1 files changed, 0 insertions, 103 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/demokit_20/demokit_20.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/demokit_20/demokit_20.ino
deleted file mode 100644
index f65adf57bb..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/demokit_20/demokit_20.ino
+++ /dev/null
@@ -1,103 +0,0 @@
-#include <adk.h>
-#include <usbhub.h>
-
-// Satisfy IDE, which only needs to see the include statment in the ino.
-#ifdef dobogusinclude
-#include <spi4teensy3.h>
-#include <SPI.h>
-#endif
-
-USB Usb;
-USBHub hub0(&Usb);
-USBHub hub1(&Usb);
-ADK adk(&Usb,"Google, Inc.",
-            "DemoKit",
-            "DemoKit Arduino Board",
-            "1.0",
-            "http://www.android.com",
-            "0000000012345678");
-uint8_t  b, b1;
-
-
-#define  LED1_RED       3
-#define  BUTTON1        2
-
-void init_buttons()
-{
-	pinMode(BUTTON1, INPUT);
-
-	// enable the internal pullups
-	digitalWrite(BUTTON1, HIGH);
-}
-
-void init_leds()
-{
-	digitalWrite(LED1_RED, 0);
-
-	pinMode(LED1_RED, OUTPUT);
-}
-
-void setup()
-{
-	Serial.begin(115200);
-#if !defined(__MIPSEL__)
-  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
-#endif
-	Serial.println("\r\nADK demo start");
-
-        if (Usb.Init() == -1) {
-          Serial.println("OSCOKIRQ failed to assert");
-        while(1); //halt
-        }//if (Usb.Init() == -1...
-
-
-	init_leds();
-	init_buttons();
-	b1 = digitalRead(BUTTON1);
-}
-
-void loop()
-{
-  uint8_t rcode;
-  uint8_t msg[3] = { 0x00 };
-   Usb.Task();
-
-   if( adk.isReady() == false ) {
-     analogWrite(LED1_RED, 255);
-     return;
-   }
-   uint16_t len = sizeof(msg);
-
-   rcode = adk.RcvData(&len, msg);
-   if( rcode ) {
-     USBTRACE2("Data rcv. :", rcode );
-   }
-   if(len > 0) {
-     USBTRACE("\r\nData Packet.");
-    // assumes only one command per packet
-    if (msg[0] == 0x2) {
-      switch( msg[1] ) {
-        case 0:
-          analogWrite(LED1_RED, 255 - msg[2]);
-          break;
-      }//switch( msg[1]...
-    }//if (msg[0] == 0x2...
-   }//if( len > 0...
-
-   msg[0] = 0x1;
-
-   b = digitalRead(BUTTON1);
-   if (b != b1) {
-     USBTRACE("\r\nButton state changed");
-     msg[1] = 0;
-     msg[2] = b ? 0 : 1;
-     rcode = adk.SndData( 3, msg );
-     if( rcode ) {
-       USBTRACE2("Button send: ", rcode );
-     }
-     b1 = b;
-    }//if (b != b1...
-
-
-      delay( 10 );
-}