summaryrefslogtreecommitdiff
path: root/quantum/split_common
diff options
context:
space:
mode:
Diffstat (limited to 'quantum/split_common')
-rw-r--r--quantum/split_common/serial.c508
-rw-r--r--quantum/split_common/serial.h62
2 files changed, 0 insertions, 570 deletions
diff --git a/quantum/split_common/serial.c b/quantum/split_common/serial.c
deleted file mode 100644
index c27cbfdd0a..0000000000
--- a/quantum/split_common/serial.c
+++ /dev/null
@@ -1,508 +0,0 @@
-/*
- * WARNING: be careful changing this code, it is very timing dependent
- *
- * 2018-10-28 checked
- * avr-gcc 4.9.2
- * avr-gcc 5.4.0
- * avr-gcc 7.3.0
- */
-
-#ifndef F_CPU
-# define F_CPU 16000000
-#endif
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <stddef.h>
-#include <stdbool.h>
-#include "serial.h"
-
-#ifdef SOFT_SERIAL_PIN
-
-# ifdef __AVR_ATmega32U4__
-// if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial.
-# ifdef USE_AVR_I2C
-# if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1
-# error Using ATmega32U4 I2C, so can not use PD0, PD1
-# endif
-# endif
-
-# define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
-# define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF))
-# define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
-# define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
-# define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF)))
-
-# if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3
-# if SOFT_SERIAL_PIN == D0
-# define EIMSK_BIT _BV(INT0)
-# define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01)))
-# define SERIAL_PIN_INTERRUPT INT0_vect
-# elif SOFT_SERIAL_PIN == D1
-# define EIMSK_BIT _BV(INT1)
-# define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11)))
-# define SERIAL_PIN_INTERRUPT INT1_vect
-# elif SOFT_SERIAL_PIN == D2
-# define EIMSK_BIT _BV(INT2)
-# define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21)))
-# define SERIAL_PIN_INTERRUPT INT2_vect
-# elif SOFT_SERIAL_PIN == D3
-# define EIMSK_BIT _BV(INT3)
-# define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31)))
-# define SERIAL_PIN_INTERRUPT INT3_vect
-# endif
-# elif SOFT_SERIAL_PIN == E6
-# define EIMSK_BIT _BV(INT6)
-# define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61)))
-# define SERIAL_PIN_INTERRUPT INT6_vect
-# else
-# error invalid SOFT_SERIAL_PIN value
-# endif
-
-# else
-# error serial.c now support ATmega32U4 only
-# endif
-
-# define ALWAYS_INLINE __attribute__((always_inline))
-# define NO_INLINE __attribute__((noinline))
-# define _delay_sub_us(x) __builtin_avr_delay_cycles(x)
-
-// parity check
-# define ODD_PARITY 1
-# define EVEN_PARITY 0
-# define PARITY EVEN_PARITY
-
-# ifdef SERIAL_DELAY
-// custom setup in config.h
-// #define TID_SEND_ADJUST 2
-// #define SERIAL_DELAY 6 // micro sec
-// #define READ_WRITE_START_ADJUST 30 // cycles
-// #define READ_WRITE_WIDTH_ADJUST 8 // cycles
-# else
-// ============ Standard setups ============
-
-# ifndef SELECT_SOFT_SERIAL_SPEED
-# define SELECT_SOFT_SERIAL_SPEED 1
-// 0: about 189kbps (Experimental only)
-// 1: about 137kbps (default)
-// 2: about 75kbps
-// 3: about 39kbps
-// 4: about 26kbps
-// 5: about 20kbps
-# endif
-
-# if __GNUC__ < 6
-# define TID_SEND_ADJUST 14
-# else
-# define TID_SEND_ADJUST 2
-# endif
-
-# if SELECT_SOFT_SERIAL_SPEED == 0
-// Very High speed
-# define SERIAL_DELAY 4 // micro sec
-# if __GNUC__ < 6
-# define READ_WRITE_START_ADJUST 33 // cycles
-# define READ_WRITE_WIDTH_ADJUST 3 // cycles
-# else
-# define READ_WRITE_START_ADJUST 34 // cycles
-# define READ_WRITE_WIDTH_ADJUST 7 // cycles
-# endif
-# elif SELECT_SOFT_SERIAL_SPEED == 1
-// High speed
-# define SERIAL_DELAY 6 // micro sec
-# if __GNUC__ < 6
-# define READ_WRITE_START_ADJUST 30 // cycles
-# define READ_WRITE_WIDTH_ADJUST 3 // cycles
-# else
-# define READ_WRITE_START_ADJUST 33 // cycles
-# define READ_WRITE_WIDTH_ADJUST 7 // cycles
-# endif
-# elif SELECT_SOFT_SERIAL_SPEED == 2
-// Middle speed
-# define SERIAL_DELAY 12 // micro sec
-# define READ_WRITE_START_ADJUST 30 // cycles
-# if __GNUC__ < 6
-# define READ_WRITE_WIDTH_ADJUST 3 // cycles
-# else
-# define READ_WRITE_WIDTH_ADJUST 7 // cycles
-# endif
-# elif SELECT_SOFT_SERIAL_SPEED == 3
-// Low speed
-# define SERIAL_DELAY 24 // micro sec
-# define READ_WRITE_START_ADJUST 30 // cycles
-# if __GNUC__ < 6
-# define READ_WRITE_WIDTH_ADJUST 3 // cycles
-# else
-# define READ_WRITE_WIDTH_ADJUST 7 // cycles
-# endif
-# elif SELECT_SOFT_SERIAL_SPEED == 4
-// Very Low speed
-# define SERIAL_DELAY 36 // micro sec
-# define READ_WRITE_START_ADJUST 30 // cycles
-# if __GNUC__ < 6
-# define READ_WRITE_WIDTH_ADJUST 3 // cycles
-# else
-# define READ_WRITE_WIDTH_ADJUST 7 // cycles
-# endif
-# elif SELECT_SOFT_SERIAL_SPEED == 5
-// Ultra Low speed
-# define SERIAL_DELAY 48 // micro sec
-# define READ_WRITE_START_ADJUST 30 // cycles
-# if __GNUC__ < 6
-# define READ_WRITE_WIDTH_ADJUST 3 // cycles
-# else
-# define READ_WRITE_WIDTH_ADJUST 7 // cycles
-# endif
-# else
-# error invalid SELECT_SOFT_SERIAL_SPEED value
-# endif /* SELECT_SOFT_SERIAL_SPEED */
-# endif /* SERIAL_DELAY */
-
-# define SERIAL_DELAY_HALF1 (SERIAL_DELAY / 2)
-# define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY / 2)
-
-# define SLAVE_INT_WIDTH_US 1
-# ifndef SERIAL_USE_MULTI_TRANSACTION
-# define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
-# else
-# define SLAVE_INT_ACK_WIDTH_UNIT 2
-# define SLAVE_INT_ACK_WIDTH 4
-# endif
-
-static SSTD_t *Transaction_table = NULL;
-static uint8_t Transaction_table_size = 0;
-
-inline static void serial_delay(void) ALWAYS_INLINE;
-inline static void serial_delay(void) { _delay_us(SERIAL_DELAY); }
-
-inline static void serial_delay_half1(void) ALWAYS_INLINE;
-inline static void serial_delay_half1(void) { _delay_us(SERIAL_DELAY_HALF1); }
-
-inline static void serial_delay_half2(void) ALWAYS_INLINE;
-inline static void serial_delay_half2(void) { _delay_us(SERIAL_DELAY_HALF2); }
-
-inline static void serial_output(void) ALWAYS_INLINE;
-inline static void serial_output(void) { setPinOutput(SOFT_SERIAL_PIN); }
-
-// make the serial pin an input with pull-up resistor
-inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
-inline static void serial_input_with_pullup(void) { setPinInputHigh(SOFT_SERIAL_PIN); }
-
-inline static uint8_t serial_read_pin(void) ALWAYS_INLINE;
-inline static uint8_t serial_read_pin(void) { return !!readPin(SOFT_SERIAL_PIN); }
-
-inline static void serial_low(void) ALWAYS_INLINE;
-inline static void serial_low(void) { writePinLow(SOFT_SERIAL_PIN); }
-
-inline static void serial_high(void) ALWAYS_INLINE;
-inline static void serial_high(void) { writePinHigh(SOFT_SERIAL_PIN); }
-
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) {
- Transaction_table = sstd_table;
- Transaction_table_size = (uint8_t)sstd_table_size;
- serial_output();
- serial_high();
-}
-
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) {
- Transaction_table = sstd_table;
- Transaction_table_size = (uint8_t)sstd_table_size;
- serial_input_with_pullup();
-
- // Enable INT0-INT3,INT6
- EIMSK |= EIMSK_BIT;
-# if SOFT_SERIAL_PIN == E6
- // Trigger on falling edge of INT6
- EICRB &= EICRx_BIT;
-# else
- // Trigger on falling edge of INT0-INT3
- EICRA &= EICRx_BIT;
-# endif
-}
-
-// Used by the sender to synchronize timing with the reciver.
-static void sync_recv(void) NO_INLINE;
-static void sync_recv(void) {
- for (uint8_t i = 0; i < SERIAL_DELAY * 5 && serial_read_pin(); i++) {
- }
- // This shouldn't hang if the target disconnects because the
- // serial line will float to high if the target does disconnect.
- while (!serial_read_pin())
- ;
-}
-
-// Used by the reciver to send a synchronization signal to the sender.
-static void sync_send(void) NO_INLINE;
-static void sync_send(void) {
- serial_low();
- serial_delay();
- serial_high();
-}
-
-// Reads a byte from the serial line
-static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE;
-static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) {
- uint8_t byte, i, p, pb;
-
- _delay_sub_us(READ_WRITE_START_ADJUST);
- for (i = 0, byte = 0, p = PARITY; i < bit; i++) {
- serial_delay_half1(); // read the middle of pulses
- if (serial_read_pin()) {
- byte = (byte << 1) | 1;
- p ^= 1;
- } else {
- byte = (byte << 1) | 0;
- p ^= 0;
- }
- _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
- serial_delay_half2();
- }
- /* recive parity bit */
- serial_delay_half1(); // read the middle of pulses
- pb = serial_read_pin();
- _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
- serial_delay_half2();
-
- *pterrcount += (p != pb) ? 1 : 0;
-
- return byte;
-}
-
-// Sends a byte with MSB ordering
-void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE;
-void serial_write_chunk(uint8_t data, uint8_t bit) {
- uint8_t b, p;
- for (p = PARITY, b = 1 << (bit - 1); b; b >>= 1) {
- if (data & b) {
- serial_high();
- p ^= 1;
- } else {
- serial_low();
- p ^= 0;
- }
- serial_delay();
- }
- /* send parity bit */
- if (p & 1) {
- serial_high();
- } else {
- serial_low();
- }
- serial_delay();
-
- serial_low(); // sync_send() / senc_recv() need raise edge
-}
-
-static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
-static void serial_send_packet(uint8_t *buffer, uint8_t size) {
- for (uint8_t i = 0; i < size; ++i) {
- uint8_t data;
- data = buffer[i];
- sync_send();
- serial_write_chunk(data, 8);
- }
-}
-
-static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
-static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) {
- uint8_t pecount = 0;
- for (uint8_t i = 0; i < size; ++i) {
- uint8_t data;
- sync_recv();
- data = serial_read_chunk(&pecount, 8);
- buffer[i] = data;
- }
- return pecount == 0;
-}
-
-inline static void change_sender2reciver(void) {
- sync_send(); // 0
- serial_delay_half1(); // 1
- serial_low(); // 2
- serial_input_with_pullup(); // 2
- serial_delay_half1(); // 3
-}
-
-inline static void change_reciver2sender(void) {
- sync_recv(); // 0
- serial_delay(); // 1
- serial_low(); // 3
- serial_output(); // 3
- serial_delay_half1(); // 4
-}
-
-static inline uint8_t nibble_bits_count(uint8_t bits) {
- bits = (bits & 0x5) + (bits >> 1 & 0x5);
- bits = (bits & 0x3) + (bits >> 2 & 0x3);
- return bits;
-}
-
-// interrupt handle to be used by the target device
-ISR(SERIAL_PIN_INTERRUPT) {
-# ifndef SERIAL_USE_MULTI_TRANSACTION
- serial_low();
- serial_output();
- SSTD_t *trans = Transaction_table;
-# else
- // recive transaction table index
- uint8_t tid, bits;
- uint8_t pecount = 0;
- sync_recv();
- bits = serial_read_chunk(&pecount, 7);
- tid = bits >> 3;
- bits = (bits & 7) != nibble_bits_count(tid);
- if (bits || pecount > 0 || tid > Transaction_table_size) {
- return;
- }
- serial_delay_half1();
-
- serial_high(); // response step1 low->high
- serial_output();
- _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT * SLAVE_INT_ACK_WIDTH);
- SSTD_t *trans = &Transaction_table[tid];
- serial_low(); // response step2 ack high->low
-# endif
-
- // target send phase
- if (trans->target2initiator_buffer_size > 0) serial_send_packet((uint8_t *)trans->target2initiator_buffer, trans->target2initiator_buffer_size);
- // target switch to input
- change_sender2reciver();
-
- // target recive phase
- if (trans->initiator2target_buffer_size > 0) {
- if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer, trans->initiator2target_buffer_size)) {
- *trans->status = TRANSACTION_ACCEPTED;
- } else {
- *trans->status = TRANSACTION_DATA_ERROR;
- }
- } else {
- *trans->status = TRANSACTION_ACCEPTED;
- }
-
- sync_recv(); // weit initiator output to high
-}
-
-/////////
-// start transaction by initiator
-//
-// int soft_serial_transaction(int sstd_index)
-//
-// Returns:
-// TRANSACTION_END
-// TRANSACTION_NO_RESPONSE
-// TRANSACTION_DATA_ERROR
-// this code is very time dependent, so we need to disable interrupts
-# ifndef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_transaction(void) {
- SSTD_t *trans = Transaction_table;
-# else
-int soft_serial_transaction(int sstd_index) {
- if (sstd_index > Transaction_table_size) return TRANSACTION_TYPE_ERROR;
- SSTD_t *trans = &Transaction_table[sstd_index];
-# endif
- cli();
-
- // signal to the target that we want to start a transaction
- serial_output();
- serial_low();
- _delay_us(SLAVE_INT_WIDTH_US);
-
-# ifndef SERIAL_USE_MULTI_TRANSACTION
- // wait for the target response
- serial_input_with_pullup();
- _delay_us(SLAVE_INT_RESPONSE_TIME);
-
- // check if the target is present
- if (serial_read_pin()) {
- // target failed to pull the line low, assume not present
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_NO_RESPONSE;
- sei();
- return TRANSACTION_NO_RESPONSE;
- }
-
-# else
- // send transaction table index
- int tid = (sstd_index << 3) | (7 & nibble_bits_count(sstd_index));
- sync_send();
- _delay_sub_us(TID_SEND_ADJUST);
- serial_write_chunk(tid, 7);
- serial_delay_half1();
-
- // wait for the target response (step1 low->high)
- serial_input_with_pullup();
- while (!serial_read_pin()) {
- _delay_sub_us(2);
- }
-
- // check if the target is present (step2 high->low)
- for (int i = 0; serial_read_pin(); i++) {
- if (i > SLAVE_INT_ACK_WIDTH + 1) {
- // slave failed to pull the line low, assume not present
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_NO_RESPONSE;
- sei();
- return TRANSACTION_NO_RESPONSE;
- }
- _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT);
- }
-# endif
-
- // initiator recive phase
- // if the target is present syncronize with it
- if (trans->target2initiator_buffer_size > 0) {
- if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer, trans->target2initiator_buffer_size)) {
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_DATA_ERROR;
- sei();
- return TRANSACTION_DATA_ERROR;
- }
- }
-
- // initiator switch to output
- change_reciver2sender();
-
- // initiator send phase
- if (trans->initiator2target_buffer_size > 0) {
- serial_send_packet((uint8_t *)trans->initiator2target_buffer, trans->initiator2target_buffer_size);
- }
-
- // always, release the line when not in use
- sync_send();
-
- *trans->status = TRANSACTION_END;
- sei();
- return TRANSACTION_END;
-}
-
-# ifdef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_get_and_clean_status(int sstd_index) {
- SSTD_t *trans = &Transaction_table[sstd_index];
- cli();
- int retval = *trans->status;
- *trans->status = 0;
- ;
- sei();
- return retval;
-}
-# endif
-
-#endif
-
-// Helix serial.c history
-// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc)
-// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff)
-// (adjusted with avr-gcc 7.3.0)
-// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66)
-// (adjusted with avr-gcc 5.4.0, 7.3.0)
-// 2018-12-17 copy to TOP/quantum/split_common/ and remove backward compatibility code (#4669)
diff --git a/quantum/split_common/serial.h b/quantum/split_common/serial.h
deleted file mode 100644
index 53e66cf905..0000000000
--- a/quantum/split_common/serial.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-
-// /////////////////////////////////////////////////////////////////
-// Need Soft Serial defines in config.h
-// /////////////////////////////////////////////////////////////////
-// ex.
-// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6
-// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5
-// // 1: about 137kbps (default)
-// // 2: about 75kbps
-// // 3: about 39kbps
-// // 4: about 26kbps
-// // 5: about 20kbps
-//
-// //// USE simple API (using signle-type transaction function)
-// /* nothing */
-// //// USE flexible API (using multi-type transaction function)
-// #define SERIAL_USE_MULTI_TRANSACTION
-//
-// /////////////////////////////////////////////////////////////////
-
-// Soft Serial Transaction Descriptor
-typedef struct _SSTD_t {
- uint8_t *status;
- uint8_t initiator2target_buffer_size;
- uint8_t *initiator2target_buffer;
- uint8_t target2initiator_buffer_size;
- uint8_t *target2initiator_buffer;
-} SSTD_t;
-#define TID_LIMIT(table) (sizeof(table) / sizeof(SSTD_t))
-
-// initiator is transaction start side
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size);
-// target is interrupt accept side
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size);
-
-// initiator resullt
-#define TRANSACTION_END 0
-#define TRANSACTION_NO_RESPONSE 0x1
-#define TRANSACTION_DATA_ERROR 0x2
-#define TRANSACTION_TYPE_ERROR 0x4
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_transaction(void);
-#else
-int soft_serial_transaction(int sstd_index);
-#endif
-
-// target status
-// *SSTD_t.status has
-// initiator:
-// TRANSACTION_END
-// or TRANSACTION_NO_RESPONSE
-// or TRANSACTION_DATA_ERROR
-// target:
-// TRANSACTION_DATA_ERROR
-// or TRANSACTION_ACCEPTED
-#define TRANSACTION_ACCEPTED 0x8
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_get_and_clean_status(int sstd_index);
-#endif