diff options
Diffstat (limited to 'platforms/chibios')
22 files changed, 369 insertions, 177 deletions
diff --git a/platforms/chibios/pin_defs.h b/platforms/chibios/_pin_defs.h index c03f8de0c2..a84d931cc2 100644 --- a/platforms/chibios/pin_defs.h +++ b/platforms/chibios/_pin_defs.h @@ -15,6 +15,12 @@ */ #pragma once +#if defined(MCU_KINETIS) +// TODO: including this avoids "error: expected identifier before '(' token" errors +// here just to please KINETIS builds... +# include <hal.h> +#endif + // Defines mapping for Proton C replacement #ifdef CONVERT_TO_PROTON_C // Left side (front) diff --git a/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h index c6f5a8ac52..e0af4a276b 100644 --- a/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -186,7 +186,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE diff --git a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h index 908a580a91..394e750256 100644 --- a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -86,6 +86,28 @@ #define STM32_IRQ_EXTI21_PRIORITY 15 #define STM32_IRQ_EXTI22_PRIORITY 15 +#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 +#define STM32_IRQ_TIM6_PRIORITY 7 +#define STM32_IRQ_TIM7_PRIORITY 7 +#define STM32_IRQ_TIM8_BRK_TIM12_PRIORITY 7 +#define STM32_IRQ_TIM8_UP_TIM13_PRIORITY 7 +#define STM32_IRQ_TIM8_TRGCO_TIM14_PRIORITY 7 +#define STM32_IRQ_TIM8_CC_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART3_PRIORITY 12 +#define STM32_IRQ_UART4_PRIORITY 12 +#define STM32_IRQ_UART5_PRIORITY 12 +#define STM32_IRQ_USART6_PRIORITY 12 + /* * ADC driver system settings. */ @@ -137,21 +159,11 @@ #define STM32_GPT_USE_TIM7 FALSE #define STM32_GPT_USE_TIM8 FALSE #define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM10 FALSE #define STM32_GPT_USE_TIM11 FALSE #define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM13 FALSE #define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 /* * I2C driver system settings. @@ -199,13 +211,11 @@ #define STM32_ICU_USE_TIM5 FALSE #define STM32_ICU_USE_TIM8 FALSE #define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 +#define STM32_ICU_USE_TIM10 FALSE +#define STM32_ICU_USE_TIM11 FALSE +#define STM32_ICU_USE_TIM12 FALSE +#define STM32_ICU_USE_TIM13 FALSE +#define STM32_ICU_USE_TIM14 FALSE /* * MAC driver system settings. @@ -221,7 +231,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE @@ -229,13 +238,11 @@ #define STM32_PWM_USE_TIM5 FALSE #define STM32_PWM_USE_TIM8 FALSE #define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 +#define STM32_PWM_USE_TIM10 FALSE +#define STM32_PWM_USE_TIM11 FALSE +#define STM32_PWM_USE_TIM12 FALSE +#define STM32_PWM_USE_TIM13 FALSE +#define STM32_PWM_USE_TIM14 FALSE /* * RTC driver system settings. @@ -265,12 +272,6 @@ #define STM32_SERIAL_USE_UART4 FALSE #define STM32_SERIAL_USE_UART5 FALSE #define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 /* * SPI driver system settings. @@ -319,12 +320,6 @@ #define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) #define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) #define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 #define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART3_DMA_PRIORITY 0 diff --git a/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h index 928ee56c71..07399ad2f7 100644 --- a/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -86,6 +86,28 @@ #define STM32_IRQ_EXTI21_PRIORITY 15 #define STM32_IRQ_EXTI22_PRIORITY 15 +#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 +#define STM32_IRQ_TIM6_PRIORITY 7 +#define STM32_IRQ_TIM7_PRIORITY 7 +#define STM32_IRQ_TIM8_BRK_TIM12_PRIORITY 7 +#define STM32_IRQ_TIM8_UP_TIM13_PRIORITY 7 +#define STM32_IRQ_TIM8_TRGCO_TIM14_PRIORITY 7 +#define STM32_IRQ_TIM8_CC_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART3_PRIORITY 12 +#define STM32_IRQ_UART4_PRIORITY 12 +#define STM32_IRQ_UART5_PRIORITY 12 +#define STM32_IRQ_USART6_PRIORITY 12 + /* * ADC driver system settings. */ @@ -137,21 +159,11 @@ #define STM32_GPT_USE_TIM7 FALSE #define STM32_GPT_USE_TIM8 FALSE #define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM10 FALSE #define STM32_GPT_USE_TIM11 FALSE #define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM13 FALSE #define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 /* * I2C driver system settings. @@ -199,13 +211,11 @@ #define STM32_ICU_USE_TIM5 FALSE #define STM32_ICU_USE_TIM8 FALSE #define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 +#define STM32_ICU_USE_TIM10 FALSE +#define STM32_ICU_USE_TIM11 FALSE +#define STM32_ICU_USE_TIM12 FALSE +#define STM32_ICU_USE_TIM13 FALSE +#define STM32_ICU_USE_TIM14 FALSE /* * MAC driver system settings. @@ -221,7 +231,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE @@ -229,13 +238,11 @@ #define STM32_PWM_USE_TIM5 FALSE #define STM32_PWM_USE_TIM8 FALSE #define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 +#define STM32_PWM_USE_TIM10 FALSE +#define STM32_PWM_USE_TIM11 FALSE +#define STM32_PWM_USE_TIM12 FALSE +#define STM32_PWM_USE_TIM13 FALSE +#define STM32_PWM_USE_TIM14 FALSE /* * RTC driver system settings. @@ -265,12 +272,6 @@ #define STM32_SERIAL_USE_UART4 FALSE #define STM32_SERIAL_USE_UART5 FALSE #define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 /* * SPI driver system settings. @@ -319,12 +320,6 @@ #define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) #define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) #define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 #define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART3_DMA_PRIORITY 0 diff --git a/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h index d115028300..fd00280115 100644 --- a/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -39,6 +39,7 @@ * HAL driver system settings. */ #define STM32_NO_INIT FALSE +#define STM32_CLOCK_DYNAMIC FALSE #define STM32_VOS STM32_VOS_RANGE1 #define STM32_PWR_BOOST TRUE #define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0) @@ -227,7 +228,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE @@ -240,6 +240,13 @@ /* * RTC driver system settings. */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_TAMP_CR1_INIT 0 +#define STM32_TAMP_CR2_INIT 0 +#define STM32_TAMP_FLTCR_INIT 0 +#define STM32_TAMP_IER_INIT 0 /* * SDC driver system settings. @@ -255,6 +262,15 @@ #define STM32_SERIAL_USE_LPUART1 FALSE /* + * SIO driver system settings. + */ +#define STM32_SIO_USE_USART1 FALSE +#define STM32_SIO_USE_USART2 FALSE +#define STM32_SIO_USE_USART3 FALSE +#define STM32_SIO_USE_UART4 FALSE +#define STM32_SIO_USE_LPUART1 FALSE + +/* * SPI driver system settings. */ #define STM32_SPI_USE_SPI1 FALSE diff --git a/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h index 5710e2cb45..d6385da624 100644 --- a/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -41,6 +41,7 @@ * HAL driver system settings. */ #define STM32_NO_INIT FALSE +#define STM32_CLOCK_DYNAMIC FALSE #define STM32_VOS STM32_VOS_RANGE1 #define STM32_PWR_BOOST TRUE #define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0) @@ -274,7 +275,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE @@ -289,6 +289,13 @@ /* * RTC driver system settings. */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_TAMP_CR1_INIT 0 +#define STM32_TAMP_CR2_INIT 0 +#define STM32_TAMP_FLTCR_INIT 0 +#define STM32_TAMP_IER_INIT 0 /* * SDC driver system settings. @@ -305,6 +312,16 @@ #define STM32_SERIAL_USE_LPUART1 FALSE /* + * SIO driver system settings. + */ +#define STM32_SIO_USE_USART1 FALSE +#define STM32_SIO_USE_USART2 FALSE +#define STM32_SIO_USE_USART3 FALSE +#define STM32_SIO_USE_UART4 FALSE +#define STM32_SIO_USE_UART5 FALSE +#define STM32_SIO_USE_LPUART1 FALSE + +/* * SPI driver system settings. */ #define STM32_SPI_USE_SPI1 FALSE @@ -383,5 +400,6 @@ */ #define STM32_WSPI_USE_QUADSPI1 FALSE #define STM32_WSPI_QUADSPI1_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_WSPI_QUADSPI1_PRESCALER_VALUE 1 #endif /* MCUCONF_H */ diff --git a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h index 2e37d95fe3..de5f85acdd 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h +++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h @@ -18,7 +18,4 @@ #include_next "board.h" #undef STM32L432xx - -// Pretend that we're an L443xx as the ChibiOS definitions for L4x2/L4x3 mistakenly don't enable GPIOH, I2C2, or SPI2. -// Until ChibiOS upstream is fixed, this should be kept at L443, as nothing in QMK currently utilises the crypto peripheral on the L443. -#define STM32L443xx +#define STM32L422xx diff --git a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h index fc9055ccfb..d67de4cfe2 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h +++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h @@ -18,8 +18,6 @@ /* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606. */ -#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH - #ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP # define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE #endif diff --git a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h index 8ad5a8da21..47f1598b74 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -32,12 +32,7 @@ #define MCUCONF_H #define STM32L4xx_MCUCONF -#define STM32L412_MCUCONF #define STM32L422_MCUCONF -#define STM32L432_MCUCONF -#define STM32L433_MCUCONF -#define STM32L442_MCUCONF -#define STM32L443_MCUCONF /* * HAL driver system settings. @@ -52,16 +47,13 @@ #define STM32_HSE_ENABLED FALSE #define STM32_LSE_ENABLED FALSE #define STM32_MSIPLL_ENABLED FALSE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_SAI1_CLOCK_ENABLED TRUE -#define STM32_SAI2_CLOCK_ENABLED TRUE #define STM32_MSIRANGE STM32_MSIRANGE_4M #define STM32_MSISRANGE STM32_MSISRANGE_4M #define STM32_SW STM32_SW_PLL #define STM32_PLLSRC STM32_PLLSRC_HSI16 #define STM32_PLLM_VALUE 4 #define STM32_PLLN_VALUE 80 +#define STM32_PLLPDIV_VALUE 0 #define STM32_PLLP_VALUE 7 #define STM32_PLLQ_VALUE 4 #define STM32_PLLR_VALUE 4 @@ -73,29 +65,22 @@ #define STM32_MCOPRE STM32_MCOPRE_DIV1 #define STM32_LSCOSEL STM32_LSCOSEL_NOCLOCK #define STM32_PLLSAI1N_VALUE 72 +#define STM32_PLLSAI1PDIV_VALUE 6 #define STM32_PLLSAI1P_VALUE 7 #define STM32_PLLSAI1Q_VALUE 6 #define STM32_PLLSAI1R_VALUE 6 -#define STM32_PLLSAI2N_VALUE 72 -#define STM32_PLLSAI2P_VALUE 7 -#define STM32_PLLSAI2R_VALUE 6 /* * Peripherals clock sources. */ #define STM32_USART1SEL STM32_USART1SEL_SYSCLK #define STM32_USART2SEL STM32_USART2SEL_SYSCLK -#define STM32_USART3SEL STM32_USART3SEL_SYSCLK -#define STM32_UART4SEL STM32_UART4SEL_SYSCLK -#define STM32_UART5SEL STM32_UART5SEL_SYSCLK #define STM32_LPUART1SEL STM32_LPUART1SEL_SYSCLK #define STM32_I2C1SEL STM32_I2C1SEL_SYSCLK -#define STM32_I2C2SEL STM32_I2C2SEL_SYSCLK #define STM32_I2C3SEL STM32_I2C3SEL_SYSCLK #define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1 #define STM32_LPTIM2SEL STM32_LPTIM2SEL_PCLK1 #define STM32_SAI1SEL STM32_SAI1SEL_OFF -#define STM32_SAI2SEL STM32_SAI2SEL_OFF #define STM32_CLK48SEL STM32_CLK48SEL_HSI48 #define STM32_ADCSEL STM32_ADCSEL_SYSCLK #define STM32_SWPMI1SEL STM32_SWPMI1SEL_PCLK1 @@ -127,7 +112,6 @@ #define STM32_IRQ_USART1_PRIORITY 12 #define STM32_IRQ_USART2_PRIORITY 12 -#define STM32_IRQ_USART3_PRIORITY 12 #define STM32_IRQ_LPUART1_PRIORITY 12 /* @@ -137,29 +121,15 @@ #define STM32_ADC_USE_ADC1 FALSE #define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) #define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_ADC_ADC2_DMA_PRIORITY 2 #define STM32_ADC_ADC12_IRQ_PRIORITY 5 #define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 #define STM32_ADC_ADC123_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 #define STM32_ADC_ADC123_PRESC ADC_CCR_PRESC_DIV2 -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) /* * GPT driver system settings. @@ -198,7 +168,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM15 FALSE @@ -218,23 +187,22 @@ #define STM32_SERIAL_USE_USART1 FALSE #define STM32_SERIAL_USE_USART2 FALSE #define STM32_SERIAL_USE_LPUART1 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_LPUART1_PRIORITY 12 + +/* + * SIO driver system settings. + */ +#define STM32_SIO_USE_USART1 FALSE +#define STM32_SIO_USE_USART2 FALSE +#define STM32_SIO_USE_LPUART1 FALSE /* * SPI driver system settings. */ #define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI3 FALSE #define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) #define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) #define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 #define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 #define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") /* diff --git a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h index b1838b30a8..839d031ca4 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h +++ b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/config.h @@ -2,9 +2,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later #pragma once -// Fixup equivalent usages within QMK as the base board definitions only go up to high -#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH - #ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP # define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE #endif diff --git a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h index 707134d49e..be64b04812 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_L432XC/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -33,7 +33,6 @@ #define STM32L4xx_MCUCONF #define STM32L432_MCUCONF -#define STM32L433_MCUCONF /* * HAL driver system settings. @@ -183,7 +182,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM15 FALSE @@ -203,9 +201,13 @@ #define STM32_SERIAL_USE_USART1 FALSE #define STM32_SERIAL_USE_USART2 FALSE #define STM32_SERIAL_USE_LPUART1 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_LPUART1_PRIORITY 12 + +/* + * SIO driver system settings. + */ +#define STM32_SIO_USE_USART1 FALSE +#define STM32_SIO_USE_USART2 FALSE +#define STM32_SIO_USE_LPUART1 FALSE /* * SPI driver system settings. diff --git a/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h index fc9055ccfb..d67de4cfe2 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h +++ b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h @@ -18,8 +18,6 @@ /* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606. */ -#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH - #ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP # define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE #endif diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h b/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h index f812332960..cc10304a3f 100644 --- a/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h +++ b/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -29,7 +29,27 @@ #define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_1_ +#define _CHIBIOS_RT_CONF_VER_7_0_ + +/*===========================================================================*/ +/** + * @name System settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Handling of instances. + * @note If enabled then threads assigned to various instances can + * interact each other using the same synchronization objects. + * If disabled then each OS instance is a separate world, no + * direct interactions are handled by the OS. + */ +#if !defined(CH_CFG_SMP_MODE) +#define CH_CFG_SMP_MODE FALSE +#endif + +/** @} */ /*===========================================================================*/ /** @@ -161,6 +181,16 @@ #endif /** + * @brief Time Stamps APIs. + * @details If enabled then the time stamps APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TIMESTAMP) +#define CH_CFG_USE_TIMESTAMP TRUE +#endif + +/** * @brief Threads registry APIs. * @details If enabled then the registry APIs are included in the kernel. * @@ -631,7 +661,7 @@ * @details User fields added to the end of the @p ch_system_t structure. */ #define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ + /* Add system custom fields here.*/ /** * @brief System initialization hook. @@ -639,7 +669,23 @@ * just before interrupts are enabled globally. */ #define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ + /* Add system initialization code here.*/ \ +} + +/** + * @brief OS instance structure extension. + * @details User fields added to the end of the @p os_instance_t structure. + */ +#define CH_CFG_OS_INSTANCE_EXTRA_FIELDS \ + /* Add OS instance custom fields here.*/ + +/** + * @brief OS instance initialization hook. + * + * @param[in] oip pointer to the @p os_instance_t structure + */ +#define CH_CFG_OS_INSTANCE_INIT_HOOK(oip) { \ + /* Add OS instance initialization code here.*/ \ } /** @@ -655,6 +701,8 @@ * * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. + * + * @param[in] tp pointer to the @p thread_t structure */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ /* Add threads initialization code here.*/ \ @@ -663,6 +711,8 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. + * + * @param[in] tp pointer to the @p thread_t structure */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -671,6 +721,9 @@ /** * @brief Context switch hook. * @details This hook is invoked just before switching between threads. + * + * @param[in] ntp thread being switched in + * @param[in] otp thread being switched out */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ /* Context switch code here.*/ \ @@ -745,6 +798,14 @@ /* Trace code here.*/ \ } +/** + * @brief Runtime Faults Collection Unit hook. + * @details This hook is invoked each time new faults are collected and stored. + */ +#define CH_CFG_RUNTIME_FAULTS_HOOK(mask) { \ + /* Faults handling code here.*/ \ +} + /** @} */ /*===========================================================================*/ diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h b/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h index d7a639a6d0..8367328a04 100644 --- a/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h +++ b/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -29,7 +29,7 @@ #define HALCONF_H #define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_1_ +#define _CHIBIOS_HAL_CONF_VER_8_0_ #include <mcuconf.h> @@ -416,6 +416,26 @@ #endif /*===========================================================================*/ +/* SIO driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SIO_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SIO_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Support for thread synchronization API. + */ +#if !defined(SIO_USE_SYNCHRONIZATION) || defined(__DOXYGEN__) +#define SIO_USE_SYNCHRONIZATION TRUE +#endif + +/*===========================================================================*/ /* SERIAL_USB driver related setting. */ /*===========================================================================*/ @@ -451,11 +471,10 @@ #endif /** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. + * @brief Inserts an assertion on function errors before returning. */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE +#if !defined(SPI_USE_ASSERT_ON_ERROR) || defined(__DOXYGEN__) +#define SPI_USE_ASSERT_ON_ERROR TRUE #endif /** diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h b/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h index 4d7b586c08..cab4c29cf6 100644 --- a/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h +++ b/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -186,7 +186,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 TRUE diff --git a/platforms/chibios/boards/common/configs/chconf.h b/platforms/chibios/boards/common/configs/chconf.h index 18ad609ca1..5db836e37c 100644 --- a/platforms/chibios/boards/common/configs/chconf.h +++ b/platforms/chibios/boards/common/configs/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -29,7 +29,27 @@ #define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_1_ +#define _CHIBIOS_RT_CONF_VER_7_0_ + +/*===========================================================================*/ +/** + * @name System settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Handling of instances. + * @note If enabled then threads assigned to various instances can + * interact each other using the same synchronization objects. + * If disabled then each OS instance is a separate world, no + * direct interactions are handled by the OS. + */ +#if !defined(CH_CFG_SMP_MODE) +#define CH_CFG_SMP_MODE FALSE +#endif + +/** @} */ /*===========================================================================*/ /** @@ -161,6 +181,16 @@ #endif /** + * @brief Time Stamps APIs. + * @details If enabled then the time stamps APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TIMESTAMP) +#define CH_CFG_USE_TIMESTAMP TRUE +#endif + +/** * @brief Threads registry APIs. * @details If enabled then the registry APIs are included in the kernel. * @@ -631,7 +661,7 @@ * @details User fields added to the end of the @p ch_system_t structure. */ #define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ + /* Add system custom fields here.*/ /** * @brief System initialization hook. @@ -639,7 +669,23 @@ * just before interrupts are enabled globally. */ #define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ + /* Add system initialization code here.*/ \ +} + +/** + * @brief OS instance structure extension. + * @details User fields added to the end of the @p os_instance_t structure. + */ +#define CH_CFG_OS_INSTANCE_EXTRA_FIELDS \ + /* Add OS instance custom fields here.*/ + +/** + * @brief OS instance initialization hook. + * + * @param[in] oip pointer to the @p os_instance_t structure + */ +#define CH_CFG_OS_INSTANCE_INIT_HOOK(oip) { \ + /* Add OS instance initialization code here.*/ \ } /** @@ -655,6 +701,8 @@ * * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. + * + * @param[in] tp pointer to the @p thread_t structure */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ /* Add threads initialization code here.*/ \ @@ -663,6 +711,8 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. + * + * @param[in] tp pointer to the @p thread_t structure */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -671,6 +721,9 @@ /** * @brief Context switch hook. * @details This hook is invoked just before switching between threads. + * + * @param[in] ntp thread being switched in + * @param[in] otp thread being switched out */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ /* Context switch code here.*/ \ @@ -745,6 +798,14 @@ /* Trace code here.*/ \ } +/** + * @brief Runtime Faults Collection Unit hook. + * @details This hook is invoked each time new faults are collected and stored. + */ +#define CH_CFG_RUNTIME_FAULTS_HOOK(mask) { \ + /* Faults handling code here.*/ \ +} + /** @} */ /*===========================================================================*/ diff --git a/platforms/chibios/boards/common/configs/halconf.h b/platforms/chibios/boards/common/configs/halconf.h index c80f67ee27..1805a77438 100644 --- a/platforms/chibios/boards/common/configs/halconf.h +++ b/platforms/chibios/boards/common/configs/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -29,7 +29,7 @@ #define HALCONF_H #define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_1_ +#define _CHIBIOS_HAL_CONF_VER_8_0_ #include <mcuconf.h> @@ -416,6 +416,26 @@ #endif /*===========================================================================*/ +/* SIO driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SIO_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SIO_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Support for thread synchronization API. + */ +#if !defined(SIO_USE_SYNCHRONIZATION) || defined(__DOXYGEN__) +#define SIO_USE_SYNCHRONIZATION TRUE +#endif + +/*===========================================================================*/ /* SERIAL_USB driver related setting. */ /*===========================================================================*/ @@ -451,11 +471,10 @@ #endif /** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. + * @brief Inserts an assertion on function errors before returning. */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE +#if !defined(SPI_USE_ASSERT_ON_ERROR) || defined(__DOXYGEN__) +#define SPI_USE_ASSERT_ON_ERROR TRUE #endif /** diff --git a/platforms/chibios/drivers/ws2812_spi.c b/platforms/chibios/drivers/ws2812_spi.c index 76191db165..01d8148875 100644 --- a/platforms/chibios/drivers/ws2812_spi.c +++ b/platforms/chibios/drivers/ws2812_spi.c @@ -139,7 +139,33 @@ void ws2812_init(void) { #endif // WS2812_SPI_SCK_PIN // TODO: more dynamic baudrate - static const SPIConfig spicfg = {WS2812_SPI_BUFFER_MODE, NULL, PAL_PORT(RGB_DI_PIN), PAL_PAD(RGB_DI_PIN), WS2812_SPI_DIVISOR_CR1_BR_X}; + static const SPIConfig spicfg = { +#ifndef HAL_LLD_SELECT_SPI_V2 +// HAL_SPI_V1 +# if SPI_SUPPORTS_CIRCULAR == TRUE + WS2812_SPI_BUFFER_MODE, +# endif + NULL, // end_cb + PAL_PORT(RGB_DI_PIN), + PAL_PAD(RGB_DI_PIN), + WS2812_SPI_DIVISOR_CR1_BR_X, + 0 +#else + // HAL_SPI_V2 +# if SPI_SUPPORTS_CIRCULAR == TRUE + WS2812_SPI_BUFFER_MODE, +# endif +# if SPI_SUPPORTS_SLAVE_MODE == TRUE + false, +# endif + NULL, // data_cb + NULL, // error_cb + PAL_PORT(RGB_DI_PIN), + PAL_PAD(RGB_DI_PIN), + WS2812_SPI_DIVISOR_CR1_BR_X, + 0 +#endif + }; spiAcquireBus(&WS2812_SPI); /* Acquire ownership of the bus. */ spiStart(&WS2812_SPI, &spicfg); /* Setup transfer parameters. */ diff --git a/platforms/chibios/flash.mk b/platforms/chibios/flash.mk index 6ee53172d2..a91ef2cf35 100644 --- a/platforms/chibios/flash.mk +++ b/platforms/chibios/flash.mk @@ -40,6 +40,18 @@ endef dfu-util: $(BUILD_DIR)/$(TARGET).bin cpfirmware sizeafter $(call EXEC_DFU_UTIL) +define EXEC_UF2_UTIL_DEPLOY + if ! $(UF2CONV) --deploy $(BUILD_DIR)/$(TARGET).uf2 2>/dev/null; then \ + printf "$(MSG_BOOTLOADER_NOT_FOUND_QUICK_RETRY)" ;\ + sleep $(BOOTLOADER_RETRY_TIME) ;\ + while ! $(UF2CONV) --deploy $(BUILD_DIR)/$(TARGET).uf2 2>/dev/null; do \ + printf "." ;\ + sleep $(BOOTLOADER_RETRY_TIME) ;\ + done ;\ + printf "\n" ;\ + fi +endef + # TODO: Remove once ARM has a way to configure EECONFIG_HANDEDNESS # within the emulated eeprom via dfu-util or another tool ifneq (,$(filter $(MAKECMDGOALS),dfu-util-split-left)) @@ -90,6 +102,8 @@ ifneq ($(strip $(PROGRAM_CMD)),) $(UNSYNC_OUTPUT_CMD) && $(PROGRAM_CMD) else ifeq ($(strip $(BOOTLOADER)),kiibohd) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_DFU_UTIL) +else ifeq ($(strip $(BOOTLOADER)),tinyuf2) + $(UNSYNC_OUTPUT_CMD) && $(call EXEC_UF2_UTIL_DEPLOY) else ifeq ($(strip $(MCU_FAMILY)),KINETIS) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_TEENSY) else ifeq ($(strip $(MCU_FAMILY)),MIMXRT1062) diff --git a/platforms/chibios/platform.mk b/platforms/chibios/platform.mk index 6fd1fd83f5..91dd0479bc 100644 --- a/platforms/chibios/platform.mk +++ b/platforms/chibios/platform.mk @@ -39,7 +39,6 @@ ifeq ($(strip $(MCU)), risc-v) STARTUP_MK = $(CHIBIOS_CONTRIB)/os/common/startup/RISCV-ECLIC/compilers/GCC/mk/startup_$(MCU_STARTUP).mk PORT_V = $(CHIBIOS_CONTRIB)/os/common/ports/RISCV-ECLIC/compilers/GCC/mk/port.mk RULESPATH = $(CHIBIOS_CONTRIB)/os/common/startup/RISCV-ECLIC/compilers/GCC - PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/GD/GD32VF103/platform.mk else # ARM Support CHIBIOS_PORT ?= @@ -82,10 +81,15 @@ ifeq ("$(PLATFORM_NAME)","") PLATFORM_NAME = platform endif +# If no MCU port name was specified, use the family instead +ifeq ("$(MCU_PORT_NAME)","") + MCU_PORT_NAME = $(MCU_FAMILY) +endif + ifeq ("$(wildcard $(PLATFORM_MK))","") - PLATFORM_MK = $(CHIBIOS)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk + PLATFORM_MK = $(CHIBIOS)/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)/$(PLATFORM_NAME).mk ifeq ("$(wildcard $(PLATFORM_MK))","") - PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk + PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)/$(PLATFORM_NAME).mk endif endif diff --git a/platforms/chibios/timer.c b/platforms/chibios/timer.c index e3bdfdcc37..5e01ea6372 100644 --- a/platforms/chibios/timer.c +++ b/platforms/chibios/timer.c @@ -40,7 +40,7 @@ static virtual_timer_t update_timer; # define UPDATE_INTERVAL (((sysinterval_t)1) << (CH_CFG_ST_RESOLUTION - 1)) // VT callback function to keep the overflow bits of the system tick counter updated. -static void update_fn(void *arg) { +static void update_fn(struct ch_virtual_timer *timer, void *arg) { (void)arg; chSysLockFromISR(); get_system_time_ticks(); diff --git a/platforms/chibios/wait.c b/platforms/chibios/wait.c index 56fd6ffcec..88cb5e6d54 100644 --- a/platforms/chibios/wait.c +++ b/platforms/chibios/wait.c @@ -31,7 +31,7 @@ void wait_us(uint16_t duration) { * Only use this timer on the main thread; * other threads need to use their own timer. */ - if (chThdGetSelfX() == &ch.mainthread && duration < (1ULL << (sizeof(gptcnt_t) * 8))) { + if (chThdGetSelfX() == &(currcore->mainthread) && duration < (1ULL << (sizeof(gptcnt_t) * 8))) { gptStart(&WAIT_US_TIMER, &gpt_cfg); gptPolledDelay(&WAIT_US_TIMER, duration); } else { |