diff options
Diffstat (limited to 'platforms')
46 files changed, 1425 insertions, 1398 deletions
diff --git a/platforms/arm_atsam/pin_defs.h b/platforms/arm_atsam/_pin_defs.h index 5b50b23910..5b50b23910 100644 --- a/platforms/arm_atsam/pin_defs.h +++ b/platforms/arm_atsam/_pin_defs.h diff --git a/platforms/avr/pin_defs.h b/platforms/avr/_pin_defs.h index 3889704a87..3889704a87 100644 --- a/platforms/avr/pin_defs.h +++ b/platforms/avr/_pin_defs.h diff --git a/platforms/avr/drivers/hd44780.c b/platforms/avr/drivers/hd44780.c deleted file mode 100644 index f15d7d0da8..0000000000 --- a/platforms/avr/drivers/hd44780.c +++ /dev/null @@ -1,542 +0,0 @@ -/**************************************************************************** - Title: HD44780U LCD library - Author: Peter Fleury <pfleury@gmx.ch> http://tinyurl.com/peterfleury - License: GNU General Public License Version 3 - File: $Id: lcd.c,v 1.15.2.2 2015/01/17 12:16:05 peter Exp $ - Software: AVR-GCC 3.3 - Target: any AVR device, memory mapped mode only for AT90S4414/8515/Mega - - DESCRIPTION - Basic routines for interfacing a HD44780U-based text lcd display - - Originally based on Volker Oth's lcd library, - changed lcd_init(), added additional constants for lcd_command(), - added 4-bit I/O mode, improved and optimized code. - - Library can be operated in memory mapped mode (LCD_IO_MODE=0) or in - 4-bit IO port mode (LCD_IO_MODE=1). 8-bit IO port mode not supported. - - Memory mapped mode compatible with Kanda STK200, but supports also - generation of R/W signal through A8 address line. - - USAGE - See the C include lcd.h file for a description of each function - -*****************************************************************************/ -#include <inttypes.h> -#include <avr/io.h> -#include <avr/pgmspace.h> -#include <util/delay.h> -#include "hd44780.h" - -/* -** constants/macros -*/ -#define DDR(x) (*(&x - 1)) /* address of data direction register of port x */ -#if defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) -/* on ATmega64/128 PINF is on port 0x00 and not 0x60 */ -# define PIN(x) (&PORTF == &(x) ? _SFR_IO8(0x00) : (*(&x - 2))) -#else -# define PIN(x) (*(&x - 2)) /* address of input register of port x */ -#endif - -#if LCD_IO_MODE -# define lcd_e_delay() _delay_us(LCD_DELAY_ENABLE_PULSE) -# define lcd_e_high() LCD_E_PORT |= _BV(LCD_E_PIN); -# define lcd_e_low() LCD_E_PORT &= ~_BV(LCD_E_PIN); -# define lcd_e_toggle() toggle_e() -# define lcd_rw_high() LCD_RW_PORT |= _BV(LCD_RW_PIN) -# define lcd_rw_low() LCD_RW_PORT &= ~_BV(LCD_RW_PIN) -# define lcd_rs_high() LCD_RS_PORT |= _BV(LCD_RS_PIN) -# define lcd_rs_low() LCD_RS_PORT &= ~_BV(LCD_RS_PIN) -#endif - -#if LCD_IO_MODE -# if LCD_LINES == 1 -# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_1LINE -# else -# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_2LINES -# endif -#else -# if LCD_LINES == 1 -# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_1LINE -# else -# define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_2LINES -# endif -#endif - -#if LCD_CONTROLLER_KS0073 -# if LCD_LINES == 4 - -# define KS0073_EXTENDED_FUNCTION_REGISTER_ON 0x2C /* |0|010|1100 4-bit mode, extension-bit RE = 1 */ -# define KS0073_EXTENDED_FUNCTION_REGISTER_OFF 0x28 /* |0|010|1000 4-bit mode, extension-bit RE = 0 */ -# define KS0073_4LINES_MODE 0x09 /* |0|000|1001 4 lines mode */ - -# endif -#endif - -/* -** function prototypes -*/ -#if LCD_IO_MODE -static void toggle_e(void); -#endif - -/* -** local functions -*/ - -/************************************************************************* -delay for a minimum of <us> microseconds -the number of loops is calculated at compile-time from MCU clock frequency -*************************************************************************/ -#define delay(us) _delay_us(us) - -#if LCD_IO_MODE -/* toggle Enable Pin to initiate write */ -static void toggle_e(void) { - lcd_e_high(); - lcd_e_delay(); - lcd_e_low(); -} -#endif - -/************************************************************************* -Low-level function to write byte to LCD controller -Input: data byte to write to LCD - rs 1: write data - 0: write instruction -Returns: none -*************************************************************************/ -#if LCD_IO_MODE -static void lcd_write(uint8_t data, uint8_t rs) { - unsigned char dataBits; - - if (rs) { /* write data (RS=1, RW=0) */ - lcd_rs_high(); - } else { /* write instruction (RS=0, RW=0) */ - lcd_rs_low(); - } - lcd_rw_low(); /* RW=0 write mode */ - - if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) { - /* configure data pins as output */ - DDR(LCD_DATA0_PORT) |= 0x0F; - - /* output high nibble first */ - dataBits = LCD_DATA0_PORT & 0xF0; - LCD_DATA0_PORT = dataBits | ((data >> 4) & 0x0F); - lcd_e_toggle(); - - /* output low nibble */ - LCD_DATA0_PORT = dataBits | (data & 0x0F); - lcd_e_toggle(); - - /* all data pins high (inactive) */ - LCD_DATA0_PORT = dataBits | 0x0F; - } else { - /* configure data pins as output */ - DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN); - DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN); - DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN); - DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN); - - /* output high nibble first */ - LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN); - LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN); - LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN); - LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); - if (data & 0x80) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN); - if (data & 0x40) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN); - if (data & 0x20) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); - if (data & 0x10) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); - lcd_e_toggle(); - - /* output low nibble */ - LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN); - LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN); - LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN); - LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); - if (data & 0x08) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN); - if (data & 0x04) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN); - if (data & 0x02) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); - if (data & 0x01) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); - lcd_e_toggle(); - - /* all data pins high (inactive) */ - LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); - LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); - LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN); - LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN); - } -} -#else -# define lcd_write(d, rs) \ - if (rs) \ - *(volatile uint8_t *)(LCD_IO_DATA) = d; \ - else \ - *(volatile uint8_t *)(LCD_IO_FUNCTION) = d; -/* rs==0 -> write instruction to LCD_IO_FUNCTION */ -/* rs==1 -> write data to LCD_IO_DATA */ -#endif - -/************************************************************************* -Low-level function to read byte from LCD controller -Input: rs 1: read data - 0: read busy flag / address counter -Returns: byte read from LCD controller -*************************************************************************/ -#if LCD_IO_MODE -static uint8_t lcd_read(uint8_t rs) { - uint8_t data; - - if (rs) - lcd_rs_high(); /* RS=1: read data */ - else - lcd_rs_low(); /* RS=0: read busy flag */ - lcd_rw_high(); /* RW=1 read mode */ - - if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) { - DDR(LCD_DATA0_PORT) &= 0xF0; /* configure data pins as input */ - - lcd_e_high(); - lcd_e_delay(); - data = PIN(LCD_DATA0_PORT) << 4; /* read high nibble first */ - lcd_e_low(); - - lcd_e_delay(); /* Enable 500ns low */ - - lcd_e_high(); - lcd_e_delay(); - data |= PIN(LCD_DATA0_PORT) & 0x0F; /* read low nibble */ - lcd_e_low(); - } else { - /* configure data pins as input */ - DDR(LCD_DATA0_PORT) &= ~_BV(LCD_DATA0_PIN); - DDR(LCD_DATA1_PORT) &= ~_BV(LCD_DATA1_PIN); - DDR(LCD_DATA2_PORT) &= ~_BV(LCD_DATA2_PIN); - DDR(LCD_DATA3_PORT) &= ~_BV(LCD_DATA3_PIN); - - /* read high nibble first */ - lcd_e_high(); - lcd_e_delay(); - data = 0; - if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x10; - if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x20; - if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x40; - if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x80; - lcd_e_low(); - - lcd_e_delay(); /* Enable 500ns low */ - - /* read low nibble */ - lcd_e_high(); - lcd_e_delay(); - if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x01; - if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x02; - if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x04; - if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x08; - lcd_e_low(); - } - return data; -} -#else -# define lcd_read(rs) (rs) ? *(volatile uint8_t *)(LCD_IO_DATA + LCD_IO_READ) : *(volatile uint8_t *)(LCD_IO_FUNCTION + LCD_IO_READ) -/* rs==0 -> read instruction from LCD_IO_FUNCTION */ -/* rs==1 -> read data from LCD_IO_DATA */ -#endif - -/************************************************************************* -loops while lcd is busy, returns address counter -*************************************************************************/ -static uint8_t lcd_waitbusy(void) - -{ - register uint8_t c; - - /* wait until busy flag is cleared */ - while ((c = lcd_read(0)) & (1 << LCD_BUSY)) { - } - - /* the address counter is updated 4us after the busy flag is cleared */ - delay(LCD_DELAY_BUSY_FLAG); - - /* now read the address counter */ - return (lcd_read(0)); // return address counter - -} /* lcd_waitbusy */ - -/************************************************************************* -Move cursor to the start of next line or to the first line if the cursor -is already on the last line. -*************************************************************************/ -static inline void lcd_newline(uint8_t pos) { - register uint8_t addressCounter; - -#if LCD_LINES == 1 - addressCounter = 0; -#endif -#if LCD_LINES == 2 - if (pos < (LCD_START_LINE2)) - addressCounter = LCD_START_LINE2; - else - addressCounter = LCD_START_LINE1; -#endif -#if LCD_LINES == 4 -# if KS0073_4LINES_MODE - if (pos < LCD_START_LINE2) - addressCounter = LCD_START_LINE2; - else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE3)) - addressCounter = LCD_START_LINE3; - else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE4)) - addressCounter = LCD_START_LINE4; - else - addressCounter = LCD_START_LINE1; -# else - if (pos < LCD_START_LINE3) - addressCounter = LCD_START_LINE2; - else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE4)) - addressCounter = LCD_START_LINE3; - else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE2)) - addressCounter = LCD_START_LINE4; - else - addressCounter = LCD_START_LINE1; -# endif -#endif - lcd_command((1 << LCD_DDRAM) + addressCounter); - -} /* lcd_newline */ - -/* -** PUBLIC FUNCTIONS -*/ - -/************************************************************************* -Send LCD controller instruction command -Input: instruction to send to LCD controller, see HD44780 data sheet -Returns: none -*************************************************************************/ -void lcd_command(uint8_t cmd) { - lcd_waitbusy(); - lcd_write(cmd, 0); -} - -/************************************************************************* -Send data byte to LCD controller -Input: data to send to LCD controller, see HD44780 data sheet -Returns: none -*************************************************************************/ -void lcd_data(uint8_t data) { - lcd_waitbusy(); - lcd_write(data, 1); -} - -/************************************************************************* -Set cursor to specified position -Input: x horizontal position (0: left most position) - y vertical position (0: first line) -Returns: none -*************************************************************************/ -void lcd_gotoxy(uint8_t x, uint8_t y) { -#if LCD_LINES == 1 - lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x); -#endif -#if LCD_LINES == 2 - if (y == 0) - lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x); - else - lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x); -#endif -#if LCD_LINES == 4 - if (y == 0) - lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x); - else if (y == 1) - lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x); - else if (y == 2) - lcd_command((1 << LCD_DDRAM) + LCD_START_LINE3 + x); - else /* y==3 */ - lcd_command((1 << LCD_DDRAM) + LCD_START_LINE4 + x); -#endif - -} /* lcd_gotoxy */ - -/************************************************************************* -*************************************************************************/ -int lcd_getxy(void) { - return lcd_waitbusy(); -} - -/************************************************************************* -Clear display and set cursor to home position -*************************************************************************/ -void lcd_clrscr(void) { - lcd_command(1 << LCD_CLR); -} - -/************************************************************************* -Set cursor to home position -*************************************************************************/ -void lcd_home(void) { - lcd_command(1 << LCD_HOME); -} - -/************************************************************************* -Display character at current cursor position -Input: character to be displayed -Returns: none -*************************************************************************/ -void lcd_putc(char c) { - uint8_t pos; - - pos = lcd_waitbusy(); // read busy-flag and address counter - if (c == '\n') { - lcd_newline(pos); - } else { -#if LCD_WRAP_LINES == 1 -# if LCD_LINES == 1 - if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) { - lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0); - } -# elif LCD_LINES == 2 - if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) { - lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0); - } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) { - lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0); - } -# elif LCD_LINES == 4 - if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) { - lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0); - } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) { - lcd_write((1 << LCD_DDRAM) + LCD_START_LINE3, 0); - } else if (pos == LCD_START_LINE3 + LCD_DISP_LENGTH) { - lcd_write((1 << LCD_DDRAM) + LCD_START_LINE4, 0); - } else if (pos == LCD_START_LINE4 + LCD_DISP_LENGTH) { - lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0); - } -# endif - lcd_waitbusy(); -#endif - lcd_write(c, 1); - } - -} /* lcd_putc */ - -/************************************************************************* -Display string without auto linefeed -Input: string to be displayed -Returns: none -*************************************************************************/ -void lcd_puts(const char *s) -/* print string on lcd (no auto linefeed) */ -{ - register char c; - - while ((c = *s++)) { - lcd_putc(c); - } - -} /* lcd_puts */ - -/************************************************************************* -Display string from program memory without auto linefeed -Input: string from program memory be be displayed -Returns: none -*************************************************************************/ -void lcd_puts_p(const char *progmem_s) -/* print string from program memory on lcd (no auto linefeed) */ -{ - register char c; - - while ((c = pgm_read_byte(progmem_s++))) { - lcd_putc(c); - } - -} /* lcd_puts_p */ - -/************************************************************************* -Initialize display and select type of cursor -Input: dispAttr LCD_DISP_OFF display off - LCD_DISP_ON display on, cursor off - LCD_DISP_ON_CURSOR display on, cursor on - LCD_DISP_CURSOR_BLINK display on, cursor on flashing -Returns: none -*************************************************************************/ -void lcd_init(uint8_t dispAttr) { -#if LCD_IO_MODE - /* - * Initialize LCD to 4 bit I/O mode - */ - - if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (&LCD_RS_PORT == &LCD_DATA0_PORT) && (&LCD_RW_PORT == &LCD_DATA0_PORT) && (&LCD_E_PORT == &LCD_DATA0_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) && (LCD_RS_PIN == 4) && (LCD_RW_PIN == 5) && (LCD_E_PIN == 6)) { - /* configure all port bits as output (all LCD lines on same port) */ - DDR(LCD_DATA0_PORT) |= 0x7F; - } else if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) { - /* configure all port bits as output (all LCD data lines on same port, but control lines on different ports) */ - DDR(LCD_DATA0_PORT) |= 0x0F; - DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN); - DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN); - DDR(LCD_E_PORT) |= _BV(LCD_E_PIN); - } else { - /* configure all port bits as output (LCD data and control lines on different ports */ - DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN); - DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN); - DDR(LCD_E_PORT) |= _BV(LCD_E_PIN); - DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN); - DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN); - DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN); - DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN); - } - delay(LCD_DELAY_BOOTUP); /* wait 16ms or more after power-on */ - - /* initial write to lcd is 8bit */ - LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN); // LCD_FUNCTION>>4; - LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN); // LCD_FUNCTION_8BIT>>4; - lcd_e_toggle(); - delay(LCD_DELAY_INIT); /* delay, busy flag can't be checked here */ - - /* repeat last command */ - lcd_e_toggle(); - delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */ - - /* repeat last command a third time */ - lcd_e_toggle(); - delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */ - - /* now configure for 4bit mode */ - LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN); // LCD_FUNCTION_4BIT_1LINE>>4 - lcd_e_toggle(); - delay(LCD_DELAY_INIT_4BIT); /* some displays need this additional delay */ - - /* from now the LCD only accepts 4 bit I/O, we can use lcd_command() */ -#else - /* - * Initialize LCD to 8 bit memory mapped mode - */ - - /* enable external SRAM (memory mapped lcd) and one wait state */ - MCUCR = _BV(SRE) | _BV(SRW); - - /* reset LCD */ - delay(LCD_DELAY_BOOTUP); /* wait 16ms after power-on */ - lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */ - delay(LCD_DELAY_INIT); /* wait 5ms */ - lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */ - delay(LCD_DELAY_INIT_REP); /* wait 64us */ - lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */ - delay(LCD_DELAY_INIT_REP); /* wait 64us */ -#endif - -#if KS0073_4LINES_MODE - /* Display with KS0073 controller requires special commands for enabling 4 line mode */ - lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_ON); - lcd_command(KS0073_4LINES_MODE); - lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_OFF); -#else - lcd_command(LCD_FUNCTION_DEFAULT); /* function set: display lines */ -#endif - lcd_command(LCD_DISP_OFF); /* display off */ - lcd_clrscr(); /* display clear */ - lcd_command(LCD_MODE_DEFAULT); /* set entry mode */ - lcd_command(dispAttr); /* display/cursor control */ - -} /* lcd_init */ diff --git a/platforms/avr/drivers/hd44780.h b/platforms/avr/drivers/hd44780.h deleted file mode 100644 index 08e60f8a44..0000000000 --- a/platforms/avr/drivers/hd44780.h +++ /dev/null @@ -1,348 +0,0 @@ -/************************************************************************* - Title : C include file for the HD44780U LCD library (lcd.c) - Author: Peter Fleury <pfleury@gmx.ch> http://tinyurl.com/peterfleury - License: GNU General Public License Version 3 - File: $Id: lcd.h,v 1.14.2.4 2015/01/20 17:16:07 peter Exp $ - Software: AVR-GCC 4.x - Hardware: any AVR device, memory mapped mode only for AVR with - memory mapped interface (AT90S8515/ATmega8515/ATmega128) -***************************************************************************/ - -/** - @mainpage - Collection of libraries for AVR-GCC - @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury - @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3 - - @file - @defgroup pfleury_lcd LCD library <lcd.h> - @code #include <lcd.h> @endcode - - @brief Basic routines for interfacing a HD44780U-based character LCD display - - LCD character displays can be found in many devices, like espresso machines, laser printers. - The Hitachi HD44780 controller and its compatible controllers like Samsung KS0066U have become an industry standard for these types of displays. - - This library allows easy interfacing with a HD44780 compatible display and can be - operated in memory mapped mode (LCD_IO_MODE defined as 0 in the include file lcd.h.) or in - 4-bit IO port mode (LCD_IO_MODE defined as 1). 8-bit IO port mode is not supported. - - Memory mapped mode is compatible with old Kanda STK200 starter kit, but also supports - generation of R/W signal through A8 address line. - - @see The chapter <a href=" http://homepage.hispeed.ch/peterfleury/avr-lcd44780.html" target="_blank">Interfacing a HD44780 Based LCD to an AVR</a> - on my home page, which shows example circuits how to connect an LCD to an AVR controller. - - @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury - - @version 2.0 - - @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3 - -*/ - -#pragma once - -#include <inttypes.h> -#include <avr/pgmspace.h> - -#if (__GNUC__ * 100 + __GNUC_MINOR__) < 405 -# error "This library requires AVR-GCC 4.5 or later, update to newer AVR-GCC compiler !" -#endif - -/**@{*/ - -/* - * LCD and target specific definitions below can be defined in a separate include file with name lcd_definitions.h instead modifying this file - * by adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile - * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h - */ -#ifdef _LCD_DEFINITIONS_FILE -# include "lcd_definitions.h" -#endif - -/** - * @name Definition for LCD controller type - * Use 0 for HD44780 controller, change to 1 for displays with KS0073 controller. - */ -#ifndef LCD_CONTROLLER_KS0073 -# define LCD_CONTROLLER_KS0073 0 /**< Use 0 for HD44780 controller, 1 for KS0073 controller */ -#endif - -/** - * @name Definitions for Display Size - * Change these definitions to adapt setting to your display - * - * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by - * adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile. - * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h - * - */ -#ifndef LCD_LINES -# define LCD_LINES 2 /**< number of visible lines of the display */ -#endif -#ifndef LCD_DISP_LENGTH -# define LCD_DISP_LENGTH 16 /**< visibles characters per line of the display */ -#endif -#ifndef LCD_LINE_LENGTH -# define LCD_LINE_LENGTH 0x40 /**< internal line length of the display */ -#endif -#ifndef LCD_START_LINE1 -# define LCD_START_LINE1 0x00 /**< DDRAM address of first char of line 1 */ -#endif -#ifndef LCD_START_LINE2 -# define LCD_START_LINE2 0x40 /**< DDRAM address of first char of line 2 */ -#endif -#ifndef LCD_START_LINE3 -# define LCD_START_LINE3 0x14 /**< DDRAM address of first char of line 3 */ -#endif -#ifndef LCD_START_LINE4 -# define LCD_START_LINE4 0x54 /**< DDRAM address of first char of line 4 */ -#endif -#ifndef LCD_WRAP_LINES -# define LCD_WRAP_LINES 0 /**< 0: no wrap, 1: wrap at end of visibile line */ -#endif - -/** - * @name Definitions for 4-bit IO mode - * - * The four LCD data lines and the three control lines RS, RW, E can be on the - * same port or on different ports. - * Change LCD_RS_PORT, LCD_RW_PORT, LCD_E_PORT if you want the control lines on - * different ports. - * - * Normally the four data lines should be mapped to bit 0..3 on one port, but it - * is possible to connect these data lines in different order or even on different - * ports by adapting the LCD_DATAx_PORT and LCD_DATAx_PIN definitions. - * - * Adjust these definitions to your target.\n - * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by - * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile. - * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h - * - */ -#define LCD_IO_MODE 1 /**< 0: memory mapped mode, 1: IO port mode */ - -#if LCD_IO_MODE - -# ifndef LCD_PORT -# define LCD_PORT PORTA /**< port for the LCD lines */ -# endif -# ifndef LCD_DATA0_PORT -# define LCD_DATA0_PORT LCD_PORT /**< port for 4bit data bit 0 */ -# endif -# ifndef LCD_DATA1_PORT -# define LCD_DATA1_PORT LCD_PORT /**< port for 4bit data bit 1 */ -# endif -# ifndef LCD_DATA2_PORT -# define LCD_DATA2_PORT LCD_PORT /**< port for 4bit data bit 2 */ -# endif -# ifndef LCD_DATA3_PORT -# define LCD_DATA3_PORT LCD_PORT /**< port for 4bit data bit 3 */ -# endif -# ifndef LCD_DATA0_PIN -# define LCD_DATA0_PIN 4 /**< pin for 4bit data bit 0 */ -# endif -# ifndef LCD_DATA1_PIN -# define LCD_DATA1_PIN 5 /**< pin for 4bit data bit 1 */ -# endif -# ifndef LCD_DATA2_PIN -# define LCD_DATA2_PIN 6 /**< pin for 4bit data bit 2 */ -# endif -# ifndef LCD_DATA3_PIN -# define LCD_DATA3_PIN 7 /**< pin for 4bit data bit 3 */ -# endif -# ifndef LCD_RS_PORT -# define LCD_RS_PORT LCD_PORT /**< port for RS line */ -# endif -# ifndef LCD_RS_PIN -# define LCD_RS_PIN 3 /**< pin for RS line */ -# endif -# ifndef LCD_RW_PORT -# define LCD_RW_PORT LCD_PORT /**< port for RW line */ -# endif -# ifndef LCD_RW_PIN -# define LCD_RW_PIN 2 /**< pin for RW line */ -# endif -# ifndef LCD_E_PORT -# define LCD_E_PORT LCD_PORT /**< port for Enable line */ -# endif -# ifndef LCD_E_PIN -# define LCD_E_PIN 1 /**< pin for Enable line */ -# endif - -#elif defined(__AVR_AT90S4414__) || defined(__AVR_AT90S8515__) || defined(__AVR_ATmega64__) || defined(__AVR_ATmega8515__) || defined(__AVR_ATmega103__) || defined(__AVR_ATmega128__) || defined(__AVR_ATmega161__) || defined(__AVR_ATmega162__) -/* - * memory mapped mode is only supported when the device has an external data memory interface - */ -# define LCD_IO_DATA 0xC000 /* A15=E=1, A14=RS=1 */ -# define LCD_IO_FUNCTION 0x8000 /* A15=E=1, A14=RS=0 */ -# define LCD_IO_READ 0x0100 /* A8 =R/W=1 (R/W: 1=Read, 0=Write */ - -#else -# error "external data memory interface not available for this device, use 4-bit IO port mode" - -#endif - -/** - * @name Definitions of delays - * Used to calculate delay timers. - * Adapt the F_CPU define in the Makefile to the clock frequency in Hz of your target - * - * These delay times can be adjusted, if some displays require different delays.\n - * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by - * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile. - * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h - */ -#ifndef LCD_DELAY_BOOTUP -# define LCD_DELAY_BOOTUP 16000 /**< delay in micro seconds after power-on */ -#endif -#ifndef LCD_DELAY_INIT -# define LCD_DELAY_INIT 5000 /**< delay in micro seconds after initialization command sent */ -#endif -#ifndef LCD_DELAY_INIT_REP -# define LCD_DELAY_INIT_REP 64 /**< delay in micro seconds after initialization command repeated */ -#endif -#ifndef LCD_DELAY_INIT_4BIT -# define LCD_DELAY_INIT_4BIT 64 /**< delay in micro seconds after setting 4-bit mode */ -#endif -#ifndef LCD_DELAY_BUSY_FLAG -# define LCD_DELAY_BUSY_FLAG 4 /**< time in micro seconds the address counter is updated after busy flag is cleared */ -#endif -#ifndef LCD_DELAY_ENABLE_PULSE -# define LCD_DELAY_ENABLE_PULSE 1 /**< enable signal pulse width in micro seconds */ -#endif - -/** - * @name Definitions for LCD command instructions - * The constants define the various LCD controller instructions which can be passed to the - * function lcd_command(), see HD44780 data sheet for a complete description. - */ - -/* instruction register bit positions, see HD44780U data sheet */ -#define LCD_CLR 0 /* DB0: clear display */ -#define LCD_HOME 1 /* DB1: return to home position */ -#define LCD_ENTRY_MODE 2 /* DB2: set entry mode */ -#define LCD_ENTRY_INC 1 /* DB1: 1=increment, 0=decrement */ -#define LCD_ENTRY_SHIFT 0 /* DB2: 1=display shift on */ -#define LCD_ON 3 /* DB3: turn lcd/cursor on */ -#define LCD_ON_DISPLAY 2 /* DB2: turn display on */ -#define LCD_ON_CURSOR 1 /* DB1: turn cursor on */ -#define LCD_ON_BLINK 0 /* DB0: blinking cursor ? */ -#define LCD_MOVE 4 /* DB4: move cursor/display */ -#define LCD_MOVE_DISP 3 /* DB3: move display (0-> cursor) ? */ -#define LCD_MOVE_RIGHT 2 /* DB2: move right (0-> left) ? */ -#define LCD_FUNCTION 5 /* DB5: function set */ -#define LCD_FUNCTION_8BIT 4 /* DB4: set 8BIT mode (0->4BIT mode) */ -#define LCD_FUNCTION_2LINES 3 /* DB3: two lines (0->one line) */ -#define LCD_FUNCTION_10DOTS 2 /* DB2: 5x10 font (0->5x7 font) */ -#define LCD_CGRAM 6 /* DB6: set CG RAM address */ -#define LCD_DDRAM 7 /* DB7: set DD RAM address */ -#define LCD_BUSY 7 /* DB7: LCD is busy */ - -/* set entry mode: display shift on/off, dec/inc cursor move direction */ -#define LCD_ENTRY_DEC 0x04 /* display shift off, dec cursor move dir */ -#define LCD_ENTRY_DEC_SHIFT 0x05 /* display shift on, dec cursor move dir */ -#define LCD_ENTRY_INC_ 0x06 /* display shift off, inc cursor move dir */ -#define LCD_ENTRY_INC_SHIFT 0x07 /* display shift on, inc cursor move dir */ - -/* display on/off, cursor on/off, blinking char at cursor position */ -#define LCD_DISP_OFF 0x08 /* display off */ -#define LCD_DISP_ON 0x0C /* display on, cursor off */ -#define LCD_DISP_ON_BLINK 0x0D /* display on, cursor off, blink char */ -#define LCD_DISP_ON_CURSOR 0x0E /* display on, cursor on */ -#define LCD_DISP_ON_CURSOR_BLINK 0x0F /* display on, cursor on, blink char */ - -/* move cursor/shift display */ -#define LCD_MOVE_CURSOR_LEFT 0x10 /* move cursor left (decrement) */ -#define LCD_MOVE_CURSOR_RIGHT 0x14 /* move cursor right (increment) */ -#define LCD_MOVE_DISP_LEFT 0x18 /* shift display left */ -#define LCD_MOVE_DISP_RIGHT 0x1C /* shift display right */ - -/* function set: set interface data length and number of display lines */ -#define LCD_FUNCTION_4BIT_1LINE 0x20 /* 4-bit interface, single line, 5x7 dots */ -#define LCD_FUNCTION_4BIT_2LINES 0x28 /* 4-bit interface, dual line, 5x7 dots */ -#define LCD_FUNCTION_8BIT_1LINE 0x30 /* 8-bit interface, single line, 5x7 dots */ -#define LCD_FUNCTION_8BIT_2LINES 0x38 /* 8-bit interface, dual line, 5x7 dots */ - -#define LCD_MODE_DEFAULT ((1 << LCD_ENTRY_MODE) | (1 << LCD_ENTRY_INC)) - -/** - * @name Functions - */ - -/** - @brief Initialize display and select type of cursor - @param dispAttr \b LCD_DISP_OFF display off\n - \b LCD_DISP_ON display on, cursor off\n - \b LCD_DISP_ON_CURSOR display on, cursor on\n - \b LCD_DISP_ON_CURSOR_BLINK display on, cursor on flashing - @return none -*/ -extern void lcd_init(uint8_t dispAttr); - -/** - @brief Clear display and set cursor to home position - @return none -*/ -extern void lcd_clrscr(void); - -/** - @brief Set cursor to home position - @return none -*/ -extern void lcd_home(void); - -/** - @brief Set cursor to specified position - - @param x horizontal position\n (0: left most position) - @param y vertical position\n (0: first line) - @return none -*/ -extern void lcd_gotoxy(uint8_t x, uint8_t y); - -/** - @brief Display character at current cursor position - @param c character to be displayed - @return none -*/ -extern void lcd_putc(char c); - -/** - @brief Display string without auto linefeed - @param s string to be displayed - @return none -*/ -extern void lcd_puts(const char *s); - -/** - @brief Display string from program memory without auto linefeed - @param progmem_s string from program memory be be displayed - @return none - @see lcd_puts_P -*/ -extern void lcd_puts_p(const char *progmem_s); - -/** - @brief Send LCD controller instruction command - @param cmd instruction to send to LCD controller, see HD44780 data sheet - @return none -*/ -extern void lcd_command(uint8_t cmd); - -/** - @brief Send data byte to LCD controller - - Similar to lcd_putc(), but without interpreting LF - @param data byte to send to LCD controller, see HD44780 data sheet - @return none -*/ -extern void lcd_data(uint8_t data); - -/** - @brief macros for automatically storing string constant in program memory -*/ -#define lcd_puts_P(__s) lcd_puts_p(PSTR(__s)) - -/**@}*/ diff --git a/platforms/avr/platform.mk b/platforms/avr/platform.mk index 4d9cafaeef..9f304d2e20 100644 --- a/platforms/avr/platform.mk +++ b/platforms/avr/platform.mk @@ -18,6 +18,13 @@ COMPILEFLAGS += -ffunction-sections COMPILEFLAGS += -fdata-sections COMPILEFLAGS += -fpack-struct COMPILEFLAGS += -fshort-enums +COMPILEFLAGS += -mcall-prologues + +# Linker relaxation is only possible if +# link time optimizations are not enabled. +ifeq ($(strip $(LTO_ENABLE)), no) + COMPILEFLAGS += -mrelax +endif ASFLAGS += $(AVR_ASFLAGS) @@ -28,7 +35,7 @@ CFLAGS += -fno-strict-aliasing CXXFLAGS += $(COMPILEFLAGS) CXXFLAGS += -fno-exceptions -std=c++11 -LDFLAGS +=-Wl,--gc-sections +LDFLAGS += -Wl,--gc-sections OPT_DEFS += -DF_CPU=$(F_CPU)UL diff --git a/platforms/chibios/_pin_defs.h b/platforms/chibios/_pin_defs.h new file mode 100644 index 0000000000..0d96e2fc3b --- /dev/null +++ b/platforms/chibios/_pin_defs.h @@ -0,0 +1,289 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#if defined(MCU_KINETIS) +// TODO: including this avoids "error: expected identifier before '(' token" errors +// here just to please KINETIS builds... +# include <hal.h> +#endif + +#define A0 PAL_LINE(GPIOA, 0) +#define A1 PAL_LINE(GPIOA, 1) +#define A2 PAL_LINE(GPIOA, 2) +#define A3 PAL_LINE(GPIOA, 3) +#define A4 PAL_LINE(GPIOA, 4) +#define A5 PAL_LINE(GPIOA, 5) +#define A6 PAL_LINE(GPIOA, 6) +#define A7 PAL_LINE(GPIOA, 7) +#define A8 PAL_LINE(GPIOA, 8) +#define A9 PAL_LINE(GPIOA, 9) +#define A10 PAL_LINE(GPIOA, 10) +#define A11 PAL_LINE(GPIOA, 11) +#define A12 PAL_LINE(GPIOA, 12) +#define A13 PAL_LINE(GPIOA, 13) +#define A14 PAL_LINE(GPIOA, 14) +#define A15 PAL_LINE(GPIOA, 15) +#define A16 PAL_LINE(GPIOA, 16) +#define A17 PAL_LINE(GPIOA, 17) +#define A18 PAL_LINE(GPIOA, 18) +#define A19 PAL_LINE(GPIOA, 19) +#define A20 PAL_LINE(GPIOA, 20) +#define A21 PAL_LINE(GPIOA, 21) +#define A22 PAL_LINE(GPIOA, 22) +#define A23 PAL_LINE(GPIOA, 23) +#define A24 PAL_LINE(GPIOA, 24) +#define A25 PAL_LINE(GPIOA, 25) +#define A26 PAL_LINE(GPIOA, 26) +#define A27 PAL_LINE(GPIOA, 27) +#define A28 PAL_LINE(GPIOA, 28) +#define A29 PAL_LINE(GPIOA, 29) +#define A30 PAL_LINE(GPIOA, 30) +#define A31 PAL_LINE(GPIOA, 31) +#define A32 PAL_LINE(GPIOA, 32) +#define B0 PAL_LINE(GPIOB, 0) +#define B1 PAL_LINE(GPIOB, 1) +#define B2 PAL_LINE(GPIOB, 2) +#define B3 PAL_LINE(GPIOB, 3) +#define B4 PAL_LINE(GPIOB, 4) +#define B5 PAL_LINE(GPIOB, 5) +#define B6 PAL_LINE(GPIOB, 6) +#define B7 PAL_LINE(GPIOB, 7) +#define B8 PAL_LINE(GPIOB, 8) +#define B9 PAL_LINE(GPIOB, 9) +#define B10 PAL_LINE(GPIOB, 10) +#define B11 PAL_LINE(GPIOB, 11) +#define B12 PAL_LINE(GPIOB, 12) +#define B13 PAL_LINE(GPIOB, 13) +#define B14 PAL_LINE(GPIOB, 14) +#define B15 PAL_LINE(GPIOB, 15) +#define B16 PAL_LINE(GPIOB, 16) +#define B17 PAL_LINE(GPIOB, 17) +#define B18 PAL_LINE(GPIOB, 18) +#define B19 PAL_LINE(GPIOB, 19) +#define B20 PAL_LINE(GPIOB, 20) +#define B21 PAL_LINE(GPIOB, 21) +#define B22 PAL_LINE(GPIOB, 22) +#define B23 PAL_LINE(GPIOB, 23) +#define B24 PAL_LINE(GPIOB, 24) +#define B25 PAL_LINE(GPIOB, 25) +#define B26 PAL_LINE(GPIOB, 26) +#define B27 PAL_LINE(GPIOB, 27) +#define B28 PAL_LINE(GPIOB, 28) +#define B29 PAL_LINE(GPIOB, 29) +#define B30 PAL_LINE(GPIOB, 30) +#define B31 PAL_LINE(GPIOB, 31) +#define B32 PAL_LINE(GPIOB, 32) +#define C0 PAL_LINE(GPIOC, 0) +#define C1 PAL_LINE(GPIOC, 1) +#define C2 PAL_LINE(GPIOC, 2) +#define C3 PAL_LINE(GPIOC, 3) +#define C4 PAL_LINE(GPIOC, 4) +#define C5 PAL_LINE(GPIOC, 5) +#define C6 PAL_LINE(GPIOC, 6) +#define C7 PAL_LINE(GPIOC, 7) +#define C8 PAL_LINE(GPIOC, 8) +#define C9 PAL_LINE(GPIOC, 9) +#define C10 PAL_LINE(GPIOC, 10) +#define C11 PAL_LINE(GPIOC, 11) +#define C12 PAL_LINE(GPIOC, 12) +#define C13 PAL_LINE(GPIOC, 13) +#define C14 PAL_LINE(GPIOC, 14) +#define C15 PAL_LINE(GPIOC, 15) +#define C16 PAL_LINE(GPIOC, 16) +#define C17 PAL_LINE(GPIOC, 17) +#define C18 PAL_LINE(GPIOC, 18) +#define C19 PAL_LINE(GPIOC, 19) +#define C20 PAL_LINE(GPIOC, 20) +#define C21 PAL_LINE(GPIOC, 21) +#define C22 PAL_LINE(GPIOC, 22) +#define C23 PAL_LINE(GPIOC, 23) +#define C24 PAL_LINE(GPIOC, 24) +#define C25 PAL_LINE(GPIOC, 25) +#define C26 PAL_LINE(GPIOC, 26) +#define C27 PAL_LINE(GPIOC, 27) +#define C28 PAL_LINE(GPIOC, 28) +#define C29 PAL_LINE(GPIOC, 29) +#define C30 PAL_LINE(GPIOC, 30) +#define C31 PAL_LINE(GPIOC, 31) +#define C32 PAL_LINE(GPIOC, 32) +#define D0 PAL_LINE(GPIOD, 0) +#define D1 PAL_LINE(GPIOD, 1) +#define D2 PAL_LINE(GPIOD, 2) +#define D3 PAL_LINE(GPIOD, 3) +#define D4 PAL_LINE(GPIOD, 4) +#define D5 PAL_LINE(GPIOD, 5) +#define D6 PAL_LINE(GPIOD, 6) +#define D7 PAL_LINE(GPIOD, 7) +#define D8 PAL_LINE(GPIOD, 8) +#define D9 PAL_LINE(GPIOD, 9) +#define D10 PAL_LINE(GPIOD, 10) +#define D11 PAL_LINE(GPIOD, 11) +#define D12 PAL_LINE(GPIOD, 12) +#define D13 PAL_LINE(GPIOD, 13) +#define D14 PAL_LINE(GPIOD, 14) +#define D15 PAL_LINE(GPIOD, 15) +#define D16 PAL_LINE(GPIOD, 16) +#define D17 PAL_LINE(GPIOD, 17) +#define D18 PAL_LINE(GPIOD, 18) +#define D19 PAL_LINE(GPIOD, 19) +#define D20 PAL_LINE(GPIOD, 20) +#define D21 PAL_LINE(GPIOD, 21) +#define D22 PAL_LINE(GPIOD, 22) +#define D23 PAL_LINE(GPIOD, 23) +#define D24 PAL_LINE(GPIOD, 24) +#define D25 PAL_LINE(GPIOD, 25) +#define D26 PAL_LINE(GPIOD, 26) +#define D27 PAL_LINE(GPIOD, 27) +#define D28 PAL_LINE(GPIOD, 28) +#define D29 PAL_LINE(GPIOD, 29) +#define D30 PAL_LINE(GPIOD, 30) +#define D31 PAL_LINE(GPIOD, 31) +#define D32 PAL_LINE(GPIOD, 32) +#define E0 PAL_LINE(GPIOE, 0) +#define E1 PAL_LINE(GPIOE, 1) +#define E2 PAL_LINE(GPIOE, 2) +#define E3 PAL_LINE(GPIOE, 3) +#define E4 PAL_LINE(GPIOE, 4) +#define E5 PAL_LINE(GPIOE, 5) +#define E6 PAL_LINE(GPIOE, 6) +#define E7 PAL_LINE(GPIOE, 7) +#define E8 PAL_LINE(GPIOE, 8) +#define E9 PAL_LINE(GPIOE, 9) +#define E10 PAL_LINE(GPIOE, 10) +#define E11 PAL_LINE(GPIOE, 11) +#define E12 PAL_LINE(GPIOE, 12) +#define E13 PAL_LINE(GPIOE, 13) +#define E14 PAL_LINE(GPIOE, 14) +#define E15 PAL_LINE(GPIOE, 15) +#define E16 PAL_LINE(GPIOE, 16) +#define E17 PAL_LINE(GPIOE, 17) +#define E18 PAL_LINE(GPIOE, 18) +#define E19 PAL_LINE(GPIOE, 19) +#define E20 PAL_LINE(GPIOE, 20) +#define E21 PAL_LINE(GPIOE, 21) +#define E22 PAL_LINE(GPIOE, 22) +#define E23 PAL_LINE(GPIOE, 23) +#define E24 PAL_LINE(GPIOE, 24) +#define E25 PAL_LINE(GPIOE, 25) +#define E26 PAL_LINE(GPIOE, 26) +#define E27 PAL_LINE(GPIOE, 27) +#define E28 PAL_LINE(GPIOE, 28) +#define E29 PAL_LINE(GPIOE, 29) +#define E30 PAL_LINE(GPIOE, 30) +#define E31 PAL_LINE(GPIOE, 31) +#define E32 PAL_LINE(GPIOE, 32) +#define F0 PAL_LINE(GPIOF, 0) +#define F1 PAL_LINE(GPIOF, 1) +#define F2 PAL_LINE(GPIOF, 2) +#define F3 PAL_LINE(GPIOF, 3) +#define F4 PAL_LINE(GPIOF, 4) +#define F5 PAL_LINE(GPIOF, 5) +#define F6 PAL_LINE(GPIOF, 6) +#define F7 PAL_LINE(GPIOF, 7) +#define F8 PAL_LINE(GPIOF, 8) +#define F9 PAL_LINE(GPIOF, 9) +#define F10 PAL_LINE(GPIOF, 10) +#define F11 PAL_LINE(GPIOF, 11) +#define F12 PAL_LINE(GPIOF, 12) +#define F13 PAL_LINE(GPIOF, 13) +#define F14 PAL_LINE(GPIOF, 14) +#define F15 PAL_LINE(GPIOF, 15) +#define G0 PAL_LINE(GPIOG, 0) +#define G1 PAL_LINE(GPIOG, 1) +#define G2 PAL_LINE(GPIOG, 2) +#define G3 PAL_LINE(GPIOG, 3) +#define G4 PAL_LINE(GPIOG, 4) +#define G5 PAL_LINE(GPIOG, 5) +#define G6 PAL_LINE(GPIOG, 6) +#define G7 PAL_LINE(GPIOG, 7) +#define G8 PAL_LINE(GPIOG, 8) +#define G9 PAL_LINE(GPIOG, 9) +#define G10 PAL_LINE(GPIOG, 10) +#define G11 PAL_LINE(GPIOG, 11) +#define G12 PAL_LINE(GPIOG, 12) +#define G13 PAL_LINE(GPIOG, 13) +#define G14 PAL_LINE(GPIOG, 14) +#define G15 PAL_LINE(GPIOG, 15) +#define H0 PAL_LINE(GPIOH, 0) +#define H1 PAL_LINE(GPIOH, 1) +#define H2 PAL_LINE(GPIOH, 2) +#define H3 PAL_LINE(GPIOH, 3) +#define H4 PAL_LINE(GPIOH, 4) +#define H5 PAL_LINE(GPIOH, 5) +#define H6 PAL_LINE(GPIOH, 6) +#define H7 PAL_LINE(GPIOH, 7) +#define H8 PAL_LINE(GPIOH, 8) +#define H9 PAL_LINE(GPIOH, 9) +#define H10 PAL_LINE(GPIOH, 10) +#define H11 PAL_LINE(GPIOH, 11) +#define H12 PAL_LINE(GPIOH, 12) +#define H13 PAL_LINE(GPIOH, 13) +#define H14 PAL_LINE(GPIOH, 14) +#define H15 PAL_LINE(GPIOH, 15) +#define I0 PAL_LINE(GPIOI, 0) +#define I1 PAL_LINE(GPIOI, 1) +#define I2 PAL_LINE(GPIOI, 2) +#define I3 PAL_LINE(GPIOI, 3) +#define I4 PAL_LINE(GPIOI, 4) +#define I5 PAL_LINE(GPIOI, 5) +#define I6 PAL_LINE(GPIOI, 6) +#define I7 PAL_LINE(GPIOI, 7) +#define I8 PAL_LINE(GPIOI, 8) +#define I9 PAL_LINE(GPIOI, 9) +#define I10 PAL_LINE(GPIOI, 10) +#define I11 PAL_LINE(GPIOI, 11) +#define I12 PAL_LINE(GPIOI, 12) +#define I13 PAL_LINE(GPIOI, 13) +#define I14 PAL_LINE(GPIOI, 14) +#define I15 PAL_LINE(GPIOI, 15) +#define J0 PAL_LINE(GPIOJ, 0) +#define J1 PAL_LINE(GPIOJ, 1) +#define J2 PAL_LINE(GPIOJ, 2) +#define J3 PAL_LINE(GPIOJ, 3) +#define J4 PAL_LINE(GPIOJ, 4) +#define J5 PAL_LINE(GPIOJ, 5) +#define J6 PAL_LINE(GPIOJ, 6) +#define J7 PAL_LINE(GPIOJ, 7) +#define J8 PAL_LINE(GPIOJ, 8) +#define J9 PAL_LINE(GPIOJ, 9) +#define J10 PAL_LINE(GPIOJ, 10) +#define J11 PAL_LINE(GPIOJ, 11) +#define J12 PAL_LINE(GPIOJ, 12) +#define J13 PAL_LINE(GPIOJ, 13) +#define J14 PAL_LINE(GPIOJ, 14) +#define J15 PAL_LINE(GPIOJ, 15) +// Keyboards can `#define KEYBOARD_REQUIRES_GPIOK` if they need to access GPIO-K pins. These conflict with a whole +// bunch of layout definitions, so it's intentionally left out unless absolutely required -- in that case, the +// keyboard designer should use a different symbol when defining their layout macros. +#ifdef KEYBOARD_REQUIRES_GPIOK +# define K0 PAL_LINE(GPIOK, 0) +# define K1 PAL_LINE(GPIOK, 1) +# define K2 PAL_LINE(GPIOK, 2) +# define K3 PAL_LINE(GPIOK, 3) +# define K4 PAL_LINE(GPIOK, 4) +# define K5 PAL_LINE(GPIOK, 5) +# define K6 PAL_LINE(GPIOK, 6) +# define K7 PAL_LINE(GPIOK, 7) +# define K8 PAL_LINE(GPIOK, 8) +# define K9 PAL_LINE(GPIOK, 9) +# define K10 PAL_LINE(GPIOK, 10) +# define K11 PAL_LINE(GPIOK, 11) +# define K12 PAL_LINE(GPIOK, 12) +# define K13 PAL_LINE(GPIOK, 13) +# define K14 PAL_LINE(GPIOK, 14) +# define K15 PAL_LINE(GPIOK, 15) +#endif diff --git a/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/board.h b/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/board.h index 30af6b0c86..78dcbac05c 100644 --- a/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/board.h +++ b/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/board.h @@ -17,4 +17,61 @@ #include_next "board.h" +// Force B9 as input to align with qmk defaults +#undef VAL_GPIOB_MODER +#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ + PIN_MODE_INPUT(GPIOB_PIN1) | \ + PIN_MODE_INPUT(GPIOB_PIN2) | \ + PIN_MODE_ALTERNATE(GPIOB_SWO) | \ + PIN_MODE_INPUT(GPIOB_PIN4) | \ + PIN_MODE_INPUT(GPIOB_PIN5) | \ + PIN_MODE_INPUT(GPIOB_LSM303DLHC_SCL) | \ + PIN_MODE_INPUT(GPIOB_PIN7) | \ + PIN_MODE_INPUT(GPIOB_PIN8) | \ + PIN_MODE_INPUT(GPIOB_LSM303DLHC_SDA) | \ + PIN_MODE_ALTERNATE(GPIOB_MP45DT02_CLK_IN) |\ + PIN_MODE_INPUT(GPIOB_PIN11) | \ + PIN_MODE_INPUT(GPIOB_PIN12) | \ + PIN_MODE_INPUT(GPIOB_PIN13) | \ + PIN_MODE_INPUT(GPIOB_PIN14) | \ + PIN_MODE_INPUT(GPIOB_PIN15)) + +#undef VAL_GPIOB_PUPDR +#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOB_SWO) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOB_LSM303DLHC_SCL) |\ + PIN_PUPDR_PULLUP(GPIOB_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOB_LSM303DLHC_SDA) |\ + PIN_PUPDR_FLOATING(GPIOB_MP45DT02_CLK_IN) |\ + PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN15)) + +#undef VAL_GPIOB_AFRL +#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOB_SWO, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOB_LSM303DLHC_SCL, 0) | \ + PIN_AFIO_AF(GPIOB_PIN7, 0U)) + +#undef VAL_GPIOB_AFRH +#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOB_LSM303DLHC_SDA, 0) | \ + PIN_AFIO_AF(GPIOB_MP45DT02_CLK_IN, 5U) |\ + PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN15, 0U)) + #undef STM32_HSE_BYPASS diff --git a/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h index c6f5a8ac52..e0af4a276b 100644 --- a/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -186,7 +186,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE diff --git a/platforms/chibios/boards/GENERIC_STM32_F401XC/board/board.mk b/platforms/chibios/boards/GENERIC_STM32_F401XC/board/board.mk new file mode 100644 index 0000000000..fddf7dace4 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_F401XC/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_STM32F401C_DISCOVERY/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_STM32F401C_DISCOVERY + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/board.h b/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/board.h new file mode 100644 index 0000000000..78dcbac05c --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/board.h @@ -0,0 +1,77 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#include_next "board.h" + +// Force B9 as input to align with qmk defaults +#undef VAL_GPIOB_MODER +#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ + PIN_MODE_INPUT(GPIOB_PIN1) | \ + PIN_MODE_INPUT(GPIOB_PIN2) | \ + PIN_MODE_ALTERNATE(GPIOB_SWO) | \ + PIN_MODE_INPUT(GPIOB_PIN4) | \ + PIN_MODE_INPUT(GPIOB_PIN5) | \ + PIN_MODE_INPUT(GPIOB_LSM303DLHC_SCL) | \ + PIN_MODE_INPUT(GPIOB_PIN7) | \ + PIN_MODE_INPUT(GPIOB_PIN8) | \ + PIN_MODE_INPUT(GPIOB_LSM303DLHC_SDA) | \ + PIN_MODE_ALTERNATE(GPIOB_MP45DT02_CLK_IN) |\ + PIN_MODE_INPUT(GPIOB_PIN11) | \ + PIN_MODE_INPUT(GPIOB_PIN12) | \ + PIN_MODE_INPUT(GPIOB_PIN13) | \ + PIN_MODE_INPUT(GPIOB_PIN14) | \ + PIN_MODE_INPUT(GPIOB_PIN15)) + +#undef VAL_GPIOB_PUPDR +#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOB_SWO) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOB_LSM303DLHC_SCL) |\ + PIN_PUPDR_PULLUP(GPIOB_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOB_LSM303DLHC_SDA) |\ + PIN_PUPDR_FLOATING(GPIOB_MP45DT02_CLK_IN) |\ + PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN15)) + +#undef VAL_GPIOB_AFRL +#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOB_SWO, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOB_LSM303DLHC_SCL, 0) | \ + PIN_AFIO_AF(GPIOB_PIN7, 0U)) + +#undef VAL_GPIOB_AFRH +#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOB_LSM303DLHC_SDA, 0) | \ + PIN_AFIO_AF(GPIOB_MP45DT02_CLK_IN, 5U) |\ + PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN15, 0U)) + +#undef STM32_HSE_BYPASS diff --git a/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/config.h new file mode 100644 index 0000000000..e06ca0b725 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/config.h @@ -0,0 +1,22 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#define BOARD_OTG_NOVBUSSENS 1 + +#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP +# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#endif diff --git a/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/mcuconf.h new file mode 100644 index 0000000000..24cec7137d --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_F401XC/configs/mcuconf.h @@ -0,0 +1,244 @@ +/* + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF +#define STM32F401_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 4 +#define STM32_PLLN_VALUE 168 +#define STM32_PLLP_VALUE 4 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV1 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART6_PRIORITY 12 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM10 FALSE +#define STM32_GPT_USE_TIM11 FALSE + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_USE_TIM10 FALSE +#define STM32_ICU_USE_TIM11 FALSE + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_USE_TIM10 FALSE +#define STM32_PWM_USE_TIM11 FALSE + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART6 FALSE + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 TRUE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_HOST_WAKEUP_DURATION 2 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h index 908a580a91..394e750256 100644 --- a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -86,6 +86,28 @@ #define STM32_IRQ_EXTI21_PRIORITY 15 #define STM32_IRQ_EXTI22_PRIORITY 15 +#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 +#define STM32_IRQ_TIM6_PRIORITY 7 +#define STM32_IRQ_TIM7_PRIORITY 7 +#define STM32_IRQ_TIM8_BRK_TIM12_PRIORITY 7 +#define STM32_IRQ_TIM8_UP_TIM13_PRIORITY 7 +#define STM32_IRQ_TIM8_TRGCO_TIM14_PRIORITY 7 +#define STM32_IRQ_TIM8_CC_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART3_PRIORITY 12 +#define STM32_IRQ_UART4_PRIORITY 12 +#define STM32_IRQ_UART5_PRIORITY 12 +#define STM32_IRQ_USART6_PRIORITY 12 + /* * ADC driver system settings. */ @@ -137,21 +159,11 @@ #define STM32_GPT_USE_TIM7 FALSE #define STM32_GPT_USE_TIM8 FALSE #define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM10 FALSE #define STM32_GPT_USE_TIM11 FALSE #define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM13 FALSE #define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 /* * I2C driver system settings. @@ -199,13 +211,11 @@ #define STM32_ICU_USE_TIM5 FALSE #define STM32_ICU_USE_TIM8 FALSE #define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 +#define STM32_ICU_USE_TIM10 FALSE +#define STM32_ICU_USE_TIM11 FALSE +#define STM32_ICU_USE_TIM12 FALSE +#define STM32_ICU_USE_TIM13 FALSE +#define STM32_ICU_USE_TIM14 FALSE /* * MAC driver system settings. @@ -221,7 +231,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE @@ -229,13 +238,11 @@ #define STM32_PWM_USE_TIM5 FALSE #define STM32_PWM_USE_TIM8 FALSE #define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 +#define STM32_PWM_USE_TIM10 FALSE +#define STM32_PWM_USE_TIM11 FALSE +#define STM32_PWM_USE_TIM12 FALSE +#define STM32_PWM_USE_TIM13 FALSE +#define STM32_PWM_USE_TIM14 FALSE /* * RTC driver system settings. @@ -265,12 +272,6 @@ #define STM32_SERIAL_USE_UART4 FALSE #define STM32_SERIAL_USE_UART5 FALSE #define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 /* * SPI driver system settings. @@ -319,12 +320,6 @@ #define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) #define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) #define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 #define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART3_DMA_PRIORITY 0 diff --git a/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h index 928ee56c71..07399ad2f7 100644 --- a/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -86,6 +86,28 @@ #define STM32_IRQ_EXTI21_PRIORITY 15 #define STM32_IRQ_EXTI22_PRIORITY 15 +#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 +#define STM32_IRQ_TIM6_PRIORITY 7 +#define STM32_IRQ_TIM7_PRIORITY 7 +#define STM32_IRQ_TIM8_BRK_TIM12_PRIORITY 7 +#define STM32_IRQ_TIM8_UP_TIM13_PRIORITY 7 +#define STM32_IRQ_TIM8_TRGCO_TIM14_PRIORITY 7 +#define STM32_IRQ_TIM8_CC_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART3_PRIORITY 12 +#define STM32_IRQ_UART4_PRIORITY 12 +#define STM32_IRQ_UART5_PRIORITY 12 +#define STM32_IRQ_USART6_PRIORITY 12 + /* * ADC driver system settings. */ @@ -137,21 +159,11 @@ #define STM32_GPT_USE_TIM7 FALSE #define STM32_GPT_USE_TIM8 FALSE #define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM10 FALSE #define STM32_GPT_USE_TIM11 FALSE #define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM13 FALSE #define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 /* * I2C driver system settings. @@ -199,13 +211,11 @@ #define STM32_ICU_USE_TIM5 FALSE #define STM32_ICU_USE_TIM8 FALSE #define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 +#define STM32_ICU_USE_TIM10 FALSE +#define STM32_ICU_USE_TIM11 FALSE +#define STM32_ICU_USE_TIM12 FALSE +#define STM32_ICU_USE_TIM13 FALSE +#define STM32_ICU_USE_TIM14 FALSE /* * MAC driver system settings. @@ -221,7 +231,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE @@ -229,13 +238,11 @@ #define STM32_PWM_USE_TIM5 FALSE #define STM32_PWM_USE_TIM8 FALSE #define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 +#define STM32_PWM_USE_TIM10 FALSE +#define STM32_PWM_USE_TIM11 FALSE +#define STM32_PWM_USE_TIM12 FALSE +#define STM32_PWM_USE_TIM13 FALSE +#define STM32_PWM_USE_TIM14 FALSE /* * RTC driver system settings. @@ -265,12 +272,6 @@ #define STM32_SERIAL_USE_UART4 FALSE #define STM32_SERIAL_USE_UART5 FALSE #define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 /* * SPI driver system settings. @@ -319,12 +320,6 @@ #define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) #define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) #define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 #define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART3_DMA_PRIORITY 0 diff --git a/platforms/chibios/boards/GENERIC_STM32_F411XE/board/board.mk b/platforms/chibios/boards/GENERIC_STM32_F411XE/board/board.mk new file mode 100644 index 0000000000..bb00b1a2b0 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_F411XE/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F411RE/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F411RE + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/board.h b/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/board.h new file mode 100644 index 0000000000..30af6b0c86 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/board.h @@ -0,0 +1,20 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#include_next "board.h" + +#undef STM32_HSE_BYPASS diff --git a/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/config.h new file mode 100644 index 0000000000..e06ca0b725 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/config.h @@ -0,0 +1,22 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#define BOARD_OTG_NOVBUSSENS 1 + +#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP +# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#endif diff --git a/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/mcuconf.h new file mode 100644 index 0000000000..e1d45ca487 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_F411XE/configs/mcuconf.h @@ -0,0 +1,252 @@ +/* + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF +#define STM32F411_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 4 +#define STM32_PLLN_VALUE 96 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 4 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV1 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART6_PRIORITY 12 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM10 FALSE +#define STM32_GPT_USE_TIM11 FALSE + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_USE_TIM10 FALSE +#define STM32_ICU_USE_TIM11 FALSE + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_USE_TIM10 FALSE +#define STM32_PWM_USE_TIM11 FALSE + +/* + * RTC driver system settings. + */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_RTC_TAMPCR_INIT 0 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART6 FALSE + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 TRUE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_HOST_WAKEUP_DURATION 2 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h index d115028300..fd00280115 100644 --- a/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -39,6 +39,7 @@ * HAL driver system settings. */ #define STM32_NO_INIT FALSE +#define STM32_CLOCK_DYNAMIC FALSE #define STM32_VOS STM32_VOS_RANGE1 #define STM32_PWR_BOOST TRUE #define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0) @@ -227,7 +228,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE @@ -240,6 +240,13 @@ /* * RTC driver system settings. */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_TAMP_CR1_INIT 0 +#define STM32_TAMP_CR2_INIT 0 +#define STM32_TAMP_FLTCR_INIT 0 +#define STM32_TAMP_IER_INIT 0 /* * SDC driver system settings. @@ -255,6 +262,15 @@ #define STM32_SERIAL_USE_LPUART1 FALSE /* + * SIO driver system settings. + */ +#define STM32_SIO_USE_USART1 FALSE +#define STM32_SIO_USE_USART2 FALSE +#define STM32_SIO_USE_USART3 FALSE +#define STM32_SIO_USE_UART4 FALSE +#define STM32_SIO_USE_LPUART1 FALSE + +/* * SPI driver system settings. */ #define STM32_SPI_USE_SPI1 FALSE diff --git a/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h index 5710e2cb45..d6385da624 100644 --- a/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -41,6 +41,7 @@ * HAL driver system settings. */ #define STM32_NO_INIT FALSE +#define STM32_CLOCK_DYNAMIC FALSE #define STM32_VOS STM32_VOS_RANGE1 #define STM32_PWR_BOOST TRUE #define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0) @@ -274,7 +275,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE @@ -289,6 +289,13 @@ /* * RTC driver system settings. */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_TAMP_CR1_INIT 0 +#define STM32_TAMP_CR2_INIT 0 +#define STM32_TAMP_FLTCR_INIT 0 +#define STM32_TAMP_IER_INIT 0 /* * SDC driver system settings. @@ -305,6 +312,16 @@ #define STM32_SERIAL_USE_LPUART1 FALSE /* + * SIO driver system settings. + */ +#define STM32_SIO_USE_USART1 FALSE +#define STM32_SIO_USE_USART2 FALSE +#define STM32_SIO_USE_USART3 FALSE +#define STM32_SIO_USE_UART4 FALSE +#define STM32_SIO_USE_UART5 FALSE +#define STM32_SIO_USE_LPUART1 FALSE + +/* * SPI driver system settings. */ #define STM32_SPI_USE_SPI1 FALSE @@ -383,5 +400,6 @@ */ #define STM32_WSPI_USE_QUADSPI1 FALSE #define STM32_WSPI_QUADSPI1_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_WSPI_QUADSPI1_PRESCALER_VALUE 1 #endif /* MCUCONF_H */ diff --git a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h index 2e37d95fe3..de5f85acdd 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h +++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h @@ -18,7 +18,4 @@ #include_next "board.h" #undef STM32L432xx - -// Pretend that we're an L443xx as the ChibiOS definitions for L4x2/L4x3 mistakenly don't enable GPIOH, I2C2, or SPI2. -// Until ChibiOS upstream is fixed, this should be kept at L443, as nothing in QMK currently utilises the crypto peripheral on the L443. -#define STM32L443xx +#define STM32L422xx diff --git a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h index fc9055ccfb..d67de4cfe2 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h +++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h @@ -18,8 +18,6 @@ /* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606. */ -#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH - #ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP # define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE #endif diff --git a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h index 8ad5a8da21..47f1598b74 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -32,12 +32,7 @@ #define MCUCONF_H #define STM32L4xx_MCUCONF -#define STM32L412_MCUCONF #define STM32L422_MCUCONF -#define STM32L432_MCUCONF -#define STM32L433_MCUCONF -#define STM32L442_MCUCONF -#define STM32L443_MCUCONF /* * HAL driver system settings. @@ -52,16 +47,13 @@ #define STM32_HSE_ENABLED FALSE #define STM32_LSE_ENABLED FALSE #define STM32_MSIPLL_ENABLED FALSE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_SAI1_CLOCK_ENABLED TRUE -#define STM32_SAI2_CLOCK_ENABLED TRUE #define STM32_MSIRANGE STM32_MSIRANGE_4M #define STM32_MSISRANGE STM32_MSISRANGE_4M #define STM32_SW STM32_SW_PLL #define STM32_PLLSRC STM32_PLLSRC_HSI16 #define STM32_PLLM_VALUE 4 #define STM32_PLLN_VALUE 80 +#define STM32_PLLPDIV_VALUE 0 #define STM32_PLLP_VALUE 7 #define STM32_PLLQ_VALUE 4 #define STM32_PLLR_VALUE 4 @@ -73,29 +65,22 @@ #define STM32_MCOPRE STM32_MCOPRE_DIV1 #define STM32_LSCOSEL STM32_LSCOSEL_NOCLOCK #define STM32_PLLSAI1N_VALUE 72 +#define STM32_PLLSAI1PDIV_VALUE 6 #define STM32_PLLSAI1P_VALUE 7 #define STM32_PLLSAI1Q_VALUE 6 #define STM32_PLLSAI1R_VALUE 6 -#define STM32_PLLSAI2N_VALUE 72 -#define STM32_PLLSAI2P_VALUE 7 -#define STM32_PLLSAI2R_VALUE 6 /* * Peripherals clock sources. */ #define STM32_USART1SEL STM32_USART1SEL_SYSCLK #define STM32_USART2SEL STM32_USART2SEL_SYSCLK -#define STM32_USART3SEL STM32_USART3SEL_SYSCLK -#define STM32_UART4SEL STM32_UART4SEL_SYSCLK -#define STM32_UART5SEL STM32_UART5SEL_SYSCLK #define STM32_LPUART1SEL STM32_LPUART1SEL_SYSCLK #define STM32_I2C1SEL STM32_I2C1SEL_SYSCLK -#define STM32_I2C2SEL STM32_I2C2SEL_SYSCLK #define STM32_I2C3SEL STM32_I2C3SEL_SYSCLK #define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1 #define STM32_LPTIM2SEL STM32_LPTIM2SEL_PCLK1 #define STM32_SAI1SEL STM32_SAI1SEL_OFF -#define STM32_SAI2SEL STM32_SAI2SEL_OFF #define STM32_CLK48SEL STM32_CLK48SEL_HSI48 #define STM32_ADCSEL STM32_ADCSEL_SYSCLK #define STM32_SWPMI1SEL STM32_SWPMI1SEL_PCLK1 @@ -127,7 +112,6 @@ #define STM32_IRQ_USART1_PRIORITY 12 #define STM32_IRQ_USART2_PRIORITY 12 -#define STM32_IRQ_USART3_PRIORITY 12 #define STM32_IRQ_LPUART1_PRIORITY 12 /* @@ -137,29 +121,15 @@ #define STM32_ADC_USE_ADC1 FALSE #define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) #define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_ADC_ADC2_DMA_PRIORITY 2 #define STM32_ADC_ADC12_IRQ_PRIORITY 5 #define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 #define STM32_ADC_ADC123_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 #define STM32_ADC_ADC123_PRESC ADC_CCR_PRESC_DIV2 -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) /* * GPT driver system settings. @@ -198,7 +168,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM15 FALSE @@ -218,23 +187,22 @@ #define STM32_SERIAL_USE_USART1 FALSE #define STM32_SERIAL_USE_USART2 FALSE #define STM32_SERIAL_USE_LPUART1 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_LPUART1_PRIORITY 12 + +/* + * SIO driver system settings. + */ +#define STM32_SIO_USE_USART1 FALSE +#define STM32_SIO_USE_USART2 FALSE +#define STM32_SIO_USE_LPUART1 FALSE /* * SPI driver system settings. */ #define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI3 FALSE #define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) #define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) #define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 #define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 #define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") /* diff --git a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h index b1838b30a8..839d031ca4 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h +++ b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h @@ -2,9 +2,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later #pragma once -// Fixup equivalent usages within QMK as the base board definitions only go up to high -#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH - #ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP # define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE #endif diff --git a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h index 707134d49e..be64b04812 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -33,7 +33,6 @@ #define STM32L4xx_MCUCONF #define STM32L432_MCUCONF -#define STM32L433_MCUCONF /* * HAL driver system settings. @@ -183,7 +182,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM15 FALSE @@ -203,9 +201,13 @@ #define STM32_SERIAL_USE_USART1 FALSE #define STM32_SERIAL_USE_USART2 FALSE #define STM32_SERIAL_USE_LPUART1 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_LPUART1_PRIORITY 12 + +/* + * SIO driver system settings. + */ +#define STM32_SIO_USE_USART1 FALSE +#define STM32_SIO_USE_USART2 FALSE +#define STM32_SIO_USE_LPUART1 FALSE /* * SPI driver system settings. diff --git a/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h index fc9055ccfb..d67de4cfe2 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h +++ b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h @@ -18,8 +18,6 @@ /* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606. */ -#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH - #ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP # define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE #endif diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h b/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h index f812332960..cc10304a3f 100644 --- a/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h +++ b/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -29,7 +29,27 @@ #define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_1_ +#define _CHIBIOS_RT_CONF_VER_7_0_ + +/*===========================================================================*/ +/** + * @name System settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Handling of instances. + * @note If enabled then threads assigned to various instances can + * interact each other using the same synchronization objects. + * If disabled then each OS instance is a separate world, no + * direct interactions are handled by the OS. + */ +#if !defined(CH_CFG_SMP_MODE) +#define CH_CFG_SMP_MODE FALSE +#endif + +/** @} */ /*===========================================================================*/ /** @@ -161,6 +181,16 @@ #endif /** + * @brief Time Stamps APIs. + * @details If enabled then the time stamps APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TIMESTAMP) +#define CH_CFG_USE_TIMESTAMP TRUE +#endif + +/** * @brief Threads registry APIs. * @details If enabled then the registry APIs are included in the kernel. * @@ -631,7 +661,7 @@ * @details User fields added to the end of the @p ch_system_t structure. */ #define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ + /* Add system custom fields here.*/ /** * @brief System initialization hook. @@ -639,7 +669,23 @@ * just before interrupts are enabled globally. */ #define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ + /* Add system initialization code here.*/ \ +} + +/** + * @brief OS instance structure extension. + * @details User fields added to the end of the @p os_instance_t structure. + */ +#define CH_CFG_OS_INSTANCE_EXTRA_FIELDS \ + /* Add OS instance custom fields here.*/ + +/** + * @brief OS instance initialization hook. + * + * @param[in] oip pointer to the @p os_instance_t structure + */ +#define CH_CFG_OS_INSTANCE_INIT_HOOK(oip) { \ + /* Add OS instance initialization code here.*/ \ } /** @@ -655,6 +701,8 @@ * * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. + * + * @param[in] tp pointer to the @p thread_t structure */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ /* Add threads initialization code here.*/ \ @@ -663,6 +711,8 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. + * + * @param[in] tp pointer to the @p thread_t structure */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -671,6 +721,9 @@ /** * @brief Context switch hook. * @details This hook is invoked just before switching between threads. + * + * @param[in] ntp thread being switched in + * @param[in] otp thread being switched out */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ /* Context switch code here.*/ \ @@ -745,6 +798,14 @@ /* Trace code here.*/ \ } +/** + * @brief Runtime Faults Collection Unit hook. + * @details This hook is invoked each time new faults are collected and stored. + */ +#define CH_CFG_RUNTIME_FAULTS_HOOK(mask) { \ + /* Faults handling code here.*/ \ +} + /** @} */ /*===========================================================================*/ diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h b/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h index d7a639a6d0..8367328a04 100644 --- a/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h +++ b/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -29,7 +29,7 @@ #define HALCONF_H #define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_1_ +#define _CHIBIOS_HAL_CONF_VER_8_0_ #include <mcuconf.h> @@ -416,6 +416,26 @@ #endif /*===========================================================================*/ +/* SIO driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SIO_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SIO_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Support for thread synchronization API. + */ +#if !defined(SIO_USE_SYNCHRONIZATION) || defined(__DOXYGEN__) +#define SIO_USE_SYNCHRONIZATION TRUE +#endif + +/*===========================================================================*/ /* SERIAL_USB driver related setting. */ /*===========================================================================*/ @@ -451,11 +471,10 @@ #endif /** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. + * @brief Inserts an assertion on function errors before returning. */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE +#if !defined(SPI_USE_ASSERT_ON_ERROR) || defined(__DOXYGEN__) +#define SPI_USE_ASSERT_ON_ERROR TRUE #endif /** diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h b/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h index 4d7b586c08..cab4c29cf6 100644 --- a/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h +++ b/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -186,7 +186,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 TRUE diff --git a/platforms/chibios/boards/common/configs/chconf.h b/platforms/chibios/boards/common/configs/chconf.h index 18ad609ca1..5db836e37c 100644 --- a/platforms/chibios/boards/common/configs/chconf.h +++ b/platforms/chibios/boards/common/configs/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -29,7 +29,27 @@ #define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_1_ +#define _CHIBIOS_RT_CONF_VER_7_0_ + +/*===========================================================================*/ +/** + * @name System settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Handling of instances. + * @note If enabled then threads assigned to various instances can + * interact each other using the same synchronization objects. + * If disabled then each OS instance is a separate world, no + * direct interactions are handled by the OS. + */ +#if !defined(CH_CFG_SMP_MODE) +#define CH_CFG_SMP_MODE FALSE +#endif + +/** @} */ /*===========================================================================*/ /** @@ -161,6 +181,16 @@ #endif /** + * @brief Time Stamps APIs. + * @details If enabled then the time stamps APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TIMESTAMP) +#define CH_CFG_USE_TIMESTAMP TRUE +#endif + +/** * @brief Threads registry APIs. * @details If enabled then the registry APIs are included in the kernel. * @@ -631,7 +661,7 @@ * @details User fields added to the end of the @p ch_system_t structure. */ #define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ + /* Add system custom fields here.*/ /** * @brief System initialization hook. @@ -639,7 +669,23 @@ * just before interrupts are enabled globally. */ #define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ + /* Add system initialization code here.*/ \ +} + +/** + * @brief OS instance structure extension. + * @details User fields added to the end of the @p os_instance_t structure. + */ +#define CH_CFG_OS_INSTANCE_EXTRA_FIELDS \ + /* Add OS instance custom fields here.*/ + +/** + * @brief OS instance initialization hook. + * + * @param[in] oip pointer to the @p os_instance_t structure + */ +#define CH_CFG_OS_INSTANCE_INIT_HOOK(oip) { \ + /* Add OS instance initialization code here.*/ \ } /** @@ -655,6 +701,8 @@ * * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. + * + * @param[in] tp pointer to the @p thread_t structure */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ /* Add threads initialization code here.*/ \ @@ -663,6 +711,8 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. + * + * @param[in] tp pointer to the @p thread_t structure */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -671,6 +721,9 @@ /** * @brief Context switch hook. * @details This hook is invoked just before switching between threads. + * + * @param[in] ntp thread being switched in + * @param[in] otp thread being switched out */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ /* Context switch code here.*/ \ @@ -745,6 +798,14 @@ /* Trace code here.*/ \ } +/** + * @brief Runtime Faults Collection Unit hook. + * @details This hook is invoked each time new faults are collected and stored. + */ +#define CH_CFG_RUNTIME_FAULTS_HOOK(mask) { \ + /* Faults handling code here.*/ \ +} + /** @} */ /*===========================================================================*/ diff --git a/platforms/chibios/boards/common/configs/halconf.h b/platforms/chibios/boards/common/configs/halconf.h index c80f67ee27..1805a77438 100644 --- a/platforms/chibios/boards/common/configs/halconf.h +++ b/platforms/chibios/boards/common/configs/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -29,7 +29,7 @@ #define HALCONF_H #define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_1_ +#define _CHIBIOS_HAL_CONF_VER_8_0_ #include <mcuconf.h> @@ -416,6 +416,26 @@ #endif /*===========================================================================*/ +/* SIO driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SIO_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SIO_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Support for thread synchronization API. + */ +#if !defined(SIO_USE_SYNCHRONIZATION) || defined(__DOXYGEN__) +#define SIO_USE_SYNCHRONIZATION TRUE +#endif + +/*===========================================================================*/ /* SERIAL_USB driver related setting. */ /*===========================================================================*/ @@ -451,11 +471,10 @@ #endif /** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. + * @brief Inserts an assertion on function errors before returning. */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE +#if !defined(SPI_USE_ASSERT_ON_ERROR) || defined(__DOXYGEN__) +#define SPI_USE_ASSERT_ON_ERROR TRUE #endif /** diff --git a/platforms/chibios/boards/BLACKPILL_STM32_F401/ld/STM32F401xC_tinyuf2.ld b/platforms/chibios/boards/common/ld/STM32F401xC_tinyuf2.ld index f4e487dc8f..f4e487dc8f 100644 --- a/platforms/chibios/boards/BLACKPILL_STM32_F401/ld/STM32F401xC_tinyuf2.ld +++ b/platforms/chibios/boards/common/ld/STM32F401xC_tinyuf2.ld diff --git a/platforms/chibios/boards/BLACKPILL_STM32_F401/ld/STM32F401xE_tinyuf2.ld b/platforms/chibios/boards/common/ld/STM32F401xE_tinyuf2.ld index 895d13fa32..895d13fa32 100644 --- a/platforms/chibios/boards/BLACKPILL_STM32_F401/ld/STM32F401xE_tinyuf2.ld +++ b/platforms/chibios/boards/common/ld/STM32F401xE_tinyuf2.ld diff --git a/platforms/chibios/boards/BLACKPILL_STM32_F411/ld/STM32F411xC_tinyuf2.ld b/platforms/chibios/boards/common/ld/STM32F411xC_tinyuf2.ld index 82253d3de5..82253d3de5 100644 --- a/platforms/chibios/boards/BLACKPILL_STM32_F411/ld/STM32F411xC_tinyuf2.ld +++ b/platforms/chibios/boards/common/ld/STM32F411xC_tinyuf2.ld diff --git a/platforms/chibios/boards/BLACKPILL_STM32_F411/ld/STM32F411xE_tinyuf2.ld b/platforms/chibios/boards/common/ld/STM32F411xE_tinyuf2.ld index 1656c67bf7..1656c67bf7 100644 --- a/platforms/chibios/boards/BLACKPILL_STM32_F411/ld/STM32F411xE_tinyuf2.ld +++ b/platforms/chibios/boards/common/ld/STM32F411xE_tinyuf2.ld diff --git a/platforms/chibios/converters/promicro_to_proton_c/_pin_defs.h b/platforms/chibios/converters/promicro_to_proton_c/_pin_defs.h new file mode 100644 index 0000000000..ad1a81692e --- /dev/null +++ b/platforms/chibios/converters/promicro_to_proton_c/_pin_defs.h @@ -0,0 +1,41 @@ +// Copyright 2022 QMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Left side (front) +#define D3 PAL_LINE(GPIOA, 9) +#define D2 PAL_LINE(GPIOA, 10) +// GND +// GND +#define D1 PAL_LINE(GPIOB, 7) +#define D0 PAL_LINE(GPIOB, 6) +#define D4 PAL_LINE(GPIOB, 5) +#define C6 PAL_LINE(GPIOB, 4) +#define D7 PAL_LINE(GPIOB, 3) +#define E6 PAL_LINE(GPIOB, 2) +#define B4 PAL_LINE(GPIOB, 1) +#define B5 PAL_LINE(GPIOB, 0) + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 PAL_LINE(GPIOA, 2) +#define F5 PAL_LINE(GPIOA, 1) +#define F6 PAL_LINE(GPIOA, 0) +#define F7 PAL_LINE(GPIOB, 8) +#define B1 PAL_LINE(GPIOB, 13) +#define B3 PAL_LINE(GPIOB, 14) +#define B2 PAL_LINE(GPIOB, 15) +#define B6 PAL_LINE(GPIOB, 9) + +// LEDs (only D5/C13 uses an actual LED) +#ifdef CONVERT_TO_PROTON_C_RXLED +# define D5 PAL_LINE(GPIOC, 14) +# define B0 PAL_LINE(GPIOC, 13) +#else +# define D5 PAL_LINE(GPIOC, 13) +# define B0 PAL_LINE(GPIOC, 14) +#endif diff --git a/platforms/chibios/boards/QMK_PROTON_C/convert_to_proton_c.mk b/platforms/chibios/converters/promicro_to_proton_c/converter.mk index 0618154678..406adae32c 100644 --- a/platforms/chibios/boards/QMK_PROTON_C/convert_to_proton_c.mk +++ b/platforms/chibios/converters/promicro_to_proton_c/converter.mk @@ -1,9 +1,7 @@ # Proton C MCU settings for converting AVR projects -TARGET := $(TARGET)_proton_c MCU := STM32F303 BOARD := QMK_PROTON_C BOOTLOADER := stm32-dfu -OPT_DEFS += -DCONVERT_TO_PROTON_C # These are defaults based on what has been implemented for ARM boards AUDIO_ENABLE ?= yes diff --git a/platforms/chibios/drivers/ws2812_spi.c b/platforms/chibios/drivers/ws2812_spi.c index 76191db165..01d8148875 100644 --- a/platforms/chibios/drivers/ws2812_spi.c +++ b/platforms/chibios/drivers/ws2812_spi.c @@ -139,7 +139,33 @@ void ws2812_init(void) { #endif // WS2812_SPI_SCK_PIN // TODO: more dynamic baudrate - static const SPIConfig spicfg = {WS2812_SPI_BUFFER_MODE, NULL, PAL_PORT(RGB_DI_PIN), PAL_PAD(RGB_DI_PIN), WS2812_SPI_DIVISOR_CR1_BR_X}; + static const SPIConfig spicfg = { +#ifndef HAL_LLD_SELECT_SPI_V2 +// HAL_SPI_V1 +# if SPI_SUPPORTS_CIRCULAR == TRUE + WS2812_SPI_BUFFER_MODE, +# endif + NULL, // end_cb + PAL_PORT(RGB_DI_PIN), + PAL_PAD(RGB_DI_PIN), + WS2812_SPI_DIVISOR_CR1_BR_X, + 0 +#else + // HAL_SPI_V2 +# if SPI_SUPPORTS_CIRCULAR == TRUE + WS2812_SPI_BUFFER_MODE, +# endif +# if SPI_SUPPORTS_SLAVE_MODE == TRUE + false, +# endif + NULL, // data_cb + NULL, // error_cb + PAL_PORT(RGB_DI_PIN), + PAL_PAD(RGB_DI_PIN), + WS2812_SPI_DIVISOR_CR1_BR_X, + 0 +#endif + }; spiAcquireBus(&WS2812_SPI); /* Acquire ownership of the bus. */ spiStart(&WS2812_SPI, &spicfg); /* Setup transfer parameters. */ diff --git a/platforms/chibios/eeprom_stm32_defs.h b/platforms/chibios/eeprom_stm32_defs.h index a6ceb41355..57d0440330 100644 --- a/platforms/chibios/eeprom_stm32_defs.h +++ b/platforms/chibios/eeprom_stm32_defs.h @@ -25,7 +25,7 @@ # ifndef FEE_PAGE_COUNT # define FEE_PAGE_COUNT 2 // How many pages are used # endif -# elif defined(STM32F103xE) || defined(STM32F303xC) || defined(STM32F072xB) || defined(STM32F070xB) +# elif defined(STM32F103xE) || defined(STM32F303xC) || defined(STM32F303xE) || defined(STM32F072xB) || defined(STM32F070xB) # ifndef FEE_PAGE_SIZE # define FEE_PAGE_SIZE 0x800 // Page size = 2KByte # endif @@ -51,7 +51,7 @@ # define FEE_MCU_FLASH_SIZE 128 // Size in Kb # elif defined(STM32F303xC) || defined(STM32F401xC) # define FEE_MCU_FLASH_SIZE 256 // Size in Kb -# elif defined(STM32F103xE) || defined(STM32F401xE) || defined(STM32F411xE) +# elif defined(STM32F103xE) || defined(STM32F303xE) || defined(STM32F401xE) || defined(STM32F411xE) # define FEE_MCU_FLASH_SIZE 512 // Size in Kb # elif defined(STM32F405xG) # define FEE_MCU_FLASH_SIZE 1024 // Size in Kb diff --git a/platforms/chibios/flash.mk b/platforms/chibios/flash.mk index 6ee53172d2..a91ef2cf35 100644 --- a/platforms/chibios/flash.mk +++ b/platforms/chibios/flash.mk @@ -40,6 +40,18 @@ endef dfu-util: $(BUILD_DIR)/$(TARGET).bin cpfirmware sizeafter $(call EXEC_DFU_UTIL) +define EXEC_UF2_UTIL_DEPLOY + if ! $(UF2CONV) --deploy $(BUILD_DIR)/$(TARGET).uf2 2>/dev/null; then \ + printf "$(MSG_BOOTLOADER_NOT_FOUND_QUICK_RETRY)" ;\ + sleep $(BOOTLOADER_RETRY_TIME) ;\ + while ! $(UF2CONV) --deploy $(BUILD_DIR)/$(TARGET).uf2 2>/dev/null; do \ + printf "." ;\ + sleep $(BOOTLOADER_RETRY_TIME) ;\ + done ;\ + printf "\n" ;\ + fi +endef + # TODO: Remove once ARM has a way to configure EECONFIG_HANDEDNESS # within the emulated eeprom via dfu-util or another tool ifneq (,$(filter $(MAKECMDGOALS),dfu-util-split-left)) @@ -90,6 +102,8 @@ ifneq ($(strip $(PROGRAM_CMD)),) $(UNSYNC_OUTPUT_CMD) && $(PROGRAM_CMD) else ifeq ($(strip $(BOOTLOADER)),kiibohd) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_DFU_UTIL) +else ifeq ($(strip $(BOOTLOADER)),tinyuf2) + $(UNSYNC_OUTPUT_CMD) && $(call EXEC_UF2_UTIL_DEPLOY) else ifeq ($(strip $(MCU_FAMILY)),KINETIS) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_TEENSY) else ifeq ($(strip $(MCU_FAMILY)),MIMXRT1062) diff --git a/platforms/chibios/gpio.h b/platforms/chibios/gpio.h index eb44a18f9c..80551abac5 100644 --- a/platforms/chibios/gpio.h +++ b/platforms/chibios/gpio.h @@ -31,7 +31,14 @@ typedef ioline_t pin_t; #define writePinHigh(pin) palSetLine(pin) #define writePinLow(pin) palClearLine(pin) -#define writePin(pin, level) ((level) ? (writePinHigh(pin)) : (writePinLow(pin))) +#define writePin(pin, level) \ + do { \ + if (level) { \ + writePinHigh(pin); \ + } else { \ + writePinLow(pin); \ + } \ + } while (0) #define readPin(pin) palReadLine(pin) diff --git a/platforms/chibios/pin_defs.h b/platforms/chibios/pin_defs.h deleted file mode 100644 index c03f8de0c2..0000000000 --- a/platforms/chibios/pin_defs.h +++ /dev/null @@ -1,323 +0,0 @@ -/* Copyright 2021 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -// Defines mapping for Proton C replacement -#ifdef CONVERT_TO_PROTON_C -// Left side (front) -# define D3 PAL_LINE(GPIOA, 9) -# define D2 PAL_LINE(GPIOA, 10) -// GND -// GND -# define D1 PAL_LINE(GPIOB, 7) -# define D0 PAL_LINE(GPIOB, 6) -# define D4 PAL_LINE(GPIOB, 5) -# define C6 PAL_LINE(GPIOB, 4) -# define D7 PAL_LINE(GPIOB, 3) -# define E6 PAL_LINE(GPIOB, 2) -# define B4 PAL_LINE(GPIOB, 1) -# define B5 PAL_LINE(GPIOB, 0) - -// Right side (front) -// RAW -// GND -// RESET -// VCC -# define F4 PAL_LINE(GPIOA, 2) -# define F5 PAL_LINE(GPIOA, 1) -# define F6 PAL_LINE(GPIOA, 0) -# define F7 PAL_LINE(GPIOB, 8) -# define B1 PAL_LINE(GPIOB, 13) -# define B3 PAL_LINE(GPIOB, 14) -# define B2 PAL_LINE(GPIOB, 15) -# define B6 PAL_LINE(GPIOB, 9) - -// LEDs (only D5/C13 uses an actual LED) -# ifdef CONVERT_TO_PROTON_C_RXLED -# define D5 PAL_LINE(GPIOC, 14) -# define B0 PAL_LINE(GPIOC, 13) -# else -# define D5 PAL_LINE(GPIOC, 13) -# define B0 PAL_LINE(GPIOC, 14) -# endif -#else -# define A0 PAL_LINE(GPIOA, 0) -# define A1 PAL_LINE(GPIOA, 1) -# define A2 PAL_LINE(GPIOA, 2) -# define A3 PAL_LINE(GPIOA, 3) -# define A4 PAL_LINE(GPIOA, 4) -# define A5 PAL_LINE(GPIOA, 5) -# define A6 PAL_LINE(GPIOA, 6) -# define A7 PAL_LINE(GPIOA, 7) -# define A8 PAL_LINE(GPIOA, 8) -# define A9 PAL_LINE(GPIOA, 9) -# define A10 PAL_LINE(GPIOA, 10) -# define A11 PAL_LINE(GPIOA, 11) -# define A12 PAL_LINE(GPIOA, 12) -# define A13 PAL_LINE(GPIOA, 13) -# define A14 PAL_LINE(GPIOA, 14) -# define A15 PAL_LINE(GPIOA, 15) -# define A16 PAL_LINE(GPIOA, 16) -# define A17 PAL_LINE(GPIOA, 17) -# define A18 PAL_LINE(GPIOA, 18) -# define A19 PAL_LINE(GPIOA, 19) -# define A20 PAL_LINE(GPIOA, 20) -# define A21 PAL_LINE(GPIOA, 21) -# define A22 PAL_LINE(GPIOA, 22) -# define A23 PAL_LINE(GPIOA, 23) -# define A24 PAL_LINE(GPIOA, 24) -# define A25 PAL_LINE(GPIOA, 25) -# define A26 PAL_LINE(GPIOA, 26) -# define A27 PAL_LINE(GPIOA, 27) -# define A28 PAL_LINE(GPIOA, 28) -# define A29 PAL_LINE(GPIOA, 29) -# define A30 PAL_LINE(GPIOA, 30) -# define A31 PAL_LINE(GPIOA, 31) -# define A32 PAL_LINE(GPIOA, 32) -# define B0 PAL_LINE(GPIOB, 0) -# define B1 PAL_LINE(GPIOB, 1) -# define B2 PAL_LINE(GPIOB, 2) -# define B3 PAL_LINE(GPIOB, 3) -# define B4 PAL_LINE(GPIOB, 4) -# define B5 PAL_LINE(GPIOB, 5) -# define B6 PAL_LINE(GPIOB, 6) -# define B7 PAL_LINE(GPIOB, 7) -# define B8 PAL_LINE(GPIOB, 8) -# define B9 PAL_LINE(GPIOB, 9) -# define B10 PAL_LINE(GPIOB, 10) -# define B11 PAL_LINE(GPIOB, 11) -# define B12 PAL_LINE(GPIOB, 12) -# define B13 PAL_LINE(GPIOB, 13) -# define B14 PAL_LINE(GPIOB, 14) -# define B15 PAL_LINE(GPIOB, 15) -# define B16 PAL_LINE(GPIOB, 16) -# define B17 PAL_LINE(GPIOB, 17) -# define B18 PAL_LINE(GPIOB, 18) -# define B19 PAL_LINE(GPIOB, 19) -# define B20 PAL_LINE(GPIOB, 20) -# define B21 PAL_LINE(GPIOB, 21) -# define B22 PAL_LINE(GPIOB, 22) -# define B23 PAL_LINE(GPIOB, 23) -# define B24 PAL_LINE(GPIOB, 24) -# define B25 PAL_LINE(GPIOB, 25) -# define B26 PAL_LINE(GPIOB, 26) -# define B27 PAL_LINE(GPIOB, 27) -# define B28 PAL_LINE(GPIOB, 28) -# define B29 PAL_LINE(GPIOB, 29) -# define B30 PAL_LINE(GPIOB, 30) -# define B31 PAL_LINE(GPIOB, 31) -# define B32 PAL_LINE(GPIOB, 32) -# define C0 PAL_LINE(GPIOC, 0) -# define C1 PAL_LINE(GPIOC, 1) -# define C2 PAL_LINE(GPIOC, 2) -# define C3 PAL_LINE(GPIOC, 3) -# define C4 PAL_LINE(GPIOC, 4) -# define C5 PAL_LINE(GPIOC, 5) -# define C6 PAL_LINE(GPIOC, 6) -# define C7 PAL_LINE(GPIOC, 7) -# define C8 PAL_LINE(GPIOC, 8) -# define C9 PAL_LINE(GPIOC, 9) -# define C10 PAL_LINE(GPIOC, 10) -# define C11 PAL_LINE(GPIOC, 11) -# define C12 PAL_LINE(GPIOC, 12) -# define C13 PAL_LINE(GPIOC, 13) -# define C14 PAL_LINE(GPIOC, 14) -# define C15 PAL_LINE(GPIOC, 15) -# define C16 PAL_LINE(GPIOC, 16) -# define C17 PAL_LINE(GPIOC, 17) -# define C18 PAL_LINE(GPIOC, 18) -# define C19 PAL_LINE(GPIOC, 19) -# define C20 PAL_LINE(GPIOC, 20) -# define C21 PAL_LINE(GPIOC, 21) -# define C22 PAL_LINE(GPIOC, 22) -# define C23 PAL_LINE(GPIOC, 23) -# define C24 PAL_LINE(GPIOC, 24) -# define C25 PAL_LINE(GPIOC, 25) -# define C26 PAL_LINE(GPIOC, 26) -# define C27 PAL_LINE(GPIOC, 27) -# define C28 PAL_LINE(GPIOC, 28) -# define C29 PAL_LINE(GPIOC, 29) -# define C30 PAL_LINE(GPIOC, 30) -# define C31 PAL_LINE(GPIOC, 31) -# define C32 PAL_LINE(GPIOC, 32) -# define D0 PAL_LINE(GPIOD, 0) -# define D1 PAL_LINE(GPIOD, 1) -# define D2 PAL_LINE(GPIOD, 2) -# define D3 PAL_LINE(GPIOD, 3) -# define D4 PAL_LINE(GPIOD, 4) -# define D5 PAL_LINE(GPIOD, 5) -# define D6 PAL_LINE(GPIOD, 6) -# define D7 PAL_LINE(GPIOD, 7) -# define D8 PAL_LINE(GPIOD, 8) -# define D9 PAL_LINE(GPIOD, 9) -# define D10 PAL_LINE(GPIOD, 10) -# define D11 PAL_LINE(GPIOD, 11) -# define D12 PAL_LINE(GPIOD, 12) -# define D13 PAL_LINE(GPIOD, 13) -# define D14 PAL_LINE(GPIOD, 14) -# define D15 PAL_LINE(GPIOD, 15) -# define D16 PAL_LINE(GPIOD, 16) -# define D17 PAL_LINE(GPIOD, 17) -# define D18 PAL_LINE(GPIOD, 18) -# define D19 PAL_LINE(GPIOD, 19) -# define D20 PAL_LINE(GPIOD, 20) -# define D21 PAL_LINE(GPIOD, 21) -# define D22 PAL_LINE(GPIOD, 22) -# define D23 PAL_LINE(GPIOD, 23) -# define D24 PAL_LINE(GPIOD, 24) -# define D25 PAL_LINE(GPIOD, 25) -# define D26 PAL_LINE(GPIOD, 26) -# define D27 PAL_LINE(GPIOD, 27) -# define D28 PAL_LINE(GPIOD, 28) -# define D29 PAL_LINE(GPIOD, 29) -# define D30 PAL_LINE(GPIOD, 30) -# define D31 PAL_LINE(GPIOD, 31) -# define D32 PAL_LINE(GPIOD, 32) -# define E0 PAL_LINE(GPIOE, 0) -# define E1 PAL_LINE(GPIOE, 1) -# define E2 PAL_LINE(GPIOE, 2) -# define E3 PAL_LINE(GPIOE, 3) -# define E4 PAL_LINE(GPIOE, 4) -# define E5 PAL_LINE(GPIOE, 5) -# define E6 PAL_LINE(GPIOE, 6) -# define E7 PAL_LINE(GPIOE, 7) -# define E8 PAL_LINE(GPIOE, 8) -# define E9 PAL_LINE(GPIOE, 9) -# define E10 PAL_LINE(GPIOE, 10) -# define E11 PAL_LINE(GPIOE, 11) -# define E12 PAL_LINE(GPIOE, 12) -# define E13 PAL_LINE(GPIOE, 13) -# define E14 PAL_LINE(GPIOE, 14) -# define E15 PAL_LINE(GPIOE, 15) -# define E16 PAL_LINE(GPIOE, 16) -# define E17 PAL_LINE(GPIOE, 17) -# define E18 PAL_LINE(GPIOE, 18) -# define E19 PAL_LINE(GPIOE, 19) -# define E20 PAL_LINE(GPIOE, 20) -# define E21 PAL_LINE(GPIOE, 21) -# define E22 PAL_LINE(GPIOE, 22) -# define E23 PAL_LINE(GPIOE, 23) -# define E24 PAL_LINE(GPIOE, 24) -# define E25 PAL_LINE(GPIOE, 25) -# define E26 PAL_LINE(GPIOE, 26) -# define E27 PAL_LINE(GPIOE, 27) -# define E28 PAL_LINE(GPIOE, 28) -# define E29 PAL_LINE(GPIOE, 29) -# define E30 PAL_LINE(GPIOE, 30) -# define E31 PAL_LINE(GPIOE, 31) -# define E32 PAL_LINE(GPIOE, 32) -# define F0 PAL_LINE(GPIOF, 0) -# define F1 PAL_LINE(GPIOF, 1) -# define F2 PAL_LINE(GPIOF, 2) -# define F3 PAL_LINE(GPIOF, 3) -# define F4 PAL_LINE(GPIOF, 4) -# define F5 PAL_LINE(GPIOF, 5) -# define F6 PAL_LINE(GPIOF, 6) -# define F7 PAL_LINE(GPIOF, 7) -# define F8 PAL_LINE(GPIOF, 8) -# define F9 PAL_LINE(GPIOF, 9) -# define F10 PAL_LINE(GPIOF, 10) -# define F11 PAL_LINE(GPIOF, 11) -# define F12 PAL_LINE(GPIOF, 12) -# define F13 PAL_LINE(GPIOF, 13) -# define F14 PAL_LINE(GPIOF, 14) -# define F15 PAL_LINE(GPIOF, 15) -# define G0 PAL_LINE(GPIOG, 0) -# define G1 PAL_LINE(GPIOG, 1) -# define G2 PAL_LINE(GPIOG, 2) -# define G3 PAL_LINE(GPIOG, 3) -# define G4 PAL_LINE(GPIOG, 4) -# define G5 PAL_LINE(GPIOG, 5) -# define G6 PAL_LINE(GPIOG, 6) -# define G7 PAL_LINE(GPIOG, 7) -# define G8 PAL_LINE(GPIOG, 8) -# define G9 PAL_LINE(GPIOG, 9) -# define G10 PAL_LINE(GPIOG, 10) -# define G11 PAL_LINE(GPIOG, 11) -# define G12 PAL_LINE(GPIOG, 12) -# define G13 PAL_LINE(GPIOG, 13) -# define G14 PAL_LINE(GPIOG, 14) -# define G15 PAL_LINE(GPIOG, 15) -# define H0 PAL_LINE(GPIOH, 0) -# define H1 PAL_LINE(GPIOH, 1) -# define H2 PAL_LINE(GPIOH, 2) -# define H3 PAL_LINE(GPIOH, 3) -# define H4 PAL_LINE(GPIOH, 4) -# define H5 PAL_LINE(GPIOH, 5) -# define H6 PAL_LINE(GPIOH, 6) -# define H7 PAL_LINE(GPIOH, 7) -# define H8 PAL_LINE(GPIOH, 8) -# define H9 PAL_LINE(GPIOH, 9) -# define H10 PAL_LINE(GPIOH, 10) -# define H11 PAL_LINE(GPIOH, 11) -# define H12 PAL_LINE(GPIOH, 12) -# define H13 PAL_LINE(GPIOH, 13) -# define H14 PAL_LINE(GPIOH, 14) -# define H15 PAL_LINE(GPIOH, 15) -# define I0 PAL_LINE(GPIOI, 0) -# define I1 PAL_LINE(GPIOI, 1) -# define I2 PAL_LINE(GPIOI, 2) -# define I3 PAL_LINE(GPIOI, 3) -# define I4 PAL_LINE(GPIOI, 4) -# define I5 PAL_LINE(GPIOI, 5) -# define I6 PAL_LINE(GPIOI, 6) -# define I7 PAL_LINE(GPIOI, 7) -# define I8 PAL_LINE(GPIOI, 8) -# define I9 PAL_LINE(GPIOI, 9) -# define I10 PAL_LINE(GPIOI, 10) -# define I11 PAL_LINE(GPIOI, 11) -# define I12 PAL_LINE(GPIOI, 12) -# define I13 PAL_LINE(GPIOI, 13) -# define I14 PAL_LINE(GPIOI, 14) -# define I15 PAL_LINE(GPIOI, 15) -# define J0 PAL_LINE(GPIOJ, 0) -# define J1 PAL_LINE(GPIOJ, 1) -# define J2 PAL_LINE(GPIOJ, 2) -# define J3 PAL_LINE(GPIOJ, 3) -# define J4 PAL_LINE(GPIOJ, 4) -# define J5 PAL_LINE(GPIOJ, 5) -# define J6 PAL_LINE(GPIOJ, 6) -# define J7 PAL_LINE(GPIOJ, 7) -# define J8 PAL_LINE(GPIOJ, 8) -# define J9 PAL_LINE(GPIOJ, 9) -# define J10 PAL_LINE(GPIOJ, 10) -# define J11 PAL_LINE(GPIOJ, 11) -# define J12 PAL_LINE(GPIOJ, 12) -# define J13 PAL_LINE(GPIOJ, 13) -# define J14 PAL_LINE(GPIOJ, 14) -# define J15 PAL_LINE(GPIOJ, 15) -// Keyboards can `#define KEYBOARD_REQUIRES_GPIOK` if they need to access GPIO-K pins. These conflict with a whole -// bunch of layout definitions, so it's intentionally left out unless absolutely required -- in that case, the -// keyboard designer should use a different symbol when defining their layout macros. -# ifdef KEYBOARD_REQUIRES_GPIOK -# define K0 PAL_LINE(GPIOK, 0) -# define K1 PAL_LINE(GPIOK, 1) -# define K2 PAL_LINE(GPIOK, 2) -# define K3 PAL_LINE(GPIOK, 3) -# define K4 PAL_LINE(GPIOK, 4) -# define K5 PAL_LINE(GPIOK, 5) -# define K6 PAL_LINE(GPIOK, 6) -# define K7 PAL_LINE(GPIOK, 7) -# define K8 PAL_LINE(GPIOK, 8) -# define K9 PAL_LINE(GPIOK, 9) -# define K10 PAL_LINE(GPIOK, 10) -# define K11 PAL_LINE(GPIOK, 11) -# define K12 PAL_LINE(GPIOK, 12) -# define K13 PAL_LINE(GPIOK, 13) -# define K14 PAL_LINE(GPIOK, 14) -# define K15 PAL_LINE(GPIOK, 15) -# endif -#endif diff --git a/platforms/chibios/platform.mk b/platforms/chibios/platform.mk index 6fd1fd83f5..91dd0479bc 100644 --- a/platforms/chibios/platform.mk +++ b/platforms/chibios/platform.mk @@ -39,7 +39,6 @@ ifeq ($(strip $(MCU)), risc-v) STARTUP_MK = $(CHIBIOS_CONTRIB)/os/common/startup/RISCV-ECLIC/compilers/GCC/mk/startup_$(MCU_STARTUP).mk PORT_V = $(CHIBIOS_CONTRIB)/os/common/ports/RISCV-ECLIC/compilers/GCC/mk/port.mk RULESPATH = $(CHIBIOS_CONTRIB)/os/common/startup/RISCV-ECLIC/compilers/GCC - PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/GD/GD32VF103/platform.mk else # ARM Support CHIBIOS_PORT ?= @@ -82,10 +81,15 @@ ifeq ("$(PLATFORM_NAME)","") PLATFORM_NAME = platform endif +# If no MCU port name was specified, use the family instead +ifeq ("$(MCU_PORT_NAME)","") + MCU_PORT_NAME = $(MCU_FAMILY) +endif + ifeq ("$(wildcard $(PLATFORM_MK))","") - PLATFORM_MK = $(CHIBIOS)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk + PLATFORM_MK = $(CHIBIOS)/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)/$(PLATFORM_NAME).mk ifeq ("$(wildcard $(PLATFORM_MK))","") - PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk + PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)/$(PLATFORM_NAME).mk endif endif diff --git a/platforms/chibios/timer.c b/platforms/chibios/timer.c index e3bdfdcc37..5e01ea6372 100644 --- a/platforms/chibios/timer.c +++ b/platforms/chibios/timer.c @@ -40,7 +40,7 @@ static virtual_timer_t update_timer; # define UPDATE_INTERVAL (((sysinterval_t)1) << (CH_CFG_ST_RESOLUTION - 1)) // VT callback function to keep the overflow bits of the system tick counter updated. -static void update_fn(void *arg) { +static void update_fn(struct ch_virtual_timer *timer, void *arg) { (void)arg; chSysLockFromISR(); get_system_time_ticks(); diff --git a/platforms/chibios/wait.c b/platforms/chibios/wait.c index 56fd6ffcec..88cb5e6d54 100644 --- a/platforms/chibios/wait.c +++ b/platforms/chibios/wait.c @@ -31,7 +31,7 @@ void wait_us(uint16_t duration) { * Only use this timer on the main thread; * other threads need to use their own timer. */ - if (chThdGetSelfX() == &ch.mainthread && duration < (1ULL << (sizeof(gptcnt_t) * 8))) { + if (chThdGetSelfX() == &(currcore->mainthread) && duration < (1ULL << (sizeof(gptcnt_t) * 8))) { gptStart(&WAIT_US_TIMER, &gpt_cfg); gptPolledDelay(&WAIT_US_TIMER, duration); } else { diff --git a/platforms/pin_defs.h b/platforms/pin_defs.h index ea730138f2..341fe89b6e 100644 --- a/platforms/pin_defs.h +++ b/platforms/pin_defs.h @@ -18,6 +18,6 @@ // useful for direct pin mapping #define NO_PIN (pin_t)(~0) -#if __has_include_next("pin_defs.h") -# include_next "pin_defs.h" /* Include the platforms pin_defs.h */ +#if __has_include("_pin_defs.h") +# include "_pin_defs.h" /* Include the platforms pin defs */ #endif |