1 files changed, 0 insertions, 100 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/acm/acm_terminal/acm_terminal.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/acm/acm_terminal/acm_terminal.ino
deleted file mode 100644
index f509cda890..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/acm/acm_terminal/acm_terminal.ino
+++ /dev/null
@@ -1,100 +0,0 @@
-#include <cdcacm.h>
-#include <usbhub.h>
-
-#include "pgmstrings.h"
-
-// Satisfy the IDE, which needs to see the include statment in the ino too.
-#ifdef dobogusinclude
-#include <spi4teensy3.h>
-#include <SPI.h>
-#endif
-
-class ACMAsyncOper : public CDCAsyncOper
-{
-public:
-    uint8_t OnInit(ACM *pacm);
-};
-
-uint8_t ACMAsyncOper::OnInit(ACM *pacm)
-{
-    uint8_t rcode;
-    // Set DTR = 1 RTS=1
-    rcode = pacm->SetControlLineState(3);
-
-    if (rcode)
-    {
-        ErrorMessage<uint8_t>(PSTR("SetControlLineState"), rcode);
-        return rcode;
-    }
-
-    LINE_CODING	lc;
-    lc.dwDTERate	= 115200;
-    lc.bCharFormat	= 0;
-    lc.bParityType	= 0;
-    lc.bDataBits	= 8;
-
-    rcode = pacm->SetLineCoding(&lc);
-
-    if (rcode)
-        ErrorMessage<uint8_t>(PSTR("SetLineCoding"), rcode);
-
-    return rcode;
-}
-
-USB     Usb;
-//USBHub     Hub(&Usb);
-ACMAsyncOper  AsyncOper;
-ACM           Acm(&Usb, &AsyncOper);
-
-void setup()
-{
-  Serial.begin( 115200 );
-#if !defined(__MIPSEL__)
-  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
-#endif
-  Serial.println("Start");
-
-  if (Usb.Init() == -1)
-      Serial.println("OSCOKIRQ failed to assert");
-
-  delay( 200 );
-}
-
-void loop()
-{
-    Usb.Task();
-
-    if( Acm.isReady()) {
-       uint8_t rcode;
-
-       /* reading the keyboard */
-       if(Serial.available()) {
-         uint8_t data= Serial.read();
-         /* sending to the phone */
-         rcode = Acm.SndData(1, &data);
-         if (rcode)
-            ErrorMessage<uint8_t>(PSTR("SndData"), rcode);
-       }//if(Serial.available()...
-
-       delay(50);
-
-        /* reading the phone */
-        /* buffer size must be greater or equal to max.packet size */
-        /* it it set to 64 (largest possible max.packet size) here, can be tuned down
-        for particular endpoint */
-        uint8_t  buf[64];
-        uint16_t rcvd = 64;
-        rcode = Acm.RcvData(&rcvd, buf);
-         if (rcode && rcode != hrNAK)
-            ErrorMessage<uint8_t>(PSTR("Ret"), rcode);
-
-            if( rcvd ) { //more than zero bytes received
-              for(uint16_t i=0; i < rcvd; i++ ) {
-                Serial.print((char)buf[i]); //printing on the screen
-              }
-            }
-        delay(10);
-    }//if( Usb.getUsbTaskState() == USB_STATE_RUNNING..
-}
-
-