summaryrefslogtreecommitdiff
path: root/tmk_core/common/chibios
diff options
context:
space:
mode:
Diffstat (limited to 'tmk_core/common/chibios')
-rw-r--r--tmk_core/common/chibios/eeprom_stm32.c110
-rw-r--r--tmk_core/common/chibios/eeprom_stm32_defs.h61
2 files changed, 98 insertions, 73 deletions
diff --git a/tmk_core/common/chibios/eeprom_stm32.c b/tmk_core/common/chibios/eeprom_stm32.c
index 64d7d79ba0..1fdf8c1e29 100644
--- a/tmk_core/common/chibios/eeprom_stm32.c
+++ b/tmk_core/common/chibios/eeprom_stm32.c
@@ -51,13 +51,13 @@
*
* The following configuration defines can be set:
*
- * FEE_DENSITY_PAGES # Total number of pages to use for eeprom simulation (Compact + Write log)
- * FEE_DENSITY_BYTES # Size of simulated eeprom. (Defaults to half the space allocated by FEE_DENSITY_PAGES)
+ * FEE_PAGE_COUNT # Total number of pages to use for eeprom simulation (Compact + Write log)
+ * FEE_DENSITY_BYTES # Size of simulated eeprom. (Defaults to half the space allocated by FEE_PAGE_COUNT)
* NOTE: The current implementation does not include page swapping,
* and FEE_DENSITY_BYTES will consume that amount of RAM as a cached view of actual EEPROM contents.
*
* The maximum size of FEE_DENSITY_BYTES is currently 16384. The write log size equals
- * FEE_DENSITY_PAGES * FEE_PAGE_SIZE - FEE_DENSITY_BYTES.
+ * FEE_PAGE_COUNT * FEE_PAGE_SIZE - FEE_DENSITY_BYTES.
* The larger the write log, the less frequently the compacted area needs to be rewritten.
*
*
@@ -132,6 +132,11 @@
*
*/
+#include "eeprom_stm32_defs.h"
+#if !defined(FEE_PAGE_SIZE) || !defined(FEE_PAGE_COUNT) || !defined(FEE_MCU_FLASH_SIZE) || !defined(FEE_PAGE_BASE_ADDRESS)
+# error "not implemented."
+#endif
+
/* These bits are used for optimizing encoding of bytes, 0 and 1 */
#define FEE_WORD_ENCODING 0x8000
#define FEE_VALUE_NEXT 0x6000
@@ -139,65 +144,19 @@
#define FEE_VALUE_ENCODED 0x2000
#define FEE_BYTE_RANGE 0x80
-// HACK ALERT. This definition may not match your processor
-// To Do. Work out correct value for EEPROM_PAGE_SIZE on the STM32F103CT6 etc
-#if defined(EEPROM_EMU_STM32F303xC)
-# define MCU_STM32F303CC
-#elif defined(EEPROM_EMU_STM32F103xB)
-# define MCU_STM32F103RB
-#elif defined(EEPROM_EMU_STM32F072xB)
-# define MCU_STM32F072CB
-#elif defined(EEPROM_EMU_STM32F042x6)
-# define MCU_STM32F042K6
-#elif !defined(FEE_PAGE_SIZE) || !defined(FEE_DENSITY_PAGES) || !defined(FEE_MCU_FLASH_SIZE)
-# error "not implemented."
-#endif
-
-#if !defined(FEE_PAGE_SIZE) || !defined(FEE_DENSITY_PAGES)
-# if defined(MCU_STM32F103RB) || defined(MCU_STM32F042K6)
-# ifndef FEE_PAGE_SIZE
-# define FEE_PAGE_SIZE 0x400 // Page size = 1KByte
-# endif
-# ifndef FEE_DENSITY_PAGES
-# define FEE_DENSITY_PAGES 2 // How many pages are used
-# endif
-# elif defined(MCU_STM32F103ZE) || defined(MCU_STM32F103RE) || defined(MCU_STM32F103RD) || defined(MCU_STM32F303CC) || defined(MCU_STM32F072CB)
-# ifndef FEE_PAGE_SIZE
-# define FEE_PAGE_SIZE 0x800 // Page size = 2KByte
-# endif
-# ifndef FEE_DENSITY_PAGES
-# define FEE_DENSITY_PAGES 4 // How many pages are used
-# endif
-# else
-# error "No MCU type specified. Add something like -DMCU_STM32F103RB to your compiler arguments (probably in a Makefile)."
-# endif
-#endif
+/* Addressable range 16KByte: 0 <-> (0x1FFF << 1) */
+#define FEE_ADDRESS_MAX_SIZE 0x4000
-#ifndef FEE_MCU_FLASH_SIZE
-# if defined(MCU_STM32F103RB) || defined(MCU_STM32F072CB)
-# define FEE_MCU_FLASH_SIZE 128 // Size in Kb
-# elif defined(MCU_STM32F042K6)
-# define FEE_MCU_FLASH_SIZE 32 // Size in Kb
-# elif defined(MCU_STM32F103ZE) || defined(MCU_STM32F103RE)
-# define FEE_MCU_FLASH_SIZE 512 // Size in Kb
-# elif defined(MCU_STM32F103RD)
-# define FEE_MCU_FLASH_SIZE 384 // Size in Kb
-# elif defined(MCU_STM32F303CC)
-# define FEE_MCU_FLASH_SIZE 256 // Size in Kb
-# else
-# error "No MCU type specified. Add something like -DMCU_STM32F103RB to your compiler arguments (probably in a Makefile)."
-# endif
-#endif
+/* Flash word value after erase */
+#define FEE_EMPTY_WORD ((uint16_t)0xFFFF)
/* Size of combined compacted eeprom and write log pages */
-#define FEE_DENSITY_MAX_SIZE (FEE_DENSITY_PAGES * FEE_PAGE_SIZE)
-/* Addressable range 16KByte: 0 <-> (0x1FFF << 1) */
-#define FEE_ADDRESS_MAX_SIZE 0x4000
+#define FEE_DENSITY_MAX_SIZE (FEE_PAGE_COUNT * FEE_PAGE_SIZE)
-#ifndef EEPROM_START_ADDRESS /* *TODO: Get rid of this check */
+#ifndef FEE_MCU_FLASH_SIZE_IGNORE_CHECK /* *TODO: Get rid of this check */
# if FEE_DENSITY_MAX_SIZE > (FEE_MCU_FLASH_SIZE * 1024)
# pragma message STR(FEE_DENSITY_MAX_SIZE) " > " STR(FEE_MCU_FLASH_SIZE * 1024)
-# error emulated eeprom: FEE_DENSITY_PAGES is greater than available flash size
+# error emulated eeprom: FEE_DENSITY_MAX_SIZE is greater than available flash size
# endif
#endif
@@ -220,27 +179,32 @@
# endif
#else
/* Default to half of allocated space used for emulated eeprom, half for write log */
-# define FEE_DENSITY_BYTES (FEE_DENSITY_PAGES * FEE_PAGE_SIZE / 2)
+# define FEE_DENSITY_BYTES (FEE_PAGE_COUNT * FEE_PAGE_SIZE / 2)
#endif
/* Size of write log */
-#define FEE_WRITE_LOG_BYTES (FEE_DENSITY_PAGES * FEE_PAGE_SIZE - FEE_DENSITY_BYTES)
+#ifdef FEE_WRITE_LOG_BYTES
+# if ((FEE_DENSITY_BYTES + FEE_WRITE_LOG_BYTES) > FEE_DENSITY_MAX_SIZE)
+# pragma message STR(FEE_DENSITY_BYTES) " + " STR(FEE_WRITE_LOG_BYTES) " > " STR(FEE_DENSITY_MAX_SIZE)
+# error emulated eeprom: FEE_WRITE_LOG_BYTES exceeds remaining FEE_DENSITY_MAX_SIZE
+# endif
+# if ((FEE_WRITE_LOG_BYTES) % 2) == 1
+# error emulated eeprom: FEE_WRITE_LOG_BYTES must be even
+# endif
+#else
+/* Default to use all remaining space */
+# define FEE_WRITE_LOG_BYTES (FEE_PAGE_COUNT * FEE_PAGE_SIZE - FEE_DENSITY_BYTES)
+#endif
/* Start of the emulated eeprom compacted flash area */
-#ifndef FEE_FLASH_BASE
-# define FEE_FLASH_BASE 0x8000000
-#endif
-#define FEE_PAGE_BASE_ADDRESS ((uintptr_t)(FEE_FLASH_BASE) + FEE_MCU_FLASH_SIZE * 1024 - FEE_WRITE_LOG_BYTES - FEE_DENSITY_BYTES)
+#define FEE_COMPACTED_BASE_ADDRESS FEE_PAGE_BASE_ADDRESS
/* End of the emulated eeprom compacted flash area */
-#define FEE_PAGE_LAST_ADDRESS (FEE_PAGE_BASE_ADDRESS + FEE_DENSITY_BYTES)
+#define FEE_COMPACTED_LAST_ADDRESS (FEE_COMPACTED_BASE_ADDRESS + FEE_DENSITY_BYTES)
/* Start of the emulated eeprom write log */
-#define FEE_WRITE_LOG_BASE_ADDRESS FEE_PAGE_LAST_ADDRESS
+#define FEE_WRITE_LOG_BASE_ADDRESS FEE_COMPACTED_LAST_ADDRESS
/* End of the emulated eeprom write log */
#define FEE_WRITE_LOG_LAST_ADDRESS (FEE_WRITE_LOG_BASE_ADDRESS + FEE_WRITE_LOG_BYTES)
-/* Flash word value after erase */
-#define FEE_EMPTY_WORD ((uint16_t)0xFFFF)
-
#if defined(DYNAMIC_KEYMAP_EEPROM_MAX_ADDR) && (DYNAMIC_KEYMAP_EEPROM_MAX_ADDR >= FEE_DENSITY_BYTES)
# error emulated eeprom: DYNAMIC_KEYMAP_EEPROM_MAX_ADDR is greater than the FEE_DENSITY_BYTES available
#endif
@@ -313,9 +277,9 @@ void print_eeprom(void) {
uint16_t EEPROM_Init(void) {
/* Load emulated eeprom contents from compacted flash into memory */
- uint16_t *src = (uint16_t *)FEE_PAGE_BASE_ADDRESS;
+ uint16_t *src = (uint16_t *)FEE_COMPACTED_BASE_ADDRESS;
uint16_t *dest = (uint16_t *)DataBuf;
- for (; src < (uint16_t *)FEE_PAGE_LAST_ADDRESS; ++src, ++dest) {
+ for (; src < (uint16_t *)FEE_COMPACTED_LAST_ADDRESS; ++src, ++dest) {
*dest = ~*src;
}
@@ -390,7 +354,7 @@ uint16_t EEPROM_Init(void) {
static void eeprom_clear(void) {
FLASH_Unlock();
- for (uint16_t page_num = 0; page_num < FEE_DENSITY_PAGES; ++page_num) {
+ for (uint16_t page_num = 0; page_num < FEE_PAGE_COUNT; ++page_num) {
eeprom_printf("FLASH_ErasePage(0x%04x)\n", (uint32_t)(FEE_PAGE_BASE_ADDRESS + (page_num * FEE_PAGE_SIZE)));
FLASH_ErasePage(FEE_PAGE_BASE_ADDRESS + (page_num * FEE_PAGE_SIZE));
}
@@ -421,9 +385,9 @@ static uint8_t eeprom_compact(void) {
/* Write emulated eeprom contents from memory to compacted flash */
uint16_t *src = (uint16_t *)DataBuf;
- uintptr_t dest = FEE_PAGE_BASE_ADDRESS;
+ uintptr_t dest = FEE_COMPACTED_BASE_ADDRESS;
uint16_t value;
- for (; dest < FEE_PAGE_LAST_ADDRESS; ++src, dest += 2) {
+ for (; dest < FEE_COMPACTED_LAST_ADDRESS; ++src, dest += 2) {
value = *src;
if (value) {
eeprom_printf("FLASH_ProgramHalfWord(0x%04x, 0x%04x)\n", (uint32_t)dest, ~value);
@@ -444,7 +408,7 @@ static uint8_t eeprom_compact(void) {
static uint8_t eeprom_write_direct_entry(uint16_t Address) {
/* Check if we can just write this directly to the compacted flash area */
- uintptr_t directAddress = FEE_PAGE_BASE_ADDRESS + (Address & 0xFFFE);
+ uintptr_t directAddress = FEE_COMPACTED_BASE_ADDRESS + (Address & 0xFFFE);
if (*(uint16_t *)directAddress == FEE_EMPTY_WORD) {
/* Write the value directly to the compacted area without a log entry */
uint16_t value = ~*(uint16_t *)(&DataBuf[Address & 0xFFFE]);
diff --git a/tmk_core/common/chibios/eeprom_stm32_defs.h b/tmk_core/common/chibios/eeprom_stm32_defs.h
new file mode 100644
index 0000000000..a775ec201a
--- /dev/null
+++ b/tmk_core/common/chibios/eeprom_stm32_defs.h
@@ -0,0 +1,61 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include <hal.h>
+
+#if !defined(FEE_PAGE_SIZE) || !defined(FEE_PAGE_COUNT)
+# if defined(STM32F103xB) || defined(STM32F042x6)
+# ifndef FEE_PAGE_SIZE
+# define FEE_PAGE_SIZE 0x400 // Page size = 1KByte
+# endif
+# ifndef FEE_PAGE_COUNT
+# define FEE_PAGE_COUNT 2 // How many pages are used
+# endif
+# elif defined(STM32F103xE) || defined(STM32F303xC) || defined(STM32F072xB)
+# ifndef FEE_PAGE_SIZE
+# define FEE_PAGE_SIZE 0x800 // Page size = 2KByte
+# endif
+# ifndef FEE_PAGE_COUNT
+# define FEE_PAGE_COUNT 4 // How many pages are used
+# endif
+# endif
+#endif
+
+#if !defined(FEE_MCU_FLASH_SIZE)
+# if defined(STM32F042x6)
+# define FEE_MCU_FLASH_SIZE 32 // Size in Kb
+# elif defined(STM32F103xB) || defined(STM32F072xB)
+# define FEE_MCU_FLASH_SIZE 128 // Size in Kb
+# elif defined(STM32F303xC)
+# define FEE_MCU_FLASH_SIZE 256 // Size in Kb
+# elif defined(STM32F103xE)
+# define FEE_MCU_FLASH_SIZE 512 // Size in Kb
+# endif
+#endif
+
+/* Start of the emulated eeprom */
+#if !defined(FEE_PAGE_BASE_ADDRESS)
+# if 0
+/* TODO: Add support for F4 */
+# else
+# ifndef FEE_FLASH_BASE
+# define FEE_FLASH_BASE 0x8000000
+# endif
+/* Default to end of flash */
+# define FEE_PAGE_BASE_ADDRESS ((uintptr_t)(FEE_FLASH_BASE) + FEE_MCU_FLASH_SIZE * 1024 - (FEE_PAGE_COUNT * FEE_PAGE_SIZE))
+# endif
+#endif