diff options
Diffstat (limited to 'protocol/vusb/usbdrv/Changelog.txt')
| -rw-r--r-- | protocol/vusb/usbdrv/Changelog.txt | 308 |
1 files changed, 308 insertions, 0 deletions
diff --git a/protocol/vusb/usbdrv/Changelog.txt b/protocol/vusb/usbdrv/Changelog.txt new file mode 100644 index 0000000000..5c6354ab1e --- /dev/null +++ b/protocol/vusb/usbdrv/Changelog.txt @@ -0,0 +1,308 @@ +This file documents changes in the firmware-only USB driver for atmel's AVR +microcontrollers. New entries are always appended to the end of the file. +Scroll down to the bottom to see the most recent changes. + +2005-04-01: + - Implemented endpoint 1 as interrupt-in endpoint. + - Moved all configuration options to usbconfig.h which is not part of the + driver. + - Changed interface for usbVendorSetup(). + - Fixed compatibility with ATMega8 device. + - Various minor optimizations. + +2005-04-11: + - Changed interface to application: Use usbFunctionSetup(), usbFunctionRead() + and usbFunctionWrite() now. Added configuration options to choose which + of these functions to compile in. + - Assembler module delivers receive data non-inverted now. + - Made register and bit names compatible with more AVR devices. + +2005-05-03: + - Allow address of usbRxBuf on any memory page as long as the buffer does + not cross 256 byte page boundaries. + - Better device compatibility: works with Mega88 now. + - Code optimization in debugging module. + - Documentation updates. + +2006-01-02: + - Added (free) default Vendor- and Product-IDs bought from voti.nl. + - Added USBID-License.txt file which defines the rules for using the free + shared VID/PID pair. + - Added Readme.txt to the usbdrv directory which clarifies administrative + issues. + +2006-01-25: + - Added "configured state" to become more standards compliant. + - Added "HALT" state for interrupt endpoint. + - Driver passes the "USB Command Verifier" test from usb.org now. + - Made "serial number" a configuration option. + - Minor optimizations, we now recommend compiler option "-Os" for best + results. + - Added a version number to usbdrv.h + +2006-02-03: + - New configuration variable USB_BUFFER_SECTION for the memory section where + the USB rx buffer will go. This defaults to ".bss" if not defined. Since + this buffer MUST NOT cross 256 byte pages (not even touch a page at the + end), the user may want to pass a linker option similar to + "-Wl,--section-start=.mybuffer=0x800060". + - Provide structure for usbRequest_t. + - New defines for USB constants. + - Prepared for HID implementations. + - Increased data size limit for interrupt transfers to 8 bytes. + - New macro usbInterruptIsReady() to query interrupt buffer state. + +2006-02-18: + - Ensure that the data token which is sent as an ack to an OUT transfer is + always zero sized. This fixes a bug where the host reports an error after + sending an out transfer to the device, although all data arrived at the + device. + - Updated docs in usbdrv.h to reflect changed API in usbFunctionWrite(). + +* Release 2006-02-20 + + - Give a compiler warning when compiling with debugging turned on. + - Added Oleg Semyonov's changes for IAR-cc compatibility. + - Added new (optional) functions usbDeviceConnect() and usbDeviceDisconnect() + (also thanks to Oleg!). + - Rearranged tests in usbPoll() to save a couple of instructions in the most + likely case that no actions are pending. + - We need a delay between the SET ADDRESS request until the new address + becomes active. This delay was handled in usbPoll() until now. Since the + spec says that the delay must not exceed 2ms, previous versions required + aggressive polling during the enumeration phase. We have now moved the + handling of the delay into the interrupt routine. + - We must not reply with NAK to a SETUP transaction. We can only achieve this + by making sure that the rx buffer is empty when SETUP tokens are expected. + We therefore don't pass zero sized data packets from the status phase of + a transfer to usbPoll(). This change MAY cause troubles if you rely on + receiving a less than 8 bytes long packet in usbFunctionWrite() to + identify the end of a transfer. usbFunctionWrite() will NEVER be called + with a zero length. + +* Release 2006-03-14 + + - Improved IAR C support: tiny memory model, more devices + - Added template usbconfig.h file under the name usbconfig-prototype.h + +* Release 2006-03-26 + + - Added provision for one more interrupt-in endpoint (endpoint 3). + - Added provision for one interrupt-out endpoint (endpoint 1). + - Added flowcontrol macros for USB. + - Added provision for custom configuration descriptor. + - Allow ANY two port bits for D+ and D-. + - Merged (optional) receive endpoint number into global usbRxToken variable. + - Use USB_CFG_IOPORTNAME instead of USB_CFG_IOPORT. We now construct the + variable name from the single port letter instead of computing the address + of related ports from the output-port address. + +* Release 2006-06-26 + + - Updated documentation in usbdrv.h and usbconfig-prototype.h to reflect the + new features. + - Removed "#warning" directives because IAR does not understand them. Use + unused static variables instead to generate a warning. + - Do not include <avr/io.h> when compiling with IAR. + - Introduced USB_CFG_DESCR_PROPS_* in usbconfig.h to configure how each + USB descriptor should be handled. It is now possible to provide descriptor + data in Flash, RAM or dynamically at runtime. + - STALL is now a status in usbTxLen* instead of a message. We can now conform + to the spec and leave the stall status pending until it is cleared. + - Made usbTxPacketCnt1 and usbTxPacketCnt3 public. This allows the + application code to reset data toggling on interrupt pipes. + +* Release 2006-07-18 + + - Added an #if !defined __ASSEMBLER__ to the warning in usbdrv.h. This fixes + an assembler error. + - usbDeviceDisconnect() takes pull-up resistor to high impedance now. + +* Release 2007-02-01 + + - Merged in some code size improvements from usbtiny (thanks to Dick + Streefland for these optimizations!) + - Special alignment requirement for usbRxBuf not required any more. Thanks + again to Dick Streefland for this hint! + - Reverted to "#warning" instead of unused static variables -- new versions + of IAR CC should handle this directive. + - Changed Open Source license to GNU GPL v2 in order to make linking against + other free libraries easier. We no longer require publication of the + circuit diagrams, but we STRONGLY encourage it. If you improve the driver + itself, PLEASE grant us a royalty free license to your changes for our + commercial license. + +* Release 2007-03-29 + + - New configuration option "USB_PUBLIC" in usbconfig.h. + - Set USB version number to 1.10 instead of 1.01. + - Code used USB_CFG_DESCR_PROPS_STRING_DEVICE and + USB_CFG_DESCR_PROPS_STRING_PRODUCT inconsistently. Changed all occurrences + to USB_CFG_DESCR_PROPS_STRING_PRODUCT. + - New assembler module for 16.5 MHz RC oscillator clock with PLL in receiver + code. + - New assembler module for 16 MHz crystal. + - usbdrvasm.S contains common code only, clock-specific parts have been moved + to usbdrvasm12.S, usbdrvasm16.S and usbdrvasm165.S respectively. + +* Release 2007-06-25 + + - 16 MHz module: Do SE0 check in stuffed bits as well. + +* Release 2007-07-07 + + - Define hi8(x) for IAR compiler to limit result to 8 bits. This is necessary + for negative values. + - Added 15 MHz module contributed by V. Bosch. + - Interrupt vector name can now be configured. This is useful if somebody + wants to use a different hardware interrupt than INT0. + +* Release 2007-08-07 + + - Moved handleIn3 routine in usbdrvasm16.S so that relative jump range is + not exceeded. + - More config options: USB_RX_USER_HOOK(), USB_INITIAL_DATATOKEN, + USB_COUNT_SOF + - USB_INTR_PENDING can now be a memory address, not just I/O + +* Release 2007-09-19 + + - Split out common parts of assembler modules into separate include file + - Made endpoint numbers configurable so that given interface definitions + can be matched. See USB_CFG_EP3_NUMBER in usbconfig-prototype.h. + - Store endpoint number for interrupt/bulk-out so that usbFunctionWriteOut() + can handle any number of endpoints. + - Define usbDeviceConnect() and usbDeviceDisconnect() even if no + USB_CFG_PULLUP_IOPORTNAME is defined. Directly set D+ and D- to 0 in this + case. + +* Release 2007-12-01 + + - Optimize usbDeviceConnect() and usbDeviceDisconnect() for less code size + when USB_CFG_PULLUP_IOPORTNAME is not defined. + +* Release 2007-12-13 + + - Renamed all include-only assembler modules from *.S to *.inc so that + people don't add them to their project sources. + - Distribute leap bits in tx loop more evenly for 16 MHz module. + - Use "macro" and "endm" instead of ".macro" and ".endm" for IAR + - Avoid compiler warnings for constant expr range by casting some values in + USB descriptors. + +* Release 2008-01-21 + + - Fixed bug in 15 and 16 MHz module where the new address set with + SET_ADDRESS was already accepted at the next NAK or ACK we send, not at + the next data packet we send. This caused problems when the host polled + too fast. Thanks to Alexander Neumann for his help and patience debugging + this issue! + +* Release 2008-02-05 + + - Fixed bug in 16.5 MHz module where a register was used in the interrupt + handler before it was pushed. This bug was introduced with version + 2007-09-19 when common parts were moved to a separate file. + - Optimized CRC routine (thanks to Reimar Doeffinger). + +* Release 2008-02-16 + + - Removed outdated IAR compatibility stuff (code sections). + - Added hook macros for USB_RESET_HOOK() and USB_SET_ADDRESS_HOOK(). + - Added optional routine usbMeasureFrameLength() for calibration of the + internal RC oscillator. + +* Release 2008-02-28 + + - USB_INITIAL_DATATOKEN defaults to USBPID_DATA1 now, which means that we + start with sending USBPID_DATA0. + - Changed defaults in usbconfig-prototype.h + - Added free USB VID/PID pair for MIDI class devices + - Restructured AVR-USB as separate package, not part of PowerSwitch any more. + +* Release 2008-04-18 + + - Restructured usbdrv.c so that it is easier to read and understand. + - Better code optimization with gcc 4. + - If a second interrupt in endpoint is enabled, also add it to config + descriptor. + - Added config option for long transfers (above 254 bytes), see + USB_CFG_LONG_TRANSFERS in usbconfig.h. + - Added 20 MHz module contributed by Jeroen Benschop. + +* Release 2008-05-13 + + - Fixed bug in libs-host/hiddata.c function usbhidGetReport(): length + was not incremented, pointer to length was incremented instead. + - Added code to command line tool(s) which claims an interface. This code + is disabled by default, but may be necessary on newer Linux kernels. + - Added usbconfig.h option "USB_CFG_CHECK_DATA_TOGGLING". + - New header "usbportability.h" prepares ports to other development + environments. + - Long transfers (above 254 bytes) did not work when usbFunctionRead() was + used to supply the data. Fixed this bug. [Thanks to Alexander Neumann!] + - In hiddata.c (example code for sending/receiving data over HID), use + USB_RECIP_DEVICE instead of USB_RECIP_INTERFACE for control transfers so + that we need not claim the interface. + - in usbPoll() loop 20 times polling for RESET state instead of 10 times. + This accounts for the higher clock rates we now support. + - Added a module for 12.8 MHz RC oscillator with PLL in receiver loop. + - Added hook to SOF code so that oscillator can be tuned to USB frame clock. + - Added timeout to waitForJ loop. Helps preventing unexpected hangs. + - Added example code for oscillator tuning to libs-device (thanks to + Henrik Haftmann for the idea to this routine). + - Implemented option USB_CFG_SUPPRESS_INTR_CODE. + +* Release 2008-10-22 + + - Fixed libs-device/osctune.h: OSCCAL is memory address on ATMega88 and + similar, not offset of 0x20 needs to be added. + - Allow distribution under GPLv3 for those who have to link against other + code distributed under GPLv3. + +* Release 2008-11-26 + + - Removed libusb-win32 dependency for hid-data example in Makefile.windows. + It was never required and confused many people. + - Added extern uchar usbRxToken to usbdrv.h. + - Integrated a module with CRC checks at 18 MHz by Lukas Schrittwieser. + +* Release 2009-03-23 + + - Hid-mouse example used settings from hid-data example, fixed that. + - Renamed project to V-USB due to a trademark issue with Atmel(r). + - Changed CommercialLicense.txt and USBID-License.txt to make the + background of USB ID registration clearer. + +* Release 2009-04-15 + + - Changed CommercialLicense.txt to reflect the new range of PIDs from + Jason Kotzin. + - Removed USBID-License.txt in favor of USB-IDs-for-free.txt and + USB-ID-FAQ.txt + - Fixed a bug in the 12.8 MHz module: End Of Packet decection was made in + the center between bit 0 and 1 of each byte. This is where the data lines + are expected to change and the sampled data may therefore be nonsense. + We therefore check EOP ONLY if bits 0 AND 1 have both been read as 0 on D-. + - Fixed a bitstuffing problem in the 16 MHz module: If bit 6 was stuffed, + the unstuffing code in the receiver routine was 1 cycle too long. If + multiple bytes had the unstuffing in bit 6, the error summed up until the + receiver was out of sync. + - Included option for faster CRC routine. + Thanks to Slawomir Fras (BoskiDialer) for this code! + - Updated bits in Configuration Descriptor's bmAttributes according to + USB 1.1 (in particular bit 7, it is a must-be-set bit now). + +* Release 2009-08-22 + + - Moved first DBG1() after odDebugInit() in all examples. + - Use vector INT0_vect instead of SIG_INTERRUPT0 if defined. This makes + V-USB compatible with the new "p" suffix devices (e.g. ATMega328p). + - USB_CFG_CLOCK_KHZ setting is now required in usbconfig.h (no default any + more). + - New option USB_CFG_DRIVER_FLASH_PAGE allows boot loaders on devices with + more than 64 kB flash. + - Built-in configuration descriptor allows custom definition for second + endpoint now. + +* Release 2010-07-15 |