diff options
Diffstat (limited to 'tmk_core')
38 files changed, 327 insertions, 2125 deletions
diff --git a/tmk_core/common.mk b/tmk_core/common.mk index e44ff2f0ab..f0faa2dc3e 100644 --- a/tmk_core/common.mk +++ b/tmk_core/common.mk @@ -55,8 +55,6 @@ ifeq ($(strip $(NKRO_ENABLE)), yes) $(info NKRO is not currently supported on V-USB, and has been disabled.) else ifeq ($(strip $(BLUETOOTH_ENABLE)), yes) $(info NKRO is not currently supported with Bluetooth, and has been disabled.) - else ifneq ($(BLUETOOTH),) - $(info NKRO is not currently supported with Bluetooth, and has been disabled.) else TMK_COMMON_DEFS += -DNKRO_ENABLE SHARED_EP_ENABLE = yes @@ -77,23 +75,6 @@ ifeq ($(strip $(NO_SUSPEND_POWER_DOWN)), yes) TMK_COMMON_DEFS += -DNO_SUSPEND_POWER_DOWN endif -ifeq ($(strip $(BLUETOOTH_ENABLE)), yes) - TMK_COMMON_DEFS += -DBLUETOOTH_ENABLE - TMK_COMMON_DEFS += -DNO_USB_STARTUP_CHECK -endif - -ifeq ($(strip $(BLUETOOTH)), AdafruitBLE) - TMK_COMMON_DEFS += -DBLUETOOTH_ENABLE - TMK_COMMON_DEFS += -DMODULE_ADAFRUIT_BLE - TMK_COMMON_DEFS += -DNO_USB_STARTUP_CHECK -endif - -ifeq ($(strip $(BLUETOOTH)), RN42) - TMK_COMMON_DEFS += -DBLUETOOTH_ENABLE - TMK_COMMON_DEFS += -DMODULE_RN42 - TMK_COMMON_DEFS += -DNO_USB_STARTUP_CHECK -endif - ifeq ($(strip $(SWAP_HANDS_ENABLE)), yes) TMK_COMMON_DEFS += -DSWAP_HANDS_ENABLE endif diff --git a/tmk_core/common/arm_atsam/eeprom.c b/tmk_core/common/arm_atsam/eeprom.c index ccd5d15a54..ff1a692623 100644 --- a/tmk_core/common/arm_atsam/eeprom.c +++ b/tmk_core/common/arm_atsam/eeprom.c @@ -13,24 +13,110 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ - #include "eeprom.h" +#include "debug.h" +#include "samd51j18a.h" +#include "core_cm4.h" +#include "component/nvmctrl.h" #ifndef EEPROM_SIZE # include "eeconfig.h" # define EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4) // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO #endif -__attribute__((aligned(4))) static uint8_t buffer[EEPROM_SIZE]; +#ifndef MAX +# define MAX(X, Y) ((X) > (Y) ? (X) : (Y)) +#endif + +#ifndef BUSY_RETRIES +# define BUSY_RETRIES 10000 +#endif + +// #define DEBUG_EEPROM_OUTPUT + +/* + * Debug print utils + */ +#if defined(DEBUG_EEPROM_OUTPUT) +# define eeprom_printf(fmt, ...) xprintf(fmt, ##__VA_ARGS__); +#else /* NO_DEBUG */ +# define eeprom_printf(fmt, ...) +#endif /* NO_DEBUG */ + +__attribute__((aligned(4))) static uint8_t buffer[EEPROM_SIZE] = {0}; +volatile uint8_t * SmartEEPROM8 = (uint8_t *)SEEPROM_ADDR; + +static inline bool eeprom_is_busy(void) { + int timeout = BUSY_RETRIES; + while (NVMCTRL->SEESTAT.bit.BUSY && timeout-- > 0) + ; + + return NVMCTRL->SEESTAT.bit.BUSY; +} + +static uint32_t get_virtual_eeprom_size(void) { + // clang-format off + static const uint32_t VIRTUAL_EEPROM_MAP[11][8] = { + /* 4 8 16 32 64 128 256 512 */ + /* 0*/ { 0, 0, 0, 0, 0, 0, 0, 0 }, + /* 1*/ { 512, 1024, 2048, 4096, 4096, 4096, 4096, 4096 }, + /* 2*/ { 512, 1024, 2048, 4096, 8192, 8192, 8192, 8192 }, + /* 3*/ { 512, 1024, 2048, 4096, 8192, 16384, 16384, 16384 }, + /* 4*/ { 512, 1024, 2048, 4096, 8192, 16384, 16384, 16384 }, + /* 5*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 32768 }, + /* 6*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 32768 }, + /* 7*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 32768 }, + /* 8*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 32768 }, + /* 9*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536 }, + /*10*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536 }, + }; + // clang-format on + + static uint32_t virtual_eeprom_size = UINT32_MAX; + if (virtual_eeprom_size == UINT32_MAX) { + virtual_eeprom_size = VIRTUAL_EEPROM_MAP[NVMCTRL->SEESTAT.bit.PSZ][NVMCTRL->SEESTAT.bit.SBLK]; + } + // eeprom_printf("get_virtual_eeprom_size:: %d:%d:%d\n", NVMCTRL->SEESTAT.bit.PSZ, NVMCTRL->SEESTAT.bit.SBLK, virtual_eeprom_size); + return virtual_eeprom_size; +} uint8_t eeprom_read_byte(const uint8_t *addr) { uintptr_t offset = (uintptr_t)addr; - return buffer[offset]; + if (offset >= MAX(EEPROM_SIZE, get_virtual_eeprom_size())) { + eeprom_printf("eeprom_read_byte:: out of bounds\n"); + return 0x0; + } + + if (get_virtual_eeprom_size() == 0) { + return buffer[offset]; + } + + if (eeprom_is_busy()) { + eeprom_printf("eeprom_write_byte:: timeout\n"); + return 0x0; + } + + return SmartEEPROM8[offset]; } void eeprom_write_byte(uint8_t *addr, uint8_t value) { uintptr_t offset = (uintptr_t)addr; - buffer[offset] = value; + if (offset >= MAX(EEPROM_SIZE, get_virtual_eeprom_size())) { + eeprom_printf("eeprom_write_byte:: out of bounds\n"); + return; + } + + if (get_virtual_eeprom_size() == 0) { + buffer[offset] = value; + return; + } + + if (eeprom_is_busy()) { + eeprom_printf("eeprom_write_byte:: timeout\n"); + return; + } + + SmartEEPROM8[offset] = value; } uint16_t eeprom_read_word(const uint16_t *addr) { diff --git a/tmk_core/common/avr/suspend.c b/tmk_core/common/avr/suspend.c index 690d7f38ca..b614746e6c 100644 --- a/tmk_core/common/avr/suspend.c +++ b/tmk_core/common/avr/suspend.c @@ -16,25 +16,6 @@ # include "vusb.h" #endif -#ifdef BACKLIGHT_ENABLE -# include "backlight.h" -#endif - -#ifdef AUDIO_ENABLE -# include "audio.h" -#endif /* AUDIO_ENABLE */ - -#if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE) -# include "rgblight.h" -#endif - -#ifdef LED_MATRIX_ENABLE -# include "led_matrix.h" -#endif -#ifdef RGB_MATRIX_ENABLE -# include "rgb_matrix.h" -#endif - /** \brief Suspend idle * * FIXME: needs doc @@ -50,17 +31,6 @@ void suspend_idle(uint8_t time) { // TODO: This needs some cleanup -/** \brief Run keyboard level Power down - * - * FIXME: needs doc - */ -__attribute__((weak)) void suspend_power_down_user(void) {} -/** \brief Run keyboard level Power down - * - * FIXME: needs doc - */ -__attribute__((weak)) void suspend_power_down_kb(void) { suspend_power_down_user(); } - #if !defined(NO_SUSPEND_POWER_DOWN) && defined(WDT_vect) // clang-format off @@ -135,41 +105,9 @@ void suspend_power_down(void) { if (!vusb_suspended) return; #endif - suspend_power_down_kb(); + suspend_power_down_quantum(); #ifndef NO_SUSPEND_POWER_DOWN - // Turn off backlight -# ifdef BACKLIGHT_ENABLE - backlight_set(0); -# endif - - // Turn off LED indicators - uint8_t leds_off = 0; -# if defined(BACKLIGHT_CAPS_LOCK) && defined(BACKLIGHT_ENABLE) - if (is_backlight_enabled()) { - // Don't try to turn off Caps Lock indicator as it is backlight and backlight is already off - leds_off |= (1 << USB_LED_CAPS_LOCK); - } -# endif - led_set(leds_off); - - // Turn off audio -# ifdef AUDIO_ENABLE - stop_all_notes(); -# endif - - // Turn off underglow -# if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE) - rgblight_suspend(); -# endif - -# if defined(LED_MATRIX_ENABLE) - led_matrix_set_suspend_state(true); -# endif -# if defined(RGB_MATRIX_ENABLE) - rgb_matrix_set_suspend_state(true); -# endif - // Enter sleep state if possible (ie, the MCU has a watchdog timeout interrupt) # if defined(WDT_vect) power_down(WDTO_15MS); @@ -189,18 +127,6 @@ bool suspend_wakeup_condition(void) { return false; } -/** \brief run user level code immediately after wakeup - * - * FIXME: needs doc - */ -__attribute__((weak)) void suspend_wakeup_init_user(void) {} - -/** \brief run keyboard level code immediately after wakeup - * - * FIXME: needs doc - */ -__attribute__((weak)) void suspend_wakeup_init_kb(void) { suspend_wakeup_init_user(); } - /** \brief run immediately after wakeup * * FIXME: needs doc @@ -209,27 +135,7 @@ void suspend_wakeup_init(void) { // clear keyboard state clear_keyboard(); - // Turn on backlight -#ifdef BACKLIGHT_ENABLE - backlight_init(); -#endif - - // Restore LED indicators - led_set(host_keyboard_leds()); - - // Wake up underglow -#if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE) - rgblight_wakeup(); -#endif - -#if defined(LED_MATRIX_ENABLE) - led_matrix_set_suspend_state(false); -#endif -#if defined(RGB_MATRIX_ENABLE) - rgb_matrix_set_suspend_state(false); -#endif - - suspend_wakeup_init_kb(); + suspend_wakeup_init_quantum(); } #if !defined(NO_SUSPEND_POWER_DOWN) && defined(WDT_vect) diff --git a/tmk_core/common/chibios/_wait.h b/tmk_core/common/chibios/_wait.h index b740afbd24..2f36c64a2e 100644 --- a/tmk_core/common/chibios/_wait.h +++ b/tmk_core/common/chibios/_wait.h @@ -43,8 +43,6 @@ void wait_us(uint16_t duration); #include "_wait.c" -#define CPU_CLOCK STM32_SYSCLK - /* For GPIOs on ARM-based MCUs, the input pins are sampled by the clock of the bus * to which the GPIO is connected. * The connected buses differ depending on the various series of MCUs. diff --git a/tmk_core/common/chibios/chibios_config.h b/tmk_core/common/chibios/chibios_config.h index 23c65f9428..c35f589557 100644 --- a/tmk_core/common/chibios/chibios_config.h +++ b/tmk_core/common/chibios/chibios_config.h @@ -19,22 +19,33 @@ # define SPLIT_USB_DETECT // Force this on when dedicated pin is not used #endif -#if defined(STM32F1XX) -# define USE_GPIOV1 -#endif +// STM32 compatibility +#if defined(MCU_STM32) +# define CPU_CLOCK STM32_SYSCLK -#if defined(STM32F1XX) || defined(STM32F2XX) || defined(STM32F4XX) || defined(STM32L1XX) -# define USE_I2CV1 -#endif +# if defined(STM32F1XX) +# define USE_GPIOV1 +# define PAL_MODE_ALTERNATE_OPENDRAIN PAL_MODE_STM32_ALTERNATE_OPENDRAIN +# define PAL_MODE_ALTERNATE_PUSHPULL PAL_MODE_STM32_ALTERNATE_PUSHPULL +# else +# define PAL_OUTPUT_TYPE_OPENDRAIN PAL_STM32_OTYPE_OPENDRAIN +# define PAL_OUTPUT_TYPE_PUSHPULL PAL_STM32_OTYPE_PUSHPULL +# define PAL_OUTPUT_SPEED_HIGHEST PAL_STM32_OSPEED_HIGHEST +# define PAL_PUPDR_FLOATING PAL_STM32_PUPDR_FLOATING +# endif -// teensy -#if defined(K20x) || defined(KL2x) -# define USE_I2CV1 -# define USE_I2CV1_CONTRIB // for some reason a bunch of ChibiOS-Contrib boards only have clock_speed -# define USE_GPIOV1 -# define STM32_SYSCLK KINETIS_SYSCLK_FREQUENCY +# if defined(STM32F1XX) || defined(STM32F2XX) || defined(STM32F4XX) || defined(STM32L1XX) +# define USE_I2CV1 +# endif #endif -#if defined(MK66F18) -# define STM32_SYSCLK KINETIS_SYSCLK_FREQUENCY -#endif +// teensy compatibility +#if defined(MCU_KINETIS) +# define CPU_CLOCK KINETIS_SYSCLK_FREQUENCY + +# if defined(K20x) || defined(KL2x) +# define USE_I2CV1 +# define USE_I2CV1_CONTRIB // for some reason a bunch of ChibiOS-Contrib boards only have clock_speed +# define USE_GPIOV1 +# endif +#endif
\ No newline at end of file diff --git a/tmk_core/common/chibios/eeprom_stm32.c b/tmk_core/common/chibios/eeprom_stm32.c index 1fdf8c1e29..acc6a48516 100644 --- a/tmk_core/common/chibios/eeprom_stm32.c +++ b/tmk_core/common/chibios/eeprom_stm32.c @@ -620,48 +620,11 @@ uint16_t EEPROM_ReadDataWord(uint16_t Address) { } /***************************************************************************** - * Wrap library in AVR style functions. + * Bind to eeprom_driver.c *******************************************************************************/ -uint8_t eeprom_read_byte(const uint8_t *Address) { return EEPROM_ReadDataByte((const uintptr_t)Address); } +void eeprom_driver_init(void) { EEPROM_Init(); } -void eeprom_write_byte(uint8_t *Address, uint8_t Value) { EEPROM_WriteDataByte((uintptr_t)Address, Value); } - -void eeprom_update_byte(uint8_t *Address, uint8_t Value) { EEPROM_WriteDataByte((uintptr_t)Address, Value); } - -uint16_t eeprom_read_word(const uint16_t *Address) { return EEPROM_ReadDataWord((const uintptr_t)Address); } - -void eeprom_write_word(uint16_t *Address, uint16_t Value) { EEPROM_WriteDataWord((uintptr_t)Address, Value); } - -void eeprom_update_word(uint16_t *Address, uint16_t Value) { EEPROM_WriteDataWord((uintptr_t)Address, Value); } - -uint32_t eeprom_read_dword(const uint32_t *Address) { - const uint16_t p = (const uintptr_t)Address; - /* Check word alignment */ - if (p % 2) { - /* Not aligned */ - return (uint32_t)EEPROM_ReadDataByte(p) | (uint32_t)(EEPROM_ReadDataWord(p + 1) << 8) | (uint32_t)(EEPROM_ReadDataByte(p + 3) << 24); - } else { - /* Aligned */ - return EEPROM_ReadDataWord(p) | (EEPROM_ReadDataWord(p + 2) << 16); - } -} - -void eeprom_write_dword(uint32_t *Address, uint32_t Value) { - uint16_t p = (const uintptr_t)Address; - /* Check word alignment */ - if (p % 2) { - /* Not aligned */ - EEPROM_WriteDataByte(p, (uint8_t)Value); - EEPROM_WriteDataWord(p + 1, (uint16_t)(Value >> 8)); - EEPROM_WriteDataByte(p + 3, (uint8_t)(Value >> 24)); - } else { - /* Aligned */ - EEPROM_WriteDataWord(p, (uint16_t)Value); - EEPROM_WriteDataWord(p + 2, (uint16_t)(Value >> 16)); - } -} - -void eeprom_update_dword(uint32_t *Address, uint32_t Value) { eeprom_write_dword(Address, Value); } +void eeprom_driver_erase(void) { EEPROM_Erase(); } void eeprom_read_block(void *buf, const void *addr, size_t len) { const uint8_t *src = (const uint8_t *)addr; @@ -670,14 +633,14 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) { /* Check word alignment */ if (len && (uintptr_t)src % 2) { /* Read the unaligned first byte */ - *dest++ = eeprom_read_byte(src++); + *dest++ = EEPROM_ReadDataByte((const uintptr_t)src++); --len; } uint16_t value; bool aligned = ((uintptr_t)dest % 2 == 0); while (len > 1) { - value = eeprom_read_word((uint16_t *)src); + value = EEPROM_ReadDataWord((const uintptr_t)((uint16_t *)src)); if (aligned) { *(uint16_t *)dest = value; dest += 2; @@ -689,7 +652,7 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) { len -= 2; } if (len) { - *dest = eeprom_read_byte(src); + *dest = EEPROM_ReadDataByte((const uintptr_t)src); } } @@ -700,7 +663,7 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) { /* Check word alignment */ if (len && (uintptr_t)dest % 2) { /* Write the unaligned first byte */ - eeprom_write_byte(dest++, *src++); + EEPROM_WriteDataByte((uintptr_t)dest++, *src++); --len; } @@ -712,15 +675,13 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) { } else { value = *(uint8_t *)src | (*(uint8_t *)(src + 1) << 8); } - eeprom_write_word((uint16_t *)dest, value); + EEPROM_WriteDataWord((uintptr_t)((uint16_t *)dest), value); dest += 2; src += 2; len -= 2; } if (len) { - eeprom_write_byte(dest, *src); + EEPROM_WriteDataByte((uintptr_t)dest, *src); } } - -void eeprom_update_block(const void *buf, void *addr, size_t len) { eeprom_write_block(buf, addr, len); } diff --git a/tmk_core/common/chibios/eeprom_stm32_defs.h b/tmk_core/common/chibios/eeprom_stm32_defs.h index 22b4ab858e..cc64cda748 100644 --- a/tmk_core/common/chibios/eeprom_stm32_defs.h +++ b/tmk_core/common/chibios/eeprom_stm32_defs.h @@ -32,6 +32,13 @@ # ifndef FEE_PAGE_COUNT # define FEE_PAGE_COUNT 4 // How many pages are used # endif +# elif defined(STM32F401xC) || defined(STM32F405xG) || defined(STM32F411xE) +# ifndef FEE_PAGE_SIZE +# define FEE_PAGE_SIZE 0x4000 // Page size = 16KByte +# endif +# ifndef FEE_PAGE_COUNT +# define FEE_PAGE_COUNT 1 // How many pages are used +# endif # endif #endif @@ -40,17 +47,21 @@ # define FEE_MCU_FLASH_SIZE 32 // Size in Kb # elif defined(STM32F103xB) || defined(STM32F072xB) || defined(STM32F070xB) # define FEE_MCU_FLASH_SIZE 128 // Size in Kb -# elif defined(STM32F303xC) +# elif defined(STM32F303xC) || defined(STM32F401xC) # define FEE_MCU_FLASH_SIZE 256 // Size in Kb -# elif defined(STM32F103xE) +# elif defined(STM32F103xE) || defined(STM32F411xE) # define FEE_MCU_FLASH_SIZE 512 // Size in Kb +# elif defined(STM32F405xG) +# define FEE_MCU_FLASH_SIZE 1024 // Size in Kb # endif #endif /* Start of the emulated eeprom */ #if !defined(FEE_PAGE_BASE_ADDRESS) -# if 0 -/* TODO: Add support for F4 */ +# if defined(STM32F401xC) || defined(STM32F405xG) || defined(STM32F411xE) +# ifndef FEE_PAGE_BASE_ADDRESS +# define FEE_PAGE_BASE_ADDRESS 0x08004000 // bodge to force 2nd 16k page +# endif # else # ifndef FEE_FLASH_BASE # define FEE_FLASH_BASE 0x8000000 diff --git a/tmk_core/common/chibios/flash_stm32.c b/tmk_core/common/chibios/flash_stm32.c index 6b80ff71c3..8f10903d3d 100644 --- a/tmk_core/common/chibios/flash_stm32.c +++ b/tmk_core/common/chibios/flash_stm32.c @@ -23,6 +23,29 @@ # define FLASH_SR_WRPERR FLASH_SR_WRPRTERR #endif +#if defined(EEPROM_EMU_STM32F401xC) +# define FLASH_SR_PGERR (FLASH_SR_PGSERR | FLASH_SR_PGPERR | FLASH_SR_PGAERR) + +# define FLASH_KEY1 0x45670123U +# define FLASH_KEY2 0xCDEF89ABU + +static uint8_t ADDR2PAGE(uint32_t Page_Address) { + switch (Page_Address) { + case 0x08000000 ... 0x08003FFF: + return 0; + case 0x08004000 ... 0x08007FFF: + return 1; + case 0x08008000 ... 0x0800BFFF: + return 2; + case 0x0800C000 ... 0x0800FFFF: + return 3; + } + + // TODO: bad times... + return 7; +} +#endif + /* Delay definition */ #define EraseTimeout ((uint32_t)0x00000FFF) #define ProgramTimeout ((uint32_t)0x0000001F) @@ -53,7 +76,9 @@ FLASH_Status FLASH_GetStatus(void) { if ((FLASH->SR & FLASH_SR_WRPERR) != 0) return FLASH_ERROR_WRP; +#if defined(FLASH_OBR_OPTERR) if ((FLASH->SR & FLASH_OBR_OPTERR) != 0) return FLASH_ERROR_OPT; +#endif return FLASH_COMPLETE; } @@ -95,15 +120,24 @@ FLASH_Status FLASH_ErasePage(uint32_t Page_Address) { if (status == FLASH_COMPLETE) { /* if the previous operation is completed, proceed to erase the page */ +#if defined(FLASH_CR_SNB) + FLASH->CR &= ~FLASH_CR_SNB; + FLASH->CR |= FLASH_CR_SER | (ADDR2PAGE(Page_Address) << FLASH_CR_SNB_Pos); +#else FLASH->CR |= FLASH_CR_PER; FLASH->AR = Page_Address; +#endif FLASH->CR |= FLASH_CR_STRT; /* Wait for last operation to be completed */ status = FLASH_WaitForLastOperation(EraseTimeout); if (status != FLASH_TIMEOUT) { - /* if the erase operation is completed, disable the PER Bit */ + /* if the erase operation is completed, disable the configured Bits */ +#if defined(FLASH_CR_SNB) + FLASH->CR &= ~(FLASH_CR_SER | FLASH_CR_SNB); +#else FLASH->CR &= ~FLASH_CR_PER; +#endif } FLASH->SR = (FLASH_SR_EOP | FLASH_SR_PGERR | FLASH_SR_WRPERR); } @@ -126,6 +160,11 @@ FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) { status = FLASH_WaitForLastOperation(ProgramTimeout); if (status == FLASH_COMPLETE) { /* if the previous operation is completed, proceed to program the new data */ + +#if defined(FLASH_CR_PSIZE) + FLASH->CR &= ~FLASH_CR_PSIZE; + FLASH->CR |= FLASH_CR_PSIZE_0; +#endif FLASH->CR |= FLASH_CR_PG; *(__IO uint16_t*)Address = Data; /* Wait for last operation to be completed */ diff --git a/tmk_core/common/chibios/suspend.c b/tmk_core/common/chibios/suspend.c index 38517e06f0..9310a99920 100644 --- a/tmk_core/common/chibios/suspend.c +++ b/tmk_core/common/chibios/suspend.c @@ -7,30 +7,12 @@ #include "action.h" #include "action_util.h" #include "mousekey.h" +#include "programmable_button.h" #include "host.h" #include "suspend.h" #include "led.h" #include "wait.h" -#ifdef AUDIO_ENABLE -# include "audio.h" -#endif /* AUDIO_ENABLE */ - -#ifdef BACKLIGHT_ENABLE -# include "backlight.h" -#endif - -#if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE) -# include "rgblight.h" -#endif - -#ifdef LED_MATRIX_ENABLE -# include "led_matrix.h" -#endif -#ifdef RGB_MATRIX_ENABLE -# include "rgb_matrix.h" -#endif - /** \brief suspend idle * * FIXME: needs doc @@ -40,61 +22,12 @@ void suspend_idle(uint8_t time) { wait_ms(time); } -/** \brief Run keyboard level Power down - * - * FIXME: needs doc - */ -__attribute__((weak)) void suspend_power_down_user(void) {} -/** \brief Run keyboard level Power down - * - * FIXME: needs doc - */ -__attribute__((weak)) void suspend_power_down_kb(void) { suspend_power_down_user(); } - /** \brief suspend power down * * FIXME: needs doc */ void suspend_power_down(void) { -#ifdef BACKLIGHT_ENABLE - backlight_set(0); -#endif - -#ifdef LED_MATRIX_ENABLE - led_matrix_task(); -#endif -#ifdef RGB_MATRIX_ENABLE - rgb_matrix_task(); -#endif - - // Turn off LED indicators - uint8_t leds_off = 0; -#if defined(BACKLIGHT_CAPS_LOCK) && defined(BACKLIGHT_ENABLE) - if (is_backlight_enabled()) { - // Don't try to turn off Caps Lock indicator as it is backlight and backlight is already off - leds_off |= (1 << USB_LED_CAPS_LOCK); - } -#endif - led_set(leds_off); - - // TODO: figure out what to power down and how - // shouldn't power down TPM/FTM if we want a breathing LED - // also shouldn't power down USB -#if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE) - rgblight_suspend(); -#endif - -#if defined(LED_MATRIX_ENABLE) - led_matrix_set_suspend_state(true); -#endif -#if defined(RGB_MATRIX_ENABLE) - rgb_matrix_set_suspend_state(true); -#endif -#ifdef AUDIO_ENABLE - stop_all_notes(); -#endif /* AUDIO_ENABLE */ - - suspend_power_down_kb(); + suspend_power_down_quantum(); // on AVR, this enables the watchdog for 15ms (max), and goes to // SLEEP_MODE_PWR_DOWN @@ -147,23 +80,13 @@ void suspend_wakeup_init(void) { #ifdef MOUSEKEY_ENABLE mousekey_clear(); #endif /* MOUSEKEY_ENABLE */ +#ifdef PROGRAMMABLE_BUTTON_ENABLE + programmable_button_clear(); +#endif /* PROGRAMMABLE_BUTTON_ENABLE */ #ifdef EXTRAKEY_ENABLE host_system_send(0); host_consumer_send(0); #endif /* EXTRAKEY_ENABLE */ -#ifdef BACKLIGHT_ENABLE - backlight_init(); -#endif /* BACKLIGHT_ENABLE */ - led_set(host_keyboard_leds()); -#if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE) - rgblight_wakeup(); -#endif -#if defined(LED_MATRIX_ENABLE) - led_matrix_set_suspend_state(false); -#endif -#if defined(RGB_MATRIX_ENABLE) - rgb_matrix_set_suspend_state(false); -#endif - suspend_wakeup_init_kb(); + suspend_wakeup_init_quantum(); } diff --git a/tmk_core/common/host.c b/tmk_core/common/host.c index f0c396b189..56d4bb0847 100644 --- a/tmk_core/common/host.c +++ b/tmk_core/common/host.c @@ -30,8 +30,9 @@ extern keymap_config_t keymap_config; #endif static host_driver_t *driver; -static uint16_t last_system_report = 0; -static uint16_t last_consumer_report = 0; +static uint16_t last_system_report = 0; +static uint16_t last_consumer_report = 0; +static uint32_t last_programmable_button_report = 0; void host_set_driver(host_driver_t *d) { driver = d; } @@ -122,6 +123,16 @@ void host_digitizer_send(digitizer_t *digitizer) { __attribute__((weak)) void send_digitizer(report_digitizer_t *report) {} +void host_programmable_button_send(uint32_t report) { + if (report == last_programmable_button_report) return; + last_programmable_button_report = report; + + if (!driver) return; + (*driver->send_programmable_button)(report); +} + uint16_t host_last_system_report(void) { return last_system_report; } uint16_t host_last_consumer_report(void) { return last_consumer_report; } + +uint32_t host_last_programmable_button_report(void) { return last_programmable_button_report; } diff --git a/tmk_core/common/host.h b/tmk_core/common/host.h index 2cffef6e15..6b15f0d0c1 100644 --- a/tmk_core/common/host.h +++ b/tmk_core/common/host.h @@ -47,9 +47,11 @@ void host_keyboard_send(report_keyboard_t *report); void host_mouse_send(report_mouse_t *report); void host_system_send(uint16_t data); void host_consumer_send(uint16_t data); +void host_programmable_button_send(uint32_t data); uint16_t host_last_system_report(void); uint16_t host_last_consumer_report(void); +uint32_t host_last_programmable_button_report(void); #ifdef __cplusplus } diff --git a/tmk_core/common/host_driver.h b/tmk_core/common/host_driver.h index 2aebca043d..affd0dcb34 100644 --- a/tmk_core/common/host_driver.h +++ b/tmk_core/common/host_driver.h @@ -29,6 +29,7 @@ typedef struct { void (*send_mouse)(report_mouse_t *); void (*send_system)(uint16_t); void (*send_consumer)(uint16_t); + void (*send_programmable_button)(uint32_t); } host_driver_t; void send_digitizer(report_digitizer_t *report);
\ No newline at end of file diff --git a/tmk_core/common/report.h b/tmk_core/common/report.h index f2223e8063..1adc892f3b 100644 --- a/tmk_core/common/report.h +++ b/tmk_core/common/report.h @@ -29,6 +29,7 @@ enum hid_report_ids { REPORT_ID_MOUSE, REPORT_ID_SYSTEM, REPORT_ID_CONSUMER, + REPORT_ID_PROGRAMMABLE_BUTTON, REPORT_ID_NKRO, REPORT_ID_JOYSTICK, REPORT_ID_DIGITIZER @@ -196,6 +197,11 @@ typedef struct { } __attribute__((packed)) report_extra_t; typedef struct { + uint8_t report_id; + uint32_t usage; +} __attribute__((packed)) report_programmable_button_t; + +typedef struct { #ifdef MOUSE_SHARED_EP uint8_t report_id; #endif diff --git a/tmk_core/common/suspend.h b/tmk_core/common/suspend.h index 95845e4b63..081735f90e 100644 --- a/tmk_core/common/suspend.h +++ b/tmk_core/common/suspend.h @@ -10,8 +10,10 @@ void suspend_wakeup_init(void); void suspend_wakeup_init_user(void); void suspend_wakeup_init_kb(void); +void suspend_wakeup_init_quantum(void); void suspend_power_down_user(void); void suspend_power_down_kb(void); +void suspend_power_down_quantum(void); #ifndef USB_SUSPEND_WAKEUP_DELAY # define USB_SUSPEND_WAKEUP_DELAY 0 diff --git a/tmk_core/common/sync_timer.c b/tmk_core/common/sync_timer.c index 68b92d8b43..de24b463b6 100644 --- a/tmk_core/common/sync_timer.c +++ b/tmk_core/common/sync_timer.c @@ -26,7 +26,7 @@ SOFTWARE. #include "sync_timer.h" #include "keyboard.h" -#if (defined(SPLIT_KEYBOARD) || defined(SERIAL_LINK_ENABLE)) && !defined(DISABLE_SYNC_TIMER) +#if defined(SPLIT_KEYBOARD) && !defined(DISABLE_SYNC_TIMER) volatile int32_t sync_timer_ms; void sync_timer_init(void) { sync_timer_ms = 0; } diff --git a/tmk_core/common/sync_timer.h b/tmk_core/common/sync_timer.h index 744e2b50d5..9ddef45bb2 100644 --- a/tmk_core/common/sync_timer.h +++ b/tmk_core/common/sync_timer.h @@ -32,7 +32,7 @@ SOFTWARE. extern "C" { #endif -#if (defined(SPLIT_KEYBOARD) || defined(SERIAL_LINK_ENABLE)) && !defined(DISABLE_SYNC_TIMER) +#if defined(SPLIT_KEYBOARD) && !defined(DISABLE_SYNC_TIMER) void sync_timer_init(void); void sync_timer_update(uint32_t time); uint16_t sync_timer_read(void); diff --git a/tmk_core/common/test/rules.mk b/tmk_core/common/test/rules.mk index 48632a095b..73d2302da7 100644 --- a/tmk_core/common/test/rules.mk +++ b/tmk_core/common/test/rules.mk @@ -16,6 +16,7 @@ eeprom_stm32_tiny_INC := $(eeprom_stm32_INC) eeprom_stm32_large_INC := $(eeprom_stm32_INC) eeprom_stm32_SRC := \ + $(TOP_DIR)/drivers/eeprom/eeprom_driver.c \ $(TMK_PATH)/common/test/eeprom_stm32_tests.cpp \ $(TMK_PATH)/common/test/flash_stm32_mock.c \ $(TMK_PATH)/common/chibios/eeprom_stm32.c diff --git a/tmk_core/protocol/chibios/chibios.c b/tmk_core/protocol/chibios/chibios.c index 78a2e3fcbb..c860328c80 100644 --- a/tmk_core/protocol/chibios/chibios.c +++ b/tmk_core/protocol/chibios/chibios.c @@ -27,6 +27,7 @@ #include "keyboard.h" #include "action.h" #include "action_util.h" +#include "usb_device_state.h" #include "mousekey.h" #include "led.h" #include "sendchar.h" @@ -42,12 +43,6 @@ #ifdef SLEEP_LED_ENABLE # include "sleep_led.h" #endif -#ifdef SERIAL_LINK_ENABLE -# include "serial_link/system/serial_link.h" -#endif -#ifdef VISUALIZER_ENABLE -# include "visualizer/visualizer.h" -#endif #ifdef MIDI_ENABLE # include "qmk_midi.h" #endif @@ -139,6 +134,8 @@ void boardInit(void) { } void protocol_setup(void) { + usb_device_state_init(); + // TESTING // chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); @@ -154,19 +151,11 @@ void protocol_init(void) { setup_midi(); #endif -#ifdef SERIAL_LINK_ENABLE - init_serial_link(); -#endif - -#ifdef VISUALIZER_ENABLE - visualizer_init(); -#endif - host_driver_t *driver = NULL; - /* Wait until the USB or serial link is active */ + /* Wait until USB is active */ while (true) { -#if defined(WAIT_FOR_USB) || defined(SERIAL_LINK_ENABLE) +#if defined(WAIT_FOR_USB) if (USB_DRIVER.state == USB_ACTIVE) { driver = &chibios_driver; break; @@ -175,13 +164,6 @@ void protocol_init(void) { driver = &chibios_driver; break; #endif -#ifdef SERIAL_LINK_ENABLE - if (is_serial_link_connected()) { - driver = get_serial_link_driver(); - break; - } - serial_link_update(); -#endif wait_ms(50); } @@ -211,14 +193,8 @@ void protocol_task(void) { #if !defined(NO_USB_STARTUP_CHECK) if (USB_DRIVER.state == USB_SUSPENDED) { print("[s]"); -# ifdef VISUALIZER_ENABLE - visualizer_suspend(); -# endif while (USB_DRIVER.state == USB_SUSPENDED) { /* Do this in the suspended state */ -# ifdef SERIAL_LINK_ENABLE - serial_link_update(); -# endif suspend_power_down(); // on AVR this deep sleeps for 15ms /* Remote wakeup */ if (suspend_wakeup_condition()) { @@ -232,10 +208,6 @@ void protocol_task(void) { # ifdef MOUSEKEY_ENABLE mousekey_send(); # endif /* MOUSEKEY_ENABLE */ - -# ifdef VISUALIZER_ENABLE - visualizer_resume(); -# endif } #endif diff --git a/tmk_core/protocol/chibios/usb_main.c b/tmk_core/protocol/chibios/usb_main.c index cc282e6a9b..9b139b3992 100644 --- a/tmk_core/protocol/chibios/usb_main.c +++ b/tmk_core/protocol/chibios/usb_main.c @@ -39,6 +39,7 @@ # include "led.h" #endif #include "wait.h" +#include "usb_device_state.h" #include "usb_descriptor.h" #include "usb_driver.h" @@ -412,6 +413,7 @@ static inline bool usb_event_queue_dequeue(usbevent_t *event) { } static inline void usb_event_suspend_handler(void) { + usb_device_state_set_suspend(USB_DRIVER.configuration != 0, USB_DRIVER.configuration); #ifdef SLEEP_LED_ENABLE sleep_led_enable(); #endif /* SLEEP_LED_ENABLE */ @@ -419,6 +421,7 @@ static inline void usb_event_suspend_handler(void) { static inline void usb_event_wakeup_handler(void) { suspend_wakeup_init(); + usb_device_state_set_resume(USB_DRIVER.configuration != 0, USB_DRIVER.configuration); #ifdef SLEEP_LED_ENABLE sleep_led_disable(); // NOTE: converters may not accept this @@ -440,6 +443,15 @@ void usb_event_queue_task(void) { last_suspend_state = false; usb_event_wakeup_handler(); break; + case USB_EVENT_CONFIGURED: + usb_device_state_set_configuration(USB_DRIVER.configuration != 0, USB_DRIVER.configuration); + break; + case USB_EVENT_UNCONFIGURED: + usb_device_state_set_configuration(false, 0); + break; + case USB_EVENT_RESET: + usb_device_state_set_reset(); + break; default: // Nothing to do, we don't handle it. break; @@ -482,13 +494,14 @@ static void usb_event_cb(USBDriver *usbp, usbevent_t event) { if (last_suspend_state) { usb_event_queue_enqueue(USB_EVENT_WAKEUP); } + usb_event_queue_enqueue(USB_EVENT_CONFIGURED); return; case USB_EVENT_SUSPEND: - usb_event_queue_enqueue(USB_EVENT_SUSPEND); /* Falls into.*/ case USB_EVENT_UNCONFIGURED: /* Falls into.*/ case USB_EVENT_RESET: + usb_event_queue_enqueue(event); for (int i = 0; i < NUM_USB_DRIVERS; i++) { chSysLockFromISR(); /* Disconnection event on suspend.*/ diff --git a/tmk_core/protocol/ibm4704.c b/tmk_core/protocol/ibm4704.c deleted file mode 100644 index a19443976e..0000000000 --- a/tmk_core/protocol/ibm4704.c +++ /dev/null @@ -1,185 +0,0 @@ -/* -Copyright 2010,2011,2012,2013 Jun WAKO <wakojun@gmail.com> -*/ -#include <stdbool.h> -#include <util/delay.h> -#include "debug.h" -#include "ring_buffer.h" -#include "ibm4704.h" - -#define WAIT(stat, us, err) \ - do { \ - if (!wait_##stat(us)) { \ - ibm4704_error = err; \ - goto ERROR; \ - } \ - } while (0) - -uint8_t ibm4704_error = 0; - -void ibm4704_init(void) { - inhibit(); // keep keyboard from sending - IBM4704_INT_INIT(); - IBM4704_INT_ON(); - idle(); // allow keyboard sending -} - -/* -Host to Keyboard ----------------- -Data bits are LSB first and Parity is odd. Clock has around 60us high and 30us low part. - - ____ __ __ __ __ __ __ __ __ __ ________ -Clock \______/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ - ^ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ___ -Data ____|__/ X____X____X____X____X____X____X____X____X____X \___ - | Start 0 1 2 3 4 5 6 7 P Stop - Request by host - -Start bit: can be long as 300-350us. -Request: Host pulls Clock line down to request to send a command. -Timing: After Request keyboard pull up Data and down Clock line to low for start bit. - After request host release Clock line once Data line becomes hi. - Host writes a bit while Clock is hi and Keyboard reads while low. -Stop bit: Host releases or pulls up Data line to hi after 9th clock and waits for keyboard pull down the line to lo. -*/ -uint8_t ibm4704_send(uint8_t data) { - bool parity = true; // odd parity - ibm4704_error = 0; - - IBM4704_INT_OFF(); - - /* Request to send */ - idle(); - clock_lo(); - - /* wait for Start bit(Clock:lo/Data:hi) */ - WAIT(data_hi, 300, 0x30); - - /* Data bit */ - for (uint8_t i = 0; i < 8; i++) { - WAIT(clock_hi, 100, 0x40 + i); - if (data & (1 << i)) { - parity = !parity; - data_hi(); - } else { - data_lo(); - } - WAIT(clock_lo, 100, 0x48 + i); - } - - /* Parity bit */ - WAIT(clock_hi, 100, 0x34); - if (parity) { - data_hi(); - } else { - data_lo(); - } - WAIT(clock_lo, 100, 0x35); - - /* Stop bit */ - WAIT(clock_hi, 100, 0x34); - data_hi(); - - /* End */ - WAIT(data_lo, 100, 0x36); - - idle(); - IBM4704_INT_ON(); - return 0; -ERROR: - idle(); - if (ibm4704_error > 0x30) { - xprintf("S:%02X ", ibm4704_error); - } - IBM4704_INT_ON(); - return -1; -} - -/* wait forever to receive data */ -uint8_t ibm4704_recv_response(void) { - while (!rbuf_has_data()) { - _delay_ms(1); - } - return rbuf_dequeue(); -} - -uint8_t ibm4704_recv(void) { - if (rbuf_has_data()) { - return rbuf_dequeue(); - } else { - return -1; - } -} - -/* -Keyboard to Host ----------------- -Data bits are LSB first and Parity is odd. Clock has around 60us high and 30us low part. - - ____ __ __ __ __ __ __ __ __ __ _______ -Clock \_____/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ - ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ -Data ____/ X____X____X____X____X____X____X____X____X____X________ - Start 0 1 2 3 4 5 6 7 P Stop - -Start bit: can be long as 300-350us. -Inhibit: Pull Data line down to inhibit keyboard to send. -Timing: Host reads bit while Clock is hi.(rising edge) -Stop bit: Keyboard pulls down Data line to lo after 9th clock. -*/ -ISR(IBM4704_INT_VECT) { - static enum { BIT0, BIT1, BIT2, BIT3, BIT4, BIT5, BIT6, BIT7, PARITY, STOP } state = BIT0; - // LSB first - static uint8_t data = 0; - // Odd parity - static uint8_t parity = false; - - ibm4704_error = 0; - - switch (state) { - case BIT0: - case BIT1: - case BIT2: - case BIT3: - case BIT4: - case BIT5: - case BIT6: - case BIT7: - data >>= 1; - if (data_in()) { - data |= 0x80; - parity = !parity; - } - break; - case PARITY: - if (data_in()) { - parity = !parity; - } - if (!parity) goto ERROR; - break; - case STOP: - // Data:Low - WAIT(data_lo, 100, state); - if (!rbuf_enqueue(data)) { - print("rbuf: full\n"); - } - ibm4704_error = IBM4704_ERR_NONE; - goto DONE; - break; - default: - goto ERROR; - } - state++; - goto RETURN; -ERROR: - ibm4704_error = state; - while (ibm4704_send(0xFE)) _delay_ms(1); // resend - xprintf("R:%02X%02X\n", state, data); -DONE: - state = BIT0; - data = 0; - parity = false; -RETURN: - return; -} diff --git a/tmk_core/protocol/ibm4704.h b/tmk_core/protocol/ibm4704.h deleted file mode 100644 index 4f88d148b3..0000000000 --- a/tmk_core/protocol/ibm4704.h +++ /dev/null @@ -1,103 +0,0 @@ -/* -Copyright 2014 Jun WAKO <wakojun@gmail.com> -*/ - -#pragma once - -#define IBM4704_ERR_NONE 0 -#define IBM4704_ERR_PARITY 0x70 - -void ibm4704_init(void); -uint8_t ibm4704_send(uint8_t data); -uint8_t ibm4704_recv_response(void); -uint8_t ibm4704_recv(void); - -/* Check pin configuration */ -#if !(defined(IBM4704_CLOCK_PORT) && defined(IBM4704_CLOCK_PIN) && defined(IBM4704_CLOCK_DDR) && defined(IBM4704_CLOCK_BIT)) -# error "ibm4704 clock pin configuration is required in config.h" -#endif - -#if !(defined(IBM4704_DATA_PORT) && defined(IBM4704_DATA_PIN) && defined(IBM4704_DATA_DDR) && defined(IBM4704_DATA_BIT)) -# error "ibm4704 data pin configuration is required in config.h" -#endif - -/*-------------------------------------------------------------------- - * static functions - *------------------------------------------------------------------*/ -static inline void clock_lo(void) { - IBM4704_CLOCK_PORT &= ~(1 << IBM4704_CLOCK_BIT); - IBM4704_CLOCK_DDR |= (1 << IBM4704_CLOCK_BIT); -} -static inline void clock_hi(void) { - /* input with pull up */ - IBM4704_CLOCK_DDR &= ~(1 << IBM4704_CLOCK_BIT); - IBM4704_CLOCK_PORT |= (1 << IBM4704_CLOCK_BIT); -} -static inline bool clock_in(void) { - IBM4704_CLOCK_DDR &= ~(1 << IBM4704_CLOCK_BIT); - IBM4704_CLOCK_PORT |= (1 << IBM4704_CLOCK_BIT); - _delay_us(1); - return IBM4704_CLOCK_PIN & (1 << IBM4704_CLOCK_BIT); -} -static inline void data_lo(void) { - IBM4704_DATA_PORT &= ~(1 << IBM4704_DATA_BIT); - IBM4704_DATA_DDR |= (1 << IBM4704_DATA_BIT); -} -static inline void data_hi(void) { - /* input with pull up */ - IBM4704_DATA_DDR &= ~(1 << IBM4704_DATA_BIT); - IBM4704_DATA_PORT |= (1 << IBM4704_DATA_BIT); -} -static inline bool data_in(void) { - IBM4704_DATA_DDR &= ~(1 << IBM4704_DATA_BIT); - IBM4704_DATA_PORT |= (1 << IBM4704_DATA_BIT); - _delay_us(1); - return IBM4704_DATA_PIN & (1 << IBM4704_DATA_BIT); -} - -static inline uint16_t wait_clock_lo(uint16_t us) { - while (clock_in() && us) { - asm(""); - _delay_us(1); - us--; - } - return us; -} -static inline uint16_t wait_clock_hi(uint16_t us) { - while (!clock_in() && us) { - asm(""); - _delay_us(1); - us--; - } - return us; -} -static inline uint16_t wait_data_lo(uint16_t us) { - while (data_in() && us) { - asm(""); - _delay_us(1); - us--; - } - return us; -} -static inline uint16_t wait_data_hi(uint16_t us) { - while (!data_in() && us) { - asm(""); - _delay_us(1); - us--; - } - return us; -} - -/* idle state that device can send */ -static inline void idle(void) { - clock_hi(); - data_hi(); -} - -/* inhibit device to send - * keyboard checks Data line on start bit(Data:hi) and it stops sending if Data line is low. - */ -static inline void inhibit(void) { - clock_hi(); - data_lo(); -} diff --git a/tmk_core/protocol/lufa.mk b/tmk_core/protocol/lufa.mk index c8935dacb7..00fec478ac 100644 --- a/tmk_core/protocol/lufa.mk +++ b/tmk_core/protocol/lufa.mk @@ -3,7 +3,6 @@ LUFA_DIR = protocol/lufa # Path to the LUFA library LUFA_PATH = $(LIB_PATH)/lufa - # Create the LUFA source path variables by including the LUFA makefile ifneq (, $(wildcard $(LUFA_PATH)/LUFA/Build/lufa_sources.mk)) # New build system from 20120730 @@ -22,23 +21,6 @@ ifeq ($(strip $(MIDI_ENABLE)), yes) include $(TMK_PATH)/protocol/midi.mk endif -ifeq ($(strip $(BLUETOOTH_ENABLE)), yes) - LUFA_SRC += outputselect.c \ - $(TMK_DIR)/protocol/serial_uart.c -endif - -ifeq ($(strip $(BLUETOOTH)), AdafruitBLE) - LUFA_SRC += spi_master.c \ - analog.c \ - outputselect.c \ - $(LUFA_DIR)/adafruit_ble.cpp -endif - -ifeq ($(strip $(BLUETOOTH)), RN42) - LUFA_SRC += outputselect.c \ - $(TMK_DIR)/protocol/serial_uart.c -endif - ifeq ($(strip $(VIRTSER_ENABLE)), yes) LUFA_SRC += $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/CDCClassDevice.c endif @@ -50,19 +32,10 @@ SRC += $(LUFA_DIR)/usb_util.c VPATH += $(TMK_PATH)/$(LUFA_DIR) VPATH += $(LUFA_PATH) -# Option modules -#ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) -#endif - -#ifdef EXTRAKEY_ENABLE -#endif - # LUFA library compile-time options and predefined tokens LUFA_OPTS = -DUSB_DEVICE_ONLY LUFA_OPTS += -DUSE_FLASH_DESCRIPTORS LUFA_OPTS += -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -#LUFA_OPTS += -DINTERRUPT_CONTROL_ENDPOINT -LUFA_OPTS += -DFIXED_CONTROL_ENDPOINT_SIZE=8 LUFA_OPTS += -DFIXED_CONTROL_ENDPOINT_SIZE=8 LUFA_OPTS += -DFIXED_NUM_CONFIGURATIONS=1 diff --git a/tmk_core/protocol/lufa/adafruit_ble.cpp b/tmk_core/protocol/lufa/adafruit_ble.cpp deleted file mode 100644 index 3f2cc35734..0000000000 --- a/tmk_core/protocol/lufa/adafruit_ble.cpp +++ /dev/null @@ -1,701 +0,0 @@ -#include "adafruit_ble.h" - -#include <stdio.h> -#include <stdlib.h> -#include <alloca.h> -#include "debug.h" -#include "timer.h" -#include "action_util.h" -#include "ringbuffer.hpp" -#include <string.h> -#include "spi_master.h" -#include "wait.h" -#include "analog.h" -#include "progmem.h" - -// These are the pin assignments for the 32u4 boards. -// You may define them to something else in your config.h -// if yours is wired up differently. -#ifndef AdafruitBleResetPin -# define AdafruitBleResetPin D4 -#endif - -#ifndef AdafruitBleCSPin -# define AdafruitBleCSPin B4 -#endif - -#ifndef AdafruitBleIRQPin -# define AdafruitBleIRQPin E6 -#endif - -#ifndef AdafruitBleSpiClockSpeed -# define AdafruitBleSpiClockSpeed 4000000UL // SCK frequency -#endif - -#define SCK_DIVISOR (F_CPU / AdafruitBleSpiClockSpeed) - -#define SAMPLE_BATTERY -#define ConnectionUpdateInterval 1000 /* milliseconds */ - -#ifndef BATTERY_LEVEL_PIN -# define BATTERY_LEVEL_PIN B5 -#endif - -static struct { - bool is_connected; - bool initialized; - bool configured; - -#define ProbedEvents 1 -#define UsingEvents 2 - bool event_flags; - -#ifdef SAMPLE_BATTERY - uint16_t last_battery_update; - uint32_t vbat; -#endif - uint16_t last_connection_update; -} state; - -// Commands are encoded using SDEP and sent via SPI -// https://github.com/adafruit/Adafruit_BluefruitLE_nRF51/blob/master/SDEP.md - -#define SdepMaxPayload 16 -struct sdep_msg { - uint8_t type; - uint8_t cmd_low; - uint8_t cmd_high; - struct __attribute__((packed)) { - uint8_t len : 7; - uint8_t more : 1; - }; - uint8_t payload[SdepMaxPayload]; -} __attribute__((packed)); - -// The recv latency is relatively high, so when we're hammering keys quickly, -// we want to avoid waiting for the responses in the matrix loop. We maintain -// a short queue for that. Since there is quite a lot of space overhead for -// the AT command representation wrapped up in SDEP, we queue the minimal -// information here. - -enum queue_type { - QTKeyReport, // 1-byte modifier + 6-byte key report - QTConsumer, // 16-bit key code -#ifdef MOUSE_ENABLE - QTMouseMove, // 4-byte mouse report -#endif -}; - -struct queue_item { - enum queue_type queue_type; - uint16_t added; - union __attribute__((packed)) { - struct __attribute__((packed)) { - uint8_t modifier; - uint8_t keys[6]; - } key; - - uint16_t consumer; - struct __attribute__((packed)) { - int8_t x, y, scroll, pan; - uint8_t buttons; - } mousemove; - }; -}; - -// Items that we wish to send -static RingBuffer<queue_item, 40> send_buf; -// Pending response; while pending, we can't send any more requests. -// This records the time at which we sent the command for which we -// are expecting a response. -static RingBuffer<uint16_t, 2> resp_buf; - -static bool process_queue_item(struct queue_item *item, uint16_t timeout); - -enum sdep_type { - SdepCommand = 0x10, - SdepResponse = 0x20, - SdepAlert = 0x40, - SdepError = 0x80, - SdepSlaveNotReady = 0xFE, // Try again later - SdepSlaveOverflow = 0xFF, // You read more data than is available -}; - -enum ble_cmd { - BleInitialize = 0xBEEF, - BleAtWrapper = 0x0A00, - BleUartTx = 0x0A01, - BleUartRx = 0x0A02, -}; - -enum ble_system_event_bits { - BleSystemConnected = 0, - BleSystemDisconnected = 1, - BleSystemUartRx = 8, - BleSystemMidiRx = 10, -}; - -#define SdepTimeout 150 /* milliseconds */ -#define SdepShortTimeout 10 /* milliseconds */ -#define SdepBackOff 25 /* microseconds */ -#define BatteryUpdateInterval 10000 /* milliseconds */ - -static bool at_command(const char *cmd, char *resp, uint16_t resplen, bool verbose, uint16_t timeout = SdepTimeout); -static bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose = false); - -// Send a single SDEP packet -static bool sdep_send_pkt(const struct sdep_msg *msg, uint16_t timeout) { - spi_start(AdafruitBleCSPin, false, 0, SCK_DIVISOR); - uint16_t timerStart = timer_read(); - bool success = false; - bool ready = false; - - do { - ready = spi_write(msg->type) != SdepSlaveNotReady; - if (ready) { - break; - } - - // Release it and let it initialize - spi_stop(); - wait_us(SdepBackOff); - spi_start(AdafruitBleCSPin, false, 0, SCK_DIVISOR); - } while (timer_elapsed(timerStart) < timeout); - - if (ready) { - // Slave is ready; send the rest of the packet - spi_transmit(&msg->cmd_low, sizeof(*msg) - (1 + sizeof(msg->payload)) + msg->len); - success = true; - } - - spi_stop(); - - return success; -} - -static inline void sdep_build_pkt(struct sdep_msg *msg, uint16_t command, const uint8_t *payload, uint8_t len, bool moredata) { - msg->type = SdepCommand; - msg->cmd_low = command & 0xFF; - msg->cmd_high = command >> 8; - msg->len = len; - msg->more = (moredata && len == SdepMaxPayload) ? 1 : 0; - - static_assert(sizeof(*msg) == 20, "msg is correctly packed"); - - memcpy(msg->payload, payload, len); -} - -// Read a single SDEP packet -static bool sdep_recv_pkt(struct sdep_msg *msg, uint16_t timeout) { - bool success = false; - uint16_t timerStart = timer_read(); - bool ready = false; - - do { - ready = readPin(AdafruitBleIRQPin); - if (ready) { - break; - } - wait_us(1); - } while (timer_elapsed(timerStart) < timeout); - - if (ready) { - spi_start(AdafruitBleCSPin, false, 0, SCK_DIVISOR); - - do { - // Read the command type, waiting for the data to be ready - msg->type = spi_read(); - if (msg->type == SdepSlaveNotReady || msg->type == SdepSlaveOverflow) { - // Release it and let it initialize - spi_stop(); - wait_us(SdepBackOff); - spi_start(AdafruitBleCSPin, false, 0, SCK_DIVISOR); - continue; - } - - // Read the rest of the header - spi_receive(&msg->cmd_low, sizeof(*msg) - (1 + sizeof(msg->payload))); - - // and get the payload if there is any - if (msg->len <= SdepMaxPayload) { - spi_receive(msg->payload, msg->len); - } - success = true; - break; - } while (timer_elapsed(timerStart) < timeout); - - spi_stop(); - } - return success; -} - -static void resp_buf_read_one(bool greedy) { - uint16_t last_send; - if (!resp_buf.peek(last_send)) { - return; - } - - if (readPin(AdafruitBleIRQPin)) { - struct sdep_msg msg; - - again: - if (sdep_recv_pkt(&msg, SdepTimeout)) { - if (!msg.more) { - // We got it; consume this entry - resp_buf.get(last_send); - dprintf("recv latency %dms\n", TIMER_DIFF_16(timer_read(), last_send)); - } - - if (greedy && resp_buf.peek(last_send) && readPin(AdafruitBleIRQPin)) { - goto again; - } - } - - } else if (timer_elapsed(last_send) > SdepTimeout * 2) { - dprintf("waiting_for_result: timeout, resp_buf size %d\n", (int)resp_buf.size()); - - // Timed out: consume this entry - resp_buf.get(last_send); - } -} - -static void send_buf_send_one(uint16_t timeout = SdepTimeout) { - struct queue_item item; - - // Don't send anything more until we get an ACK - if (!resp_buf.empty()) { - return; - } - - if (!send_buf.peek(item)) { - return; - } - if (process_queue_item(&item, timeout)) { - // commit that peek - send_buf.get(item); - dprintf("send_buf_send_one: have %d remaining\n", (int)send_buf.size()); - } else { - dprint("failed to send, will retry\n"); - wait_ms(SdepTimeout); - resp_buf_read_one(true); - } -} - -static void resp_buf_wait(const char *cmd) { - bool didPrint = false; - while (!resp_buf.empty()) { - if (!didPrint) { - dprintf("wait on buf for %s\n", cmd); - didPrint = true; - } - resp_buf_read_one(true); - } -} - -static bool ble_init(void) { - state.initialized = false; - state.configured = false; - state.is_connected = false; - - setPinInput(AdafruitBleIRQPin); - - spi_init(); - - // Perform a hardware reset - setPinOutput(AdafruitBleResetPin); - writePinHigh(AdafruitBleResetPin); - writePinLow(AdafruitBleResetPin); - wait_ms(10); - writePinHigh(AdafruitBleResetPin); - - wait_ms(1000); // Give it a second to initialize - - state.initialized = true; - return state.initialized; -} - -static inline uint8_t min(uint8_t a, uint8_t b) { return a < b ? a : b; } - -static bool read_response(char *resp, uint16_t resplen, bool verbose) { - char *dest = resp; - char *end = dest + resplen; - - while (true) { - struct sdep_msg msg; - - if (!sdep_recv_pkt(&msg, 2 * SdepTimeout)) { - dprint("sdep_recv_pkt failed\n"); - return false; - } - - if (msg.type != SdepResponse) { - *resp = 0; - return false; - } - - uint8_t len = min(msg.len, end - dest); - if (len > 0) { - memcpy(dest, msg.payload, len); - dest += len; - } - - if (!msg.more) { - // No more data is expected! - break; - } - } - - // Ensure the response is NUL terminated - *dest = 0; - - // "Parse" the result text; we want to snip off the trailing OK or ERROR line - // Rewind past the possible trailing CRLF so that we can strip it - --dest; - while (dest > resp && (dest[0] == '\n' || dest[0] == '\r')) { - *dest = 0; - --dest; - } - - // Look back for start of preceeding line - char *last_line = strrchr(resp, '\n'); - if (last_line) { - ++last_line; - } else { - last_line = resp; - } - - bool success = false; - static const char kOK[] PROGMEM = "OK"; - - success = !strcmp_P(last_line, kOK); - - if (verbose || !success) { - dprintf("result: %s\n", resp); - } - return success; -} - -static bool at_command(const char *cmd, char *resp, uint16_t resplen, bool verbose, uint16_t timeout) { - const char * end = cmd + strlen(cmd); - struct sdep_msg msg; - - if (verbose) { - dprintf("ble send: %s\n", cmd); - } - - if (resp) { - // They want to decode the response, so we need to flush and wait - // for all pending I/O to finish before we start this one, so - // that we don't confuse the results - resp_buf_wait(cmd); - *resp = 0; - } - - // Fragment the command into a series of SDEP packets - while (end - cmd > SdepMaxPayload) { - sdep_build_pkt(&msg, BleAtWrapper, (uint8_t *)cmd, SdepMaxPayload, true); - if (!sdep_send_pkt(&msg, timeout)) { - return false; - } - cmd += SdepMaxPayload; - } - - sdep_build_pkt(&msg, BleAtWrapper, (uint8_t *)cmd, end - cmd, false); - if (!sdep_send_pkt(&msg, timeout)) { - return false; - } - - if (resp == NULL) { - uint16_t now = timer_read(); - while (!resp_buf.enqueue(now)) { - resp_buf_read_one(false); - } - uint16_t later = timer_read(); - if (TIMER_DIFF_16(later, now) > 0) { - dprintf("waited %dms for resp_buf\n", TIMER_DIFF_16(later, now)); - } - return true; - } - - return read_response(resp, resplen, verbose); -} - -bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose) { - char *cmdbuf = (char *)alloca(strlen_P(cmd) + 1); - strcpy_P(cmdbuf, cmd); - return at_command(cmdbuf, resp, resplen, verbose); -} - -bool adafruit_ble_is_connected(void) { return state.is_connected; } - -bool adafruit_ble_enable_keyboard(void) { - char resbuf[128]; - - if (!state.initialized && !ble_init()) { - return false; - } - - state.configured = false; - - // Disable command echo - static const char kEcho[] PROGMEM = "ATE=0"; - // Make the advertised name match the keyboard - static const char kGapDevName[] PROGMEM = "AT+GAPDEVNAME=" STR(PRODUCT); - // Turn on keyboard support - static const char kHidEnOn[] PROGMEM = "AT+BLEHIDEN=1"; - - // Adjust intervals to improve latency. This causes the "central" - // system (computer/tablet) to poll us every 10-30 ms. We can't - // set a smaller value than 10ms, and 30ms seems to be the natural - // processing time on my macbook. Keeping it constrained to that - // feels reasonable to type to. - static const char kGapIntervals[] PROGMEM = "AT+GAPINTERVALS=10,30,,"; - - // Reset the device so that it picks up the above changes - static const char kATZ[] PROGMEM = "ATZ"; - - // Turn down the power level a bit - static const char kPower[] PROGMEM = "AT+BLEPOWERLEVEL=-12"; - static PGM_P const configure_commands[] PROGMEM = { - kEcho, kGapIntervals, kGapDevName, kHidEnOn, kPower, kATZ, - }; - - uint8_t i; - for (i = 0; i < sizeof(configure_commands) / sizeof(configure_commands[0]); ++i) { - PGM_P cmd; - memcpy_P(&cmd, configure_commands + i, sizeof(cmd)); - - if (!at_command_P(cmd, resbuf, sizeof(resbuf))) { - dprintf("failed BLE command: %S: %s\n", cmd, resbuf); - goto fail; - } - } - - state.configured = true; - - // Check connection status in a little while; allow the ATZ time - // to kick in. - state.last_connection_update = timer_read(); -fail: - return state.configured; -} - -static void set_connected(bool connected) { - if (connected != state.is_connected) { - if (connected) { - dprint("BLE connected\n"); - } else { - dprint("BLE disconnected\n"); - } - state.is_connected = connected; - - // TODO: if modifiers are down on the USB interface and - // we cut over to BLE or vice versa, they will remain stuck. - // This feels like a good point to do something like clearing - // the keyboard and/or generating a fake all keys up message. - // However, I've noticed that it takes a couple of seconds - // for macOS to to start recognizing key presses after BLE - // is in the connected state, so I worry that doing that - // here may not be good enough. - } -} - -void adafruit_ble_task(void) { - char resbuf[48]; - - if (!state.configured && !adafruit_ble_enable_keyboard()) { - return; - } - resp_buf_read_one(true); - send_buf_send_one(SdepShortTimeout); - - if (resp_buf.empty() && (state.event_flags & UsingEvents) && readPin(AdafruitBleIRQPin)) { - // Must be an event update - if (at_command_P(PSTR("AT+EVENTSTATUS"), resbuf, sizeof(resbuf))) { - uint32_t mask = strtoul(resbuf, NULL, 16); - - if (mask & BleSystemConnected) { - set_connected(true); - } else if (mask & BleSystemDisconnected) { - set_connected(false); - } - } - } - - if (timer_elapsed(state.last_connection_update) > ConnectionUpdateInterval) { - bool shouldPoll = true; - if (!(state.event_flags & ProbedEvents)) { - // Request notifications about connection status changes. - // This only works in SPIFRIEND firmware > 0.6.7, which is why - // we check for this conditionally here. - // Note that at the time of writing, HID reports only work correctly - // with Apple products on firmware version 0.6.7! - // https://forums.adafruit.com/viewtopic.php?f=8&t=104052 - if (at_command_P(PSTR("AT+EVENTENABLE=0x1"), resbuf, sizeof(resbuf))) { - at_command_P(PSTR("AT+EVENTENABLE=0x2"), resbuf, sizeof(resbuf)); - state.event_flags |= UsingEvents; - } - state.event_flags |= ProbedEvents; - - // leave shouldPoll == true so that we check at least once - // before relying solely on events - } else { - shouldPoll = false; - } - - static const char kGetConn[] PROGMEM = "AT+GAPGETCONN"; - state.last_connection_update = timer_read(); - - if (at_command_P(kGetConn, resbuf, sizeof(resbuf))) { - set_connected(atoi(resbuf)); - } - } - -#ifdef SAMPLE_BATTERY - if (timer_elapsed(state.last_battery_update) > BatteryUpdateInterval && resp_buf.empty()) { - state.last_battery_update = timer_read(); - - state.vbat = analogReadPin(BATTERY_LEVEL_PIN); - } -#endif -} - -static bool process_queue_item(struct queue_item *item, uint16_t timeout) { - char cmdbuf[48]; - char fmtbuf[64]; - - // Arrange to re-check connection after keys have settled - state.last_connection_update = timer_read(); - -#if 1 - if (TIMER_DIFF_16(state.last_connection_update, item->added) > 0) { - dprintf("send latency %dms\n", TIMER_DIFF_16(state.last_connection_update, item->added)); - } -#endif - - switch (item->queue_type) { - case QTKeyReport: - strcpy_P(fmtbuf, PSTR("AT+BLEKEYBOARDCODE=%02x-00-%02x-%02x-%02x-%02x-%02x-%02x")); - snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->key.modifier, item->key.keys[0], item->key.keys[1], item->key.keys[2], item->key.keys[3], item->key.keys[4], item->key.keys[5]); - return at_command(cmdbuf, NULL, 0, true, timeout); - - case QTConsumer: - strcpy_P(fmtbuf, PSTR("AT+BLEHIDCONTROLKEY=0x%04x")); - snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->consumer); - return at_command(cmdbuf, NULL, 0, true, timeout); - -#ifdef MOUSE_ENABLE - case QTMouseMove: - strcpy_P(fmtbuf, PSTR("AT+BLEHIDMOUSEMOVE=%d,%d,%d,%d")); - snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->mousemove.x, item->mousemove.y, item->mousemove.scroll, item->mousemove.pan); - if (!at_command(cmdbuf, NULL, 0, true, timeout)) { - return false; - } - strcpy_P(cmdbuf, PSTR("AT+BLEHIDMOUSEBUTTON=")); - if (item->mousemove.buttons & MOUSE_BTN1) { - strcat(cmdbuf, "L"); - } - if (item->mousemove.buttons & MOUSE_BTN2) { - strcat(cmdbuf, "R"); - } - if (item->mousemove.buttons & MOUSE_BTN3) { - strcat(cmdbuf, "M"); - } - if (item->mousemove.buttons == 0) { - strcat(cmdbuf, "0"); - } - return at_command(cmdbuf, NULL, 0, true, timeout); -#endif - default: - return true; - } -} - -void adafruit_ble_send_keys(uint8_t hid_modifier_mask, uint8_t *keys, uint8_t nkeys) { - struct queue_item item; - bool didWait = false; - - item.queue_type = QTKeyReport; - item.key.modifier = hid_modifier_mask; - item.added = timer_read(); - - while (nkeys >= 0) { - item.key.keys[0] = keys[0]; - item.key.keys[1] = nkeys >= 1 ? keys[1] : 0; - item.key.keys[2] = nkeys >= 2 ? keys[2] : 0; - item.key.keys[3] = nkeys >= 3 ? keys[3] : 0; - item.key.keys[4] = nkeys >= 4 ? keys[4] : 0; - item.key.keys[5] = nkeys >= 5 ? keys[5] : 0; - - if (!send_buf.enqueue(item)) { - if (!didWait) { - dprint("wait for buf space\n"); - didWait = true; - } - send_buf_send_one(); - continue; - } - - if (nkeys <= 6) { - return; - } - - nkeys -= 6; - keys += 6; - } -} - -void adafruit_ble_send_consumer_key(uint16_t usage) { - struct queue_item item; - - item.queue_type = QTConsumer; - item.consumer = usage; - - while (!send_buf.enqueue(item)) { - send_buf_send_one(); - } -} - -#ifdef MOUSE_ENABLE -void adafruit_ble_send_mouse_move(int8_t x, int8_t y, int8_t scroll, int8_t pan, uint8_t buttons) { - struct queue_item item; - - item.queue_type = QTMouseMove; - item.mousemove.x = x; - item.mousemove.y = y; - item.mousemove.scroll = scroll; - item.mousemove.pan = pan; - item.mousemove.buttons = buttons; - - while (!send_buf.enqueue(item)) { - send_buf_send_one(); - } -} -#endif - -uint32_t adafruit_ble_read_battery_voltage(void) { return state.vbat; } - -bool adafruit_ble_set_mode_leds(bool on) { - if (!state.configured) { - return false; - } - - // The "mode" led is the red blinky one - at_command_P(on ? PSTR("AT+HWMODELED=1") : PSTR("AT+HWMODELED=0"), NULL, 0); - - // Pin 19 is the blue "connected" LED; turn that off too. - // When turning LEDs back on, don't turn that LED on if we're - // not connected, as that would be confusing. - at_command_P(on && state.is_connected ? PSTR("AT+HWGPIO=19,1") : PSTR("AT+HWGPIO=19,0"), NULL, 0); - return true; -} - -// https://learn.adafruit.com/adafruit-feather-32u4-bluefruit-le/ble-generic#at-plus-blepowerlevel -bool adafruit_ble_set_power_level(int8_t level) { - char cmd[46]; - if (!state.configured) { - return false; - } - snprintf(cmd, sizeof(cmd), "AT+BLEPOWERLEVEL=%d", level); - return at_command(cmd, NULL, 0, false); -} diff --git a/tmk_core/protocol/lufa/adafruit_ble.h b/tmk_core/protocol/lufa/adafruit_ble.h deleted file mode 100644 index b43e0771d9..0000000000 --- a/tmk_core/protocol/lufa/adafruit_ble.h +++ /dev/null @@ -1,59 +0,0 @@ -/* Bluetooth Low Energy Protocol for QMK. - * Author: Wez Furlong, 2016 - * Supports the Adafruit BLE board built around the nRF51822 chip. - */ - -#pragma once - -#include <stdbool.h> -#include <stdint.h> -#include <string.h> - -#include "config_common.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/* Instruct the module to enable HID keyboard support and reset */ -extern bool adafruit_ble_enable_keyboard(void); - -/* Query to see if the BLE module is connected */ -extern bool adafruit_ble_query_is_connected(void); - -/* Returns true if we believe that the BLE module is connected. - * This uses our cached understanding that is maintained by - * calling ble_task() periodically. */ -extern bool adafruit_ble_is_connected(void); - -/* Call this periodically to process BLE-originated things */ -extern void adafruit_ble_task(void); - -/* Generates keypress events for a set of keys. - * The hid modifier mask specifies the state of the modifier keys for - * this set of keys. - * Also sends a key release indicator, so that the keys do not remain - * held down. */ -extern void adafruit_ble_send_keys(uint8_t hid_modifier_mask, uint8_t *keys, uint8_t nkeys); - -/* Send a consumer usage. - * (milliseconds) */ -extern void adafruit_ble_send_consumer_key(uint16_t usage); - -#ifdef MOUSE_ENABLE -/* Send a mouse/wheel movement report. - * The parameters are signed and indicate positive or negative direction - * change. */ -extern void adafruit_ble_send_mouse_move(int8_t x, int8_t y, int8_t scroll, int8_t pan, uint8_t buttons); -#endif - -/* Compute battery voltage by reading an analog pin. - * Returns the integer number of millivolts */ -extern uint32_t adafruit_ble_read_battery_voltage(void); - -extern bool adafruit_ble_set_mode_leds(bool on); -extern bool adafruit_ble_set_power_level(int8_t level); - -#ifdef __cplusplus -} -#endif diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 5b56e8a03c..753762358d 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -52,6 +52,7 @@ #include "usb_descriptor.h" #include "lufa.h" #include "quantum.h" +#include "usb_device_state.h" #include <util/atomic.h> #ifdef NKRO_ENABLE @@ -142,7 +143,8 @@ static void send_keyboard(report_keyboard_t *report); static void send_mouse(report_mouse_t *report); static void send_system(uint16_t data); static void send_consumer(uint16_t data); -host_driver_t lufa_driver = {keyboard_leds, send_keyboard, send_mouse, send_system, send_consumer}; +static void send_programmable_button(uint32_t data); +host_driver_t lufa_driver = {keyboard_leds, send_keyboard, send_mouse, send_system, send_consumer, send_programmable_button}; #ifdef VIRTSER_ENABLE // clang-format off @@ -413,7 +415,10 @@ void EVENT_USB_Device_Disconnect(void) { * * FIXME: Needs doc */ -void EVENT_USB_Device_Reset(void) { print("[R]"); } +void EVENT_USB_Device_Reset(void) { + print("[R]"); + usb_device_state_set_reset(); +} /** \brief Event USB Device Connect * @@ -421,6 +426,8 @@ void EVENT_USB_Device_Reset(void) { print("[R]"); } */ void EVENT_USB_Device_Suspend() { print("[S]"); + usb_device_state_set_suspend(USB_Device_ConfigurationNumber != 0, USB_Device_ConfigurationNumber); + #ifdef SLEEP_LED_ENABLE sleep_led_enable(); #endif @@ -436,6 +443,8 @@ void EVENT_USB_Device_WakeUp() { suspend_wakeup_init(); #endif + usb_device_state_set_resume(USB_DeviceState == DEVICE_STATE_Configured, USB_Device_ConfigurationNumber); + #ifdef SLEEP_LED_ENABLE sleep_led_disable(); // NOTE: converters may not accept this @@ -528,6 +537,8 @@ void EVENT_USB_Device_ConfigurationChanged(void) { /* Setup digitizer endpoint */ ConfigSuccess &= Endpoint_ConfigureEndpoint((DIGITIZER_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, DIGITIZER_EPSIZE, 1); #endif + + usb_device_state_set_configuration(USB_DeviceState == DEVICE_STATE_Configured, USB_Device_ConfigurationNumber); } /* FIXME: Expose this table in the docs somehow @@ -760,29 +771,35 @@ static void send_mouse(report_mouse_t *report) { #endif } -/** \brief Send Extra - * - * FIXME: Needs doc - */ -#ifdef EXTRAKEY_ENABLE -static void send_extra(uint8_t report_id, uint16_t data) { +#if defined(EXTRAKEY_ENABLE) || defined(PROGRAMMABLE_BUTTON_ENABLE) +static void send_report(void *report, size_t size) { uint8_t timeout = 255; if (USB_DeviceState != DEVICE_STATE_Configured) return; - static report_extra_t r; - r = (report_extra_t){.report_id = report_id, .usage = data}; Endpoint_SelectEndpoint(SHARED_IN_EPNUM); /* Check if write ready for a polling interval around 10ms */ while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40); if (!Endpoint_IsReadWriteAllowed()) return; - Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL); + Endpoint_Write_Stream_LE(report, size, NULL); Endpoint_ClearIN(); } #endif +/** \brief Send Extra + * + * FIXME: Needs doc + */ +#ifdef EXTRAKEY_ENABLE +static void send_extra(uint8_t report_id, uint16_t data) { + static report_extra_t r; + r = (report_extra_t){.report_id = report_id, .usage = data}; + send_report(&r, sizeof(r)); +} +#endif + /** \brief Send System * * FIXME: Needs doc @@ -822,6 +839,14 @@ static void send_consumer(uint16_t data) { #endif } +static void send_programmable_button(uint32_t data) { +#ifdef PROGRAMMABLE_BUTTON_ENABLE + static report_programmable_button_t r; + r = (report_programmable_button_t){.report_id = REPORT_ID_PROGRAMMABLE_BUTTON, .usage = data}; + send_report(&r, sizeof(r)); +#endif +} + /******************************************************************************* * sendchar ******************************************************************************/ @@ -1044,6 +1069,7 @@ void protocol_setup(void) { #endif setup_mcu(); + usb_device_state_init(); keyboard_setup(); } diff --git a/tmk_core/protocol/lufa/lufa.h b/tmk_core/protocol/lufa/lufa.h index 348a84c031..6a5205609e 100644 --- a/tmk_core/protocol/lufa/lufa.h +++ b/tmk_core/protocol/lufa/lufa.h @@ -56,14 +56,3 @@ extern host_driver_t lufa_driver; #ifdef __cplusplus } #endif - -#ifdef API_ENABLE -# include "api.h" -#endif - -#ifdef API_SYSEX_ENABLE -# include "api_sysex.h" -// Allocate space for encoding overhead. -// The header and terminator are not stored to save a few bytes of precious ram -# define MIDI_SYSEX_BUFFER (API_SYSEX_MAX_SIZE + API_SYSEX_MAX_SIZE / 7 + (API_SYSEX_MAX_SIZE % 7 ? 1 : 0)) -#endif diff --git a/tmk_core/protocol/lufa/outputselect.c b/tmk_core/protocol/lufa/outputselect.c deleted file mode 100644 index f758c65280..0000000000 --- a/tmk_core/protocol/lufa/outputselect.c +++ /dev/null @@ -1,79 +0,0 @@ -/* -Copyright 2017 Priyadi Iman Nurcahyo -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "outputselect.h" - -#if defined(PROTOCOL_LUFA) -# include "lufa.h" -#endif - -#ifdef MODULE_ADAFRUIT_BLE -# include "adafruit_ble.h" -#endif - -uint8_t desired_output = OUTPUT_DEFAULT; - -/** \brief Set Output - * - * FIXME: Needs doc - */ -void set_output(uint8_t output) { - set_output_user(output); - desired_output = output; -} - -/** \brief Set Output User - * - * FIXME: Needs doc - */ -__attribute__((weak)) void set_output_user(uint8_t output) {} - -static bool is_usb_configured(void) { -#if defined(PROTOCOL_LUFA) - return USB_DeviceState == DEVICE_STATE_Configured; -#endif -} - -/** \brief Auto Detect Output - * - * FIXME: Needs doc - */ -uint8_t auto_detect_output(void) { - if (is_usb_configured()) { - return OUTPUT_USB; - } - -#ifdef MODULE_ADAFRUIT_BLE - if (adafruit_ble_is_connected()) { - return OUTPUT_BLUETOOTH; - } -#endif - -#ifdef BLUETOOTH_ENABLE - return OUTPUT_BLUETOOTH; // should check if BT is connected here -#endif - - return OUTPUT_NONE; -} - -/** \brief Where To Send - * - * FIXME: Needs doc - */ -uint8_t where_to_send(void) { - if (desired_output == OUTPUT_AUTO) { - return auto_detect_output(); - } - return desired_output; -} diff --git a/tmk_core/protocol/lufa/outputselect.h b/tmk_core/protocol/lufa/outputselect.h deleted file mode 100644 index c4548e1122..0000000000 --- a/tmk_core/protocol/lufa/outputselect.h +++ /dev/null @@ -1,34 +0,0 @@ -/* -Copyright 2017 Priyadi Iman Nurcahyo -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include <stdint.h> - -enum outputs { - OUTPUT_AUTO, - - OUTPUT_NONE, - OUTPUT_USB, - OUTPUT_BLUETOOTH -}; - -#ifndef OUTPUT_DEFAULT -# define OUTPUT_DEFAULT OUTPUT_AUTO -#endif - -void set_output(uint8_t output); -void set_output_user(uint8_t output); -uint8_t auto_detect_output(void); -uint8_t where_to_send(void); diff --git a/tmk_core/protocol/lufa/ringbuffer.hpp b/tmk_core/protocol/lufa/ringbuffer.hpp deleted file mode 100644 index 70a3c4881d..0000000000 --- a/tmk_core/protocol/lufa/ringbuffer.hpp +++ /dev/null @@ -1,66 +0,0 @@ -#pragma once -// A simple ringbuffer holding Size elements of type T -template <typename T, uint8_t Size> -class RingBuffer { - protected: - T buf_[Size]; - uint8_t head_{0}, tail_{0}; - public: - inline uint8_t nextPosition(uint8_t position) { - return (position + 1) % Size; - } - - inline uint8_t prevPosition(uint8_t position) { - if (position == 0) { - return Size - 1; - } - return position - 1; - } - - inline bool enqueue(const T &item) { - static_assert(Size > 1, "RingBuffer size must be > 1"); - uint8_t next = nextPosition(head_); - if (next == tail_) { - // Full - return false; - } - - buf_[head_] = item; - head_ = next; - return true; - } - - inline bool get(T &dest, bool commit = true) { - auto tail = tail_; - if (tail == head_) { - // No more data - return false; - } - - dest = buf_[tail]; - tail = nextPosition(tail); - - if (commit) { - tail_ = tail; - } - return true; - } - - inline bool empty() const { return head_ == tail_; } - - inline uint8_t size() const { - int diff = head_ - tail_; - if (diff >= 0) { - return diff; - } - return Size + diff; - } - - inline T& front() { - return buf_[tail_]; - } - - inline bool peek(T &item) { - return get(item, false); - } -}; diff --git a/tmk_core/protocol/midi/qmk_midi.c b/tmk_core/protocol/midi/qmk_midi.c index c18dbf9930..3a454d61ae 100644 --- a/tmk_core/protocol/midi/qmk_midi.c +++ b/tmk_core/protocol/midi/qmk_midi.c @@ -4,9 +4,6 @@ #include "midi.h" #include "usb_descriptor.h" #include "process_midi.h" -#if API_SYSEX_ENABLE -# include "api_sysex.h" -#endif /******************************************************************************* * MIDI @@ -124,41 +121,6 @@ static void cc_callback(MidiDevice* device, uint8_t chan, uint8_t num, uint8_t v // midi_send_cc(device, (chan + 1) % 16, num, val); } -#ifdef API_SYSEX_ENABLE -uint8_t midi_buffer[MIDI_SYSEX_BUFFER] = {0}; - -static void sysex_callback(MidiDevice* device, uint16_t start, uint8_t length, uint8_t* data) { - // SEND_STRING("\n"); - // send_word(start); - // SEND_STRING(": "); - // Don't store the header - int16_t pos = start - 4; - for (uint8_t place = 0; place < length; place++) { - // send_byte(*data); - if (pos >= 0) { - if (*data == 0xF7) { - // SEND_STRING("\nRD: "); - // for (uint8_t i = 0; i < start + place + 1; i++){ - // send_byte(midi_buffer[i]); - // SEND_STRING(" "); - // } - const unsigned decoded_length = sysex_decoded_length(pos); - uint8_t decoded[API_SYSEX_MAX_SIZE]; - sysex_decode(decoded, midi_buffer, pos); - process_api(decoded_length, decoded); - return; - } else if (pos >= MIDI_SYSEX_BUFFER) { - return; - } - midi_buffer[pos] = *data; - } - // SEND_STRING(" "); - data++; - pos++; - } -} -#endif - void midi_init(void); void setup_midi(void) { @@ -170,7 +132,4 @@ void setup_midi(void) { midi_device_set_pre_input_process_func(&midi_device, usb_get_midi); midi_register_fallthrough_callback(&midi_device, fallthrough_callback); midi_register_cc_callback(&midi_device, cc_callback); -#ifdef API_SYSEX_ENABLE - midi_register_sysex_callback(&midi_device, sysex_callback); -#endif } diff --git a/tmk_core/protocol/news.c b/tmk_core/protocol/news.c deleted file mode 100644 index 4463e8dd42..0000000000 --- a/tmk_core/protocol/news.c +++ /dev/null @@ -1,161 +0,0 @@ -/* -Copyright 2012 Jun WAKO <wakojun@gmail.com> - -This software is licensed with a Modified BSD License. -All of this is supposed to be Free Software, Open Source, DFSG-free, -GPL-compatible, and OK to use in both free and proprietary applications. -Additions and corrections to this file are welcome. - - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - -* Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - -* Neither the name of the copyright holders nor the names of - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. -*/ - -#include <stdbool.h> -#include <avr/io.h> -#include <avr/interrupt.h> -#include "news.h" - -void news_init(void) { NEWS_KBD_RX_INIT(); } - -// RX ring buffer -#define RBUF_SIZE 8 -static uint8_t rbuf[RBUF_SIZE]; -static uint8_t rbuf_head = 0; -static uint8_t rbuf_tail = 0; - -uint8_t news_recv(void) { - uint8_t data = 0; - if (rbuf_head == rbuf_tail) { - return 0; - } - - data = rbuf[rbuf_tail]; - rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE; - return data; -} - -// USART RX complete interrupt -ISR(NEWS_KBD_RX_VECT) { - uint8_t next = (rbuf_head + 1) % RBUF_SIZE; - if (next != rbuf_tail) { - rbuf[rbuf_head] = NEWS_KBD_RX_DATA; - rbuf_head = next; - } -} - -/* -SONY NEWS Keyboard Protocol -=========================== - -Resources ---------- - Mouse protocol of NWA-5461(Japanese) - http://groups.google.com/group/fj.sys.news/browse_thread/thread/a01b3e3ac6ae5b2d - - SONY NEWS Info(Japanese) - http://katsu.watanabe.name/doc/sonynews/ - - -Pinouts -------- - EIA 232 male connector from NWP-5461 - ------------- - \ 1 2 3 4 5 / - \ 6 7 8 9 / - --------- - 1 VCC - 2 BZ(Speaker) - 3 Keyboard Data(from keyboard MCU TxD) - 4 NC - 5 GND - 6 Unknown Input(to keyboard MCU RxD via schmitt trigger) - 7 Mouse Data(from Mouse Ext connector) - 8 Unknown Input(to Keyboard MCU Input via diode and buffer) - 9 FG - NOTE: Two LED on keyboard are controlled by pin 6,8? - - EIA 232 male connector from NWP-411A - ------------- - \ 1 2 3 4 5 / - \ 6 7 8 9 / - --------- - 1 VCC - 2 BZ(Speaker) - 3 Keyboard Data(from keyboard MCU TxD) - 4 NC - 5 GND - 6 NC - 7 Mouse Data(from Mouse Ext connector) - 8 NC - 9 FG - NOTE: These are just from my guess and not confirmed. - - -Signaling ---------- - ~~~~~~~~~~ ____XOO0X111X222X333X444X555X666X777~~~~ ~~~~~~~ - Idle Start LSB MSB Stop Idle - - Idle: High - Start bit: Low - Stop bit: High - Bit order: LSB first - - Baud rate: 9600 - Interface: TTL level(5V) UART - - NOTE: This is observed on NWP-5461 with its DIP switch all OFF. - - -Format ------- - MSB LSB - 7 6 5 4 3 2 1 0 bit - | | | | | | | | - | +-+-+-+-+-+-+-- scan code(00-7F) - +---------------- break flag: sets when released - - -Scan Codes ----------- - SONY NEWS NWP-5461 - ,---. ,------------------------, ,------------------------. ,---------. - | 7A| | 01 | 02 | 03 | 04 | 05 | | 06 | 07 | 08 | 09 | 0A | | 68 | 69 | ,-----------. - `---' `------------------------' `------------------------' `---------' | 64| 65| 52| - ,-------------------------------------------------------------. ,---. ,---------------| - | 0B| 0C| 0D| 0E| 0F| 10| 11| 12| 13| 14| 15| 16| 17| 18| 19 | | 6A| | 4B| 4C| 4D| 4E| - |-------------------------------------------------------------| |---| |---------------| - | 1A | 1B| 1C| 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| | | 6B| | 4F| 50| 51| 56| - |---------------------------------------------------------' | |---| |---------------| - | 28 | 29| 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 34| 35 | | 6C| | 53| 54| 55| | - |-------------------------------------------------------------| |---| |-----------| 5A| - | 36 | 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 42 | | 6D| | 57| 59| 58| | - |-------------------------------------------------------------| |---| |---------------| - | 43 | 44 | 45 | 46 | 47 | 48| 49| 4A | | 6E| | 66| 5B| 5C| 5D| - `-------------------------------------------------------------' `---' `---------------' -*/ diff --git a/tmk_core/protocol/news.h b/tmk_core/protocol/news.h deleted file mode 100644 index 327a13856d..0000000000 --- a/tmk_core/protocol/news.h +++ /dev/null @@ -1,48 +0,0 @@ -/* -Copyright 2012 Jun WAKO <wakojun@gmail.com> - -This software is licensed with a Modified BSD License. -All of this is supposed to be Free Software, Open Source, DFSG-free, -GPL-compatible, and OK to use in both free and proprietary applications. -Additions and corrections to this file are welcome. - - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - -* Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - -* Neither the name of the copyright holders nor the names of - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. -*/ - -#pragma once - -/* - * Primitive PS/2 Library for AVR - */ - -/* host role */ -void news_init(void); -uint8_t news_recv(void); - -/* device role */ diff --git a/tmk_core/protocol/next_kbd.c b/tmk_core/protocol/next_kbd.c deleted file mode 100644 index 6f118e6172..0000000000 --- a/tmk_core/protocol/next_kbd.c +++ /dev/null @@ -1,219 +0,0 @@ -/* - -NeXT non-ADB Keyboard Protocol - -Copyright 2013, Benjamin Gould (bgould@github.com) - -Based on: -TMK firmware code Copyright 2011,2012 Jun WAKO <wakojun@gmail.com> -Arduino code by "Ladyada" Limor Fried (http://ladyada.net/, http://adafruit.com/), released under BSD license - -Timing reference thanks to http://m0115.web.fc2.com/ (dead link), http://cfile7.uf.tistory.com/image/14448E464F410BF22380BB -Pinouts thanks to http://www.68k.org/~degs/nextkeyboard.html -Keycodes from http://ftp.netbsd.org/pub/NetBSD/NetBSD-release-6/src/sys/arch/next68k/dev/ - -This software is licensed with a Modified BSD License. -All of this is supposed to be Free Software, Open Source, DFSG-free, -GPL-compatible, and OK to use in both free and proprietary applications. -Additions and corrections to this file are welcome. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - -* Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - -* Neither the name of the copyright holders nor the names of - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. - -*/ - -#include <stdint.h> -#include <stdbool.h> -#include <util/atomic.h> -#include <util/delay.h> -#include "next_kbd.h" -#include "debug.h" - -static inline void out_lo(void); -static inline void out_hi(void); -static inline void query(void); -static inline void reset(void); -static inline uint32_t response(void); - -/* The keyboard sends signal with 50us pulse width on OUT line - * while it seems to miss the 50us pulse on In line. - * next_kbd_set_leds() often fails to sync LED status with 50us - * but it works well with 51us(+1us) on TMK converter(ATMeaga32u2) at least. - * TODO: test on Teensy and Pro Micro configuration - */ -#define out_hi_delay(intervals) \ - do { \ - out_hi(); \ - _delay_us((NEXT_KBD_TIMING + 1) * intervals); \ - } while (0); -#define out_lo_delay(intervals) \ - do { \ - out_lo(); \ - _delay_us((NEXT_KBD_TIMING + 1) * intervals); \ - } while (0); -#define query_delay(intervals) \ - do { \ - query(); \ - _delay_us((NEXT_KBD_TIMING + 1) * intervals); \ - } while (0); -#define reset_delay(intervals) \ - do { \ - reset(); \ - _delay_us((NEXT_KBD_TIMING + 1) * intervals); \ - } while (0); - -void next_kbd_init(void) { - out_hi(); - NEXT_KBD_IN_DDR &= ~(1 << NEXT_KBD_IN_BIT); // KBD_IN to input - NEXT_KBD_IN_PORT |= (1 << NEXT_KBD_IN_BIT); // KBD_IN pull up - - query_delay(5); - reset_delay(8); - - query_delay(5); - reset_delay(8); -} - -void next_kbd_set_leds(bool left, bool right) { - cli(); - out_lo_delay(9); - - out_hi_delay(3); - out_lo_delay(1); - - if (left) { - out_hi_delay(1); - } else { - out_lo_delay(1); - } - - if (right) { - out_hi_delay(1); - } else { - out_lo_delay(1); - } - - out_lo_delay(7); - out_hi(); - sei(); -} - -#define NEXT_KBD_READ (NEXT_KBD_IN_PIN & (1 << NEXT_KBD_IN_BIT)) -uint32_t next_kbd_recv(void) { - // First check to make sure that the keyboard is actually connected; - // if not, just return - // TODO: reflect the status of the keyboard in a return code - if (!NEXT_KBD_READ) { - sei(); - return 0; - } - - query(); - uint32_t resp = response(); - - return resp; -} - -static inline uint32_t response(void) { - cli(); - - // try a 5ms read; this should be called after the query method has - // been run so if a key is pressed we should get a response within - // 5ms; if not then send a reset and exit - uint8_t i = 0; - uint32_t data = 0; - uint16_t reset_timeout = 50000; - while (NEXT_KBD_READ && reset_timeout) { - asm(""); - _delay_us(1); - reset_timeout--; - } - if (!reset_timeout) { - reset(); - sei(); - return 0; - } - _delay_us(NEXT_KBD_TIMING / 2); - for (; i < 22; i++) { - if (NEXT_KBD_READ) { - data |= ((uint32_t)1 << i); - /* Note: - * My testing with the ATmega32u4 showed that there might - * something wrong with the timing here; by the end of the - * second data byte some of the modifiers can get bumped out - * to the next bit over if we just cycle through the data - * based on the expected interval. There is a bit (i = 10) - * in the middle of the data that is always on followed by - * one that is always off - so we'll use that to reset our - * timing in case we've gotten ahead of the keyboard; - */ - if (i == 10) { - i++; - while (NEXT_KBD_READ) - ; - _delay_us(NEXT_KBD_TIMING / 2); - } - } else { - /* redundant - but I don't want to remove if it might screw - * up the timing - */ - data |= ((uint32_t)0 << i); - } - _delay_us(NEXT_KBD_TIMING); - } - - sei(); - - return data; -} - -static inline void out_lo(void) { - NEXT_KBD_OUT_PORT &= ~(1 << NEXT_KBD_OUT_BIT); - NEXT_KBD_OUT_DDR |= (1 << NEXT_KBD_OUT_BIT); -} - -static inline void out_hi(void) { - /* input with pull up */ - NEXT_KBD_OUT_DDR &= ~(1 << NEXT_KBD_OUT_BIT); - NEXT_KBD_OUT_PORT |= (1 << NEXT_KBD_OUT_BIT); -} - -static inline void query(void) { - out_lo_delay(5); - out_hi_delay(1); - out_lo_delay(3); - out_hi(); -} - -static inline void reset(void) { - out_lo_delay(1); - out_hi_delay(4); - out_lo_delay(1); - out_hi_delay(6); - out_lo_delay(10); - out_hi(); -} diff --git a/tmk_core/protocol/next_kbd.h b/tmk_core/protocol/next_kbd.h deleted file mode 100644 index 1249ebf392..0000000000 --- a/tmk_core/protocol/next_kbd.h +++ /dev/null @@ -1,60 +0,0 @@ -/* -NeXT non-ADB Keyboard Protocol - -Copyright 2013, Benjamin Gould (bgould@github.com) - -Based on: -TMK firmware code Copyright 2011,2012 Jun WAKO <wakojun@gmail.com> -Arduino code by "Ladyada" Limor Fried (http://ladyada.net/, http://adafruit.com/), released under BSD license - -Timing reference thanks to http://m0115.web.fc2.com/ (dead link), http://cfile7.uf.tistory.com/image/14448E464F410BF22380BB -Pinouts thanks to http://www.68k.org/~degs/nextkeyboard.html -Keycodes from http://ftp.netbsd.org/pub/NetBSD/NetBSD-release-6/src/sys/arch/next68k/dev/ - -This software is licensed with a Modified BSD License. -All of this is supposed to be Free Software, Open Source, DFSG-free, -GPL-compatible, and OK to use in both free and proprietary applications. -Additions and corrections to this file are welcome. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - -* Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - -* Neither the name of the copyright holders nor the names of - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. - -*/ - -#pragma once - -#include <stdbool.h> - -#define NEXT_KBD_KMBUS_IDLE 0x300600 -#define NEXT_KBD_TIMING 50 - -extern uint8_t next_kbd_error; - -/* host role */ -void next_kbd_init(void); -void next_kbd_set_leds(bool left, bool right); -uint32_t next_kbd_recv(void); diff --git a/tmk_core/protocol/usb_descriptor.c b/tmk_core/protocol/usb_descriptor.c index 099964ae56..a43755f899 100644 --- a/tmk_core/protocol/usb_descriptor.c +++ b/tmk_core/protocol/usb_descriptor.c @@ -237,6 +237,25 @@ const USB_Descriptor_HIDReport_Datatype_t PROGMEM SharedReport[] = { HID_RI_END_COLLECTION(0), #endif +#ifdef PROGRAMMABLE_BUTTON_ENABLE + HID_RI_USAGE_PAGE(8, 0x0C), // Consumer + HID_RI_USAGE(8, 0x01), // Consumer Control + HID_RI_COLLECTION(8, 0x01), // Application + HID_RI_REPORT_ID(8, REPORT_ID_PROGRAMMABLE_BUTTON), + HID_RI_USAGE(8, 0x03), // Programmable Buttons + HID_RI_COLLECTION(8, 0x04), // Named Array + HID_RI_USAGE_PAGE(8, 0x09), // Button + HID_RI_USAGE_MINIMUM(8, 0x01), // Button 1 + HID_RI_USAGE_MAXIMUM(8, 0x20), // Button 32 + HID_RI_LOGICAL_MINIMUM(8, 0x00), + HID_RI_LOGICAL_MAXIMUM(8, 0x01), + HID_RI_REPORT_COUNT(8, 32), + HID_RI_REPORT_SIZE(8, 1), + HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), + HID_RI_END_COLLECTION(0), + HID_RI_END_COLLECTION(0), +#endif + #ifdef NKRO_ENABLE HID_RI_USAGE_PAGE(8, 0x01), // Generic Desktop HID_RI_USAGE(8, 0x06), // Keyboard diff --git a/tmk_core/protocol/usb_hid/parser.h b/tmk_core/protocol/usb_hid/parser.h index 036281fa66..ba35b7af5a 100644 --- a/tmk_core/protocol/usb_hid/parser.h +++ b/tmk_core/protocol/usb_hid/parser.h @@ -1,5 +1,4 @@ -#ifndef PARSER_H -#define PARSER_H +#pragma once #include "hid.h" #include "report.h" @@ -11,5 +10,3 @@ public: uint16_t time_stamp; virtual void Parse(HID *hid, bool is_rpt_id, uint8_t len, uint8_t *buf); }; - -#endif diff --git a/tmk_core/protocol/usb_hid/usb_hid.h b/tmk_core/protocol/usb_hid/usb_hid.h index 083b68d1f5..5cb5f5d035 100644 --- a/tmk_core/protocol/usb_hid/usb_hid.h +++ b/tmk_core/protocol/usb_hid/usb_hid.h @@ -1,10 +1,6 @@ -#ifndef USB_HID_H -#define USB_HID_H +#pragma once #include "report.h" - extern report_keyboard_t usb_hid_keyboard_report; extern uint16_t usb_hid_time_stamp; - -#endif diff --git a/tmk_core/protocol/vusb/vusb.c b/tmk_core/protocol/vusb/vusb.c index 485b20c900..e4db5d0654 100644 --- a/tmk_core/protocol/vusb/vusb.c +++ b/tmk_core/protocol/vusb/vusb.c @@ -226,8 +226,9 @@ static void send_keyboard(report_keyboard_t *report); static void send_mouse(report_mouse_t *report); static void send_system(uint16_t data); static void send_consumer(uint16_t data); +static void send_programmable_button(uint32_t data); -static host_driver_t driver = {keyboard_leds, send_keyboard, send_mouse, send_system, send_consumer}; +static host_driver_t driver = {keyboard_leds, send_keyboard, send_mouse, send_system, send_consumer, send_programmable_button}; host_driver_t *vusb_driver(void) { return &driver; } @@ -296,6 +297,19 @@ void send_digitizer(report_digitizer_t *report) { #ifdef DIGITIZER_ENABLE if (usbInterruptIsReadyShared()) { usbSetInterruptShared((void *)report, sizeof(report_digitizer_t)); +#endif +} + +static void send_programmable_button(uint32_t data) { +#ifdef PROGRAMMABLE_BUTTON_ENABLE + static report_programmable_button_t report = { + .report_id = REPORT_ID_PROGRAMMABLE_BUTTON, + }; + + report.usage = data; + + if (usbInterruptIsReadyShared()) { + usbSetInterruptShared((void *)&report, sizeof(report)); } #endif } @@ -558,6 +572,26 @@ const PROGMEM uchar shared_hid_report[] = { 0xC0 // End Collection #endif +#ifdef PROGRAMMABLE_BUTTON_ENABLE + // Programmable buttons report descriptor + 0x05, 0x0C, // Usage Page (Consumer) + 0x09, 0x01, // Usage (Consumer Control) + 0xA1, 0x01, // Collection (Application) + 0x85, REPORT_ID_PROGRAMMABLE_BUTTON, // Report ID + 0x09, 0x03, // Usage (Programmable Buttons) + 0xA1, 0x04, // Collection (Named Array) + 0x05, 0x09, // Usage Page (Button) + 0x19, 0x01, // Usage Minimum (Button 1) + 0x29, 0x20, // Usage Maximum (Button 32) + 0x15, 0x00, // Logical Minimum (0) + 0x25, 0x01, // Logical Maximum (1) + 0x95, 0x20, // Report Count (32) + 0x75, 0x01, // Report Size (1) + 0x81, 0x02, // Input (Data, Variable, Absolute) + 0xC0, // End Collection + 0xC0 // End Collection +#endif + #ifdef SHARED_EP_ENABLE }; #endif |