1 files changed, 0 insertions, 185 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/PSBuzz.h b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/PSBuzz.h
deleted file mode 100644
index 8880d9e50a..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/PSBuzz.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/* Copyright (C) 2014 Kristian Lauszus, TKJ Electronics. All rights reserved.
-
- This software may be distributed and modified under the terms of the GNU
- General Public License version 2 (GPL2) as published by the Free Software
- Foundation and appearing in the file GPL2.TXT included in the packaging of
- this file. Please note that GPL2 Section 2[b] requires that all works based
- on this software must also be made publicly available under the terms of
- the GPL2 ("Copyleft").
-
- Contact information
- -------------------
-
- Kristian Lauszus, TKJ Electronics
- Web      :  http://www.tkjelectronics.com
- e-mail   :  kristianl@tkjelectronics.com
- */
-
-#ifndef _psbuzz_h_
-#define _psbuzz_h_
-
-#include "hiduniversal.h"
-#include "controllerEnums.h"
-
-#define PSBUZZ_VID 0x054C // Sony Corporation
-#define PSBUZZ_PID 0x1000 // PS Buzz Controller
-
-/** Struct used to easily read the different buttons on the controllers */
-union PSBUZZButtons {
-        struct {
-                uint8_t red : 1;
-                uint8_t yellow : 1;
-                uint8_t green : 1;
-                uint8_t orange : 1;
-                uint8_t blue : 1;
-        } __attribute__((packed)) btn[4];
-        uint32_t val : 20;
-} __attribute__((packed));
-
-/**
- * This class implements support for the PS Buzz controllers via USB.
- * It uses the HIDUniversal class for all the USB communication.
- */
-class PSBuzz : public HIDUniversal {
-public:
-        /**
-         * Constructor for the PSBuzz class.
-         * @param  p   Pointer to the USB class instance.
-         */
-        PSBuzz(USB *p) :
-        HIDUniversal(p) {
-                Reset();
-        };
-
-        /**
-         * Used to check if a PS Buzz controller is connected.
-         * @return Returns true if it is connected.
-         */
-        bool connected() {
-                return HIDUniversal::isReady() && HIDUniversal::VID == PSBUZZ_VID && HIDUniversal::PID == PSBUZZ_PID;
-        };
-
-        /**
-         * Used to call your own function when the device is successfully initialized.
-         * @param funcOnInit Function to call.
-         */
-        void attachOnInit(void (*funcOnInit)(void)) {
-                pFuncOnInit = funcOnInit;
-        };
-
-        /** @name PS Buzzer Controller functions */
-        /**
-         * getButtonPress(ButtonEnum b) will return true as long as the button is held down.
-         *
-         * While getButtonClick(ButtonEnum b) will only return it once.
-         *
-         * So you instance if you need to increase a variable once you would use getButtonClick(ButtonEnum b),
-         * but if you need to drive a robot forward you would use getButtonPress(ButtonEnum b).
-         * @param  b          ::ButtonEnum to read.
-         * @param  controller The controller to read from. Default to 0.
-         * @return            getButtonPress(ButtonEnum b) will return a true as long as a button is held down, while getButtonClick(ButtonEnum b) will return true once for each button press.
-         */
-        bool getButtonPress(ButtonEnum b, uint8_t controller = 0);
-        bool getButtonClick(ButtonEnum b, uint8_t controller = 0);
-        /**@}*/
-        /** @name PS Buzzer Controller functions */
-        /**
-         * Set LED value without using ::LEDEnum.
-         * @param value See: ::LEDEnum.
-         */
-        /**
-         * Set LED values directly.
-         * @param value      Used to set whenever the LED should be on or off
-         * @param controller The controller to control. Defaults to 0.
-         */
-        void setLedRaw(bool value, uint8_t controller = 0);
-
-        /** Turn all LEDs off. */
-        void setLedOffAll() {
-                for (uint8_t i = 1; i < 4; i++) // Skip first as it will be set in setLedRaw
-                        ledState[i] = false; // Just an easy way to set all four off at the same time
-                setLedRaw(false); // Turn the LED off, on all four controllers
-        };
-
-        /**
-         * Turn the LED off on a specific controller.
-         * @param controller The controller to turn off. Defaults to 0.
-         */
-        void setLedOff(uint8_t controller = 0) {
-                setLedRaw(false, controller);
-        };
-
-
-        /** Turn all LEDs on. */
-        void setLedOnAll() {
-                for (uint8_t i = 1; i < 4; i++) // Skip first as it will be set in setLedRaw
-                        ledState[i] = true; // Just an easy way to set all four off at the same time
-                setLedRaw(true); // Turn the LED on, on all four controllers
-        };
-
-        /**
-         * Turn the LED on on a specific controller.
-         * @param controller The controller to turn off. Defaults to 0.
-         */
-        void setLedOn(uint8_t controller = 0) {
-                setLedRaw(true, controller);
-        };
-
-        /**
-         * Toggle the LED on a specific controller.
-         * @param controller The controller to turn off. Defaults to 0.
-         */
-        void setLedToggle(uint8_t controller = 0) {
-                setLedRaw(!ledState[controller], controller);
-        };
-        /**@}*/
-
-protected:
-        /** @name HIDUniversal implementation */
-        /**
-         * Used to parse USB HID data.
-         * @param hid       Pointer to the HID class.
-         * @param is_rpt_id Only used for Hubs.
-         * @param len       The length of the incoming data.
-         * @param buf       Pointer to the data buffer.
-         */
-        void ParseHIDData(HID *hid, bool is_rpt_id, uint8_t len, uint8_t *buf);
-
-        /**
-         * Called when a device is successfully initialized.
-         * Use attachOnInit(void (*funcOnInit)(void)) to call your own function.
-         * This is useful for instance if you want to set the LEDs in a specific way.
-         */
-        uint8_t OnInitSuccessful();
-        /**@}*/
-
-        /** Used to reset the different buffers to their default values */
-        void Reset() {
-                psbuzzButtons.val = 0;
-                oldButtonState.val = 0;
-                buttonClickState.val = 0;
-                for (uint8_t i = 0; i < sizeof(ledState); i++)
-                        ledState[i] = 0;
-        };
-
-        /** @name USBDeviceConfig implementation */
-        /**
-         * Used by the USB core to check what this driver support.
-         * @param  vid The device's VID.
-         * @param  pid The device's PID.
-         * @return     Returns true if the device's VID and PID matches this driver.
-         */
-        virtual bool VIDPIDOK(uint16_t vid, uint16_t pid) {
-                return (vid == PSBUZZ_VID && pid == PSBUZZ_PID);
-        };
-        /**@}*/
-
-private:
-        void (*pFuncOnInit)(void); // Pointer to function called in onInit()
-
-        void PSBuzz_Command(uint8_t *data, uint16_t nbytes);
-
-        PSBUZZButtons psbuzzButtons, oldButtonState, buttonClickState;
-        bool ledState[4];
-};
-#endif