diff options
Diffstat (limited to 'terminal_usb')
| -rw-r--r-- | terminal_usb/Makefile.102_pjrc | 56 | ||||
| -rw-r--r-- | terminal_usb/Makefile.122_pjrc | 56 | ||||
| -rw-r--r-- | terminal_usb/README | 34 | ||||
| -rw-r--r-- | terminal_usb/config_102_pjrc.h | 58 | ||||
| -rw-r--r-- | terminal_usb/config_122_pjrc.h | 58 | ||||
| -rw-r--r-- | terminal_usb/keymap_102.c | 208 | ||||
| -rw-r--r-- | terminal_usb/keymap_122.c | 143 | ||||
| -rw-r--r-- | terminal_usb/led.c | 33 | ||||
| -rw-r--r-- | terminal_usb/matrix.c | 226 |
9 files changed, 872 insertions, 0 deletions
diff --git a/terminal_usb/Makefile.102_pjrc b/terminal_usb/Makefile.102_pjrc new file mode 100644 index 0000000000..c1fd397f6c --- /dev/null +++ b/terminal_usb/Makefile.102_pjrc @@ -0,0 +1,56 @@ +# +# Makefile for PJRC Teensy +# + + +# Target file name (without extension). +TARGET = terminal_usb_102_pjrc + +# Directory common source filess exist +COMMON_DIR = .. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = main.c \ + keymap_102.c \ + matrix.c \ + led.c \ + ps2.c + +CONFIG_H = config_102_pjrc.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +#MCU = at90usb1286 # Teensy++ 2.0 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Build Options +# *Comment out* to disable the options. +# +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +NKRO_ENABLE = yes # USB Nkey Rollover + + + +#---------------- Programming Options -------------------------- +PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex + + + +include $(COMMON_DIR)/pjrc.mk +include $(COMMON_DIR)/common.mk diff --git a/terminal_usb/Makefile.122_pjrc b/terminal_usb/Makefile.122_pjrc new file mode 100644 index 0000000000..b91e484ff2 --- /dev/null +++ b/terminal_usb/Makefile.122_pjrc @@ -0,0 +1,56 @@ +# +# Makefile for PJRC Teensy +# + + +# Target file name (without extension). +TARGET = terminal_usb_122_pjrc + +# Directory common source filess exist +COMMON_DIR = .. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = main.c \ + keymap_122.c \ + matrix.c \ + led.c \ + ps2.c + +CONFIG_H = config_122_pjrc.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +#MCU = at90usb1286 # Teensy++ 2.0 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Build Options +# *Comment out* to disable the options. +# +#MOUSEKEY_ENABLE = yes # Mouse keys +#EXTRAKEY_ENABLE = yes # Audio control and System control +#NKRO_ENABLE = yes # USB Nkey Rollover + + + +#---------------- Programming Options -------------------------- +PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex + + + +include $(COMMON_DIR)/pjrc.mk +include $(COMMON_DIR)/common.mk diff --git a/terminal_usb/README b/terminal_usb/README new file mode 100644 index 0000000000..454f0ec182 --- /dev/null +++ b/terminal_usb/README @@ -0,0 +1,34 @@ +PS/2 to USB keyboard converter for IBM terminal keyboard +========================================================= +It supports PS/2 Scan Code Set 3 and runs on Teensy, Teensy++ and boards withATMega32u4/AT90USB. +I tested the converter only on Teensy with 1392595(102keys terminal keyboard), though, I think it will also work with 122keys boards. + + + +CONNECTION +---------- +Data: PD0 +Clock: PD1 + +It is same as Soarer's converter pin configuration. +http://geekhack.org/showwiki.php?title=Island:17458 + + + +BUILD +----- +For 102keys: +$ make -f Makefile.102_pjrc + +For 122keys(not tested): +$ make -f Makefile.122_pjrc + + +I used WinAVR 20100110 to develop. + + + +RESOURCE +-------- +WinAVR: http://winavr.sourceforge.net/ +1392595: http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M diff --git a/terminal_usb/config_102_pjrc.h b/terminal_usb/config_102_pjrc.h new file mode 100644 index 0000000000..2dce04af7d --- /dev/null +++ b/terminal_usb/config_102_pjrc.h @@ -0,0 +1,58 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +/* controller configuration */ +#include "controller_teensy.h" + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6531 +#define MANUFACTURER t.m.k. +#define PRODUCT PS/2(Set3)-USB Keyboard converter(IBM 102keys) +#define DESCRIPTION USB converter for IBM Terminal Keyboard 102keys + + +/* matrix size */ +#define MATRIX_ROWS 17 // keycode bit: 3-0 +#define MATRIX_COLS 8 // keycode bit: 6-4 + + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KB_RALT) | MOD_BIT(KB_RCTL)) \ +) + + +/* mouse keys */ +#ifdef MOUSEKEY_ENABLE +# define MOUSEKEY_DELAY_TIME 255 +#endif + + +/* PS/2 lines */ +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 1 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 0 + +#endif diff --git a/terminal_usb/config_122_pjrc.h b/terminal_usb/config_122_pjrc.h new file mode 100644 index 0000000000..43691bd71c --- /dev/null +++ b/terminal_usb/config_122_pjrc.h @@ -0,0 +1,58 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +/* controller configuration */ +#include "controller_teensy.h" + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6532 +#define MANUFACTURER t.m.k. +#define PRODUCT PS/2(Set3)-USB Keyboard converter(IBM 122keys) +#define DESCRIPTION USB converter for IBM Terminal Keyboard 122keys + + +/* matrix size */ +#define MATRIX_ROWS 17 // keycode bit: 3-0 +#define MATRIX_COLS 8 // keycode bit: 6-4 + + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KB_RALT) | MOD_BIT(KB_RCTL)) \ +) + + +/* mouse keys */ +#ifdef MOUSEKEY_ENABLE +# define MOUSEKEY_DELAY_TIME 255 +#endif + + +/* PS/2 lines */ +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 1 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 0 + +#endif diff --git a/terminal_usb/keymap_102.c b/terminal_usb/keymap_102.c new file mode 100644 index 0000000000..e022acd21a --- /dev/null +++ b/terminal_usb/keymap_102.c @@ -0,0 +1,208 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <stdbool.h> +#include <avr/pgmspace.h> +#include "usb_keycodes.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "keymap.h" + + + + +/* + * IBM Terminal keyboard 1392595(102keys) + * http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M + * http://www.seasip.info/VintagePC/ibm_1391406.html + * + * Keymap array: + * 8 bytes + * +---------+ + * 0| | + * :| | 0x00-0x87 + * ;| | + * 17| | + * +---------+ + */ +#define KEYMAP( \ + K08, K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E, K57,K5F,K62, \ + \ + K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K5D,K66, K67,K6E,K6F, K76,K77,K7E,K84, \ + K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, K5C, K64,K65,K6D, K6C,K75,K7D,K7C, \ + K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K53,K5A, K6B,K73,K74,K7B, \ + K12,K13,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K51,K59, K63, K69,K72,K7A,K79, \ + K11, K19, K29, K39, K58, K61,K60,K6A, K68,K70,K71,K78 \ +) { \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##K07 }, \ + { KB_##K08, KB_NO, KB_NO, KB_NO, KB_NO, KB_##K0D, KB_##K0E, KB_##K0F }, \ + { KB_NO, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \ + { KB_NO, KB_##K19, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_##K1F }, \ + { KB_NO, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \ + { KB_NO, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \ + { KB_NO, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_##K37 }, \ + { KB_NO, KB_##K39, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_##K3F }, \ + { KB_NO, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_##K47 }, \ + { KB_NO, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_##K4F }, \ + { KB_NO, KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \ + { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_##K5C, KB_##K5D, KB_##K5E, KB_##K5F }, \ + { KB_NO, KB_##K61, KB_##K62, KB_##K63, KB_##K64, KB_##K65, KB_##K66, KB_##K67 }, \ + { KB_##K68, KB_##K69, KB_##K6A, KB_##K6B, KB_##K6C, KB_##K6D, KB_##K6E, KB_##K6F }, \ + { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \ + { KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_##K7C, KB_##K7D, KB_##K7E, KB_NO }, \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_##K84, KB_NO, KB_NO, KB_NO, }, \ +} + + +// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed. +static const uint8_t PROGMEM fn_layer[] = { + 1, // Fn0 + 2, // Fn1 + 3, // Fn2 + 0, // Fn3 + 0, // Fn4 + 0, // Fn5 + 0, // Fn6 + 0 // Fn7 +}; + +// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. +// See layer.c for details. +static const uint8_t PROGMEM fn_keycode[] = { + KB_SCLN, // Fn0 + KB_SLSH, // Fn1 + KB_ESC, // Fn2 + KB_NO, // Fn3 + KB_NO, // Fn4 + KB_NO, // Fn5 + KB_NO, // Fn6 + KB_NO // Fn7 +}; + + +static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: default + * ,---. ,---------------. ,---------------. ,---------------. ,-----------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| + * `---' `---------------' `---------------' `---------------' `-----------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \|BS | |Ins|Hom|PgU| |NmL| /| *| -| + * |-----------------------------------------------------------| |-----------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| | + * |-----------------------------------------------------------| `-----------' |-----------| +| + * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '| #|Retu| | 4| 5| 6| | + * |-----------------------------------------------------------| ,---. |---------------| + * |Shif| \| Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | + * |-----------------------------------------------------------| ,-----------. |-----------|Ent| + * |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| | + * `----' `---------------------------------------' `----' `-----------' `---------------' + */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, + LCTL,A, S, D, F, G, H, J, K, L, FN0, QUOT, NUHS,ENT, P4, P5, P6, PCMM, + LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, FN1, RO, FN2, UP, P1, P2, P3, PENT, + LGUI, LALT, SPC, RALT, RCTL, LEFT,DOWN,RGHT, NO, P0, PDOT,NO + ), + + /* 1: Mouse keys + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa| + * |-----------------------------------------------------------| + * |Tab |MwL|MwU|McU|WwU|WwR|MwL|MwD|MwU|MwR| | | | \| + * |-----------------------------------------------------------| + * |CapsLo| |McL|McD|McR| |McL|McD|McU|McR|Fn0| |Return | + * |-----------------------------------------------------------| + * |Shift |VoD|VoU|Mut|Mb2|Mb3|Mb2|Mb1|VoD|VoU|Mut|Shift | + * |-----------------------------------------------------------| + * |Ctrl | |Alt | Mb1 |Alt | |Ctrl| + * `-----' `--------------------------------------' `----' + * Mc = mouse cursor, Mw = mouse wheel, Mb = mouse button + * Vo = Volume, Mut = Mute + */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, NO, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, + LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, NO, ENT, P4, P5, P6, PCMM, + LSFT,NO, VOLD,VOLU,MUTE,BTN2,BTN3,BTN2,BTN1,VOLD,VOLU,MUTE, NO, RSFT, UP, P1, P2, P3, PENT, + LGUI, LALT, BTN1, RALT, RCTL, LEFT,DOWN,RGHT, NO, P0, PDOT,NO + ), + + /* 2: Cursor keys + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa| + * |-----------------------------------------------------------| + * |Tab |Hom|PgU| Up|PgU|End|Hom|PgD|PgU|End| | | | \| + * |-----------------------------------------------------------| + * |CapsLo| |Lef|Dow|Rig| |Lef|Dow| Up|Rig| | |Return | + * |-----------------------------------------------------------| + * |Shift | | | | | |Hom|PgD|PgU|End|Fn1|Shift | + * |-----------------------------------------------------------| + * |Ctrl | |Alt | Space |Alt | |Ctrl| + * `-----' `--------------------------------------' `----' + */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, NO, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, PMNS, + LCTL,NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, NO, ENT, P4, P5, P6, PCMM, + LSFT,NO, VOLD,VOLU,MUTE,NO, NO, HOME,PGDN,PGUP,END, FN1, NO, RSFT, UP, P1, P2, P3, PENT, + LGUI, LALT, SPC, RALT, RCTL, LEFT,DOWN,RGHT, NO, P0, PDOT,NO + ), + + /* 3: HHKB + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs| + * |-----------------------------------------------------------| + * |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter | + * |-----------------------------------------------------------| + * |Shift | | | | | | +| -|End|PgD|Dow|Fn2 | + * |-----------------------------------------------------------| + * |Ctrl | |Alt | Space |Alt | |Ctrl| + * `-----' `--------------------------------------' `----' + */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, NO, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, + LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT, NO, ENT, P4, P5, P6, PCMM, + LSFT,NO, NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN, NO, FN2, UP, P1, P2, P3, PENT, + LGUI, LALT, SPC, RALT, RCTL, LEFT,DOWN,RGHT, NO, P0, PDOT,NO + ), +}; + + +uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col) +{ + return pgm_read_byte(&keymaps[(layer)][(row)][(col)]); +} + +uint8_t keymap_fn_layer(uint8_t fn_bits) +{ + return pgm_read_byte(&fn_layer[biton(fn_bits)]); +} + +uint8_t keymap_fn_keycode(uint8_t fn_bits) +{ + return pgm_read_byte(&fn_keycode[(biton(fn_bits))]); +} diff --git a/terminal_usb/keymap_122.c b/terminal_usb/keymap_122.c new file mode 100644 index 0000000000..8db09ee731 --- /dev/null +++ b/terminal_usb/keymap_122.c @@ -0,0 +1,143 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <stdbool.h> +#include <avr/pgmspace.h> +#include "usb_keycodes.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "keymap.h" + + + + +/* + * IBM Terminal keyboard 1392595(102keys) + * http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M + * http://www.seasip.info/VintagePC/ibm_1391406.html + * + * Keymap array: + * 8 bytes + * +---------+ + * 0| | + * :| | 0x00-0x87 + * ;| | + * 17| | + * +---------+ + */ +#define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{ \ + { KB_NO, KB_##K01, KB_NO, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \ + { KB_##K08, KB_##K09, KB_##K0A, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_##K0F }, \ + { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \ + { KB_##K18, KB_##K19, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_##K1F }, \ + { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \ + { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \ + { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_##K37 }, \ + { KB_##K38, KB_##K39, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_##K3F }, \ + { KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_##K47 }, \ + { KB_##K48, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_##K4F }, \ + { KB_##K50, KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \ + { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_##K5C, KB_##K5D, KB_##K5E, KB_##K5F }, \ + { KB_##K60, KB_##K61, KB_##K62, KB_##K63, KB_##K64, KB_##K65, KB_##K66, KB_##K67 }, \ + { KB_##K68, KB_##K69, KB_##K6A, KB_##K6B, KB_##K6C, KB_##K6D, KB_##K6E, KB_##K6F }, \ + { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \ + { KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_##K7C, KB_##K7D, KB_##K7E, KB_NO }, \ + { KB_NO, KB_NO, KB_NO, KB_##K83, KB_##K84, KB_NO, KB_NO, KB_NO, }, \ +} + + +// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed. +static const uint8_t PROGMEM fn_layer[] = { + 0, // Fn0 + 0, // Fn1 + 0, // Fn2 + 0, // Fn3 + 0, // Fn4 + 0, // Fn5 + 0, // Fn6 + 0 // Fn7 +}; + +// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. +// See layer.c for details. +static const uint8_t PROGMEM fn_keycode[] = { + KB_NO, // Fn0 + KB_NO, // Fn1 + KB_NO, // Fn2 + KB_NO, // Fn3 + KB_NO, // Fn4 + KB_NO, // Fn5 + KB_NO, // Fn6 + KB_NO // Fn7 +}; + + +static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: default + * ,---. ,---------------. ,---------------. ,---------------. ,-----------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| + * `---' `---------------' `---------------' `---------------' `-----------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \|BS | |Ins|Hom|PgU| |NmL| /| *| -| + * |-----------------------------------------------------------| |-----------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| | + * |-----------------------------------------------------------| `-----------' |-----------| +| + * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '| #|Retu| | 4| 5| 6| | + * |-----------------------------------------------------------| ,---. |---------------| + * |Shif| \| Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | + * |-----------------------------------------------------------| ,-----------. |-----------|Ent| + * |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| | + * `----' `---------------------------------------' `----' `-----------' `---------------' + */ + KEYMAP( + F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, + F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, + + PSCR,ESC, GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + SLCK,INT4, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, + PAUS,INT5, CAPS,A, S, D, F, G, H, J, K, L, FN0, QUOT, NUHS,ENT, UP, P4, P5, P6, PCMM, + APP, INT6, LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, FN1, RO, FN2, LEFT,INT2,RGHT, P1, P2, P3, PENT, + RGUI,LGUI, LCTL, LALT, SPC, RALT, RCTL, DOWN, NO, P0, PDOT,NO + ), +}; + + +uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col) +{ + return pgm_read_byte(&keymaps[(layer)][(row)][(col)]); +} + +uint8_t keymap_fn_layer(uint8_t fn_bits) +{ + return pgm_read_byte(&fn_layer[biton(fn_bits)]); +} + +uint8_t keymap_fn_keycode(uint8_t fn_bits) +{ + return pgm_read_byte(&fn_keycode[(biton(fn_bits))]); +} diff --git a/terminal_usb/led.c b/terminal_usb/led.c new file mode 100644 index 0000000000..e448e84ec7 --- /dev/null +++ b/terminal_usb/led.c @@ -0,0 +1,33 @@ +/* +Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "stdint.h" +#include "ps2.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ + uint8_t ps2_led = 0; + if (usb_led & (1<<USB_LED_SCROLL_LOCK)) + ps2_led |= (1<<PS2_LED_SCROLL_LOCK); + if (usb_led & (1<<USB_LED_NUM_LOCK)) + ps2_led |= (1<<PS2_LED_NUM_LOCK); + if (usb_led & (1<<USB_LED_CAPS_LOCK)) + ps2_led |= (1<<PS2_LED_CAPS_LOCK); + ps2_host_set_led(ps2_led); +} diff --git a/terminal_usb/matrix.c b/terminal_usb/matrix.c new file mode 100644 index 0000000000..a6eff8c1ec --- /dev/null +++ b/terminal_usb/matrix.c @@ -0,0 +1,226 @@ +/* +Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "print.h" +#include "util.h" +#include "debug.h" +#include "ps2.h" +#include "matrix.h" + + +static void matrix_make(uint8_t code); +static void matrix_break(uint8_t code); +#ifdef MATRIX_HAS_GHOST +static bool matrix_has_ghost_in_row(uint8_t row); +#endif + + +/* + * Matrix Array usage: + * 'Scan Code Set 3' is assigned into 17x8 cell matrix. + * + * 8bit wide + * +---------+ + * 0| | + * :| | 0x00-0x87 + * ;| | + * 17| | + * +---------+ + */ +static uint8_t matrix[MATRIX_ROWS]; +#define ROW(code) (code>>3) +#define COL(code) (code&0x07) + +static bool is_modified = false; + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + print_enable = true; + debug_enable = true; + //debug_matrix = true; + //debug_keyboard = true; + //debug_mouse = false; + + ps2_host_init(); + // Make and Break code without Typematic + while (ps2_host_send(0xF8) != 0xFA) { + debug("send F8: failed\n"); + _delay_ms(500); + } + debug("send F8: OK\n"); + + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; + + return; +} + +uint8_t matrix_scan(void) +{ + + // scan code reading states + static enum { + INIT, + F0, + } state = INIT; + + + is_modified = false; + + uint8_t code; + while ((code = ps2_host_recv())) { + debug_hex(code); + switch (state) { + case INIT: + switch (code) { + case 0xF0: + state = F0; + debug(" "); + break; + default: // normal key make + if (code < 0x88) { + matrix_make(code); + } else { + debug("unexpected scan code at INIT: "); debug_hex(code); debug("\n"); + } + state = INIT; + debug("\n"); + } + break; + case F0: // Break code + switch (code) { + default: + if (code < 0x88) { + matrix_break(code); + } else { + debug("unexpected scan code at F0: "); debug_hex(code); debug("\n"); + } + state = INIT; + debug("\n"); + } + break; + } + } + return 1; +} + +bool matrix_is_modified(void) +{ + return is_modified; +} + +inline +bool matrix_has_ghost(void) +{ +#ifdef MATRIX_HAS_GHOST + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + if (matrix_has_ghost_in_row(i)) + return true; + } +#endif + return false; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & (1<<col)); +} + +inline +uint8_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 01234567\n"); + for (uint8_t row = 0; row < matrix_rows(); row++) { + phex(row); print(": "); + pbin_reverse(matrix_get_row(row)); +#ifdef MATRIX_HAS_GHOST + if (matrix_has_ghost_in_row(row)) { + print(" <ghost"); + } +#endif + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop(matrix[i]); + } + return count; +} + +#ifdef MATRIX_HAS_GHOST +inline +static bool matrix_has_ghost_in_row(uint8_t row) +{ + // no ghost exists in case less than 2 keys on + if (((matrix[row] - 1) & matrix[row]) == 0) + return false; + + // ghost exists in case same state as other row + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + if (i != row && (matrix[i] & matrix[row]) == matrix[row]) + return true; + } + return false; +} +#endif + + +inline +static void matrix_make(uint8_t code) +{ + if (!matrix_is_on(ROW(code), COL(code))) { + matrix[ROW(code)] |= 1<<COL(code); + is_modified = true; + } +} + +inline +static void matrix_break(uint8_t code) +{ + if (matrix_is_on(ROW(code), COL(code))) { + matrix[ROW(code)] &= ~(1<<COL(code)); + is_modified = true; + } +} |