1 files changed, 0 insertions, 89 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/ArduinoBlinkLED/ArduinoBlinkLED.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/ArduinoBlinkLED/ArduinoBlinkLED.ino
deleted file mode 100644
index d59b9bb3dc..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/ArduinoBlinkLED/ArduinoBlinkLED.ino
+++ /dev/null
@@ -1,89 +0,0 @@
-// The source for the Android application can be found at the following link: https://github.com/Lauszus/ArduinoBlinkLED
-// The code for the Android application is heavily based on this guide: http://allaboutee.com/2011/12/31/arduino-adk-board-blink-an-led-with-your-phone-code-and-explanation/ by Miguel
-#include <adk.h>
-
-//
-// CAUTION! WARNING! ATTENTION! VORSICHT! ADVARSEL! ¡CUIDADO! ВНИМАНИЕ!
-//
-// Pin 13 is occupied by the SCK pin on various Arduino boards,
-// including Uno, Duemilanove, etc., so use a different pin for those boards.
-//
-// CAUTION! WARNING! ATTENTION! VORSICHT! ADVARSEL! ¡CUIDADO! ВНИМАНИЕ!
-//
-#if defined(LED_BUILTIN)
-#define LED LED_BUILTIN // Use built in LED
-#else
-#define LED 9 // Set to something here that makes sense for your board.
-#endif
-
-
-// Satisfy IDE, which only needs to see the include statment in the ino.
-#ifdef dobogusinclude
-#include <spi4teensy3.h>
-#include <SPI.h>
-#endif
-
-USB Usb;
-ADK adk(&Usb, "TKJElectronics", // Manufacturer Name
-              "ArduinoBlinkLED", // Model Name
-              "Example sketch for the USB Host Shield", // Description (user-visible string)
-              "1.0", // Version
-              "http://www.tkjelectronics.dk/uploads/ArduinoBlinkLED.apk", // URL (web page to visit if no installed apps support the accessory)
-              "123456789"); // Serial Number (optional)
-
-uint32_t timer;
-bool connected;
-
-void setup() {
-  Serial.begin(115200);
-#if !defined(__MIPSEL__)
-  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
-#endif
-  if (Usb.Init() == -1) {
-    Serial.print("\r\nOSCOKIRQ failed to assert");
-    while (1); // halt
-  }
-  pinMode(LED, OUTPUT);
-  Serial.print("\r\nArduino Blink LED Started");
-}
-
-void loop() {
-  Usb.Task();
-
-  if (adk.isReady()) {
-    if (!connected) {
-      connected = true;
-      Serial.print(F("\r\nConnected to accessory"));
-    }
-
-    uint8_t msg[1];
-    uint16_t len = sizeof(msg);
-    uint8_t rcode = adk.RcvData(&len, msg);
-    if (rcode && rcode != hrNAK) {
-      Serial.print(F("\r\nData rcv: "));
-      Serial.print(rcode, HEX);
-    } else if (len > 0) {
-      Serial.print(F("\r\nData Packet: "));
-      Serial.print(msg[0]);
-      digitalWrite(LED, msg[0] ? HIGH : LOW);
-    }
-
-    if (millis() - timer >= 1000) { // Send data every 1s
-      timer = millis();
-      rcode = adk.SndData(sizeof(timer), (uint8_t*)&timer);
-      if (rcode && rcode != hrNAK) {
-        Serial.print(F("\r\nData send: "));
-        Serial.print(rcode, HEX);
-      } else if (rcode != hrNAK) {
-        Serial.print(F("\r\nTimer: "));
-        Serial.print(timer);
-      }
-    }
-  } else {
-    if (connected) {
-      connected = false;
-      Serial.print(F("\r\nDisconnected from accessory"));
-      digitalWrite(LED, LOW);
-    }
-  }
-}