summaryrefslogtreecommitdiff
path: root/platforms
diff options
context:
space:
mode:
Diffstat (limited to 'platforms')
-rw-r--r--platforms/arm_atsam/bootloaders/md_boot.c (renamed from platforms/arm_atsam/bootloader.c)38
-rw-r--r--platforms/arm_atsam/eeprom_samd.c (renamed from platforms/arm_atsam/eeprom.c)6
-rwxr-xr-xplatforms/arm_atsam/eeprom_samd.h8
-rw-r--r--platforms/arm_atsam/gpio.h12
-rw-r--r--platforms/arm_atsam/suspend.c43
-rw-r--r--platforms/avr/bootloader.c293
-rw-r--r--platforms/avr/bootloaders/bootloadhid.c33
-rw-r--r--platforms/avr/bootloaders/caterina.c39
-rw-r--r--platforms/avr/bootloaders/custom.c (renamed from platforms/chibios/boards/GENERIC_STM32_G431XB/configs/config.h)14
-rw-r--r--platforms/avr/bootloaders/dfu.c52
-rw-r--r--platforms/avr/bootloaders/halfkay.c128
-rw-r--r--platforms/avr/bootloaders/usbasploader.c56
-rw-r--r--platforms/avr/drivers/i2c_master.c7
-rw-r--r--platforms/avr/drivers/serial.c46
-rw-r--r--platforms/avr/gpio.h17
-rw-r--r--platforms/avr/platform.mk2
-rw-r--r--platforms/avr/suspend.c55
-rw-r--r--platforms/chibios/boards/BLACKPILL_STM32_F401/configs/bootloader_defs.h5
-rw-r--r--platforms/chibios/boards/BLACKPILL_STM32_F411/configs/bootloader_defs.h5
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F042X6/configs/bootloader_defs.h5
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F072XB/configs/bootloader_defs.h5
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F303XC/configs/bootloader_defs.h5
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h2
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F407XE/configs/config.h2
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_F446XE/configs/config.h2
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h1
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_L432XC/board/board.mk9
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h10
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h267
-rw-r--r--platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h1
-rw-r--r--platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/bootloader_defs.h12
-rw-r--r--platforms/chibios/boards/QMK_PROTON_C/configs/bootloader_defs.h7
-rw-r--r--platforms/chibios/bootloader.c145
-rw-r--r--platforms/chibios/bootloaders/custom.c21
-rw-r--r--platforms/chibios/bootloaders/gd32v_dfu.c40
-rw-r--r--platforms/chibios/bootloaders/halfkay.c25
-rw-r--r--platforms/chibios/bootloaders/kiibohd.c32
-rw-r--r--platforms/chibios/bootloaders/stm32_dfu.c94
-rw-r--r--platforms/chibios/bootloaders/stm32duino.c21
-rw-r--r--platforms/chibios/bootloaders/tinyuf2.c34
-rw-r--r--platforms/chibios/drivers/i2c_master.c59
-rw-r--r--platforms/chibios/drivers/i2c_master.h61
-rw-r--r--platforms/chibios/drivers/serial.c19
-rw-r--r--platforms/chibios/drivers/serial_usart.c32
-rw-r--r--platforms/chibios/eeprom_stm32.c66
-rw-r--r--platforms/chibios/eeprom_stm32_defs.h62
-rw-r--r--platforms/chibios/eeprom_teensy.c74
-rwxr-xr-xplatforms/chibios/eeprom_teensy.h25
-rw-r--r--platforms/chibios/gpio.h24
-rw-r--r--platforms/chibios/platform.mk2
-rw-r--r--platforms/chibios/suspend.c37
-rw-r--r--platforms/chibios/timer.c100
-rw-r--r--platforms/common.mk3
-rw-r--r--platforms/eeprom.h49
-rw-r--r--platforms/suspend.c47
-rw-r--r--platforms/suspend.h1
-rw-r--r--platforms/test/bootloaders/none.c (renamed from platforms/test/bootloader.c)0
-rw-r--r--platforms/test/eeprom.c4
-rw-r--r--platforms/test/eeprom_stm32_tests.cpp3
-rw-r--r--platforms/test/eeprom_stm32_tests.h8
-rw-r--r--platforms/test/rules.mk2
61 files changed, 1298 insertions, 979 deletions
diff --git a/platforms/arm_atsam/bootloader.c b/platforms/arm_atsam/bootloaders/md_boot.c
index 9015b00aab..9cf16f3597 100644
--- a/platforms/arm_atsam/bootloader.c
+++ b/platforms/arm_atsam/bootloaders/md_boot.c
@@ -15,13 +15,17 @@
*/
#include "bootloader.h"
+
#include "samd51j18a.h"
-#include "md_bootloader.h"
-// Set watchdog timer to reset. Directs the bootloader to stay in programming mode.
+// WARNING: These are only for CTRL bootloader release "v2.18Jun 22 2018 17:28:08" for bootloader_jump support
+extern uint32_t _eram;
+#define BOOTLOADER_MAGIC 0x3B9ACA00
+#define MAGIC_ADDR (uint32_t *)((intptr_t)(&_eram) - 4)
+
+// CTRL keyboards released with bootloader version below must use RAM method. Otherwise use WDT method.
void bootloader_jump(void) {
#ifdef KEYBOARD_massdrop_ctrl
- // CTRL keyboards released with bootloader version below must use RAM method. Otherwise use WDT method.
uint8_t ver_ram_method[] = "v2.18Jun 22 2018 17:28:08"; // The version to match (NULL terminated by compiler)
uint8_t *ver_check = ver_ram_method; // Pointer to version match string for traversal
uint8_t *ver_rom = (uint8_t *)0x21A0; // Pointer to address in ROM where this specific bootloader version would exist
@@ -34,24 +38,28 @@ void bootloader_jump(void) {
if (!*ver_check) { // If check version pointer is NULL, all characters have matched
*MAGIC_ADDR = BOOTLOADER_MAGIC; // Set magic number into RAM
NVIC_SystemReset(); // Perform system reset
- while (1) {
- } // Won't get here
+ while (1)
+ ; // Won't get here
}
#endif
+ // Set watchdog timer to reset. Directs the bootloader to stay in programming mode.
WDT->CTRLA.bit.ENABLE = 0;
- while (WDT->SYNCBUSY.bit.ENABLE) {
- }
- while (WDT->CTRLA.bit.ENABLE) {
- }
+
+ while (WDT->SYNCBUSY.bit.ENABLE)
+ ;
+ while (WDT->CTRLA.bit.ENABLE)
+ ;
+
WDT->CONFIG.bit.WINDOW = 0;
WDT->CONFIG.bit.PER = 0;
WDT->EWCTRL.bit.EWOFFSET = 0;
WDT->CTRLA.bit.ENABLE = 1;
- while (WDT->SYNCBUSY.bit.ENABLE) {
- }
- while (!WDT->CTRLA.bit.ENABLE) {
- }
- while (1) {
- } // Wait on timeout
+
+ while (WDT->SYNCBUSY.bit.ENABLE)
+ ;
+ while (!WDT->CTRLA.bit.ENABLE)
+ ;
+ while (1)
+ ; // Wait on timeout
}
diff --git a/platforms/arm_atsam/eeprom.c b/platforms/arm_atsam/eeprom_samd.c
index ff1a692623..beaffeec30 100644
--- a/platforms/arm_atsam/eeprom.c
+++ b/platforms/arm_atsam/eeprom_samd.c
@@ -18,11 +18,7 @@
#include "samd51j18a.h"
#include "core_cm4.h"
#include "component/nvmctrl.h"
-
-#ifndef EEPROM_SIZE
-# include "eeconfig.h"
-# define EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4) // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO
-#endif
+#include "eeprom_samd.h"
#ifndef MAX
# define MAX(X, Y) ((X) > (Y) ? (X) : (Y))
diff --git a/platforms/arm_atsam/eeprom_samd.h b/platforms/arm_atsam/eeprom_samd.h
new file mode 100755
index 0000000000..7dbff9bfa1
--- /dev/null
+++ b/platforms/arm_atsam/eeprom_samd.h
@@ -0,0 +1,8 @@
+// Copyright 2022 Nick Brassel (@tzarc)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#ifndef EEPROM_SIZE
+# include "eeconfig.h"
+# define EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4) // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO
+#endif
diff --git a/platforms/arm_atsam/gpio.h b/platforms/arm_atsam/gpio.h
index 915ed0ef4f..a42aaff54d 100644
--- a/platforms/arm_atsam/gpio.h
+++ b/platforms/arm_atsam/gpio.h
@@ -22,9 +22,9 @@
typedef uint8_t pin_t;
-#define SAMD_PORT(pin) ((pin & 0x20) >> 5)
-#define SAMD_PIN(pin) (pin & 0x1f)
-#define SAMD_PIN_MASK(pin) (1 << (pin & 0x1f))
+#define SAMD_PORT(pin) (((pin)&0x20) >> 5)
+#define SAMD_PIN(pin) ((pin)&0x1f)
+#define SAMD_PIN_MASK(pin) (1 << ((pin)&0x1f))
#define setPinInput(pin) \
do { \
@@ -48,12 +48,16 @@ typedef uint8_t pin_t;
PORT->Group[SAMD_PORT(pin)].PINCFG[SAMD_PIN(pin)].bit.PULLEN = 1; \
} while (0)
-#define setPinOutput(pin) \
+#define setPinOutputPushPull(pin) \
do { \
PORT->Group[SAMD_PORT(pin)].DIRSET.reg = SAMD_PIN_MASK(pin); \
PORT->Group[SAMD_PORT(pin)].OUTCLR.reg = SAMD_PIN_MASK(pin); \
} while (0)
+#define setPinOutputOpenDrain(pin) _Static_assert(0, "arm_atsam platform does not implement an open-drain output")
+
+#define setPinOutput(pin) setPinOutputPushPull(pin)
+
#define writePinHigh(pin) \
do { \
PORT->Group[SAMD_PORT(pin)].OUTSET.reg = SAMD_PIN_MASK(pin); \
diff --git a/platforms/arm_atsam/suspend.c b/platforms/arm_atsam/suspend.c
index e51426128d..de2285bc5f 100644
--- a/platforms/arm_atsam/suspend.c
+++ b/platforms/arm_atsam/suspend.c
@@ -3,25 +3,6 @@
#include "md_rgb_matrix.h"
#include "suspend.h"
-/** \brief Suspend idle
- *
- * FIXME: needs doc
- */
-void suspend_idle(uint8_t time) { /* Note: Not used anywhere currently */
-}
-
-/** \brief Run user level Power down
- *
- * FIXME: needs doc
- */
-__attribute__((weak)) void suspend_power_down_user(void) {}
-
-/** \brief Run keyboard level Power down
- *
- * FIXME: needs doc
- */
-__attribute__((weak)) void suspend_power_down_kb(void) { suspend_power_down_user(); }
-
/** \brief Suspend power down
*
* FIXME: needs doc
@@ -34,30 +15,6 @@ void suspend_power_down(void) {
suspend_power_down_kb();
}
-__attribute__((weak)) void matrix_power_up(void) {}
-__attribute__((weak)) void matrix_power_down(void) {}
-bool suspend_wakeup_condition(void) {
- matrix_power_up();
- matrix_scan();
- matrix_power_down();
- for (uint8_t r = 0; r < MATRIX_ROWS; r++) {
- if (matrix_get_row(r)) return true;
- }
- return false;
-}
-
-/** \brief run user level code immediately after wakeup
- *
- * FIXME: needs doc
- */
-__attribute__((weak)) void suspend_wakeup_init_user(void) {}
-
-/** \brief run keyboard level code immediately after wakeup
- *
- * FIXME: needs doc
- */
-__attribute__((weak)) void suspend_wakeup_init_kb(void) { suspend_wakeup_init_user(); }
-
/** \brief run immediately after wakeup
*
* FIXME: needs doc
diff --git a/platforms/avr/bootloader.c b/platforms/avr/bootloader.c
deleted file mode 100644
index c0272903b8..0000000000
--- a/platforms/avr/bootloader.c
+++ /dev/null
@@ -1,293 +0,0 @@
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/eeprom.h>
-#include <avr/interrupt.h>
-#include <avr/wdt.h>
-#include <util/delay.h>
-#include "bootloader.h"
-#include <avr/boot.h>
-
-#ifdef PROTOCOL_LUFA
-# include <LUFA/Drivers/USB/USB.h>
-#endif
-
-/** \brief Bootloader Size in *bytes*
- *
- * AVR Boot section size are defined by setting BOOTSZ fuse in fact. Consult with your MCU datasheet.
- * Note that 'Word'(2 bytes) size and address are used in datasheet while TMK uses 'Byte'.
- *
- * Size of Bootloaders in bytes:
- * Atmel DFU loader(ATmega32U4) 4096
- * Atmel DFU loader(AT90USB128) 8192
- * LUFA bootloader(ATmega32U4) 4096
- * Arduino Caterina(ATmega32U4) 4096
- * USBaspLoader(ATmega***) 2048
- * Teensy halfKay(ATmega32U4) 512
- * Teensy++ halfKay(AT90USB128) 1024
- *
- * AVR Boot section is located at the end of Flash memory like the followings.
- *
- * byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB128)
- * 0x0000 +---------------+ 0x00000 +---------------+
- * | | | |
- * | | | |
- * | Application | | Application |
- * | | | |
- * = = = =
- * | | 32KB-4KB | | 128KB-8KB
- * 0x7000 +---------------+ 0x1E000 +---------------+
- * | Bootloader | 4KB | Bootloader | 8KB
- * 0x7FFF +---------------+ 0x1FFFF +---------------+
- *
- *
- * byte Teensy(ATMega32u4) byte Teensy++(AT90SUB128)
- * 0x0000 +---------------+ 0x00000 +---------------+
- * | | | |
- * | | | |
- * | Application | | Application |
- * | | | |
- * = = = =
- * | | 32KB-512B | | 128KB-1KB
- * 0x7E00 +---------------+ 0x1FC00 +---------------+
- * | Bootloader | 512B | Bootloader | 1KB
- * 0x7FFF +---------------+ 0x1FFFF +---------------+
- */
-#define FLASH_SIZE (FLASHEND + 1L)
-
-#if !defined(BOOTLOADER_SIZE)
-uint16_t bootloader_start;
-#endif
-
-// compatibility between ATMega8 and ATMega88
-#if !defined(MCUCSR)
-# if defined(MCUSR)
-# define MCUCSR MCUSR
-# endif
-#endif
-
-/** \brief Entering the Bootloader via Software
- *
- * http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html
- */
-#define BOOTLOADER_RESET_KEY 0xB007B007
-uint32_t reset_key __attribute__((section(".noinit,\"aw\",@nobits;")));
-
-/** \brief initialize MCU status by watchdog reset
- *
- * FIXME: needs doc
- */
-__attribute__((weak)) void bootloader_jump(void) {
-#if !defined(BOOTLOADER_SIZE)
- uint8_t high_fuse = boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS);
-
- if (high_fuse & ~(FUSE_BOOTSZ0 & FUSE_BOOTSZ1)) {
- bootloader_start = (FLASH_SIZE - 512) >> 1;
- } else if (high_fuse & ~(FUSE_BOOTSZ1)) {
- bootloader_start = (FLASH_SIZE - 1024) >> 1;
- } else if (high_fuse & ~(FUSE_BOOTSZ0)) {
- bootloader_start = (FLASH_SIZE - 2048) >> 1;
- } else {
- bootloader_start = (FLASH_SIZE - 4096) >> 1;
- }
-#endif
-
- // Something like this might work, but it compiled larger than the block above
- // bootloader_start = FLASH_SIZE - (256 << (~high_fuse & 0b110 >> 1));
-
-#if defined(BOOTLOADER_HALFKAY)
- // http://www.pjrc.com/teensy/jump_to_bootloader.html
- cli();
- // disable watchdog, if enabled (it's not)
- // disable all peripherals
- // a shutdown call might make sense here
- UDCON = 1;
- USBCON = (1 << FRZCLK); // disable USB
- UCSR1B = 0;
- _delay_ms(5);
-# if defined(__AVR_AT90USB162__) // Teensy 1.0
- EIMSK = 0;
- PCICR = 0;
- SPCR = 0;
- ACSR = 0;
- EECR = 0;
- TIMSK0 = 0;
- TIMSK1 = 0;
- UCSR1B = 0;
- DDRB = 0;
- DDRC = 0;
- DDRD = 0;
- PORTB = 0;
- PORTC = 0;
- PORTD = 0;
- asm volatile("jmp 0x3E00");
-# elif defined(__AVR_ATmega32U4__) // Teensy 2.0
- EIMSK = 0;
- PCICR = 0;
- SPCR = 0;
- ACSR = 0;
- EECR = 0;
- ADCSRA = 0;
- TIMSK0 = 0;
- TIMSK1 = 0;
- TIMSK3 = 0;
- TIMSK4 = 0;
- UCSR1B = 0;
- TWCR = 0;
- DDRB = 0;
- DDRC = 0;
- DDRD = 0;
- DDRE = 0;
- DDRF = 0;
- TWCR = 0;
- PORTB = 0;
- PORTC = 0;
- PORTD = 0;
- PORTE = 0;
- PORTF = 0;
- asm volatile("jmp 0x7E00");
-# elif defined(__AVR_AT90USB646__) // Teensy++ 1.0
- EIMSK = 0;
- PCICR = 0;
- SPCR = 0;
- ACSR = 0;
- EECR = 0;
- ADCSRA = 0;
- TIMSK0 = 0;
- TIMSK1 = 0;
- TIMSK2 = 0;
- TIMSK3 = 0;
- UCSR1B = 0;
- TWCR = 0;
- DDRA = 0;
- DDRB = 0;
- DDRC = 0;
- DDRD = 0;
- DDRE = 0;
- DDRF = 0;
- PORTA = 0;
- PORTB = 0;
- PORTC = 0;
- PORTD = 0;
- PORTE = 0;
- PORTF = 0;
- asm volatile("jmp 0xFC00");
-# elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0
- EIMSK = 0;
- PCICR = 0;
- SPCR = 0;
- ACSR = 0;
- EECR = 0;
- ADCSRA = 0;
- TIMSK0 = 0;
- TIMSK1 = 0;
- TIMSK2 = 0;
- TIMSK3 = 0;
- UCSR1B = 0;
- TWCR = 0;
- DDRA = 0;
- DDRB = 0;
- DDRC = 0;
- DDRD = 0;
- DDRE = 0;
- DDRF = 0;
- PORTA = 0;
- PORTB = 0;
- PORTC = 0;
- PORTD = 0;
- PORTE = 0;
- PORTF = 0;
- asm volatile("jmp 0x1FC00");
-# endif
-
-#elif defined(BOOTLOADER_CATERINA)
- // this block may be optional
- // TODO: figure it out
-
- uint16_t *const bootKeyPtr = (uint16_t *)0x0800;
-
- // Value used by Caterina bootloader use to determine whether to run the
- // sketch or the bootloader programmer.
- uint16_t bootKey = 0x7777;
-
- *bootKeyPtr = bootKey;
-
- // setup watchdog timeout
- wdt_enable(WDTO_60MS);
-
- while (1) {
- } // wait for watchdog timer to trigger
-
-#elif defined(BOOTLOADER_USBASP)
- // Taken with permission of Stephan Baerwolf from https://github.com/tinyusbboard/API/blob/master/apipage.c
- wdt_enable(WDTO_15MS);
- wdt_reset();
- asm volatile("cli \n\t"
- "ldi r29 , %[ramendhi] \n\t"
- "ldi r28 , %[ramendlo] \n\t"
-# if (FLASHEND > 131071)
- "ldi r18 , %[bootaddrhi] \n\t"
- "st Y+, r18 \n\t"
-# endif
- "ldi r18 , %[bootaddrme] \n\t"
- "st Y+, r18 \n\t"
- "ldi r18 , %[bootaddrlo] \n\t"
- "st Y+, r18 \n\t"
- "out %[mcucsrio], __zero_reg__ \n\t"
- "bootloader_startup_loop%=: \n\t"
- "rjmp bootloader_startup_loop%= \n\t"
- :
- : [mcucsrio] "I"(_SFR_IO_ADDR(MCUCSR)),
-# if (FLASHEND > 131071)
- [ramendhi] "M"(((RAMEND - 2) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 2) >> 0) & 0xff), [bootaddrhi] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 16) & 0xff),
-# else
- [ramendhi] "M"(((RAMEND - 1) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 1) >> 0) & 0xff),
-# endif
- [bootaddrme] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 8) & 0xff), [bootaddrlo] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 0) & 0xff));
-
-#else // Assume remaining boards are DFU, even if the flag isn't set
-
-# if !(defined(__AVR_ATmega32A__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) || defined(__AVR_ATtiny85__)) // no USB - maybe BOOTLOADER_BOOTLOADHID instead though?
- UDCON = 1;
- USBCON = (1 << FRZCLK); // disable USB
- UCSR1B = 0;
- _delay_ms(5); // 5 seems to work fine
-# endif
-
-# ifdef BOOTLOADER_BOOTLOADHID
- // force bootloadHID to stay in bootloader mode, so that it waits
- // for a new firmware to be flashed
- eeprom_write_byte((uint8_t *)1, 0x00);
-# endif
-
- // watchdog reset
- reset_key = BOOTLOADER_RESET_KEY;
- wdt_enable(WDTO_250MS);
- for (;;)
- ;
-#endif
-}
-
-/* this runs before main() */
-void bootloader_jump_after_watchdog_reset(void) __attribute__((used, naked, section(".init3")));
-void bootloader_jump_after_watchdog_reset(void) {
-#ifndef BOOTLOADER_HALFKAY
- if ((MCUCSR & (1 << WDRF)) && reset_key == BOOTLOADER_RESET_KEY) {
- reset_key = 0;
-
- // My custom USBasploader requires this to come up.
- MCUCSR = 0;
-
- // Seems like Teensy halfkay loader requires clearing WDRF and disabling watchdog.
- MCUCSR &= ~(1 << WDRF);
- wdt_disable();
-
-// This is compled into 'icall', address should be in word unit, not byte.
-# ifdef BOOTLOADER_SIZE
- ((void (*)(void))((FLASH_SIZE - BOOTLOADER_SIZE) >> 1))();
-# else
- asm("ijmp" ::"z"(bootloader_start));
-# endif
- }
-#endif
-}
diff --git a/platforms/avr/bootloaders/bootloadhid.c b/platforms/avr/bootloaders/bootloadhid.c
new file mode 100644
index 0000000000..ae58760d7d
--- /dev/null
+++ b/platforms/avr/bootloaders/bootloadhid.c
@@ -0,0 +1,33 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <avr/eeprom.h>
+#include <avr/wdt.h>
+
+__attribute__((weak)) void bootloader_jump(void) {
+ // force bootloadHID to stay in bootloader mode, so that it waits
+ // for a new firmware to be flashed
+ // NOTE: this byte is part of QMK's "magic number" - changing it causes the EEPROM to be re-initialized
+ // thus every time the device is flashed the EEPROM will be wiped
+ eeprom_write_byte((uint8_t *)1, 0x00);
+
+ // watchdog reset
+ wdt_enable(WDTO_250MS);
+ for (;;)
+ ;
+}
diff --git a/platforms/avr/bootloaders/caterina.c b/platforms/avr/bootloaders/caterina.c
new file mode 100644
index 0000000000..82a16a3765
--- /dev/null
+++ b/platforms/avr/bootloaders/caterina.c
@@ -0,0 +1,39 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <avr/wdt.h>
+
+__attribute__((weak)) void bootloader_jump(void) {
+ // this block may be optional
+ // TODO: figure it out
+
+ uint16_t *const bootKeyPtr = (uint16_t *)0x0800;
+
+ // Value used by Caterina bootloader use to determine whether to run the
+ // sketch or the bootloader programmer.
+ uint16_t bootKey = 0x7777;
+
+ *bootKeyPtr = bootKey;
+
+ // setup watchdog timeout
+ wdt_enable(WDTO_60MS);
+
+ // wait for watchdog timer to trigger
+ while (1) {
+ }
+}
diff --git a/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/config.h b/platforms/avr/bootloaders/custom.c
index 39ce627e77..624fbe242a 100644
--- a/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/config.h
+++ b/platforms/avr/bootloaders/custom.c
@@ -1,8 +1,8 @@
-/* Copyright 2018-2020 Nick Brassel (@tzarc)
+/* Copyright 2021 QMK
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
+ * the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
@@ -14,10 +14,6 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
+#include "bootloader.h"
+
+__attribute__((weak)) void bootloader_jump(void) {}
diff --git a/platforms/avr/bootloaders/dfu.c b/platforms/avr/bootloaders/dfu.c
new file mode 100644
index 0000000000..cb42821a93
--- /dev/null
+++ b/platforms/avr/bootloaders/dfu.c
@@ -0,0 +1,52 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <avr/wdt.h>
+#include <util/delay.h>
+
+#define FLASH_SIZE (FLASHEND + 1L)
+
+/** \brief Entering the Bootloader via Software
+ *
+ * http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html
+ */
+#define BOOTLOADER_RESET_KEY 0xB007B007
+uint32_t reset_key __attribute__((section(".noinit,\"aw\",@nobits;")));
+
+__attribute__((weak)) void bootloader_jump(void) {
+ UDCON = 1;
+ USBCON = (1 << FRZCLK); // disable USB
+ UCSR1B = 0;
+ _delay_ms(5); // 5 seems to work fine
+
+ // watchdog reset
+ reset_key = BOOTLOADER_RESET_KEY;
+ wdt_enable(WDTO_250MS);
+ for (;;)
+ ;
+}
+
+/* this runs before main() */
+void bootloader_jump_after_watchdog_reset(void) __attribute__((used, naked, section(".init3")));
+void bootloader_jump_after_watchdog_reset(void) {
+ if ((MCUSR & (1 << WDRF)) && reset_key == BOOTLOADER_RESET_KEY) {
+ reset_key = 0;
+
+ ((void (*)(void))((FLASH_SIZE - BOOTLOADER_SIZE) >> 1))();
+ }
+}
diff --git a/platforms/avr/bootloaders/halfkay.c b/platforms/avr/bootloaders/halfkay.c
new file mode 100644
index 0000000000..6ce2e19114
--- /dev/null
+++ b/platforms/avr/bootloaders/halfkay.c
@@ -0,0 +1,128 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <avr/interrupt.h>
+#include <util/delay.h>
+
+__attribute__((weak)) void bootloader_jump(void) {
+ // http://www.pjrc.com/teensy/jump_to_bootloader.html
+
+ cli();
+ // disable watchdog, if enabled (it's not)
+ // disable all peripherals
+ // a shutdown call might make sense here
+ UDCON = 1;
+ USBCON = (1 << FRZCLK); // disable USB
+ UCSR1B = 0;
+ _delay_ms(5);
+
+#if defined(__AVR_AT90USB162__) // Teensy 1.0
+ EIMSK = 0;
+ PCICR = 0;
+ SPCR = 0;
+ ACSR = 0;
+ EECR = 0;
+ TIMSK0 = 0;
+ TIMSK1 = 0;
+ UCSR1B = 0;
+ DDRB = 0;
+ DDRC = 0;
+ DDRD = 0;
+ PORTB = 0;
+ PORTC = 0;
+ PORTD = 0;
+ asm volatile("jmp 0x3E00");
+#elif defined(__AVR_ATmega32U4__) // Teensy 2.0
+ EIMSK = 0;
+ PCICR = 0;
+ SPCR = 0;
+ ACSR = 0;
+ EECR = 0;
+ ADCSRA = 0;
+ TIMSK0 = 0;
+ TIMSK1 = 0;
+ TIMSK3 = 0;
+ TIMSK4 = 0;
+ UCSR1B = 0;
+ TWCR = 0;
+ DDRB = 0;
+ DDRC = 0;
+ DDRD = 0;
+ DDRE = 0;
+ DDRF = 0;
+ TWCR = 0;
+ PORTB = 0;
+ PORTC = 0;
+ PORTD = 0;
+ PORTE = 0;
+ PORTF = 0;
+ asm volatile("jmp 0x7E00");
+#elif defined(__AVR_AT90USB646__) // Teensy++ 1.0
+ EIMSK = 0;
+ PCICR = 0;
+ SPCR = 0;
+ ACSR = 0;
+ EECR = 0;
+ ADCSRA = 0;
+ TIMSK0 = 0;
+ TIMSK1 = 0;
+ TIMSK2 = 0;
+ TIMSK3 = 0;
+ UCSR1B = 0;
+ TWCR = 0;
+ DDRA = 0;
+ DDRB = 0;
+ DDRC = 0;
+ DDRD = 0;
+ DDRE = 0;
+ DDRF = 0;
+ PORTA = 0;
+ PORTB = 0;
+ PORTC = 0;
+ PORTD = 0;
+ PORTE = 0;
+ PORTF = 0;
+ asm volatile("jmp 0xFC00");
+#elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0
+ EIMSK = 0;
+ PCICR = 0;
+ SPCR = 0;
+ ACSR = 0;
+ EECR = 0;
+ ADCSRA = 0;
+ TIMSK0 = 0;
+ TIMSK1 = 0;
+ TIMSK2 = 0;
+ TIMSK3 = 0;
+ UCSR1B = 0;
+ TWCR = 0;
+ DDRA = 0;
+ DDRB = 0;
+ DDRC = 0;
+ DDRD = 0;
+ DDRE = 0;
+ DDRF = 0;
+ PORTA = 0;
+ PORTB = 0;
+ PORTC = 0;
+ PORTD = 0;
+ PORTE = 0;
+ PORTF = 0;
+ asm volatile("jmp 0x1FC00");
+#endif
+}
diff --git a/platforms/avr/bootloaders/usbasploader.c b/platforms/avr/bootloaders/usbasploader.c
new file mode 100644
index 0000000000..008bd16069
--- /dev/null
+++ b/platforms/avr/bootloaders/usbasploader.c
@@ -0,0 +1,56 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <avr/wdt.h>
+
+#define FLASH_SIZE (FLASHEND + 1L)
+
+#if !defined(MCUCSR)
+# if defined(MCUSR)
+# define MCUCSR MCUSR
+# endif
+#endif
+
+__attribute__((weak)) void bootloader_jump(void) {
+ // Taken with permission of Stephan Baerwolf from https://github.com/tinyusbboard/API/blob/master/apipage.c
+
+ wdt_enable(WDTO_15MS);
+ wdt_reset();
+ asm volatile("cli \n\t"
+ "ldi r29 , %[ramendhi] \n\t"
+ "ldi r28 , %[ramendlo] \n\t"
+#if (FLASHEND > 131071)
+ "ldi r18 , %[bootaddrhi] \n\t"
+ "st Y+, r18 \n\t"
+#endif
+ "ldi r18 , %[bootaddrme] \n\t"
+ "st Y+, r18 \n\t"
+ "ldi r18 , %[bootaddrlo] \n\t"
+ "st Y+, r18 \n\t"
+ "out %[mcucsrio], __zero_reg__ \n\t"
+ "bootloader_startup_loop%=: \n\t"
+ "rjmp bootloader_startup_loop%= \n\t"
+ :
+ : [mcucsrio] "I"(_SFR_IO_ADDR(MCUCSR)),
+#if (FLASHEND > 131071)
+ [ramendhi] "M"(((RAMEND - 2) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 2) >> 0) & 0xff), [bootaddrhi] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 16) & 0xff),
+#else
+ [ramendhi] "M"(((RAMEND - 1) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 1) >> 0) & 0xff),
+#endif
+ [bootaddrme] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 8) & 0xff), [bootaddrlo] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 0) & 0xff));
+}
diff --git a/platforms/avr/drivers/i2c_master.c b/platforms/avr/drivers/i2c_master.c
index 111b55d6b0..d4024378ca 100644
--- a/platforms/avr/drivers/i2c_master.c
+++ b/platforms/avr/drivers/i2c_master.c
@@ -32,6 +32,9 @@
# define I2C_START_RETRY_COUNT 20
#endif // I2C_START_RETRY_COUNT
+#define I2C_ACTION_READ 0x01
+#define I2C_ACTION_WRITE 0x00
+
#define TWBR_val (((F_CPU / F_SCL) - 16) / 2)
#define MAX(X, Y) ((X) > (Y) ? (X) : (Y))
@@ -154,7 +157,7 @@ int16_t i2c_read_nack(uint16_t timeout) {
}
i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
- i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
+ i2c_status_t status = i2c_start(address | I2C_ACTION_WRITE, timeout);
for (uint16_t i = 0; i < length && status >= 0; i++) {
status = i2c_write(data[i], timeout);
@@ -166,7 +169,7 @@ i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length,
}
i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
- i2c_status_t status = i2c_start(address | I2C_READ, timeout);
+ i2c_status_t status = i2c_start(address | I2C_ACTION_READ, timeout);
for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) {
status = i2c_read_ack(timeout);
diff --git a/platforms/avr/drivers/serial.c b/platforms/avr/drivers/serial.c
index 9a7345a53d..62908e5875 100644
--- a/platforms/avr/drivers/serial.c
+++ b/platforms/avr/drivers/serial.c
@@ -16,6 +16,7 @@
#include <util/delay.h>
#include <stddef.h>
#include <stdbool.h>
+#include "gpio.h"
#include "serial.h"
#ifdef SOFT_SERIAL_PIN
@@ -119,12 +120,6 @@
# error invalid SOFT_SERIAL_PIN value
# endif
-# define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
-# define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF))
-# define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
-# define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
-# define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF)))
-
# define ALWAYS_INLINE __attribute__((always_inline))
# define NO_INLINE __attribute__((noinline))
# define _delay_sub_us(x) __builtin_avr_delay_cycles(x)
@@ -414,13 +409,7 @@ ISR(SERIAL_PIN_INTERRUPT) {
// target recive phase
if (trans->initiator2target_buffer_size > 0) {
- if (serial_recive_packet((uint8_t *)split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size)) {
- *trans->status = TRANSACTION_ACCEPTED;
- } else {
- *trans->status = TRANSACTION_DATA_ERROR;
- }
- } else {
- *trans->status = TRANSACTION_ACCEPTED;
+ serial_recive_packet((uint8_t *)split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size);
}
sync_recv(); // weit initiator output to high
@@ -429,19 +418,13 @@ ISR(SERIAL_PIN_INTERRUPT) {
/////////
// start transaction by initiator
//
-// int soft_serial_transaction(int sstd_index)
+// bool soft_serial_transaction(int sstd_index)
//
-// Returns:
-// TRANSACTION_END
-// TRANSACTION_NO_RESPONSE
-// TRANSACTION_DATA_ERROR
// this code is very time dependent, so we need to disable interrupts
-int soft_serial_transaction(int sstd_index) {
- if (sstd_index > NUM_TOTAL_TRANSACTIONS) return TRANSACTION_TYPE_ERROR;
+bool soft_serial_transaction(int sstd_index) {
+ if (sstd_index > NUM_TOTAL_TRANSACTIONS) return false;
split_transaction_desc_t *trans = &split_transaction_table[sstd_index];
- if (!trans->status) return TRANSACTION_TYPE_ERROR; // not registered
-
cli();
// signal to the target that we want to start a transaction
@@ -468,9 +451,8 @@ int soft_serial_transaction(int sstd_index) {
// slave failed to pull the line low, assume not present
serial_output();
serial_high();
- *trans->status = TRANSACTION_NO_RESPONSE;
sei();
- return TRANSACTION_NO_RESPONSE;
+ return false;
}
_delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT);
}
@@ -481,9 +463,8 @@ int soft_serial_transaction(int sstd_index) {
if (!serial_recive_packet((uint8_t *)split_trans_target2initiator_buffer(trans), trans->target2initiator_buffer_size)) {
serial_output();
serial_high();
- *trans->status = TRANSACTION_DATA_ERROR;
sei();
- return TRANSACTION_DATA_ERROR;
+ return false;
}
}
@@ -498,19 +479,8 @@ int soft_serial_transaction(int sstd_index) {
// always, release the line when not in use
sync_send();
- *trans->status = TRANSACTION_END;
- sei();
- return TRANSACTION_END;
-}
-
-int soft_serial_get_and_clean_status(int sstd_index) {
- split_transaction_desc_t *trans = &split_transaction_table[sstd_index];
- cli();
- int retval = *trans->status;
- *trans->status = 0;
- ;
sei();
- return retval;
+ return true;
}
#endif
diff --git a/platforms/avr/gpio.h b/platforms/avr/gpio.h
index e9be68491d..95f15c28dc 100644
--- a/platforms/avr/gpio.h
+++ b/platforms/avr/gpio.h
@@ -25,7 +25,9 @@ typedef uint8_t pin_t;
#define setPinInput(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
#define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
#define setPinInputLow(pin) _Static_assert(0, "AVR processors cannot implement an input as pull low")
-#define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF))
+#define setPinOutputPushPull(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF))
+#define setPinOutputOpenDrain(pin) _Static_assert(0, "AVR platform does not implement an open-drain output")
+#define setPinOutput(pin) setPinOutputPushPull(pin)
#define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
#define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
@@ -34,16 +36,3 @@ typedef uint8_t pin_t;
#define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF)))
#define togglePin(pin) (PORTx_ADDRESS(pin) ^= _BV((pin)&0xF))
-
-/* Operation of GPIO by port. */
-
-typedef uint8_t port_data_t;
-
-#define readPort(port) PINx_ADDRESS(port)
-
-#define setPortBitInput(port, bit) (DDRx_ADDRESS(port) &= ~_BV((bit)&0xF), PORTx_ADDRESS(port) &= ~_BV((bit)&0xF))
-#define setPortBitInputHigh(port, bit) (DDRx_ADDRESS(port) &= ~_BV((bit)&0xF), PORTx_ADDRESS(port) |= _BV((bit)&0xF))
-#define setPortBitOutput(port, bit) (DDRx_ADDRESS(port) |= _BV((bit)&0xF))
-
-#define writePortBitLow(port, bit) (PORTx_ADDRESS(port) &= ~_BV((bit)&0xF))
-#define writePortBitHigh(port, bit) (PORTx_ADDRESS(port) |= _BV((bit)&0xF))
diff --git a/platforms/avr/platform.mk b/platforms/avr/platform.mk
index b45108736f..4d9cafaeef 100644
--- a/platforms/avr/platform.mk
+++ b/platforms/avr/platform.mk
@@ -159,7 +159,7 @@ endif
bootloader:
ifeq ($(strip $(QMK_BOOTLOADER_TYPE)),)
- $(error Please set BOOTLOADER to "qmk-dfu" or "qmk-hid" first!)
+ $(call CATASTROPHIC_ERROR,Invalid BOOTLOADER,Please set BOOTLOADER to "qmk-dfu" or "qmk-hid" first!)
else
make -C lib/lufa/Bootloaders/$(QMK_BOOTLOADER_TYPE)/ clean
$(QMK_BIN) generate-dfu-header --quiet --keyboard $(KEYBOARD) --output lib/lufa/Bootloaders/$(QMK_BOOTLOADER_TYPE)/Keyboard.h
diff --git a/platforms/avr/suspend.c b/platforms/avr/suspend.c
index b614746e6c..b615979439 100644
--- a/platforms/avr/suspend.c
+++ b/platforms/avr/suspend.c
@@ -2,12 +2,9 @@
#include <avr/sleep.h>
#include <avr/wdt.h>
#include <avr/interrupt.h>
-#include "matrix.h"
-#include "action.h"
#include "suspend.h"
+#include "action.h"
#include "timer.h"
-#include "led.h"
-#include "host.h"
#ifdef PROTOCOL_LUFA
# include "lufa.h"
@@ -16,19 +13,6 @@
# include "vusb.h"
#endif
-/** \brief Suspend idle
- *
- * FIXME: needs doc
- */
-void suspend_idle(uint8_t time) {
- cli();
- set_sleep_mode(SLEEP_MODE_IDLE);
- sleep_enable();
- sei();
- sleep_cpu();
- sleep_disable();
-}
-
// TODO: This needs some cleanup
#if !defined(NO_SUSPEND_POWER_DOWN) && defined(WDT_vect)
@@ -91,6 +75,18 @@ static void power_down(uint8_t wdto) {
// Disable watchdog after sleep
wdt_disable();
}
+
+/* watchdog timeout */
+ISR(WDT_vect) {
+ // compensate timer for sleep
+ switch (wdt_timeout) {
+ case WDTO_15MS:
+ timer_count += 15 + 2; // WDTO_15MS + 2(from observation)
+ break;
+ default:;
+ }
+}
+
#endif
/** \brief Suspend power down
@@ -115,18 +111,6 @@ void suspend_power_down(void) {
#endif
}
-__attribute__((weak)) void matrix_power_up(void) {}
-__attribute__((weak)) void matrix_power_down(void) {}
-bool suspend_wakeup_condition(void) {
- matrix_power_up();
- matrix_scan();
- matrix_power_down();
- for (uint8_t r = 0; r < MATRIX_ROWS; r++) {
- if (matrix_get_row(r)) return true;
- }
- return false;
-}
-
/** \brief run immediately after wakeup
*
* FIXME: needs doc
@@ -137,16 +121,3 @@ void suspend_wakeup_init(void) {
suspend_wakeup_init_quantum();
}
-
-#if !defined(NO_SUSPEND_POWER_DOWN) && defined(WDT_vect)
-/* watchdog timeout */
-ISR(WDT_vect) {
- // compensate timer for sleep
- switch (wdt_timeout) {
- case WDTO_15MS:
- timer_count += 15 + 2; // WDTO_15MS + 2(from observation)
- break;
- default:;
- }
-}
-#endif
diff --git a/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/bootloader_defs.h b/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/bootloader_defs.h
deleted file mode 100644
index 4da3d39a32..0000000000
--- a/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/bootloader_defs.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
diff --git a/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/bootloader_defs.h b/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/bootloader_defs.h
deleted file mode 100644
index 4da3d39a32..0000000000
--- a/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/bootloader_defs.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
diff --git a/platforms/chibios/boards/GENERIC_STM32_F042X6/configs/bootloader_defs.h b/platforms/chibios/boards/GENERIC_STM32_F042X6/configs/bootloader_defs.h
deleted file mode 100644
index 25113425a6..0000000000
--- a/platforms/chibios/boards/GENERIC_STM32_F042X6/configs/bootloader_defs.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC400
diff --git a/platforms/chibios/boards/GENERIC_STM32_F072XB/configs/bootloader_defs.h b/platforms/chibios/boards/GENERIC_STM32_F072XB/configs/bootloader_defs.h
deleted file mode 100644
index dccd0fa5d1..0000000000
--- a/platforms/chibios/boards/GENERIC_STM32_F072XB/configs/bootloader_defs.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
diff --git a/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/bootloader_defs.h b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/bootloader_defs.h
deleted file mode 100644
index 87ac7b10dc..0000000000
--- a/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/bootloader_defs.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
diff --git a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h
index cc52a953ed..90a41326a1 100644
--- a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h
@@ -17,7 +17,7 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606.
*/
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
+
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
#endif
diff --git a/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/config.h
index cc52a953ed..90a41326a1 100644
--- a/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/config.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/config.h
@@ -17,7 +17,7 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606.
*/
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
+
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
#endif
diff --git a/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/config.h
index cc52a953ed..90a41326a1 100644
--- a/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/config.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/config.h
@@ -17,7 +17,7 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606.
*/
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
+
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
#endif
diff --git a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h
index c27c61b19a..fc9055ccfb 100644
--- a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h
+++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h
@@ -17,7 +17,6 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606.
*/
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH
diff --git a/platforms/chibios/boards/GENERIC_STM32_L432XC/board/board.mk b/platforms/chibios/boards/GENERIC_STM32_L432XC/board/board.mk
new file mode 100644
index 0000000000..1250385eb8
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_L432XC/board/board.mk
@@ -0,0 +1,9 @@
+# List of all the board related files.
+BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO32_L432KC/board.c
+
+# Required include directories
+BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO32_L432KC
+
+# Shared variables
+ALLCSRC += $(BOARDSRC)
+ALLINC += $(BOARDINC)
diff --git a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h
new file mode 100644
index 0000000000..b1838b30a8
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h
@@ -0,0 +1,10 @@
+// Copyright 2021 Nick Brassel (@tzarc)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+// Fixup equivalent usages within QMK as the base board definitions only go up to high
+#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH
+
+#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
+# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+#endif
diff --git a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h
new file mode 100644
index 0000000000..707134d49e
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h
@@ -0,0 +1,267 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ * STM32L4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+#define STM32L4xx_MCUCONF
+#define STM32L432_MCUCONF
+#define STM32L433_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_VOS STM32_VOS_RANGE1
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_HSI16_ENABLED TRUE
+#define STM32_HSI48_ENABLED TRUE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED FALSE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_MSIPLL_ENABLED FALSE
+#define STM32_MSIRANGE STM32_MSIRANGE_4M
+#define STM32_MSISRANGE STM32_MSISRANGE_4M
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSI16
+#define STM32_PLLM_VALUE 1
+#define STM32_PLLN_VALUE 10
+#define STM32_PLLPDIV_VALUE 0
+#define STM32_PLLP_VALUE 7
+#define STM32_PLLQ_VALUE 2
+#define STM32_PLLR_VALUE 2
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV1
+#define STM32_PPRE2 STM32_PPRE2_DIV1
+#define STM32_STOPWUCK STM32_STOPWUCK_MSI
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE STM32_MCOPRE_DIV1
+#define STM32_LSCOSEL STM32_LSCOSEL_NOCLOCK
+#define STM32_PLLSAI1N_VALUE 24
+#define STM32_PLLSAI1PDIV_VALUE 0
+#define STM32_PLLSAI1P_VALUE 7
+#define STM32_PLLSAI1Q_VALUE 2
+#define STM32_PLLSAI1R_VALUE 2
+
+/*
+ * Peripherals clock sources.
+ */
+#define STM32_USART1SEL STM32_USART1SEL_SYSCLK
+#define STM32_USART2SEL STM32_USART2SEL_SYSCLK
+#define STM32_LPUART1SEL STM32_LPUART1SEL_SYSCLK
+#define STM32_I2C1SEL STM32_I2C1SEL_SYSCLK
+#define STM32_I2C3SEL STM32_I2C3SEL_SYSCLK
+#define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1
+#define STM32_LPTIM2SEL STM32_LPTIM2SEL_PCLK1
+#define STM32_SAI1SEL STM32_SAI1SEL_OFF
+#define STM32_CLK48SEL STM32_CLK48SEL_HSI48
+#define STM32_ADCSEL STM32_ADCSEL_SYSCLK
+#define STM32_SWPMI1SEL STM32_SWPMI1SEL_PCLK1
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+
+/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_PRIORITY 6
+#define STM32_IRQ_EXTI1_PRIORITY 6
+#define STM32_IRQ_EXTI2_PRIORITY 6
+#define STM32_IRQ_EXTI3_PRIORITY 6
+#define STM32_IRQ_EXTI4_PRIORITY 6
+#define STM32_IRQ_EXTI5_9_PRIORITY 6
+#define STM32_IRQ_EXTI10_15_PRIORITY 6
+#define STM32_IRQ_EXTI1635_38_PRIORITY 6
+#define STM32_IRQ_EXTI18_PRIORITY 6
+#define STM32_IRQ_EXTI19_PRIORITY 6
+#define STM32_IRQ_EXTI20_PRIORITY 6
+#define STM32_IRQ_EXTI21_22_PRIORITY 15
+
+#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7
+#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7
+#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7
+#define STM32_IRQ_TIM1_CC_PRIORITY 7
+#define STM32_IRQ_TIM2_PRIORITY 7
+#define STM32_IRQ_TIM6_PRIORITY 7
+#define STM32_IRQ_TIM7_PRIORITY 7
+
+#define STM32_IRQ_USART1_PRIORITY 12
+#define STM32_IRQ_USART2_PRIORITY 12
+#define STM32_IRQ_LPUART1_PRIORITY 12
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_COMPACT_SAMPLES FALSE
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_ADC12_IRQ_PRIORITY 5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC123_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC123_PRESC ADC_CCR_PRESC_DIV2
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1 FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY 11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE FALSE
+#define STM32_DAC_USE_DAC1_CH1 FALSE
+#define STM32_DAC_USE_DAC1_CH2 FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM6 FALSE
+#define STM32_GPT_USE_TIM7 FALSE
+#define STM32_GPT_USE_TIM15 FALSE
+#define STM32_GPT_USE_TIM16 FALSE
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C3 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C1_IRQ_PRIORITY 5
+#define STM32_I2C_I2C3_IRQ_PRIORITY 5
+#define STM32_I2C_I2C1_DMA_PRIORITY 3
+#define STM32_I2C_I2C3_DMA_PRIORITY 3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM15 FALSE
+#define STM32_ICU_USE_TIM16 FALSE
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM15 FALSE
+#define STM32_PWM_USE_TIM16 FALSE
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_PRESA_VALUE 32
+#define STM32_RTC_PRESS_VALUE 1024
+#define STM32_RTC_CR_INIT 0
+#define STM32_RTC_TAMPCR_INIT 0
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USE_LPUART1 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 12
+#define STM32_SERIAL_USART2_PRIORITY 12
+#define STM32_SERIAL_LPUART1_PRIORITY 12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
+#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * TRNG driver system settings.
+ */
+#define STM32_TRNG_USE_RNG1 FALSE
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1 TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG FALSE
+
+/*
+ * WSPI driver system settings.
+ */
+#define STM32_WSPI_USE_QUADSPI1 FALSE
+#define STM32_WSPI_QUADSPI1_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#define STM32_WSPI_QUADSPI1_PRESCALER_VALUE 1
+
+#endif /* MCUCONF_H */
diff --git a/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h
index c27c61b19a..fc9055ccfb 100644
--- a/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h
+++ b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h
@@ -17,7 +17,6 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606.
*/
-#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH
diff --git a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/bootloader_defs.h b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/bootloader_defs.h
deleted file mode 100644
index c929d2ad03..0000000000
--- a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/bootloader_defs.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* Address for jumping to bootloader on WB32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.westberrytech.com/down/mcu/data/WB32F3G71xx_rm.pdf
- */
-#ifndef WB32_BOOTLOADER_ADDRESS
-# undef STM32_BOOTLOADER_ADDRESS
-# define WB32_BOOTLOADER_ADDRESS 0x1FFFE000
-# define STM32_BOOTLOADER_ADDRESS WB32_BOOTLOADER_ADDRESS
-#else
-# undef STM32_BOOTLOADER_ADDRESS
-# define STM32_BOOTLOADER_ADDRESS WB32_BOOTLOADER_ADDRESS
-#endif
diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/bootloader_defs.h b/platforms/chibios/boards/QMK_PROTON_C/configs/bootloader_defs.h
deleted file mode 100644
index 3b0e9d20a6..0000000000
--- a/platforms/chibios/boards/QMK_PROTON_C/configs/bootloader_defs.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
diff --git a/platforms/chibios/bootloader.c b/platforms/chibios/bootloader.c
deleted file mode 100644
index 58212948b0..0000000000
--- a/platforms/chibios/bootloader.c
+++ /dev/null
@@ -1,145 +0,0 @@
-#include "bootloader.h"
-
-#include <ch.h>
-#include <hal.h>
-#include "wait.h"
-
-/* This code should be checked whether it runs correctly on platforms */
-#define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0))
-#define BOOTLOADER_MAGIC 0xDEADBEEF
-#define MAGIC_ADDR (unsigned long *)(SYMVAL(__ram0_end__) - 4)
-
-#ifndef STM32_BOOTLOADER_DUAL_BANK
-# define STM32_BOOTLOADER_DUAL_BANK FALSE
-#endif
-
-#ifdef BOOTLOADER_TINYUF2
-
-# define DBL_TAP_MAGIC 0xf01669ef // From tinyuf2's board_api.h
-
-// defined by linker script
-extern uint32_t _board_dfu_dbl_tap[];
-# define DBL_TAP_REG _board_dfu_dbl_tap[0]
-
-void bootloader_jump(void) {
- DBL_TAP_REG = DBL_TAP_MAGIC;
- NVIC_SystemReset();
-}
-
-void enter_bootloader_mode_if_requested(void) { /* not needed, no two-stage reset */
-}
-
-#elif STM32_BOOTLOADER_DUAL_BANK
-
-// Need pin definitions
-# include "config_common.h"
-
-# ifndef STM32_BOOTLOADER_DUAL_BANK_GPIO
-# error "No STM32_BOOTLOADER_DUAL_BANK_GPIO defined, don't know which pin to toggle"
-# endif
-
-# ifndef STM32_BOOTLOADER_DUAL_BANK_POLARITY
-# define STM32_BOOTLOADER_DUAL_BANK_POLARITY 0
-# endif
-
-# ifndef STM32_BOOTLOADER_DUAL_BANK_DELAY
-# define STM32_BOOTLOADER_DUAL_BANK_DELAY 100000
-# endif
-
-extern uint32_t __ram0_end__;
-
-__attribute__((weak)) void bootloader_jump(void) {
- // For STM32 MCUs with dual-bank flash, and we're incapable of jumping to the bootloader. The first valid flash
- // bank is executed unconditionally after a reset, so it doesn't enter DFU unless BOOT0 is high. Instead, we do
- // it with hardware...in this case, we pull a GPIO high/low depending on the configuration, connects 3.3V to
- // BOOT0's RC charging circuit, lets it charge the capacitor, and issue a system reset. See the QMK discord
- // #hardware channel pins for an example circuit.
- palSetPadMode(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_MODE_OUTPUT_PUSHPULL);
-# if STM32_BOOTLOADER_DUAL_BANK_POLARITY
- palSetPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO));
-# else
- palClearPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO));
-# endif
-
- // Wait for a while for the capacitor to charge
- wait_ms(100);
-
- // Issue a system reset to get the ROM bootloader to execute, with BOOT0 high
- NVIC_SystemReset();
-}
-
-void enter_bootloader_mode_if_requested(void) {} // not needed at all, but if anybody attempts to invoke it....
-
-#elif defined(STM32_BOOTLOADER_ADDRESS) // STM32_BOOTLOADER_DUAL_BANK
-
-extern uint32_t __ram0_end__;
-
-__attribute__((weak)) void bootloader_jump(void) {
- *MAGIC_ADDR = BOOTLOADER_MAGIC; // set magic flag => reset handler will jump into boot loader
- NVIC_SystemReset();
-}
-
-void enter_bootloader_mode_if_requested(void) {
- unsigned long *check = MAGIC_ADDR;
- if (*check == BOOTLOADER_MAGIC) {
- *check = 0;
- __set_CONTROL(0);
- __set_MSP(*(__IO uint32_t *)STM32_BOOTLOADER_ADDRESS);
- __enable_irq();
-
- typedef void (*BootJump_t)(void);
- BootJump_t boot_jump = *(BootJump_t *)(STM32_BOOTLOADER_ADDRESS + 4);
- boot_jump();
- while (1)
- ;
- }
-}
-
-#elif defined(GD32VF103)
-
-# define DBGMCU_KEY_UNLOCK 0x4B5A6978
-# define DBGMCU_CMD_RESET 0x1
-
-__IO uint32_t *DBGMCU_KEY = (uint32_t *)DBGMCU_BASE + 0x0CU;
-__IO uint32_t *DBGMCU_CMD = (uint32_t *)DBGMCU_BASE + 0x08U;
-
-__attribute__((weak)) void bootloader_jump(void) {
- /* The MTIMER unit of the GD32VF103 doesn't have the MSFRST
- * register to generate a software reset request.
- * BUT instead two undocumented registers in the debug peripheral
- * that allow issueing a software reset. WHO would need the MSFRST
- * register anyway? Source:
- * https://github.com/esmil/gd32vf103inator/blob/master/include/gd32vf103/dbg.h */
- *DBGMCU_KEY = DBGMCU_KEY_UNLOCK;
- *DBGMCU_CMD = DBGMCU_CMD_RESET;
-}
-
-void enter_bootloader_mode_if_requested(void) { /* Jumping to bootloader is not possible from user code. */
-}
-
-#elif defined(KL2x) || defined(K20x) || defined(MK66F18) || defined(MIMXRT1062) // STM32_BOOTLOADER_DUAL_BANK // STM32_BOOTLOADER_ADDRESS
-/* Kinetis */
-
-# if defined(BOOTLOADER_KIIBOHD)
-/* Kiibohd Bootloader (MCHCK and Infinity KB) */
-# define SCB_AIRCR_VECTKEY_WRITEMAGIC 0x05FA0000
-const uint8_t sys_reset_to_loader_magic[] = "\xff\x00\x7fRESET TO LOADER\x7f\x00\xff\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00";
-__attribute__((weak)) void bootloader_jump(void) {
- void *volatile vbat = (void *)VBAT;
- __builtin_memcpy(vbat, (const void *)sys_reset_to_loader_magic, sizeof(sys_reset_to_loader_magic));
- // request reset
- SCB->AIRCR = SCB_AIRCR_VECTKEY_WRITEMAGIC | SCB_AIRCR_SYSRESETREQ_Msk;
-}
-
-# else /* defined(BOOTLOADER_KIIBOHD) */
-/* Default for Kinetis - expecting an ARM Teensy */
-# include "wait.h"
-__attribute__((weak)) void bootloader_jump(void) {
- wait_ms(100);
- __BKPT(0);
-}
-# endif /* defined(BOOTLOADER_KIIBOHD) */
-
-#else /* neither STM32 nor KINETIS */
-__attribute__((weak)) void bootloader_jump(void) {}
-#endif
diff --git a/platforms/chibios/bootloaders/custom.c b/platforms/chibios/bootloaders/custom.c
new file mode 100644
index 0000000000..bba9fc4637
--- /dev/null
+++ b/platforms/chibios/bootloaders/custom.c
@@ -0,0 +1,21 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+__attribute__((weak)) void bootloader_jump(void) {}
+
+__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {}
diff --git a/platforms/chibios/bootloaders/gd32v_dfu.c b/platforms/chibios/bootloaders/gd32v_dfu.c
new file mode 100644
index 0000000000..baa7d1f882
--- /dev/null
+++ b/platforms/chibios/bootloaders/gd32v_dfu.c
@@ -0,0 +1,40 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <ch.h>
+#include <hal.h>
+
+#define DBGMCU_KEY_UNLOCK 0x4B5A6978
+#define DBGMCU_CMD_RESET 0x1
+
+__IO uint32_t *DBGMCU_KEY = (uint32_t *)DBGMCU_BASE + 0x0CU;
+__IO uint32_t *DBGMCU_CMD = (uint32_t *)DBGMCU_BASE + 0x08U;
+
+__attribute__((weak)) void bootloader_jump(void) {
+ /* The MTIMER unit of the GD32VF103 doesn't have the MSFRST
+ * register to generate a software reset request.
+ * BUT instead two undocumented registers in the debug peripheral
+ * that allow issueing a software reset. WHO would need the MSFRST
+ * register anyway? Source:
+ * https://github.com/esmil/gd32vf103inator/blob/master/include/gd32vf103/dbg.h */
+ *DBGMCU_KEY = DBGMCU_KEY_UNLOCK;
+ *DBGMCU_CMD = DBGMCU_CMD_RESET;
+}
+
+/* Jumping to bootloader is not possible from user code. */
+void enter_bootloader_mode_if_requested(void) {}
diff --git a/platforms/chibios/bootloaders/halfkay.c b/platforms/chibios/bootloaders/halfkay.c
new file mode 100644
index 0000000000..168c2abc23
--- /dev/null
+++ b/platforms/chibios/bootloaders/halfkay.c
@@ -0,0 +1,25 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <ch.h>
+#include "wait.h"
+
+__attribute__((weak)) void bootloader_jump(void) {
+ wait_ms(100);
+ __BKPT(0);
+}
diff --git a/platforms/chibios/bootloaders/kiibohd.c b/platforms/chibios/bootloaders/kiibohd.c
new file mode 100644
index 0000000000..911e807092
--- /dev/null
+++ b/platforms/chibios/bootloaders/kiibohd.c
@@ -0,0 +1,32 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <ch.h>
+
+/* Kiibohd Bootloader (MCHCK and Infinity KB) */
+#define SCB_AIRCR_VECTKEY_WRITEMAGIC 0x05FA0000
+
+const uint8_t sys_reset_to_loader_magic[] = "\xff\x00\x7fRESET TO LOADER\x7f\x00\xff\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00";
+
+__attribute__((weak)) void bootloader_jump(void) {
+ void *volatile vbat = (void *)VBAT;
+ __builtin_memcpy(vbat, (const void *)sys_reset_to_loader_magic, sizeof(sys_reset_to_loader_magic));
+
+ // request reset
+ SCB->AIRCR = SCB_AIRCR_VECTKEY_WRITEMAGIC | SCB_AIRCR_SYSRESETREQ_Msk;
+}
diff --git a/platforms/chibios/bootloaders/stm32_dfu.c b/platforms/chibios/bootloaders/stm32_dfu.c
new file mode 100644
index 0000000000..0a113570f7
--- /dev/null
+++ b/platforms/chibios/bootloaders/stm32_dfu.c
@@ -0,0 +1,94 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <ch.h>
+#include <hal.h>
+#include "wait.h"
+
+extern uint32_t __ram0_end__;
+
+#ifndef STM32_BOOTLOADER_DUAL_BANK
+# define STM32_BOOTLOADER_DUAL_BANK FALSE
+#endif
+
+#if STM32_BOOTLOADER_DUAL_BANK
+# include "config_common.h"
+
+# ifndef STM32_BOOTLOADER_DUAL_BANK_GPIO
+# error "No STM32_BOOTLOADER_DUAL_BANK_GPIO defined, don't know which pin to toggle"
+# endif
+
+# ifndef STM32_BOOTLOADER_DUAL_BANK_POLARITY
+# define STM32_BOOTLOADER_DUAL_BANK_POLARITY 0
+# endif
+
+# ifndef STM32_BOOTLOADER_DUAL_BANK_DELAY
+# define STM32_BOOTLOADER_DUAL_BANK_DELAY 100000
+# endif
+
+__attribute__((weak)) void bootloader_jump(void) {
+ // For STM32 MCUs with dual-bank flash, and we're incapable of jumping to the bootloader. The first valid flash
+ // bank is executed unconditionally after a reset, so it doesn't enter DFU unless BOOT0 is high. Instead, we do
+ // it with hardware...in this case, we pull a GPIO high/low depending on the configuration, connects 3.3V to
+ // BOOT0's RC charging circuit, lets it charge the capacitor, and issue a system reset. See the QMK discord
+ // #hardware channel pins for an example circuit.
+ palSetPadMode(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_MODE_OUTPUT_PUSHPULL);
+# if STM32_BOOTLOADER_DUAL_BANK_POLARITY
+ palSetPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO));
+# else
+ palClearPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO));
+# endif
+
+ // Wait for a while for the capacitor to charge
+ wait_ms(100);
+
+ // Issue a system reset to get the ROM bootloader to execute, with BOOT0 high
+ NVIC_SystemReset();
+}
+
+// not needed at all, but if anybody attempts to invoke it....
+void enter_bootloader_mode_if_requested(void) {}
+
+#else
+
+/* This code should be checked whether it runs correctly on platforms */
+# define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0))
+# define BOOTLOADER_MAGIC 0xDEADBEEF
+# define MAGIC_ADDR (unsigned long *)(SYMVAL(__ram0_end__) - 4)
+
+__attribute__((weak)) void bootloader_jump(void) {
+ *MAGIC_ADDR = BOOTLOADER_MAGIC; // set magic flag => reset handler will jump into boot loader
+ NVIC_SystemReset();
+}
+
+void enter_bootloader_mode_if_requested(void) {
+ unsigned long *check = MAGIC_ADDR;
+ if (*check == BOOTLOADER_MAGIC) {
+ *check = 0;
+ __set_CONTROL(0);
+ __set_MSP(*(__IO uint32_t *)STM32_BOOTLOADER_ADDRESS);
+ __enable_irq();
+
+ typedef void (*BootJump_t)(void);
+ BootJump_t boot_jump = *(BootJump_t *)(STM32_BOOTLOADER_ADDRESS + 4);
+ boot_jump();
+ while (1)
+ ;
+ }
+}
+#endif
diff --git a/platforms/chibios/bootloaders/stm32duino.c b/platforms/chibios/bootloaders/stm32duino.c
new file mode 100644
index 0000000000..dd1d551fa9
--- /dev/null
+++ b/platforms/chibios/bootloaders/stm32duino.c
@@ -0,0 +1,21 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <ch.h>
+
+__attribute__((weak)) void bootloader_jump(void) { NVIC_SystemReset(); }
diff --git a/platforms/chibios/bootloaders/tinyuf2.c b/platforms/chibios/bootloaders/tinyuf2.c
new file mode 100644
index 0000000000..9ffca5dec8
--- /dev/null
+++ b/platforms/chibios/bootloaders/tinyuf2.c
@@ -0,0 +1,34 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <ch.h>
+
+// From tinyuf2's board_api.h
+#define DBL_TAP_MAGIC 0xF01669EF
+
+// defined by linker script
+extern uint32_t _board_dfu_dbl_tap[];
+#define DBL_TAP_REG _board_dfu_dbl_tap[0]
+
+__attribute__((weak)) void bootloader_jump(void) {
+ DBL_TAP_REG = DBL_TAP_MAGIC;
+ NVIC_SystemReset();
+}
+
+/* not needed, no two-stage reset */
+void enter_bootloader_mode_if_requested(void) {}
diff --git a/platforms/chibios/drivers/i2c_master.c b/platforms/chibios/drivers/i2c_master.c
index 43591d56f8..4a5d4760d0 100644
--- a/platforms/chibios/drivers/i2c_master.c
+++ b/platforms/chibios/drivers/i2c_master.c
@@ -27,8 +27,67 @@
#include "quantum.h"
#include "i2c_master.h"
#include <string.h>
+#include <ch.h>
#include <hal.h>
+#ifndef I2C1_SCL_PIN
+# define I2C1_SCL_PIN B6
+#endif
+#ifndef I2C1_SDA_PIN
+# define I2C1_SDA_PIN B7
+#endif
+
+#ifdef USE_I2CV1
+# ifndef I2C1_OPMODE
+# define I2C1_OPMODE OPMODE_I2C
+# endif
+# ifndef I2C1_CLOCK_SPEED
+# define I2C1_CLOCK_SPEED 100000 /* 400000 */
+# endif
+# ifndef I2C1_DUTY_CYCLE
+# define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
+# endif
+#else
+// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
+// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+# ifndef I2C1_TIMINGR_PRESC
+# define I2C1_TIMINGR_PRESC 0U
+# endif
+# ifndef I2C1_TIMINGR_SCLDEL
+# define I2C1_TIMINGR_SCLDEL 7U
+# endif
+# ifndef I2C1_TIMINGR_SDADEL
+# define I2C1_TIMINGR_SDADEL 0U
+# endif
+# ifndef I2C1_TIMINGR_SCLH
+# define I2C1_TIMINGR_SCLH 38U
+# endif
+# ifndef I2C1_TIMINGR_SCLL
+# define I2C1_TIMINGR_SCLL 129U
+# endif
+#endif
+
+#ifndef I2C_DRIVER
+# define I2C_DRIVER I2CD1
+#endif
+
+#ifdef USE_GPIOV1
+# ifndef I2C1_SCL_PAL_MODE
+# define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN
+# endif
+# ifndef I2C1_SDA_PAL_MODE
+# define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN
+# endif
+#else
+// The default PAL alternate modes are used to signal that the pins are used for I2C
+# ifndef I2C1_SCL_PAL_MODE
+# define I2C1_SCL_PAL_MODE 4
+# endif
+# ifndef I2C1_SDA_PAL_MODE
+# define I2C1_SDA_PAL_MODE 4
+# endif
+#endif
+
static uint8_t i2c_address;
static const I2CConfig i2cconfig = {
diff --git a/platforms/chibios/drivers/i2c_master.h b/platforms/chibios/drivers/i2c_master.h
index 5f082e9d1e..deee7ecc08 100644
--- a/platforms/chibios/drivers/i2c_master.h
+++ b/platforms/chibios/drivers/i2c_master.h
@@ -24,66 +24,7 @@
*/
#pragma once
-#include <ch.h>
-#include <hal.h>
-
-#ifndef I2C1_SCL_PIN
-# define I2C1_SCL_PIN B6
-#endif
-#ifndef I2C1_SDA_PIN
-# define I2C1_SDA_PIN B7
-#endif
-
-#ifdef USE_I2CV1
-# ifndef I2C1_OPMODE
-# define I2C1_OPMODE OPMODE_I2C
-# endif
-# ifndef I2C1_CLOCK_SPEED
-# define I2C1_CLOCK_SPEED 100000 /* 400000 */
-# endif
-# ifndef I2C1_DUTY_CYCLE
-# define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
-# endif
-#else
-// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
-// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
-# ifndef I2C1_TIMINGR_PRESC
-# define I2C1_TIMINGR_PRESC 0U
-# endif
-# ifndef I2C1_TIMINGR_SCLDEL
-# define I2C1_TIMINGR_SCLDEL 7U
-# endif
-# ifndef I2C1_TIMINGR_SDADEL
-# define I2C1_TIMINGR_SDADEL 0U
-# endif
-# ifndef I2C1_TIMINGR_SCLH
-# define I2C1_TIMINGR_SCLH 38U
-# endif
-# ifndef I2C1_TIMINGR_SCLL
-# define I2C1_TIMINGR_SCLL 129U
-# endif
-#endif
-
-#ifndef I2C_DRIVER
-# define I2C_DRIVER I2CD1
-#endif
-
-#ifdef USE_GPIOV1
-# ifndef I2C1_SCL_PAL_MODE
-# define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN
-# endif
-# ifndef I2C1_SDA_PAL_MODE
-# define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN
-# endif
-#else
-// The default PAL alternate modes are used to signal that the pins are used for I2C
-# ifndef I2C1_SCL_PAL_MODE
-# define I2C1_SCL_PAL_MODE 4
-# endif
-# ifndef I2C1_SDA_PAL_MODE
-# define I2C1_SDA_PAL_MODE 4
-# endif
-#endif
+#include <stdint.h>
typedef int16_t i2c_status_t;
diff --git a/platforms/chibios/drivers/serial.c b/platforms/chibios/drivers/serial.c
index ef6f0aa8d5..17d0b32be8 100644
--- a/platforms/chibios/drivers/serial.c
+++ b/platforms/chibios/drivers/serial.c
@@ -179,8 +179,6 @@ void interrupt_handler(void *arg) {
// wait for the sync to finish sending
serial_delay();
- *trans->status = (checksum_computed == checksum_received) ? TRANSACTION_ACCEPTED : TRANSACTION_DATA_ERROR;
-
// end transaction
serial_input();
@@ -193,17 +191,12 @@ void interrupt_handler(void *arg) {
/////////
// start transaction by initiator
//
-// int soft_serial_transaction(int sstd_index)
+// bool soft_serial_transaction(int sstd_index)
//
-// Returns:
-// TRANSACTION_END
-// TRANSACTION_NO_RESPONSE
-// TRANSACTION_DATA_ERROR
// this code is very time dependent, so we need to disable interrupts
-int soft_serial_transaction(int sstd_index) {
- if (sstd_index > NUM_TOTAL_TRANSACTIONS) return TRANSACTION_TYPE_ERROR;
+bool soft_serial_transaction(int sstd_index) {
+ if (sstd_index > NUM_TOTAL_TRANSACTIONS) return false;
split_transaction_desc_t *trans = &split_transaction_table[sstd_index];
- if (!trans->status) return TRANSACTION_TYPE_ERROR; // not registered
// TODO: remove extra delay between transactions
serial_delay();
@@ -226,7 +219,7 @@ int soft_serial_transaction(int sstd_index) {
// slave failed to pull the line low, assume not present
dprintf("serial::NO_RESPONSE\n");
chSysUnlock();
- return TRANSACTION_NO_RESPONSE;
+ return false;
}
// if the slave is present syncronize with it
@@ -266,7 +259,7 @@ int soft_serial_transaction(int sstd_index) {
serial_high();
chSysUnlock();
- return TRANSACTION_DATA_ERROR;
+ return false;
}
// always, release the line when not in use
@@ -274,5 +267,5 @@ int soft_serial_transaction(int sstd_index) {
serial_output();
chSysUnlock();
- return TRANSACTION_END;
+ return true;
}
diff --git a/platforms/chibios/drivers/serial_usart.c b/platforms/chibios/drivers/serial_usart.c
index 124e4be685..42c476a374 100644
--- a/platforms/chibios/drivers/serial_usart.c
+++ b/platforms/chibios/drivers/serial_usart.c
@@ -36,7 +36,7 @@ static SerialDriver* serial_driver = &SERIAL_USART_DRIVER;
static inline bool react_to_transactions(void);
static inline bool __attribute__((nonnull)) receive(uint8_t* destination, const size_t size);
static inline bool __attribute__((nonnull)) send(const uint8_t* source, const size_t size);
-static inline int initiate_transaction(uint8_t sstd_index);
+static inline bool initiate_transaction(uint8_t sstd_index);
static inline void usart_clear(void);
/**
@@ -206,14 +206,12 @@ static inline bool react_to_transactions(void) {
to signal that the slave is ready to receive possible transaction buffers */
sstd_index ^= HANDSHAKE_MAGIC;
if (!send(&sstd_index, sizeof(sstd_index))) {
- *trans->status = TRANSACTION_DATA_ERROR;
return false;
}
/* Receive transaction buffer from the master. If this transaction requires it.*/
if (trans->initiator2target_buffer_size) {
if (!receive(split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size)) {
- *trans->status = TRANSACTION_DATA_ERROR;
return false;
}
}
@@ -226,12 +224,10 @@ static inline bool react_to_transactions(void) {
/* Send transaction buffer to the master. If this transaction requires it. */
if (trans->target2initiator_buffer_size) {
if (!send(split_trans_target2initiator_buffer(trans), trans->target2initiator_buffer_size)) {
- *trans->status = TRANSACTION_DATA_ERROR;
return false;
}
}
- *trans->status = TRANSACTION_ACCEPTED;
return true;
}
@@ -252,11 +248,9 @@ void soft_serial_initiator_init(void) {
* @brief Start transaction from the master half to the slave half.
*
* @param index Transaction Table index of the transaction to start.
- * @return int TRANSACTION_NO_RESPONSE in case of Timeout.
- * TRANSACTION_TYPE_ERROR in case of invalid transaction index.
- * TRANSACTION_END in case of success.
+ * @return bool Indicates success of transaction.
*/
-int soft_serial_transaction(int index) {
+bool soft_serial_transaction(int index) {
/* Clear the receive queue, to start with a clean slate.
* Parts of failed transactions or spurious bytes could still be in it. */
usart_clear();
@@ -266,25 +260,19 @@ int soft_serial_transaction(int index) {
/**
* @brief Initiate transaction to slave half.
*/
-static inline int initiate_transaction(uint8_t sstd_index) {
+static inline bool initiate_transaction(uint8_t sstd_index) {
/* Sanity check that we are actually starting a valid transaction. */
if (sstd_index >= NUM_TOTAL_TRANSACTIONS) {
dprintln("USART: Illegal transaction Id.");
- return TRANSACTION_TYPE_ERROR;
+ return false;
}
split_transaction_desc_t* trans = &split_transaction_table[sstd_index];
- /* Transaction is not registered. Abort. */
- if (!trans->status) {
- dprintln("USART: Transaction not registered.");
- return TRANSACTION_TYPE_ERROR;
- }
-
/* Send transaction table index to the slave, which doubles as basic handshake token. */
if (!send(&sstd_index, sizeof(sstd_index))) {
dprintln("USART: Send Handshake failed.");
- return TRANSACTION_TYPE_ERROR;
+ return false;
}
uint8_t sstd_index_shake = 0xFF;
@@ -295,14 +283,14 @@ static inline int initiate_transaction(uint8_t sstd_index) {
*/
if (!receive(&sstd_index_shake, sizeof(sstd_index_shake)) || (sstd_index_shake != (sstd_index ^ HANDSHAKE_MAGIC))) {
dprintln("USART: Handshake failed.");
- return TRANSACTION_NO_RESPONSE;
+ return false;
}
/* Send transaction buffer to the slave. If this transaction requires it. */
if (trans->initiator2target_buffer_size) {
if (!send(split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size)) {
dprintln("USART: Send failed.");
- return TRANSACTION_NO_RESPONSE;
+ return false;
}
}
@@ -310,9 +298,9 @@ static inline int initiate_transaction(uint8_t sstd_index) {
if (trans->target2initiator_buffer_size) {
if (!receive(split_trans_target2initiator_buffer(trans), trans->target2initiator_buffer_size)) {
dprintln("USART: Receive failed.");
- return TRANSACTION_NO_RESPONSE;
+ return false;
}
}
- return TRANSACTION_END;
+ return true;
}
diff --git a/platforms/chibios/eeprom_stm32.c b/platforms/chibios/eeprom_stm32.c
index acc6a48516..8bf0b19c3d 100644
--- a/platforms/chibios/eeprom_stm32.c
+++ b/platforms/chibios/eeprom_stm32.c
@@ -133,10 +133,6 @@
*/
#include "eeprom_stm32_defs.h"
-#if !defined(FEE_PAGE_SIZE) || !defined(FEE_PAGE_COUNT) || !defined(FEE_MCU_FLASH_SIZE) || !defined(FEE_PAGE_BASE_ADDRESS)
-# error "not implemented."
-#endif
-
/* These bits are used for optimizing encoding of bytes, 0 and 1 */
#define FEE_WORD_ENCODING 0x8000
#define FEE_VALUE_NEXT 0x6000
@@ -144,69 +140,11 @@
#define FEE_VALUE_ENCODED 0x2000
#define FEE_BYTE_RANGE 0x80
-/* Addressable range 16KByte: 0 <-> (0x1FFF << 1) */
-#define FEE_ADDRESS_MAX_SIZE 0x4000
-
/* Flash word value after erase */
#define FEE_EMPTY_WORD ((uint16_t)0xFFFF)
-/* Size of combined compacted eeprom and write log pages */
-#define FEE_DENSITY_MAX_SIZE (FEE_PAGE_COUNT * FEE_PAGE_SIZE)
-
-#ifndef FEE_MCU_FLASH_SIZE_IGNORE_CHECK /* *TODO: Get rid of this check */
-# if FEE_DENSITY_MAX_SIZE > (FEE_MCU_FLASH_SIZE * 1024)
-# pragma message STR(FEE_DENSITY_MAX_SIZE) " > " STR(FEE_MCU_FLASH_SIZE * 1024)
-# error emulated eeprom: FEE_DENSITY_MAX_SIZE is greater than available flash size
-# endif
-#endif
-
-/* Size of emulated eeprom */
-#ifdef FEE_DENSITY_BYTES
-# if (FEE_DENSITY_BYTES > FEE_DENSITY_MAX_SIZE)
-# pragma message STR(FEE_DENSITY_BYTES) " > " STR(FEE_DENSITY_MAX_SIZE)
-# error emulated eeprom: FEE_DENSITY_BYTES exceeds FEE_DENSITY_MAX_SIZE
-# endif
-# if (FEE_DENSITY_BYTES == FEE_DENSITY_MAX_SIZE)
-# pragma message STR(FEE_DENSITY_BYTES) " == " STR(FEE_DENSITY_MAX_SIZE)
-# warning emulated eeprom: FEE_DENSITY_BYTES leaves no room for a write log. This will greatly increase the flash wear rate!
-# endif
-# if FEE_DENSITY_BYTES > FEE_ADDRESS_MAX_SIZE
-# pragma message STR(FEE_DENSITY_BYTES) " > " STR(FEE_ADDRESS_MAX_SIZE)
-# error emulated eeprom: FEE_DENSITY_BYTES is greater than FEE_ADDRESS_MAX_SIZE allows
-# endif
-# if ((FEE_DENSITY_BYTES) % 2) == 1
-# error emulated eeprom: FEE_DENSITY_BYTES must be even
-# endif
-#else
-/* Default to half of allocated space used for emulated eeprom, half for write log */
-# define FEE_DENSITY_BYTES (FEE_PAGE_COUNT * FEE_PAGE_SIZE / 2)
-#endif
-
-/* Size of write log */
-#ifdef FEE_WRITE_LOG_BYTES
-# if ((FEE_DENSITY_BYTES + FEE_WRITE_LOG_BYTES) > FEE_DENSITY_MAX_SIZE)
-# pragma message STR(FEE_DENSITY_BYTES) " + " STR(FEE_WRITE_LOG_BYTES) " > " STR(FEE_DENSITY_MAX_SIZE)
-# error emulated eeprom: FEE_WRITE_LOG_BYTES exceeds remaining FEE_DENSITY_MAX_SIZE
-# endif
-# if ((FEE_WRITE_LOG_BYTES) % 2) == 1
-# error emulated eeprom: FEE_WRITE_LOG_BYTES must be even
-# endif
-#else
-/* Default to use all remaining space */
-# define FEE_WRITE_LOG_BYTES (FEE_PAGE_COUNT * FEE_PAGE_SIZE - FEE_DENSITY_BYTES)
-#endif
-
-/* Start of the emulated eeprom compacted flash area */
-#define FEE_COMPACTED_BASE_ADDRESS FEE_PAGE_BASE_ADDRESS
-/* End of the emulated eeprom compacted flash area */
-#define FEE_COMPACTED_LAST_ADDRESS (FEE_COMPACTED_BASE_ADDRESS + FEE_DENSITY_BYTES)
-/* Start of the emulated eeprom write log */
-#define FEE_WRITE_LOG_BASE_ADDRESS FEE_COMPACTED_LAST_ADDRESS
-/* End of the emulated eeprom write log */
-#define FEE_WRITE_LOG_LAST_ADDRESS (FEE_WRITE_LOG_BASE_ADDRESS + FEE_WRITE_LOG_BYTES)
-
-#if defined(DYNAMIC_KEYMAP_EEPROM_MAX_ADDR) && (DYNAMIC_KEYMAP_EEPROM_MAX_ADDR >= FEE_DENSITY_BYTES)
-# error emulated eeprom: DYNAMIC_KEYMAP_EEPROM_MAX_ADDR is greater than the FEE_DENSITY_BYTES available
+#if !defined(FEE_PAGE_SIZE) || !defined(FEE_PAGE_COUNT) || !defined(FEE_MCU_FLASH_SIZE) || !defined(FEE_PAGE_BASE_ADDRESS)
+# error "not implemented."
#endif
/* In-memory contents of emulated eeprom for faster access */
diff --git a/platforms/chibios/eeprom_stm32_defs.h b/platforms/chibios/eeprom_stm32_defs.h
index 66904f247f..581434eb5e 100644
--- a/platforms/chibios/eeprom_stm32_defs.h
+++ b/platforms/chibios/eeprom_stm32_defs.h
@@ -72,3 +72,65 @@
# define FEE_PAGE_BASE_ADDRESS ((uintptr_t)(FEE_FLASH_BASE) + FEE_MCU_FLASH_SIZE * 1024 - (FEE_PAGE_COUNT * FEE_PAGE_SIZE))
# endif
#endif
+
+/* Addressable range 16KByte: 0 <-> (0x1FFF << 1) */
+#define FEE_ADDRESS_MAX_SIZE 0x4000
+
+/* Size of combined compacted eeprom and write log pages */
+#define FEE_DENSITY_MAX_SIZE (FEE_PAGE_COUNT * FEE_PAGE_SIZE)
+
+#ifndef FEE_MCU_FLASH_SIZE_IGNORE_CHECK /* *TODO: Get rid of this check */
+# if FEE_DENSITY_MAX_SIZE > (FEE_MCU_FLASH_SIZE * 1024)
+# pragma message STR(FEE_DENSITY_MAX_SIZE) " > " STR(FEE_MCU_FLASH_SIZE * 1024)
+# error emulated eeprom: FEE_DENSITY_MAX_SIZE is greater than available flash size
+# endif
+#endif
+
+/* Size of emulated eeprom */
+#ifdef FEE_DENSITY_BYTES
+# if (FEE_DENSITY_BYTES > FEE_DENSITY_MAX_SIZE)
+# pragma message STR(FEE_DENSITY_BYTES) " > " STR(FEE_DENSITY_MAX_SIZE)
+# error emulated eeprom: FEE_DENSITY_BYTES exceeds FEE_DENSITY_MAX_SIZE
+# endif
+# if (FEE_DENSITY_BYTES == FEE_DENSITY_MAX_SIZE)
+# pragma message STR(FEE_DENSITY_BYTES) " == " STR(FEE_DENSITY_MAX_SIZE)
+# warning emulated eeprom: FEE_DENSITY_BYTES leaves no room for a write log. This will greatly increase the flash wear rate!
+# endif
+# if FEE_DENSITY_BYTES > FEE_ADDRESS_MAX_SIZE
+# pragma message STR(FEE_DENSITY_BYTES) " > " STR(FEE_ADDRESS_MAX_SIZE)
+# error emulated eeprom: FEE_DENSITY_BYTES is greater than FEE_ADDRESS_MAX_SIZE allows
+# endif
+# if ((FEE_DENSITY_BYTES) % 2) == 1
+# error emulated eeprom: FEE_DENSITY_BYTES must be even
+# endif
+#else
+/* Default to half of allocated space used for emulated eeprom, half for write log */
+# define FEE_DENSITY_BYTES (FEE_PAGE_COUNT * FEE_PAGE_SIZE / 2)
+#endif
+
+/* Size of write log */
+#ifdef FEE_WRITE_LOG_BYTES
+# if ((FEE_DENSITY_BYTES + FEE_WRITE_LOG_BYTES) > FEE_DENSITY_MAX_SIZE)
+# pragma message STR(FEE_DENSITY_BYTES) " + " STR(FEE_WRITE_LOG_BYTES) " > " STR(FEE_DENSITY_MAX_SIZE)
+# error emulated eeprom: FEE_WRITE_LOG_BYTES exceeds remaining FEE_DENSITY_MAX_SIZE
+# endif
+# if ((FEE_WRITE_LOG_BYTES) % 2) == 1
+# error emulated eeprom: FEE_WRITE_LOG_BYTES must be even
+# endif
+#else
+/* Default to use all remaining space */
+# define FEE_WRITE_LOG_BYTES (FEE_PAGE_COUNT * FEE_PAGE_SIZE - FEE_DENSITY_BYTES)
+#endif
+
+/* Start of the emulated eeprom compacted flash area */
+#define FEE_COMPACTED_BASE_ADDRESS FEE_PAGE_BASE_ADDRESS
+/* End of the emulated eeprom compacted flash area */
+#define FEE_COMPACTED_LAST_ADDRESS (FEE_COMPACTED_BASE_ADDRESS + FEE_DENSITY_BYTES)
+/* Start of the emulated eeprom write log */
+#define FEE_WRITE_LOG_BASE_ADDRESS FEE_COMPACTED_LAST_ADDRESS
+/* End of the emulated eeprom write log */
+#define FEE_WRITE_LOG_LAST_ADDRESS (FEE_WRITE_LOG_BASE_ADDRESS + FEE_WRITE_LOG_BYTES)
+
+#if defined(DYNAMIC_KEYMAP_EEPROM_MAX_ADDR) && (DYNAMIC_KEYMAP_EEPROM_MAX_ADDR >= FEE_DENSITY_BYTES)
+# error emulated eeprom: DYNAMIC_KEYMAP_EEPROM_MAX_ADDR is greater than the FEE_DENSITY_BYTES available
+#endif
diff --git a/platforms/chibios/eeprom_teensy.c b/platforms/chibios/eeprom_teensy.c
index 4aaf665269..575f51526e 100644
--- a/platforms/chibios/eeprom_teensy.c
+++ b/platforms/chibios/eeprom_teensy.c
@@ -1,6 +1,7 @@
#include <ch.h>
#include <hal.h>
+#include "eeprom_teensy.h"
#include "eeconfig.h"
/*************************************/
@@ -42,18 +43,6 @@
#if defined(K20x) /* chip selection */
/* Teensy 3.0, 3.1, 3.2; mchck; infinity keyboard */
-// The EEPROM is really RAM with a hardware-based backup system to
-// flash memory. Selecting a smaller size EEPROM allows more wear
-// leveling, for higher write endurance. If you edit this file,
-// set this to the smallest size your application can use. Also,
-// due to Freescale's implementation, writing 16 or 32 bit words
-// (aligned to 2 or 4 byte boundaries) has twice the endurance
-// compared to writing 8 bit bytes.
-//
-# ifndef EEPROM_SIZE
-# define EEPROM_SIZE 32
-# endif
-
/*
^^^ Here be dragons:
NXP AppNote AN4282 section 3.1 states that partitioning must only be done once.
@@ -350,8 +339,6 @@ void do_flash_cmd(volatile uint8_t *fstat)
extern uint32_t __eeprom_workarea_start__;
extern uint32_t __eeprom_workarea_end__;
-# define EEPROM_SIZE 128
-
static uint32_t flashend = 0;
void eeprom_initialize(void) {
@@ -524,64 +511,7 @@ void eeprom_write_block(const void *buf, void *addr, uint32_t len) {
}
#else
-// No EEPROM supported, so emulate it
-
-# ifndef EEPROM_SIZE
-# include "eeconfig.h"
-# define EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4) // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO
-# endif
-__attribute__((aligned(4))) static uint8_t buffer[EEPROM_SIZE];
-
-uint8_t eeprom_read_byte(const uint8_t *addr) {
- uint32_t offset = (uint32_t)addr;
- return buffer[offset];
-}
-
-void eeprom_write_byte(uint8_t *addr, uint8_t value) {
- uint32_t offset = (uint32_t)addr;
- buffer[offset] = value;
-}
-
-uint16_t eeprom_read_word(const uint16_t *addr) {
- const uint8_t *p = (const uint8_t *)addr;
- return eeprom_read_byte(p) | (eeprom_read_byte(p + 1) << 8);
-}
-
-uint32_t eeprom_read_dword(const uint32_t *addr) {
- const uint8_t *p = (const uint8_t *)addr;
- return eeprom_read_byte(p) | (eeprom_read_byte(p + 1) << 8) | (eeprom_read_byte(p + 2) << 16) | (eeprom_read_byte(p + 3) << 24);
-}
-
-void eeprom_read_block(void *buf, const void *addr, size_t len) {
- const uint8_t *p = (const uint8_t *)addr;
- uint8_t * dest = (uint8_t *)buf;
- while (len--) {
- *dest++ = eeprom_read_byte(p++);
- }
-}
-
-void eeprom_write_word(uint16_t *addr, uint16_t value) {
- uint8_t *p = (uint8_t *)addr;
- eeprom_write_byte(p++, value);
- eeprom_write_byte(p, value >> 8);
-}
-
-void eeprom_write_dword(uint32_t *addr, uint32_t value) {
- uint8_t *p = (uint8_t *)addr;
- eeprom_write_byte(p++, value);
- eeprom_write_byte(p++, value >> 8);
- eeprom_write_byte(p++, value >> 16);
- eeprom_write_byte(p, value >> 24);
-}
-
-void eeprom_write_block(const void *buf, void *addr, size_t len) {
- uint8_t * p = (uint8_t *)addr;
- const uint8_t *src = (const uint8_t *)buf;
- while (len--) {
- eeprom_write_byte(p++, *src++);
- }
-}
-
+# error Unsupported Teensy EEPROM.
#endif /* chip selection */
// The update functions just calls write for now, but could probably be optimized
diff --git a/platforms/chibios/eeprom_teensy.h b/platforms/chibios/eeprom_teensy.h
new file mode 100755
index 0000000000..9a14a1fa79
--- /dev/null
+++ b/platforms/chibios/eeprom_teensy.h
@@ -0,0 +1,25 @@
+// Copyright 2022 Nick Brassel (@tzarc)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#include <ch.h>
+#include <hal.h>
+
+#if defined(K20x)
+/* Teensy 3.0, 3.1, 3.2; mchck; infinity keyboard */
+// The EEPROM is really RAM with a hardware-based backup system to
+// flash memory. Selecting a smaller size EEPROM allows more wear
+// leveling, for higher write endurance. If you edit this file,
+// set this to the smallest size your application can use. Also,
+// due to Freescale's implementation, writing 16 or 32 bit words
+// (aligned to 2 or 4 byte boundaries) has twice the endurance
+// compared to writing 8 bit bytes.
+//
+# ifndef EEPROM_SIZE
+# define EEPROM_SIZE 32
+# endif
+#elif defined(KL2x) /* Teensy LC (emulated) */
+# define EEPROM_SIZE 128
+#else
+# error Unsupported Teensy EEPROM.
+#endif
diff --git a/platforms/chibios/gpio.h b/platforms/chibios/gpio.h
index 4d057f1cab..eb44a18f9c 100644
--- a/platforms/chibios/gpio.h
+++ b/platforms/chibios/gpio.h
@@ -22,10 +22,12 @@ typedef ioline_t pin_t;
/* Operation of GPIO by pin. */
-#define setPinInput(pin) palSetLineMode(pin, PAL_MODE_INPUT)
-#define setPinInputHigh(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)
-#define setPinInputLow(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)
-#define setPinOutput(pin) palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)
+#define setPinInput(pin) palSetLineMode((pin), PAL_MODE_INPUT)
+#define setPinInputHigh(pin) palSetLineMode((pin), PAL_MODE_INPUT_PULLUP)
+#define setPinInputLow(pin) palSetLineMode((pin), PAL_MODE_INPUT_PULLDOWN)
+#define setPinOutputPushPull(pin) palSetLineMode((pin), PAL_MODE_OUTPUT_PUSHPULL)
+#define setPinOutputOpenDrain(pin) palSetLineMode((pin), PAL_MODE_OUTPUT_OPENDRAIN)
+#define setPinOutput(pin) setPinOutputPushPull(pin)
#define writePinHigh(pin) palSetLine(pin)
#define writePinLow(pin) palClearLine(pin)
@@ -34,17 +36,3 @@ typedef ioline_t pin_t;
#define readPin(pin) palReadLine(pin)
#define togglePin(pin) palToggleLine(pin)
-
-/* Operation of GPIO by port. */
-
-typedef uint16_t port_data_t;
-
-#define readPort(pin) palReadPort(PAL_PORT(pin))
-
-#define setPortBitInput(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT)
-#define setPortBitInputHigh(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT_PULLUP)
-#define setPortBitInputLow(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT_PULLDOWN)
-#define setPortBitOutput(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_OUTPUT_PUSHPULL)
-
-#define writePortBitLow(pin, bit) palClearLine(PAL_LINE(PAL_PORT(pin), bit))
-#define writePortBitHigh(pin, bit) palSetLine(PAL_LINE(PAL_PORT(pin), bit))
diff --git a/platforms/chibios/platform.mk b/platforms/chibios/platform.mk
index 45e3377882..6fd1fd83f5 100644
--- a/platforms/chibios/platform.mk
+++ b/platforms/chibios/platform.mk
@@ -344,7 +344,7 @@ ifeq ($(strip $(MCU)), risc-v)
ifneq ($(shell which riscv64-unknown-elf-gcc 2>/dev/null),)
TOOLCHAIN = riscv64-unknown-elf-
else
- $(error "No RISC-V toolchain found. Can't find riscv32-unknown-elf-gcc or riscv64-unknown-elf-gcc found in your systems PATH variable. Please install a valid toolchain and make it accessible!")
+ $(call CATASTROPHIC_ERROR,Missing toolchain,No RISC-V toolchain found. Can't find riscv32-unknown-elf-gcc or riscv64-unknown-elf-gcc found in your systems PATH variable. Please install a valid toolchain and make it accessible!)
endif
endif
endif
diff --git a/platforms/chibios/suspend.c b/platforms/chibios/suspend.c
index 9310a99920..ce03433e3a 100644
--- a/platforms/chibios/suspend.c
+++ b/platforms/chibios/suspend.c
@@ -13,15 +13,6 @@
#include "led.h"
#include "wait.h"
-/** \brief suspend idle
- *
- * FIXME: needs doc
- */
-void suspend_idle(uint8_t time) {
- // TODO: this is not used anywhere - what units is 'time' in?
- wait_ms(time);
-}
-
/** \brief suspend power down
*
* FIXME: needs doc
@@ -36,34 +27,6 @@ void suspend_power_down(void) {
/** \brief suspend wakeup condition
*
- * FIXME: needs doc
- */
-__attribute__((weak)) void matrix_power_up(void) {}
-__attribute__((weak)) void matrix_power_down(void) {}
-bool suspend_wakeup_condition(void) {
- matrix_power_up();
- matrix_scan();
- matrix_power_down();
- for (uint8_t r = 0; r < MATRIX_ROWS; r++) {
- if (matrix_get_row(r)) return true;
- }
- return false;
-}
-
-/** \brief run user level code immediately after wakeup
- *
- * FIXME: needs doc
- */
-__attribute__((weak)) void suspend_wakeup_init_user(void) {}
-
-/** \brief run keyboard level code immediately after wakeup
- *
- * FIXME: needs doc
- */
-__attribute__((weak)) void suspend_wakeup_init_kb(void) { suspend_wakeup_init_user(); }
-
-/** \brief suspend wakeup condition
- *
* run immediately after wakeup
* FIXME: needs doc
*/
diff --git a/platforms/chibios/timer.c b/platforms/chibios/timer.c
index 9f664e1f79..74fdd7a6fc 100644
--- a/platforms/chibios/timer.c
+++ b/platforms/chibios/timer.c
@@ -2,44 +2,98 @@
#include "timer.h"
-static uint32_t reset_point = 0;
+static uint32_t ticks_offset = 0;
+static uint32_t last_ticks = 0;
+static uint32_t ms_offset = 0;
#if CH_CFG_ST_RESOLUTION < 32
static uint32_t last_systime = 0;
static uint32_t overflow = 0;
#endif
-void timer_init(void) { timer_clear(); }
-
-void timer_clear(void) {
- reset_point = (uint32_t)chVTGetSystemTime();
-#if CH_CFG_ST_RESOLUTION < 32
- last_systime = reset_point;
- overflow = 0;
-#endif
-}
-
-uint16_t timer_read(void) { return (uint16_t)timer_read32(); }
-
-uint32_t timer_read32(void) {
- uint32_t systime = (uint32_t)chVTGetSystemTime();
+// Get the current system time in ticks as a 32-bit number.
+// This function must be called from within a system lock zone (so that it can safely use and update the static data).
+static inline uint32_t get_system_time_ticks(void) {
+ uint32_t systime = (uint32_t)chVTGetSystemTimeX();
#if CH_CFG_ST_RESOLUTION < 32
- // If/when we need to support 64-bit chips, this may need to be modified to match the native bit-ness of the MCU.
- // At this point, the only SysTick resolution allowed other than 32 is 16 bit.
- // In the 16-bit case, at:
+ // If the real system timer resolution is less than 32 bits, provide the missing bits by checking for the counter
+ // overflow. For this to work, this function must be called at least once for every overflow of the system timer.
+ // In the 16-bit case, the corresponding times are:
// - CH_CFG_ST_FREQUENCY = 100000, overflow will occur every ~0.65 seconds
// - CH_CFG_ST_FREQUENCY = 10000, overflow will occur every ~6.5 seconds
// - CH_CFG_ST_FREQUENCY = 1000, overflow will occur every ~65 seconds
- // With this implementation, as long as we ensure a timer read happens at least once during the overflow period, timing should be accurate.
if (systime < last_systime) {
overflow += ((uint32_t)1) << CH_CFG_ST_RESOLUTION;
}
-
last_systime = systime;
- return (uint32_t)TIME_I2MS(systime - reset_point + overflow);
-#else
- return (uint32_t)TIME_I2MS(systime - reset_point);
+ systime += overflow;
#endif
+
+ return systime;
+}
+
+#if CH_CFG_ST_RESOLUTION < 32
+static virtual_timer_t update_timer;
+
+// Update the system tick counter every half of the timer overflow period; this should keep the tick counter correct
+// even if something blocks timer interrupts for 1/2 of the timer overflow period.
+# define UPDATE_INTERVAL (((sysinterval_t)1) << (CH_CFG_ST_RESOLUTION - 1))
+
+// VT callback function to keep the overflow bits of the system tick counter updated.
+static void update_fn(void *arg) {
+ (void)arg;
+ chSysLockFromISR();
+ get_system_time_ticks();
+ chVTSetI(&update_timer, UPDATE_INTERVAL, update_fn, NULL);
+ chSysUnlockFromISR();
+}
+#endif
+
+// The highest multiple of CH_CFG_ST_FREQUENCY that fits into uint32_t. This number of ticks will necessarily
+// correspond to some integer number of seconds.
+#define OVERFLOW_ADJUST_TICKS ((uint32_t)((UINT32_MAX / CH_CFG_ST_FREQUENCY) * CH_CFG_ST_FREQUENCY))
+
+// The time in milliseconds which corresponds to OVERFLOW_ADJUST_TICKS ticks (this is a precise conversion, because
+// OVERFLOW_ADJUST_TICKS corresponds to an integer number of seconds).
+#define OVERFLOW_ADJUST_MS (TIME_I2MS(OVERFLOW_ADJUST_TICKS))
+
+void timer_init(void) {
+ timer_clear();
+#if CH_CFG_ST_RESOLUTION < 32
+ chVTObjectInit(&update_timer);
+ chVTSet(&update_timer, UPDATE_INTERVAL, update_fn, NULL);
+#endif
+}
+
+void timer_clear(void) {
+ chSysLock();
+ ticks_offset = get_system_time_ticks();
+ last_ticks = 0;
+ ms_offset = 0;
+ chSysUnlock();
+}
+
+uint16_t timer_read(void) { return (uint16_t)timer_read32(); }
+
+uint32_t timer_read32(void) {
+ chSysLock();
+ uint32_t ticks = get_system_time_ticks() - ticks_offset;
+ if (ticks < last_ticks) {
+ // The 32-bit tick counter overflowed and wrapped around. We cannot just extend the counter to 64 bits here,
+ // because TIME_I2MS() may encounter overflows when handling a 64-bit argument; therefore the solution here is
+ // to subtract a reasonably large number of ticks from the tick counter to bring its value below the 32-bit
+ // limit again, and then add the equivalent number of milliseconds to the converted value. (Adjusting just the
+ // converted value to account for 2**32 ticks is not possible in general, because 2**32 ticks may not correspond
+ // to an integer number of milliseconds).
+ ticks -= OVERFLOW_ADJUST_TICKS;
+ ticks_offset += OVERFLOW_ADJUST_TICKS;
+ ms_offset += OVERFLOW_ADJUST_MS;
+ }
+ last_ticks = ticks;
+ uint32_t ms_offset_copy = ms_offset; // read while still holding the lock to ensure a consistent value
+ chSysUnlock();
+
+ return (uint32_t)TIME_I2MS(ticks) + ms_offset_copy;
}
uint16_t timer_elapsed(uint16_t last) { return TIMER_DIFF_16(timer_read(), last); }
diff --git a/platforms/common.mk b/platforms/common.mk
index f7a0fc7028..2a1fc8d377 100644
--- a/platforms/common.mk
+++ b/platforms/common.mk
@@ -1,10 +1,11 @@
PLATFORM_COMMON_DIR = $(PLATFORM_PATH)/$(PLATFORM_KEY)
TMK_COMMON_SRC += \
+ $(PLATFORM_PATH)/suspend.c \
$(PLATFORM_COMMON_DIR)/platform.c \
$(PLATFORM_COMMON_DIR)/suspend.c \
$(PLATFORM_COMMON_DIR)/timer.c \
- $(PLATFORM_COMMON_DIR)/bootloader.c \
+ $(PLATFORM_COMMON_DIR)/bootloaders/$(BOOTLOADER_TYPE).c
# Search Path
VPATH += $(PLATFORM_PATH)
diff --git a/platforms/eeprom.h b/platforms/eeprom.h
index f5b3f0ad53..091e6e4400 100644
--- a/platforms/eeprom.h
+++ b/platforms/eeprom.h
@@ -1,3 +1,5 @@
+// Copyright 2018-2022 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#if defined(__AVR__) && !defined(EEPROM_DRIVER)
@@ -19,3 +21,50 @@ void eeprom_update_word(uint16_t *__p, uint16_t __value);
void eeprom_update_dword(uint32_t *__p, uint32_t __value);
void eeprom_update_block(const void *__src, void *__dst, size_t __n);
#endif
+
+#if defined(EEPROM_CUSTOM)
+# ifndef EEPROM_SIZE
+# error EEPROM_SIZE has not been defined for custom driver.
+# endif
+# define TOTAL_EEPROM_BYTE_COUNT (EEPROM_SIZE)
+#elif defined(EEPROM_TRANSIENT)
+# include "eeprom_transient.h"
+# define TOTAL_EEPROM_BYTE_COUNT (TRANSIENT_EEPROM_SIZE)
+#elif defined(EEPROM_I2C)
+# include "eeprom_i2c.h"
+# define TOTAL_EEPROM_BYTE_COUNT (EXTERNAL_EEPROM_BYTE_COUNT)
+#elif defined(EEPROM_SPI)
+# include "eeprom_spi.h"
+# define TOTAL_EEPROM_BYTE_COUNT (EXTERNAL_EEPROM_BYTE_COUNT)
+#elif defined(EEPROM_STM32_L0_L1)
+# include "eeprom_stm32_L0_L1.h"
+# define TOTAL_EEPROM_BYTE_COUNT (STM32_ONBOARD_EEPROM_SIZE)
+#elif defined(EEPROM_TEENSY)
+# include "eeprom_teensy.h"
+# define TOTAL_EEPROM_BYTE_COUNT (EEPROM_SIZE)
+#elif defined(EEPROM_STM32_FLASH_EMULATED)
+# include "eeprom_stm32_defs.h"
+# define TOTAL_EEPROM_BYTE_COUNT (FEE_DENSITY_BYTES)
+#elif defined(EEPROM_SAMD)
+# include "eeprom_samd.h"
+# define TOTAL_EEPROM_BYTE_COUNT (EEPROM_SIZE)
+#elif defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_AT90USB162__) || defined(__AVR_ATtiny85__)
+# define TOTAL_EEPROM_BYTE_COUNT 512
+#elif defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega32A__)
+# define TOTAL_EEPROM_BYTE_COUNT 1024
+#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__)
+# define TOTAL_EEPROM_BYTE_COUNT 2048
+#elif defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
+# define TOTAL_EEPROM_BYTE_COUNT 4096
+#elif defined(EEPROM_TEST_HARNESS)
+# ifndef FLASH_STM32_MOCKED
+// Normal tests
+# define TOTAL_EEPROM_BYTE_COUNT 32
+# else
+// Flash wear-leveling testing
+# include "eeprom_stm32_tests.h"
+# define TOTAL_EEPROM_BYTE_COUNT (EEPROM_SIZE)
+# endif
+#else
+# error Unknown EEPROM driver.
+#endif
diff --git a/platforms/suspend.c b/platforms/suspend.c
new file mode 100644
index 0000000000..cd773764fa
--- /dev/null
+++ b/platforms/suspend.c
@@ -0,0 +1,47 @@
+// Copyright 2022 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "suspend.h"
+#include "matrix.h"
+
+// TODO: Move to more correct location
+__attribute__((weak)) void matrix_power_up(void) {}
+__attribute__((weak)) void matrix_power_down(void) {}
+
+/** \brief Run user level Power down
+ *
+ * FIXME: needs doc
+ */
+__attribute__((weak)) void suspend_power_down_user(void) {}
+
+/** \brief Run keyboard level Power down
+ *
+ * FIXME: needs doc
+ */
+__attribute__((weak)) void suspend_power_down_kb(void) { suspend_power_down_user(); }
+
+/** \brief run user level code immediately after wakeup
+ *
+ * FIXME: needs doc
+ */
+__attribute__((weak)) void suspend_wakeup_init_user(void) {}
+
+/** \brief run keyboard level code immediately after wakeup
+ *
+ * FIXME: needs doc
+ */
+__attribute__((weak)) void suspend_wakeup_init_kb(void) { suspend_wakeup_init_user(); }
+
+/** \brief suspend wakeup condition
+ *
+ * FIXME: needs doc
+ */
+bool suspend_wakeup_condition(void) {
+ matrix_power_up();
+ matrix_scan();
+ matrix_power_down();
+ for (uint8_t r = 0; r < MATRIX_ROWS; r++) {
+ if (matrix_get_row(r)) return true;
+ }
+ return false;
+}
diff --git a/platforms/suspend.h b/platforms/suspend.h
index 081735f90e..e4f7f39ddb 100644
--- a/platforms/suspend.h
+++ b/platforms/suspend.h
@@ -3,7 +3,6 @@
#include <stdint.h>
#include <stdbool.h>
-void suspend_idle(uint8_t timeout);
void suspend_power_down(void);
bool suspend_wakeup_condition(void);
void suspend_wakeup_init(void);
diff --git a/platforms/test/bootloader.c b/platforms/test/bootloaders/none.c
index 5155d9ff04..5155d9ff04 100644
--- a/platforms/test/bootloader.c
+++ b/platforms/test/bootloaders/none.c
diff --git a/platforms/test/eeprom.c b/platforms/test/eeprom.c
index 5c8e69dae3..e292faa644 100644
--- a/platforms/test/eeprom.c
+++ b/platforms/test/eeprom.c
@@ -16,9 +16,7 @@
#include "eeprom.h"
-#define EEPROM_SIZE 32
-
-static uint8_t buffer[EEPROM_SIZE];
+static uint8_t buffer[TOTAL_EEPROM_BYTE_COUNT];
uint8_t eeprom_read_byte(const uint8_t *addr) {
uintptr_t offset = (uintptr_t)addr;
diff --git a/platforms/test/eeprom_stm32_tests.cpp b/platforms/test/eeprom_stm32_tests.cpp
index 5bc8d87900..57f31d634f 100644
--- a/platforms/test/eeprom_stm32_tests.cpp
+++ b/platforms/test/eeprom_stm32_tests.cpp
@@ -17,8 +17,6 @@
#include "gtest/gtest.h"
extern "C" {
-#include "flash_stm32.h"
-#include "eeprom_stm32.h"
#include "eeprom.h"
}
@@ -46,7 +44,6 @@ extern "C" {
*
*/
-#define EEPROM_SIZE (FEE_PAGE_SIZE * FEE_PAGE_COUNT / 2)
#define LOG_SIZE EEPROM_SIZE
#define LOG_BASE (MOCK_FLASH_SIZE - LOG_SIZE)
#define EEPROM_BASE (LOG_BASE - EEPROM_SIZE)
diff --git a/platforms/test/eeprom_stm32_tests.h b/platforms/test/eeprom_stm32_tests.h
new file mode 100644
index 0000000000..35ed885e52
--- /dev/null
+++ b/platforms/test/eeprom_stm32_tests.h
@@ -0,0 +1,8 @@
+// Copyright 2018-2022 Nick Brassel (@tzarc)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#include "flash_stm32.h"
+#include "eeprom_stm32.h"
+
+#define EEPROM_SIZE (FEE_PAGE_SIZE * FEE_PAGE_COUNT / 2)
diff --git a/platforms/test/rules.mk b/platforms/test/rules.mk
index 66b853d8ee..55512c7392 100644
--- a/platforms/test/rules.mk
+++ b/platforms/test/rules.mk
@@ -1,4 +1,4 @@
-eeprom_stm32_DEFS := -DFLASH_STM32_MOCKED -DNO_PRINT -DFEE_FLASH_BASE=FlashBuf
+eeprom_stm32_DEFS := -DEEPROM_TEST_HARNESS -DFLASH_STM32_MOCKED -DNO_PRINT -DFEE_FLASH_BASE=FlashBuf
eeprom_stm32_tiny_DEFS := $(eeprom_stm32_DEFS) \
-DFEE_MCU_FLASH_SIZE=1 \
-DMOCK_FLASH_SIZE=1024 \