diff options
Diffstat (limited to 'tmk_core/protocol')
| -rw-r--r-- | tmk_core/protocol/adb.c | 256 | ||||
| -rw-r--r-- | tmk_core/protocol/adb.h | 58 | ||||
| -rw-r--r-- | tmk_core/protocol/arm_atsam/i2c_master.c | 3 | ||||
| -rw-r--r-- | tmk_core/protocol/arm_atsam/i2c_master.h | 4 | ||||
| -rw-r--r-- | tmk_core/protocol/arm_atsam/main_arm_atsam.c | 3 |
5 files changed, 234 insertions, 90 deletions
diff --git a/tmk_core/protocol/adb.c b/tmk_core/protocol/adb.c index a23c919619..367f1b09fa 100644 --- a/tmk_core/protocol/adb.c +++ b/tmk_core/protocol/adb.c @@ -1,5 +1,5 @@ /* -Copyright 2011 Jun WAKO <wakojun@gmail.com> +Copyright 2011-19 Jun WAKO <wakojun@gmail.com> Copyright 2013 Shay Green <gblargg@gmail.com> This software is licensed with a Modified BSD License. @@ -41,6 +41,7 @@ POSSIBILITY OF SUCH DAMAGE. #include <avr/io.h> #include <avr/interrupt.h> #include "adb.h" +#include "print.h" // GCC doesn't inline functions normally #define data_lo() (ADB_DDR |= (1 << ADB_DATA_BIT)) @@ -59,7 +60,6 @@ static inline void place_bit1(void); static inline void send_byte(uint8_t data); static inline uint16_t wait_data_lo(uint16_t us); static inline uint16_t wait_data_hi(uint16_t us); -static inline uint16_t adb_host_dev_recv(uint8_t device); void adb_host_init(void) { ADB_PORT &= ~(1 << ADB_DATA_BIT); @@ -81,119 +81,164 @@ bool adb_host_psw(void) { return psw_in(); } * <http://geekhack.org/index.php?topic=14290.msg1068919#msg1068919> * <http://geekhack.org/index.php?topic=14290.msg1070139#msg1070139> */ - -// ADB Bit Cells -// -// bit cell time: 70-130us -// low part of bit0: 60-70% of bit cell -// low part of bit1: 30-40% of bit cell -// -// bit cell time 70us 130us -// -------------------------------------------- -// low part of bit0 42-49 78-91 -// high part of bit0 21-28 39-52 -// low part of bit1 21-28 39-52 -// high part of bit1 42-49 78-91 -// -// -// bit0: -// 70us bit cell: -// ____________~~~~~~ -// 42-49 21-28 -// -// 130us bit cell: -// ____________~~~~~~ -// 78-91 39-52 -// -// bit1: -// 70us bit cell: -// ______~~~~~~~~~~~~ -// 21-28 42-49 -// -// 130us bit cell: -// ______~~~~~~~~~~~~ -// 39-52 78-91 -// -// [from Apple IIgs Hardware Reference Second Edition] - -enum { ADDR_KEYB = 0x20, ADDR_MOUSE = 0x30 }; - -uint16_t adb_host_kbd_recv(void) { return adb_host_dev_recv(ADDR_KEYB); } +uint16_t adb_host_kbd_recv(void) { return adb_host_talk(ADB_ADDR_KEYBOARD, ADB_REG_0); } #ifdef ADB_MOUSE_ENABLE -void adb_mouse_init(void) { return; } +__attribute__((weak)) void adb_mouse_init(void) { return; } + +__attribute__((weak)) void adb_mouse_task(void) { return; } -uint16_t adb_host_mouse_recv(void) { return adb_host_dev_recv(ADDR_MOUSE); } +uint16_t adb_host_mouse_recv(void) { return adb_host_talk(ADB_ADDR_MOUSE, ADB_REG_0); } #endif -static inline uint16_t adb_host_dev_recv(uint8_t device) { - uint16_t data = 0; +// This sends Talk command to read data from register and returns length of the data. +uint8_t adb_host_talk_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len) { + for (int8_t i = 0; i < len; i++) buf[i] = 0; + cli(); attention(); - send_byte(device | 0x0C); // Addr:Keyboard(0010)/Mouse(0011), Cmd:Talk(11), Register0(00) - place_bit0(); // Stopbit(0) + send_byte((addr << 4) | ADB_CMD_TALK | reg); + place_bit0(); // Stopbit(0) + // TODO: Service Request(Srq): + // Device holds low part of comannd stopbit for 140-260us + // + // Command: + // ......._ ______________________ ___ ............_ ------- + // | | | | | | | + // Command | | | | | Data bytes | | + // ........|___| | 140-260 |__| |_............|___| + // |stop0 | Tlt Stop-to-Start |start1| |stop0 | + // + // Command without data: + // ......._ __________________________ + // | | + // Command | | + // ........|___| | 140-260 | + // |stop0 | Tlt Stop-to-Start | + // + // Service Request: + // ......._ ______ ___ ............_ ------- + // | 140-260 | | | | | | + // Command | Service Request | | | | Data bytes | | + // ........|___________________| |__| |_............|___| + // |stop0 | |start1| |stop0 | + // ......._ __________ + // | 140-260 | + // Command | Service Request | + // ........|___________________| + // |stop0 | + // This can be happened? + // ......._ ______________________ ___ ............_ ----- + // | | | | | | 140-260 | + // Command | | | | | Data bytes | Service Request | + // ........|___| | 140-260 |__| |_............|_________________| + // |stop0 | Tlt Stop-to-Start |start1| |stop0 | + // + // "Service requests are issued by the devices during a very specific time at the + // end of the reception of the command packet. + // If a device in need of service issues a service request, it must do so within + // the 65 µs of the Stop Bit’s low time and maintain the line low for a total of 300 µs." + // + // "A device sends a Service Request signal by holding the bus low during the low + // portion of the stop bit of any command or data transaction. The device must lengthen + // the stop by a minimum of 140 J.lS beyond its normal duration, as shown in Figure 8-15." + // http://ww1.microchip.com/downloads/en/AppNotes/00591b.pdf if (!wait_data_hi(500)) { // Service Request(310us Adjustable Keyboard): just ignored + xprintf("R"); sei(); - return -30; // something wrong + return 0; } if (!wait_data_lo(500)) { // Tlt/Stop to Start(140-260us) sei(); - return 0; // No data to send + return 0; // No data from device(not error); + } + + // start bit(1) + if (!wait_data_hi(40)) { + xprintf("S"); + sei(); + return 0; + } + if (!wait_data_lo(100)) { + xprintf("s"); + sei(); + return 0; } - uint8_t n = 17; // start bit + 16 data bits + uint8_t n = 0; // bit count do { + // + // |<- bit_cell_max(130) ->| + // | |<- lo ->| + // | | |<-hi->| + // _______ + // | | | + // | 130-lo | lo-hi | + // |________| | + // uint8_t lo = (uint8_t)wait_data_hi(130); - if (!lo) goto error; + if (!lo) goto error; // no more bit or after stop bit uint8_t hi = (uint8_t)wait_data_lo(lo); - if (!hi) goto error; + if (!hi) goto error; // stop bit extedned by Srq? - hi = lo - hi; - lo = 130 - lo; + if (n / 8 >= len) continue; // can't store in buf - data <<= 1; - if (lo < hi) { - data |= 1; - } else if (n == 17) { - sei(); - return -20; + buf[n / 8] <<= 1; + if ((130 - lo) < (lo - hi)) { + buf[n / 8] |= 1; } - } while (--n); - - // Stop bit can't be checked normally since it could have service request lenghtening - // and its high state never goes low. - if (!wait_data_hi(351) || wait_data_lo(91)) { - sei(); - return -21; - } - sei(); - return data; + } while (++n); error: sei(); - return -n; + return n / 8; } -void adb_host_listen(uint8_t cmd, uint8_t data_h, uint8_t data_l) { +uint16_t adb_host_talk(uint8_t addr, uint8_t reg) { + uint8_t len; + uint8_t buf[8]; + len = adb_host_talk_buf(addr, reg, buf, 8); + if (len != 2) return 0; + return (buf[0] << 8 | buf[1]); +} + +void adb_host_listen_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len) { cli(); attention(); - send_byte(cmd); - place_bit0(); // Stopbit(0) + send_byte((addr << 4) | ADB_CMD_LISTEN | reg); + place_bit0(); // Stopbit(0) + // TODO: Service Request _delay_us(200); // Tlt/Stop to Start place_bit1(); // Startbit(1) - send_byte(data_h); - send_byte(data_l); + for (int8_t i = 0; i < len; i++) { + send_byte(buf[i]); + // xprintf("%02X ", buf[i]); + } place_bit0(); // Stopbit(0); sei(); } +void adb_host_listen(uint8_t addr, uint8_t reg, uint8_t data_h, uint8_t data_l) { + uint8_t buf[2] = {data_h, data_l}; + adb_host_listen_buf(addr, reg, buf, 2); +} + +void adb_host_flush(uint8_t addr) { + cli(); + attention(); + send_byte((addr << 4) | ADB_CMD_FLUSH); + place_bit0(); // Stopbit(0) + _delay_us(200); // Tlt/Stop to Start + sei(); +} + // send state of LEDs void adb_host_kbd_led(uint8_t led) { - // Addr:Keyboard(0010), Cmd:Listen(10), Register2(10) - // send upper byte (not used) - // send lower byte (bit2: ScrollLock, bit1: CapsLock, bit0: - adb_host_listen(0x2A, 0, led & 0x07); + // Listen Register2 + // upper byte: not used + // lower byte: bit2=ScrollLock, bit1=CapsLock, bit0=NumLock + adb_host_listen(ADB_ADDR_KEYBOARD, ADB_REG_2, 0, led & 0x07); } #ifdef ADB_PSW_BIT @@ -327,7 +372,7 @@ Commands bits commands ------------------------------------------------------ - - - - - 0 0 0 0 Send Request(reset all devices) + - - - - 0 0 0 0 Send Reset(reset all devices) A A A A 0 0 0 1 Flush(reset a device) - - - - 0 0 1 0 Reserved - - - - 0 0 1 1 Reserved @@ -435,5 +480,56 @@ Keyboard LEDs & state of keys(Register2) | +----------------------------- Delete +------------------------------- Reserved +Address, Handler ID and bits(Register3) + 1514131211 . . 8 7 . . . . . . 0 + | | | | | | | | | | | | | | | | + | | | | | | | | +-+-+-+-+-+-+-+- Handler ID + | | | | +-+-+-+----------------- Address + | | | +------------------------- 0 + | | +--------------------------- Service request enable(1 = enabled) + | +----------------------------- Exceptional event(alwyas 1 if not used) + +------------------------------- 0 + +ADB Bit Cells + bit cell time: 70-130us + low part of bit0: 60-70% of bit cell + low part of bit1: 30-40% of bit cell + + bit cell time 70us 130us + -------------------------------------------- + low part of bit0 42-49 78-91 + high part of bit0 21-28 39-52 + low part of bit1 21-28 39-52 + high part of bit1 42-49 78-91 + + + bit0: + 70us bit cell: + ____________~~~~~~ + 42-49 21-28 + + 130us bit cell: + ____________~~~~~~ + 78-91 39-52 + + bit1: + 70us bit cell: + ______~~~~~~~~~~~~ + 21-28 42-49 + + 130us bit cell: + ______~~~~~~~~~~~~ + 39-52 78-91 + + [from Apple IIgs Hardware Reference Second Edition] + +Keyboard Handle ID + Apple Standard Keyboard M0116: 0x01 + Apple Extended Keyboard M0115: 0x02 + Apple Extended Keyboard II M3501: 0x02 + Apple Adjustable Keybaord: 0x10 + + http://lxr.free-electrons.com/source/drivers/macintosh/adbhid.c?v=4.4#L802 + END_OF_ADB */ diff --git a/tmk_core/protocol/adb.h b/tmk_core/protocol/adb.h index 34cbcf7691..fe8becc2d5 100644 --- a/tmk_core/protocol/adb.h +++ b/tmk_core/protocol/adb.h @@ -1,5 +1,5 @@ /* -Copyright 2011 Jun WAKO <wakojun@gmail.com> +Copyright 2011-19 Jun WAKO <wakojun@gmail.com> This software is licensed with a Modified BSD License. All of this is supposed to be Free Software, Open Source, DFSG-free, @@ -47,12 +47,60 @@ POSSIBILITY OF SUCH DAMAGE. #define ADB_POWER 0x7F #define ADB_CAPS 0x39 +/* ADB commands */ +// Default Address +#define ADB_ADDR_0 0 +#define ADB_ADDR_DONGLE 1 +#define ADB_ADDR_KEYBOARD 2 +#define ADB_ADDR_MOUSE 3 +#define ADB_ADDR_TABLET 4 +#define ADB_ADDR_APPLIANCE 7 +#define ADB_ADDR_8 8 +#define ADB_ADDR_9 9 +#define ADB_ADDR_10 10 +#define ADB_ADDR_11 11 +#define ADB_ADDR_12 12 +#define ADB_ADDR_13 13 +#define ADB_ADDR_14 14 +#define ADB_ADDR_15 15 +// for temporary purpose, do not use for polling +#define ADB_ADDR_TMP 15 +#define ADB_ADDR_MOUSE_POLL 10 +// Command Type +#define ADB_CMD_RESET 0 +#define ADB_CMD_FLUSH 1 +#define ADB_CMD_LISTEN 8 +#define ADB_CMD_TALK 12 +// Register +#define ADB_REG_0 0 +#define ADB_REG_1 1 +#define ADB_REG_2 2 +#define ADB_REG_3 3 + +/* ADB keyboard handler id */ +#define ADB_HANDLER_STD 0x01 /* IIGS, M0116 */ +#define ADB_HANDLER_AEK 0x02 /* M0115, M3501 */ +#define ADB_HANDLER_AEK_RMOD 0x03 /* M0115, M3501, alternate mode enableing right modifiers */ +#define ADB_HANDLER_STD_ISO 0x04 /* M0118, ISO swapping keys */ +#define ADB_HANDLER_AEK_ISO 0x05 /* M0115, M3501, ISO swapping keys */ +#define ADB_HANDLER_M1242_ANSI 0x10 /* Adjustable keyboard */ +#define ADB_HANDLER_CLASSIC1_MOUSE 0x01 +#define ADB_HANDLER_CLASSIC2_MOUSE 0x02 +#define ADB_HANDLER_EXTENDED_MOUSE 0x04 +#define ADB_HANDLER_TURBO_MOUSE 0x32 + // ADB host void adb_host_init(void); bool adb_host_psw(void); +uint16_t adb_host_talk(uint8_t addr, uint8_t reg); +uint8_t adb_host_talk_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len); +void adb_host_listen(uint8_t addr, uint8_t reg, uint8_t data_h, uint8_t data_l); +void adb_host_listen_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len); +void adb_host_flush(uint8_t addr); +void adb_host_kbd_led(uint8_t led); uint16_t adb_host_kbd_recv(void); uint16_t adb_host_mouse_recv(void); -void adb_host_listen(uint8_t cmd, uint8_t data_h, uint8_t data_l); -void adb_host_kbd_led(uint8_t led); -void adb_mouse_task(void); -void adb_mouse_init(void); + +// ADB Mouse +void adb_mouse_task(void); +void adb_mouse_init(void); diff --git a/tmk_core/protocol/arm_atsam/i2c_master.c b/tmk_core/protocol/arm_atsam/i2c_master.c index d3319ab447..dda2f85b00 100644 --- a/tmk_core/protocol/arm_atsam/i2c_master.c +++ b/tmk_core/protocol/arm_atsam/i2c_master.c @@ -28,6 +28,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define I2C_LED_USE_DMA 1 // Set 1 to use background DMA transfers for leds, Set 0 to use inline software transfers +DmacDescriptor dmac_desc; +DmacDescriptor dmac_desc_wb; + static uint8_t i2c_led_q[I2C_Q_SIZE]; // I2C queue circular buffer static uint8_t i2c_led_q_s; // Start of circular buffer static uint8_t i2c_led_q_e; // End of circular buffer diff --git a/tmk_core/protocol/arm_atsam/i2c_master.h b/tmk_core/protocol/arm_atsam/i2c_master.h index 44dbdfbffa..68773f213f 100644 --- a/tmk_core/protocol/arm_atsam/i2c_master.h +++ b/tmk_core/protocol/arm_atsam/i2c_master.h @@ -24,8 +24,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # include "issi3733_driver.h" # include "config.h" -__attribute__((__aligned__(16))) DmacDescriptor dmac_desc; -__attribute__((__aligned__(16))) DmacDescriptor dmac_desc_wb; +extern __attribute__((__aligned__(16))) DmacDescriptor dmac_desc; +extern __attribute__((__aligned__(16))) DmacDescriptor dmac_desc_wb; uint8_t I2C3733_Init_Control(void); uint8_t I2C3733_Init_Drivers(void); diff --git a/tmk_core/protocol/arm_atsam/main_arm_atsam.c b/tmk_core/protocol/arm_atsam/main_arm_atsam.c index e10be52fb8..a3d1f34496 100644 --- a/tmk_core/protocol/arm_atsam/main_arm_atsam.c +++ b/tmk_core/protocol/arm_atsam/main_arm_atsam.c @@ -306,9 +306,6 @@ int main(void) { } #endif // CONSOLE_ENABLE - // Run housekeeping - housekeeping_task_kb(); - housekeeping_task_user(); } return 1; |