argPtr, unsigned char argLen) -; { -; unsigned crc = 0xffff; -; -; while(argLen--) -; crc = table(lo8(crc) ^ *argPtr++) ^ hi8(crc); -; return ~crc; -; } - -; extern unsigned usbCrc16(unsigned char *argPtr, unsigned char argLen); -; argPtr r24+25 / r16+r17 -; argLen r22 / r18 -; temp variables: -; byte r18 / r22 -; scratch r23 -; resCrc r24+r25 / r16+r17 -; ptr X / Z -usbCrc16: - mov ptrL, argPtrL - mov ptrH, argPtrH - ldi resCrcL, 0xFF - ldi resCrcH, 0xFF - rjmp usbCrc16LoopTest -usbCrc16ByteLoop: - ld byte, ptr+ - eor resCrcL, byte ; resCrcL is now 'x' in table() - mov byte, resCrcL ; compute parity of 'x' - swap byte - eor byte, resCrcL - mov scratch, byte - lsr byte - lsr byte - eor byte, scratch - inc byte - lsr byte - andi byte, 1 ; byte is now parity(x) - mov scratch, resCrcL - mov resCrcL, resCrcH - eor resCrcL, byte ; low byte of if(parity(x)) value ^= 0xc001; - neg byte - andi byte, 0xc0 - mov resCrcH, byte ; high byte of if(parity(x)) value ^= 0xc001; - clr byte - lsr scratch - ror byte - eor resCrcH, scratch - eor resCrcL, byte - lsr scratch - ror byte - eor resCrcH, scratch - eor resCrcL, byte -usbCrc16LoopTest: - subi argLen, 1 - brsh usbCrc16ByteLoop - com resCrcL - com resCrcH - ret - -#else /* USB_USE_FAST_CRC */ - -; This implementation is slower, but has less code size -; -; extern unsigned usbCrc16(unsigned char *argPtr, unsigned char argLen); -; argPtr r24+25 / r16+r17 -; argLen r22 / r18 -; temp variables: -; byte r18 / r22 -; bitCnt r19 -; poly r20+r21 -; scratch r23 -; resCrc r24+r25 / r16+r17 -; ptr X / Z -usbCrc16: - mov ptrL, argPtrL - mov ptrH, argPtrH - ldi resCrcL, 0 - ldi resCrcH, 0 - ldi polyL, lo8(0xa001) - ldi polyH, hi8(0xa001) - com argLen ; argLen = -argLen - 1: modified loop to ensure that carry is set - ldi bitCnt, 0 ; loop counter with starnd condition = end condition - rjmp usbCrcLoopEntry -usbCrcByteLoop: - ld byte, ptr+ - eor resCrcL, byte -usbCrcBitLoop: - ror resCrcH ; carry is always set here (see brcs jumps to here) - ror resCrcL - brcs usbCrcNoXor - eor resCrcL, polyL - eor resCrcH, polyH -usbCrcNoXor: - subi bitCnt, 224 ; (8 * 224) % 256 = 0; this loop iterates 8 times - brcs usbCrcBitLoop -usbCrcLoopEntry: - subi argLen, -1 - brcs usbCrcByteLoop -usbCrcReady: - ret -; Thanks to Reimar Doeffinger for optimizing this CRC routine! - -#endif /* USB_USE_FAST_CRC */ - -; extern unsigned usbCrc16Append(unsigned char *data, unsigned char len); -usbCrc16Append: - rcall usbCrc16 - st ptr+, resCrcL - st ptr+, resCrcH - ret - -#undef argLen -#undef argPtrL -#undef argPtrH -#undef resCrcL -#undef resCrcH -#undef ptrL -#undef ptrH -#undef ptr -#undef byte -#undef bitCnt -#undef polyL -#undef polyH -#undef scratch - - -#if USB_CFG_HAVE_MEASURE_FRAME_LENGTH -#ifdef __IAR_SYSTEMS_ASM__ -/* Register assignments for usbMeasureFrameLength on IAR cc */ -/* Calling conventions on IAR: - * First parameter passed in r16/r17, second in r18/r19 and so on. - * Callee must preserve r4-r15, r24-r29 (r28/r29 is frame pointer) - * Result is passed in r16/r17 - * In case of the "tiny" memory model, pointers are only 8 bit with no - * padding. We therefore pass argument 1 as "16 bit unsigned". - */ -# define resL r16 -# define resH r17 -# define cnt16L r30 -# define cnt16H r31 -# define cntH r18 - -#else /* __IAR_SYSTEMS_ASM__ */ -/* Register assignments for usbMeasureFrameLength on gcc */ -/* Calling conventions on gcc: - * First parameter passed in r24/r25, second in r22/23 and so on. - * Callee must preserve r1-r17, r28/r29 - * Result is passed in r24/r25 - */ -# define resL r24 -# define resH r25 -# define cnt16L r24 -# define cnt16H r25 -# define cntH r26 -#endif -# define cnt16 cnt16L - -; extern unsigned usbMeasurePacketLength(void); -; returns time between two idle strobes in multiples of 7 CPU clocks -.global usbMeasureFrameLength -usbMeasureFrameLength: - ldi cntH, 6 ; wait ~ 10 ms for D- == 0 - clr cnt16L - clr cnt16H -usbMFTime16: - dec cntH - breq usbMFTimeout -usbMFWaitStrobe: ; first wait for D- == 0 (idle strobe) - sbiw cnt16, 1 ;[0] [6] - breq usbMFTime16 ;[2] - sbic USBIN, USBMINUS ;[3] - rjmp usbMFWaitStrobe ;[4] -usbMFWaitIdle: ; then wait until idle again - sbis USBIN, USBMINUS ;1 wait for D- == 1 - rjmp usbMFWaitIdle ;2 - ldi cnt16L, 1 ;1 represents cycles so far - clr cnt16H ;1 -usbMFWaitLoop: - in cntH, USBIN ;[0] [7] - adiw cnt16, 1 ;[1] - breq usbMFTimeout ;[3] - andi cntH, USBMASK ;[4] - brne usbMFWaitLoop ;[5] -usbMFTimeout: -#if resL != cnt16L - mov resL, cnt16L - mov resH, cnt16H -#endif - ret - -#undef resL -#undef resH -#undef cnt16 -#undef cnt16L -#undef cnt16H -#undef cntH - -#endif /* USB_CFG_HAVE_MEASURE_FRAME_LENGTH */ - -;---------------------------------------------------------------------------- -; Now include the clock rate specific code -;---------------------------------------------------------------------------- - -#ifndef USB_CFG_CLOCK_KHZ -# ifdef F_CPU -# define USB_CFG_CLOCK_KHZ (F_CPU/1000) -# else -# error "USB_CFG_CLOCK_KHZ not defined in usbconfig.h and no F_CPU set!" -# endif -#endif - -#if USB_CFG_CHECK_CRC /* separate dispatcher for CRC type modules */ -# if USB_CFG_CLOCK_KHZ == 18000 -# include "usbdrvasm18-crc.inc" -# else -# error "USB_CFG_CLOCK_KHZ is not one of the supported crc-rates!" -# endif -#else /* USB_CFG_CHECK_CRC */ -# if USB_CFG_CLOCK_KHZ == 12000 -# include "usbdrvasm12.inc" -# elif USB_CFG_CLOCK_KHZ == 12800 -# include "usbdrvasm128.inc" -# elif USB_CFG_CLOCK_KHZ == 15000 -# include "usbdrvasm15.inc" -# elif USB_CFG_CLOCK_KHZ == 16000 -# include "usbdrvasm16.inc" -# elif USB_CFG_CLOCK_KHZ == 16500 -# include "usbdrvasm165.inc" -# elif USB_CFG_CLOCK_KHZ == 20000 -# include "usbdrvasm20.inc" -# else -# error "USB_CFG_CLOCK_KHZ is not one of the supported non-crc-rates!" -# endif -#endif /* USB_CFG_CHECK_CRC */ diff --git a/tmk_core/protocol/vusb/usbdrv/usbdrvasm.asm b/tmk_core/protocol/vusb/usbdrv/usbdrvasm.asm deleted file mode 100644 index 9cc4e4d739..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/usbdrvasm.asm +++ /dev/null @@ -1,21 +0,0 @@ -/* Name: usbdrvasm.asm - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2006-03-01 - * Tabsize: 4 - * Copyright: (c) 2006 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id$ - */ - -/* -General Description: -The IAR compiler/assembler system prefers assembler files with file extension -".asm". We simply provide this file as an alias for usbdrvasm.S. - -Thanks to Oleg Semyonov for his help with the IAR tools port! -*/ - -#include "usbdrvasm.S" - -end diff --git a/tmk_core/protocol/vusb/usbdrv/usbdrvasm12.inc b/tmk_core/protocol/vusb/usbdrv/usbdrvasm12.inc deleted file mode 100644 index c1167584cb..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/usbdrvasm12.inc +++ /dev/null @@ -1,393 +0,0 @@ -/* Name: usbdrvasm12.inc - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2004-12-29 - * Tabsize: 4 - * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: usbdrvasm12.inc 740 2009-04-13 18:23:31Z cs $ - */ - -/* Do not link this file! Link usbdrvasm.S instead, which includes the - * appropriate implementation! - */ - -/* -General Description: -This file is the 12 MHz version of the asssembler part of the USB driver. It -requires a 12 MHz crystal (not a ceramic resonator and not a calibrated RC -oscillator). - -See usbdrv.h for a description of the entire driver. - -Since almost all of this code is timing critical, don't change unless you -really know what you are doing! Many parts require not only a maximum number -of CPU cycles, but even an exact number of cycles! - - -Timing constraints according to spec (in bit times): -timing subject min max CPUcycles ---------------------------------------------------------------------------- -EOP of OUT/SETUP to sync pattern of DATA0 (both rx) 2 16 16-128 -EOP of IN to sync pattern of DATA0 (rx, then tx) 2 7.5 16-60 -DATAx (rx) to ACK/NAK/STALL (tx) 2 7.5 16-60 -*/ - -;Software-receiver engine. Strict timing! Don't change unless you can preserve timing! -;interrupt response time: 4 cycles + insn running = 7 max if interrupts always enabled -;max allowable interrupt latency: 34 cycles -> max 25 cycles interrupt disable -;max stack usage: [ret(2), YL, SREG, YH, shift, x1, x2, x3, cnt, x4] = 11 bytes -;Numbers in brackets are maximum cycles since SOF. -USB_INTR_VECTOR: -;order of registers pushed: YL, SREG [sofError], YH, shift, x1, x2, x3, cnt - push YL ;2 [35] push only what is necessary to sync with edge ASAP - in YL, SREG ;1 [37] - push YL ;2 [39] -;---------------------------------------------------------------------------- -; Synchronize with sync pattern: -;---------------------------------------------------------------------------- -;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K] -;sync up with J to K edge during sync pattern -- use fastest possible loops -;The first part waits at most 1 bit long since we must be in sync pattern. -;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to -;waitForJ, ensure that this prerequisite is met. -waitForJ: - inc YL - sbis USBIN, USBMINUS - brne waitForJ ; just make sure we have ANY timeout -waitForK: -;The following code results in a sampling window of 1/4 bit which meets the spec. - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK -#if USB_COUNT_SOF - lds YL, usbSofCount - inc YL - sts usbSofCount, YL -#endif /* USB_COUNT_SOF */ -#ifdef USB_SOF_HOOK - USB_SOF_HOOK -#endif - rjmp sofError -foundK: -;{3, 5} after falling D- edge, average delay: 4 cycles [we want 4 for center sampling] -;we have 1 bit time for setup purposes, then sample again. Numbers in brackets -;are cycles from center of first sync (double K) bit after the instruction - push YH ;2 [2] - lds YL, usbInputBufOffset;2 [4] - clr YH ;1 [5] - subi YL, lo8(-(usbRxBuf));1 [6] - sbci YH, hi8(-(usbRxBuf));1 [7] - - sbis USBIN, USBMINUS ;1 [8] we want two bits K [sample 1 cycle too early] - rjmp haveTwoBitsK ;2 [10] - pop YH ;2 [11] undo the push from before - rjmp waitForK ;2 [13] this was not the end of sync, retry -haveTwoBitsK: -;---------------------------------------------------------------------------- -; push more registers and initialize values while we sample the first bits: -;---------------------------------------------------------------------------- - push shift ;2 [16] - push x1 ;2 [12] - push x2 ;2 [14] - - in x1, USBIN ;1 [17] <-- sample bit 0 - ldi shift, 0xff ;1 [18] - bst x1, USBMINUS ;1 [19] - bld shift, 0 ;1 [20] - push x3 ;2 [22] - push cnt ;2 [24] - - in x2, USBIN ;1 [25] <-- sample bit 1 - ser x3 ;1 [26] [inserted init instruction] - eor x1, x2 ;1 [27] - bst x1, USBMINUS ;1 [28] - bld shift, 1 ;1 [29] - ldi cnt, USB_BUFSIZE;1 [30] [inserted init instruction] - rjmp rxbit2 ;2 [32] - -;---------------------------------------------------------------------------- -; Receiver loop (numbers in brackets are cycles within byte after instr) -;---------------------------------------------------------------------------- - -unstuff0: ;1 (branch taken) - andi x3, ~0x01 ;1 [15] - mov x1, x2 ;1 [16] x2 contains last sampled (stuffed) bit - in x2, USBIN ;1 [17] <-- sample bit 1 again - ori shift, 0x01 ;1 [18] - rjmp didUnstuff0 ;2 [20] - -unstuff1: ;1 (branch taken) - mov x2, x1 ;1 [21] x1 contains last sampled (stuffed) bit - andi x3, ~0x02 ;1 [22] - ori shift, 0x02 ;1 [23] - nop ;1 [24] - in x1, USBIN ;1 [25] <-- sample bit 2 again - rjmp didUnstuff1 ;2 [27] - -unstuff2: ;1 (branch taken) - andi x3, ~0x04 ;1 [29] - ori shift, 0x04 ;1 [30] - mov x1, x2 ;1 [31] x2 contains last sampled (stuffed) bit - nop ;1 [32] - in x2, USBIN ;1 [33] <-- sample bit 3 - rjmp didUnstuff2 ;2 [35] - -unstuff3: ;1 (branch taken) - in x2, USBIN ;1 [34] <-- sample stuffed bit 3 [one cycle too late] - andi x3, ~0x08 ;1 [35] - ori shift, 0x08 ;1 [36] - rjmp didUnstuff3 ;2 [38] - -unstuff4: ;1 (branch taken) - andi x3, ~0x10 ;1 [40] - in x1, USBIN ;1 [41] <-- sample stuffed bit 4 - ori shift, 0x10 ;1 [42] - rjmp didUnstuff4 ;2 [44] - -unstuff5: ;1 (branch taken) - andi x3, ~0x20 ;1 [48] - in x2, USBIN ;1 [49] <-- sample stuffed bit 5 - ori shift, 0x20 ;1 [50] - rjmp didUnstuff5 ;2 [52] - -unstuff6: ;1 (branch taken) - andi x3, ~0x40 ;1 [56] - in x1, USBIN ;1 [57] <-- sample stuffed bit 6 - ori shift, 0x40 ;1 [58] - rjmp didUnstuff6 ;2 [60] - -; extra jobs done during bit interval: -; bit 0: store, clear [SE0 is unreliable here due to bit dribbling in hubs] -; bit 1: se0 check -; bit 2: overflow check -; bit 3: recovery from delay [bit 0 tasks took too long] -; bit 4: none -; bit 5: none -; bit 6: none -; bit 7: jump, eor -rxLoop: - eor x3, shift ;1 [0] reconstruct: x3 is 0 at bit locations we changed, 1 at others - in x1, USBIN ;1 [1] <-- sample bit 0 - st y+, x3 ;2 [3] store data - ser x3 ;1 [4] - nop ;1 [5] - eor x2, x1 ;1 [6] - bst x2, USBMINUS;1 [7] - bld shift, 0 ;1 [8] - in x2, USBIN ;1 [9] <-- sample bit 1 (or possibly bit 0 stuffed) - andi x2, USBMASK ;1 [10] - breq se0 ;1 [11] SE0 check for bit 1 - andi shift, 0xf9 ;1 [12] -didUnstuff0: - breq unstuff0 ;1 [13] - eor x1, x2 ;1 [14] - bst x1, USBMINUS;1 [15] - bld shift, 1 ;1 [16] -rxbit2: - in x1, USBIN ;1 [17] <-- sample bit 2 (or possibly bit 1 stuffed) - andi shift, 0xf3 ;1 [18] - breq unstuff1 ;1 [19] do remaining work for bit 1 -didUnstuff1: - subi cnt, 1 ;1 [20] - brcs overflow ;1 [21] loop control - eor x2, x1 ;1 [22] - bst x2, USBMINUS;1 [23] - bld shift, 2 ;1 [24] - in x2, USBIN ;1 [25] <-- sample bit 3 (or possibly bit 2 stuffed) - andi shift, 0xe7 ;1 [26] - breq unstuff2 ;1 [27] -didUnstuff2: - eor x1, x2 ;1 [28] - bst x1, USBMINUS;1 [29] - bld shift, 3 ;1 [30] -didUnstuff3: - andi shift, 0xcf ;1 [31] - breq unstuff3 ;1 [32] - in x1, USBIN ;1 [33] <-- sample bit 4 - eor x2, x1 ;1 [34] - bst x2, USBMINUS;1 [35] - bld shift, 4 ;1 [36] -didUnstuff4: - andi shift, 0x9f ;1 [37] - breq unstuff4 ;1 [38] - nop2 ;2 [40] - in x2, USBIN ;1 [41] <-- sample bit 5 - eor x1, x2 ;1 [42] - bst x1, USBMINUS;1 [43] - bld shift, 5 ;1 [44] -didUnstuff5: - andi shift, 0x3f ;1 [45] - breq unstuff5 ;1 [46] - nop2 ;2 [48] - in x1, USBIN ;1 [49] <-- sample bit 6 - eor x2, x1 ;1 [50] - bst x2, USBMINUS;1 [51] - bld shift, 6 ;1 [52] -didUnstuff6: - cpi shift, 0x02 ;1 [53] - brlo unstuff6 ;1 [54] - nop2 ;2 [56] - in x2, USBIN ;1 [57] <-- sample bit 7 - eor x1, x2 ;1 [58] - bst x1, USBMINUS;1 [59] - bld shift, 7 ;1 [60] -didUnstuff7: - cpi shift, 0x04 ;1 [61] - brsh rxLoop ;2 [63] loop control -unstuff7: - andi x3, ~0x80 ;1 [63] - ori shift, 0x80 ;1 [64] - in x2, USBIN ;1 [65] <-- sample stuffed bit 7 - nop ;1 [66] - rjmp didUnstuff7 ;2 [68] - -macro POP_STANDARD ; 12 cycles - pop cnt - pop x3 - pop x2 - pop x1 - pop shift - pop YH - endm -macro POP_RETI ; 5 cycles - pop YL - out SREG, YL - pop YL - endm - -#include "asmcommon.inc" - -;---------------------------------------------------------------------------- -; Transmitting data -;---------------------------------------------------------------------------- - -txByteLoop: -txBitloop: -stuffN1Delay: ; [03] - ror shift ;[-5] [11] [59] - brcc doExorN1 ;[-4] [60] - subi x4, 1 ;[-3] - brne commonN1 ;[-2] - lsl shift ;[-1] compensate ror after rjmp stuffDelay - nop ;[00] stuffing consists of just waiting 8 cycles - rjmp stuffN1Delay ;[01] after ror, C bit is reliably clear - -sendNakAndReti: ;0 [-19] 19 cycles until SOP - ldi x3, USBPID_NAK ;1 [-18] - rjmp usbSendX3 ;2 [-16] -sendAckAndReti: ;0 [-19] 19 cycles until SOP - ldi x3, USBPID_ACK ;1 [-18] - rjmp usbSendX3 ;2 [-16] -sendCntAndReti: ;0 [-17] 17 cycles until SOP - mov x3, cnt ;1 [-16] -usbSendX3: ;0 [-16] - ldi YL, 20 ;1 [-15] 'x3' is R20 - ldi YH, 0 ;1 [-14] - ldi cnt, 2 ;1 [-13] -; rjmp usbSendAndReti fallthrough - -; USB spec says: -; idle = J -; J = (D+ = 0), (D- = 1) or USBOUT = 0x01 -; K = (D+ = 1), (D- = 0) or USBOUT = 0x02 -; Spec allows 7.5 bit times from EOP to SOP for replies (= 60 cycles) - -;usbSend: -;pointer to data in 'Y' -;number of bytes in 'cnt' -- including sync byte -;uses: x1...x2, x4, shift, cnt, Y [x1 = mirror USBOUT, x2 = USBMASK, x4 = bitstuff cnt] -;Numbers in brackets are time since first bit of sync pattern is sent (start of instruction) -usbSendAndReti: - in x2, USBDDR ;[-12] 12 cycles until SOP - ori x2, USBMASK ;[-11] - sbi USBOUT, USBMINUS ;[-10] prepare idle state; D+ and D- must have been 0 (no pullups) - out USBDDR, x2 ;[-8] <--- acquire bus - in x1, USBOUT ;[-7] port mirror for tx loop - ldi shift, 0x40 ;[-6] sync byte is first byte sent (we enter loop after ror) - ldi x2, USBMASK ;[-5] - push x4 ;[-4] -doExorN1: - eor x1, x2 ;[-2] [06] [62] - ldi x4, 6 ;[-1] [07] [63] -commonN1: -stuffN2Delay: - out USBOUT, x1 ;[00] [08] [64] <--- set bit - ror shift ;[01] - brcc doExorN2 ;[02] - subi x4, 1 ;[03] - brne commonN2 ;[04] - lsl shift ;[05] compensate ror after rjmp stuffDelay - rjmp stuffN2Delay ;[06] after ror, C bit is reliably clear -doExorN2: - eor x1, x2 ;[04] [12] - ldi x4, 6 ;[05] [13] -commonN2: - nop ;[06] [14] - subi cnt, 171 ;[07] [15] trick: (3 * 171) & 0xff = 1 - out USBOUT, x1 ;[08] [16] <--- set bit - brcs txBitloop ;[09] [25] [41] - -stuff6Delay: - ror shift ;[42] [50] - brcc doExor6 ;[43] - subi x4, 1 ;[44] - brne common6 ;[45] - lsl shift ;[46] compensate ror after rjmp stuffDelay - nop ;[47] stuffing consists of just waiting 8 cycles - rjmp stuff6Delay ;[48] after ror, C bit is reliably clear -doExor6: - eor x1, x2 ;[45] [53] - ldi x4, 6 ;[46] -common6: -stuff7Delay: - ror shift ;[47] [55] - out USBOUT, x1 ;[48] <--- set bit - brcc doExor7 ;[49] - subi x4, 1 ;[50] - brne common7 ;[51] - lsl shift ;[52] compensate ror after rjmp stuffDelay - rjmp stuff7Delay ;[53] after ror, C bit is reliably clear -doExor7: - eor x1, x2 ;[51] [59] - ldi x4, 6 ;[52] -common7: - ld shift, y+ ;[53] - tst cnt ;[55] - out USBOUT, x1 ;[56] <--- set bit - brne txByteLoop ;[57] - -;make SE0: - cbr x1, USBMASK ;[58] prepare SE0 [spec says EOP may be 15 to 18 cycles] - lds x2, usbNewDeviceAddr;[59] - lsl x2 ;[61] we compare with left shifted address - subi YL, 2 + 20 ;[62] Only assign address on data packets, not ACK/NAK in x3 - sbci YH, 0 ;[63] - out USBOUT, x1 ;[00] <-- out SE0 -- from now 2 bits = 16 cycles until bus idle -;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm: -;set address only after data packet was sent, not after handshake - breq skipAddrAssign ;[01] - sts usbDeviceAddr, x2 ; if not skipped: SE0 is one cycle longer -skipAddrAssign: -;end of usbDeviceAddress transfer - ldi x2, 1<<USB_INTR_PENDING_BIT;[03] int0 occurred during TX -- clear pending flag - USB_STORE_PENDING(x2) ;[04] - ori x1, USBIDLE ;[05] - in x2, USBDDR ;[06] - cbr x2, USBMASK ;[07] set both pins to input - mov x3, x1 ;[08] - cbr x3, USBMASK ;[09] configure no pullup on both pins - pop x4 ;[10] - nop2 ;[12] - nop2 ;[14] - out USBOUT, x1 ;[16] <-- out J (idle) -- end of SE0 (EOP signal) - out USBDDR, x2 ;[17] <-- release bus now - out USBOUT, x3 ;[18] <-- ensure no pull-up resistors are active - rjmp doReturn diff --git a/tmk_core/protocol/vusb/usbdrv/usbdrvasm128.inc b/tmk_core/protocol/vusb/usbdrv/usbdrvasm128.inc deleted file mode 100644 index bcd6621cc2..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/usbdrvasm128.inc +++ /dev/null @@ -1,750 +0,0 @@ -/* Name: usbdrvasm128.inc - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2008-10-11 - * Tabsize: 4 - * Copyright: (c) 2008 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: usbdrvasm128.inc 758 2009-08-06 10:12:54Z cs $ - */ - -/* Do not link this file! Link usbdrvasm.S instead, which includes the - * appropriate implementation! - */ - -/* -General Description: -This file is the 12.8 MHz version of the USB driver. It is intended for use -with the internal RC oscillator. Although 12.8 MHz is outside the guaranteed -calibration range of the oscillator, almost all AVRs can reach this frequency. -This version contains a phase locked loop in the receiver routine to cope with -slight clock rate deviations of up to +/- 1%. - -See usbdrv.h for a description of the entire driver. - -LIMITATIONS -=========== -Although it may seem very handy to save the crystal and use the internal -RC oscillator of the CPU, this method (and this module) has some serious -limitations: -(1) The guaranteed calibration range of the oscillator is only 8.1 MHz. -They typical range is 14.5 MHz and most AVRs can actually reach this rate. -(2) Writing EEPROM and Flash may be unreliable (short data lifetime) since -the write procedure is timed from the RC oscillator. -(3) End Of Packet detection (SE0) should be in bit 1, bit it is only checked -if bits 0 and 1 both read as 0 on D- and D+ read as 0 in the middle. This may -cause problems with old hubs which delay SE0 by up to one cycle. -(4) Code size is much larger than that of the other modules. - -Since almost all of this code is timing critical, don't change unless you -really know what you are doing! Many parts require not only a maximum number -of CPU cycles, but even an exact number of cycles! - -Implementation notes: -====================== -min frequency: 67 cycles for 8 bit -> 12.5625 MHz -max frequency: 69.286 cycles for 8 bit -> 12.99 MHz -nominal frequency: 12.77 MHz ( = sqrt(min * max)) - -sampling positions: (next even number in range [+/- 0.5]) -cycle index range: 0 ... 66 -bits: -.5, 8.875, 17.25, 25.625, 34, 42.375, 50.75, 59.125 -[0/1], [9], [17], [25/+26], [34], [+42/43], [51], [59] - -bit number: 0 1 2 3 4 5 6 7 -spare cycles 1 2 1 2 1 1 1 0 - -operations to perform: duration cycle - ---------------- - eor fix, shift 1 -> 00 - andi phase, USBMASK 1 -> 08 - breq se0 1 -> 16 (moved to 11) - st y+, data 2 -> 24, 25 - mov data, fix 1 -> 33 - ser data 1 -> 41 - subi cnt, 1 1 -> 49 - brcs overflow 1 -> 50 - -layout of samples and operations: -[##] = sample bit -<##> = sample phase -*##* = operation - -0: *00* [01] 02 03 04 <05> 06 07 -1: *08* [09] 10 11 12 <13> 14 15 *16* -2: [17] 18 19 20 <21> 22 23 -3: *24* *25* [26] 27 28 29 <30> 31 32 -4: *33* [34] 35 36 37 <38> 39 40 -5: *41* [42] 43 44 45 <46> 47 48 -6: *49* *50* [51] 52 53 54 <55> 56 57 58 -7: [59] 60 61 62 <63> 64 65 66 -*****************************************************************************/ - -/* we prefer positive expressions (do if condition) instead of negative - * (skip if condition), therefore use defines for skip instructions: - */ -#define ifioclr sbis -#define ifioset sbic -#define ifrclr sbrs -#define ifrset sbrc - -/* The registers "fix" and "data" swap their meaning during the loop. Use - * defines to keep their name constant. - */ -#define fix x2 -#define data x1 -#undef phase /* phase has a default definition to x4 */ -#define phase x3 - - -USB_INTR_VECTOR: -;order of registers pushed: YL, SREG [sofError], YH, shift, x1, x2, x3, cnt, r0 - push YL ;2 push only what is necessary to sync with edge ASAP - in YL, SREG ;1 - push YL ;2 -;---------------------------------------------------------------------------- -; Synchronize with sync pattern: -;---------------------------------------------------------------------------- -;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K] -;sync up with J to K edge during sync pattern -- use fastest possible loops -;The first part waits at most 1 bit long since we must be in sync pattern. -;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to -;waitForJ, ensure that this prerequisite is met. -waitForJ: - inc YL - sbis USBIN, USBMINUS - brne waitForJ ; just make sure we have ANY timeout -waitForK: -;The following code results in a sampling window of 1/4 bit which meets the spec. - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS ;[0] - rjmp foundK ;[1] -#if USB_COUNT_SOF - lds YL, usbSofCount - inc YL - sts usbSofCount, YL -#endif /* USB_COUNT_SOF */ -#ifdef USB_SOF_HOOK - USB_SOF_HOOK -#endif - rjmp sofError - -foundK: -;{3, 5} after falling D- edge, average delay: 4 cycles [we want 4 for center sampling] -;we have 1 bit time for setup purposes, then sample again. Numbers in brackets -;are cycles from center of first sync (double K) bit after the instruction - push YH ;[2] - lds YL, usbInputBufOffset;[4] - clr YH ;[6] - subi YL, lo8(-(usbRxBuf));[7] - sbci YH, hi8(-(usbRxBuf));[8] - - sbis USBIN, USBMINUS ;[9] we want two bits K [we want to sample at 8 + 4 - 1.5 = 10.5] - rjmp haveTwoBitsK ;[10] - pop YH ;[11] undo the push from before - rjmp waitForK ;[13] this was not the end of sync, retry -haveTwoBitsK: -;---------------------------------------------------------------------------- -; push more registers and initialize values while we sample the first bits: -;---------------------------------------------------------------------------- -#define fix x2 -#define data x1 - - push shift ;[12] - push x1 ;[14] - push x2 ;[16] - ldi shift, 0x80 ;[18] prevent bit-unstuffing but init low bits to 0 - ifioset USBIN, USBMINUS ;[19] [01] <--- bit 0 [10.5 + 8 = 18.5] - ori shift, 1<<0 ;[02] - push x3 ;[03] - push cnt ;[05] - push r0 ;[07] - ifioset USBIN, USBMINUS ;[09] <--- bit 1 - ori shift, 1<<1 ;[10] - ser fix ;[11] - ldi cnt, USB_BUFSIZE ;[12] - mov data, shift ;[13] - lsl shift ;[14] - nop2 ;[15] - ifioset USBIN, USBMINUS ;[17] <--- bit 2 - ori data, 3<<2 ;[18] store in bit 2 AND bit 3 - eor shift, data ;[19] do nrzi decoding - andi data, 1<<3 ;[20] - in phase, USBIN ;[21] <- phase - brne jumpToEntryAfterSet ;[22] if USBMINS at bit 3 was 1 - nop ;[23] - rjmp entryAfterClr ;[24] -jumpToEntryAfterSet: - rjmp entryAfterSet ;[24] - -;---------------------------------------------------------------------------- -; Receiver loop (numbers in brackets are cycles within byte after instr) -;---------------------------------------------------------------------------- -#undef fix -#define fix x1 -#undef data -#define data x2 - -bit7IsSet: - ifrclr phase, USBMINUS ;[62] check phase only if D- changed - lpm ;[63] - in phase, USBIN ;[64] <- phase (one cycle too late) - ori shift, 1 << 7 ;[65] - nop ;[66] -;;;;rjmp bit0AfterSet ; -> [00] == [67] moved block up to save jump -bit0AfterSet: - eor fix, shift ;[00] -#undef fix -#define fix x2 -#undef data -#define data x1 /* we now have result in data, fix is reset to 0xff */ - ifioclr USBIN, USBMINUS ;[01] <--- sample 0 - rjmp bit0IsClr ;[02] - andi shift, ~(7 << 0) ;[03] - breq unstuff0s ;[04] - in phase, USBIN ;[05] <- phase - rjmp bit1AfterSet ;[06] -unstuff0s: - in phase, USBIN ;[06] <- phase (one cycle too late) - andi fix, ~(1 << 0) ;[07] - ifioclr USBIN, USBMINUS ;[00] - ifioset USBIN, USBPLUS ;[01] - rjmp bit0IsClr ;[02] executed if first expr false or second true -se0AndStore: ; executed only if both bits 0 - st y+, x1 ;[15/17] cycles after start of byte - rjmp se0 ;[17/19] - -bit0IsClr: - ifrset phase, USBMINUS ;[04] check phase only if D- changed - lpm ;[05] - in phase, USBIN ;[06] <- phase (one cycle too late) - ori shift, 1 << 0 ;[07] -bit1AfterClr: - andi phase, USBMASK ;[08] - ifioset USBIN, USBMINUS ;[09] <--- sample 1 - rjmp bit1IsSet ;[10] - breq se0AndStore ;[11] if D- was 0 in bits 0 AND 1 and D+ was 0 in between, we have SE0 - andi shift, ~(7 << 1) ;[12] - in phase, USBIN ;[13] <- phase - breq unstuff1c ;[14] - rjmp bit2AfterClr ;[15] -unstuff1c: - andi fix, ~(1 << 1) ;[16] - nop2 ;[08] - nop2 ;[10] -bit1IsSet: - ifrclr phase, USBMINUS ;[12] check phase only if D- changed - lpm ;[13] - in phase, USBIN ;[14] <- phase (one cycle too late) - ori shift, 1 << 1 ;[15] - nop ;[16] -bit2AfterSet: - ifioclr USBIN, USBMINUS ;[17] <--- sample 2 - rjmp bit2IsClr ;[18] - andi shift, ~(7 << 2) ;[19] - breq unstuff2s ;[20] - in phase, USBIN ;[21] <- phase - rjmp bit3AfterSet ;[22] -unstuff2s: - in phase, USBIN ;[22] <- phase (one cycle too late) - andi fix, ~(1 << 2) ;[23] - nop2 ;[16] - nop2 ;[18] -bit2IsClr: - ifrset phase, USBMINUS ;[20] check phase only if D- changed - lpm ;[21] - in phase, USBIN ;[22] <- phase (one cycle too late) - ori shift, 1 << 2 ;[23] -bit3AfterClr: - st y+, data ;[24] -entryAfterClr: - ifioset USBIN, USBMINUS ;[26] <--- sample 3 - rjmp bit3IsSet ;[27] - andi shift, ~(7 << 3) ;[28] - breq unstuff3c ;[29] - in phase, USBIN ;[30] <- phase - rjmp bit4AfterClr ;[31] -unstuff3c: - in phase, USBIN ;[31] <- phase (one cycle too late) - andi fix, ~(1 << 3) ;[32] - nop2 ;[25] - nop2 ;[27] -bit3IsSet: - ifrclr phase, USBMINUS ;[29] check phase only if D- changed - lpm ;[30] - in phase, USBIN ;[31] <- phase (one cycle too late) - ori shift, 1 << 3 ;[32] -bit4AfterSet: - mov data, fix ;[33] undo this move by swapping defines -#undef fix -#define fix x1 -#undef data -#define data x2 - ifioclr USBIN, USBMINUS ;[34] <--- sample 4 - rjmp bit4IsClr ;[35] - andi shift, ~(7 << 4) ;[36] - breq unstuff4s ;[37] - in phase, USBIN ;[38] <- phase - rjmp bit5AfterSet ;[39] -unstuff4s: - in phase, USBIN ;[39] <- phase (one cycle too late) - andi fix, ~(1 << 4) ;[40] - nop2 ;[33] - nop2 ;[35] -bit4IsClr: - ifrset phase, USBMINUS ;[37] check phase only if D- changed - lpm ;[38] - in phase, USBIN ;[39] <- phase (one cycle too late) - ori shift, 1 << 4 ;[40] -bit5AfterClr: - ser data ;[41] - ifioset USBIN, USBMINUS ;[42] <--- sample 5 - rjmp bit5IsSet ;[43] - andi shift, ~(7 << 5) ;[44] - breq unstuff5c ;[45] - in phase, USBIN ;[46] <- phase - rjmp bit6AfterClr ;[47] -unstuff5c: - in phase, USBIN ;[47] <- phase (one cycle too late) - andi fix, ~(1 << 5) ;[48] - nop2 ;[41] - nop2 ;[43] -bit5IsSet: - ifrclr phase, USBMINUS ;[45] check phase only if D- changed - lpm ;[46] - in phase, USBIN ;[47] <- phase (one cycle too late) - ori shift, 1 << 5 ;[48] -bit6AfterSet: - subi cnt, 1 ;[49] - brcs jumpToOverflow ;[50] - ifioclr USBIN, USBMINUS ;[51] <--- sample 6 - rjmp bit6IsClr ;[52] - andi shift, ~(3 << 6) ;[53] - cpi shift, 2 ;[54] - in phase, USBIN ;[55] <- phase - brlt unstuff6s ;[56] - rjmp bit7AfterSet ;[57] - -jumpToOverflow: - rjmp overflow - -unstuff6s: - andi fix, ~(1 << 6) ;[50] - lpm ;[51] -bit6IsClr: - ifrset phase, USBMINUS ;[54] check phase only if D- changed - lpm ;[55] - in phase, USBIN ;[56] <- phase (one cycle too late) - ori shift, 1 << 6 ;[57] - nop ;[58] -bit7AfterClr: - ifioset USBIN, USBMINUS ;[59] <--- sample 7 - rjmp bit7IsSet ;[60] - andi shift, ~(1 << 7) ;[61] - cpi shift, 4 ;[62] - in phase, USBIN ;[63] <- phase - brlt unstuff7c ;[64] - rjmp bit0AfterClr ;[65] -> [00] == [67] -unstuff7c: - andi fix, ~(1 << 7) ;[58] - nop ;[59] - rjmp bit7IsSet ;[60] - -bit7IsClr: - ifrset phase, USBMINUS ;[62] check phase only if D- changed - lpm ;[63] - in phase, USBIN ;[64] <- phase (one cycle too late) - ori shift, 1 << 7 ;[65] - nop ;[66] -;;;;rjmp bit0AfterClr ; -> [00] == [67] moved block up to save jump -bit0AfterClr: - eor fix, shift ;[00] -#undef fix -#define fix x2 -#undef data -#define data x1 /* we now have result in data, fix is reset to 0xff */ - ifioset USBIN, USBMINUS ;[01] <--- sample 0 - rjmp bit0IsSet ;[02] - andi shift, ~(7 << 0) ;[03] - breq unstuff0c ;[04] - in phase, USBIN ;[05] <- phase - rjmp bit1AfterClr ;[06] -unstuff0c: - in phase, USBIN ;[06] <- phase (one cycle too late) - andi fix, ~(1 << 0) ;[07] - ifioclr USBIN, USBMINUS ;[00] - ifioset USBIN, USBPLUS ;[01] - rjmp bit0IsSet ;[02] executed if first expr false or second true - rjmp se0AndStore ;[03] executed only if both bits 0 -bit0IsSet: - ifrclr phase, USBMINUS ;[04] check phase only if D- changed - lpm ;[05] - in phase, USBIN ;[06] <- phase (one cycle too late) - ori shift, 1 << 0 ;[07] -bit1AfterSet: - andi shift, ~(7 << 1) ;[08] compensated by "ori shift, 1<<1" if bit1IsClr - ifioclr USBIN, USBMINUS ;[09] <--- sample 1 - rjmp bit1IsClr ;[10] - breq unstuff1s ;[11] - nop2 ;[12] do not check for SE0 if bit 0 was 1 - in phase, USBIN ;[14] <- phase (one cycle too late) - rjmp bit2AfterSet ;[15] -unstuff1s: - in phase, USBIN ;[13] <- phase - andi fix, ~(1 << 1) ;[14] - lpm ;[07] - nop2 ;[10] -bit1IsClr: - ifrset phase, USBMINUS ;[12] check phase only if D- changed - lpm ;[13] - in phase, USBIN ;[14] <- phase (one cycle too late) - ori shift, 1 << 1 ;[15] - nop ;[16] -bit2AfterClr: - ifioset USBIN, USBMINUS ;[17] <--- sample 2 - rjmp bit2IsSet ;[18] - andi shift, ~(7 << 2) ;[19] - breq unstuff2c ;[20] - in phase, USBIN ;[21] <- phase - rjmp bit3AfterClr ;[22] -unstuff2c: - in phase, USBIN ;[22] <- phase (one cycle too late) - andi fix, ~(1 << 2) ;[23] - nop2 ;[16] - nop2 ;[18] -bit2IsSet: - ifrclr phase, USBMINUS ;[20] check phase only if D- changed - lpm ;[21] - in phase, USBIN ;[22] <- phase (one cycle too late) - ori shift, 1 << 2 ;[23] -bit3AfterSet: - st y+, data ;[24] -entryAfterSet: - ifioclr USBIN, USBMINUS ;[26] <--- sample 3 - rjmp bit3IsClr ;[27] - andi shift, ~(7 << 3) ;[28] - breq unstuff3s ;[29] - in phase, USBIN ;[30] <- phase - rjmp bit4AfterSet ;[31] -unstuff3s: - in phase, USBIN ;[31] <- phase (one cycle too late) - andi fix, ~(1 << 3) ;[32] - nop2 ;[25] - nop2 ;[27] -bit3IsClr: - ifrset phase, USBMINUS ;[29] check phase only if D- changed - lpm ;[30] - in phase, USBIN ;[31] <- phase (one cycle too late) - ori shift, 1 << 3 ;[32] -bit4AfterClr: - mov data, fix ;[33] undo this move by swapping defines -#undef fix -#define fix x1 -#undef data -#define data x2 - ifioset USBIN, USBMINUS ;[34] <--- sample 4 - rjmp bit4IsSet ;[35] - andi shift, ~(7 << 4) ;[36] - breq unstuff4c ;[37] - in phase, USBIN ;[38] <- phase - rjmp bit5AfterClr ;[39] -unstuff4c: - in phase, USBIN ;[39] <- phase (one cycle too late) - andi fix, ~(1 << 4) ;[40] - nop2 ;[33] - nop2 ;[35] -bit4IsSet: - ifrclr phase, USBMINUS ;[37] check phase only if D- changed - lpm ;[38] - in phase, USBIN ;[39] <- phase (one cycle too late) - ori shift, 1 << 4 ;[40] -bit5AfterSet: - ser data ;[41] - ifioclr USBIN, USBMINUS ;[42] <--- sample 5 - rjmp bit5IsClr ;[43] - andi shift, ~(7 << 5) ;[44] - breq unstuff5s ;[45] - in phase, USBIN ;[46] <- phase - rjmp bit6AfterSet ;[47] -unstuff5s: - in phase, USBIN ;[47] <- phase (one cycle too late) - andi fix, ~(1 << 5) ;[48] - nop2 ;[41] - nop2 ;[43] -bit5IsClr: - ifrset phase, USBMINUS ;[45] check phase only if D- changed - lpm ;[46] - in phase, USBIN ;[47] <- phase (one cycle too late) - ori shift, 1 << 5 ;[48] -bit6AfterClr: - subi cnt, 1 ;[49] - brcs overflow ;[50] - ifioset USBIN, USBMINUS ;[51] <--- sample 6 - rjmp bit6IsSet ;[52] - andi shift, ~(3 << 6) ;[53] - cpi shift, 2 ;[54] - in phase, USBIN ;[55] <- phase - brlt unstuff6c ;[56] - rjmp bit7AfterClr ;[57] -unstuff6c: - andi fix, ~(1 << 6) ;[50] - lpm ;[51] -bit6IsSet: - ifrclr phase, USBMINUS ;[54] check phase only if D- changed - lpm ;[55] - in phase, USBIN ;[56] <- phase (one cycle too late) - ori shift, 1 << 6 ;[57] -bit7AfterSet: - ifioclr USBIN, USBMINUS ;[59] <--- sample 7 - rjmp bit7IsClr ;[60] - andi shift, ~(1 << 7) ;[61] - cpi shift, 4 ;[62] - in phase, USBIN ;[63] <- phase - brlt unstuff7s ;[64] - rjmp bit0AfterSet ;[65] -> [00] == [67] -unstuff7s: - andi fix, ~(1 << 7) ;[58] - nop ;[59] - rjmp bit7IsClr ;[60] - -macro POP_STANDARD ; 14 cycles - pop r0 - pop cnt - pop x3 - pop x2 - pop x1 - pop shift - pop YH - endm -macro POP_RETI ; 5 cycles - pop YL - out SREG, YL - pop YL - endm - -#include "asmcommon.inc" - -;---------------------------------------------------------------------------- -; Transmitting data -;---------------------------------------------------------------------------- - -txByteLoop: -txBitloop: -stuffN1Delay: ; [03] - ror shift ;[-5] [11] [63] - brcc doExorN1 ;[-4] [64] - subi x3, 1 ;[-3] - brne commonN1 ;[-2] - lsl shift ;[-1] compensate ror after rjmp stuffDelay - nop ;[00] stuffing consists of just waiting 8 cycles - rjmp stuffN1Delay ;[01] after ror, C bit is reliably clear - -sendNakAndReti: - ldi cnt, USBPID_NAK ;[-19] - rjmp sendCntAndReti ;[-18] -sendAckAndReti: - ldi cnt, USBPID_ACK ;[-17] -sendCntAndReti: - mov r0, cnt ;[-16] - ldi YL, 0 ;[-15] R0 address is 0 - ldi YH, 0 ;[-14] - ldi cnt, 2 ;[-13] -; rjmp usbSendAndReti fallthrough - -; USB spec says: -; idle = J -; J = (D+ = 0), (D- = 1) or USBOUT = 0x01 -; K = (D+ = 1), (D- = 0) or USBOUT = 0x02 -; Spec allows 7.5 bit times from EOP to SOP for replies (= 60 cycles) - -;usbSend: -;pointer to data in 'Y' -;number of bytes in 'cnt' -- including sync byte -;uses: x1...x3, shift, cnt, Y [x1 = mirror USBOUT, x2 = USBMASK, x3 = bitstuff cnt] -;Numbers in brackets are time since first bit of sync pattern is sent (start of instruction) -usbSendAndReti: - in x2, USBDDR ;[-10] 10 cycles until SOP - ori x2, USBMASK ;[-9] - sbi USBOUT, USBMINUS ;[-8] prepare idle state; D+ and D- must have been 0 (no pullups) - out USBDDR, x2 ;[-6] <--- acquire bus - in x1, USBOUT ;[-5] port mirror for tx loop - ldi shift, 0x40 ;[-4] sync byte is first byte sent (we enter loop after ror) - ldi x2, USBMASK ;[-3] -doExorN1: - eor x1, x2 ;[-2] [06] [62] - ldi x3, 6 ;[-1] [07] [63] -commonN1: -stuffN2Delay: - out USBOUT, x1 ;[00] [08] [64] <--- set bit - ror shift ;[01] - brcc doExorN2 ;[02] - subi x3, 1 ;[03] - brne commonN2 ;[04] - lsl shift ;[05] compensate ror after rjmp stuffDelay - rjmp stuffN2Delay ;[06] after ror, C bit is reliably clear -doExorN2: - eor x1, x2 ;[04] [12] - ldi x3, 6 ;[05] [13] -commonN2: - nop2 ;[06] [14] - subi cnt, 171 ;[08] [16] trick: (3 * 171) & 0xff = 1 - out USBOUT, x1 ;[09] [17] <--- set bit - brcs txBitloop ;[10] [27] [44] - -stuff6Delay: - ror shift ;[45] [53] - brcc doExor6 ;[46] - subi x3, 1 ;[47] - brne common6 ;[48] - lsl shift ;[49] compensate ror after rjmp stuffDelay - nop ;[50] stuffing consists of just waiting 8 cycles - rjmp stuff6Delay ;[51] after ror, C bit is reliably clear -doExor6: - eor x1, x2 ;[48] [56] - ldi x3, 6 ;[49] -common6: -stuff7Delay: - ror shift ;[50] [58] - out USBOUT, x1 ;[51] <--- set bit - brcc doExor7 ;[52] - subi x3, 1 ;[53] - brne common7 ;[54] - lsl shift ;[55] compensate ror after rjmp stuffDelay - rjmp stuff7Delay ;[56] after ror, C bit is reliably clear -doExor7: - eor x1, x2 ;[54] [62] - ldi x3, 6 ;[55] -common7: - ld shift, y+ ;[56] - nop ;[58] - tst cnt ;[59] - out USBOUT, x1 ;[60] [00]<--- set bit - brne txByteLoop ;[61] [01] -;make SE0: - cbr x1, USBMASK ;[02] prepare SE0 [spec says EOP may be 15 to 18 cycles] - lds x2, usbNewDeviceAddr;[03] - lsl x2 ;[05] we compare with left shifted address - subi YL, 2 + 0 ;[06] Only assign address on data packets, not ACK/NAK in r0 - sbci YH, 0 ;[07] - out USBOUT, x1 ;[00] <-- out SE0 -- from now 2 bits = 16 cycles until bus idle -;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm: -;set address only after data packet was sent, not after handshake - breq skipAddrAssign ;[01] - sts usbDeviceAddr, x2 ; if not skipped: SE0 is one cycle longer -skipAddrAssign: -;end of usbDeviceAddress transfer - ldi x2, 1<<USB_INTR_PENDING_BIT;[03] int0 occurred during TX -- clear pending flag - USB_STORE_PENDING(x2) ;[04] - ori x1, USBIDLE ;[05] - in x2, USBDDR ;[06] - cbr x2, USBMASK ;[07] set both pins to input - mov x3, x1 ;[08] - cbr x3, USBMASK ;[09] configure no pullup on both pins - lpm ;[10] - lpm ;[13] - out USBOUT, x1 ;[16] <-- out J (idle) -- end of SE0 (EOP signal) - out USBDDR, x2 ;[17] <-- release bus now - out USBOUT, x3 ;[18] <-- ensure no pull-up resistors are active - rjmp doReturn - - - -/***************************************************************************** -The following PHP script generates a code skeleton for the receiver routine: - -<?php - -function printCmdBuffer($thisBit) -{ -global $cycle; - - $nextBit = ($thisBit + 1) % 8; - $s = ob_get_contents(); - ob_end_clean(); - $s = str_replace("#", $thisBit, $s); - $s = str_replace("@", $nextBit, $s); - $lines = explode("\n", $s); - for($i = 0; $i < count($lines); $i++){ - $s = $lines[$i]; - if(ereg("\\[([0-9-][0-9])\\]", $s, $regs)){ - $c = $cycle + (int)$regs[1]; - $s = ereg_replace("\\[[0-9-][0-9]\\]", sprintf("[%02d]", $c), $s); - } - if(strlen($s) > 0) - echo "$s\n"; - } -} - -function printBit($isAfterSet, $bitNum) -{ - ob_start(); - if($isAfterSet){ -?> - ifioclr USBIN, USBMINUS ;[00] <--- sample - rjmp bit#IsClr ;[01] - andi shift, ~(7 << #) ;[02] - breq unstuff#s ;[03] - in phase, USBIN ;[04] <- phase - rjmp bit@AfterSet ;[05] -unstuff#s: - in phase, USBIN ;[05] <- phase (one cycle too late) - andi fix, ~(1 << #) ;[06] - nop2 ;[-1] - nop2 ;[01] -bit#IsClr: - ifrset phase, USBMINUS ;[03] check phase only if D- changed - lpm ;[04] - in phase, USBIN ;[05] <- phase (one cycle too late) - ori shift, 1 << # ;[06] -<?php - }else{ -?> - ifioset USBIN, USBMINUS ;[00] <--- sample - rjmp bit#IsSet ;[01] - andi shift, ~(7 << #) ;[02] - breq unstuff#c ;[03] - in phase, USBIN ;[04] <- phase - rjmp bit@AfterClr ;[05] -unstuff#c: - in phase, USBIN ;[05] <- phase (one cycle too late) - andi fix, ~(1 << #) ;[06] - nop2 ;[-1] - nop2 ;[01] -bit#IsSet: - ifrclr phase, USBMINUS ;[03] check phase only if D- changed - lpm ;[04] - in phase, USBIN ;[05] <- phase (one cycle too late) - ori shift, 1 << # ;[06] -<?php - } - printCmdBuffer($bitNum); -} - -$bitStartCycles = array(1, 9, 17, 26, 34, 42, 51, 59); -for($i = 0; $i < 16; $i++){ - $bit = $i % 8; - $emitClrCode = ($i + (int)($i / 8)) % 2; - $cycle = $bitStartCycles[$bit]; - if($emitClrCode){ - printf("bit%dAfterClr:\n", $bit); - }else{ - printf("bit%dAfterSet:\n", $bit); - } - ob_start(); - echo " ***** ;[-1]\n"; - printCmdBuffer($bit); - printBit(!$emitClrCode, $bit); - if($i == 7) - echo "\n"; -} - -?> -*****************************************************************************/ diff --git a/tmk_core/protocol/vusb/usbdrv/usbdrvasm15.inc b/tmk_core/protocol/vusb/usbdrv/usbdrvasm15.inc deleted file mode 100644 index 401b7f8fff..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/usbdrvasm15.inc +++ /dev/null @@ -1,423 +0,0 @@ -/* Name: usbdrvasm15.inc - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: contributed by V. Bosch - * Creation Date: 2007-08-06 - * Tabsize: 4 - * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * Revision: $Id: usbdrvasm15.inc 740 2009-04-13 18:23:31Z cs $ - */ - -/* Do not link this file! Link usbdrvasm.S instead, which includes the - * appropriate implementation! - */ - -/* -General Description: -This file is the 15 MHz version of the asssembler part of the USB driver. It -requires a 15 MHz crystal (not a ceramic resonator and not a calibrated RC -oscillator). - -See usbdrv.h for a description of the entire driver. - -Since almost all of this code is timing critical, don't change unless you -really know what you are doing! Many parts require not only a maximum number -of CPU cycles, but even an exact number of cycles! -*/ - -;max stack usage: [ret(2), YL, SREG, YH, bitcnt, shift, x1, x2, x3, x4, cnt] = 12 bytes -;nominal frequency: 15 MHz -> 10.0 cycles per bit, 80.0 cycles per byte -; Numbers in brackets are clocks counted from center of last sync bit -; when instruction starts - -;---------------------------------------------------------------------------- -; order of registers pushed: -; YL, SREG [sofError] YH, shift, x1, x2, x3, bitcnt, cnt, x4 -;---------------------------------------------------------------------------- -USB_INTR_VECTOR: - push YL ;2 push only what is necessary to sync with edge ASAP - in YL, SREG ;1 - push YL ;2 -;---------------------------------------------------------------------------- -; Synchronize with sync pattern: -; -; sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K] -; sync up with J to K edge during sync pattern -- use fastest possible loops -;The first part waits at most 1 bit long since we must be in sync pattern. -;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to -;waitForJ, ensure that this prerequisite is met. -waitForJ: - inc YL - sbis USBIN, USBMINUS - brne waitForJ ; just make sure we have ANY timeout -;------------------------------------------------------------------------------- -; The following code results in a sampling window of < 1/4 bit -; which meets the spec. -;------------------------------------------------------------------------------- -waitForK: ;- - sbis USBIN, USBMINUS ;1 [00] <-- sample - rjmp foundK ;2 [01] - sbis USBIN, USBMINUS ; <-- sample - rjmp foundK - sbis USBIN, USBMINUS ; <-- sample - rjmp foundK - sbis USBIN, USBMINUS ; <-- sample - rjmp foundK - sbis USBIN, USBMINUS ; <-- sample - rjmp foundK - sbis USBIN, USBMINUS ; <-- sample - rjmp foundK -#if USB_COUNT_SOF - lds YL, usbSofCount - inc YL - sts usbSofCount, YL -#endif /* USB_COUNT_SOF */ -#ifdef USB_SOF_HOOK - USB_SOF_HOOK -#endif - rjmp sofError -;------------------------------------------------------------------------------ -; {3, 5} after falling D- edge, average delay: 4 cycles [we want 5 for -; center sampling] -; we have 1 bit time for setup purposes, then sample again. -; Numbers in brackets are cycles from center of first sync (double K) -; bit after the instruction -;------------------------------------------------------------------------------ -foundK: ;- [02] - lds YL, usbInputBufOffset;2 [03+04] tx loop - push YH ;2 [05+06] - clr YH ;1 [07] - subi YL, lo8(-(usbRxBuf)) ;1 [08] [rx loop init] - sbci YH, hi8(-(usbRxBuf)) ;1 [09] [rx loop init] - push shift ;2 [10+11] - ser shift ;1 [12] - sbis USBIN, USBMINUS ;1 [-1] [13] <--sample:we want two bits K (sample 1 cycle too early) - rjmp haveTwoBitsK ;2 [00] [14] - pop shift ;2 [15+16] undo the push from before - pop YH ;2 [17+18] undo the push from before - rjmp waitForK ;2 [19+20] this was not the end of sync, retry -; The entire loop from waitForK until rjmp waitForK above must not exceed two -; bit times (= 20 cycles). - -;---------------------------------------------------------------------------- -; push more registers and initialize values while we sample the first bits: -;---------------------------------------------------------------------------- -haveTwoBitsK: ;- [01] - push x1 ;2 [02+03] - push x2 ;2 [04+05] - push x3 ;2 [06+07] - push bitcnt ;2 [08+09] - in x1, USBIN ;1 [00] [10] <-- sample bit 0 - bst x1, USBMINUS ;1 [01] - bld shift, 0 ;1 [02] - push cnt ;2 [03+04] - ldi cnt, USB_BUFSIZE ;1 [05] - push x4 ;2 [06+07] tx loop - rjmp rxLoop ;2 [08] -;---------------------------------------------------------------------------- -; Receiver loop (numbers in brackets are cycles within byte after instr) -;---------------------------------------------------------------------------- -unstuff0: ;- [07] (branch taken) - andi x3, ~0x01 ;1 [08] - mov x1, x2 ;1 [09] x2 contains last sampled (stuffed) bit - in x2, USBIN ;1 [00] [10] <-- sample bit 1 again - andi x2, USBMASK ;1 [01] - breq se0Hop ;1 [02] SE0 check for bit 1 - ori shift, 0x01 ;1 [03] 0b00000001 - nop ;1 [04] - rjmp didUnstuff0 ;2 [05] -;----------------------------------------------------- -unstuff1: ;- [05] (branch taken) - mov x2, x1 ;1 [06] x1 contains last sampled (stuffed) bit - andi x3, ~0x02 ;1 [07] - ori shift, 0x02 ;1 [08] 0b00000010 - nop ;1 [09] - in x1, USBIN ;1 [00] [10] <-- sample bit 2 again - andi x1, USBMASK ;1 [01] - breq se0Hop ;1 [02] SE0 check for bit 2 - rjmp didUnstuff1 ;2 [03] -;----------------------------------------------------- -unstuff2: ;- [05] (branch taken) - andi x3, ~0x04 ;1 [06] - ori shift, 0x04 ;1 [07] 0b00000100 - mov x1, x2 ;1 [08] x2 contains last sampled (stuffed) bit - nop ;1 [09] - in x2, USBIN ;1 [00] [10] <-- sample bit 3 - andi x2, USBMASK ;1 [01] - breq se0Hop ;1 [02] SE0 check for bit 3 - rjmp didUnstuff2 ;2 [03] -;----------------------------------------------------- -unstuff3: ;- [00] [10] (branch taken) - in x2, USBIN ;1 [01] [11] <-- sample stuffed bit 3 one cycle too late - andi x2, USBMASK ;1 [02] - breq se0Hop ;1 [03] SE0 check for stuffed bit 3 - andi x3, ~0x08 ;1 [04] - ori shift, 0x08 ;1 [05] 0b00001000 - rjmp didUnstuff3 ;2 [06] -;---------------------------------------------------------------------------- -; extra jobs done during bit interval: -; -; bit 0: store, clear [SE0 is unreliable here due to bit dribbling in hubs], -; overflow check, jump to the head of rxLoop -; bit 1: SE0 check -; bit 2: SE0 check, recovery from delay [bit 0 tasks took too long] -; bit 3: SE0 check, recovery from delay [bit 0 tasks took too long] -; bit 4: SE0 check, none -; bit 5: SE0 check, none -; bit 6: SE0 check, none -; bit 7: SE0 check, reconstruct: x3 is 0 at bit locations we changed, 1 at others -;---------------------------------------------------------------------------- -rxLoop: ;- [09] - in x2, USBIN ;1 [00] [10] <-- sample bit 1 (or possibly bit 0 stuffed) - andi x2, USBMASK ;1 [01] - brne SkipSe0Hop ;1 [02] -se0Hop: ;- [02] - rjmp se0 ;2 [03] SE0 check for bit 1 -SkipSe0Hop: ;- [03] - ser x3 ;1 [04] - andi shift, 0xf9 ;1 [05] 0b11111001 - breq unstuff0 ;1 [06] -didUnstuff0: ;- [06] - eor x1, x2 ;1 [07] - bst x1, USBMINUS ;1 [08] - bld shift, 1 ;1 [09] - in x1, USBIN ;1 [00] [10] <-- sample bit 2 (or possibly bit 1 stuffed) - andi x1, USBMASK ;1 [01] - breq se0Hop ;1 [02] SE0 check for bit 2 - andi shift, 0xf3 ;1 [03] 0b11110011 - breq unstuff1 ;1 [04] do remaining work for bit 1 -didUnstuff1: ;- [04] - eor x2, x1 ;1 [05] - bst x2, USBMINUS ;1 [06] - bld shift, 2 ;1 [07] - nop2 ;2 [08+09] - in x2, USBIN ;1 [00] [10] <-- sample bit 3 (or possibly bit 2 stuffed) - andi x2, USBMASK ;1 [01] - breq se0Hop ;1 [02] SE0 check for bit 3 - andi shift, 0xe7 ;1 [03] 0b11100111 - breq unstuff2 ;1 [04] -didUnstuff2: ;- [04] - eor x1, x2 ;1 [05] - bst x1, USBMINUS ;1 [06] - bld shift, 3 ;1 [07] -didUnstuff3: ;- [07] - andi shift, 0xcf ;1 [08] 0b11001111 - breq unstuff3 ;1 [09] - in x1, USBIN ;1 [00] [10] <-- sample bit 4 - andi x1, USBMASK ;1 [01] - breq se0Hop ;1 [02] SE0 check for bit 4 - eor x2, x1 ;1 [03] - bst x2, USBMINUS ;1 [04] - bld shift, 4 ;1 [05] -didUnstuff4: ;- [05] - andi shift, 0x9f ;1 [06] 0b10011111 - breq unstuff4 ;1 [07] - nop2 ;2 [08+09] - in x2, USBIN ;1 [00] [10] <-- sample bit 5 - andi x2, USBMASK ;1 [01] - breq se0 ;1 [02] SE0 check for bit 5 - eor x1, x2 ;1 [03] - bst x1, USBMINUS ;1 [04] - bld shift, 5 ;1 [05] -didUnstuff5: ;- [05] - andi shift, 0x3f ;1 [06] 0b00111111 - breq unstuff5 ;1 [07] - nop2 ;2 [08+09] - in x1, USBIN ;1 [00] [10] <-- sample bit 6 - andi x1, USBMASK ;1 [01] - breq se0 ;1 [02] SE0 check for bit 6 - eor x2, x1 ;1 [03] - bst x2, USBMINUS ;1 [04] - bld shift, 6 ;1 [05] -didUnstuff6: ;- [05] - cpi shift, 0x02 ;1 [06] 0b00000010 - brlo unstuff6 ;1 [07] - nop2 ;2 [08+09] - in x2, USBIN ;1 [00] [10] <-- sample bit 7 - andi x2, USBMASK ;1 [01] - breq se0 ;1 [02] SE0 check for bit 7 - eor x1, x2 ;1 [03] - bst x1, USBMINUS ;1 [04] - bld shift, 7 ;1 [05] -didUnstuff7: ;- [05] - cpi shift, 0x04 ;1 [06] 0b00000100 - brlo unstuff7 ;1 [07] - eor x3, shift ;1 [08] reconstruct: x3 is 0 at bit locations we changed, 1 at others - nop ;1 [09] - in x1, USBIN ;1 [00] [10] <-- sample bit 0 - st y+, x3 ;2 [01+02] store data - eor x2, x1 ;1 [03] - bst x2, USBMINUS ;1 [04] - bld shift, 0 ;1 [05] - subi cnt, 1 ;1 [06] - brcs overflow ;1 [07] - rjmp rxLoop ;2 [08] -;----------------------------------------------------- -unstuff4: ;- [08] - andi x3, ~0x10 ;1 [09] - in x1, USBIN ;1 [00] [10] <-- sample stuffed bit 4 - andi x1, USBMASK ;1 [01] - breq se0 ;1 [02] SE0 check for stuffed bit 4 - ori shift, 0x10 ;1 [03] - rjmp didUnstuff4 ;2 [04] -;----------------------------------------------------- -unstuff5: ;- [08] - ori shift, 0x20 ;1 [09] - in x2, USBIN ;1 [00] [10] <-- sample stuffed bit 5 - andi x2, USBMASK ;1 [01] - breq se0 ;1 [02] SE0 check for stuffed bit 5 - andi x3, ~0x20 ;1 [03] - rjmp didUnstuff5 ;2 [04] -;----------------------------------------------------- -unstuff6: ;- [08] - andi x3, ~0x40 ;1 [09] - in x1, USBIN ;1 [00] [10] <-- sample stuffed bit 6 - andi x1, USBMASK ;1 [01] - breq se0 ;1 [02] SE0 check for stuffed bit 6 - ori shift, 0x40 ;1 [03] - rjmp didUnstuff6 ;2 [04] -;----------------------------------------------------- -unstuff7: ;- [08] - andi x3, ~0x80 ;1 [09] - in x2, USBIN ;1 [00] [10] <-- sample stuffed bit 7 - andi x2, USBMASK ;1 [01] - breq se0 ;1 [02] SE0 check for stuffed bit 7 - ori shift, 0x80 ;1 [03] - rjmp didUnstuff7 ;2 [04] - -macro POP_STANDARD ; 16 cycles - pop x4 - pop cnt - pop bitcnt - pop x3 - pop x2 - pop x1 - pop shift - pop YH - endm -macro POP_RETI ; 5 cycles - pop YL - out SREG, YL - pop YL - endm - -#include "asmcommon.inc" - -;--------------------------------------------------------------------------- -; USB spec says: -; idle = J -; J = (D+ = 0), (D- = 1) -; K = (D+ = 1), (D- = 0) -; Spec allows 7.5 bit times from EOP to SOP for replies -;--------------------------------------------------------------------------- -bitstuffN: ;- [04] - eor x1, x4 ;1 [05] - clr x2 ;1 [06] - nop ;1 [07] - rjmp didStuffN ;1 [08] -;--------------------------------------------------------------------------- -bitstuff6: ;- [04] - eor x1, x4 ;1 [05] - clr x2 ;1 [06] - rjmp didStuff6 ;1 [07] -;--------------------------------------------------------------------------- -bitstuff7: ;- [02] - eor x1, x4 ;1 [03] - clr x2 ;1 [06] - nop ;1 [05] - rjmp didStuff7 ;1 [06] -;--------------------------------------------------------------------------- -sendNakAndReti: ;- [-19] - ldi x3, USBPID_NAK ;1 [-18] - rjmp sendX3AndReti ;1 [-17] -;--------------------------------------------------------------------------- -sendAckAndReti: ;- [-17] - ldi cnt, USBPID_ACK ;1 [-16] -sendCntAndReti: ;- [-16] - mov x3, cnt ;1 [-15] -sendX3AndReti: ;- [-15] - ldi YL, 20 ;1 [-14] x3==r20 address is 20 - ldi YH, 0 ;1 [-13] - ldi cnt, 2 ;1 [-12] -; rjmp usbSendAndReti fallthrough -;--------------------------------------------------------------------------- -;usbSend: -;pointer to data in 'Y' -;number of bytes in 'cnt' -- including sync byte [range 2 ... 12] -;uses: x1...x4, btcnt, shift, cnt, Y -;Numbers in brackets are time since first bit of sync pattern is sent -;We need not to match the transfer rate exactly because the spec demands -;only 1.5% precision anyway. -usbSendAndReti: ;- [-13] 13 cycles until SOP - in x2, USBDDR ;1 [-12] - ori x2, USBMASK ;1 [-11] - sbi USBOUT, USBMINUS ;2 [-09-10] prepare idle state; D+ and D- must have been 0 (no pullups) - in x1, USBOUT ;1 [-08] port mirror for tx loop - out USBDDR, x2 ;1 [-07] <- acquire bus - ; need not init x2 (bitstuff history) because sync starts with 0 - ldi x4, USBMASK ;1 [-06] exor mask - ldi shift, 0x80 ;1 [-05] sync byte is first byte sent - ldi bitcnt, 6 ;1 [-04] -txBitLoop: ;- [-04] [06] - sbrs shift, 0 ;1 [-03] [07] - eor x1, x4 ;1 [-02] [08] - ror shift ;1 [-01] [09] -didStuffN: ;- [09] - out USBOUT, x1 ;1 [00] [10] <-- out N - ror x2 ;1 [01] - cpi x2, 0xfc ;1 [02] - brcc bitstuffN ;1 [03] - dec bitcnt ;1 [04] - brne txBitLoop ;1 [05] - sbrs shift, 0 ;1 [06] - eor x1, x4 ;1 [07] - ror shift ;1 [08] -didStuff6: ;- [08] - nop ;1 [09] - out USBOUT, x1 ;1 [00] [10] <-- out 6 - ror x2 ;1 [01] - cpi x2, 0xfc ;1 [02] - brcc bitstuff6 ;1 [03] - sbrs shift, 0 ;1 [04] - eor x1, x4 ;1 [05] - ror shift ;1 [06] - ror x2 ;1 [07] -didStuff7: ;- [07] - ldi bitcnt, 6 ;1 [08] - cpi x2, 0xfc ;1 [09] - out USBOUT, x1 ;1 [00] [10] <-- out 7 - brcc bitstuff7 ;1 [01] - ld shift, y+ ;2 [02+03] - dec cnt ;1 [04] - brne txBitLoop ;1 [05] -makeSE0: - cbr x1, USBMASK ;1 [06] prepare SE0 [spec says EOP may be 19 to 23 cycles] - lds x2, usbNewDeviceAddr;2 [07+08] - lsl x2 ;1 [09] we compare with left shifted address -;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm: -;set address only after data packet was sent, not after handshake - out USBOUT, x1 ;1 [00] [10] <-- out SE0-- from now 2 bits==20 cycl. until bus idle - subi YL, 20 + 2 ;1 [01] Only assign address on data packets, not ACK/NAK in x3 - sbci YH, 0 ;1 [02] - breq skipAddrAssign ;1 [03] - sts usbDeviceAddr, x2 ;2 [04+05] if not skipped: SE0 is one cycle longer -;---------------------------------------------------------------------------- -;end of usbDeviceAddress transfer -skipAddrAssign: ;- [03/04] - ldi x2, 1<<USB_INTR_PENDING_BIT ;1 [05] int0 occurred during TX -- clear pending flag - USB_STORE_PENDING(x2) ;1 [06] - ori x1, USBIDLE ;1 [07] - in x2, USBDDR ;1 [08] - cbr x2, USBMASK ;1 [09] set both pins to input - mov x3, x1 ;1 [10] - cbr x3, USBMASK ;1 [11] configure no pullup on both pins - ldi x4, 3 ;1 [12] -se0Delay: ;- [12] [15] - dec x4 ;1 [13] [16] - brne se0Delay ;1 [14] [17] - nop2 ;2 [18+19] - out USBOUT, x1 ;1 [20] <--out J (idle) -- end of SE0 (EOP sig.) - out USBDDR, x2 ;1 [21] <--release bus now - out USBOUT, x3 ;1 [22] <--ensure no pull-up resistors are active - rjmp doReturn ;1 [23] -;--------------------------------------------------------------------------- diff --git a/tmk_core/protocol/vusb/usbdrv/usbdrvasm16.inc b/tmk_core/protocol/vusb/usbdrv/usbdrvasm16.inc deleted file mode 100644 index 207b6e48a1..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/usbdrvasm16.inc +++ /dev/null @@ -1,346 +0,0 @@ -/* Name: usbdrvasm16.inc - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2007-06-15 - * Tabsize: 4 - * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * Revision: $Id: usbdrvasm16.inc 760 2009-08-09 18:59:43Z cs $ - */ - -/* Do not link this file! Link usbdrvasm.S instead, which includes the - * appropriate implementation! - */ - -/* -General Description: -This file is the 16 MHz version of the asssembler part of the USB driver. It -requires a 16 MHz crystal (not a ceramic resonator and not a calibrated RC -oscillator). - -See usbdrv.h for a description of the entire driver. - -Since almost all of this code is timing critical, don't change unless you -really know what you are doing! Many parts require not only a maximum number -of CPU cycles, but even an exact number of cycles! -*/ - -;max stack usage: [ret(2), YL, SREG, YH, bitcnt, shift, x1, x2, x3, x4, cnt] = 12 bytes -;nominal frequency: 16 MHz -> 10.6666666 cycles per bit, 85.333333333 cycles per byte -; Numbers in brackets are clocks counted from center of last sync bit -; when instruction starts - -USB_INTR_VECTOR: -;order of registers pushed: YL, SREG YH, [sofError], bitcnt, shift, x1, x2, x3, x4, cnt - push YL ;[-25] push only what is necessary to sync with edge ASAP - in YL, SREG ;[-23] - push YL ;[-22] - push YH ;[-20] -;---------------------------------------------------------------------------- -; Synchronize with sync pattern: -;---------------------------------------------------------------------------- -;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K] -;sync up with J to K edge during sync pattern -- use fastest possible loops -;The first part waits at most 1 bit long since we must be in sync pattern. -;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to -;waitForJ, ensure that this prerequisite is met. -waitForJ: - inc YL - sbis USBIN, USBMINUS - brne waitForJ ; just make sure we have ANY timeout -waitForK: -;The following code results in a sampling window of < 1/4 bit which meets the spec. - sbis USBIN, USBMINUS ;[-15] - rjmp foundK ;[-14] - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK -#if USB_COUNT_SOF - lds YL, usbSofCount - inc YL - sts usbSofCount, YL -#endif /* USB_COUNT_SOF */ -#ifdef USB_SOF_HOOK - USB_SOF_HOOK -#endif - rjmp sofError -foundK: ;[-12] -;{3, 5} after falling D- edge, average delay: 4 cycles [we want 5 for center sampling] -;we have 1 bit time for setup purposes, then sample again. Numbers in brackets -;are cycles from center of first sync (double K) bit after the instruction - push bitcnt ;[-12] -; [---] ;[-11] - lds YL, usbInputBufOffset;[-10] -; [---] ;[-9] - clr YH ;[-8] - subi YL, lo8(-(usbRxBuf));[-7] [rx loop init] - sbci YH, hi8(-(usbRxBuf));[-6] [rx loop init] - push shift ;[-5] -; [---] ;[-4] - ldi bitcnt, 0x55 ;[-3] [rx loop init] - sbis USBIN, USBMINUS ;[-2] we want two bits K (sample 2 cycles too early) - rjmp haveTwoBitsK ;[-1] - pop shift ;[0] undo the push from before - pop bitcnt ;[2] undo the push from before - rjmp waitForK ;[4] this was not the end of sync, retry -; The entire loop from waitForK until rjmp waitForK above must not exceed two -; bit times (= 21 cycles). - -;---------------------------------------------------------------------------- -; push more registers and initialize values while we sample the first bits: -;---------------------------------------------------------------------------- -haveTwoBitsK: - push x1 ;[1] - push x2 ;[3] - push x3 ;[5] - ldi shift, 0 ;[7] - ldi x3, 1<<4 ;[8] [rx loop init] first sample is inverse bit, compensate that - push x4 ;[9] == leap - - in x1, USBIN ;[11] <-- sample bit 0 - andi x1, USBMASK ;[12] - bst x1, USBMINUS ;[13] - bld shift, 7 ;[14] - push cnt ;[15] - ldi leap, 0 ;[17] [rx loop init] - ldi cnt, USB_BUFSIZE;[18] [rx loop init] - rjmp rxbit1 ;[19] arrives at [21] - -;---------------------------------------------------------------------------- -; Receiver loop (numbers in brackets are cycles within byte after instr) -;---------------------------------------------------------------------------- - -; duration of unstuffing code should be 10.66666667 cycles. We adjust "leap" -; accordingly to approximate this value in the long run. - -unstuff6: - andi x2, USBMASK ;[03] - ori x3, 1<<6 ;[04] will not be shifted any more - andi shift, ~0x80;[05] - mov x1, x2 ;[06] sampled bit 7 is actually re-sampled bit 6 - subi leap, -1 ;[07] total duration = 11 bits -> subtract 1/3 - rjmp didUnstuff6 ;[08] - -unstuff7: - ori x3, 1<<7 ;[09] will not be shifted any more - in x2, USBIN ;[00] [10] re-sample bit 7 - andi x2, USBMASK ;[01] - andi shift, ~0x80;[02] - subi leap, 2 ;[03] total duration = 10 bits -> add 1/3 - rjmp didUnstuff7 ;[04] - -unstuffEven: - ori x3, 1<<6 ;[09] will be shifted right 6 times for bit 0 - in x1, USBIN ;[00] [10] - andi shift, ~0x80;[01] - andi x1, USBMASK ;[02] - breq se0 ;[03] - subi leap, -1 ;[04] total duration = 11 bits -> subtract 1/3 - nop2 ;[05] - rjmp didUnstuffE ;[06] - -unstuffOdd: - ori x3, 1<<5 ;[09] will be shifted right 4 times for bit 1 - in x2, USBIN ;[00] [10] - andi shift, ~0x80;[01] - andi x2, USBMASK ;[02] - breq se0 ;[03] - subi leap, -1 ;[04] total duration = 11 bits -> subtract 1/3 - nop2 ;[05] - rjmp didUnstuffO ;[06] - -rxByteLoop: - andi x1, USBMASK ;[03] - eor x2, x1 ;[04] - subi leap, 1 ;[05] - brpl skipLeap ;[06] - subi leap, -3 ;1 one leap cycle every 3rd byte -> 85 + 1/3 cycles per byte - nop ;1 -skipLeap: - subi x2, 1 ;[08] - ror shift ;[09] -didUnstuff6: - cpi shift, 0xfc ;[10] - in x2, USBIN ;[00] [11] <-- sample bit 7 - brcc unstuff6 ;[01] - andi x2, USBMASK ;[02] - eor x1, x2 ;[03] - subi x1, 1 ;[04] - ror shift ;[05] -didUnstuff7: - cpi shift, 0xfc ;[06] - brcc unstuff7 ;[07] - eor x3, shift ;[08] reconstruct: x3 is 1 at bit locations we changed, 0 at others - st y+, x3 ;[09] store data -rxBitLoop: - in x1, USBIN ;[00] [11] <-- sample bit 0/2/4 - andi x1, USBMASK ;[01] - eor x2, x1 ;[02] - andi x3, 0x3f ;[03] topmost two bits reserved for 6 and 7 - subi x2, 1 ;[04] - ror shift ;[05] - cpi shift, 0xfc ;[06] - brcc unstuffEven ;[07] -didUnstuffE: - lsr x3 ;[08] - lsr x3 ;[09] -rxbit1: - in x2, USBIN ;[00] [10] <-- sample bit 1/3/5 - andi x2, USBMASK ;[01] - breq se0 ;[02] - eor x1, x2 ;[03] - subi x1, 1 ;[04] - ror shift ;[05] - cpi shift, 0xfc ;[06] - brcc unstuffOdd ;[07] -didUnstuffO: - subi bitcnt, 0xab;[08] == addi 0x55, 0x55 = 0x100/3 - brcs rxBitLoop ;[09] - - subi cnt, 1 ;[10] - in x1, USBIN ;[00] [11] <-- sample bit 6 - brcc rxByteLoop ;[01] - rjmp overflow - -macro POP_STANDARD ; 14 cycles - pop cnt - pop x4 - pop x3 - pop x2 - pop x1 - pop shift - pop bitcnt - endm -macro POP_RETI ; 7 cycles - pop YH - pop YL - out SREG, YL - pop YL - endm - -#include "asmcommon.inc" - -; USB spec says: -; idle = J -; J = (D+ = 0), (D- = 1) -; K = (D+ = 1), (D- = 0) -; Spec allows 7.5 bit times from EOP to SOP for replies - -bitstuffN: - eor x1, x4 ;[5] - ldi x2, 0 ;[6] - nop2 ;[7] - nop ;[9] - out USBOUT, x1 ;[10] <-- out - rjmp didStuffN ;[0] - -bitstuff6: - eor x1, x4 ;[5] - ldi x2, 0 ;[6] Carry is zero due to brcc - rol shift ;[7] compensate for ror shift at branch destination - rjmp didStuff6 ;[8] - -bitstuff7: - ldi x2, 0 ;[2] Carry is zero due to brcc - rjmp didStuff7 ;[3] - - -sendNakAndReti: - ldi x3, USBPID_NAK ;[-18] - rjmp sendX3AndReti ;[-17] -sendAckAndReti: - ldi cnt, USBPID_ACK ;[-17] -sendCntAndReti: - mov x3, cnt ;[-16] -sendX3AndReti: - ldi YL, 20 ;[-15] x3==r20 address is 20 - ldi YH, 0 ;[-14] - ldi cnt, 2 ;[-13] -; rjmp usbSendAndReti fallthrough - -;usbSend: -;pointer to data in 'Y' -;number of bytes in 'cnt' -- including sync byte [range 2 ... 12] -;uses: x1...x4, btcnt, shift, cnt, Y -;Numbers in brackets are time since first bit of sync pattern is sent -;We don't match the transfer rate exactly (don't insert leap cycles every third -;byte) because the spec demands only 1.5% precision anyway. -usbSendAndReti: ; 12 cycles until SOP - in x2, USBDDR ;[-12] - ori x2, USBMASK ;[-11] - sbi USBOUT, USBMINUS;[-10] prepare idle state; D+ and D- must have been 0 (no pullups) - in x1, USBOUT ;[-8] port mirror for tx loop - out USBDDR, x2 ;[-7] <- acquire bus -; need not init x2 (bitstuff history) because sync starts with 0 - ldi x4, USBMASK ;[-6] exor mask - ldi shift, 0x80 ;[-5] sync byte is first byte sent -txByteLoop: - ldi bitcnt, 0x35 ;[-4] [6] binary 0011 0101 -txBitLoop: - sbrs shift, 0 ;[-3] [7] - eor x1, x4 ;[-2] [8] - out USBOUT, x1 ;[-1] [9] <-- out N - ror shift ;[0] [10] - ror x2 ;[1] -didStuffN: - cpi x2, 0xfc ;[2] - brcc bitstuffN ;[3] - lsr bitcnt ;[4] - brcc txBitLoop ;[5] - brne txBitLoop ;[6] - - sbrs shift, 0 ;[7] - eor x1, x4 ;[8] -didStuff6: - out USBOUT, x1 ;[-1] [9] <-- out 6 - ror shift ;[0] [10] - ror x2 ;[1] - cpi x2, 0xfc ;[2] - brcc bitstuff6 ;[3] - ror shift ;[4] -didStuff7: - ror x2 ;[5] - sbrs x2, 7 ;[6] - eor x1, x4 ;[7] - nop ;[8] - cpi x2, 0xfc ;[9] - out USBOUT, x1 ;[-1][10] <-- out 7 - brcc bitstuff7 ;[0] [11] - ld shift, y+ ;[1] - dec cnt ;[3] - brne txByteLoop ;[4] -;make SE0: - cbr x1, USBMASK ;[5] prepare SE0 [spec says EOP may be 21 to 25 cycles] - lds x2, usbNewDeviceAddr;[6] - lsl x2 ;[8] we compare with left shifted address - subi YL, 20 + 2 ;[9] Only assign address on data packets, not ACK/NAK in x3 - sbci YH, 0 ;[10] - out USBOUT, x1 ;[11] <-- out SE0 -- from now 2 bits = 22 cycles until bus idle -;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm: -;set address only after data packet was sent, not after handshake - breq skipAddrAssign ;[0] - sts usbDeviceAddr, x2; if not skipped: SE0 is one cycle longer -skipAddrAssign: -;end of usbDeviceAddress transfer - ldi x2, 1<<USB_INTR_PENDING_BIT;[2] int0 occurred during TX -- clear pending flag - USB_STORE_PENDING(x2) ;[3] - ori x1, USBIDLE ;[4] - in x2, USBDDR ;[5] - cbr x2, USBMASK ;[6] set both pins to input - mov x3, x1 ;[7] - cbr x3, USBMASK ;[8] configure no pullup on both pins - ldi x4, 4 ;[9] -se0Delay: - dec x4 ;[10] [13] [16] [19] - brne se0Delay ;[11] [14] [17] [20] - out USBOUT, x1 ;[21] <-- out J (idle) -- end of SE0 (EOP signal) - out USBDDR, x2 ;[22] <-- release bus now - out USBOUT, x3 ;[23] <-- ensure no pull-up resistors are active - rjmp doReturn diff --git a/tmk_core/protocol/vusb/usbdrv/usbdrvasm165.inc b/tmk_core/protocol/vusb/usbdrv/usbdrvasm165.inc deleted file mode 100644 index 79b3c61cf8..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/usbdrvasm165.inc +++ /dev/null @@ -1,453 +0,0 @@ -/* Name: usbdrvasm165.inc - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2007-04-22 - * Tabsize: 4 - * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * Revision: $Id: usbdrvasm165.inc 740 2009-04-13 18:23:31Z cs $ - */ - -/* Do not link this file! Link usbdrvasm.S instead, which includes the - * appropriate implementation! - */ - -/* -General Description: -This file is the 16.5 MHz version of the USB driver. It is intended for the -ATTiny45 and similar controllers running on 16.5 MHz internal RC oscillator. -This version contains a phase locked loop in the receiver routine to cope with -slight clock rate deviations of up to +/- 1%. - -See usbdrv.h for a description of the entire driver. - -Since almost all of this code is timing critical, don't change unless you -really know what you are doing! Many parts require not only a maximum number -of CPU cycles, but even an exact number of cycles! -*/ - -;Software-receiver engine. Strict timing! Don't change unless you can preserve timing! -;interrupt response time: 4 cycles + insn running = 7 max if interrupts always enabled -;max allowable interrupt latency: 59 cycles -> max 52 cycles interrupt disable -;max stack usage: [ret(2), r0, SREG, YL, YH, shift, x1, x2, x3, x4, cnt] = 12 bytes -;nominal frequency: 16.5 MHz -> 11 cycles per bit -; 16.3125 MHz < F_CPU < 16.6875 MHz (+/- 1.1%) -; Numbers in brackets are clocks counted from center of last sync bit -; when instruction starts - - -USB_INTR_VECTOR: -;order of registers pushed: YL, SREG [sofError], r0, YH, shift, x1, x2, x3, x4, cnt - push YL ;[-23] push only what is necessary to sync with edge ASAP - in YL, SREG ;[-21] - push YL ;[-20] -;---------------------------------------------------------------------------- -; Synchronize with sync pattern: -;---------------------------------------------------------------------------- -;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K] -;sync up with J to K edge during sync pattern -- use fastest possible loops -;The first part waits at most 1 bit long since we must be in sync pattern. -;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to -;waitForJ, ensure that this prerequisite is met. -waitForJ: - inc YL - sbis USBIN, USBMINUS - brne waitForJ ; just make sure we have ANY timeout -waitForK: -;The following code results in a sampling window of < 1/4 bit which meets the spec. - sbis USBIN, USBMINUS ;[-15] - rjmp foundK ;[-14] - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK -#if USB_COUNT_SOF - lds YL, usbSofCount - inc YL - sts usbSofCount, YL -#endif /* USB_COUNT_SOF */ -#ifdef USB_SOF_HOOK - USB_SOF_HOOK -#endif - rjmp sofError -foundK: ;[-12] -;{3, 5} after falling D- edge, average delay: 4 cycles [we want 5 for center sampling] -;we have 1 bit time for setup purposes, then sample again. Numbers in brackets -;are cycles from center of first sync (double K) bit after the instruction - push r0 ;[-12] -; [---] ;[-11] - push YH ;[-10] -; [---] ;[-9] - lds YL, usbInputBufOffset;[-8] -; [---] ;[-7] - clr YH ;[-6] - subi YL, lo8(-(usbRxBuf));[-5] [rx loop init] - sbci YH, hi8(-(usbRxBuf));[-4] [rx loop init] - mov r0, x2 ;[-3] [rx loop init] - sbis USBIN, USBMINUS ;[-2] we want two bits K (sample 2 cycles too early) - rjmp haveTwoBitsK ;[-1] - pop YH ;[0] undo the pushes from before - pop r0 ;[2] - rjmp waitForK ;[4] this was not the end of sync, retry -; The entire loop from waitForK until rjmp waitForK above must not exceed two -; bit times (= 22 cycles). - -;---------------------------------------------------------------------------- -; push more registers and initialize values while we sample the first bits: -;---------------------------------------------------------------------------- -haveTwoBitsK: ;[1] - push shift ;[1] - push x1 ;[3] - push x2 ;[5] - push x3 ;[7] - ldi shift, 0xff ;[9] [rx loop init] - ori x3, 0xff ;[10] [rx loop init] == ser x3, clear zero flag - - in x1, USBIN ;[11] <-- sample bit 0 - bst x1, USBMINUS ;[12] - bld shift, 0 ;[13] - push x4 ;[14] == phase -; [---] ;[15] - push cnt ;[16] -; [---] ;[17] - ldi phase, 0 ;[18] [rx loop init] - ldi cnt, USB_BUFSIZE;[19] [rx loop init] - rjmp rxbit1 ;[20] -; [---] ;[21] - -;---------------------------------------------------------------------------- -; Receiver loop (numbers in brackets are cycles within byte after instr) -;---------------------------------------------------------------------------- -/* -byte oriented operations done during loop: -bit 0: store data -bit 1: SE0 check -bit 2: overflow check -bit 3: catch up -bit 4: rjmp to achieve conditional jump range -bit 5: PLL -bit 6: catch up -bit 7: jump, fixup bitstuff -; 87 [+ 2] cycles ------------------------------------------------------------------- -*/ -continueWithBit5: - in x2, USBIN ;[055] <-- bit 5 - eor r0, x2 ;[056] - or phase, r0 ;[057] - sbrc phase, USBMINUS ;[058] - lpm ;[059] optional nop3; modifies r0 - in phase, USBIN ;[060] <-- phase - eor x1, x2 ;[061] - bst x1, USBMINUS ;[062] - bld shift, 5 ;[063] - andi shift, 0x3f ;[064] - in x1, USBIN ;[065] <-- bit 6 - breq unstuff5 ;[066] *** unstuff escape - eor phase, x1 ;[067] - eor x2, x1 ;[068] - bst x2, USBMINUS ;[069] - bld shift, 6 ;[070] -didUnstuff6: ;[ ] - in r0, USBIN ;[071] <-- phase - cpi shift, 0x02 ;[072] - brlo unstuff6 ;[073] *** unstuff escape -didUnstuff5: ;[ ] - nop2 ;[074] -; [---] ;[075] - in x2, USBIN ;[076] <-- bit 7 - eor x1, x2 ;[077] - bst x1, USBMINUS ;[078] - bld shift, 7 ;[079] -didUnstuff7: ;[ ] - eor r0, x2 ;[080] - or phase, r0 ;[081] - in r0, USBIN ;[082] <-- phase - cpi shift, 0x04 ;[083] - brsh rxLoop ;[084] -; [---] ;[085] -unstuff7: ;[ ] - andi x3, ~0x80 ;[085] - ori shift, 0x80 ;[086] - in x2, USBIN ;[087] <-- sample stuffed bit 7 - nop ;[088] - rjmp didUnstuff7 ;[089] -; [---] ;[090] - ;[080] - -unstuff5: ;[067] - eor phase, x1 ;[068] - andi x3, ~0x20 ;[069] - ori shift, 0x20 ;[070] - in r0, USBIN ;[071] <-- phase - mov x2, x1 ;[072] - nop ;[073] - nop2 ;[074] -; [---] ;[075] - in x1, USBIN ;[076] <-- bit 6 - eor r0, x1 ;[077] - or phase, r0 ;[078] - eor x2, x1 ;[079] - bst x2, USBMINUS ;[080] - bld shift, 6 ;[081] no need to check bitstuffing, we just had one - in r0, USBIN ;[082] <-- phase - rjmp didUnstuff5 ;[083] -; [---] ;[084] - ;[074] - -unstuff6: ;[074] - andi x3, ~0x40 ;[075] - in x1, USBIN ;[076] <-- bit 6 again - ori shift, 0x40 ;[077] - nop2 ;[078] -; [---] ;[079] - rjmp didUnstuff6 ;[080] -; [---] ;[081] - ;[071] - -unstuff0: ;[013] - eor r0, x2 ;[014] - or phase, r0 ;[015] - andi x2, USBMASK ;[016] check for SE0 - in r0, USBIN ;[017] <-- phase - breq didUnstuff0 ;[018] direct jump to se0 would be too long - andi x3, ~0x01 ;[019] - ori shift, 0x01 ;[020] - mov x1, x2 ;[021] mov existing sample - in x2, USBIN ;[022] <-- bit 1 again - rjmp didUnstuff0 ;[023] -; [---] ;[024] - ;[014] - -unstuff1: ;[024] - eor r0, x1 ;[025] - or phase, r0 ;[026] - andi x3, ~0x02 ;[027] - in r0, USBIN ;[028] <-- phase - ori shift, 0x02 ;[029] - mov x2, x1 ;[030] - rjmp didUnstuff1 ;[031] -; [---] ;[032] - ;[022] - -unstuff2: ;[035] - eor r0, x2 ;[036] - or phase, r0 ;[037] - andi x3, ~0x04 ;[038] - in r0, USBIN ;[039] <-- phase - ori shift, 0x04 ;[040] - mov x1, x2 ;[041] - rjmp didUnstuff2 ;[042] -; [---] ;[043] - ;[033] - -unstuff3: ;[043] - in x2, USBIN ;[044] <-- bit 3 again - eor r0, x2 ;[045] - or phase, r0 ;[046] - andi x3, ~0x08 ;[047] - ori shift, 0x08 ;[048] - nop ;[049] - in r0, USBIN ;[050] <-- phase - rjmp didUnstuff3 ;[051] -; [---] ;[052] - ;[042] - -unstuff4: ;[053] - andi x3, ~0x10 ;[054] - in x1, USBIN ;[055] <-- bit 4 again - ori shift, 0x10 ;[056] - rjmp didUnstuff4 ;[057] -; [---] ;[058] - ;[048] - -rxLoop: ;[085] - eor x3, shift ;[086] reconstruct: x3 is 0 at bit locations we changed, 1 at others - in x1, USBIN ;[000] <-- bit 0 - st y+, x3 ;[001] -; [---] ;[002] - eor r0, x1 ;[003] - or phase, r0 ;[004] - eor x2, x1 ;[005] - in r0, USBIN ;[006] <-- phase - ser x3 ;[007] - bst x2, USBMINUS ;[008] - bld shift, 0 ;[009] - andi shift, 0xf9 ;[010] -rxbit1: ;[ ] - in x2, USBIN ;[011] <-- bit 1 - breq unstuff0 ;[012] *** unstuff escape - andi x2, USBMASK ;[013] SE0 check for bit 1 -didUnstuff0: ;[ ] Z only set if we detected SE0 in bitstuff - breq se0 ;[014] - eor r0, x2 ;[015] - or phase, r0 ;[016] - in r0, USBIN ;[017] <-- phase - eor x1, x2 ;[018] - bst x1, USBMINUS ;[019] - bld shift, 1 ;[020] - andi shift, 0xf3 ;[021] -didUnstuff1: ;[ ] - in x1, USBIN ;[022] <-- bit 2 - breq unstuff1 ;[023] *** unstuff escape - eor r0, x1 ;[024] - or phase, r0 ;[025] - subi cnt, 1 ;[026] overflow check - brcs overflow ;[027] - in r0, USBIN ;[028] <-- phase - eor x2, x1 ;[029] - bst x2, USBMINUS ;[030] - bld shift, 2 ;[031] - andi shift, 0xe7 ;[032] -didUnstuff2: ;[ ] - in x2, USBIN ;[033] <-- bit 3 - breq unstuff2 ;[034] *** unstuff escape - eor r0, x2 ;[035] - or phase, r0 ;[036] - eor x1, x2 ;[037] - bst x1, USBMINUS ;[038] - in r0, USBIN ;[039] <-- phase - bld shift, 3 ;[040] - andi shift, 0xcf ;[041] -didUnstuff3: ;[ ] - breq unstuff3 ;[042] *** unstuff escape - nop ;[043] - in x1, USBIN ;[044] <-- bit 4 - eor x2, x1 ;[045] - bst x2, USBMINUS ;[046] - bld shift, 4 ;[047] -didUnstuff4: ;[ ] - eor r0, x1 ;[048] - or phase, r0 ;[049] - in r0, USBIN ;[050] <-- phase - andi shift, 0x9f ;[051] - breq unstuff4 ;[052] *** unstuff escape - rjmp continueWithBit5;[053] -; [---] ;[054] - -macro POP_STANDARD ; 16 cycles - pop cnt - pop x4 - pop x3 - pop x2 - pop x1 - pop shift - pop YH - pop r0 - endm -macro POP_RETI ; 5 cycles - pop YL - out SREG, YL - pop YL - endm - -#include "asmcommon.inc" - - -; USB spec says: -; idle = J -; J = (D+ = 0), (D- = 1) -; K = (D+ = 1), (D- = 0) -; Spec allows 7.5 bit times from EOP to SOP for replies - -bitstuff7: - eor x1, x4 ;[4] - ldi x2, 0 ;[5] - nop2 ;[6] C is zero (brcc) - rjmp didStuff7 ;[8] - -bitstuffN: - eor x1, x4 ;[5] - ldi x2, 0 ;[6] - lpm ;[7] 3 cycle NOP, modifies r0 - out USBOUT, x1 ;[10] <-- out - rjmp didStuffN ;[0] - -#define bitStatus x3 - -sendNakAndReti: - ldi cnt, USBPID_NAK ;[-19] - rjmp sendCntAndReti ;[-18] -sendAckAndReti: - ldi cnt, USBPID_ACK ;[-17] -sendCntAndReti: - mov r0, cnt ;[-16] - ldi YL, 0 ;[-15] R0 address is 0 - ldi YH, 0 ;[-14] - ldi cnt, 2 ;[-13] -; rjmp usbSendAndReti fallthrough - -;usbSend: -;pointer to data in 'Y' -;number of bytes in 'cnt' -- including sync byte [range 2 ... 12] -;uses: x1...x4, shift, cnt, Y -;Numbers in brackets are time since first bit of sync pattern is sent -usbSendAndReti: ; 12 cycles until SOP - in x2, USBDDR ;[-12] - ori x2, USBMASK ;[-11] - sbi USBOUT, USBMINUS;[-10] prepare idle state; D+ and D- must have been 0 (no pullups) - in x1, USBOUT ;[-8] port mirror for tx loop - out USBDDR, x2 ;[-7] <- acquire bus -; need not init x2 (bitstuff history) because sync starts with 0 - ldi x4, USBMASK ;[-6] exor mask - ldi shift, 0x80 ;[-5] sync byte is first byte sent - ldi bitStatus, 0xff ;[-4] init bit loop counter, works for up to 12 bytes -byteloop: -bitloop: - sbrs shift, 0 ;[8] [-3] - eor x1, x4 ;[9] [-2] - out USBOUT, x1 ;[10] [-1] <-- out - ror shift ;[0] - ror x2 ;[1] -didStuffN: - cpi x2, 0xfc ;[2] - brcc bitstuffN ;[3] - nop ;[4] - subi bitStatus, 37 ;[5] 256 / 7 ~=~ 37 - brcc bitloop ;[6] when we leave the loop, bitStatus has almost the initial value - sbrs shift, 0 ;[7] - eor x1, x4 ;[8] - ror shift ;[9] -didStuff7: - out USBOUT, x1 ;[10] <-- out - ror x2 ;[0] - cpi x2, 0xfc ;[1] - brcc bitstuff7 ;[2] - ld shift, y+ ;[3] - dec cnt ;[5] - brne byteloop ;[6] -;make SE0: - cbr x1, USBMASK ;[7] prepare SE0 [spec says EOP may be 21 to 25 cycles] - lds x2, usbNewDeviceAddr;[8] - lsl x2 ;[10] we compare with left shifted address - out USBOUT, x1 ;[11] <-- out SE0 -- from now 2 bits = 22 cycles until bus idle -;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm: -;set address only after data packet was sent, not after handshake - subi YL, 2 ;[0] Only assign address on data packets, not ACK/NAK in r0 - sbci YH, 0 ;[1] - breq skipAddrAssign ;[2] - sts usbDeviceAddr, x2; if not skipped: SE0 is one cycle longer -skipAddrAssign: -;end of usbDeviceAddress transfer - ldi x2, 1<<USB_INTR_PENDING_BIT;[4] int0 occurred during TX -- clear pending flag - USB_STORE_PENDING(x2) ;[5] - ori x1, USBIDLE ;[6] - in x2, USBDDR ;[7] - cbr x2, USBMASK ;[8] set both pins to input - mov x3, x1 ;[9] - cbr x3, USBMASK ;[10] configure no pullup on both pins - ldi x4, 4 ;[11] -se0Delay: - dec x4 ;[12] [15] [18] [21] - brne se0Delay ;[13] [16] [19] [22] - out USBOUT, x1 ;[23] <-- out J (idle) -- end of SE0 (EOP signal) - out USBDDR, x2 ;[24] <-- release bus now - out USBOUT, x3 ;[25] <-- ensure no pull-up resistors are active - rjmp doReturn - diff --git a/tmk_core/protocol/vusb/usbdrv/usbdrvasm18-crc.inc b/tmk_core/protocol/vusb/usbdrv/usbdrvasm18-crc.inc deleted file mode 100644 index f83347df7f..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/usbdrvasm18-crc.inc +++ /dev/null @@ -1,707 +0,0 @@ -/* Name: usbdrvasm18.inc - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Lukas Schrittwieser (based on 20 MHz usbdrvasm20.inc by Jeroen Benschop) - * Creation Date: 2009-01-20 - * Tabsize: 4 - * Copyright: (c) 2008 by Lukas Schrittwieser and OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * Revision: $Id: usbdrvasm18-crc.inc 740 2009-04-13 18:23:31Z cs $ - */ - -/* Do not link this file! Link usbdrvasm.S instead, which includes the - * appropriate implementation! - */ - -/* -General Description: -This file is the 18 MHz version of the asssembler part of the USB driver. It -requires a 18 MHz crystal (not a ceramic resonator and not a calibrated RC -oscillator). - -See usbdrv.h for a description of the entire driver. - -Since almost all of this code is timing critical, don't change unless you -really know what you are doing! Many parts require not only a maximum number -of CPU cycles, but even an exact number of cycles! -*/ - - -;max stack usage: [ret(2), YL, SREG, YH, [sofError], bitcnt(x5), shift, x1, x2, x3, x4, cnt, ZL, ZH] = 14 bytes -;nominal frequency: 18 MHz -> 12 cycles per bit -; Numbers in brackets are clocks counted from center of last sync bit -; when instruction starts -;register use in receive loop to receive the data bytes: -; shift assembles the byte currently being received -; x1 holds the D+ and D- line state -; x2 holds the previous line state -; cnt holds the number of bytes left in the receive buffer -; x3 holds the higher crc byte (see algorithm below) -; x4 is used as temporary register for the crc algorithm -; x5 is used for unstuffing: when unstuffing the last received bit is inverted in shift (to prevent further -; unstuffing calls. In the same time the corresponding bit in x5 is cleared to mark the bit as beening iverted -; zl lower crc value and crc table index -; zh used for crc table accesses - -;-------------------------------------------------------------------------------------------------------------- -; CRC mods: -; table driven crc checker, Z points to table in prog space -; ZL is the lower crc byte, x3 is the higher crc byte -; x4 is used as temp register to store different results -; the initialization of the crc register is not 0xFFFF but 0xFE54. This is because during the receipt of the -; first data byte an virtual zero data byte is added to the crc register, this results in the correct initial -; value of 0xFFFF at beginning of the second data byte before the first data byte is added to the crc. -; The magic number 0xFE54 results form the crc table: At tabH[0x54] = 0xFF = crcH (required) and -; tabL[0x54] = 0x01 -> crcL = 0x01 xor 0xFE = 0xFF -; bitcnt is renamed to x5 and is used for unstuffing purposes, the unstuffing works like in the 12MHz version -;-------------------------------------------------------------------------------------------------------------- -; CRC algorithm: -; The crc register is formed by x3 (higher byte) and ZL (lower byte). The algorithm uses a 'reversed' form -; i.e. that it takes the least significant bit first and shifts to the right. So in fact the highest order -; bit seen from the polynomial devision point of view is the lsb of ZL. (If this sounds strange to you i -; propose a research on CRC :-) ) -; Each data byte received is xored to ZL, the lower crc byte. This byte now builds the crc -; table index. Next the new high byte is loaded from the table and stored in x4 until we have space in x3 -; (its destination). -; Afterwards the lower table is loaded from the table and stored in ZL (the old index is overwritten as -; we don't need it anymore. In fact this is a right shift by 8 bits.) Now the old crc high value is xored -; to ZL, this is the second shift of the old crc value. Now x4 (the temp reg) is moved to x3 and the crc -; calculation is done. -; Prior to the first byte the two CRC register have to be initialized to 0xFFFF (as defined in usb spec) -; however the crc engine also runs during the receipt of the first byte, therefore x3 and zl are initialized -; to a magic number which results in a crc value of 0xFFFF after the first complete byte. -; -; This algorithm is split into the extra cycles of the different bits: -; bit7: XOR the received byte to ZL -; bit5: load the new high byte to x4 -; bit6: load the lower xor byte from the table, xor zl and x3, store result in zl (=the new crc low value) -; move x4 (the new high byte) to x3, the crc value is ready -; - - -macro POP_STANDARD ; 18 cycles - pop ZH - pop ZL - pop cnt - pop x5 - pop x3 - pop x2 - pop x1 - pop shift - pop x4 - endm -macro POP_RETI ; 7 cycles - pop YH - pop YL - out SREG, YL - pop YL - endm - -macro CRC_CLEANUP_AND_CHECK - ; the last byte has already been xored with the lower crc byte, we have to do the table lookup and xor - ; x3 is the higher crc byte, zl the lower one - ldi ZH, hi8(usbCrcTableHigh);[+1] get the new high byte from the table - lpm x2, Z ;[+2][+3][+4] - ldi ZH, hi8(usbCrcTableLow);[+5] get the new low xor byte from the table - lpm ZL, Z ;[+6][+7][+8] - eor ZL, x3 ;[+7] xor the old high byte with the value from the table, x2:ZL now holds the crc value - cpi ZL, 0x01 ;[+8] if the crc is ok we have a fixed remainder value of 0xb001 in x2:ZL (see usb spec) - brne ignorePacket ;[+9] detected a crc fault -> paket is ignored and retransmitted by the host - cpi x2, 0xb0 ;[+10] - brne ignorePacket ;[+11] detected a crc fault -> paket is ignored and retransmitted by the host - endm - - -USB_INTR_VECTOR: -;order of registers pushed: YL, SREG, YH, [sofError], x4, shift, x1, x2, x3, x5, cnt, ZL, ZH - push YL ;[-28] push only what is necessary to sync with edge ASAP - in YL, SREG ;[-26] - push YL ;[-25] - push YH ;[-23] -;---------------------------------------------------------------------------- -; Synchronize with sync pattern: -;---------------------------------------------------------------------------- -;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K] -;sync up with J to K edge during sync pattern -- use fastest possible loops -;The first part waits at most 1 bit long since we must be in sync pattern. -;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to -;waitForJ, ensure that this prerequisite is met. -waitForJ: - inc YL - sbis USBIN, USBMINUS - brne waitForJ ; just make sure we have ANY timeout -waitForK: -;The following code results in a sampling window of < 1/4 bit which meets the spec. - sbis USBIN, USBMINUS ;[-17] - rjmp foundK ;[-16] - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK -#if USB_COUNT_SOF - lds YL, usbSofCount - inc YL - sts usbSofCount, YL -#endif /* USB_COUNT_SOF */ -#ifdef USB_SOF_HOOK - USB_SOF_HOOK -#endif - rjmp sofError -foundK: ;[-15] -;{3, 5} after falling D- edge, average delay: 4 cycles -;bit0 should be at 30 (2.5 bits) for center sampling. Currently at 4 so 26 cylces till bit 0 sample -;use 1 bit time for setup purposes, then sample again. Numbers in brackets -;are cycles from center of first sync (double K) bit after the instruction - push x4 ;[-14] -; [---] ;[-13] - lds YL, usbInputBufOffset;[-12] used to toggle the two usb receive buffers -; [---] ;[-11] - clr YH ;[-10] - subi YL, lo8(-(usbRxBuf));[-9] [rx loop init] - sbci YH, hi8(-(usbRxBuf));[-8] [rx loop init] - push shift ;[-7] -; [---] ;[-6] - ldi shift, 0x80 ;[-5] the last bit is the end of byte marker for the pid receiver loop - clc ;[-4] the carry has to be clear for receipt of pid bit 0 - sbis USBIN, USBMINUS ;[-3] we want two bits K (sample 3 cycles too early) - rjmp haveTwoBitsK ;[-2] - pop shift ;[-1] undo the push from before - pop x4 ;[1] - rjmp waitForK ;[3] this was not the end of sync, retry -; The entire loop from waitForK until rjmp waitForK above must not exceed two -; bit times (= 24 cycles). - -;---------------------------------------------------------------------------- -; push more registers and initialize values while we sample the first bits: -;---------------------------------------------------------------------------- -haveTwoBitsK: - push x1 ;[0] - push x2 ;[2] - push x3 ;[4] crc high byte - ldi x2, 1<<USBPLUS ;[6] [rx loop init] current line state is K state. D+=="1", D-=="0" - push x5 ;[7] - push cnt ;[9] - ldi cnt, USB_BUFSIZE ;[11] - - -;-------------------------------------------------------------------------------------------------------------- -; receives the pid byte -; there is no real unstuffing algorithm implemented here as a stuffing bit is impossible in the pid byte. -; That's because the last four bits of the byte are the inverted of the first four bits. If we detect a -; unstuffing condition something went wrong and abort -; shift has to be initialized to 0x80 -;-------------------------------------------------------------------------------------------------------------- - -; pid bit 0 - used for even more register saving (we need the z pointer) - in x1, USBIN ;[0] sample line state - andi x1, USBMASK ;[1] filter only D+ and D- bits - eor x2, x1 ;[2] generate inverted of actual bit - sbrc x2, USBMINUS ;[3] if the bit is set we received a zero - sec ;[4] - ror shift ;[5] we perform no unstuffing check here as this is the first bit - mov x2, x1 ;[6] - push ZL ;[7] - ;[8] - push ZH ;[9] - ;[10] - ldi x3, 0xFE ;[11] x3 is the high order crc value - - -bitloopPid: - in x1, USBIN ;[0] sample line state - andi x1, USBMASK ;[1] filter only D+ and D- bits - breq nse0 ;[2] both lines are low so handle se0 - eor x2, x1 ;[3] generate inverted of actual bit - sbrc x2, USBMINUS ;[4] set the carry if we received a zero - sec ;[5] - ror shift ;[6] - ldi ZL, 0x54 ;[7] ZL is the low order crc value - ser x4 ;[8] the is no bit stuffing check here as the pid bit can't be stuffed. if so - ; some error occured. In this case the paket is discarded later on anyway. - mov x2, x1 ;[9] prepare for the next cycle - brcc bitloopPid ;[10] while 0s drop out of shift we get the next bit - eor x4, shift ;[11] invert all bits in shift and store result in x4 - -;-------------------------------------------------------------------------------------------------------------- -; receives data bytes and calculates the crc -; the last USBIN state has to be in x2 -; this is only the first half, due to branch distanc limitations the second half of the loop is near the end -; of this asm file -;-------------------------------------------------------------------------------------------------------------- - -rxDataStart: - in x1, USBIN ;[0] sample line state (note: a se0 check is not useful due to bit dribbling) - ser x5 ;[1] prepare the unstuff marker register - eor x2, x1 ;[2] generates the inverted of the actual bit - bst x2, USBMINUS ;[3] copy the bit from x2 - bld shift, 0 ;[4] and store it in shift - mov x2, shift ;[5] make a copy of shift for unstuffing check - andi x2, 0xF9 ;[6] mask the last six bits, if we got six zeros (which are six ones in fact) - breq unstuff0 ;[7] then Z is set now and we branch to the unstuffing handler -didunstuff0: - subi cnt, 1 ;[8] cannot use dec because it doesn't affect the carry flag - brcs nOverflow ;[9] Too many bytes received. Ignore packet - st Y+, x4 ;[10] store the last received byte - ;[11] st needs two cycles - -; bit1 - in x2, USBIN ;[0] sample line state - andi x1, USBMASK ;[1] check for se0 during bit 0 - breq nse0 ;[2] - andi x2, USBMASK ;[3] check se0 during bit 1 - breq nse0 ;[4] - eor x1, x2 ;[5] - bst x1, USBMINUS ;[6] - bld shift, 1 ;[7] - mov x1, shift ;[8] - andi x1, 0xF3 ;[9] - breq unstuff1 ;[10] -didunstuff1: - nop ;[11] - -; bit2 - in x1, USBIN ;[0] sample line state - andi x1, USBMASK ;[1] check for se0 (as there is nothing else to do here - breq nOverflow ;[2] - eor x2, x1 ;[3] generates the inverted of the actual bit - bst x2, USBMINUS ;[4] - bld shift, 2 ;[5] store the bit - mov x2, shift ;[6] - andi x2, 0xE7 ;[7] if we have six zeros here (which means six 1 in the stream) - breq unstuff2 ;[8] the next bit is a stuffing bit -didunstuff2: - nop2 ;[9] - ;[10] - nop ;[11] - -; bit3 - in x2, USBIN ;[0] sample line state - andi x2, USBMASK ;[1] check for se0 - breq nOverflow ;[2] - eor x1, x2 ;[3] - bst x1, USBMINUS ;[4] - bld shift, 3 ;[5] - mov x1, shift ;[6] - andi x1, 0xCF ;[7] - breq unstuff3 ;[8] -didunstuff3: - nop ;[9] - rjmp rxDataBit4 ;[10] - ;[11] - -; the avr branch instructions allow an offset of +63 insturction only, so we need this -; 'local copy' of se0 -nse0: - rjmp se0 ;[4] - ;[5] -; the same same as for se0 is needed for overflow and StuffErr -nOverflow: -stuffErr: - rjmp overflow - - -unstuff0: ;[8] this is the branch delay of breq unstuffX - andi x1, USBMASK ;[9] do an se0 check here (if the last crc byte ends with 5 one's we might end up here - breq didunstuff0 ;[10] event tough the message is complete -> jump back and store the byte - ori shift, 0x01 ;[11] invert the last received bit to prevent furhter unstuffing - in x2, USBIN ;[0] we have some free cycles so we could check for bit stuffing errors - andi x5, 0xFE ;[1] mark this bit as inverted (will be corrected before storing shift) - eor x1, x2 ;[2] x1 and x2 have to be different because the stuff bit is always a zero - andi x1, USBMASK ;[3] mask the interesting bits - breq stuffErr ;[4] if the stuff bit is a 1-bit something went wrong - mov x1, x2 ;[5] the next bit expects the last state to be in x1 - rjmp didunstuff0 ;[6] - ;[7] jump delay of rjmp didunstuffX - -unstuff1: ;[11] this is the jump delay of breq unstuffX - in x1, USBIN ;[0] we have some free cycles so we could check for bit stuffing errors - ori shift, 0x02 ;[1] invert the last received bit to prevent furhter unstuffing - andi x5, 0xFD ;[2] mark this bit as inverted (will be corrected before storing shift) - eor x2, x1 ;[3] x1 and x2 have to be different because the stuff bit is always a zero - andi x2, USBMASK ;[4] mask the interesting bits - breq stuffErr ;[5] if the stuff bit is a 1-bit something went wrong - mov x2, x1 ;[6] the next bit expects the last state to be in x2 - nop2 ;[7] - ;[8] - rjmp didunstuff1 ;[9] - ;[10] jump delay of rjmp didunstuffX - -unstuff2: ;[9] this is the jump delay of breq unstuffX - ori shift, 0x04 ;[10] invert the last received bit to prevent furhter unstuffing - andi x5, 0xFB ;[11] mark this bit as inverted (will be corrected before storing shift) - in x2, USBIN ;[0] we have some free cycles so we could check for bit stuffing errors - eor x1, x2 ;[1] x1 and x2 have to be different because the stuff bit is always a zero - andi x1, USBMASK ;[2] mask the interesting bits - breq stuffErr ;[3] if the stuff bit is a 1-bit something went wrong - mov x1, x2 ;[4] the next bit expects the last state to be in x1 - nop2 ;[5] - ;[6] - rjmp didunstuff2 ;[7] - ;[8] jump delay of rjmp didunstuffX - -unstuff3: ;[9] this is the jump delay of breq unstuffX - ori shift, 0x08 ;[10] invert the last received bit to prevent furhter unstuffing - andi x5, 0xF7 ;[11] mark this bit as inverted (will be corrected before storing shift) - in x1, USBIN ;[0] we have some free cycles so we could check for bit stuffing errors - eor x2, x1 ;[1] x1 and x2 have to be different because the stuff bit is always a zero - andi x2, USBMASK ;[2] mask the interesting bits - breq stuffErr ;[3] if the stuff bit is a 1-bit something went wrong - mov x2, x1 ;[4] the next bit expects the last state to be in x2 - nop2 ;[5] - ;[6] - rjmp didunstuff3 ;[7] - ;[8] jump delay of rjmp didunstuffX - - - -; the include has to be here due to branch distance restirctions -#define __USE_CRC__ -#include "asmcommon.inc" - - - -; USB spec says: -; idle = J -; J = (D+ = 0), (D- = 1) -; K = (D+ = 1), (D- = 0) -; Spec allows 7.5 bit times from EOP to SOP for replies -; 7.5 bit times is 90 cycles. ...there is plenty of time - - -sendNakAndReti: - ldi x3, USBPID_NAK ;[-18] - rjmp sendX3AndReti ;[-17] -sendAckAndReti: - ldi cnt, USBPID_ACK ;[-17] -sendCntAndReti: - mov x3, cnt ;[-16] -sendX3AndReti: - ldi YL, 20 ;[-15] x3==r20 address is 20 - ldi YH, 0 ;[-14] - ldi cnt, 2 ;[-13] -; rjmp usbSendAndReti fallthrough - -;usbSend: -;pointer to data in 'Y' -;number of bytes in 'cnt' -- including sync byte [range 2 ... 12] -;uses: x1...x4, btcnt, shift, cnt, Y -;Numbers in brackets are time since first bit of sync pattern is sent - -usbSendAndReti: ; 12 cycles until SOP - in x2, USBDDR ;[-12] - ori x2, USBMASK ;[-11] - sbi USBOUT, USBMINUS;[-10] prepare idle state; D+ and D- must have been 0 (no pullups) - in x1, USBOUT ;[-8] port mirror for tx loop - out USBDDR, x2 ;[-6] <- acquire bus - ldi x2, 0 ;[-6] init x2 (bitstuff history) because sync starts with 0 - ldi x4, USBMASK ;[-5] exor mask - ldi shift, 0x80 ;[-4] sync byte is first byte sent -txByteLoop: - ldi bitcnt, 0x40 ;[-3]=[9] binary 01000000 -txBitLoop: ; the loop sends the first 7 bits of the byte - sbrs shift, 0 ;[-2]=[10] if we have to send a 1 don't change the line state - eor x1, x4 ;[-1]=[11] - out USBOUT, x1 ;[0] - ror shift ;[1] - ror x2 ;[2] transfers the last sent bit to the stuffing history -didStuffN: - nop ;[3] - nop ;[4] - cpi x2, 0xfc ;[5] if we sent six consecutive ones - brcc bitstuffN ;[6] - lsr bitcnt ;[7] - brne txBitLoop ;[8] restart the loop while the 1 is still in the bitcount - -; transmit bit 7 - sbrs shift, 0 ;[9] - eor x1, x4 ;[10] -didStuff7: - ror shift ;[11] - out USBOUT, x1 ;[0] transfer bit 7 to the pins - ror x2 ;[1] move the bit into the stuffing history - cpi x2, 0xfc ;[2] - brcc bitstuff7 ;[3] - ld shift, y+ ;[4] get next byte to transmit - dec cnt ;[5] decrement byte counter - brne txByteLoop ;[7] if we have more bytes start next one - ;[8] branch delay - -;make SE0: - cbr x1, USBMASK ;[8] prepare SE0 [spec says EOP may be 25 to 30 cycles] - lds x2, usbNewDeviceAddr;[9] - lsl x2 ;[11] we compare with left shifted address - out USBOUT, x1 ;[0] <-- out SE0 -- from now 2 bits = 24 cycles until bus idle - subi YL, 20 + 2 ;[1] Only assign address on data packets, not ACK/NAK in x3 - sbci YH, 0 ;[2] -;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm: -;set address only after data packet was sent, not after handshake - breq skipAddrAssign ;[3] - sts usbDeviceAddr, x2 ; if not skipped: SE0 is one cycle longer -skipAddrAssign: -;end of usbDeviceAddress transfer - ldi x2, 1<<USB_INTR_PENDING_BIT;[5] int0 occurred during TX -- clear pending flag - USB_STORE_PENDING(x2) ;[6] - ori x1, USBIDLE ;[7] - in x2, USBDDR ;[8] - cbr x2, USBMASK ;[9] set both pins to input - mov x3, x1 ;[10] - cbr x3, USBMASK ;[11] configure no pullup on both pins - ldi x4, 4 ;[12] -se0Delay: - dec x4 ;[13] [16] [19] [22] - brne se0Delay ;[14] [17] [20] [23] - out USBOUT, x1 ;[24] <-- out J (idle) -- end of SE0 (EOP signal) - out USBDDR, x2 ;[25] <-- release bus now - out USBOUT, x3 ;[26] <-- ensure no pull-up resistors are active - rjmp doReturn - -bitstuffN: - eor x1, x4 ;[8] generate a zero - ldi x2, 0 ;[9] reset the bit stuffing history - nop2 ;[10] - out USBOUT, x1 ;[0] <-- send the stuffing bit - rjmp didStuffN ;[1] - -bitstuff7: - eor x1, x4 ;[5] - ldi x2, 0 ;[6] reset bit stuffing history - clc ;[7] fill a zero into the shift register - rol shift ;[8] compensate for ror shift at branch destination - rjmp didStuff7 ;[9] - ;[10] jump delay - -;-------------------------------------------------------------------------------------------------------------- -; receives data bytes and calculates the crc -; second half of the data byte receiver loop -; most parts of the crc algorithm are here -;-------------------------------------------------------------------------------------------------------------- - -nOverflow2: - rjmp overflow - -rxDataBit4: - in x1, USBIN ;[0] sample line state - andi x1, USBMASK ;[1] check for se0 - breq nOverflow2 ;[2] - eor x2, x1 ;[3] - bst x2, USBMINUS ;[4] - bld shift, 4 ;[5] - mov x2, shift ;[6] - andi x2, 0x9F ;[7] - breq unstuff4 ;[8] -didunstuff4: - nop2 ;[9][10] - nop ;[11] - -; bit5 - in x2, USBIN ;[0] sample line state - ldi ZH, hi8(usbCrcTableHigh);[1] use the table for the higher byte - eor x1, x2 ;[2] - bst x1, USBMINUS ;[3] - bld shift, 5 ;[4] - mov x1, shift ;[5] - andi x1, 0x3F ;[6] - breq unstuff5 ;[7] -didunstuff5: - lpm x4, Z ;[8] load the higher crc xor-byte and store it for later use - ;[9] lpm needs 3 cycles - ;[10] - ldi ZH, hi8(usbCrcTableLow);[11] load the lower crc xor byte adress - -; bit6 - in x1, USBIN ;[0] sample line state - eor x2, x1 ;[1] - bst x2, USBMINUS ;[2] - bld shift, 6 ;[3] - mov x2, shift ;[4] - andi x2, 0x7E ;[5] - breq unstuff6 ;[6] -didunstuff6: - lpm ZL, Z ;[7] load the lower xor crc byte - ;[8] lpm needs 3 cycles - ;[9] - eor ZL, x3 ;[10] xor the old high crc byte with the low xor-byte - mov x3, x4 ;[11] move the new high order crc value from temp to its destination - -; bit7 - in x2, USBIN ;[0] sample line state - eor x1, x2 ;[1] - bst x1, USBMINUS ;[2] - bld shift, 7 ;[3] now shift holds the complete but inverted data byte - mov x1, shift ;[4] - andi x1, 0xFC ;[5] - breq unstuff7 ;[6] -didunstuff7: - eor x5, shift ;[7] x5 marks all bits which have not been inverted by the unstuffing subs - mov x4, x5 ;[8] keep a copy of the data byte it will be stored during next bit0 - eor ZL, x4 ;[9] feed the actual byte into the crc algorithm - rjmp rxDataStart ;[10] next byte - ;[11] during the reception of the next byte this one will be fed int the crc algorithm - -unstuff4: ;[9] this is the jump delay of rjmp unstuffX - ori shift, 0x10 ;[10] invert the last received bit to prevent furhter unstuffing - andi x5, 0xEF ;[11] mark this bit as inverted (will be corrected before storing shift) - in x2, USBIN ;[0] we have some free cycles so we could check for bit stuffing errors - eor x1, x2 ;[1] x1 and x2 have to be different because the stuff bit is always a zero - andi x1, USBMASK ;[2] mask the interesting bits - breq stuffErr2 ;[3] if the stuff bit is a 1-bit something went wrong - mov x1, x2 ;[4] the next bit expects the last state to be in x1 - nop2 ;[5] - ;[6] - rjmp didunstuff4 ;[7] - ;[8] jump delay of rjmp didunstuffX - -unstuff5: ;[8] this is the jump delay of rjmp unstuffX - nop ;[9] - ori shift, 0x20 ;[10] invert the last received bit to prevent furhter unstuffing - andi x5, 0xDF ;[11] mark this bit as inverted (will be corrected before storing shift) - in x1, USBIN ;[0] we have some free cycles so we could check for bit stuffing errors - eor x2, x1 ;[1] x1 and x2 have to be different because the stuff bit is always a zero - andi x2, USBMASK ;[2] mask the interesting bits - breq stuffErr2 ;[3] if the stuff bit is a 1-bit something went wrong - mov x2, x1 ;[4] the next bit expects the last state to be in x2 - nop ;[5] - rjmp didunstuff5 ;[6] - ;[7] jump delay of rjmp didunstuffX - -unstuff6: ;[7] this is the jump delay of rjmp unstuffX - nop2 ;[8] - ;[9] - ori shift, 0x40 ;[10] invert the last received bit to prevent furhter unstuffing - andi x5, 0xBF ;[11] mark this bit as inverted (will be corrected before storing shift) - in x2, USBIN ;[0] we have some free cycles so we could check for bit stuffing errors - eor x1, x2 ;[1] x1 and x2 have to be different because the stuff bit is always a zero - andi x1, USBMASK ;[2] mask the interesting bits - breq stuffErr2 ;[3] if the stuff bit is a 1-bit something went wrong - mov x1, x2 ;[4] the next bit expects the last state to be in x1 - rjmp didunstuff6 ;[5] - ;[6] jump delay of rjmp didunstuffX - -unstuff7: ;[7] this is the jump delay of rjmp unstuffX - nop ;[8] - nop ;[9] - ori shift, 0x80 ;[10] invert the last received bit to prevent furhter unstuffing - andi x5, 0x7F ;[11] mark this bit as inverted (will be corrected before storing shift) - in x1, USBIN ;[0] we have some free cycles so we could check for bit stuffing errors - eor x2, x1 ;[1] x1 and x2 have to be different because the stuff bit is always a zero - andi x2, USBMASK ;[2] mask the interesting bits - breq stuffErr2 ;[3] if the stuff bit is a 1-bit something went wrong - mov x2, x1 ;[4] the next bit expects the last state to be in x2 - rjmp didunstuff7 ;[5] - ;[6] jump delay of rjmp didunstuff7 - -; local copy of the stuffErr desitnation for the second half of the receiver loop -stuffErr2: - rjmp stuffErr - -;-------------------------------------------------------------------------------------------------------------- -; The crc table follows. It has to be aligned to enable a fast loading of the needed bytes. -; There are two tables of 256 entries each, the low and the high byte table. -; Table values were generated with the following C code: -/* -#include <stdio.h> -int main (int argc, char **argv) -{ - int i, j; - for (i=0; i<512; i++){ - unsigned short crc = i & 0xff; - for(j=0; j<8; j++) crc = (crc >> 1) ^ ((crc & 1) ? 0xa001 : 0); - if((i & 7) == 0) printf("\n.byte "); - printf("0x%02x, ", (i > 0xff ? (crc >> 8) : crc) & 0xff); - if(i == 255) printf("\n"); - } - return 0; -} - -// Use the following algorithm to compute CRC values: -ushort computeCrc(uchar *msg, uchar msgLen) -{ - uchar i; - ushort crc = 0xffff; - for(i = 0; i < msgLen; i++) - crc = usbCrcTable16[lo8(crc) ^ msg[i]] ^ hi8(crc); - return crc; -} -*/ - -.balign 256 -usbCrcTableLow: -.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 -.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 -.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 -.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 -.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 -.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 -.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 -.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 -.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 -.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 -.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 -.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 -.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 -.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 -.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 -.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 -.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 -.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 -.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 -.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 -.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 -.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 -.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 -.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 -.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 -.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 -.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 -.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 -.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 -.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 -.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 -.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 - -; .balign 256 -usbCrcTableHigh: -.byte 0x00, 0xC0, 0xC1, 0x01, 0xC3, 0x03, 0x02, 0xC2 -.byte 0xC6, 0x06, 0x07, 0xC7, 0x05, 0xC5, 0xC4, 0x04 -.byte 0xCC, 0x0C, 0x0D, 0xCD, 0x0F, 0xCF, 0xCE, 0x0E -.byte 0x0A, 0xCA, 0xCB, 0x0B, 0xC9, 0x09, 0x08, 0xC8 -.byte 0xD8, 0x18, 0x19, 0xD9, 0x1B, 0xDB, 0xDA, 0x1A -.byte 0x1E, 0xDE, 0xDF, 0x1F, 0xDD, 0x1D, 0x1C, 0xDC -.byte 0x14, 0xD4, 0xD5, 0x15, 0xD7, 0x17, 0x16, 0xD6 -.byte 0xD2, 0x12, 0x13, 0xD3, 0x11, 0xD1, 0xD0, 0x10 -.byte 0xF0, 0x30, 0x31, 0xF1, 0x33, 0xF3, 0xF2, 0x32 -.byte 0x36, 0xF6, 0xF7, 0x37, 0xF5, 0x35, 0x34, 0xF4 -.byte 0x3C, 0xFC, 0xFD, 0x3D, 0xFF, 0x3F, 0x3E, 0xFE -.byte 0xFA, 0x3A, 0x3B, 0xFB, 0x39, 0xF9, 0xF8, 0x38 -.byte 0x28, 0xE8, 0xE9, 0x29, 0xEB, 0x2B, 0x2A, 0xEA -.byte 0xEE, 0x2E, 0x2F, 0xEF, 0x2D, 0xED, 0xEC, 0x2C -.byte 0xE4, 0x24, 0x25, 0xE5, 0x27, 0xE7, 0xE6, 0x26 -.byte 0x22, 0xE2, 0xE3, 0x23, 0xE1, 0x21, 0x20, 0xE0 -.byte 0xA0, 0x60, 0x61, 0xA1, 0x63, 0xA3, 0xA2, 0x62 -.byte 0x66, 0xA6, 0xA7, 0x67, 0xA5, 0x65, 0x64, 0xA4 -.byte 0x6C, 0xAC, 0xAD, 0x6D, 0xAF, 0x6F, 0x6E, 0xAE -.byte 0xAA, 0x6A, 0x6B, 0xAB, 0x69, 0xA9, 0xA8, 0x68 -.byte 0x78, 0xB8, 0xB9, 0x79, 0xBB, 0x7B, 0x7A, 0xBA -.byte 0xBE, 0x7E, 0x7F, 0xBF, 0x7D, 0xBD, 0xBC, 0x7C -.byte 0xB4, 0x74, 0x75, 0xB5, 0x77, 0xB7, 0xB6, 0x76 -.byte 0x72, 0xB2, 0xB3, 0x73, 0xB1, 0x71, 0x70, 0xB0 -.byte 0x50, 0x90, 0x91, 0x51, 0x93, 0x53, 0x52, 0x92 -.byte 0x96, 0x56, 0x57, 0x97, 0x55, 0x95, 0x94, 0x54 -.byte 0x9C, 0x5C, 0x5D, 0x9D, 0x5F, 0x9F, 0x9E, 0x5E -.byte 0x5A, 0x9A, 0x9B, 0x5B, 0x99, 0x59, 0x58, 0x98 -.byte 0x88, 0x48, 0x49, 0x89, 0x4B, 0x8B, 0x8A, 0x4A -.byte 0x4E, 0x8E, 0x8F, 0x4F, 0x8D, 0x4D, 0x4C, 0x8C -.byte 0x44, 0x84, 0x85, 0x45, 0x87, 0x47, 0x46, 0x86 -.byte 0x82, 0x42, 0x43, 0x83, 0x41, 0x81, 0x80, 0x40 - diff --git a/tmk_core/protocol/vusb/usbdrv/usbdrvasm20.inc b/tmk_core/protocol/vusb/usbdrv/usbdrvasm20.inc deleted file mode 100644 index 303abaf64c..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/usbdrvasm20.inc +++ /dev/null @@ -1,360 +0,0 @@ -/* Name: usbdrvasm20.inc - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Jeroen Benschop - * Based on usbdrvasm16.inc from Christian Starkjohann - * Creation Date: 2008-03-05 - * Tabsize: 4 - * Copyright: (c) 2008 by Jeroen Benschop and OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * Revision: $Id: usbdrvasm20.inc 740 2009-04-13 18:23:31Z cs $ - */ - -/* Do not link this file! Link usbdrvasm.S instead, which includes the - * appropriate implementation! - */ - -/* -General Description: -This file is the 20 MHz version of the asssembler part of the USB driver. It -requires a 20 MHz crystal (not a ceramic resonator and not a calibrated RC -oscillator). - -See usbdrv.h for a description of the entire driver. - -Since almost all of this code is timing critical, don't change unless you -really know what you are doing! Many parts require not only a maximum number -of CPU cycles, but even an exact number of cycles! -*/ - -#define leap2 x3 -#ifdef __IAR_SYSTEMS_ASM__ -#define nextInst $+2 -#else -#define nextInst .+0 -#endif - -;max stack usage: [ret(2), YL, SREG, YH, bitcnt, shift, x1, x2, x3, x4, cnt] = 12 bytes -;nominal frequency: 20 MHz -> 13.333333 cycles per bit, 106.666667 cycles per byte -; Numbers in brackets are clocks counted from center of last sync bit -; when instruction starts -;register use in receive loop: -; shift assembles the byte currently being received -; x1 holds the D+ and D- line state -; x2 holds the previous line state -; x4 (leap) is used to add a leap cycle once every three bytes received -; X3 (leap2) is used to add a leap cycle once every three stuff bits received -; bitcnt is used to determine when a stuff bit is due -; cnt holds the number of bytes left in the receive buffer - -USB_INTR_VECTOR: -;order of registers pushed: YL, SREG YH, [sofError], bitcnt, shift, x1, x2, x3, x4, cnt - push YL ;[-28] push only what is necessary to sync with edge ASAP - in YL, SREG ;[-26] - push YL ;[-25] - push YH ;[-23] -;---------------------------------------------------------------------------- -; Synchronize with sync pattern: -;---------------------------------------------------------------------------- -;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K] -;sync up with J to K edge during sync pattern -- use fastest possible loops -;The first part waits at most 1 bit long since we must be in sync pattern. -;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to -;waitForJ, ensure that this prerequisite is met. -waitForJ: - inc YL - sbis USBIN, USBMINUS - brne waitForJ ; just make sure we have ANY timeout -waitForK: -;The following code results in a sampling window of < 1/4 bit which meets the spec. - sbis USBIN, USBMINUS ;[-19] - rjmp foundK ;[-18] - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK - sbis USBIN, USBMINUS - rjmp foundK -#if USB_COUNT_SOF - lds YL, usbSofCount - inc YL - sts usbSofCount, YL -#endif /* USB_COUNT_SOF */ -#ifdef USB_SOF_HOOK - USB_SOF_HOOK -#endif - rjmp sofError -foundK: ;[-16] -;{3, 5} after falling D- edge, average delay: 4 cycles -;bit0 should be at 34 for center sampling. Currently at 4 so 30 cylces till bit 0 sample -;use 1 bit time for setup purposes, then sample again. Numbers in brackets -;are cycles from center of first sync (double K) bit after the instruction - push bitcnt ;[-16] -; [---] ;[-15] - lds YL, usbInputBufOffset;[-14] -; [---] ;[-13] - clr YH ;[-12] - subi YL, lo8(-(usbRxBuf));[-11] [rx loop init] - sbci YH, hi8(-(usbRxBuf));[-10] [rx loop init] - push shift ;[-9] -; [---] ;[-8] - ldi shift,0x40 ;[-7] set msb to "1" so processing bit7 can be detected - nop2 ;[-6] -; [---] ;[-5] - ldi bitcnt, 5 ;[-4] [rx loop init] - sbis USBIN, USBMINUS ;[-3] we want two bits K (sample 3 cycles too early) - rjmp haveTwoBitsK ;[-2] - pop shift ;[-1] undo the push from before - pop bitcnt ;[1] - rjmp waitForK ;[3] this was not the end of sync, retry -; The entire loop from waitForK until rjmp waitForK above must not exceed two -; bit times (= 27 cycles). - -;---------------------------------------------------------------------------- -; push more registers and initialize values while we sample the first bits: -;---------------------------------------------------------------------------- -haveTwoBitsK: - push x1 ;[0] - push x2 ;[2] - push x3 ;[4] (leap2) - ldi leap2, 0x55 ;[6] add leap cycle on 2nd,5th,8th,... stuff bit - push x4 ;[7] == leap - ldi leap, 0x55 ;[9] skip leap cycle on 2nd,5th,8th,... byte received - push cnt ;[10] - ldi cnt, USB_BUFSIZE ;[12] [rx loop init] - ldi x2, 1<<USBPLUS ;[13] current line state is K state. D+=="1", D-=="0" -bit0: - in x1, USBIN ;[0] sample line state - andi x1, USBMASK ;[1] filter only D+ and D- bits - rjmp handleBit ;[2] make bit0 14 cycles long - -;---------------------------------------------------------------------------- -; Process bit7. However, bit 6 still may need unstuffing. -;---------------------------------------------------------------------------- - -b6checkUnstuff: - dec bitcnt ;[9] - breq unstuff6 ;[10] -bit7: - subi cnt, 1 ;[11] cannot use dec becaus it does not affect the carry flag - brcs overflow ;[12] Too many bytes received. Ignore packet - in x1, USBIN ;[0] sample line state - andi x1, USBMASK ;[1] filter only D+ and D- bits - cpse x1, x2 ;[2] when previous line state equals current line state, handle "1" - rjmp b7handle0 ;[3] when line state differs, handle "0" - sec ;[4] - ror shift ;[5] shift "1" into the data - st y+, shift ;[6] store the data into the buffer - ldi shift, 0x40 ;[7] reset data for receiving the next byte - subi leap, 0x55 ;[9] trick to introduce a leap cycle every 3 bytes - brcc nextInst ;[10 or 11] it will fail after 85 bytes. However low speed can only receive 11 - dec bitcnt ;[11 or 12] - brne bit0 ;[12 or 13] - ldi x1, 1 ;[13 or 14] unstuffing bit 7 - in bitcnt, USBIN ;[0] sample stuff bit - rjmp unstuff ;[1] - -b7handle0: - mov x2,x1 ;[5] Set x2 to current line state - ldi bitcnt, 6 ;[6] - lsr shift ;[7] shift "0" into the data - st y+, shift ;[8] store data into the buffer - ldi shift, 0x40 ;[10] reset data for receiving the next byte - subi leap, 0x55 ;[11] trick to introduce a leap cycle every 3 bytes - brcs bit0 ;[12] it will fail after 85 bytes. However low speed can only receive 11 - rjmp bit0 ;[13] - - -;---------------------------------------------------------------------------- -; Handle unstuff -; x1==0xFF indicate unstuffing bit6 -;---------------------------------------------------------------------------- - -unstuff6: - ldi x1,0xFF ;[12] indicate unstuffing bit 6 - in bitcnt, USBIN ;[0] sample stuff bit - nop ;[1] fix timing -unstuff: ;b0-5 b6 b7 - mov x2,bitcnt ;[3] [2] [3] Set x2 to match line state - subi leap2, 0x55 ;[4] [3] [4] delay loop - brcs nextInst ;[5] [4] [5] add one cycle every three stuff bits - sbci leap2,0 ;[6] [5] [6] - ldi bitcnt,6 ;[7] [6] [7] reset bit stuff counter - andi x2, USBMASK ;[8] [7] [8] only keep D+ and D- - cpi x1,0 ;[9] [8] [9] - brmi bit7 ;[10] [9] [10] finished unstuffing bit6 When x1<0 - breq bitloop ;[11] --- [11] finished unstuffing bit0-5 when x1=0 - nop ;--- --- [12] - in x1, USBIN ;--- --- [0] sample line state for bit0 - andi x1, USBMASK ;--- --- [1] filter only D+ and D- bits - rjmp handleBit ;--- --- [2] make bit0 14 cycles long - -;---------------------------------------------------------------------------- -; Receiver loop (numbers in brackets are cycles within byte after instr) -;---------------------------------------------------------------------------- -bitloop: - in x1, USBIN ;[0] sample line state - andi x1, USBMASK ;[1] filter only D+ and D- bits - breq se0 ;[2] both lines are low so handle se0 -handleBit: - cpse x1, x2 ;[3] when previous line state equals current line state, handle "1" - rjmp handle0 ;[4] when line state differs, handle "0" - sec ;[5] - ror shift ;[6] shift "1" into the data - brcs b6checkUnstuff ;[7] When after shift C is set, next bit is bit7 - nop2 ;[8] - dec bitcnt ;[10] - brne bitloop ;[11] - ldi x1,0 ;[12] indicate unstuff for bit other than bit6 or bit7 - in bitcnt, USBIN ;[0] sample stuff bit - rjmp unstuff ;[1] - -handle0: - mov x2, x1 ;[6] Set x2 to current line state - ldi bitcnt, 6 ;[7] reset unstuff counter. - lsr shift ;[8] shift "0" into the data - brcs bit7 ;[9] When after shift C is set, next bit is bit7 - nop ;[10] - rjmp bitloop ;[11] - -;---------------------------------------------------------------------------- -; End of receive loop. Now start handling EOP -;---------------------------------------------------------------------------- - -macro POP_STANDARD ; 14 cycles - pop cnt - pop x4 - pop x3 - pop x2 - pop x1 - pop shift - pop bitcnt - endm -macro POP_RETI ; 7 cycles - pop YH - pop YL - out SREG, YL - pop YL - endm - - - -#include "asmcommon.inc" - -; USB spec says: -; idle = J -; J = (D+ = 0), (D- = 1) -; K = (D+ = 1), (D- = 0) -; Spec allows 7.5 bit times from EOP to SOP for replies -; 7.5 bit times is 100 cycles. This implementation arrives a bit later at se0 -; then specified in the include file but there is plenty of time - -bitstuffN: - eor x1, x4 ;[8] - ldi x2, 0 ;[9] - nop2 ;[10] - out USBOUT, x1 ;[12] <-- out - rjmp didStuffN ;[0] - -bitstuff7: - eor x1, x4 ;[6] - ldi x2, 0 ;[7] Carry is zero due to brcc - rol shift ;[8] compensate for ror shift at branch destination - nop2 ;[9] - rjmp didStuff7 ;[11] - -sendNakAndReti: - ldi x3, USBPID_NAK ;[-18] - rjmp sendX3AndReti ;[-17] -sendAckAndReti: - ldi cnt, USBPID_ACK ;[-17] -sendCntAndReti: - mov x3, cnt ;[-16] -sendX3AndReti: - ldi YL, 20 ;[-15] x3==r20 address is 20 - ldi YH, 0 ;[-14] - ldi cnt, 2 ;[-13] -; rjmp usbSendAndReti fallthrough - -;usbSend: -;pointer to data in 'Y' -;number of bytes in 'cnt' -- including sync byte [range 2 ... 12] -;uses: x1...x4, btcnt, shift, cnt, Y -;Numbers in brackets are time since first bit of sync pattern is sent -;We don't match the transfer rate exactly (don't insert leap cycles every third -;byte) because the spec demands only 1.5% precision anyway. -usbSendAndReti: ; 12 cycles until SOP - in x2, USBDDR ;[-12] - ori x2, USBMASK ;[-11] - sbi USBOUT, USBMINUS;[-10] prepare idle state; D+ and D- must have been 0 (no pullups) - in x1, USBOUT ;[-8] port mirror for tx loop - out USBDDR, x2 ;[-7] <- acquire bus -; need not init x2 (bitstuff history) because sync starts with 0 - ldi x4, USBMASK ;[-6] exor mask - ldi shift, 0x80 ;[-5] sync byte is first byte sent -txByteLoop: - ldi bitcnt, 0x49 ;[-4] [10] binary 01001001 -txBitLoop: - sbrs shift, 0 ;[-3] [10] [11] - eor x1, x4 ;[-2] [11] [12] - out USBOUT, x1 ;[-1] [12] [13] <-- out N - ror shift ;[0] [13] [14] - ror x2 ;[1] -didStuffN: - nop2 ;[2] - nop ;[4] - cpi x2, 0xfc ;[5] - brcc bitstuffN ;[6] - lsr bitcnt ;[7] - brcc txBitLoop ;[8] - brne txBitLoop ;[9] - - sbrs shift, 0 ;[10] - eor x1, x4 ;[11] -didStuff7: - out USBOUT, x1 ;[-1] [13] <-- out 7 - ror shift ;[0] [14] - ror x2 ;[1] - nop ;[2] - cpi x2, 0xfc ;[3] - brcc bitstuff7 ;[4] - ld shift, y+ ;[5] - dec cnt ;[7] - brne txByteLoop ;[8] -;make SE0: - cbr x1, USBMASK ;[9] prepare SE0 [spec says EOP may be 25 to 30 cycles] - lds x2, usbNewDeviceAddr;[10] - lsl x2 ;[12] we compare with left shifted address - out USBOUT, x1 ;[13] <-- out SE0 -- from now 2 bits = 22 cycles until bus idle - subi YL, 20 + 2 ;[0] Only assign address on data packets, not ACK/NAK in x3 - sbci YH, 0 ;[1] -;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm: -;set address only after data packet was sent, not after handshake - breq skipAddrAssign ;[2] - sts usbDeviceAddr, x2; if not skipped: SE0 is one cycle longer -skipAddrAssign: -;end of usbDeviceAddress transfer - ldi x2, 1<<USB_INTR_PENDING_BIT;[4] int0 occurred during TX -- clear pending flag - USB_STORE_PENDING(x2) ;[5] - ori x1, USBIDLE ;[6] - in x2, USBDDR ;[7] - cbr x2, USBMASK ;[8] set both pins to input - mov x3, x1 ;[9] - cbr x3, USBMASK ;[10] configure no pullup on both pins - ldi x4, 5 ;[11] -se0Delay: - dec x4 ;[12] [15] [18] [21] [24] - brne se0Delay ;[13] [16] [19] [22] [25] - out USBOUT, x1 ;[26] <-- out J (idle) -- end of SE0 (EOP signal) - out USBDDR, x2 ;[27] <-- release bus now - out USBOUT, x3 ;[28] <-- ensure no pull-up resistors are active - rjmp doReturn diff --git a/tmk_core/protocol/vusb/usbdrv/usbportability.h b/tmk_core/protocol/vusb/usbdrv/usbportability.h deleted file mode 100644 index 206041097d..0000000000 --- a/tmk_core/protocol/vusb/usbdrv/usbportability.h +++ /dev/null @@ -1,146 +0,0 @@ -/* Name: usbportability.h - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2008-06-17 - * Tabsize: 4 - * Copyright: (c) 2008 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: usbportability.h 785 2010-05-30 17:57:07Z cs $ - */ - -// clang-format off - -/* -General Description: -This header is intended to contain all (or at least most of) the compiler -and library dependent stuff. The C code is written for avr-gcc and avr-libc. -The API of other development environments is converted to gcc's and avr-libc's -API by means of defines. - -This header also contains all system includes since they depend on the -development environment. - -Thanks to Oleg Semyonov for his help with the IAR tools port! -*/ - -#ifndef __usbportability_h_INCLUDED__ -#define __usbportability_h_INCLUDED__ - -/* We check explicitly for IAR and CodeVision. Default is avr-gcc/avr-libc. */ - -/* ------------------------------------------------------------------------- */ -#if defined __IAR_SYSTEMS_ICC__ || defined __IAR_SYSTEMS_ASM__ /* check for IAR */ -/* ------------------------------------------------------------------------- */ - -#ifndef ENABLE_BIT_DEFINITIONS -# define ENABLE_BIT_DEFINITIONS 1 /* Enable bit definitions */ -#endif - -/* Include IAR headers */ -#include <ioavr.h> -#ifndef __IAR_SYSTEMS_ASM__ -# include <inavr.h> -#endif - -#define __attribute__(arg) /* not supported on IAR */ - -#ifdef __IAR_SYSTEMS_ASM__ -# define __ASSEMBLER__ /* IAR does not define standard macro for asm */ -#endif - -#ifdef __HAS_ELPM__ -# define PROGMEM __farflash -#else -# define PROGMEM __flash -#endif - -#define USB_READ_FLASH(addr) (*(PROGMEM char *)(addr)) - -/* The following definitions are not needed by the driver, but may be of some - * help if you port a gcc based project to IAR. - */ -#define cli() __disable_interrupt() -#define sei() __enable_interrupt() -#define wdt_reset() __watchdog_reset() -#define _BV(x) (1 << (x)) - -/* assembler compatibility macros */ -#define nop2 rjmp $+2 /* jump to next instruction */ -#define XL r26 -#define XH r27 -#define YL r28 -#define YH r29 -#define ZL r30 -#define ZH r31 -#define lo8(x) LOW(x) -#define hi8(x) (((x)>>8) & 0xff) /* not HIGH to allow XLINK to make a proper range check */ - -/* Depending on the device you use, you may get problems with the way usbdrv.h - * handles the differences between devices. Since IAR does not use #defines - * for MCU registers, we can't check for the existence of a particular - * register with an #ifdef. If the autodetection mechanism fails, include - * definitions for the required USB_INTR_* macros in your usbconfig.h. See - * usbconfig-prototype.h and usbdrv.h for details. - */ - -/* ------------------------------------------------------------------------- */ -#elif __CODEVISIONAVR__ /* check for CodeVision AVR */ -/* ------------------------------------------------------------------------- */ -/* This port is not working (yet) */ - -/* #define F_CPU _MCU_CLOCK_FREQUENCY_ seems to be defined automatically */ - -#include <io.h> -#include <delay.h> - -#define __attribute__(arg) /* not supported on IAR */ - -#define PROGMEM __flash -#define USB_READ_FLASH(addr) (*(PROGMEM char *)(addr)) - -#ifndef __ASSEMBLER__ -static inline void cli(void) -{ - #asm("cli"); -} -static inline void sei(void) -{ - #asm("sei"); -} -#endif -#define _delay_ms(t) delay_ms(t) -#define _BV(x) (1 << (x)) -#define USB_CFG_USE_SWITCH_STATEMENT 1 /* macro for if() cascase fails for unknown reason */ - -#define macro .macro -#define endm .endmacro -#define nop2 rjmp .+0 /* jump to next instruction */ - -/* ------------------------------------------------------------------------- */ -#else /* default development environment is avr-gcc/avr-libc */ -/* ------------------------------------------------------------------------- */ - -#include <avr/io.h> -#ifdef __ASSEMBLER__ -# define _VECTOR(N) __vector_ ## N /* io.h does not define this for asm */ -#else -# include <avr/pgmspace.h> -#endif - -#if USB_CFG_DRIVER_FLASH_PAGE -# define USB_READ_FLASH(addr) pgm_read_byte_far(((long)USB_CFG_DRIVER_FLASH_PAGE << 16) | (long)(addr)) -#else -# define USB_READ_FLASH(addr) pgm_read_byte(addr) -#endif - -#define macro .macro -#define endm .endm -#define nop2 rjmp .+0 /* jump to next instruction */ - -#endif /* development environment */ - -/* for conveniecne, ensure that PRG_RDB exists */ -#ifndef PRG_RDB -# define PRG_RDB(addr) USB_READ_FLASH(addr) -#endif -#endif /* __usbportability_h_INCLUDED__ */ diff --git a/tmk_core/protocol/vusb/vusb.c b/tmk_core/protocol/vusb/vusb.c index 4c8e6003fe..5feff889a1 100644 --- a/tmk_core/protocol/vusb/vusb.c +++ b/tmk_core/protocol/vusb/vusb.c @@ -18,7 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include <avr/wdt.h> #include <util/delay.h> #include <stdint.h> -#include "usbdrv.h" +#include <usbdrv/usbdrv.h> #include "usbconfig.h" #include "host.h" #include "report.h" @@ -290,12 +290,12 @@ usbMsgLen_t usbFunctionSetup(uchar data[8]) { if (rq->bRequest == USBRQ_HID_GET_REPORT) { debug("GET_REPORT:"); /* we only have one report type, so don't look at wValue */ - usbMsgPtr = (void *)&keyboard_report; + usbMsgPtr = (usbMsgPtr_t)&keyboard_report; return sizeof(keyboard_report); } else if (rq->bRequest == USBRQ_HID_GET_IDLE) { debug("GET_IDLE: "); // debug_hex(vusb_idle_rate); - usbMsgPtr = &vusb_idle_rate; + usbMsgPtr = (usbMsgPtr_t)&vusb_idle_rate; return 1; } else if (rq->bRequest == USBRQ_HID_SET_IDLE) { vusb_idle_rate = rq->wValue.bytes[1]; @@ -815,29 +815,29 @@ USB_PUBLIC usbMsgLen_t usbFunctionDescriptor(struct usbRequest *rq) { */ switch (rq->wValue.bytes[1]) { case USBDESCR_DEVICE: - usbMsgPtr = (unsigned char *)&usbDeviceDescriptor; + usbMsgPtr = (usbMsgPtr_t)&usbDeviceDescriptor; len = sizeof(usbDeviceDescriptor_t); break; case USBDESCR_CONFIG: - usbMsgPtr = (unsigned char *)&usbConfigurationDescriptor; + usbMsgPtr = (usbMsgPtr_t)&usbConfigurationDescriptor; len = sizeof(usbConfigurationDescriptor_t); break; case USBDESCR_STRING: switch (rq->wValue.bytes[0]) { case 0: - usbMsgPtr = (unsigned char *)&usbStringDescriptorZero; + usbMsgPtr = (usbMsgPtr_t)&usbStringDescriptorZero; len = usbStringDescriptorZero.header.bLength; break; case 1: // iManufacturer - usbMsgPtr = (unsigned char *)&usbStringDescriptorManufacturer; + usbMsgPtr = (usbMsgPtr_t)&usbStringDescriptorManufacturer; len = usbStringDescriptorManufacturer.header.bLength; break; case 2: // iProduct - usbMsgPtr = (unsigned char *)&usbStringDescriptorProduct; + usbMsgPtr = (usbMsgPtr_t)&usbStringDescriptorProduct; len = usbStringDescriptorProduct.header.bLength; break; case 3: // iSerialNumber - usbMsgPtr = (unsigned char *)&usbStringDescriptorSerial; + usbMsgPtr = (usbMsgPtr_t)&usbStringDescriptorSerial; len = usbStringDescriptorSerial.header.bLength; break; } @@ -845,24 +845,24 @@ USB_PUBLIC usbMsgLen_t usbFunctionDescriptor(struct usbRequest *rq) { case USBDESCR_HID: switch (rq->wValue.bytes[0]) { case KEYBOARD_INTERFACE: - usbMsgPtr = (unsigned char *)&usbConfigurationDescriptor.keyboardHID; + usbMsgPtr = (usbMsgPtr_t)&usbConfigurationDescriptor.keyboardHID; len = sizeof(usbHIDDescriptor_t); break; #if defined(RAW_ENABLE) case RAW_INTERFACE: - usbMsgPtr = (unsigned char *)&usbConfigurationDescriptor.rawHID; + usbMsgPtr = (usbMsgPtr_t)&usbConfigurationDescriptor.rawHID; len = sizeof(usbHIDDescriptor_t); break; #endif #if defined(MOUSE_ENABLE) || defined(EXTRAKEY_ENABLE) case MOUSE_EXTRA_INTERFACE: - usbMsgPtr = (unsigned char *)&usbConfigurationDescriptor.mouseExtraHID; + usbMsgPtr = (usbMsgPtr_t)&usbConfigurationDescriptor.mouseExtraHID; len = sizeof(usbHIDDescriptor_t); break; #endif #if defined(CONSOLE_ENABLE) case CONSOLE_INTERFACE: - usbMsgPtr = (unsigned char *)&usbConfigurationDescriptor.consoleHID; + usbMsgPtr = (usbMsgPtr_t)&usbConfigurationDescriptor.consoleHID; len = sizeof(usbHIDDescriptor_t); break; #endif @@ -872,24 +872,24 @@ USB_PUBLIC usbMsgLen_t usbFunctionDescriptor(struct usbRequest *rq) { /* interface index */ switch (rq->wIndex.word) { case KEYBOARD_INTERFACE: - usbMsgPtr = (unsigned char *)keyboard_hid_report; + usbMsgPtr = (usbMsgPtr_t)keyboard_hid_report; len = sizeof(keyboard_hid_report); break; #if defined(RAW_ENABLE) case RAW_INTERFACE: - usbMsgPtr = (unsigned char *)raw_hid_report; + usbMsgPtr = (usbMsgPtr_t)raw_hid_report; len = sizeof(raw_hid_report); break; #endif #if defined(MOUSE_ENABLE) || defined(EXTRAKEY_ENABLE) case MOUSE_EXTRA_INTERFACE: - usbMsgPtr = (unsigned char *)mouse_extra_hid_report; + usbMsgPtr = (usbMsgPtr_t)mouse_extra_hid_report; len = sizeof(mouse_extra_hid_report); break; #endif #if defined(CONSOLE_ENABLE) case CONSOLE_INTERFACE: - usbMsgPtr = (unsigned char *)console_hid_report; + usbMsgPtr = (usbMsgPtr_t)console_hid_report; len = sizeof(console_hid_report); break; #endif |