1 files changed, 0 insertions, 149 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/PS3Multi/PS3Multi.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/PS3Multi/PS3Multi.ino
deleted file mode 100644
index 5ebfd7819c..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/PS3Multi/PS3Multi.ino
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- Example sketch for the PS3 Bluetooth library - developed by Kristian Lauszus
- This example show how one can use multiple controllers with the library
- For more information visit my blog: http://blog.tkjelectronics.dk/ or
- send me an e-mail:  kristianl@tkjelectronics.com
- */
-
-#include <PS3BT.h>
-#include <usbhub.h>
-
-// Satisfy the IDE, which needs to see the include statment in the ino too.
-#ifdef dobogusinclude
-#include <spi4teensy3.h>
-#include <SPI.h>
-#endif
-
-USB Usb;
-//USBHub Hub1(&Usb); // Some dongles have a hub inside
-
-BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
-PS3BT *PS3[2]; // We will use this pointer to store the two instance, you can easily make it larger if you like, but it will use a lot of RAM!
-const uint8_t length = sizeof(PS3) / sizeof(PS3[0]); // Get the lenght of the array
-bool printAngle[length];
-bool oldControllerState[length];
-
-void setup() {
-  for (uint8_t i = 0; i < length; i++) {
-    PS3[i] = new PS3BT(&Btd); // Create the instances
-    PS3[i]->attachOnInit(onInit); // onInit() is called upon a new connection - you can call the function whatever you like
-  }
-
-  Serial.begin(115200);
-#if !defined(__MIPSEL__)
-  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
-#endif
-  if (Usb.Init() == -1) {
-    Serial.print(F("\r\nOSC did not start"));
-    while (1); //halt
-  }
-  Serial.print(F("\r\nPS3 Bluetooth Library Started"));
-}
-void loop() {
-  Usb.Task();
-
-  for (uint8_t i = 0; i < length; i++) {
-    if (PS3[i]->PS3Connected || PS3[i]->PS3NavigationConnected) {
-      if (PS3[i]->getAnalogHat(LeftHatX) > 137 || PS3[i]->getAnalogHat(LeftHatX) < 117 || PS3[i]->getAnalogHat(LeftHatY) > 137 || PS3[i]->getAnalogHat(LeftHatY) < 117 || PS3[i]->getAnalogHat(RightHatX) > 137 || PS3[i]->getAnalogHat(RightHatX) < 117 || PS3[i]->getAnalogHat(RightHatY) > 137 || PS3[i]->getAnalogHat(RightHatY) < 117) {
-        Serial.print(F("\r\nLeftHatX: "));
-        Serial.print(PS3[i]->getAnalogHat(LeftHatX));
-        Serial.print(F("\tLeftHatY: "));
-        Serial.print(PS3[i]->getAnalogHat(LeftHatY));
-        if (PS3[i]->PS3Connected) { // The Navigation controller only have one joystick
-          Serial.print(F("\tRightHatX: "));
-          Serial.print(PS3[i]->getAnalogHat(RightHatX));
-          Serial.print(F("\tRightHatY: "));
-          Serial.print(PS3[i]->getAnalogHat(RightHatY));
-        }
-      }
-      //Analog button values can be read from almost all buttons
-      if (PS3[i]->getAnalogButton(L2) || PS3[i]->getAnalogButton(R2)) {
-        Serial.print(F("\r\nL2: "));
-        Serial.print(PS3[i]->getAnalogButton(L2));
-        if (PS3[i]->PS3Connected) {
-          Serial.print(F("\tR2: "));
-          Serial.print(PS3[i]->getAnalogButton(R2));
-        }
-      }
-      if (PS3[i]->getButtonClick(PS)) {
-        Serial.print(F("\r\nPS"));
-        PS3[i]->disconnect();
-        oldControllerState[i] = false; // Reset value
-      }
-      else {
-        if (PS3[i]->getButtonClick(TRIANGLE))
-          Serial.print(F("\r\nTraingle"));
-        if (PS3[i]->getButtonClick(CIRCLE))
-          Serial.print(F("\r\nCircle"));
-        if (PS3[i]->getButtonClick(CROSS))
-          Serial.print(F("\r\nCross"));
-        if (PS3[i]->getButtonClick(SQUARE))
-          Serial.print(F("\r\nSquare"));
-
-        if (PS3[i]->getButtonClick(UP)) {
-          Serial.print(F("\r\nUp"));
-          if (PS3[i]->PS3Connected) {
-            PS3[i]->setLedOff();
-            PS3[i]->setLedOn(LED4);
-          }
-        }
-        if (PS3[i]->getButtonClick(RIGHT)) {
-          Serial.print(F("\r\nRight"));
-          if (PS3[i]->PS3Connected) {
-            PS3[i]->setLedOff();
-            PS3[i]->setLedOn(LED1);
-          }
-        }
-        if (PS3[i]->getButtonClick(DOWN)) {
-          Serial.print(F("\r\nDown"));
-          if (PS3[i]->PS3Connected) {
-            PS3[i]->setLedOff();
-            PS3[i]->setLedOn(LED2);
-          }
-        }
-        if (PS3[i]->getButtonClick(LEFT)) {
-          Serial.print(F("\r\nLeft"));
-          if (PS3[i]->PS3Connected) {
-            PS3[i]->setLedOff();
-            PS3[i]->setLedOn(LED3);
-          }
-        }
-
-        if (PS3[i]->getButtonClick(L1))
-          Serial.print(F("\r\nL1"));
-        if (PS3[i]->getButtonClick(L3))
-          Serial.print(F("\r\nL3"));
-        if (PS3[i]->getButtonClick(R1))
-          Serial.print(F("\r\nR1"));
-        if (PS3[i]->getButtonClick(R3))
-          Serial.print(F("\r\nR3"));
-
-        if (PS3[i]->getButtonClick(SELECT)) {
-          Serial.print(F("\r\nSelect - "));
-          PS3[i]->printStatusString();
-        }
-        if (PS3[i]->getButtonClick(START)) {
-          Serial.print(F("\r\nStart"));
-          printAngle[i] = !printAngle[i];
-        }
-      }
-      if (printAngle[i]) {
-        Serial.print(F("\r\nPitch: "));
-        Serial.print(PS3[i]->getAngle(Pitch));
-        Serial.print(F("\tRoll: "));
-        Serial.print(PS3[i]->getAngle(Roll));
-      }
-    }
-    /* I have removed the PS3 Move code as an Uno will run out of RAM if it's included */
-    //else if(PS3[i]->PS3MoveConnected) {
-  }
-}
-
-void onInit() {
-  for (uint8_t i = 0; i < length; i++) {
-    if ((PS3[i]->PS3Connected || PS3[i]->PS3NavigationConnected) && !oldControllerState[i]) {
-      oldControllerState[i] = true; // Used to check which is the new controller
-      PS3[i]->setLedOn((LEDEnum)(i + 1)); // Cast directly to LEDEnum - see: "controllerEnums.h"
-    }
-  }
-}