diff options
Diffstat (limited to 'tmk_core/protocol/lufa/lufa.c')
| -rw-r--r-- | tmk_core/protocol/lufa/lufa.c | 124 |
1 files changed, 70 insertions, 54 deletions
diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 63619fdb3b..e638dbc0fb 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -142,9 +142,7 @@ static void send_keyboard(report_keyboard_t *report); static void send_mouse(report_mouse_t *report); static void send_system(uint16_t data); static void send_consumer(uint16_t data); -host_driver_t lufa_driver = { - keyboard_leds, send_keyboard, send_mouse, send_system, send_consumer, -}; +host_driver_t lufa_driver = {keyboard_leds, send_keyboard, send_mouse, send_system, send_consumer}; #ifdef VIRTSER_ENABLE // clang-format off @@ -314,45 +312,44 @@ static void Console_Task(void) { void send_joystick_packet(joystick_t *joystick) { uint8_t timeout = 255; - joystick_report_t r = { + static joystick_report_t; + r = (joystick_report_t) { # if JOYSTICK_AXES_COUNT > 0 .axes = - { - joystick->axes[0], + { joystick->axes[0], # if JOYSTICK_AXES_COUNT >= 2 - joystick->axes[1], + joystick->axes[1], # endif # if JOYSTICK_AXES_COUNT >= 3 - joystick->axes[2], + joystick->axes[2], # endif # if JOYSTICK_AXES_COUNT >= 4 - joystick->axes[3], + joystick->axes[3], # endif # if JOYSTICK_AXES_COUNT >= 5 - joystick->axes[4], + joystick->axes[4], # endif # if JOYSTICK_AXES_COUNT >= 6 - joystick->axes[5], + joystick->axes[5], # endif - }, + }, # endif // JOYSTICK_AXES_COUNT>0 # if JOYSTICK_BUTTON_COUNT > 0 - .buttons = - { - joystick->buttons[0], + .buttons = { + joystick->buttons[0], # if JOYSTICK_BUTTON_COUNT > 8 - joystick->buttons[1], + joystick->buttons[1], # endif # if JOYSTICK_BUTTON_COUNT > 16 - joystick->buttons[2], + joystick->buttons[2], # endif # if JOYSTICK_BUTTON_COUNT > 24 - joystick->buttons[3], + joystick->buttons[3], # endif - } + } # endif // JOYSTICK_BUTTON_COUNT>0 }; @@ -526,6 +523,11 @@ void EVENT_USB_Device_ConfigurationChanged(void) { /* Setup joystick endpoint */ ConfigSuccess &= Endpoint_ConfigureEndpoint((JOYSTICK_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, JOYSTICK_EPSIZE, 1); #endif + +#if defined(DIGITIZER_ENABLE) && !defined(DIGITIZER_SHARED_EP) + /* Setup digitizer endpoint */ + ConfigSuccess &= Endpoint_ConfigureEndpoint((DIGITIZER_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, DIGITIZER_EPSIZE, 1); +#endif } /* FIXME: Expose this table in the docs somehow @@ -768,7 +770,8 @@ static void send_extra(uint8_t report_id, uint16_t data) { if (USB_DeviceState != DEVICE_STATE_Configured) return; - report_extra_t r = {.report_id = report_id, .usage = data}; + static report_extra_t r; + r = (report_extra_t){.report_id = report_id, .usage = data}; Endpoint_SelectEndpoint(SHARED_IN_EPNUM); /* Check if write ready for a polling interval around 10ms */ @@ -983,6 +986,23 @@ void virtser_send(const uint8_t byte) { } #endif +void send_digitizer(report_digitizer_t *report) { +#ifdef DIGITIZER_ENABLE + uint8_t timeout = 255; + + if (USB_DeviceState != DEVICE_STATE_Configured) return; + + Endpoint_SelectEndpoint(DIGITIZER_IN_EPNUM); + + /* Check if write ready for a polling interval around 10ms */ + while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40); + if (!Endpoint_IsReadWriteAllowed()) return; + + Endpoint_Write_Stream_LE(report, sizeof(report_digitizer_t), NULL); + Endpoint_ClearIN(); +#endif +} + /******************************************************************************* * main ******************************************************************************/ @@ -1013,18 +1033,16 @@ static void setup_usb(void) { USB_Device_EnableSOFEvents(); } -/** \brief Main - * - * FIXME: Needs doc - */ -int main(void) __attribute__((weak)); -int main(void) { +void protocol_setup(void) { #ifdef MIDI_ENABLE setup_midi(); #endif setup_mcu(); keyboard_setup(); +} + +void protocol_init(void) { setup_usb(); sei(); @@ -1058,57 +1076,55 @@ int main(void) { #endif print("Keyboard start.\n"); - while (1) { +} + +void protocol_task(void) { #if !defined(NO_USB_STARTUP_CHECK) - if (USB_DeviceState == DEVICE_STATE_Suspended) { - print("[s]"); - while (USB_DeviceState == DEVICE_STATE_Suspended) { - suspend_power_down(); - if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) { - USB_Device_SendRemoteWakeup(); - clear_keyboard(); + if (USB_DeviceState == DEVICE_STATE_Suspended) { + print("[s]"); + while (USB_DeviceState == DEVICE_STATE_Suspended) { + suspend_power_down(); + if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) { + USB_Device_SendRemoteWakeup(); + clear_keyboard(); # if USB_SUSPEND_WAKEUP_DELAY > 0 - // Some hubs, kvm switches, and monitors do - // weird things, with USB device state bouncing - // around wildly on wakeup, yielding race - // conditions that can corrupt the keyboard state. - // - // Pause for a while to let things settle... - wait_ms(USB_SUSPEND_WAKEUP_DELAY); + // Some hubs, kvm switches, and monitors do + // weird things, with USB device state bouncing + // around wildly on wakeup, yielding race + // conditions that can corrupt the keyboard state. + // + // Pause for a while to let things settle... + wait_ms(USB_SUSPEND_WAKEUP_DELAY); # endif - } } - suspend_wakeup_init(); } + suspend_wakeup_init(); + } #endif - keyboard_task(); + keyboard_task(); #ifdef MIDI_ENABLE - MIDI_Device_USBTask(&USB_MIDI_Interface); + MIDI_Device_USBTask(&USB_MIDI_Interface); #endif #ifdef MODULE_ADAFRUIT_BLE - adafruit_ble_task(); + adafruit_ble_task(); #endif #ifdef VIRTSER_ENABLE - virtser_task(); - CDC_Device_USBTask(&cdc_device); + virtser_task(); + CDC_Device_USBTask(&cdc_device); #endif #ifdef RAW_ENABLE - raw_hid_task(); + raw_hid_task(); #endif #if !defined(INTERRUPT_CONTROL_ENDPOINT) - USB_USBTask(); + USB_USBTask(); #endif - - // Run housekeeping - housekeeping_task(); - } } uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint16_t wIndex, const void **const DescriptorAddress) { return get_usb_descriptor(wValue, wIndex, DescriptorAddress); } |