diff options
Diffstat (limited to 'tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/ArduinoBlinkLED/ArduinoBlinkLED.ino')
-rw-r--r-- | tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/ArduinoBlinkLED/ArduinoBlinkLED.ino | 89 |
1 files changed, 0 insertions, 89 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/ArduinoBlinkLED/ArduinoBlinkLED.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/ArduinoBlinkLED/ArduinoBlinkLED.ino deleted file mode 100644 index d59b9bb3dc..0000000000 --- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/ArduinoBlinkLED/ArduinoBlinkLED.ino +++ /dev/null @@ -1,89 +0,0 @@ -// The source for the Android application can be found at the following link: https://github.com/Lauszus/ArduinoBlinkLED -// The code for the Android application is heavily based on this guide: http://allaboutee.com/2011/12/31/arduino-adk-board-blink-an-led-with-your-phone-code-and-explanation/ by Miguel -#include <adk.h> - -// -// CAUTION! WARNING! ATTENTION! VORSICHT! ADVARSEL! ¡CUIDADO! ВНИМАНИЕ! -// -// Pin 13 is occupied by the SCK pin on various Arduino boards, -// including Uno, Duemilanove, etc., so use a different pin for those boards. -// -// CAUTION! WARNING! ATTENTION! VORSICHT! ADVARSEL! ¡CUIDADO! ВНИМАНИЕ! -// -#if defined(LED_BUILTIN) -#define LED LED_BUILTIN // Use built in LED -#else -#define LED 9 // Set to something here that makes sense for your board. -#endif - - -// Satisfy IDE, which only needs to see the include statment in the ino. -#ifdef dobogusinclude -#include <spi4teensy3.h> -#include <SPI.h> -#endif - -USB Usb; -ADK adk(&Usb, "TKJElectronics", // Manufacturer Name - "ArduinoBlinkLED", // Model Name - "Example sketch for the USB Host Shield", // Description (user-visible string) - "1.0", // Version - "http://www.tkjelectronics.dk/uploads/ArduinoBlinkLED.apk", // URL (web page to visit if no installed apps support the accessory) - "123456789"); // Serial Number (optional) - -uint32_t timer; -bool connected; - -void setup() { - Serial.begin(115200); -#if !defined(__MIPSEL__) - while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection -#endif - if (Usb.Init() == -1) { - Serial.print("\r\nOSCOKIRQ failed to assert"); - while (1); // halt - } - pinMode(LED, OUTPUT); - Serial.print("\r\nArduino Blink LED Started"); -} - -void loop() { - Usb.Task(); - - if (adk.isReady()) { - if (!connected) { - connected = true; - Serial.print(F("\r\nConnected to accessory")); - } - - uint8_t msg[1]; - uint16_t len = sizeof(msg); - uint8_t rcode = adk.RcvData(&len, msg); - if (rcode && rcode != hrNAK) { - Serial.print(F("\r\nData rcv: ")); - Serial.print(rcode, HEX); - } else if (len > 0) { - Serial.print(F("\r\nData Packet: ")); - Serial.print(msg[0]); - digitalWrite(LED, msg[0] ? HIGH : LOW); - } - - if (millis() - timer >= 1000) { // Send data every 1s - timer = millis(); - rcode = adk.SndData(sizeof(timer), (uint8_t*)&timer); - if (rcode && rcode != hrNAK) { - Serial.print(F("\r\nData send: ")); - Serial.print(rcode, HEX); - } else if (rcode != hrNAK) { - Serial.print(F("\r\nTimer: ")); - Serial.print(timer); - } - } - } else { - if (connected) { - connected = false; - Serial.print(F("\r\nDisconnected from accessory")); - digitalWrite(LED, LOW); - } - } -} |