1 files changed, 0 insertions, 129 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/HID/USBHIDBootKbd/USBHIDBootKbd.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/HID/USBHIDBootKbd/USBHIDBootKbd.ino
deleted file mode 100644
index 48b33abfd2..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/HID/USBHIDBootKbd/USBHIDBootKbd.ino
+++ /dev/null
@@ -1,129 +0,0 @@
-#include <hidboot.h>
-#include <usbhub.h>
-
-// Satisfy the IDE, which needs to see the include statment in the ino too.
-#ifdef dobogusinclude
-#include <spi4teensy3.h>
-#include <SPI.h>
-#endif
-
-class KbdRptParser : public KeyboardReportParser
-{
-    void PrintKey(uint8_t mod, uint8_t key);
-
-  protected:
-    void OnControlKeysChanged(uint8_t before, uint8_t after);
-
-    void OnKeyDown	(uint8_t mod, uint8_t key);
-    void OnKeyUp	(uint8_t mod, uint8_t key);
-    void OnKeyPressed(uint8_t key);
-};
-
-void KbdRptParser::PrintKey(uint8_t m, uint8_t key)
-{
-  MODIFIERKEYS mod;
-  *((uint8_t*)&mod) = m;
-  Serial.print((mod.bmLeftCtrl   == 1) ? "C" : " ");
-  Serial.print((mod.bmLeftShift  == 1) ? "S" : " ");
-  Serial.print((mod.bmLeftAlt    == 1) ? "A" : " ");
-  Serial.print((mod.bmLeftGUI    == 1) ? "G" : " ");
-
-  Serial.print(" >");
-  PrintHex<uint8_t>(key, 0x80);
-  Serial.print("< ");
-
-  Serial.print((mod.bmRightCtrl   == 1) ? "C" : " ");
-  Serial.print((mod.bmRightShift  == 1) ? "S" : " ");
-  Serial.print((mod.bmRightAlt    == 1) ? "A" : " ");
-  Serial.println((mod.bmRightGUI    == 1) ? "G" : " ");
-};
-
-void KbdRptParser::OnKeyDown(uint8_t mod, uint8_t key)
-{
-  Serial.print("DN ");
-  PrintKey(mod, key);
-  uint8_t c = OemToAscii(mod, key);
-
-  if (c)
-    OnKeyPressed(c);
-}
-
-void KbdRptParser::OnControlKeysChanged(uint8_t before, uint8_t after) {
-
-  MODIFIERKEYS beforeMod;
-  *((uint8_t*)&beforeMod) = before;
-
-  MODIFIERKEYS afterMod;
-  *((uint8_t*)&afterMod) = after;
-
-  if (beforeMod.bmLeftCtrl != afterMod.bmLeftCtrl) {
-    Serial.println("LeftCtrl changed");
-  }
-  if (beforeMod.bmLeftShift != afterMod.bmLeftShift) {
-    Serial.println("LeftShift changed");
-  }
-  if (beforeMod.bmLeftAlt != afterMod.bmLeftAlt) {
-    Serial.println("LeftAlt changed");
-  }
-  if (beforeMod.bmLeftGUI != afterMod.bmLeftGUI) {
-    Serial.println("LeftGUI changed");
-  }
-
-  if (beforeMod.bmRightCtrl != afterMod.bmRightCtrl) {
-    Serial.println("RightCtrl changed");
-  }
-  if (beforeMod.bmRightShift != afterMod.bmRightShift) {
-    Serial.println("RightShift changed");
-  }
-  if (beforeMod.bmRightAlt != afterMod.bmRightAlt) {
-    Serial.println("RightAlt changed");
-  }
-  if (beforeMod.bmRightGUI != afterMod.bmRightGUI) {
-    Serial.println("RightGUI changed");
-  }
-
-}
-
-void KbdRptParser::OnKeyUp(uint8_t mod, uint8_t key)
-{
-  Serial.print("UP ");
-  PrintKey(mod, key);
-}
-
-void KbdRptParser::OnKeyPressed(uint8_t key)
-{
-  Serial.print("ASCII: ");
-  Serial.println((char)key);
-};
-
-USB     Usb;
-//USBHub     Hub(&Usb);
-HIDBoot<HID_PROTOCOL_KEYBOARD>    HidKeyboard(&Usb);
-
-uint32_t next_time;
-
-KbdRptParser Prs;
-
-void setup()
-{
-  Serial.begin( 115200 );
-#if !defined(__MIPSEL__)
-  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
-#endif
-  Serial.println("Start");
-
-  if (Usb.Init() == -1)
-    Serial.println("OSC did not start.");
-
-  delay( 200 );
-
-  next_time = millis() + 5000;
-
-  HidKeyboard.SetReportParser(0, (HIDReportParser*)&Prs);
-}
-
-void loop()
-{
-  Usb.Task();
-}
-