diff options
Diffstat (limited to 'tmk_core/protocol/arm_atsam/md_rgb_matrix.c')
-rw-r--r-- | tmk_core/protocol/arm_atsam/md_rgb_matrix.c | 100 |
1 files changed, 84 insertions, 16 deletions
diff --git a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c index 98967aac88..0741584439 100644 --- a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c +++ b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c @@ -15,6 +15,10 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#define FLUSH_TIMEOUT 5000 +#define EECONFIG_MD_LED ((uint8_t*)(EECONFIG_SIZE + 64)) +#define MD_LED_CONFIG_VERSION 1 + #ifdef RGB_MATRIX_ENABLE # include "arm_atsam_protocol.h" # include "led.h" @@ -23,8 +27,41 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # include <math.h> # ifdef USE_MASSDROP_CONFIGURATOR +// TODO?: wire these up to keymap.c +md_led_config_t md_led_config = {0}; + +EECONFIG_DEBOUNCE_HELPER(md_led, EECONFIG_MD_LED, md_led_config); + +void eeconfig_update_md_led_default(void) { + md_led_config.ver = MD_LED_CONFIG_VERSION; + + gcr_desired = LED_GCR_MAX; + led_animation_orientation = 0; + led_animation_direction = 0; + led_animation_breathing = 0; + led_animation_id = 0; + led_animation_speed = 4.0f; + led_lighting_mode = LED_MODE_NORMAL; + led_enabled = 1; + led_animation_breathe_cur = BREATHE_MIN_STEP; + breathe_dir = 1; + led_animation_circular = 0; + led_edge_brightness = 1.0f; + led_ratio_brightness = 1.0f; + led_edge_mode = LED_EDGE_MODE_ALL; + + eeconfig_flush_md_led(true); +} + +void md_led_changed(void) { eeconfig_flag_md_led(true); } + +// todo: use real task rather than this bodge +void housekeeping_task_kb(void) { eeconfig_flush_md_led_task(FLUSH_TIMEOUT); } + __attribute__((weak)) led_instruction_t led_instructions[] = {{.end = 1}}; static void md_rgb_matrix_config_override(int i); +# else +uint8_t gcr_desired; # endif // USE_MASSDROP_CONFIGURATOR void SERCOM1_0_Handler(void) { @@ -56,7 +93,6 @@ issi3733_driver_t issidrv[ISSI3733_DRIVER_COUNT]; issi3733_led_t led_map[ISSI3733_LED_COUNT] = ISSI3733_LED_MAP; RGB led_buffer[ISSI3733_LED_COUNT]; -uint8_t gcr_desired; uint8_t gcr_actual; uint8_t gcr_actual_last; # ifdef USE_MASSDROP_CONFIGURATOR @@ -218,6 +254,13 @@ static void led_set_all(uint8_t r, uint8_t g, uint8_t b) { static void init(void) { DBGC(DC_LED_MATRIX_INIT_BEGIN); +# ifdef USE_MASSDROP_CONFIGURATOR + eeconfig_init_md_led(); + if (md_led_config.ver != MD_LED_CONFIG_VERSION) { + eeconfig_update_md_led_default(); + } +# endif + issi3733_prepare_arrays(); md_rgb_matrix_prepare(); @@ -331,17 +374,6 @@ const rgb_matrix_driver_t rgb_matrix_driver = {.init = init, .flush = flush, .se # ifdef USE_MASSDROP_CONFIGURATOR // Ported from Massdrop QMK GitHub Repo -// TODO?: wire these up to keymap.c -uint8_t led_animation_orientation = 0; -uint8_t led_animation_direction = 0; -uint8_t led_animation_breathing = 0; -uint8_t led_animation_id = 0; -float led_animation_speed = 4.0f; -uint8_t led_lighting_mode = LED_MODE_NORMAL; -uint8_t led_enabled = 1; -uint8_t led_animation_breathe_cur = BREATHE_MIN_STEP; -uint8_t breathe_dir = 1; - static void led_run_pattern(led_setup_t* f, float* ro, float* go, float* bo, float pos) { float po; @@ -398,16 +430,32 @@ static void led_run_pattern(led_setup_t* f, float* ro, float* go, float* bo, flo } } +# define RGB_MAX_DISTANCE 232.9635f + static void md_rgb_matrix_config_override(int i) { float ro = 0; float go = 0; float bo = 0; - - float po = (led_animation_orientation) ? (float)g_led_config.point[i].y / 64.f * 100 : (float)g_led_config.point[i].x / 224.f * 100; + float po; uint8_t highest_active_layer = biton32(layer_state); - if (led_lighting_mode == LED_MODE_KEYS_ONLY && HAS_FLAGS(g_led_config.flags[i], LED_FLAG_UNDERGLOW)) { + if (led_animation_circular) { + // TODO: should use min/max values from LED configuration instead of + // hard-coded 224, 64 + // po = sqrtf((powf(fabsf((disp.width / 2) - (led_cur->x - disp.left)), 2) + powf(fabsf((disp.height / 2) - (led_cur->y - disp.bottom)), 2))) / disp.max_distance * 100; + po = sqrtf((powf(fabsf((224 / 2) - (float)g_led_config.point[i].x), 2) + powf(fabsf((64 / 2) - (float)g_led_config.point[i].y), 2))) / RGB_MAX_DISTANCE * 100; + } else { + if (led_animation_orientation) { + po = (float)g_led_config.point[i].y / 64.f * 100; + } else { + po = (float)g_led_config.point[i].x / 224.f * 100; + } + } + + if (led_edge_mode == LED_EDGE_MODE_ALTERNATE && LED_IS_EDGE_ALT(led_map[i].scan)) { + // Do not act on this LED (Edge alternate lighting mode) + } else if (led_lighting_mode == LED_MODE_KEYS_ONLY && HAS_FLAGS(g_led_config.flags[i], LED_FLAG_UNDERGLOW)) { // Do not act on this LED } else if (led_lighting_mode == LED_MODE_NON_KEYS_ONLY && !HAS_FLAGS(g_led_config.flags[i], LED_FLAG_UNDERGLOW)) { // Do not act on this LED @@ -465,10 +513,30 @@ static void md_rgb_matrix_config_override(int i) { } } + // Adjust edge LED brightness + if (led_edge_brightness != 1 && LED_IS_EDGE(led_map[i].scan)) { + ro *= led_edge_brightness; + go *= led_edge_brightness; + bo *= led_edge_brightness; + } + + // Adjust ratio of key vs. underglow (edge) LED brightness + if (LED_IS_EDGE(led_map[i].scan) && led_ratio_brightness > 1.0) { + // Decrease edge (underglow) LEDs + ro *= (2.0 - led_ratio_brightness); + go *= (2.0 - led_ratio_brightness); + bo *= (2.0 - led_ratio_brightness); + } else if (LED_IS_KEY(led_map[i].scan) && led_ratio_brightness < 1.0) { + // Decrease KEY LEDs + ro *= led_ratio_brightness; + go *= led_ratio_brightness; + bo *= led_ratio_brightness; + } + led_buffer[i].r = (uint8_t)ro; led_buffer[i].g = (uint8_t)go; led_buffer[i].b = (uint8_t)bo; } # endif // USE_MASSDROP_CONFIGURATOR -#endif // RGB_MATRIX_ENABLE
\ No newline at end of file +#endif // RGB_MATRIX_ENABLE |