1 files changed, 0 insertions, 133 deletions
diff --git a/tmk_core/protocol/serial_uart.c b/tmk_core/protocol/serial_uart.c
deleted file mode 100644
index d5b5657095..0000000000
--- a/tmk_core/protocol/serial_uart.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
-Copyright 2013 Jun WAKO <wakojun@gmail.com>
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
-  notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
-  notice, this list of conditions and the following disclaimer in
-  the documentation and/or other materials provided with the
-  distribution.
-
-* Neither the name of the copyright holders nor the names of
-  contributors may be used to endorse or promote products derived
-  from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include "serial.h"
-
-#ifndef SERIAL_UART_BAUD
-#    define SERIAL_UART_BAUD 9600
-#endif
-
-#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
-#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
-#define SERIAL_UART_RXD_VECT USART1_RX_vect
-
-#ifndef SERIAL_UART_INIT_CUSTOM
-#    define SERIAL_UART_INIT_CUSTOM \
-        /* enable TX */             \
-        UCSR1B = _BV(TXEN1);        \
-        /* 8-bit data */            \
-        UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
-#endif
-
-#if defined(SERIAL_UART_RTS_LO) && defined(SERIAL_UART_RTS_HI)
-// Buffer state
-//   Empty:           RBUF_SPACE == RBUF_SIZE(head==tail)
-//   Last 1 space:    RBUF_SPACE == 2
-//   Full:            RBUF_SPACE == 1(last cell of rbuf be never used.)
-#    define RBUF_SPACE() (rbuf_head < rbuf_tail ? (rbuf_tail - rbuf_head) : (RBUF_SIZE - rbuf_head + rbuf_tail))
-// allow to send
-#    define rbuf_check_rts_lo()                         \
-        do {                                            \
-            if (RBUF_SPACE() > 2) SERIAL_UART_RTS_LO(); \
-        } while (0)
-// prohibit to send
-#    define rbuf_check_rts_hi()                          \
-        do {                                             \
-            if (RBUF_SPACE() <= 2) SERIAL_UART_RTS_HI(); \
-        } while (0)
-#else
-#    define rbuf_check_rts_lo()
-#    define rbuf_check_rts_hi()
-#endif
-
-void serial_init(void) {
-    do {
-        // Set baud rate
-        UBRR1L = SERIAL_UART_UBRR;
-        UBRR1L = SERIAL_UART_UBRR >> 8;
-        SERIAL_UART_INIT_CUSTOM;
-    } while (0);
-}
-
-// RX ring buffer
-#define RBUF_SIZE 256
-static uint8_t rbuf[RBUF_SIZE];
-static uint8_t rbuf_head = 0;
-static uint8_t rbuf_tail = 0;
-
-uint8_t serial_recv(void) {
-    uint8_t data = 0;
-    if (rbuf_head == rbuf_tail) {
-        return 0;
-    }
-
-    data      = rbuf[rbuf_tail];
-    rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE;
-    rbuf_check_rts_lo();
-    return data;
-}
-
-int16_t serial_recv2(void) {
-    uint8_t data = 0;
-    if (rbuf_head == rbuf_tail) {
-        return -1;
-    }
-
-    data      = rbuf[rbuf_tail];
-    rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE;
-    rbuf_check_rts_lo();
-    return data;
-}
-
-void serial_send(uint8_t data) {
-    while (!SERIAL_UART_TXD_READY)
-        ;
-    SERIAL_UART_DATA = data;
-}
-
-// USART RX complete interrupt
-ISR(SERIAL_UART_RXD_VECT) {
-    uint8_t next = (rbuf_head + 1) % RBUF_SIZE;
-    if (next != rbuf_tail) {
-        rbuf[rbuf_head] = SERIAL_UART_DATA;
-        rbuf_head       = next;
-    }
-    rbuf_check_rts_hi();
-}