1 files changed, 0 insertions, 148 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/PS3USB/PS3USB.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/PS3USB/PS3USB.ino
deleted file mode 100644
index a53dcfbe61..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/PS3USB/PS3USB.ino
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- Example sketch for the PS3 USB library - developed by Kristian Lauszus
- For more information visit my blog: http://blog.tkjelectronics.dk/ or
- send me an e-mail:  kristianl@tkjelectronics.com
- */
-
-#include <PS3USB.h>
-
-// Satisfy the IDE, which needs to see the include statment in the ino too.
-#ifdef dobogusinclude
-#include <spi4teensy3.h>
-#include <SPI.h>
-#endif
-
-USB Usb;
-/* You can create the instance of the class in two ways */
-PS3USB PS3(&Usb); // This will just create the instance
-//PS3USB PS3(&Usb,0x00,0x15,0x83,0x3D,0x0A,0x57); // This will also store the bluetooth address - this can be obtained from the dongle when running the sketch
-
-bool printAngle;
-uint8_t state = 0;
-
-void setup() {
-  Serial.begin(115200);
-#if !defined(__MIPSEL__)
-  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
-#endif
-  if (Usb.Init() == -1) {
-    Serial.print(F("\r\nOSC did not start"));
-    while (1); //halt
-  }
-  Serial.print(F("\r\nPS3 USB Library Started"));
-}
-void loop() {
-  Usb.Task();
-
-  if (PS3.PS3Connected || PS3.PS3NavigationConnected) {
-    if (PS3.getAnalogHat(LeftHatX) > 137 || PS3.getAnalogHat(LeftHatX) < 117 || PS3.getAnalogHat(LeftHatY) > 137 || PS3.getAnalogHat(LeftHatY) < 117 || PS3.getAnalogHat(RightHatX) > 137 || PS3.getAnalogHat(RightHatX) < 117 || PS3.getAnalogHat(RightHatY) > 137 || PS3.getAnalogHat(RightHatY) < 117) {
-      Serial.print(F("\r\nLeftHatX: "));
-      Serial.print(PS3.getAnalogHat(LeftHatX));
-      Serial.print(F("\tLeftHatY: "));
-      Serial.print(PS3.getAnalogHat(LeftHatY));
-      if (PS3.PS3Connected) { // The Navigation controller only have one joystick
-        Serial.print(F("\tRightHatX: "));
-        Serial.print(PS3.getAnalogHat(RightHatX));
-        Serial.print(F("\tRightHatY: "));
-        Serial.print(PS3.getAnalogHat(RightHatY));
-      }
-    }
-    // Analog button values can be read from almost all buttons
-    if (PS3.getAnalogButton(L2) || PS3.getAnalogButton(R2)) {
-      Serial.print(F("\r\nL2: "));
-      Serial.print(PS3.getAnalogButton(L2));
-      if (!PS3.PS3NavigationConnected) {
-        Serial.print(F("\tR2: "));
-        Serial.print(PS3.getAnalogButton(R2));
-      }
-    }
-    if (PS3.getButtonClick(PS))
-      Serial.print(F("\r\nPS"));
-
-    if (PS3.getButtonClick(TRIANGLE))
-      Serial.print(F("\r\nTraingle"));
-    if (PS3.getButtonClick(CIRCLE))
-      Serial.print(F("\r\nCircle"));
-    if (PS3.getButtonClick(CROSS))
-      Serial.print(F("\r\nCross"));
-    if (PS3.getButtonClick(SQUARE))
-      Serial.print(F("\r\nSquare"));
-
-    if (PS3.getButtonClick(UP)) {
-      Serial.print(F("\r\nUp"));
-      PS3.setLedOff();
-      PS3.setLedOn(LED4);
-    }
-    if (PS3.getButtonClick(RIGHT)) {
-      Serial.print(F("\r\nRight"));
-      PS3.setLedOff();
-      PS3.setLedOn(LED1);
-    }
-    if (PS3.getButtonClick(DOWN)) {
-      Serial.print(F("\r\nDown"));
-      PS3.setLedOff();
-      PS3.setLedOn(LED2);
-    }
-    if (PS3.getButtonClick(LEFT)) {
-      Serial.print(F("\r\nLeft"));
-      PS3.setLedOff();
-      PS3.setLedOn(LED3);
-    }
-
-    if (PS3.getButtonClick(L1))
-      Serial.print(F("\r\nL1"));
-    if (PS3.getButtonClick(L3))
-      Serial.print(F("\r\nL3"));
-    if (PS3.getButtonClick(R1))
-      Serial.print(F("\r\nR1"));
-    if (PS3.getButtonClick(R3))
-      Serial.print(F("\r\nR3"));
-
-    if (PS3.getButtonClick(SELECT)) {
-      Serial.print(F("\r\nSelect - "));
-      PS3.printStatusString();
-    }
-    if (PS3.getButtonClick(START)) {
-      Serial.print(F("\r\nStart"));
-      printAngle = !printAngle;
-    }
-    if (printAngle) {
-      Serial.print(F("\r\nPitch: "));
-      Serial.print(PS3.getAngle(Pitch));
-      Serial.print(F("\tRoll: "));
-      Serial.print(PS3.getAngle(Roll));
-    }
-  }
-  else if (PS3.PS3MoveConnected) { // One can only set the color of the bulb, set the rumble, set and get the bluetooth address and calibrate the magnetometer via USB
-    if (state == 0) {
-      PS3.moveSetRumble(0);
-      PS3.moveSetBulb(Off);
-    } else if (state == 1) {
-      PS3.moveSetRumble(75);
-      PS3.moveSetBulb(Red);
-    } else if (state == 2) {
-      PS3.moveSetRumble(125);
-      PS3.moveSetBulb(Green);
-    } else if (state == 3) {
-      PS3.moveSetRumble(150);
-      PS3.moveSetBulb(Blue);
-    } else if (state == 4) {
-      PS3.moveSetRumble(175);
-      PS3.moveSetBulb(Yellow);
-    } else if (state == 5) {
-      PS3.moveSetRumble(200);
-      PS3.moveSetBulb(Lightblue);
-    } else if (state == 6) {
-      PS3.moveSetRumble(225);
-      PS3.moveSetBulb(Purble);
-    } else if (state == 7) {
-      PS3.moveSetRumble(250);
-      PS3.moveSetBulb(White);
-    }
-
-    state++;
-    if (state > 7)
-      state = 0;
-    delay(1000);
-  }
-}