diff options
Diffstat (limited to 'platforms/chibios')
11 files changed, 948 insertions, 5 deletions
diff --git a/platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xC_tinyuf2.ld b/platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xC_tinyuf2.ld new file mode 100644 index 0000000000..82253d3de5 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xC_tinyuf2.ld @@ -0,0 +1,89 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F411xC memory setup. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000 + 64k, len = 256k - 64k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */ + flash1 (rx) : org = 0x00000000, len = 0 + flash2 (rx) : org = 0x00000000, len = 0 + flash3 (rx) : org = 0x00000000, len = 0 + flash4 (rx) : org = 0x00000000, len = 0 + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 128k + ram1 (wx) : org = 0x00000000, len = 0 + ram2 (wx) : org = 0x00000000, len = 0 + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x00000000, len = 0 + ram5 (wx) : org = 0x00000000, len = 0 + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash0); +REGION_ALIAS("XTORS_FLASH_LMA", flash0); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash0); +REGION_ALIAS("TEXT_FLASH_LMA", flash0); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash0); +REGION_ALIAS("RODATA_FLASH_LMA", flash0); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash0); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash0); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld + +/* TinyUF2 bootloader reset support */ +_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */ + diff --git a/platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xE_tinyuf2.ld b/platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xE_tinyuf2.ld new file mode 100644 index 0000000000..1656c67bf7 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xE_tinyuf2.ld @@ -0,0 +1,89 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F411xE memory setup. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000 + 64k, len = 512k - 64k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */ + flash1 (rx) : org = 0x00000000, len = 0 + flash2 (rx) : org = 0x00000000, len = 0 + flash3 (rx) : org = 0x00000000, len = 0 + flash4 (rx) : org = 0x00000000, len = 0 + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 128k + ram1 (wx) : org = 0x00000000, len = 0 + ram2 (wx) : org = 0x00000000, len = 0 + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x00000000, len = 0 + ram5 (wx) : org = 0x00000000, len = 0 + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash0); +REGION_ALIAS("XTORS_FLASH_LMA", flash0); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash0); +REGION_ALIAS("TEXT_FLASH_LMA", flash0); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash0); +REGION_ALIAS("RODATA_FLASH_LMA", flash0); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash0); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash0); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld + +/* TinyUF2 bootloader reset support */ +_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */ + diff --git a/platforms/chibios/GENERIC_STM32_F446XE/board/board.mk b/platforms/chibios/GENERIC_STM32_F446XE/board/board.mk new file mode 100644 index 0000000000..57897941ca --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_F446XE/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F446RE/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F446RE + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/GENERIC_STM32_F446XE/configs/board.h b/platforms/chibios/GENERIC_STM32_F446XE/configs/board.h new file mode 100644 index 0000000000..80dfcffa99 --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_F446XE/configs/board.h @@ -0,0 +1,24 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#define STM32_HSECLK 16000000 +// The following is required to disable the pull-down on PA9, when PA9 is used for the keyboard matrix: +#define BOARD_OTG_NOVBUSSENS + +#include_next "board.h" + +#undef STM32_HSE_BYPASS diff --git a/platforms/chibios/GENERIC_STM32_F446XE/configs/config.h b/platforms/chibios/GENERIC_STM32_F446XE/configs/config.h new file mode 100644 index 0000000000..cc52a953ed --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_F446XE/configs/config.h @@ -0,0 +1,23 @@ +/* Copyright 2021 Andrei Purdea + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606. + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 +#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP +# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#endif diff --git a/platforms/chibios/GENERIC_STM32_F446XE/configs/mcuconf.h b/platforms/chibios/GENERIC_STM32_F446XE/configs/mcuconf.h new file mode 100644 index 0000000000..d2de75590e --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_F446XE/configs/mcuconf.h @@ -0,0 +1,361 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED FALSE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 180 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SM_VALUE 8 +#define STM32_PLLI2SR_VALUE 4 +#define STM32_PLLI2SP_VALUE 4 +#define STM32_PLLI2SQ_VALUE 4 +#define STM32_PLLSAIN_VALUE 192 +#define STM32_PLLSAIM_VALUE 8 +#define STM32_PLLSAIP_VALUE 8 +#define STM32_PLLSAIQ_VALUE 4 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSE +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_PLLI2S +#define STM32_MCO2PRE STM32_MCO2PRE_DIV1 +#define STM32_I2SSRC STM32_I2SSRC_PLLI2S +#define STM32_SAI1SEL STM32_SAI2SEL_PLLR +#define STM32_SAI2SEL STM32_SAI2SEL_PLLR +#define STM32_CK48MSEL STM32_CK48MSEL_PLLALT +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 FALSE +#define STM32_DAC_USE_DAC1_CH2 FALSE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 1000 +#define STM32_SDC_READ_TIMEOUT_MS 1000 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USE_UART7 FALSE +#define STM32_SERIAL_USE_UART8 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 +#define STM32_SERIAL_UART7_PRIORITY 12 +#define STM32_SERIAL_UART8_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_USE_SPI4 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI4_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI4_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI4_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_SPI4_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 TRUE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/platforms/chibios/GENERIC_STM32_L433XC/board/board.mk b/platforms/chibios/GENERIC_STM32_L433XC/board/board.mk new file mode 100644 index 0000000000..1250385eb8 --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_L433XC/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO32_L432KC/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO32_L432KC + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/GENERIC_STM32_L433XC/configs/board.h b/platforms/chibios/GENERIC_STM32_L433XC/configs/board.h new file mode 100644 index 0000000000..51f9724f94 --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_L433XC/configs/board.h @@ -0,0 +1,24 @@ +/* Copyright 2018-2021 Harrison Chan (@Xelus) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#include_next "board.h" + +#undef STM32L432xx + +// Pretend that we're an L443xx as the ChibiOS definitions for L432/L433 mistakenly don't enable GPIOH, I2C2, or SPI2. +// Until ChibiOS upstream is fixed, this should be kept at L443, as nothing in QMK currently utilises the crypto peripheral on the L443. +#define STM32L443xx diff --git a/platforms/chibios/GENERIC_STM32_L433XC/configs/config.h b/platforms/chibios/GENERIC_STM32_L433XC/configs/config.h new file mode 100644 index 0000000000..c27c61b19a --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_L433XC/configs/config.h @@ -0,0 +1,26 @@ +/* Copyright 2018-2021 Harrison Chan (@Xelus) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606. + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 + +#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH + +#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP +# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#endif diff --git a/platforms/chibios/GENERIC_STM32_L433XC/configs/mcuconf.h b/platforms/chibios/GENERIC_STM32_L433XC/configs/mcuconf.h new file mode 100644 index 0000000000..948c740f6e --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_L433XC/configs/mcuconf.h @@ -0,0 +1,292 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + http://www.apache.org/licenses/LICENSE-2.0 + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32L4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#ifndef MCUCONF_H +#define MCUCONF_H + +#define STM32L4xx_MCUCONF +#define STM32L443_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_VOS STM32_VOS_RANGE1 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI16_ENABLED TRUE +#define STM32_HSI48_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_MSIPLL_ENABLED FALSE +#define STM32_MSIRANGE STM32_MSIRANGE_4M +#define STM32_MSISRANGE STM32_MSISRANGE_4M +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI16 +#define STM32_PLLM_VALUE 1 +#define STM32_PLLN_VALUE 10 +#define STM32_PLLPDIV_VALUE 0 +#define STM32_PLLP_VALUE 7 +#define STM32_PLLQ_VALUE 2 +#define STM32_PLLR_VALUE 2 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV1 +#define STM32_PPRE2 STM32_PPRE2_DIV1 +#define STM32_STOPWUCK STM32_STOPWUCK_MSI +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_MCOPRE STM32_MCOPRE_DIV1 +#define STM32_LSCOSEL STM32_LSCOSEL_NOCLOCK +#define STM32_PLLSAI1N_VALUE 24 +#define STM32_PLLSAI1PDIV_VALUE 0 +#define STM32_PLLSAI1P_VALUE 7 +#define STM32_PLLSAI1Q_VALUE 2 +#define STM32_PLLSAI1R_VALUE 2 + +/* + * Peripherals clock sources. + */ +#define STM32_USART1SEL STM32_USART1SEL_SYSCLK +#define STM32_USART2SEL STM32_USART2SEL_SYSCLK +#define STM32_USART3SEL STM32_USART3SEL_SYSCLK +#define STM32_LPUART1SEL STM32_LPUART1SEL_SYSCLK +#define STM32_I2C1SEL STM32_I2C1SEL_SYSCLK +#define STM32_I2C2SEL STM32_I2C2SEL_SYSCLK +#define STM32_I2C3SEL STM32_I2C3SEL_SYSCLK +#define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1 +#define STM32_LPTIM2SEL STM32_LPTIM2SEL_PCLK1 +#define STM32_SAI1SEL STM32_SAI1SEL_OFF +#define STM32_CLK48SEL STM32_CLK48SEL_HSI48 +#define STM32_ADCSEL STM32_ADCSEL_SYSCLK +#define STM32_SWPMI1SEL STM32_SWPMI1SEL_PCLK1 +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI1635_38_PRIORITY 6 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_22_PRIORITY 15 + +#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM6_PRIORITY 7 +#define STM32_IRQ_TIM7_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART3_PRIORITY 12 +#define STM32_IRQ_LPUART1_PRIORITY 12 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_COMPACT_SAMPLES FALSE +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC123_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC123_PRESC ADC_CCR_PRESC_DIV2 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 FALSE +#define STM32_DAC_USE_DAC1_CH2 FALSE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM15 FALSE +#define STM32_GPT_USE_TIM16 FALSE + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM15 FALSE +#define STM32_ICU_USE_TIM16 FALSE + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM15 FALSE +#define STM32_PWM_USE_TIM16 FALSE + +/* + * RTC driver system settings. + */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_RTC_TAMPCR_INIT 0 + +/* + * SDMMC drive system settings. + */ +#define STM32_SDC_USE_SDMMC1 FALSE +#define STM32_SDC_SDMMC_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDMMC_WRITE_TIMEOUT 1000 +#define STM32_SDC_SDMMC_READ_TIMEOUT 1000 +#define STM32_SDC_SDMMC_CLOCK_DELAY 10 +#define STM32_SDC_SDMMC1_DMA_PRIORITY 3 +#define STM32_SDC_SDMMC1_IRQ_PRIORITY 9 +#define STM32_SDC_SDMMC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_LPUART1 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_LPUART1_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * TRNG driver system settings. + */ +#define STM32_TRNG_USE_RNG1 FALSE + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +/* + * WSPI driver system settings. + */ +#define STM32_WSPI_USE_QUADSPI1 FALSE +#define STM32_WSPI_QUADSPI1_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) + +#endif /* MCUCONF_H */ diff --git a/platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk b/platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk index 3fa73a96e0..d0a337bad7 100644 --- a/platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk +++ b/platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk @@ -5,8 +5,5 @@ BOARD := QMK_PROTON_C OPT_DEFS += -DCONVERT_TO_PROTON_C # These are defaults based on what has been implemented for ARM boards -AUDIO_ENABLE = yes -WS2812_DRIVER = bitbang - -# Force task driven PWM until ARM can provide automatic configuration -BACKLIGHT_DRIVER = software
\ No newline at end of file +AUDIO_ENABLE ?= yes +WS2812_DRIVER ?= bitbang |