diff options
Diffstat (limited to 'tmk_core/tool/mbed/mbed-sdk/libraries/dsp/cmsis_dsp/FilteringFunctions/arm_fir_sparse_q15.c')
-rw-r--r-- | tmk_core/tool/mbed/mbed-sdk/libraries/dsp/cmsis_dsp/FilteringFunctions/arm_fir_sparse_q15.c | 411 |
1 files changed, 411 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/dsp/cmsis_dsp/FilteringFunctions/arm_fir_sparse_q15.c b/tmk_core/tool/mbed/mbed-sdk/libraries/dsp/cmsis_dsp/FilteringFunctions/arm_fir_sparse_q15.c new file mode 100644 index 0000000000..bd363bb567 --- /dev/null +++ b/tmk_core/tool/mbed/mbed-sdk/libraries/dsp/cmsis_dsp/FilteringFunctions/arm_fir_sparse_q15.c @@ -0,0 +1,411 @@ +/* ---------------------------------------------------------------------- +* Copyright (C) 2010-2013 ARM Limited. All rights reserved. +* +* $Date: 17. January 2013 +* $Revision: V1.4.1 +* +* Project: CMSIS DSP Library +* Title: arm_fir_sparse_q15.c +* +* Description: Q15 sparse FIR filter processing function. +* +* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0 +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* - Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* - Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in +* the documentation and/or other materials provided with the +* distribution. +* - Neither the name of ARM LIMITED nor the names of its contributors +* may be used to endorse or promote products derived from this +* software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +* POSSIBILITY OF SUCH DAMAGE. +* ------------------------------------------------------------------- */ +#include "arm_math.h" + +/** + * @addtogroup FIR_Sparse + * @{ + */ + +/** + * @brief Processing function for the Q15 sparse FIR filter. + * @param[in] *S points to an instance of the Q15 sparse FIR structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] *pScratchIn points to a temporary buffer of size blockSize. + * @param[in] *pScratchOut points to a temporary buffer of size blockSize. + * @param[in] blockSize number of input samples to process per call. + * @return none. + * + * <b>Scaling and Overflow Behavior:</b> + * \par + * The function is implemented using an internal 32-bit accumulator. + * The 1.15 x 1.15 multiplications yield a 2.30 result and these are added to a 2.30 accumulator. + * Thus the full precision of the multiplications is maintained but there is only a single guard bit in the accumulator. + * If the accumulator result overflows it will wrap around rather than saturate. + * After all multiply-accumulates are performed, the 2.30 accumulator is truncated to 2.15 format and then saturated to 1.15 format. + * In order to avoid overflows the input signal or coefficients must be scaled down by log2(numTaps) bits. + */ + + +void arm_fir_sparse_q15( + arm_fir_sparse_instance_q15 * S, + q15_t * pSrc, + q15_t * pDst, + q15_t * pScratchIn, + q31_t * pScratchOut, + uint32_t blockSize) +{ + + q15_t *pState = S->pState; /* State pointer */ + q15_t *pIn = pSrc; /* Working pointer for input */ + q15_t *pOut = pDst; /* Working pointer for output */ + q15_t *pCoeffs = S->pCoeffs; /* Coefficient pointer */ + q15_t *px; /* Temporary pointers for scratch buffer */ + q15_t *pb = pScratchIn; /* Temporary pointers for scratch buffer */ + q15_t *py = pState; /* Temporary pointers for state buffer */ + int32_t *pTapDelay = S->pTapDelay; /* Pointer to the array containing offset of the non-zero tap values. */ + uint32_t delaySize = S->maxDelay + blockSize; /* state length */ + uint16_t numTaps = S->numTaps; /* Filter order */ + int32_t readIndex; /* Read index of the state buffer */ + uint32_t tapCnt, blkCnt; /* loop counters */ + q15_t coeff = *pCoeffs++; /* Read the first coefficient value */ + q31_t *pScr2 = pScratchOut; /* Working pointer for pScratchOut */ + + +#ifndef ARM_MATH_CM0_FAMILY + + /* Run the below code for Cortex-M4 and Cortex-M3 */ + + q31_t in1, in2; /* Temporary variables */ + + + /* BlockSize of Input samples are copied into the state buffer */ + /* StateIndex points to the starting position to write in the state buffer */ + arm_circularWrite_q15(py, delaySize, &S->stateIndex, 1, pIn, 1, blockSize); + + /* Loop over the number of taps. */ + tapCnt = numTaps; + + /* Read Index, from where the state buffer should be read, is calculated. */ + readIndex = (S->stateIndex - blockSize) - *pTapDelay++; + + /* Wraparound of readIndex */ + if(readIndex < 0) + { + readIndex += (int32_t) delaySize; + } + + /* Working pointer for state buffer is updated */ + py = pState; + + /* blockSize samples are read from the state buffer */ + arm_circularRead_q15(py, delaySize, &readIndex, 1, + pb, pb, blockSize, 1, blockSize); + + /* Working pointer for the scratch buffer of state values */ + px = pb; + + /* Working pointer for scratch buffer of output values */ + pScratchOut = pScr2; + + /* Loop over the blockSize. Unroll by a factor of 4. + * Compute 4 multiplications at a time. */ + blkCnt = blockSize >> 2; + + while(blkCnt > 0u) + { + /* Perform multiplication and store in the scratch buffer */ + *pScratchOut++ = ((q31_t) * px++ * coeff); + *pScratchOut++ = ((q31_t) * px++ * coeff); + *pScratchOut++ = ((q31_t) * px++ * coeff); + *pScratchOut++ = ((q31_t) * px++ * coeff); + + /* Decrement the loop counter */ + blkCnt--; + } + + /* If the blockSize is not a multiple of 4, + * compute the remaining samples */ + blkCnt = blockSize % 0x4u; + + while(blkCnt > 0u) + { + /* Perform multiplication and store in the scratch buffer */ + *pScratchOut++ = ((q31_t) * px++ * coeff); + + /* Decrement the loop counter */ + blkCnt--; + } + + /* Load the coefficient value and + * increment the coefficient buffer for the next set of state values */ + coeff = *pCoeffs++; + + /* Read Index, from where the state buffer should be read, is calculated. */ + readIndex = (S->stateIndex - blockSize) - *pTapDelay++; + + /* Wraparound of readIndex */ + if(readIndex < 0) + { + readIndex += (int32_t) delaySize; + } + + /* Loop over the number of taps. */ + tapCnt = (uint32_t) numTaps - 1u; + + while(tapCnt > 0u) + { + /* Working pointer for state buffer is updated */ + py = pState; + + /* blockSize samples are read from the state buffer */ + arm_circularRead_q15(py, delaySize, &readIndex, 1, + pb, pb, blockSize, 1, blockSize); + + /* Working pointer for the scratch buffer of state values */ + px = pb; + + /* Working pointer for scratch buffer of output values */ + pScratchOut = pScr2; + + /* Loop over the blockSize. Unroll by a factor of 4. + * Compute 4 MACS at a time. */ + blkCnt = blockSize >> 2; + + while(blkCnt > 0u) + { + /* Perform Multiply-Accumulate */ + *pScratchOut++ += (q31_t) * px++ * coeff; + *pScratchOut++ += (q31_t) * px++ * coeff; + *pScratchOut++ += (q31_t) * px++ * coeff; + *pScratchOut++ += (q31_t) * px++ * coeff; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* If the blockSize is not a multiple of 4, + * compute the remaining samples */ + blkCnt = blockSize % 0x4u; + + while(blkCnt > 0u) + { + /* Perform Multiply-Accumulate */ + *pScratchOut++ += (q31_t) * px++ * coeff; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* Load the coefficient value and + * increment the coefficient buffer for the next set of state values */ + coeff = *pCoeffs++; + + /* Read Index, from where the state buffer should be read, is calculated. */ + readIndex = (S->stateIndex - blockSize) - *pTapDelay++; + + /* Wraparound of readIndex */ + if(readIndex < 0) + { + readIndex += (int32_t) delaySize; + } + + /* Decrement the tap loop counter */ + tapCnt--; + } + + /* All the output values are in pScratchOut buffer. + Convert them into 1.15 format, saturate and store in the destination buffer. */ + /* Loop over the blockSize. */ + blkCnt = blockSize >> 2; + + while(blkCnt > 0u) + { + in1 = *pScr2++; + in2 = *pScr2++; + +#ifndef ARM_MATH_BIG_ENDIAN + + *__SIMD32(pOut)++ = + __PKHBT((q15_t) __SSAT(in1 >> 15, 16), (q15_t) __SSAT(in2 >> 15, 16), + 16); + +#else + *__SIMD32(pOut)++ = + __PKHBT((q15_t) __SSAT(in2 >> 15, 16), (q15_t) __SSAT(in1 >> 15, 16), + 16); + +#endif /* #ifndef ARM_MATH_BIG_ENDIAN */ + + in1 = *pScr2++; + + in2 = *pScr2++; + +#ifndef ARM_MATH_BIG_ENDIAN + + *__SIMD32(pOut)++ = + __PKHBT((q15_t) __SSAT(in1 >> 15, 16), (q15_t) __SSAT(in2 >> 15, 16), + 16); + +#else + + *__SIMD32(pOut)++ = + __PKHBT((q15_t) __SSAT(in2 >> 15, 16), (q15_t) __SSAT(in1 >> 15, 16), + 16); + +#endif /* #ifndef ARM_MATH_BIG_ENDIAN */ + + + blkCnt--; + + } + + /* If the blockSize is not a multiple of 4, + remaining samples are processed in the below loop */ + blkCnt = blockSize % 0x4u; + + while(blkCnt > 0u) + { + *pOut++ = (q15_t) __SSAT(*pScr2++ >> 15, 16); + blkCnt--; + } + +#else + + /* Run the below code for Cortex-M0 */ + + /* BlockSize of Input samples are copied into the state buffer */ + /* StateIndex points to the starting position to write in the state buffer */ + arm_circularWrite_q15(py, delaySize, &S->stateIndex, 1, pIn, 1, blockSize); + + /* Loop over the number of taps. */ + tapCnt = numTaps; + + /* Read Index, from where the state buffer should be read, is calculated. */ + readIndex = (S->stateIndex - blockSize) - *pTapDelay++; + + /* Wraparound of readIndex */ + if(readIndex < 0) + { + readIndex += (int32_t) delaySize; + } + + /* Working pointer for state buffer is updated */ + py = pState; + + /* blockSize samples are read from the state buffer */ + arm_circularRead_q15(py, delaySize, &readIndex, 1, + pb, pb, blockSize, 1, blockSize); + + /* Working pointer for the scratch buffer of state values */ + px = pb; + + /* Working pointer for scratch buffer of output values */ + pScratchOut = pScr2; + + blkCnt = blockSize; + + while(blkCnt > 0u) + { + /* Perform multiplication and store in the scratch buffer */ + *pScratchOut++ = ((q31_t) * px++ * coeff); + + /* Decrement the loop counter */ + blkCnt--; + } + + /* Load the coefficient value and + * increment the coefficient buffer for the next set of state values */ + coeff = *pCoeffs++; + + /* Read Index, from where the state buffer should be read, is calculated. */ + readIndex = (S->stateIndex - blockSize) - *pTapDelay++; + + /* Wraparound of readIndex */ + if(readIndex < 0) + { + readIndex += (int32_t) delaySize; + } + + /* Loop over the number of taps. */ + tapCnt = (uint32_t) numTaps - 1u; + + while(tapCnt > 0u) + { + /* Working pointer for state buffer is updated */ + py = pState; + + /* blockSize samples are read from the state buffer */ + arm_circularRead_q15(py, delaySize, &readIndex, 1, + pb, pb, blockSize, 1, blockSize); + + /* Working pointer for the scratch buffer of state values */ + px = pb; + + /* Working pointer for scratch buffer of output values */ + pScratchOut = pScr2; + + blkCnt = blockSize; + + while(blkCnt > 0u) + { + /* Perform Multiply-Accumulate */ + *pScratchOut++ += (q31_t) * px++ * coeff; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* Load the coefficient value and + * increment the coefficient buffer for the next set of state values */ + coeff = *pCoeffs++; + + /* Read Index, from where the state buffer should be read, is calculated. */ + readIndex = (S->stateIndex - blockSize) - *pTapDelay++; + + /* Wraparound of readIndex */ + if(readIndex < 0) + { + readIndex += (int32_t) delaySize; + } + + /* Decrement the tap loop counter */ + tapCnt--; + } + + /* All the output values are in pScratchOut buffer. + Convert them into 1.15 format, saturate and store in the destination buffer. */ + /* Loop over the blockSize. */ + blkCnt = blockSize; + + while(blkCnt > 0u) + { + *pOut++ = (q15_t) __SSAT(*pScr2++ >> 15, 16); + blkCnt--; + } + +#endif /* #ifndef ARM_MATH_CM0_FAMILY */ + +} + +/** + * @} end of FIR_Sparse group + */ |