1 files changed, 0 insertions, 188 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/PS3BT/PS3BT.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/PS3BT/PS3BT.ino
deleted file mode 100644
index b896734405..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/PS3BT/PS3BT.ino
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- Example sketch for the PS3 Bluetooth library - developed by Kristian Lauszus
- For more information visit my blog: http://blog.tkjelectronics.dk/ or
- send me an e-mail:  kristianl@tkjelectronics.com
- */
-
-#include <PS3BT.h>
-#include <usbhub.h>
-
-// Satisfy the IDE, which needs to see the include statment in the ino too.
-#ifdef dobogusinclude
-#include <spi4teensy3.h>
-#include <SPI.h>
-#endif
-
-USB Usb;
-//USBHub Hub1(&Usb); // Some dongles have a hub inside
-
-BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
-/* You can create the instance of the class in two ways */
-PS3BT PS3(&Btd); // This will just create the instance
-//PS3BT PS3(&Btd, 0x00, 0x15, 0x83, 0x3D, 0x0A, 0x57); // This will also store the bluetooth address - this can be obtained from the dongle when running the sketch
-
-bool printTemperature;
-bool printAngle;
-
-void setup() {
-  Serial.begin(115200);
-#if !defined(__MIPSEL__)
-  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
-#endif
-  if (Usb.Init() == -1) {
-    Serial.print(F("\r\nOSC did not start"));
-    while (1); //halt
-  }
-  Serial.print(F("\r\nPS3 Bluetooth Library Started"));
-}
-void loop() {
-  Usb.Task();
-
-  if (PS3.PS3Connected || PS3.PS3NavigationConnected) {
-    if (PS3.getAnalogHat(LeftHatX) > 137 || PS3.getAnalogHat(LeftHatX) < 117 || PS3.getAnalogHat(LeftHatY) > 137 || PS3.getAnalogHat(LeftHatY) < 117 || PS3.getAnalogHat(RightHatX) > 137 || PS3.getAnalogHat(RightHatX) < 117 || PS3.getAnalogHat(RightHatY) > 137 || PS3.getAnalogHat(RightHatY) < 117) {
-      Serial.print(F("\r\nLeftHatX: "));
-      Serial.print(PS3.getAnalogHat(LeftHatX));
-      Serial.print(F("\tLeftHatY: "));
-      Serial.print(PS3.getAnalogHat(LeftHatY));
-      if (PS3.PS3Connected) { // The Navigation controller only have one joystick
-        Serial.print(F("\tRightHatX: "));
-        Serial.print(PS3.getAnalogHat(RightHatX));
-        Serial.print(F("\tRightHatY: "));
-        Serial.print(PS3.getAnalogHat(RightHatY));
-      }
-    }
-
-    // Analog button values can be read from almost all buttons
-    if (PS3.getAnalogButton(L2) || PS3.getAnalogButton(R2)) {
-      Serial.print(F("\r\nL2: "));
-      Serial.print(PS3.getAnalogButton(L2));
-      if (PS3.PS3Connected) {
-        Serial.print(F("\tR2: "));
-        Serial.print(PS3.getAnalogButton(R2));
-      }
-    }
-    if (PS3.getButtonClick(PS)) {
-      Serial.print(F("\r\nPS"));
-      PS3.disconnect();
-    }
-    else {
-      if (PS3.getButtonClick(TRIANGLE))
-        Serial.print(F("\r\nTraingle"));
-      if (PS3.getButtonClick(CIRCLE))
-        Serial.print(F("\r\nCircle"));
-      if (PS3.getButtonClick(CROSS))
-        Serial.print(F("\r\nCross"));
-      if (PS3.getButtonClick(SQUARE))
-        Serial.print(F("\r\nSquare"));
-
-      if (PS3.getButtonClick(UP)) {
-        Serial.print(F("\r\nUp"));
-        if (PS3.PS3Connected) {
-          PS3.setLedOff();
-          PS3.setLedOn(LED4);
-        }
-      }
-      if (PS3.getButtonClick(RIGHT)) {
-        Serial.print(F("\r\nRight"));
-        if (PS3.PS3Connected) {
-          PS3.setLedOff();
-          PS3.setLedOn(LED1);
-        }
-      }
-      if (PS3.getButtonClick(DOWN)) {
-        Serial.print(F("\r\nDown"));
-        if (PS3.PS3Connected) {
-          PS3.setLedOff();
-          PS3.setLedOn(LED2);
-        }
-      }
-      if (PS3.getButtonClick(LEFT)) {
-        Serial.print(F("\r\nLeft"));
-        if (PS3.PS3Connected) {
-          PS3.setLedOff();
-          PS3.setLedOn(LED3);
-        }
-      }
-
-      if (PS3.getButtonClick(L1))
-        Serial.print(F("\r\nL1"));
-      if (PS3.getButtonClick(L3))
-        Serial.print(F("\r\nL3"));
-      if (PS3.getButtonClick(R1))
-        Serial.print(F("\r\nR1"));
-      if (PS3.getButtonClick(R3))
-        Serial.print(F("\r\nR3"));
-
-      if (PS3.getButtonClick(SELECT)) {
-        Serial.print(F("\r\nSelect - "));
-        PS3.printStatusString();
-      }
-      if (PS3.getButtonClick(START)) {
-        Serial.print(F("\r\nStart"));
-        printAngle = !printAngle;
-      }
-    }
-#if 0 // Set this to 1 in order to see the angle of the controller
-    if (printAngle) {
-      Serial.print(F("\r\nPitch: "));
-      Serial.print(PS3.getAngle(Pitch));
-      Serial.print(F("\tRoll: "));
-      Serial.print(PS3.getAngle(Roll));
-    }
-#endif
-  }
-#if 0 // Set this to 1 in order to enable support for the Playstation Move controller
-  else if (PS3.PS3MoveConnected) {
-    if (PS3.getAnalogButton(T)) {
-      Serial.print(F("\r\nT: "));
-      Serial.print(PS3.getAnalogButton(T));
-    }
-    if (PS3.getButtonClick(PS)) {
-      Serial.print(F("\r\nPS"));
-      PS3.disconnect();
-    }
-    else {
-      if (PS3.getButtonClick(SELECT)) {
-        Serial.print(F("\r\nSelect"));
-        printTemperature = !printTemperature;
-      }
-      if (PS3.getButtonClick(START)) {
-        Serial.print(F("\r\nStart"));
-        printAngle = !printAngle;
-      }
-      if (PS3.getButtonClick(TRIANGLE)) {
-        Serial.print(F("\r\nTriangle"));
-        PS3.moveSetBulb(Red);
-      }
-      if (PS3.getButtonClick(CIRCLE)) {
-        Serial.print(F("\r\nCircle"));
-        PS3.moveSetBulb(Green);
-      }
-      if (PS3.getButtonClick(SQUARE)) {
-        Serial.print(F("\r\nSquare"));
-        PS3.moveSetBulb(Blue);
-      }
-      if (PS3.getButtonClick(CROSS)) {
-        Serial.print(F("\r\nCross"));
-        PS3.moveSetBulb(Yellow);
-      }
-      if (PS3.getButtonClick(MOVE)) {
-        PS3.moveSetBulb(Off);
-        Serial.print(F("\r\nMove"));
-        Serial.print(F(" - "));
-        PS3.printStatusString();
-      }
-    }
-    if (printAngle) {
-      Serial.print(F("\r\nPitch: "));
-      Serial.print(PS3.getAngle(Pitch));
-      Serial.print(F("\tRoll: "));
-      Serial.print(PS3.getAngle(Roll));
-    }
-    else if (printTemperature) {
-      Serial.print(F("\r\nTemperature: "));
-      Serial.print(PS3.getTemperature());
-    }
-  }
-#endif
-}