diff options
Diffstat (limited to 'tmk_core/protocol/vusb')
-rw-r--r-- | tmk_core/protocol/vusb/main.c | 37 | ||||
-rw-r--r-- | tmk_core/protocol/vusb/sendchar_usart.c | 19 | ||||
-rw-r--r-- | tmk_core/protocol/vusb/vusb.c | 102 |
3 files changed, 53 insertions, 105 deletions
diff --git a/tmk_core/protocol/vusb/main.c b/tmk_core/protocol/vusb/main.c index b4063273da..a57df5ce06 100644 --- a/tmk_core/protocol/vusb/main.c +++ b/tmk_core/protocol/vusb/main.c @@ -7,19 +7,22 @@ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) * This Revision: $Id: main.c 790 2010-05-30 21:00:26Z cs $ */ + #include <stdint.h> + #include <avr/interrupt.h> +#include <avr/power.h> #include <avr/wdt.h> #include <avr/sleep.h> -#include <util/delay.h> + #include <usbdrv/usbdrv.h> -#include <usbdrv/oddebug.h> + #include "vusb.h" + #include "keyboard.h" #include "host.h" #include "timer.h" -#include "uart.h" -#include "debug.h" +#include "print.h" #include "suspend.h" #include "wait.h" #include "sendchar.h" @@ -28,8 +31,6 @@ # include "sleep_led.h" #endif -#define UART_BAUD_RATE 115200 - #ifdef CONSOLE_ENABLE void console_task(void); #endif @@ -47,7 +48,7 @@ static void initForUsbConnectivity(void) { usbDeviceDisconnect(); /* do this while interrupts are disabled */ while (--i) { /* fake USB disconnect for > 250 ms */ wdt_reset(); - _delay_ms(1); + wait_ms(1); } usbDeviceConnect(); } @@ -60,7 +61,7 @@ static void usb_remote_wakeup(void) { USBDDR = ddr_orig | USBMASK; USBOUT ^= USBMASK; - _delay_ms(25); + wait_ms(25); USBOUT ^= USBMASK; USBDDR = ddr_orig; @@ -74,7 +75,6 @@ static void usb_remote_wakeup(void) { * FIXME: Needs doc */ static void setup_usb(void) { - // debug("initForUsbConnectivity()\n"); initForUsbConnectivity(); // for Console_Task @@ -95,10 +95,7 @@ int main(void) { #ifdef CLKPR // avoid unintentional changes of clock frequency in devices that have a // clock prescaler - CLKPR = 0x80, CLKPR = 0; -#endif -#ifndef NO_UART - uart_init(UART_BAUD_RATE); + clock_prescale_set(clock_div_1); #endif keyboard_setup(); @@ -113,7 +110,6 @@ int main(void) { sleep_led_init(); #endif - debug("main loop\n"); while (1) { #if USB_COUNT_SOF if (usbSofCount != 0) { @@ -130,19 +126,6 @@ int main(void) { # ifdef SLEEP_LED_ENABLE sleep_led_enable(); # endif - /* - uart_putchar('S'); - _delay_ms(1); - cli(); - set_sleep_mode(SLEEP_MODE_PWR_DOWN); - sleep_enable(); - sleep_bod_disable(); - sei(); - sleep_cpu(); - sleep_disable(); - _delay_ms(10); - uart_putchar('W'); - */ } } #endif diff --git a/tmk_core/protocol/vusb/sendchar_usart.c b/tmk_core/protocol/vusb/sendchar_usart.c deleted file mode 100644 index a920a9a536..0000000000 --- a/tmk_core/protocol/vusb/sendchar_usart.c +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - */ -#include <stdint.h> -#include <usbdrv/oddebug.h> -#include "sendchar.h" - -#if DEBUG_LEVEL > 0 -/* from oddebug.c */ -int8_t sendchar(uint8_t c) { - while (!(ODDBG_USR & (1 << ODDBG_UDRE))) - ; /* wait for data register empty */ - ODDBG_UDR = c; - return 1; -} -#else -int8_t sendchar(uint8_t c) { return 1; } -#endif diff --git a/tmk_core/protocol/vusb/vusb.c b/tmk_core/protocol/vusb/vusb.c index c61577f919..0b1a671aa6 100644 --- a/tmk_core/protocol/vusb/vusb.c +++ b/tmk_core/protocol/vusb/vusb.c @@ -15,10 +15,12 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <avr/wdt.h> -#include <util/delay.h> #include <stdint.h> + +#include <avr/wdt.h> + #include <usbdrv/usbdrv.h> + #include "usbconfig.h" #include "host.h" #include "report.h" @@ -26,6 +28,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "vusb.h" #include "print.h" #include "debug.h" +#include "wait.h" #include "usb_descriptor_common.h" #ifdef RAW_ENABLE @@ -56,7 +59,7 @@ enum usb_interfaces { #ifdef CONSOLE_ENABLE CONSOLE_INTERFACE = NEXT_INTERFACE, #endif - TOTAL_INTERFACES = NEXT_INTERFACE, + TOTAL_INTERFACES = NEXT_INTERFACE }; #define MAX_INTERFACES 2 @@ -86,19 +89,13 @@ void vusb_transfer_keyboard(void) { usbSetInterrupt((void *)&kbuf[kbuf_tail], sizeof(report_keyboard_t)); kbuf_tail = (kbuf_tail + 1) % KBUF_SIZE; if (debug_keyboard) { - print("V-USB: kbuf["); - pdec(kbuf_tail); - print("->"); - pdec(kbuf_head); - print("]("); - phex((kbuf_head < kbuf_tail) ? (KBUF_SIZE - kbuf_tail + kbuf_head) : (kbuf_head - kbuf_tail)); - print(")\n"); + dprintf("V-USB: kbuf[%d->%d](%02X)\n", kbuf_tail, kbuf_head, (kbuf_head < kbuf_tail) ? (KBUF_SIZE - kbuf_tail + kbuf_head) : (kbuf_head - kbuf_tail)); } } break; } usbPoll(); - _delay_ms(1); + wait_ms(1); } } @@ -220,7 +217,7 @@ static void send_keyboard(report_keyboard_t *report) { kbuf[kbuf_head] = *report; kbuf_head = next; } else { - debug("kbuf: full\n"); + dprint("kbuf: full\n"); } // NOTE: send key strokes of Macro @@ -283,25 +280,23 @@ usbMsgLen_t usbFunctionSetup(uchar data[8]) { if ((rq->bmRequestType & USBRQ_TYPE_MASK) == USBRQ_TYPE_CLASS) { /* class request type */ if (rq->bRequest == USBRQ_HID_GET_REPORT) { - debug("GET_REPORT:"); + dprint("GET_REPORT:"); if (rq->wIndex.word == KEYBOARD_INTERFACE) { usbMsgPtr = (usbMsgPtr_t)&keyboard_report_sent; return sizeof(keyboard_report_sent); } } else if (rq->bRequest == USBRQ_HID_GET_IDLE) { - debug("GET_IDLE: "); - // debug_hex(vusb_idle_rate); + dprint("GET_IDLE:"); usbMsgPtr = (usbMsgPtr_t)&vusb_idle_rate; return 1; } else if (rq->bRequest == USBRQ_HID_SET_IDLE) { vusb_idle_rate = rq->wValue.bytes[1]; - debug("SET_IDLE: "); - debug_hex(vusb_idle_rate); + dprintf("SET_IDLE: %02X", vusb_idle_rate); } else if (rq->bRequest == USBRQ_HID_SET_REPORT) { - debug("SET_REPORT: "); + dprint("SET_REPORT:"); // Report Type: 0x02(Out)/ReportID: 0x00(none) && Interface: 0(keyboard) if (rq->wValue.word == 0x0200 && rq->wIndex.word == KEYBOARD_INTERFACE) { - debug("SET_LED: "); + dprint("SET_LED:"); last_req.kind = SET_LED; last_req.len = rq->wLength.word; #ifdef BOOTLOADER_SIZE @@ -312,13 +307,13 @@ usbMsgLen_t usbFunctionSetup(uchar data[8]) { } return USB_NO_MSG; // to get data in usbFunctionWrite } else { - debug("UNKNOWN:"); + dprint("UNKNOWN:"); } } else { - debug("VENDOR:"); + dprint("VENDOR:"); /* no vendor specific requests implemented */ } - debug("\n"); + dprint("\n"); return 0; /* default for not implemented requests: return no data back to host */ } @@ -328,9 +323,7 @@ uchar usbFunctionWrite(uchar *data, uchar len) { } switch (last_req.kind) { case SET_LED: - debug("SET_LED: "); - debug_hex(data[0]); - debug("\n"); + dprintf("SET_LED: %02X\n", data[0]); keyboard_led_state = data[0]; last_req.len = 0; return 1; @@ -352,13 +345,13 @@ void usbFunctionWriteOut(uchar *data, uchar len) { #ifdef RAW_ENABLE // Data from host must be divided every 8bytes if (len != 8) { - debug("RAW: invalid length"); + dprint("RAW: invalid length\n"); raw_output_received_bytes = 0; return; } if (raw_output_received_bytes + len > RAW_BUFFER_SIZE) { - debug("RAW: buffer full"); + dprint("RAW: buffer full\n"); raw_output_received_bytes = 0; } else { for (uint8_t i = 0; i < 8; i++) { @@ -414,29 +407,6 @@ const PROGMEM uchar keyboard_hid_report[] = { 0xC0 // End Collection }; -#ifdef RAW_ENABLE -const PROGMEM uchar raw_hid_report[] = { - 0x06, RAW_USAGE_PAGE_LO, RAW_USAGE_PAGE_HI, // Usage Page (Vendor Defined) - 0x09, RAW_USAGE_ID, // Usage (Vendor Defined) - 0xA1, 0x01, // Collection (Application) - // Data to host - 0x09, 0x62, // Usage (Vendor Defined) - 0x15, 0x00, // Logical Minimum (0) - 0x26, 0xFF, 0x00, // Logical Maximum (255) - 0x95, RAW_BUFFER_SIZE, // Report Count - 0x75, 0x08, // Report Size (8) - 0x81, 0x02, // Input (Data, Variable, Absolute) - // Data from host - 0x09, 0x63, // Usage (Vendor Defined) - 0x15, 0x00, // Logical Minimum (0) - 0x26, 0xFF, 0x00, // Logical Maximum (255) - 0x95, RAW_BUFFER_SIZE, // Report Count - 0x75, 0x08, // Report Size (8) - 0x91, 0x02, // Output (Data, Variable, Absolute) - 0xC0 // End Collection -}; -#endif - #if defined(MOUSE_ENABLE) || defined(EXTRAKEY_ENABLE) const PROGMEM uchar mouse_extra_hid_report[] = { # ifdef MOUSE_ENABLE @@ -521,6 +491,29 @@ const PROGMEM uchar mouse_extra_hid_report[] = { }; #endif +#ifdef RAW_ENABLE +const PROGMEM uchar raw_hid_report[] = { + 0x06, RAW_USAGE_PAGE_LO, RAW_USAGE_PAGE_HI, // Usage Page (Vendor Defined) + 0x09, RAW_USAGE_ID, // Usage (Vendor Defined) + 0xA1, 0x01, // Collection (Application) + // Data to host + 0x09, 0x62, // Usage (Vendor Defined) + 0x15, 0x00, // Logical Minimum (0) + 0x26, 0xFF, 0x00, // Logical Maximum (255) + 0x95, RAW_BUFFER_SIZE, // Report Count + 0x75, 0x08, // Report Size (8) + 0x81, 0x02, // Input (Data, Variable, Absolute) + // Data from host + 0x09, 0x63, // Usage (Vendor Defined) + 0x15, 0x00, // Logical Minimum (0) + 0x26, 0xFF, 0x00, // Logical Maximum (255) + 0x95, RAW_BUFFER_SIZE, // Report Count + 0x75, 0x08, // Report Size (8) + 0x91, 0x02, // Output (Data, Variable, Absolute) + 0xC0 // End Collection +}; +#endif + #if defined(CONSOLE_ENABLE) const PROGMEM uchar console_hid_report[] = { 0x06, 0x31, 0xFF, // Usage Page (Vendor Defined - PJRC Teensy compatible) @@ -811,14 +804,6 @@ const PROGMEM usbConfigurationDescriptor_t usbConfigurationDescriptor = { USB_PUBLIC usbMsgLen_t usbFunctionDescriptor(struct usbRequest *rq) { usbMsgLen_t len = 0; - /* - debug("usbFunctionDescriptor: "); - debug_hex(rq->bmRequestType); debug(" "); - debug_hex(rq->bRequest); debug(" "); - debug_hex16(rq->wValue.word); debug(" "); - debug_hex16(rq->wIndex.word); debug(" "); - debug_hex16(rq->wLength.word); debug("\n"); - */ switch (rq->wValue.bytes[1]) { case USBDESCR_DEVICE: usbMsgPtr = (usbMsgPtr_t)&usbDeviceDescriptor; @@ -902,6 +887,5 @@ USB_PUBLIC usbMsgLen_t usbFunctionDescriptor(struct usbRequest *rq) { } break; } - // debug("desc len: "); debug_hex(len); debug("\n"); return len; } |