diff options
Diffstat (limited to 'platforms/chibios/drivers')
22 files changed, 3320 insertions, 284 deletions
diff --git a/platforms/chibios/drivers/eeprom/eeprom_stm32.c b/platforms/chibios/drivers/eeprom/eeprom_stm32.c new file mode 100644 index 0000000000..1a354dc213 --- /dev/null +++ b/platforms/chibios/drivers/eeprom/eeprom_stm32.c @@ -0,0 +1,629 @@ +/* + * This software is experimental and a work in progress. + * Under no circumstances should these files be used in relation to any critical system(s). + * Use of these files is at your own risk. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, + * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR + * PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE + * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * This files are free to use from http://engsta.com/stm32-flash-memory-eeprom-emulator/ by + * Artur F. + * + * Modifications for QMK and STM32F303 by Yiancar + * Modifications to add flash wear leveling by Ilya Zhuravlev + * Modifications to increase flash density by Don Kjer + */ + +#include <stdio.h> +#include <stdbool.h> +#include "util.h" +#include "debug.h" +#include "eeprom_stm32.h" +#include "flash_stm32.h" + +/* + * We emulate eeprom by writing a snapshot compacted view of eeprom contents, + * followed by a write log of any change since that snapshot: + * + * === SIMULATED EEPROM CONTENTS === + * + * ┌─ Compacted ┬ Write Log ─┐ + * │............│[BYTE][BYTE]│ + * │FFFF....FFFF│[WRD0][WRD1]│ + * │FFFFFFFFFFFF│[WORD][NEXT]│ + * │....FFFFFFFF│[BYTE][WRD0]│ + * ├────────────┼────────────┤ + * └──PAGE_BASE │ │ + * PAGE_LAST─┴─WRITE_BASE │ + * WRITE_LAST ┘ + * + * Compacted contents are the 1's complement of the actual EEPROM contents. + * e.g. An 'FFFF' represents a '0000' value. + * + * The size of the 'compacted' area is equal to the size of the 'emulated' eeprom. + * The size of the compacted-area and write log are configurable, and the combined + * size of Compacted + WriteLog is a multiple FEE_PAGE_SIZE, which is MCU dependent. + * Simulated Eeprom contents are located at the end of available flash space. + * + * The following configuration defines can be set: + * + * FEE_PAGE_COUNT # Total number of pages to use for eeprom simulation (Compact + Write log) + * FEE_DENSITY_BYTES # Size of simulated eeprom. (Defaults to half the space allocated by FEE_PAGE_COUNT) + * NOTE: The current implementation does not include page swapping, + * and FEE_DENSITY_BYTES will consume that amount of RAM as a cached view of actual EEPROM contents. + * + * The maximum size of FEE_DENSITY_BYTES is currently 16384. The write log size equals + * FEE_PAGE_COUNT * FEE_PAGE_SIZE - FEE_DENSITY_BYTES. + * The larger the write log, the less frequently the compacted area needs to be rewritten. + * + * + * *** General Algorithm *** + * + * During initialization: + * The contents of the Compacted-flash area are loaded and the 1's complement value + * is cached into memory (e.g. 0xFFFF in Flash represents 0x0000 in cache). + * Write log entries are processed until a 0xFFFF is reached. + * Each log entry updates a byte or word in the cache. + * + * During reads: + * EEPROM contents are given back directly from the cache in memory. + * + * During writes: + * The contents of the cache is updated first. + * If the Compacted-flash area corresponding to the write address is unprogrammed, the 1's complement of the value is written directly into Compacted-flash + * Otherwise: + * If the write log is full, erase both the Compacted-flash area and the Write log, then write cached contents to the Compacted-flash area. + * Otherwise a Write log entry is constructed and appended to the next free position in the Write log. + * + * + * *** Write Log Structure *** + * + * Write log entries allow for optimized byte writes to addresses below 128. Writing 0 or 1 words are also optimized when word-aligned. + * + * === WRITE LOG ENTRY FORMATS === + * + * ╔═══ Byte-Entry ══╗ + * ║0XXXXXXX║YYYYYYYY║ + * ║ └──┬──┘║└──┬───┘║ + * ║ Address║ Value ║ + * ╚════════╩════════╝ + * 0 <= Address < 0x80 (128) + * + * ╔ Word-Encoded 0 ╗ + * ║100XXXXXXXXXXXXX║ + * ║ │└─────┬─────┘║ + * ║ │Address >> 1 ║ + * ║ └── Value: 0 ║ + * ╚════════════════╝ + * 0 <= Address <= 0x3FFE (16382) + * + * ╔ Word-Encoded 1 ╗ + * ║101XXXXXXXXXXXXX║ + * ║ │└─────┬─────┘║ + * ║ │Address >> 1 ║ + * ║ └── Value: 1 ║ + * ╚════════════════╝ + * 0 <= Address <= 0x3FFE (16382) + * + * ╔═══ Reserved ═══╗ + * ║110XXXXXXXXXXXXX║ + * ╚════════════════╝ + * + * ╔═══════════ Word-Next ═══════════╗ + * ║111XXXXXXXXXXXXX║YYYYYYYYYYYYYYYY║ + * ║ └─────┬─────┘║└───────┬──────┘║ + * ║(Address-128)>>1║ ~Value ║ + * ╚════════════════╩════════════════╝ + * ( 0 <= Address < 0x0080 (128): Reserved) + * 0x80 <= Address <= 0x3FFE (16382) + * + * Write Log entry ranges: + * 0x0000 ... 0x7FFF - Byte-Entry; address is (Entry & 0x7F00) >> 4; value is (Entry & 0xFF) + * 0x8000 ... 0x9FFF - Word-Encoded 0; address is (Entry & 0x1FFF) << 1; value is 0 + * 0xA000 ... 0xBFFF - Word-Encoded 1; address is (Entry & 0x1FFF) << 1; value is 1 + * 0xC000 ... 0xDFFF - Reserved + * 0xE000 ... 0xFFBF - Word-Next; address is (Entry & 0x1FFF) << 1 + 0x80; value is ~(Next_Entry) + * 0xFFC0 ... 0xFFFE - Reserved + * 0xFFFF - Unprogrammed + * + */ + +#include "eeprom_stm32_defs.h" +/* These bits are used for optimizing encoding of bytes, 0 and 1 */ +#define FEE_WORD_ENCODING 0x8000 +#define FEE_VALUE_NEXT 0x6000 +#define FEE_VALUE_RESERVED 0x4000 +#define FEE_VALUE_ENCODED 0x2000 +#define FEE_BYTE_RANGE 0x80 + +/* Flash word value after erase */ +#define FEE_EMPTY_WORD ((uint16_t)0xFFFF) + +#if !defined(FEE_PAGE_SIZE) || !defined(FEE_PAGE_COUNT) || !defined(FEE_MCU_FLASH_SIZE) || !defined(FEE_PAGE_BASE_ADDRESS) +# error "not implemented." +#endif + +/* In-memory contents of emulated eeprom for faster access */ +/* *TODO: Implement page swapping */ +static uint16_t WordBuf[FEE_DENSITY_BYTES / 2]; +static uint8_t *DataBuf = (uint8_t *)WordBuf; + +/* Pointer to the first available slot within the write log */ +static uint16_t *empty_slot; + +// #define DEBUG_EEPROM_OUTPUT + +/* + * Debug print utils + */ + +#if defined(DEBUG_EEPROM_OUTPUT) + +# define debug_eeprom debug_enable +# define eeprom_println(s) println(s) +# define eeprom_printf(fmt, ...) xprintf(fmt, ##__VA_ARGS__); + +#else /* NO_DEBUG */ + +# define debug_eeprom false +# define eeprom_println(s) +# define eeprom_printf(fmt, ...) + +#endif /* NO_DEBUG */ + +void print_eeprom(void) { +#ifndef NO_DEBUG + int empty_rows = 0; + for (uint16_t i = 0; i < FEE_DENSITY_BYTES; i++) { + if (i % 16 == 0) { + if (i >= FEE_DENSITY_BYTES - 16) { + /* Make sure we display the last row */ + empty_rows = 0; + } + /* Check if this row is uninitialized */ + ++empty_rows; + for (uint16_t j = 0; j < 16; j++) { + if (DataBuf[i + j]) { + empty_rows = 0; + break; + } + } + if (empty_rows > 1) { + /* Repeat empty row */ + if (empty_rows == 2) { + /* Only display the first repeat empty row */ + println("*"); + } + i += 15; + continue; + } + xprintf("%04x", i); + } + if (i % 8 == 0) print(" "); + + xprintf(" %02x", DataBuf[i]); + if ((i + 1) % 16 == 0) { + println(""); + } + } +#endif +} + +uint16_t EEPROM_Init(void) { + /* Load emulated eeprom contents from compacted flash into memory */ + uint16_t *src = (uint16_t *)FEE_COMPACTED_BASE_ADDRESS; + uint16_t *dest = (uint16_t *)DataBuf; + for (; src < (uint16_t *)FEE_COMPACTED_LAST_ADDRESS; ++src, ++dest) { + *dest = ~*src; + } + + if (debug_eeprom) { + println("EEPROM_Init Compacted Pages:"); + print_eeprom(); + println("EEPROM_Init Write Log:"); + } + + /* Replay write log */ + uint16_t *log_addr; + for (log_addr = (uint16_t *)FEE_WRITE_LOG_BASE_ADDRESS; log_addr < (uint16_t *)FEE_WRITE_LOG_LAST_ADDRESS; ++log_addr) { + uint16_t address = *log_addr; + if (address == FEE_EMPTY_WORD) { + break; + } + /* Check for lowest 128-bytes optimization */ + if (!(address & FEE_WORD_ENCODING)) { + uint8_t bvalue = (uint8_t)address; + address >>= 8; + DataBuf[address] = bvalue; + eeprom_printf("DataBuf[0x%02x] = 0x%02x;\n", address, bvalue); + } else { + uint16_t wvalue; + /* Check if value is in next word */ + if ((address & FEE_VALUE_NEXT) == FEE_VALUE_NEXT) { + /* Read value from next word */ + if (++log_addr >= (uint16_t *)FEE_WRITE_LOG_LAST_ADDRESS) { + break; + } + wvalue = ~*log_addr; + if (!wvalue) { + eeprom_printf("Incomplete write at log_addr: 0x%04lx;\n", (uint32_t)log_addr); + /* Possibly incomplete write. Ignore and continue */ + continue; + } + address &= 0x1FFF; + address <<= 1; + /* Writes to addresses less than 128 are byte log entries */ + address += FEE_BYTE_RANGE; + } else { + /* Reserved for future use */ + if (address & FEE_VALUE_RESERVED) { + eeprom_printf("Reserved encoded value at log_addr: 0x%04lx;\n", (uint32_t)log_addr); + continue; + } + /* Optimization for 0 or 1 values. */ + wvalue = (address & FEE_VALUE_ENCODED) >> 13; + address &= 0x1FFF; + address <<= 1; + } + if (address < FEE_DENSITY_BYTES) { + eeprom_printf("DataBuf[0x%04x] = 0x%04x;\n", address, wvalue); + *(uint16_t *)(&DataBuf[address]) = wvalue; + } else { + eeprom_printf("DataBuf[0x%04x] cannot be set to 0x%04x [BAD ADDRESS]\n", address, wvalue); + } + } + } + + empty_slot = log_addr; + + if (debug_eeprom) { + println("EEPROM_Init Final DataBuf:"); + print_eeprom(); + } + + return FEE_DENSITY_BYTES; +} + +/* Clear flash contents (doesn't touch in-memory DataBuf) */ +static void eeprom_clear(void) { + FLASH_Unlock(); + + for (uint16_t page_num = 0; page_num < FEE_PAGE_COUNT; ++page_num) { + eeprom_printf("FLASH_ErasePage(0x%04lx)\n", (uint32_t)(FEE_PAGE_BASE_ADDRESS + (page_num * FEE_PAGE_SIZE))); + FLASH_ErasePage(FEE_PAGE_BASE_ADDRESS + (page_num * FEE_PAGE_SIZE)); + } + + FLASH_Lock(); + + empty_slot = (uint16_t *)FEE_WRITE_LOG_BASE_ADDRESS; + eeprom_printf("eeprom_clear empty_slot: 0x%08lx\n", (uint32_t)empty_slot); +} + +/* Erase emulated eeprom */ +void EEPROM_Erase(void) { + eeprom_println("EEPROM_Erase"); + /* Erase compacted pages and write log */ + eeprom_clear(); + /* re-initialize to reset DataBuf */ + EEPROM_Init(); +} + +/* Compact write log */ +static uint8_t eeprom_compact(void) { + /* Erase compacted pages and write log */ + eeprom_clear(); + + FLASH_Unlock(); + + FLASH_Status final_status = FLASH_COMPLETE; + + /* Write emulated eeprom contents from memory to compacted flash */ + uint16_t *src = (uint16_t *)DataBuf; + uintptr_t dest = FEE_COMPACTED_BASE_ADDRESS; + uint16_t value; + for (; dest < FEE_COMPACTED_LAST_ADDRESS; ++src, dest += 2) { + value = *src; + if (value) { + eeprom_printf("FLASH_ProgramHalfWord(0x%04lx, 0x%04x)\n", (uint32_t)dest, ~value); + FLASH_Status status = FLASH_ProgramHalfWord(dest, ~value); + if (status != FLASH_COMPLETE) final_status = status; + } + } + + FLASH_Lock(); + + if (debug_eeprom) { + println("eeprom_compacted:"); + print_eeprom(); + } + + return final_status; +} + +static uint8_t eeprom_write_direct_entry(uint16_t Address) { + /* Check if we can just write this directly to the compacted flash area */ + uintptr_t directAddress = FEE_COMPACTED_BASE_ADDRESS + (Address & 0xFFFE); + if (*(uint16_t *)directAddress == FEE_EMPTY_WORD) { + /* Write the value directly to the compacted area without a log entry */ + uint16_t value = ~*(uint16_t *)(&DataBuf[Address & 0xFFFE]); + /* Early exit if a write isn't needed */ + if (value == FEE_EMPTY_WORD) return FLASH_COMPLETE; + + FLASH_Unlock(); + + eeprom_printf("FLASH_ProgramHalfWord(0x%08lx, 0x%04x) [DIRECT]\n", (uint32_t)directAddress, value); + FLASH_Status status = FLASH_ProgramHalfWord(directAddress, value); + + FLASH_Lock(); + return status; + } + return 0; +} + +static uint8_t eeprom_write_log_word_entry(uint16_t Address) { + FLASH_Status final_status = FLASH_COMPLETE; + + uint16_t value = *(uint16_t *)(&DataBuf[Address]); + eeprom_printf("eeprom_write_log_word_entry(0x%04x): 0x%04x\n", Address, value); + + /* MSB signifies the lowest 128-byte optimization is not in effect */ + uint16_t encoding = FEE_WORD_ENCODING; + uint8_t entry_size; + if (value <= 1) { + encoding |= value << 13; + entry_size = 2; + } else { + encoding |= FEE_VALUE_NEXT; + entry_size = 4; + /* Writes to addresses less than 128 are byte log entries */ + Address -= FEE_BYTE_RANGE; + } + + /* if we can't find an empty spot, we must compact emulated eeprom */ + if (empty_slot > (uint16_t *)(FEE_WRITE_LOG_LAST_ADDRESS - entry_size)) { + /* compact the write log into the compacted flash area */ + return eeprom_compact(); + } + + /* Word log writes should be word-aligned. Take back a bit */ + Address >>= 1; + Address |= encoding; + + /* ok we found a place let's write our data */ + FLASH_Unlock(); + + /* address */ + eeprom_printf("FLASH_ProgramHalfWord(0x%08lx, 0x%04x)\n", (uint32_t)empty_slot, Address); + final_status = FLASH_ProgramHalfWord((uintptr_t)empty_slot++, Address); + + /* value */ + if (encoding == (FEE_WORD_ENCODING | FEE_VALUE_NEXT)) { + eeprom_printf("FLASH_ProgramHalfWord(0x%08lx, 0x%04x)\n", (uint32_t)empty_slot, ~value); + FLASH_Status status = FLASH_ProgramHalfWord((uintptr_t)empty_slot++, ~value); + if (status != FLASH_COMPLETE) final_status = status; + } + + FLASH_Lock(); + + return final_status; +} + +static uint8_t eeprom_write_log_byte_entry(uint16_t Address) { + eeprom_printf("eeprom_write_log_byte_entry(0x%04x): 0x%02x\n", Address, DataBuf[Address]); + + /* if couldn't find an empty spot, we must compact emulated eeprom */ + if (empty_slot >= (uint16_t *)FEE_WRITE_LOG_LAST_ADDRESS) { + /* compact the write log into the compacted flash area */ + return eeprom_compact(); + } + + /* ok we found a place let's write our data */ + FLASH_Unlock(); + + /* Pack address and value into the same word */ + uint16_t value = (Address << 8) | DataBuf[Address]; + + /* write to flash */ + eeprom_printf("FLASH_ProgramHalfWord(0x%08lx, 0x%04x)\n", (uint32_t)empty_slot, value); + FLASH_Status status = FLASH_ProgramHalfWord((uintptr_t)empty_slot++, value); + + FLASH_Lock(); + + return status; +} + +uint8_t EEPROM_WriteDataByte(uint16_t Address, uint8_t DataByte) { + /* if the address is out-of-bounds, do nothing */ + if (Address >= FEE_DENSITY_BYTES) { + eeprom_printf("EEPROM_WriteDataByte(0x%04x, 0x%02x) [BAD ADDRESS]\n", Address, DataByte); + return FLASH_BAD_ADDRESS; + } + + /* if the value is the same, don't bother writing it */ + if (DataBuf[Address] == DataByte) { + eeprom_printf("EEPROM_WriteDataByte(0x%04x, 0x%02x) [SKIP SAME]\n", Address, DataByte); + return 0; + } + + /* keep DataBuf cache in sync */ + DataBuf[Address] = DataByte; + eeprom_printf("EEPROM_WriteDataByte DataBuf[0x%04x] = 0x%02x\n", Address, DataBuf[Address]); + + /* perform the write into flash memory */ + /* First, attempt to write directly into the compacted flash area */ + FLASH_Status status = eeprom_write_direct_entry(Address); + if (!status) { + /* Otherwise append to the write log */ + if (Address < FEE_BYTE_RANGE) { + status = eeprom_write_log_byte_entry(Address); + } else { + status = eeprom_write_log_word_entry(Address & 0xFFFE); + } + } + if (status != 0 && status != FLASH_COMPLETE) { + eeprom_printf("EEPROM_WriteDataByte [STATUS == %d]\n", status); + } + return status; +} + +uint8_t EEPROM_WriteDataWord(uint16_t Address, uint16_t DataWord) { + /* if the address is out-of-bounds, do nothing */ + if (Address >= FEE_DENSITY_BYTES) { + eeprom_printf("EEPROM_WriteDataWord(0x%04x, 0x%04x) [BAD ADDRESS]\n", Address, DataWord); + return FLASH_BAD_ADDRESS; + } + + /* Check for word alignment */ + FLASH_Status final_status = FLASH_COMPLETE; + if (Address % 2) { + final_status = EEPROM_WriteDataByte(Address, DataWord); + FLASH_Status status = EEPROM_WriteDataByte(Address + 1, DataWord >> 8); + if (status != FLASH_COMPLETE) final_status = status; + if (final_status != 0 && final_status != FLASH_COMPLETE) { + eeprom_printf("EEPROM_WriteDataWord [STATUS == %d]\n", final_status); + } + return final_status; + } + + /* if the value is the same, don't bother writing it */ + uint16_t oldValue = *(uint16_t *)(&DataBuf[Address]); + if (oldValue == DataWord) { + eeprom_printf("EEPROM_WriteDataWord(0x%04x, 0x%04x) [SKIP SAME]\n", Address, DataWord); + return 0; + } + + /* keep DataBuf cache in sync */ + *(uint16_t *)(&DataBuf[Address]) = DataWord; + eeprom_printf("EEPROM_WriteDataWord DataBuf[0x%04x] = 0x%04x\n", Address, *(uint16_t *)(&DataBuf[Address])); + + /* perform the write into flash memory */ + /* First, attempt to write directly into the compacted flash area */ + final_status = eeprom_write_direct_entry(Address); + if (!final_status) { + /* Otherwise append to the write log */ + /* Check if we need to fall back to byte write */ + if (Address < FEE_BYTE_RANGE) { + final_status = FLASH_COMPLETE; + /* Only write a byte if it has changed */ + if ((uint8_t)oldValue != (uint8_t)DataWord) { + final_status = eeprom_write_log_byte_entry(Address); + } + FLASH_Status status = FLASH_COMPLETE; + /* Only write a byte if it has changed */ + if ((oldValue >> 8) != (DataWord >> 8)) { + status = eeprom_write_log_byte_entry(Address + 1); + } + if (status != FLASH_COMPLETE) final_status = status; + } else { + final_status = eeprom_write_log_word_entry(Address); + } + } + if (final_status != 0 && final_status != FLASH_COMPLETE) { + eeprom_printf("EEPROM_WriteDataWord [STATUS == %d]\n", final_status); + } + return final_status; +} + +uint8_t EEPROM_ReadDataByte(uint16_t Address) { + uint8_t DataByte = 0xFF; + + if (Address < FEE_DENSITY_BYTES) { + DataByte = DataBuf[Address]; + } + + eeprom_printf("EEPROM_ReadDataByte(0x%04x): 0x%02x\n", Address, DataByte); + + return DataByte; +} + +uint16_t EEPROM_ReadDataWord(uint16_t Address) { + uint16_t DataWord = 0xFFFF; + + if (Address < FEE_DENSITY_BYTES - 1) { + /* Check word alignment */ + if (Address % 2) { + DataWord = DataBuf[Address] | (DataBuf[Address + 1] << 8); + } else { + DataWord = *(uint16_t *)(&DataBuf[Address]); + } + } + + eeprom_printf("EEPROM_ReadDataWord(0x%04x): 0x%04x\n", Address, DataWord); + + return DataWord; +} + +/***************************************************************************** + * Bind to eeprom_driver.c + *******************************************************************************/ +void eeprom_driver_init(void) { + EEPROM_Init(); +} + +void eeprom_driver_erase(void) { + EEPROM_Erase(); +} + +void eeprom_read_block(void *buf, const void *addr, size_t len) { + const uint8_t *src = (const uint8_t *)addr; + uint8_t * dest = (uint8_t *)buf; + + /* Check word alignment */ + if (len && (uintptr_t)src % 2) { + /* Read the unaligned first byte */ + *dest++ = EEPROM_ReadDataByte((const uintptr_t)src++); + --len; + } + + uint16_t value; + bool aligned = ((uintptr_t)dest % 2 == 0); + while (len > 1) { + value = EEPROM_ReadDataWord((const uintptr_t)((uint16_t *)src)); + if (aligned) { + *(uint16_t *)dest = value; + dest += 2; + } else { + *dest++ = value; + *dest++ = value >> 8; + } + src += 2; + len -= 2; + } + if (len) { + *dest = EEPROM_ReadDataByte((const uintptr_t)src); + } +} + +void eeprom_write_block(const void *buf, void *addr, size_t len) { + uint8_t * dest = (uint8_t *)addr; + const uint8_t *src = (const uint8_t *)buf; + + /* Check word alignment */ + if (len && (uintptr_t)dest % 2) { + /* Write the unaligned first byte */ + EEPROM_WriteDataByte((uintptr_t)dest++, *src++); + --len; + } + + uint16_t value; + bool aligned = ((uintptr_t)src % 2 == 0); + while (len > 1) { + if (aligned) { + value = *(uint16_t *)src; + } else { + value = *(uint8_t *)src | (*(uint8_t *)(src + 1) << 8); + } + EEPROM_WriteDataWord((uintptr_t)((uint16_t *)dest), value); + dest += 2; + src += 2; + len -= 2; + } + + if (len) { + EEPROM_WriteDataByte((uintptr_t)dest, *src); + } +} diff --git a/platforms/chibios/drivers/eeprom/eeprom_stm32.h b/platforms/chibios/drivers/eeprom/eeprom_stm32.h new file mode 100644 index 0000000000..8fcfb556b8 --- /dev/null +++ b/platforms/chibios/drivers/eeprom/eeprom_stm32.h @@ -0,0 +1,33 @@ +/* + * This software is experimental and a work in progress. + * Under no circumstances should these files be used in relation to any critical system(s). + * Use of these files is at your own risk. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, + * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR + * PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE + * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * This files are free to use from http://engsta.com/stm32-flash-memory-eeprom-emulator/ by + * Artur F. + * + * Modifications for QMK and STM32F303 by Yiancar + * + * This library assumes 8-bit data locations. To add a new MCU, please provide the flash + * page size and the total flash size in Kb. The number of available pages must be a multiple + * of 2. Only half of the pages account for the total EEPROM size. + * This library also assumes that the pages are not used by the firmware. + */ + +#pragma once + +uint16_t EEPROM_Init(void); +void EEPROM_Erase(void); +uint8_t EEPROM_WriteDataByte(uint16_t Address, uint8_t DataByte); +uint8_t EEPROM_WriteDataWord(uint16_t Address, uint16_t DataWord); +uint8_t EEPROM_ReadDataByte(uint16_t Address); +uint16_t EEPROM_ReadDataWord(uint16_t Address); + +void print_eeprom(void); diff --git a/platforms/chibios/drivers/eeprom/eeprom_stm32_defs.h b/platforms/chibios/drivers/eeprom/eeprom_stm32_defs.h new file mode 100644 index 0000000000..57d0440330 --- /dev/null +++ b/platforms/chibios/drivers/eeprom/eeprom_stm32_defs.h @@ -0,0 +1,136 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include <hal.h> + +#if !defined(FEE_PAGE_SIZE) || !defined(FEE_PAGE_COUNT) +# if defined(STM32F103xB) || defined(STM32F042x6) || defined(GD32VF103C8) || defined(GD32VF103CB) +# ifndef FEE_PAGE_SIZE +# define FEE_PAGE_SIZE 0x400 // Page size = 1KByte +# endif +# ifndef FEE_PAGE_COUNT +# define FEE_PAGE_COUNT 2 // How many pages are used +# endif +# elif defined(STM32F103xE) || defined(STM32F303xC) || defined(STM32F303xE) || defined(STM32F072xB) || defined(STM32F070xB) +# ifndef FEE_PAGE_SIZE +# define FEE_PAGE_SIZE 0x800 // Page size = 2KByte +# endif +# ifndef FEE_PAGE_COUNT +# define FEE_PAGE_COUNT 4 // How many pages are used +# endif +# elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F405xG) || defined(STM32F411xE) +# ifndef FEE_PAGE_SIZE +# define FEE_PAGE_SIZE 0x4000 // Page size = 16KByte +# endif +# ifndef FEE_PAGE_COUNT +# define FEE_PAGE_COUNT 1 // How many pages are used +# endif +# endif +#endif + +#if !defined(FEE_MCU_FLASH_SIZE) +# if defined(STM32F042x6) +# define FEE_MCU_FLASH_SIZE 32 // Size in Kb +# elif defined(GD32VF103C8) +# define FEE_MCU_FLASH_SIZE 64 // Size in Kb +# elif defined(STM32F103xB) || defined(STM32F072xB) || defined(STM32F070xB) || defined(GD32VF103CB) +# define FEE_MCU_FLASH_SIZE 128 // Size in Kb +# elif defined(STM32F303xC) || defined(STM32F401xC) +# define FEE_MCU_FLASH_SIZE 256 // Size in Kb +# elif defined(STM32F103xE) || defined(STM32F303xE) || defined(STM32F401xE) || defined(STM32F411xE) +# define FEE_MCU_FLASH_SIZE 512 // Size in Kb +# elif defined(STM32F405xG) +# define FEE_MCU_FLASH_SIZE 1024 // Size in Kb +# endif +#endif + +/* Start of the emulated eeprom */ +#if !defined(FEE_PAGE_BASE_ADDRESS) +# if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F405xG) || defined(STM32F411xE) +# ifndef FEE_PAGE_BASE_ADDRESS +# define FEE_PAGE_BASE_ADDRESS 0x08004000 // bodge to force 2nd 16k page +# endif +# else +# ifndef FEE_FLASH_BASE +# define FEE_FLASH_BASE 0x8000000 +# endif +/* Default to end of flash */ +# define FEE_PAGE_BASE_ADDRESS ((uintptr_t)(FEE_FLASH_BASE) + FEE_MCU_FLASH_SIZE * 1024 - (FEE_PAGE_COUNT * FEE_PAGE_SIZE)) +# endif +#endif + +/* Addressable range 16KByte: 0 <-> (0x1FFF << 1) */ +#define FEE_ADDRESS_MAX_SIZE 0x4000 + +/* Size of combined compacted eeprom and write log pages */ +#define FEE_DENSITY_MAX_SIZE (FEE_PAGE_COUNT * FEE_PAGE_SIZE) + +#ifndef FEE_MCU_FLASH_SIZE_IGNORE_CHECK /* *TODO: Get rid of this check */ +# if FEE_DENSITY_MAX_SIZE > (FEE_MCU_FLASH_SIZE * 1024) +# pragma message STR(FEE_DENSITY_MAX_SIZE) " > " STR(FEE_MCU_FLASH_SIZE * 1024) +# error emulated eeprom: FEE_DENSITY_MAX_SIZE is greater than available flash size +# endif +#endif + +/* Size of emulated eeprom */ +#ifdef FEE_DENSITY_BYTES +# if (FEE_DENSITY_BYTES > FEE_DENSITY_MAX_SIZE) +# pragma message STR(FEE_DENSITY_BYTES) " > " STR(FEE_DENSITY_MAX_SIZE) +# error emulated eeprom: FEE_DENSITY_BYTES exceeds FEE_DENSITY_MAX_SIZE +# endif +# if (FEE_DENSITY_BYTES == FEE_DENSITY_MAX_SIZE) +# pragma message STR(FEE_DENSITY_BYTES) " == " STR(FEE_DENSITY_MAX_SIZE) +# warning emulated eeprom: FEE_DENSITY_BYTES leaves no room for a write log. This will greatly increase the flash wear rate! +# endif +# if FEE_DENSITY_BYTES > FEE_ADDRESS_MAX_SIZE +# pragma message STR(FEE_DENSITY_BYTES) " > " STR(FEE_ADDRESS_MAX_SIZE) +# error emulated eeprom: FEE_DENSITY_BYTES is greater than FEE_ADDRESS_MAX_SIZE allows +# endif +# if ((FEE_DENSITY_BYTES) % 2) == 1 +# error emulated eeprom: FEE_DENSITY_BYTES must be even +# endif +#else +/* Default to half of allocated space used for emulated eeprom, half for write log */ +# define FEE_DENSITY_BYTES (FEE_PAGE_COUNT * FEE_PAGE_SIZE / 2) +#endif + +/* Size of write log */ +#ifdef FEE_WRITE_LOG_BYTES +# if ((FEE_DENSITY_BYTES + FEE_WRITE_LOG_BYTES) > FEE_DENSITY_MAX_SIZE) +# pragma message STR(FEE_DENSITY_BYTES) " + " STR(FEE_WRITE_LOG_BYTES) " > " STR(FEE_DENSITY_MAX_SIZE) +# error emulated eeprom: FEE_WRITE_LOG_BYTES exceeds remaining FEE_DENSITY_MAX_SIZE +# endif +# if ((FEE_WRITE_LOG_BYTES) % 2) == 1 +# error emulated eeprom: FEE_WRITE_LOG_BYTES must be even +# endif +#else +/* Default to use all remaining space */ +# define FEE_WRITE_LOG_BYTES (FEE_PAGE_COUNT * FEE_PAGE_SIZE - FEE_DENSITY_BYTES) +#endif + +/* Start of the emulated eeprom compacted flash area */ +#define FEE_COMPACTED_BASE_ADDRESS FEE_PAGE_BASE_ADDRESS +/* End of the emulated eeprom compacted flash area */ +#define FEE_COMPACTED_LAST_ADDRESS (FEE_COMPACTED_BASE_ADDRESS + FEE_DENSITY_BYTES) +/* Start of the emulated eeprom write log */ +#define FEE_WRITE_LOG_BASE_ADDRESS FEE_COMPACTED_LAST_ADDRESS +/* End of the emulated eeprom write log */ +#define FEE_WRITE_LOG_LAST_ADDRESS (FEE_WRITE_LOG_BASE_ADDRESS + FEE_WRITE_LOG_BYTES) + +#if defined(DYNAMIC_KEYMAP_EEPROM_MAX_ADDR) && (DYNAMIC_KEYMAP_EEPROM_MAX_ADDR >= FEE_DENSITY_BYTES) +# error emulated eeprom: DYNAMIC_KEYMAP_EEPROM_MAX_ADDR is greater than the FEE_DENSITY_BYTES available +#endif diff --git a/platforms/chibios/drivers/eeprom/eeprom_teensy.c b/platforms/chibios/drivers/eeprom/eeprom_teensy.c new file mode 100644 index 0000000000..c8777febde --- /dev/null +++ b/platforms/chibios/drivers/eeprom/eeprom_teensy.c @@ -0,0 +1,546 @@ +#include <ch.h> +#include <hal.h> + +#include "eeprom_teensy.h" +#include "eeconfig.h" + +/*************************************/ +/* Hardware backend */ +/* */ +/* Code from PJRC/Teensyduino */ +/*************************************/ + +/* Teensyduino Core Library + * http://www.pjrc.com/teensy/ + * Copyright (c) 2013 PJRC.COM, LLC. + * + * Permission is hereby granted, free of charge, to any person obtaining + * a copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sublicense, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * 1. The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * 2. If the Software is incorporated into a build system that allows + * selection among a list of target devices, then similar target + * devices manufactured by PJRC.COM must be included in the list of + * target devices and selectable in the same manner. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#if defined(K20x) /* chip selection */ +/* Teensy 3.0, 3.1, 3.2; mchck; infinity keyboard */ + +/* + ^^^ Here be dragons: + NXP AppNote AN4282 section 3.1 states that partitioning must only be done once. + Once EEPROM partitioning is done, the size is locked to this initial configuration. + Attempts to modify the EEPROM_SIZE setting may brick your board. +*/ + +// Writing unaligned 16 or 32 bit data is handled automatically when +// this is defined, but at a cost of extra code size. Without this, +// any unaligned write will cause a hard fault exception! If you're +// absolutely sure all 16 and 32 bit writes will be aligned, you can +// remove the extra unnecessary code. +// +# define HANDLE_UNALIGNED_WRITES + +// Minimum EEPROM Endurance +// ------------------------ +# if (EEPROM_SIZE == 2048) // 35000 writes/byte or 70000 writes/word +# define EEESIZE 0x33 +# elif (EEPROM_SIZE == 1024) // 75000 writes/byte or 150000 writes/word +# define EEESIZE 0x34 +# elif (EEPROM_SIZE == 512) // 155000 writes/byte or 310000 writes/word +# define EEESIZE 0x35 +# elif (EEPROM_SIZE == 256) // 315000 writes/byte or 630000 writes/word +# define EEESIZE 0x36 +# elif (EEPROM_SIZE == 128) // 635000 writes/byte or 1270000 writes/word +# define EEESIZE 0x37 +# elif (EEPROM_SIZE == 64) // 1275000 writes/byte or 2550000 writes/word +# define EEESIZE 0x38 +# elif (EEPROM_SIZE == 32) // 2555000 writes/byte or 5110000 writes/word +# define EEESIZE 0x39 +# endif + +/** \brief eeprom initialization + * + * FIXME: needs doc + */ +void eeprom_initialize(void) { + uint32_t count = 0; + uint16_t do_flash_cmd[] = {0xf06f, 0x037f, 0x7003, 0x7803, 0xf013, 0x0f80, 0xd0fb, 0x4770}; + uint8_t status; + + if (FTFL->FCNFG & FTFL_FCNFG_RAMRDY) { + // FlexRAM is configured as traditional RAM + // We need to reconfigure for EEPROM usage + FTFL->FCCOB0 = 0x80; // PGMPART = Program Partition Command + FTFL->FCCOB4 = EEESIZE; // EEPROM Size + FTFL->FCCOB5 = 0x03; // 0K for Dataflash, 32K for EEPROM backup + __disable_irq(); + // do_flash_cmd() must execute from RAM. Luckily the C syntax is simple... + (*((void (*)(volatile uint8_t *))((uint32_t)do_flash_cmd | 1)))(&(FTFL->FSTAT)); + __enable_irq(); + status = FTFL->FSTAT; + if (status & (FTFL_FSTAT_RDCOLERR | FTFL_FSTAT_ACCERR | FTFL_FSTAT_FPVIOL)) { + FTFL->FSTAT = (status & (FTFL_FSTAT_RDCOLERR | FTFL_FSTAT_ACCERR | FTFL_FSTAT_FPVIOL)); + return; // error + } + } + // wait for eeprom to become ready (is this really necessary?) + while (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) { + if (++count > 20000) break; + } +} + +# define FlexRAM ((uint8_t *)0x14000000) + +/** \brief eeprom read byte + * + * FIXME: needs doc + */ +uint8_t eeprom_read_byte(const uint8_t *addr) { + uint32_t offset = (uint32_t)addr; + if (offset >= EEPROM_SIZE) return 0; + if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); + return FlexRAM[offset]; +} + +/** \brief eeprom read word + * + * FIXME: needs doc + */ +uint16_t eeprom_read_word(const uint16_t *addr) { + uint32_t offset = (uint32_t)addr; + if (offset >= EEPROM_SIZE - 1) return 0; + if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); + return *(uint16_t *)(&FlexRAM[offset]); +} + +/** \brief eeprom read dword + * + * FIXME: needs doc + */ +uint32_t eeprom_read_dword(const uint32_t *addr) { + uint32_t offset = (uint32_t)addr; + if (offset >= EEPROM_SIZE - 3) return 0; + if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); + return *(uint32_t *)(&FlexRAM[offset]); +} + +/** \brief eeprom read block + * + * FIXME: needs doc + */ +void eeprom_read_block(void *buf, const void *addr, uint32_t len) { + uint32_t offset = (uint32_t)addr; + uint8_t *dest = (uint8_t *)buf; + uint32_t end = offset + len; + + if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); + if (end > EEPROM_SIZE) end = EEPROM_SIZE; + while (offset < end) { + *dest++ = FlexRAM[offset++]; + } +} + +/** \brief eeprom is ready + * + * FIXME: needs doc + */ +int eeprom_is_ready(void) { + return (FTFL->FCNFG & FTFL_FCNFG_EEERDY) ? 1 : 0; +} + +/** \brief flexram wait + * + * FIXME: needs doc + */ +static void flexram_wait(void) { + while (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) { + // TODO: timeout + } +} + +/** \brief eeprom_write_byte + * + * FIXME: needs doc + */ +void eeprom_write_byte(uint8_t *addr, uint8_t value) { + uint32_t offset = (uint32_t)addr; + + if (offset >= EEPROM_SIZE) return; + if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); + if (FlexRAM[offset] != value) { + FlexRAM[offset] = value; + flexram_wait(); + } +} + +/** \brief eeprom write word + * + * FIXME: needs doc + */ +void eeprom_write_word(uint16_t *addr, uint16_t value) { + uint32_t offset = (uint32_t)addr; + + if (offset >= EEPROM_SIZE - 1) return; + if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); +# ifdef HANDLE_UNALIGNED_WRITES + if ((offset & 1) == 0) { +# endif + if (*(uint16_t *)(&FlexRAM[offset]) != value) { + *(uint16_t *)(&FlexRAM[offset]) = value; + flexram_wait(); + } +# ifdef HANDLE_UNALIGNED_WRITES + } else { + if (FlexRAM[offset] != value) { + FlexRAM[offset] = value; + flexram_wait(); + } + if (FlexRAM[offset + 1] != (value >> 8)) { + FlexRAM[offset + 1] = value >> 8; + flexram_wait(); + } + } +# endif +} + +/** \brief eeprom write dword + * + * FIXME: needs doc + */ +void eeprom_write_dword(uint32_t *addr, uint32_t value) { + uint32_t offset = (uint32_t)addr; + + if (offset >= EEPROM_SIZE - 3) return; + if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); +# ifdef HANDLE_UNALIGNED_WRITES + switch (offset & 3) { + case 0: +# endif + if (*(uint32_t *)(&FlexRAM[offset]) != value) { + *(uint32_t *)(&FlexRAM[offset]) = value; + flexram_wait(); + } + return; +# ifdef HANDLE_UNALIGNED_WRITES + case 2: + if (*(uint16_t *)(&FlexRAM[offset]) != value) { + *(uint16_t *)(&FlexRAM[offset]) = value; + flexram_wait(); + } + if (*(uint16_t *)(&FlexRAM[offset + 2]) != (value >> 16)) { + *(uint16_t *)(&FlexRAM[offset + 2]) = value >> 16; + flexram_wait(); + } + return; + default: + if (FlexRAM[offset] != value) { + FlexRAM[offset] = value; + flexram_wait(); + } + if (*(uint16_t *)(&FlexRAM[offset + 1]) != (value >> 8)) { + *(uint16_t *)(&FlexRAM[offset + 1]) = value >> 8; + flexram_wait(); + } + if (FlexRAM[offset + 3] != (value >> 24)) { + FlexRAM[offset + 3] = value >> 24; + flexram_wait(); + } + } +# endif +} + +/** \brief eeprom write block + * + * FIXME: needs doc + */ +void eeprom_write_block(const void *buf, void *addr, uint32_t len) { + uint32_t offset = (uint32_t)addr; + const uint8_t *src = (const uint8_t *)buf; + + if (offset >= EEPROM_SIZE) return; + if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); + if (len >= EEPROM_SIZE) len = EEPROM_SIZE; + if (offset + len >= EEPROM_SIZE) len = EEPROM_SIZE - offset; + while (len > 0) { + uint32_t lsb = offset & 3; + if (lsb == 0 && len >= 4) { + // write aligned 32 bits + uint32_t val32; + val32 = *src++; + val32 |= (*src++ << 8); + val32 |= (*src++ << 16); + val32 |= (*src++ << 24); + if (*(uint32_t *)(&FlexRAM[offset]) != val32) { + *(uint32_t *)(&FlexRAM[offset]) = val32; + flexram_wait(); + } + offset += 4; + len -= 4; + } else if ((lsb == 0 || lsb == 2) && len >= 2) { + // write aligned 16 bits + uint16_t val16; + val16 = *src++; + val16 |= (*src++ << 8); + if (*(uint16_t *)(&FlexRAM[offset]) != val16) { + *(uint16_t *)(&FlexRAM[offset]) = val16; + flexram_wait(); + } + offset += 2; + len -= 2; + } else { + // write 8 bits + uint8_t val8 = *src++; + if (FlexRAM[offset] != val8) { + FlexRAM[offset] = val8; + flexram_wait(); + } + offset++; + len--; + } + } +} + +/* +void do_flash_cmd(volatile uint8_t *fstat) +{ + *fstat = 0x80; + while ((*fstat & 0x80) == 0) ; // wait +} +00000000 <do_flash_cmd>: + 0: f06f 037f mvn.w r3, #127 ; 0x7f + 4: 7003 strb r3, [r0, #0] + 6: 7803 ldrb r3, [r0, #0] + 8: f013 0f80 tst.w r3, #128 ; 0x80 + c: d0fb beq.n 6 <do_flash_cmd+0x6> + e: 4770 bx lr +*/ + +#elif defined(KL2x) /* chip selection */ +/* Teensy LC (emulated) */ + +# define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0)) + +extern uint32_t __eeprom_workarea_start__; +extern uint32_t __eeprom_workarea_end__; + +static uint32_t flashend = 0; + +void eeprom_initialize(void) { + const uint16_t *p = (uint16_t *)SYMVAL(__eeprom_workarea_start__); + + do { + if (*p++ == 0xFFFF) { + flashend = (uint32_t)(p - 2); + return; + } + } while (p < (uint16_t *)SYMVAL(__eeprom_workarea_end__)); + flashend = (uint32_t)(p - 1); +} + +uint8_t eeprom_read_byte(const uint8_t *addr) { + uint32_t offset = (uint32_t)addr; + const uint16_t *p = (uint16_t *)SYMVAL(__eeprom_workarea_start__); + const uint16_t *end = (const uint16_t *)((uint32_t)flashend); + uint16_t val; + uint8_t data = 0xFF; + + if (!end) { + eeprom_initialize(); + end = (const uint16_t *)((uint32_t)flashend); + } + if (offset < EEPROM_SIZE) { + while (p <= end) { + val = *p++; + if ((val & 255) == offset) data = val >> 8; + } + } + return data; +} + +static void flash_write(const uint16_t *code, uint32_t addr, uint32_t data) { + // with great power comes great responsibility.... + uint32_t stat; + *(uint32_t *)&(FTFA->FCCOB3) = 0x06000000 | (addr & 0x00FFFFFC); + *(uint32_t *)&(FTFA->FCCOB7) = data; + __disable_irq(); + (*((void (*)(volatile uint8_t *))((uint32_t)code | 1)))(&(FTFA->FSTAT)); + __enable_irq(); + stat = FTFA->FSTAT & (FTFA_FSTAT_RDCOLERR | FTFA_FSTAT_ACCERR | FTFA_FSTAT_FPVIOL); + if (stat) { + FTFA->FSTAT = stat; + } + MCM->PLACR |= MCM_PLACR_CFCC; +} + +void eeprom_write_byte(uint8_t *addr, uint8_t data) { + uint32_t offset = (uint32_t)addr; + const uint16_t *p, *end = (const uint16_t *)((uint32_t)flashend); + uint32_t i, val, flashaddr; + uint16_t do_flash_cmd[] = {0x2380, 0x7003, 0x7803, 0xb25b, 0x2b00, 0xdafb, 0x4770}; + uint8_t buf[EEPROM_SIZE]; + + if (offset >= EEPROM_SIZE) return; + if (!end) { + eeprom_initialize(); + end = (const uint16_t *)((uint32_t)flashend); + } + if (++end < (uint16_t *)SYMVAL(__eeprom_workarea_end__)) { + val = (data << 8) | offset; + flashaddr = (uint32_t)end; + flashend = flashaddr; + if ((flashaddr & 2) == 0) { + val |= 0xFFFF0000; + } else { + val <<= 16; + val |= 0x0000FFFF; + } + flash_write(do_flash_cmd, flashaddr, val); + } else { + for (i = 0; i < EEPROM_SIZE; i++) { + buf[i] = 0xFF; + } + val = 0; + for (p = (uint16_t *)SYMVAL(__eeprom_workarea_start__); p < (uint16_t *)SYMVAL(__eeprom_workarea_end__); p++) { + val = *p; + if ((val & 255) < EEPROM_SIZE) { + buf[val & 255] = val >> 8; + } + } + buf[offset] = data; + for (flashaddr = (uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_start__); flashaddr < (uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_end__); flashaddr += 1024) { + *(uint32_t *)&(FTFA->FCCOB3) = 0x09000000 | flashaddr; + __disable_irq(); + (*((void (*)(volatile uint8_t *))((uint32_t)do_flash_cmd | 1)))(&(FTFA->FSTAT)); + __enable_irq(); + val = FTFA->FSTAT & (FTFA_FSTAT_RDCOLERR | FTFA_FSTAT_ACCERR | FTFA_FSTAT_FPVIOL); + ; + if (val) FTFA->FSTAT = val; + MCM->PLACR |= MCM_PLACR_CFCC; + } + flashaddr = (uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_start__); + for (i = 0; i < EEPROM_SIZE; i++) { + if (buf[i] == 0xFF) continue; + if ((flashaddr & 2) == 0) { + val = (buf[i] << 8) | i; + } else { + val = val | (buf[i] << 24) | (i << 16); + flash_write(do_flash_cmd, flashaddr, val); + } + flashaddr += 2; + } + flashend = flashaddr; + if ((flashaddr & 2)) { + val |= 0xFFFF0000; + flash_write(do_flash_cmd, flashaddr, val); + } + } +} + +/* +void do_flash_cmd(volatile uint8_t *fstat) +{ + *fstat = 0x80; + while ((*fstat & 0x80) == 0) ; // wait +} +00000000 <do_flash_cmd>: + 0: 2380 movs r3, #128 ; 0x80 + 2: 7003 strb r3, [r0, #0] + 4: 7803 ldrb r3, [r0, #0] + 6: b25b sxtb r3, r3 + 8: 2b00 cmp r3, #0 + a: dafb bge.n 4 <do_flash_cmd+0x4> + c: 4770 bx lr +*/ + +uint16_t eeprom_read_word(const uint16_t *addr) { + const uint8_t *p = (const uint8_t *)addr; + return eeprom_read_byte(p) | (eeprom_read_byte(p + 1) << 8); +} + +uint32_t eeprom_read_dword(const uint32_t *addr) { + const uint8_t *p = (const uint8_t *)addr; + return eeprom_read_byte(p) | (eeprom_read_byte(p + 1) << 8) | (eeprom_read_byte(p + 2) << 16) | (eeprom_read_byte(p + 3) << 24); +} + +void eeprom_read_block(void *buf, const void *addr, uint32_t len) { + const uint8_t *p = (const uint8_t *)addr; + uint8_t * dest = (uint8_t *)buf; + while (len--) { + *dest++ = eeprom_read_byte(p++); + } +} + +int eeprom_is_ready(void) { + return 1; +} + +void eeprom_write_word(uint16_t *addr, uint16_t value) { + uint8_t *p = (uint8_t *)addr; + eeprom_write_byte(p++, value); + eeprom_write_byte(p, value >> 8); +} + +void eeprom_write_dword(uint32_t *addr, uint32_t value) { + uint8_t *p = (uint8_t *)addr; + eeprom_write_byte(p++, value); + eeprom_write_byte(p++, value >> 8); + eeprom_write_byte(p++, value >> 16); + eeprom_write_byte(p, value >> 24); +} + +void eeprom_write_block(const void *buf, void *addr, uint32_t len) { + uint8_t * p = (uint8_t *)addr; + const uint8_t *src = (const uint8_t *)buf; + while (len--) { + eeprom_write_byte(p++, *src++); + } +} + +#else +# error Unsupported Teensy EEPROM. +#endif /* chip selection */ +// The update functions just calls write for now, but could probably be optimized + +void eeprom_update_byte(uint8_t *addr, uint8_t value) { + eeprom_write_byte(addr, value); +} + +void eeprom_update_word(uint16_t *addr, uint16_t value) { + uint8_t *p = (uint8_t *)addr; + eeprom_write_byte(p++, value); + eeprom_write_byte(p, value >> 8); +} + +void eeprom_update_dword(uint32_t *addr, uint32_t value) { + uint8_t *p = (uint8_t *)addr; + eeprom_write_byte(p++, value); + eeprom_write_byte(p++, value >> 8); + eeprom_write_byte(p++, value >> 16); + eeprom_write_byte(p, value >> 24); +} + +void eeprom_update_block(const void *buf, void *addr, size_t len) { + uint8_t * p = (uint8_t *)addr; + const uint8_t *src = (const uint8_t *)buf; + while (len--) { + eeprom_write_byte(p++, *src++); + } +} diff --git a/platforms/chibios/drivers/eeprom/eeprom_teensy.h b/platforms/chibios/drivers/eeprom/eeprom_teensy.h new file mode 100755 index 0000000000..9a14a1fa79 --- /dev/null +++ b/platforms/chibios/drivers/eeprom/eeprom_teensy.h @@ -0,0 +1,25 @@ +// Copyright 2022 Nick Brassel (@tzarc) +// SPDX-License-Identifier: GPL-2.0-or-later +#pragma once + +#include <ch.h> +#include <hal.h> + +#if defined(K20x) +/* Teensy 3.0, 3.1, 3.2; mchck; infinity keyboard */ +// The EEPROM is really RAM with a hardware-based backup system to +// flash memory. Selecting a smaller size EEPROM allows more wear +// leveling, for higher write endurance. If you edit this file, +// set this to the smallest size your application can use. Also, +// due to Freescale's implementation, writing 16 or 32 bit words +// (aligned to 2 or 4 byte boundaries) has twice the endurance +// compared to writing 8 bit bytes. +// +# ifndef EEPROM_SIZE +# define EEPROM_SIZE 32 +# endif +#elif defined(KL2x) /* Teensy LC (emulated) */ +# define EEPROM_SIZE 128 +#else +# error Unsupported Teensy EEPROM. +#endif diff --git a/platforms/chibios/drivers/flash/flash_stm32.c b/platforms/chibios/drivers/flash/flash_stm32.c new file mode 100644 index 0000000000..72c41b8b78 --- /dev/null +++ b/platforms/chibios/drivers/flash/flash_stm32.c @@ -0,0 +1,208 @@ +/* + * This software is experimental and a work in progress. + * Under no circumstances should these files be used in relation to any critical system(s). + * Use of these files is at your own risk. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, + * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR + * PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE + * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * This files are free to use from https://github.com/rogerclarkmelbourne/Arduino_STM32 and + * https://github.com/leaflabs/libmaple + * + * Modifications for QMK and STM32F303 by Yiancar + */ + +#include <hal.h> +#include "flash_stm32.h" + +#if defined(STM32F1XX) +# define FLASH_SR_WRPERR FLASH_SR_WRPRTERR +#endif + +#if defined(MCU_GD32V) +/* GigaDevice GD32VF103 is a STM32F103 clone at heart. */ +# include "gd32v_compatibility.h" +#endif + +#if defined(STM32F4XX) +# define FLASH_SR_PGERR (FLASH_SR_PGSERR | FLASH_SR_PGPERR | FLASH_SR_PGAERR) + +# define FLASH_KEY1 0x45670123U +# define FLASH_KEY2 0xCDEF89ABU + +static uint8_t ADDR2PAGE(uint32_t Page_Address) { + switch (Page_Address) { + case 0x08000000 ... 0x08003FFF: + return 0; + case 0x08004000 ... 0x08007FFF: + return 1; + case 0x08008000 ... 0x0800BFFF: + return 2; + case 0x0800C000 ... 0x0800FFFF: + return 3; + } + + // TODO: bad times... + return 7; +} +#endif + +/* Delay definition */ +#define EraseTimeout ((uint32_t)0x00000FFF) +#define ProgramTimeout ((uint32_t)0x0000001F) + +#define ASSERT(exp) (void)((0)) + +/** + * @brief Inserts a time delay. + * @param None + * @retval None + */ +static void delay(void) { + __IO uint32_t i = 0; + for (i = 0xFF; i != 0; i--) { + } +} + +/** + * @brief Returns the FLASH Status. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE + */ +FLASH_Status FLASH_GetStatus(void) { + if ((FLASH->SR & FLASH_SR_BSY) == FLASH_SR_BSY) return FLASH_BUSY; + + if ((FLASH->SR & FLASH_SR_PGERR) != 0) return FLASH_ERROR_PG; + + if ((FLASH->SR & FLASH_SR_WRPERR) != 0) return FLASH_ERROR_WRP; + +#if defined(FLASH_OBR_OPTERR) + if ((FLASH->SR & FLASH_OBR_OPTERR) != 0) return FLASH_ERROR_OPT; +#endif + + return FLASH_COMPLETE; +} + +/** + * @brief Waits for a Flash operation to complete or a TIMEOUT to occur. + * @param Timeout: FLASH progamming Timeout + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout) { + FLASH_Status status; + + /* Check for the Flash Status */ + status = FLASH_GetStatus(); + /* Wait for a Flash operation to complete or a TIMEOUT to occur */ + while ((status == FLASH_BUSY) && (Timeout != 0x00)) { + delay(); + status = FLASH_GetStatus(); + Timeout--; + } + if (Timeout == 0) status = FLASH_TIMEOUT; + /* Return the operation status */ + return status; +} + +/** + * @brief Erases a specified FLASH page. + * @param Page_Address: The page address to be erased. + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ErasePage(uint32_t Page_Address) { + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + ASSERT(IS_FLASH_ADDRESS(Page_Address)); + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + if (status == FLASH_COMPLETE) { + /* if the previous operation is completed, proceed to erase the page */ +#if defined(FLASH_CR_SNB) + FLASH->CR &= ~FLASH_CR_SNB; + FLASH->CR |= FLASH_CR_SER | (ADDR2PAGE(Page_Address) << FLASH_CR_SNB_Pos); +#else + FLASH->CR |= FLASH_CR_PER; + FLASH->AR = Page_Address; +#endif + FLASH->CR |= FLASH_CR_STRT; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + if (status != FLASH_TIMEOUT) { + /* if the erase operation is completed, disable the configured Bits */ +#if defined(FLASH_CR_SNB) + FLASH->CR &= ~(FLASH_CR_SER | FLASH_CR_SNB); +#else + FLASH->CR &= ~FLASH_CR_PER; +#endif + } + FLASH->SR = (FLASH_SR_EOP | FLASH_SR_PGERR | FLASH_SR_WRPERR); + } + /* Return the Erase Status */ + return status; +} + +/** + * @brief Programs a half word at a specified address. + * @param Address: specifies the address to be programmed. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) { + FLASH_Status status = FLASH_BAD_ADDRESS; + + if (IS_FLASH_ADDRESS(Address)) { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if (status == FLASH_COMPLETE) { + /* if the previous operation is completed, proceed to program the new data */ + +#if defined(FLASH_CR_PSIZE) + FLASH->CR &= ~FLASH_CR_PSIZE; + FLASH->CR |= FLASH_CR_PSIZE_0; +#endif + FLASH->CR |= FLASH_CR_PG; + *(__IO uint16_t*)Address = Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if (status != FLASH_TIMEOUT) { + /* if the program operation is completed, disable the PG Bit */ + FLASH->CR &= ~FLASH_CR_PG; + } + FLASH->SR = (FLASH_SR_EOP | FLASH_SR_PGERR | FLASH_SR_WRPERR); + } + } + return status; +} + +/** + * @brief Unlocks the FLASH Program Erase Controller. + * @param None + * @retval None + */ +void FLASH_Unlock(void) { + if (FLASH->CR & FLASH_CR_LOCK) { + /* Authorize the FPEC Access */ + FLASH->KEYR = FLASH_KEY1; + FLASH->KEYR = FLASH_KEY2; + } +} + +/** + * @brief Locks the FLASH Program Erase Controller. + * @param None + * @retval None + */ +void FLASH_Lock(void) { + /* Set the Lock Bit to lock the FPEC and the FCR */ + FLASH->CR |= FLASH_CR_LOCK; +} diff --git a/platforms/chibios/drivers/flash/flash_stm32.h b/platforms/chibios/drivers/flash/flash_stm32.h new file mode 100644 index 0000000000..6c66642ec5 --- /dev/null +++ b/platforms/chibios/drivers/flash/flash_stm32.h @@ -0,0 +1,44 @@ +/* + * This software is experimental and a work in progress. + * Under no circumstances should these files be used in relation to any critical system(s). + * Use of these files is at your own risk. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, + * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR + * PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE + * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * This files are free to use from https://github.com/rogerclarkmelbourne/Arduino_STM32 and + * https://github.com/leaflabs/libmaple + * + * Modifications for QMK and STM32F303 by Yiancar + */ + +#pragma once + +#ifdef __cplusplus +extern "C" { +#endif + +#include <stdint.h> + +#ifdef FLASH_STM32_MOCKED +extern uint8_t FlashBuf[MOCK_FLASH_SIZE]; +#endif + +typedef enum { FLASH_BUSY = 1, FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_ERROR_OPT, FLASH_COMPLETE, FLASH_TIMEOUT, FLASH_BAD_ADDRESS } FLASH_Status; + +#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x0807FFFF)) + +FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout); +FLASH_Status FLASH_ErasePage(uint32_t Page_Address); +FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data); + +void FLASH_Unlock(void); +void FLASH_Lock(void); + +#ifdef __cplusplus +} +#endif diff --git a/platforms/chibios/drivers/i2c_master.c b/platforms/chibios/drivers/i2c_master.c index 21e064b1dc..4c7a5daa17 100644 --- a/platforms/chibios/drivers/i2c_master.c +++ b/platforms/chibios/drivers/i2c_master.c @@ -107,16 +107,25 @@ static const I2CConfig i2cconfig = { #endif }; -static i2c_status_t chibios_to_qmk(const msg_t* status) { - switch (*status) { - case I2C_NO_ERROR: - return I2C_STATUS_SUCCESS; - case I2C_TIMEOUT: - return I2C_STATUS_TIMEOUT; - // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT - default: - return I2C_STATUS_ERROR; +/** + * @brief Handles any I2C error condition by stopping the I2C peripheral and + * aborting any ongoing transactions. Furthermore ChibiOS status codes are + * converted into QMK codes. + * + * @param status ChibiOS specific I2C status code + * @return i2c_status_t QMK specific I2C status code + */ +static i2c_status_t i2c_epilogue(const msg_t status) { + if (status == MSG_OK) { + return I2C_STATUS_SUCCESS; } + + // From ChibiOS HAL: "After a timeout the driver must be stopped and + // restarted because the bus is in an uncertain state." We also issue that + // hard stop in case of any error. + i2c_stop(); + + return status == MSG_TIMEOUT ? I2C_STATUS_TIMEOUT : I2C_STATUS_ERROR; } __attribute__((weak)) void i2c_init(void) { @@ -149,14 +158,14 @@ i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, i2c_address = address; i2cStart(&I2C_DRIVER, &i2cconfig); msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, TIME_MS2I(timeout)); - return chibios_to_qmk(&status); + return i2c_epilogue(status); } i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = address; i2cStart(&I2C_DRIVER, &i2cconfig); msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, TIME_MS2I(timeout)); - return chibios_to_qmk(&status); + return i2c_epilogue(status); } i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) { @@ -170,7 +179,7 @@ i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, complete_packet[0] = regaddr; msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, TIME_MS2I(timeout)); - return chibios_to_qmk(&status); + return i2c_epilogue(status); } i2c_status_t i2c_writeReg16(uint8_t devaddr, uint16_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) { @@ -185,14 +194,14 @@ i2c_status_t i2c_writeReg16(uint8_t devaddr, uint16_t regaddr, const uint8_t* da complete_packet[1] = regaddr & 0xFF; msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 2, 0, 0, TIME_MS2I(timeout)); - return chibios_to_qmk(&status); + return i2c_epilogue(status); } i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = devaddr; i2cStart(&I2C_DRIVER, &i2cconfig); msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), ®addr, 1, data, length, TIME_MS2I(timeout)); - return chibios_to_qmk(&status); + return i2c_epilogue(status); } i2c_status_t i2c_readReg16(uint8_t devaddr, uint16_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { @@ -200,7 +209,7 @@ i2c_status_t i2c_readReg16(uint8_t devaddr, uint16_t regaddr, uint8_t* data, uin i2cStart(&I2C_DRIVER, &i2cconfig); uint8_t register_packet[2] = {regaddr >> 8, regaddr & 0xFF}; msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), register_packet, 2, data, length, TIME_MS2I(timeout)); - return chibios_to_qmk(&status); + return i2c_epilogue(status); } void i2c_stop(void) { diff --git a/platforms/chibios/drivers/serial.c b/platforms/chibios/drivers/serial.c index 0cff057d1d..0dd8e71ae8 100644 --- a/platforms/chibios/drivers/serial.c +++ b/platforms/chibios/drivers/serial.c @@ -20,7 +20,8 @@ # error "chSysPolledDelayX method not supported on this platform" #else # undef wait_us -# define wait_us(x) chSysPolledDelayX(US2RTC(CPU_CLOCK, x)) +// Force usage of polled waiting - in case WAIT_US_TIMER is activated +# define wait_us(us) chSysPolledDelayX(US2RTC(REALTIME_COUNTER_CLOCK, us)) #endif #ifndef SELECT_SOFT_SERIAL_SPEED @@ -87,10 +88,7 @@ static THD_FUNCTION(Thread1, arg) { chRegSetThreadName("blinker"); while (true) { palWaitLineTimeout(SOFT_SERIAL_PIN, TIME_INFINITE); - - split_shared_memory_lock(); interrupt_handler(NULL); - split_shared_memory_unlock(); } } @@ -155,6 +153,7 @@ static void __attribute__((noinline)) serial_write_byte(uint8_t data) { // interrupt handle to be used by the slave device void interrupt_handler(void *arg) { + split_shared_memory_lock_autounlock(); chSysLockFromISR(); sync_send(); @@ -212,6 +211,8 @@ void interrupt_handler(void *arg) { static inline bool initiate_transaction(uint8_t sstd_index) { if (sstd_index > NUM_TOTAL_TRANSACTIONS) return false; + split_shared_memory_lock_autounlock(); + split_transaction_desc_t *trans = &split_transaction_table[sstd_index]; // TODO: remove extra delay between transactions @@ -233,7 +234,7 @@ static inline bool initiate_transaction(uint8_t sstd_index) { // check if the slave is present if (serial_read_pin()) { // slave failed to pull the line low, assume not present - dprintf("serial::NO_RESPONSE\n"); + serial_dprintf("serial::NO_RESPONSE\n"); chSysUnlock(); return false; } @@ -269,7 +270,7 @@ static inline bool initiate_transaction(uint8_t sstd_index) { serial_delay(); if ((checksum_computed) != (checksum_received)) { - dprintf("serial::FAIL[%u,%u,%u]\n", checksum_computed, checksum_received, sstd_index); + serial_dprintf("serial::FAIL[%u,%u,%u]\n", checksum_computed, checksum_received, sstd_index); serial_output(); serial_high(); @@ -292,8 +293,5 @@ static inline bool initiate_transaction(uint8_t sstd_index) { // // this code is very time dependent, so we need to disable interrupts bool soft_serial_transaction(int sstd_index) { - split_shared_memory_lock(); - bool result = initiate_transaction((uint8_t)sstd_index); - split_shared_memory_unlock(); - return result; + return initiate_transaction((uint8_t)sstd_index); } diff --git a/platforms/chibios/drivers/serial_protocol.c b/platforms/chibios/drivers/serial_protocol.c new file mode 100644 index 0000000000..c95aed9885 --- /dev/null +++ b/platforms/chibios/drivers/serial_protocol.c @@ -0,0 +1,164 @@ +// Copyright 2022 Stefan Kerkmann +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <ch.h> + +#include "quantum.h" +#include "serial.h" +#include "serial_protocol.h" +#include "printf.h" +#include "synchronization_util.h" + +static inline bool initiate_transaction(uint8_t transaction_id); +static inline bool react_to_transaction(void); + +/** + * @brief This thread runs on the slave and responds to transactions initiated + * by the master. + */ +static THD_WORKING_AREA(waSlaveThread, 1024); +static THD_FUNCTION(SlaveThread, arg) { + (void)arg; + chRegSetThreadName("split_protocol_tx_rx"); + + while (true) { + if (unlikely(!react_to_transaction())) { + /* Clear the receive queue, to start with a clean slate. + * Parts of failed transactions or spurious bytes could still be in it. */ + serial_transport_driver_clear(); + } + } +} + +/** + * @brief Slave specific initializations. + */ +void soft_serial_target_init(void) { + serial_transport_driver_slave_init(); + + /* Start transport thread. */ + chThdCreateStatic(waSlaveThread, sizeof(waSlaveThread), HIGHPRIO, SlaveThread, NULL); +} + +/** + * @brief Master specific initializations. + */ +void soft_serial_initiator_init(void) { + serial_transport_driver_master_init(); +} + +/** + * @brief React to transactions started by the master. + */ +static inline bool react_to_transaction(void) { + uint8_t transaction_id = 0; + /* Wait until there is a transaction for us. */ + if (unlikely(!serial_transport_receive_blocking(&transaction_id, sizeof(transaction_id)))) { + return false; + } + + /* Sanity check that we are actually responding to a valid transaction. */ + if (unlikely(transaction_id >= NUM_TOTAL_TRANSACTIONS)) { + return false; + } + + split_shared_memory_lock_autounlock(); + + split_transaction_desc_t* transaction = &split_transaction_table[transaction_id]; + + /* Send back the handshake which is XORed as a simple checksum, + to signal that the slave is ready to receive possible transaction buffers */ + transaction_id ^= NUM_TOTAL_TRANSACTIONS; + if (unlikely(!serial_transport_send(&transaction_id, sizeof(transaction_id)))) { + return false; + } + + /* Receive transaction buffer from the master. If this transaction requires it.*/ + if (transaction->initiator2target_buffer_size) { + if (unlikely(!serial_transport_receive(split_trans_initiator2target_buffer(transaction), transaction->initiator2target_buffer_size))) { + return false; + } + } + + /* Allow any slave processing to occur. */ + if (transaction->slave_callback) { + transaction->slave_callback(transaction->initiator2target_buffer_size, split_trans_initiator2target_buffer(transaction), transaction->initiator2target_buffer_size, split_trans_target2initiator_buffer(transaction)); + } + + /* Send transaction buffer to the master. If this transaction requires it. */ + if (transaction->target2initiator_buffer_size) { + if (unlikely(!serial_transport_send(split_trans_target2initiator_buffer(transaction), transaction->target2initiator_buffer_size))) { + return false; + } + } + + return true; +} + +/** + * @brief Start transaction from the master half to the slave half. + * + * @param index Transaction Table index of the transaction to start. + * @return bool Indicates success of transaction. + */ +bool soft_serial_transaction(int index) { + bool result = initiate_transaction((uint8_t)index); + + if (unlikely(!result)) { + /* Clear the receive queue, to start with a clean slate. + * Parts of failed transactions or spurious bytes could still be in it. */ + serial_transport_driver_clear(); + } + + return result; +} + +/** + * @brief Initiate transaction to slave half. + */ +static inline bool initiate_transaction(uint8_t transaction_id) { + /* Sanity check that we are actually starting a valid transaction. */ + if (unlikely(transaction_id >= NUM_TOTAL_TRANSACTIONS)) { + serial_dprintf("SPLIT: illegal transaction id\n"); + return false; + } + + split_shared_memory_lock_autounlock(); + + split_transaction_desc_t* transaction = &split_transaction_table[transaction_id]; + + /* Send transaction table index to the slave, which doubles as basic handshake token. */ + if (unlikely(!serial_transport_send(&transaction_id, sizeof(transaction_id)))) { + serial_dprintf("SPLIT: sending handshake failed\n"); + return false; + } + + uint8_t transaction_id_shake = 0xFF; + + /* Which we always read back first so that we can error out correctly. + * - due to the half duplex limitations on return codes, we always have to read *something*. + * - without the read, write only transactions *always* succeed, even during the boot process where the slave is not ready. + */ + if (unlikely(!serial_transport_receive(&transaction_id_shake, sizeof(transaction_id_shake)) || (transaction_id_shake != (transaction_id ^ NUM_TOTAL_TRANSACTIONS)))) { + serial_dprintf("SPLIT: receiving handshake failed\n"); + return false; + } + + /* Send transaction buffer to the slave. If this transaction requires it. */ + if (transaction->initiator2target_buffer_size) { + if (unlikely(!serial_transport_send(split_trans_initiator2target_buffer(transaction), transaction->initiator2target_buffer_size))) { + serial_dprintf("SPLIT: sending buffer failed\n"); + return false; + } + } + + /* Receive transaction buffer from the slave. If this transaction requires it. */ + if (transaction->target2initiator_buffer_size) { + if (unlikely(!serial_transport_receive(split_trans_target2initiator_buffer(transaction), transaction->target2initiator_buffer_size))) { + serial_dprintf("SPLIT: receiving buffer failed\n"); + return false; + } + } + + return true; +} diff --git a/platforms/chibios/drivers/serial_protocol.h b/platforms/chibios/drivers/serial_protocol.h new file mode 100644 index 0000000000..4275a7f8d8 --- /dev/null +++ b/platforms/chibios/drivers/serial_protocol.h @@ -0,0 +1,49 @@ +// Copyright 2022 Stefan Kerkmann +// SPDX-License-Identifier: GPL-2.0-or-later + +#include <stddef.h> +#include <stdint.h> +#include <stdbool.h> + +#pragma once + +/** + * @brief Clears any intermediate sending or receiving state of the driver to a known good + * state. This happens after errors in the middle of transactions, to start with + * a clean slate. + */ +void serial_transport_driver_clear(void); + +/** + * @brief Driver specific initialization on the slave half. + */ +void serial_transport_driver_slave_init(void); + +/** + * @brief Driver specific specific initialization on the master half. + */ +void serial_transport_driver_master_init(void); + +/** + * @brief Blocking receive of size * bytes. + * + * @return true Receive success. + * @return false Receive failed, e.g. by bit errors. + */ +bool __attribute__((nonnull, hot)) serial_transport_receive(uint8_t* destination, const size_t size); + +/** + * @brief Blocking receive of size * bytes with an implicitly defined timeout. + * + * @return true Receive success. + * @return false Receive failed, e.g. by timeout or bit errors. + */ +bool __attribute__((nonnull, hot)) serial_transport_receive_blocking(uint8_t* destination, const size_t size); + +/** + * @brief Blocking send of buffer with timeout. + * + * @return true Send success. + * @return false Send failed, e.g. by timeout or bit errors. + */ +bool __attribute__((nonnull, hot)) serial_transport_send(const uint8_t* source, const size_t size); diff --git a/platforms/chibios/drivers/serial_usart.c b/platforms/chibios/drivers/serial_usart.c index e9fa4af7a3..6581a5b6e9 100644 --- a/platforms/chibios/drivers/serial_usart.c +++ b/platforms/chibios/drivers/serial_usart.c @@ -1,49 +1,55 @@ -/* Copyright 2021 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ +// Copyright 2021 QMK +// Copyright 2022 Stefan Kerkmann +// SPDX-License-Identifier: GPL-2.0-or-later #include "serial_usart.h" +#include "serial_protocol.h" #include "synchronization_util.h" #if defined(SERIAL_USART_CONFIG) -static SerialConfig serial_config = SERIAL_USART_CONFIG; -#else -static SerialConfig serial_config = { - .speed = (SERIAL_USART_SPEED), /* speed - mandatory */ +static QMKSerialConfig serial_config = SERIAL_USART_CONFIG; +#elif defined(MCU_STM32) /* STM32 MCUs */ +static QMKSerialConfig serial_config = { +# if HAL_USE_SERIAL + .speed = (SERIAL_USART_SPEED), +# else + .baud = (SERIAL_USART_SPEED), +# endif .cr1 = (SERIAL_USART_CR1), .cr2 = (SERIAL_USART_CR2), # if !defined(SERIAL_USART_FULL_DUPLEX) .cr3 = ((SERIAL_USART_CR3) | USART_CR3_HDSEL) /* activate half-duplex mode */ # else - .cr3 = (SERIAL_USART_CR3) + .cr3 = (SERIAL_USART_CR3) # endif }; +#elif defined(MCU_RP) /* Raspberry Pi MCUs */ +/* USART in 8E2 config with RX and TX FIFOs enabled. */ +// clang-format off +static QMKSerialConfig serial_config = { + .baud = (SERIAL_USART_SPEED), + .UARTLCR_H = UART_UARTLCR_H_WLEN_8BITS | UART_UARTLCR_H_PEN | UART_UARTLCR_H_STP2 | UART_UARTLCR_H_FEN, + .UARTCR = 0U, + .UARTIFLS = UART_UARTIFLS_RXIFLSEL_1_8F | UART_UARTIFLS_TXIFLSEL_1_8E, + .UARTDMACR = 0U +}; +// clang-format on +#else +# error MCU Familiy not supported by default, supply your own serial_config by defining SERIAL_USART_CONFIG in your keyboard files. #endif -static SerialDriver* serial_driver = &SERIAL_USART_DRIVER; +static QMKSerialDriver* serial_driver = (QMKSerialDriver*)&SERIAL_USART_DRIVER; -static inline bool react_to_transactions(void); -static inline bool __attribute__((nonnull)) receive(uint8_t* destination, const size_t size); -static inline bool __attribute__((nonnull)) send(const uint8_t* source, const size_t size); -static inline bool initiate_transaction(uint8_t sstd_index); -static inline void usart_clear(void); +#if HAL_USE_SERIAL /** - * @brief Clear the receive input queue. + * @brief SERIAL Driver startup routine. */ -static inline void usart_clear(void) { +static inline void usart_driver_start(void) { + sdStart(serial_driver, &serial_config); +} + +inline void serial_transport_driver_clear(void) { osalSysLock(); bool volatile queue_not_empty = !iqIsEmptyI(&serial_driver->iqueue); osalSysUnlock(); @@ -64,36 +70,96 @@ static inline void usart_clear(void) { } } +#elif HAL_USE_SIO + +void clear_rx_evt_cb(SIODriver* siop) { + osalSysLockFromISR(); + /* If errors occured during transactions this callback is invoked. We just + * clear the error sources and move on. We rely on the fact that we check + * for the success of the transaction by comparing the received/send bytes + * with the actual received/send bytes in the send/receive functions. */ + sioGetAndClearEventsI(serial_driver); + osalSysUnlockFromISR(); +} + +static const SIOOperation serial_usart_operation = {.rx_cb = NULL, .rx_idle_cb = NULL, .tx_cb = NULL, .tx_end_cb = NULL, .rx_evt_cb = &clear_rx_evt_cb}; + /** - * @brief Blocking send of buffer with timeout. - * - * @return true Send success. - * @return false Send failed. + * @brief SIO Driver startup routine. */ -static inline bool send(const uint8_t* source, const size_t size) { - bool success = (size_t)sdWriteTimeout(serial_driver, source, size, TIME_MS2I(SERIAL_USART_TIMEOUT)) == size; +static inline void usart_driver_start(void) { + sioStart(serial_driver, &serial_config); + sioStartOperation(serial_driver, &serial_usart_operation); +} + +inline void serial_transport_driver_clear(void) { + osalSysLock(); + while (!sioIsRXEmptyX(serial_driver)) { + (void)sioGetX(serial_driver); + } + osalSysUnlock(); +} + +#else + +# error Either the SERIAL or SIO driver has to be activated to use the usart driver for split keyboards. + +#endif + +inline bool serial_transport_send(const uint8_t* source, const size_t size) { + bool success = (size_t)chnWriteTimeout(serial_driver, source, size, TIME_MS2I(SERIAL_USART_TIMEOUT)) == size; #if !defined(SERIAL_USART_FULL_DUPLEX) - if (success) { - /* Half duplex fills the input queue with the data we wrote - just throw it away. - Under the right circumstances (e.g. bad cables paired with high baud rates) - less bytes can be present in the input queue, therefore a timeout is needed. */ - uint8_t dump[size]; - return receive(dump, size); + /* Half duplex fills the input queue with the data we wrote - just throw it away. */ + if (likely(success)) { + size_t bytes_left = size; +# if HAL_USE_SERIAL + /* The SERIAL driver uses large soft FIFOs that are filled from an IRQ + * context, so there is a delay between receiving the data and it + * becoming actually available, therefore we have to apply a timeout + * mechanism. Under the right circumstances (e.g. bad cables paired with + * high baud rates) less bytes can be present in the input queue as + * well. */ + uint8_t dump[64]; + + while (unlikely(bytes_left >= 64)) { + if (unlikely(!serial_transport_receive(dump, 64))) { + return false; + } + bytes_left -= 64; + } + + return serial_transport_receive(dump, bytes_left); +# else + /* The SIO driver directly accesses the hardware FIFOs of the USART + * peripheral. As these are limited in depth, the RX FIFO might have been + * overflowed by a large that we just send. Therefore we attempt to read + * back all the data we send or until the FIFO runs empty in case it + * overflowed and data was truncated. */ + if (unlikely(sioSynchronizeTXEnd(serial_driver, TIME_MS2I(SERIAL_USART_TIMEOUT)) < MSG_OK)) { + return false; + } + + osalSysLock(); + while (bytes_left > 0 && !sioIsRXEmptyX(serial_driver)) { + (void)sioGetX(serial_driver); + bytes_left--; + } + osalSysUnlock(); +# endif } #endif return success; } -/** - * @brief Blocking receive of size * bytes with timeout. - * - * @return true Receive success. - * @return false Receive failed. - */ -static inline bool receive(uint8_t* destination, const size_t size) { - bool success = (size_t)sdReadTimeout(serial_driver, destination, size, TIME_MS2I(SERIAL_USART_TIMEOUT)) == size; +inline bool serial_transport_receive(uint8_t* destination, const size_t size) { + bool success = (size_t)chnReadTimeout(serial_driver, destination, size, TIME_MS2I(SERIAL_USART_TIMEOUT)) == size; + return success; +} + +inline bool serial_transport_receive_blocking(uint8_t* destination, const size_t size) { + bool success = (size_t)chnRead(serial_driver, destination, size) == size; return success; } @@ -103,7 +169,7 @@ static inline bool receive(uint8_t* destination, const size_t size) { * @brief Initiate pins for USART peripheral. Half-duplex configuration. */ __attribute__((weak)) void usart_init(void) { -# if defined(MCU_STM32) +# if defined(MCU_STM32) /* STM32 MCUs */ # if defined(USE_GPIOV1) palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE_OPENDRAIN); # else @@ -113,6 +179,8 @@ __attribute__((weak)) void usart_init(void) { # if defined(USART_REMAP) USART_REMAP; # endif +# elif defined(MCU_RP) /* Raspberry Pi MCUs */ +# error Half-duplex with the SIO driver is not supported due to hardware limitations on the RP2040, switch to the PIO driver which has half-duplex support. # else # pragma message "usart_init: MCU Familiy not supported by default, please supply your own init code by implementing usart_init() in your keyboard files." # endif @@ -124,7 +192,7 @@ __attribute__((weak)) void usart_init(void) { * @brief Initiate pins for USART peripheral. Full-duplex configuration. */ __attribute__((weak)) void usart_init(void) { -# if defined(MCU_STM32) +# if defined(MCU_STM32) /* STM32 MCUs */ # if defined(USE_GPIOV1) palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE_PUSHPULL); palSetLineMode(SERIAL_USART_RX_PIN, PAL_MODE_INPUT); @@ -136,6 +204,9 @@ __attribute__((weak)) void usart_init(void) { # if defined(USART_REMAP) USART_REMAP; # endif +# elif defined(MCU_RP) /* Raspberry Pi MCUs */ + palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE_UART); + palSetLineMode(SERIAL_USART_RX_PIN, PAL_MODE_ALTERNATE_UART); # else # pragma message "usart_init: MCU Familiy not supported by default, please supply your own init code by implementing usart_init() in your keyboard files." # endif @@ -146,7 +217,7 @@ __attribute__((weak)) void usart_init(void) { /** * @brief Overridable master specific initializations. */ -__attribute__((weak, nonnull)) void usart_master_init(SerialDriver** driver) { +__attribute__((weak, nonnull)) void usart_master_init(QMKSerialDriver** driver) { (void)driver; usart_init(); } @@ -154,161 +225,22 @@ __attribute__((weak, nonnull)) void usart_master_init(SerialDriver** driver) { /** * @brief Overridable slave specific initializations. */ -__attribute__((weak, nonnull)) void usart_slave_init(SerialDriver** driver) { +__attribute__((weak, nonnull)) void usart_slave_init(QMKSerialDriver** driver) { (void)driver; usart_init(); } -/** - * @brief This thread runs on the slave and responds to transactions initiated - * by the master. - */ -static THD_WORKING_AREA(waSlaveThread, 1024); -static THD_FUNCTION(SlaveThread, arg) { - (void)arg; - chRegSetThreadName("usart_tx_rx"); - - while (true) { - if (!react_to_transactions()) { - /* Clear the receive queue, to start with a clean slate. - * Parts of failed transactions or spurious bytes could still be in it. */ - usart_clear(); - } - split_shared_memory_unlock(); - } -} - -/** - * @brief Slave specific initializations. - */ -void soft_serial_target_init(void) { +void serial_transport_driver_slave_init(void) { usart_slave_init(&serial_driver); - - sdStart(serial_driver, &serial_config); - - /* Start transport thread. */ - chThdCreateStatic(waSlaveThread, sizeof(waSlaveThread), HIGHPRIO, SlaveThread, NULL); + usart_driver_start(); } -/** - * @brief React to transactions started by the master. - */ -static inline bool react_to_transactions(void) { - /* Wait until there is a transaction for us. */ - uint8_t sstd_index = (uint8_t)sdGet(serial_driver); - - /* Sanity check that we are actually responding to a valid transaction. */ - if (sstd_index >= NUM_TOTAL_TRANSACTIONS) { - return false; - } - - split_shared_memory_lock(); - split_transaction_desc_t* trans = &split_transaction_table[sstd_index]; - - /* Send back the handshake which is XORed as a simple checksum, - to signal that the slave is ready to receive possible transaction buffers */ - sstd_index ^= HANDSHAKE_MAGIC; - if (!send(&sstd_index, sizeof(sstd_index))) { - return false; - } - - /* Receive transaction buffer from the master. If this transaction requires it.*/ - if (trans->initiator2target_buffer_size) { - if (!receive(split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size)) { - return false; - } - } - - /* Allow any slave processing to occur. */ - if (trans->slave_callback) { - trans->slave_callback(trans->initiator2target_buffer_size, split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size, split_trans_target2initiator_buffer(trans)); - } - - /* Send transaction buffer to the master. If this transaction requires it. */ - if (trans->target2initiator_buffer_size) { - if (!send(split_trans_target2initiator_buffer(trans), trans->target2initiator_buffer_size)) { - return false; - } - } - - return true; -} - -/** - * @brief Master specific initializations. - */ -void soft_serial_initiator_init(void) { +void serial_transport_driver_master_init(void) { usart_master_init(&serial_driver); #if defined(MCU_STM32) && defined(SERIAL_USART_PIN_SWAP) serial_config.cr2 |= USART_CR2_SWAP; // master has swapped TX/RX pins #endif - sdStart(serial_driver, &serial_config); -} - -/** - * @brief Start transaction from the master half to the slave half. - * - * @param index Transaction Table index of the transaction to start. - * @return bool Indicates success of transaction. - */ -bool soft_serial_transaction(int index) { - /* Clear the receive queue, to start with a clean slate. - * Parts of failed transactions or spurious bytes could still be in it. */ - usart_clear(); - - split_shared_memory_lock(); - bool result = initiate_transaction((uint8_t)index); - split_shared_memory_unlock(); - - return result; -} - -/** - * @brief Initiate transaction to slave half. - */ -static inline bool initiate_transaction(uint8_t sstd_index) { - /* Sanity check that we are actually starting a valid transaction. */ - if (sstd_index >= NUM_TOTAL_TRANSACTIONS) { - dprintln("USART: Illegal transaction Id."); - return false; - } - - split_transaction_desc_t* trans = &split_transaction_table[sstd_index]; - - /* Send transaction table index to the slave, which doubles as basic handshake token. */ - if (!send(&sstd_index, sizeof(sstd_index))) { - dprintln("USART: Send Handshake failed."); - return false; - } - - uint8_t sstd_index_shake = 0xFF; - - /* Which we always read back first so that we can error out correctly. - * - due to the half duplex limitations on return codes, we always have to read *something*. - * - without the read, write only transactions *always* succeed, even during the boot process where the slave is not ready. - */ - if (!receive(&sstd_index_shake, sizeof(sstd_index_shake)) || (sstd_index_shake != (sstd_index ^ HANDSHAKE_MAGIC))) { - dprintln("USART: Handshake failed."); - return false; - } - - /* Send transaction buffer to the slave. If this transaction requires it. */ - if (trans->initiator2target_buffer_size) { - if (!send(split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size)) { - dprintln("USART: Send failed."); - return false; - } - } - - /* Receive transaction buffer from the slave. If this transaction requires it. */ - if (trans->target2initiator_buffer_size) { - if (!receive(split_trans_target2initiator_buffer(trans), trans->target2initiator_buffer_size)) { - dprintln("USART: Receive failed."); - return false; - } - } - - return true; + usart_driver_start(); } diff --git a/platforms/chibios/drivers/serial_usart.h b/platforms/chibios/drivers/serial_usart.h index 81fe9e0113..fa062cd736 100644 --- a/platforms/chibios/drivers/serial_usart.h +++ b/platforms/chibios/drivers/serial_usart.h @@ -1,42 +1,12 @@ -/* Copyright 2021 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ +// Copyright 2021 QMK +// SPDX-License-Identifier: GPL-2.0-or-later #pragma once #include "quantum.h" #include "serial.h" -#include "printf.h" - -#include <ch.h> #include <hal.h> -#if !defined(SERIAL_USART_DRIVER) -# define SERIAL_USART_DRIVER SD1 -#endif - -#if !defined(USE_GPIOV1) -/* The default PAL alternate modes are used to signal that the pins are used for USART. */ -# if !defined(SERIAL_USART_TX_PAL_MODE) -# define SERIAL_USART_TX_PAL_MODE 7 -# endif -# if !defined(SERIAL_USART_RX_PAL_MODE) -# define SERIAL_USART_RX_PAL_MODE 7 -# endif -#endif - #if defined(SOFT_SERIAL_PIN) # define SERIAL_USART_TX_PIN SOFT_SERIAL_PIN #endif @@ -49,6 +19,62 @@ # define SERIAL_USART_RX_PIN A10 #endif +#if !defined(SELECT_SOFT_SERIAL_SPEED) +# define SELECT_SOFT_SERIAL_SPEED 1 +#endif + +#if defined(SERIAL_USART_SPEED) +// Allow advanced users to directly set SERIAL_USART_SPEED +#elif SELECT_SOFT_SERIAL_SPEED == 0 +# define SERIAL_USART_SPEED 460800 +#elif SELECT_SOFT_SERIAL_SPEED == 1 +# define SERIAL_USART_SPEED 230400 +#elif SELECT_SOFT_SERIAL_SPEED == 2 +# define SERIAL_USART_SPEED 115200 +#elif SELECT_SOFT_SERIAL_SPEED == 3 +# define SERIAL_USART_SPEED 57600 +#elif SELECT_SOFT_SERIAL_SPEED == 4 +# define SERIAL_USART_SPEED 38400 +#elif SELECT_SOFT_SERIAL_SPEED == 5 +# define SERIAL_USART_SPEED 19200 +#else +# error invalid SELECT_SOFT_SERIAL_SPEED value +#endif + +#if !defined(SERIAL_USART_TIMEOUT) +# define SERIAL_USART_TIMEOUT 20 +#endif + +#if HAL_USE_SERIAL + +typedef SerialDriver QMKSerialDriver; +typedef SerialConfig QMKSerialConfig; + +# if !defined(SERIAL_USART_DRIVER) +# define SERIAL_USART_DRIVER SD1 +# endif + +#elif HAL_USE_SIO + +typedef SIODriver QMKSerialDriver; +typedef SIOConfig QMKSerialConfig; + +# if !defined(SERIAL_USART_DRIVER) +# define SERIAL_USART_DRIVER SIOD1 +# endif + +#endif + +#if !defined(USE_GPIOV1) +/* The default PAL alternate modes are used to signal that the pins are used for USART. */ +# if !defined(SERIAL_USART_TX_PAL_MODE) +# define SERIAL_USART_TX_PAL_MODE 7 +# endif +# if !defined(SERIAL_USART_RX_PAL_MODE) +# define SERIAL_USART_RX_PAL_MODE 7 +# endif +#endif + #if !defined(USART_CR1_M0) # define USART_CR1_M0 USART_CR1_M // some platforms (f1xx) dont have this so #endif @@ -86,31 +112,3 @@ (AFIO->MAPR |= AFIO_MAPR_USART3_REMAP_FULLREMAP); \ } while (0) #endif - -#if !defined(SELECT_SOFT_SERIAL_SPEED) -# define SELECT_SOFT_SERIAL_SPEED 1 -#endif - -#if defined(SERIAL_USART_SPEED) -// Allow advanced users to directly set SERIAL_USART_SPEED -#elif SELECT_SOFT_SERIAL_SPEED == 0 -# define SERIAL_USART_SPEED 460800 -#elif SELECT_SOFT_SERIAL_SPEED == 1 -# define SERIAL_USART_SPEED 230400 -#elif SELECT_SOFT_SERIAL_SPEED == 2 -# define SERIAL_USART_SPEED 115200 -#elif SELECT_SOFT_SERIAL_SPEED == 3 -# define SERIAL_USART_SPEED 57600 -#elif SELECT_SOFT_SERIAL_SPEED == 4 -# define SERIAL_USART_SPEED 38400 -#elif SELECT_SOFT_SERIAL_SPEED == 5 -# define SERIAL_USART_SPEED 19200 -#else -# error invalid SELECT_SOFT_SERIAL_SPEED value -#endif - -#if !defined(SERIAL_USART_TIMEOUT) -# define SERIAL_USART_TIMEOUT 20 -#endif - -#define HANDSHAKE_MAGIC 7 diff --git a/platforms/chibios/drivers/spi_master.c b/platforms/chibios/drivers/spi_master.c index ce69e7f0ac..c3ab0623f0 100644 --- a/platforms/chibios/drivers/spi_master.c +++ b/platforms/chibios/drivers/spi_master.c @@ -20,7 +20,7 @@ static pin_t currentSlavePin = NO_PIN; -#if defined(K20x) || defined(KL2x) +#if defined(K20x) || defined(KL2x) || defined(RP2040) static SPIConfig spiConfig = {NULL, 0, 0, 0}; #else static SPIConfig spiConfig = {false, NULL, 0, 0, 0, 0}; @@ -42,10 +42,12 @@ __attribute__((weak)) void spi_init(void) { palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), SPI_MOSI_PAL_MODE); palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), SPI_MISO_PAL_MODE); #else - palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_ALTERNATE(SPI_SCK_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); - palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_ALTERNATE(SPI_MOSI_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); - palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_ALTERNATE(SPI_MISO_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); + palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), SPI_SCK_FLAGS); + palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), SPI_MOSI_FLAGS); + palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), SPI_MISO_FLAGS); #endif + spiStop(&SPI_DRIVER); + currentSlavePin = NO_PIN; } } @@ -167,7 +169,36 @@ bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) { spiConfig.SPI_CPOL = SPI_CPOL_High; break; } +#elif defined(MCU_RP) + if (lsbFirst) { + osalDbgAssert(lsbFirst == false, "RP2040s PrimeCell SPI implementation does not support sending LSB first."); + } + + // Motorola frame format and 8bit transfer data size. + spiConfig.SSPCR0 = SPI_SSPCR0_FRF_MOTOROLA | SPI_SSPCR0_DSS_8BIT; + // Serial output clock = (ck_sys or ck_peri) / (SSPCPSR->CPSDVSR * (1 + + // SSPCR0->SCR)). SCR is always set to zero, as QMK SPI API expects the + // passed divisor to be the only value to divide the input clock by. + spiConfig.SSPCPSR = roundedDivisor; // Even number from 2 to 254 + switch (mode) { + case 0: + spiConfig.SSPCR0 &= ~SPI_SSPCR0_SPO; // Clock polarity: low + spiConfig.SSPCR0 &= ~SPI_SSPCR0_SPH; // Clock phase: sample on first edge + break; + case 1: + spiConfig.SSPCR0 &= ~SPI_SSPCR0_SPO; // Clock polarity: low + spiConfig.SSPCR0 |= SPI_SSPCR0_SPH; // Clock phase: sample on second edge transition + break; + case 2: + spiConfig.SSPCR0 |= SPI_SSPCR0_SPO; // Clock polarity: high + spiConfig.SSPCR0 &= ~SPI_SSPCR0_SPH; // Clock phase: sample on first edge + break; + case 3: + spiConfig.SSPCR0 |= SPI_SSPCR0_SPO; // Clock polarity: high + spiConfig.SSPCR0 |= SPI_SSPCR0_SPH; // Clock phase: sample on second edge transition + break; + } #else spiConfig.cr1 = 0; diff --git a/platforms/chibios/drivers/vendor/RP/RP2040/serial_vendor.c b/platforms/chibios/drivers/vendor/RP/RP2040/serial_vendor.c new file mode 100644 index 0000000000..764764b3f9 --- /dev/null +++ b/platforms/chibios/drivers/vendor/RP/RP2040/serial_vendor.c @@ -0,0 +1,473 @@ +// Copyright 2022 Stefan Kerkmann +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "quantum.h" +#include "serial_usart.h" +#include "serial_protocol.h" +#include "hardware/pio.h" +#include "hardware/clocks.h" + +#if !defined(MCU_RP) +# error PIO Driver is only available for Raspberry Pi 2040 MCUs! +#endif + +static inline bool receive_impl(uint8_t* destination, const size_t size, sysinterval_t timeout); +static inline bool send_impl(const uint8_t* source, const size_t size); +static inline void pio_serve_interrupt(void); + +#define MSG_PIO_ERROR ((msg_t)(-3)) + +#if defined(SERIAL_PIO_USE_PIO1) +static const PIO pio = pio1; + +OSAL_IRQ_HANDLER(RP_PIO1_IRQ_0_HANDLER) { + OSAL_IRQ_PROLOGUE(); + pio_serve_interrupt(); + OSAL_IRQ_EPILOGUE(); +} +#else +static const PIO pio = pio0; + +OSAL_IRQ_HANDLER(RP_PIO0_IRQ_0_HANDLER) { + OSAL_IRQ_PROLOGUE(); + pio_serve_interrupt(); + OSAL_IRQ_EPILOGUE(); +} +#endif + +#define UART_TX_WRAP_TARGET 0 +#define UART_TX_WRAP 3 + +// clang-format off +#if defined(SERIAL_USART_FULL_DUPLEX) +static const uint16_t uart_tx_program_instructions[] = { + // .wrap_target + 0x9fa0, // 0: pull block side 1 [7] + 0xf727, // 1: set x, 7 side 0 [7] + 0x6001, // 2: out pins, 1 + 0x0642, // 3: jmp x--, 2 [6] + // .wrap +}; +#else +static const uint16_t uart_tx_program_instructions[] = { + // .wrap_target + 0x9fa0, // 0: pull block side 1 [7] + 0xf727, // 1: set x, 7 side 0 [7] + 0x6081, // 2: out pindirs, 1 + 0x0642, // 3: jmp x--, 2 [6] + // .wrap +}; +#endif +// clang-format on + +static const pio_program_t uart_tx_program = { + .instructions = uart_tx_program_instructions, + .length = 4, + .origin = -1, +}; + +#define UART_RX_WRAP_TARGET 0 +#define UART_RX_WRAP 8 + +// clang-format off +static const uint16_t uart_rx_program_instructions[] = { + // .wrap_target + 0x2020, // 0: wait 0 pin, 0 + 0xea27, // 1: set x, 7 [10] + 0x4001, // 2: in pins, 1 + 0x0642, // 3: jmp x--, 2 [6] + 0x00c8, // 4: jmp pin, 8 + 0xc020, // 5: irq wait 0 + 0x20a0, // 6: wait 1 pin, 0 + 0x0000, // 7: jmp 0 + 0x8020, // 8: push block + // .wrap +}; +// clang-format on + +static const pio_program_t uart_rx_program = { + .instructions = uart_rx_program_instructions, + .length = 9, + .origin = -1, +}; + +thread_reference_t rx_thread = NULL; +static int rx_state_machine = -1; + +thread_reference_t tx_thread = NULL; +static int tx_state_machine = -1; + +void pio_serve_interrupt(void) { + uint32_t irqs = pio->ints0; + + // The RX FIFO is not empty any more, therefore wake any sleeping rx thread + if (irqs & (PIO_IRQ0_INTF_SM0_RXNEMPTY_BITS << rx_state_machine)) { + // Disable rx not empty interrupt + pio_set_irq0_source_enabled(pio, pis_sm0_rx_fifo_not_empty + rx_state_machine, false); + + osalSysLockFromISR(); + osalThreadResumeI(&rx_thread, MSG_OK); + osalSysUnlockFromISR(); + } + + // The TX FIFO is not full any more, therefore wake any sleeping tx thread + if (irqs & (PIO_IRQ0_INTF_SM0_TXNFULL_BITS << tx_state_machine)) { + // Disable tx not full interrupt + pio_set_irq0_source_enabled(pio, pis_sm0_tx_fifo_not_full + tx_state_machine, false); + osalSysLockFromISR(); + osalThreadResumeI(&tx_thread, MSG_OK); + osalSysUnlockFromISR(); + } + + // IRQ 0 is set on framing or break errors by the rx state machine + if (pio_interrupt_get(pio, 0UL)) { + pio_interrupt_clear(pio, 0UL); + + osalSysLockFromISR(); + osalThreadResumeI(&rx_thread, MSG_PIO_ERROR); + osalSysUnlockFromISR(); + } +} + +#if !defined(SERIAL_USART_FULL_DUPLEX) +// The internal pull-ups of the RP2040 are rather weakish with a range of 50k to +// 80k, which in turn do not provide enough current to guarantee fast signal rise +// times with a parasitic capacitance of greater than 100pf. In real world +// applications, like split keyboards which might have vias in the signal path +// or long PCB traces, this prevents a successful communication. The solution +// is to temporarily augment the weak pull ups from the receiving side by +// driving the tx pin high. On the receiving side the lowest possible drive +// strength is chosen because the transmitting side must still be able to drive +// the signal low. With this configuration the rise times are fast enough and +// the generated low level with 360mV will generate a logical zero. +static inline void enter_rx_state(void) { + osalSysLock(); + nvicEnableVector(RP_USBCTRL_IRQ_NUMBER, RP_IRQ_USB0_PRIORITY); + // Wait for the transmitting state machines FIFO to run empty. At this point + // the last byte has been pulled from the transmitting state machines FIFO + // into the output shift register. We have to wait a tiny bit more until + // this byte is transmitted, before we can turn on the receiving state + // machine again. + while (!pio_sm_is_tx_fifo_empty(pio, tx_state_machine)) { + } + // Wait for ~11 bits, 1 start bit + 8 data bits + 1 stop bit + 1 bit + // headroom. + wait_us(1000000U * 11U / SERIAL_USART_SPEED); + // Disable tx state machine to not interfere with our tx pin manipulation + pio_sm_set_enabled(pio, tx_state_machine, false); + gpio_set_drive_strength(SERIAL_USART_TX_PIN, GPIO_DRIVE_STRENGTH_2MA); + pio_sm_set_pins_with_mask(pio, tx_state_machine, 1U << SERIAL_USART_TX_PIN, 1U << SERIAL_USART_TX_PIN); + pio_sm_set_consecutive_pindirs(pio, tx_state_machine, SERIAL_USART_TX_PIN, 1U, false); + pio_sm_set_enabled(pio, rx_state_machine, true); + osalSysUnlock(); +} + +static inline void leave_rx_state(void) { + osalSysLock(); + // We don't want to be interrupted by frequent (1KHz) USB interrupts while + // doing our timing critical sending operation. + nvicDisableVector(RP_USBCTRL_IRQ_NUMBER); + // In Half-duplex operation the tx pin dual-functions as sender and + // receiver. To not receive the data we will send, we disable the receiving + // state machine. + pio_sm_set_enabled(pio, rx_state_machine, false); + pio_sm_set_consecutive_pindirs(pio, tx_state_machine, SERIAL_USART_TX_PIN, 1U, true); + pio_sm_set_pins_with_mask(pio, tx_state_machine, 0U, 1U << SERIAL_USART_TX_PIN); + gpio_set_drive_strength(SERIAL_USART_TX_PIN, GPIO_DRIVE_STRENGTH_12MA); + pio_sm_restart(pio, tx_state_machine); + pio_sm_set_enabled(pio, tx_state_machine, true); + osalSysUnlock(); +} +#else +// All this trickery is gladly not necessary for full-duplex. +static inline void enter_rx_state(void) {} +static inline void leave_rx_state(void) {} +#endif + +/** + * @brief Clear the RX and TX hardware FIFOs of the state machines. + */ +inline void serial_transport_driver_clear(void) { + osalSysLock(); + pio_sm_clear_fifos(pio, rx_state_machine); + pio_sm_clear_fifos(pio, tx_state_machine); + osalSysUnlock(); +} + +static inline msg_t sync_tx(sysinterval_t timeout) { + msg_t msg = MSG_OK; + osalSysLock(); + while (pio_sm_is_tx_fifo_full(pio, tx_state_machine)) { +#if !defined(SERIAL_USART_FULL_DUPLEX) + // Enable USB interrupts again, because we might sleep for a long time + // here and don't want to be disconnected from the host. + nvicEnableVector(RP_USBCTRL_IRQ_NUMBER, RP_IRQ_USB0_PRIORITY); +#endif + pio_set_irq0_source_enabled(pio, pis_sm0_tx_fifo_not_full + tx_state_machine, true); + msg = osalThreadSuspendTimeoutS(&tx_thread, timeout); + if (msg < MSG_OK) { + pio_set_irq0_source_enabled(pio, pis_sm0_tx_fifo_not_full + tx_state_machine, false); + break; + } + } +#if !defined(SERIAL_USART_FULL_DUPLEX) + // Entering timing critical territory again. + nvicDisableVector(RP_USBCTRL_IRQ_NUMBER); +#endif + osalSysUnlock(); + return msg; +} + +static inline bool send_impl(const uint8_t* source, const size_t size) { + size_t send = 0; + msg_t msg; + while (send < size) { + msg = sync_tx(TIME_MS2I(SERIAL_USART_TIMEOUT)); + if (msg < MSG_OK) { + return false; + } + + osalSysLock(); + while (send < size) { + if (pio_sm_is_tx_fifo_full(pio, tx_state_machine)) { + break; + } + if (send >= size) { + break; + } + pio_sm_put(pio, tx_state_machine, (uint32_t)(*source)); + source++; + send++; + } + osalSysUnlock(); + } + + return send == size; +} + +/** + * @brief Blocking send of buffer with timeout. + * + * @return true Send success. + * @return false Send failed. + */ +inline bool serial_transport_send(const uint8_t* source, const size_t size) { + leave_rx_state(); + bool result = send_impl(source, size); + enter_rx_state(); + + return result; +} + +static inline msg_t sync_rx(sysinterval_t timeout) { + msg_t msg = MSG_OK; + osalSysLock(); + while (pio_sm_is_rx_fifo_empty(pio, rx_state_machine)) { + pio_set_irq0_source_enabled(pio, pis_sm0_rx_fifo_not_empty + rx_state_machine, true); + msg = osalThreadSuspendTimeoutS(&rx_thread, timeout); + if (msg < MSG_OK) { + pio_set_irq0_source_enabled(pio, pis_sm0_rx_fifo_not_empty + rx_state_machine, false); + break; + } + } + osalSysUnlock(); + return msg; +} + +static inline bool receive_impl(uint8_t* destination, const size_t size, sysinterval_t timeout) { + size_t read = 0U; + + while (read < size) { + msg_t msg = sync_rx(timeout); + if (msg < MSG_OK) { + return false; + } + osalSysLock(); + while (true) { + if (pio_sm_is_rx_fifo_empty(pio, rx_state_machine)) { + break; + } + if (read >= size) { + break; + } + *destination++ = *((uint8_t*)&pio->rxf[rx_state_machine] + 3U); + read++; + } + osalSysUnlock(); + } + + return read == size; +} + +/** + * @brief Blocking receive of size * bytes with timeout. + * + * @return true Receive success. + * @return false Receive failed, e.g. by timeout. + */ +inline bool serial_transport_receive(uint8_t* destination, const size_t size) { + return receive_impl(destination, size, TIME_MS2I(SERIAL_USART_TIMEOUT)); +} + +/** + * @brief Blocking receive of size * bytes. + * + * @return true Receive success. + * @return false Receive failed. + */ +inline bool serial_transport_receive_blocking(uint8_t* destination, const size_t size) { + return receive_impl(destination, size, TIME_INFINITE); +} + +static inline void pio_tx_init(pin_t tx_pin) { + uint pio_idx = pio_get_index(pio); + uint offset = pio_add_program(pio, &uart_tx_program); + +#if defined(SERIAL_USART_FULL_DUPLEX) + // clang-format off + iomode_t tx_pin_mode = PAL_RP_GPIO_OE | + PAL_RP_PAD_SLEWFAST | + PAL_RP_PAD_DRIVE4 | + (pio_idx == 0 ? PAL_MODE_ALTERNATE_PIO0 : PAL_MODE_ALTERNATE_PIO1); + // clang-format on + pio_sm_set_pins_with_mask(pio, tx_state_machine, 1U << tx_pin, 1U << tx_pin); + pio_sm_set_consecutive_pindirs(pio, tx_state_machine, tx_pin, 1U, true); +#else + // clang-format off + iomode_t tx_pin_mode = PAL_RP_PAD_IE | + PAL_RP_GPIO_OE | + PAL_RP_PAD_SCHMITT | + PAL_RP_PAD_PUE | + PAL_RP_PAD_SLEWFAST | + PAL_RP_PAD_DRIVE12 | + PAL_RP_IOCTRL_OEOVER_DRVINVPERI | + (pio_idx == 0 ? PAL_MODE_ALTERNATE_PIO0 : PAL_MODE_ALTERNATE_PIO1); + // clang-format on + pio_sm_set_pins_with_mask(pio, tx_state_machine, 0U << tx_pin, 1U << tx_pin); + pio_sm_set_consecutive_pindirs(pio, tx_state_machine, tx_pin, 1U, true); +#endif + + palSetLineMode(tx_pin, tx_pin_mode); + + pio_sm_config config = pio_get_default_sm_config(); + sm_config_set_wrap(&config, offset + UART_TX_WRAP_TARGET, offset + UART_TX_WRAP); +#if defined(SERIAL_USART_FULL_DUPLEX) + sm_config_set_sideset(&config, 2, true, false); +#else + sm_config_set_sideset(&config, 2, true, true); +#endif + // OUT shifts to right, no autopull + sm_config_set_out_shift(&config, true, false, 32); + // We are mapping both OUT and side-set to the same pin, because sometimes + // we need to assert user data onto the pin (with OUT) and sometimes + // assert constant values (start/stop bit) + sm_config_set_out_pins(&config, tx_pin, 1); + sm_config_set_sideset_pins(&config, tx_pin); + // We only need TX, so get an 8-deep FIFO! + sm_config_set_fifo_join(&config, PIO_FIFO_JOIN_TX); + // SM transmits 1 bit per 8 execution cycles. + float div = (float)clock_get_hz(clk_sys) / (8 * SERIAL_USART_SPEED); + sm_config_set_clkdiv(&config, div); + pio_sm_init(pio, tx_state_machine, offset, &config); + pio_sm_set_enabled(pio, tx_state_machine, true); +} + +static inline void pio_rx_init(pin_t rx_pin) { + uint offset = pio_add_program(pio, &uart_rx_program); + +#if defined(SERIAL_USART_FULL_DUPLEX) + uint pio_idx = pio_get_index(pio); + pio_sm_set_consecutive_pindirs(pio, rx_state_machine, rx_pin, 1, false); + // clang-format off + iomode_t rx_pin_mode = PAL_RP_PAD_IE | + PAL_RP_PAD_SCHMITT | + PAL_RP_PAD_PUE | + (pio_idx == 0 ? PAL_MODE_ALTERNATE_PIO0 : PAL_MODE_ALTERNATE_PIO1); + // clang-format on + palSetLineMode(rx_pin, rx_pin_mode); +#endif + + pio_sm_config config = pio_get_default_sm_config(); + sm_config_set_wrap(&config, offset + UART_RX_WRAP_TARGET, offset + UART_RX_WRAP); + sm_config_set_in_pins(&config, rx_pin); // for WAIT, IN + sm_config_set_jmp_pin(&config, rx_pin); // for JMP + // Shift to right, autopush disabled + sm_config_set_in_shift(&config, true, false, 32); + // Deeper FIFO as we're not doing any TX + sm_config_set_fifo_join(&config, PIO_FIFO_JOIN_RX); + // SM transmits 1 bit per 8 execution cycles. + float div = (float)clock_get_hz(clk_sys) / (8 * SERIAL_USART_SPEED); + sm_config_set_clkdiv(&config, div); + pio_sm_init(pio, rx_state_machine, offset, &config); + pio_sm_set_enabled(pio, rx_state_machine, true); +} + +static inline void pio_init(pin_t tx_pin, pin_t rx_pin) { + uint pio_idx = pio_get_index(pio); + + /* Get PIOx peripheral out of reset state. */ + hal_lld_peripheral_unreset(pio_idx == 0 ? RESETS_ALLREG_PIO0 : RESETS_ALLREG_PIO1); + + tx_state_machine = pio_claim_unused_sm(pio, true); + if (tx_state_machine < 0) { + dprintln("ERROR: Failed to acquire state machine for serial transmission!"); + return; + } + pio_tx_init(tx_pin); + + rx_state_machine = pio_claim_unused_sm(pio, true); + if (rx_state_machine < 0) { + dprintln("ERROR: Failed to acquire state machine for serial reception!"); + return; + } + pio_rx_init(rx_pin); + + // Enable error flag IRQ source for rx state machine + pio_set_irq0_source_enabled(pio, pis_sm0_rx_fifo_not_empty + rx_state_machine, true); + pio_set_irq0_source_enabled(pio, pis_sm0_tx_fifo_not_full + tx_state_machine, true); + pio_set_irq0_source_enabled(pio, pis_interrupt0, true); + + // Enable PIO specific interrupt vector, as the pio implementation is timing + // critical we use the highest possible priority. +#if defined(SERIAL_PIO_USE_PIO1) + nvicEnableVector(RP_PIO1_IRQ_0_NUMBER, CORTEX_MAX_KERNEL_PRIORITY); +#else + nvicEnableVector(RP_PIO0_IRQ_0_NUMBER, CORTEX_MAX_KERNEL_PRIORITY); +#endif + + enter_rx_state(); +} + +/** + * @brief PIO driver specific initialization function for the master side. + */ +void serial_transport_driver_master_init(void) { +#if defined(SERIAL_USART_FULL_DUPLEX) + pin_t tx_pin = SERIAL_USART_TX_PIN; + pin_t rx_pin = SERIAL_USART_RX_PIN; +#else + pin_t tx_pin = SERIAL_USART_TX_PIN; + pin_t rx_pin = SERIAL_USART_TX_PIN; +#endif + +#if defined(SERIAL_USART_PIN_SWAP) + pio_init(rx_pin, tx_pin); +#else + pio_init(tx_pin, rx_pin); +#endif +} + +/** + * @brief PIO driver specific initialization function for the slave side. + */ +void serial_transport_driver_slave_init(void) { +#if defined(SERIAL_USART_FULL_DUPLEX) + pin_t tx_pin = SERIAL_USART_TX_PIN; + pin_t rx_pin = SERIAL_USART_RX_PIN; +#else + pin_t tx_pin = SERIAL_USART_TX_PIN; + pin_t rx_pin = SERIAL_USART_TX_PIN; +#endif + + pio_init(tx_pin, rx_pin); +} diff --git a/platforms/chibios/drivers/vendor/RP/RP2040/ws2812_vendor.c b/platforms/chibios/drivers/vendor/RP/RP2040/ws2812_vendor.c new file mode 100644 index 0000000000..bc34eded14 --- /dev/null +++ b/platforms/chibios/drivers/vendor/RP/RP2040/ws2812_vendor.c @@ -0,0 +1,189 @@ +// Copyright 2022 Stefan Kerkmann +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "quantum.h" +#include "ws2812.h" +#include "hardware/pio.h" +#include "hardware/clocks.h" + +#if !defined(MCU_RP) +# error PIO Driver is only available for Raspberry Pi 2040 MCUs! +#endif + +#if defined(WS2812_PIO_USE_PIO1) +static const PIO pio = pio1; +#else +static const PIO pio = pio0; +#endif + +#if !defined(RP_DMA_PRIORITY_WS2812) +# define RP_DMA_PRIORITY_WS2812 12 +#endif + +static int state_machine = -1; + +#define WS2812_WRAP_TARGET 0 +#define WS2812_WRAP 3 + +#define WS2812_T1 2 +#define WS2812_T2 5 +#define WS2812_T3 3 + +#if defined(WS2812_EXTERNAL_PULLUP) + +# pragma message "The GPIOs of the RP2040 are NOT 5V tolerant! Make sure to NOT apply any voltage over 3.3V to the RGB data pin." + +// clang-format off +static const uint16_t ws2812_program_instructions[] = { + // .wrap_target + 0x7221, // 0: out x, 1 side 1 [2] + 0x0123, // 1: jmp !x, 3 side 0 [1] + 0x0400, // 2: jmp 0 side 0 [4] + 0xb442, // 3: nop side 1 [4] + // .wrap +}; + +#else + +static const uint16_t ws2812_program_instructions[] = { + // .wrap_target + 0x6221, // 0: out x, 1 side 0 [2] + 0x1123, // 1: jmp !x, 3 side 1 [1] + 0x1400, // 2: jmp 0 side 1 [4] + 0xa442, // 3: nop side 0 [4] + // .wrap +}; +// clang-format on +#endif + +static const pio_program_t ws2812_program = { + .instructions = ws2812_program_instructions, + .length = 4, + .origin = -1, +}; + +static uint32_t WS2812_BUFFER[RGBLED_NUM]; +static const rp_dma_channel_t* WS2812_DMA_CHANNEL; + +bool ws2812_init(void) { + uint pio_idx = pio_get_index(pio); + /* Get PIOx peripheral out of reset state. */ + hal_lld_peripheral_unreset(pio_idx == 0 ? RESETS_ALLREG_PIO0 : RESETS_ALLREG_PIO1); + + // clang-format off + iomode_t rgb_pin_mode = PAL_RP_PAD_SLEWFAST | + PAL_RP_GPIO_OE | + (pio_idx == 0 ? PAL_MODE_ALTERNATE_PIO0 : PAL_MODE_ALTERNATE_PIO1); + // clang-format on + + palSetLineMode(RGB_DI_PIN, rgb_pin_mode); + + state_machine = pio_claim_unused_sm(pio, true); + if (state_machine < 0) { + dprintln("ERROR: Failed to acquire state machine for WS2812 output!"); + return false; + } + + uint offset = pio_add_program(pio, &ws2812_program); + + pio_sm_set_consecutive_pindirs(pio, state_machine, RGB_DI_PIN, 1, true); + + pio_sm_config config = pio_get_default_sm_config(); + sm_config_set_wrap(&config, offset + WS2812_WRAP_TARGET, offset + WS2812_WRAP); + sm_config_set_sideset_pins(&config, RGB_DI_PIN); + sm_config_set_fifo_join(&config, PIO_FIFO_JOIN_TX); + +#if defined(WS2812_EXTERNAL_PULLUP) + /* Instruct side-set to change the pin-directions instead of outputting + * a logic level. We generate our levels the following way: + * + * 1: Set RGB data pin to high impedance input and let the pull-up drive the + * signal high. + * + * 0: Set RGB data pin to low impedance output and drive the pin low. + */ + sm_config_set_sideset(&config, 1, false, true); +#else + sm_config_set_sideset(&config, 1, false, false); +#endif + +#if defined(RGBW) + sm_config_set_out_shift(&config, false, true, 32); +#else + sm_config_set_out_shift(&config, false, true, 24); +#endif + + int cycles_per_bit = WS2812_T1 + WS2812_T2 + WS2812_T3; + float div = clock_get_hz(clk_sys) / (800.0f * KHZ * cycles_per_bit); + sm_config_set_clkdiv(&config, div); + + pio_sm_init(pio, state_machine, offset, &config); + pio_sm_set_enabled(pio, state_machine, true); + + WS2812_DMA_CHANNEL = dmaChannelAlloc(RP_DMA_CHANNEL_ID_ANY, RP_DMA_PRIORITY_WS2812, NULL, NULL); + + // clang-format off + uint32_t mode = DMA_CTRL_TRIG_INCR_READ | + DMA_CTRL_TRIG_DATA_SIZE_WORD | + DMA_CTRL_TRIG_IRQ_QUIET | + DMA_CTRL_TRIG_TREQ_SEL(pio_idx == 0 ? state_machine : state_machine + 8); + // clang-format on + + dmaChannelSetModeX(WS2812_DMA_CHANNEL, mode); + dmaChannelSetDestinationX(WS2812_DMA_CHANNEL, (uint32_t)&pio->txf[state_machine]); + return true; +} + +/** + * @brief Convert RGBW value into WS2812 compatible 32-bit data word. + */ +__always_inline static uint32_t rgbw8888_to_u32(uint8_t red, uint8_t green, uint8_t blue, uint8_t white) { +#if (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_GRB) + return ((uint32_t)green << 24) | ((uint32_t)red << 16) | ((uint32_t)blue << 8) | ((uint32_t)white); +#elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_RGB) + return ((uint32_t)red << 24) | ((uint32_t)green << 16) | ((uint32_t)blue << 8) | ((uint32_t)white); +#elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_BGR) + return ((uint32_t)blue << 24) | ((uint32_t)green << 16) | ((uint32_t)red << 8) | ((uint32_t)white); +#endif +} + +static inline void sync_ws2812_transfer(void) { + if (unlikely(dmaChannelIsBusyX(WS2812_DMA_CHANNEL) || !pio_sm_is_tx_fifo_empty(pio, state_machine))) { + fast_timer_t start = timer_read_fast(); + do { + // Abort the synchronization if we have to wait longer than the total + // count of LEDs in millisecounds. This is safely much longer than it + // would take to push all the data out. + if (unlikely(timer_elapsed_fast(start) > RGBLED_NUM)) { + dprintln("ERROR: WS2812 DMA transfer has stalled, aborting!"); + dmaChannelDisableX(WS2812_DMA_CHANNEL); + return; + } + + } while (dmaChannelIsBusyX(WS2812_DMA_CHANNEL) || !pio_sm_is_tx_fifo_empty(pio, state_machine)); + // We wait for the WS2812 chain to reset after all data has been pushed + // out. + wait_us(WS2812_TRST_US); + } +} + +void ws2812_setleds(LED_TYPE* ledarray, uint16_t leds) { + static bool is_initialized = false; + if (unlikely(!is_initialized)) { + is_initialized = ws2812_init(); + } + + sync_ws2812_transfer(); + + for (int i = 0; i < leds; i++) { +#if defined(RGBW) + WS2812_BUFFER[i] = rgbw8888_to_u32(ledarray[i].r, ledarray[i].g, ledarray[i].b, ledarray[i].w); +#else + WS2812_BUFFER[i] = rgbw8888_to_u32(ledarray[i].r, ledarray[i].g, ledarray[i].b, 0); +#endif + } + + dmaChannelSetSourceX(WS2812_DMA_CHANNEL, (uint32_t)WS2812_BUFFER); + dmaChannelSetCounterX(WS2812_DMA_CHANNEL, leds); + dmaChannelEnableX(WS2812_DMA_CHANNEL); +} diff --git a/platforms/chibios/drivers/wear_leveling/wear_leveling_efl.c b/platforms/chibios/drivers/wear_leveling/wear_leveling_efl.c new file mode 100644 index 0000000000..cdd1e26a7d --- /dev/null +++ b/platforms/chibios/drivers/wear_leveling/wear_leveling_efl.c @@ -0,0 +1,143 @@ +// Copyright 2022 Nick Brassel (@tzarc) +// SPDX-License-Identifier: GPL-2.0-or-later +#include <stdbool.h> +#include <hal.h> +#include "timer.h" +#include "wear_leveling.h" +#include "wear_leveling_internal.h" + +static flash_offset_t base_offset = UINT32_MAX; + +#if defined(WEAR_LEVELING_EFL_FIRST_SECTOR) +static flash_sector_t first_sector = WEAR_LEVELING_EFL_FIRST_SECTOR; +#else // defined(WEAR_LEVELING_EFL_FIRST_SECTOR) +static flash_sector_t first_sector = UINT16_MAX; +#endif // defined(WEAR_LEVELING_EFL_FIRST_SECTOR) + +static flash_sector_t sector_count = UINT16_MAX; +static BaseFlash * flash; + +#ifndef WEAR_LEVELING_EFL_FIRST_SECTOR +// "Automatic" detection of the flash size -- ideally ChibiOS would have this already, but alas, it doesn't. +static inline uint32_t detect_flash_size(void) { +# if defined(WEAR_LEVELING_EFL_FLASH_SIZE) + return WEAR_LEVELING_EFL_FLASH_SIZE; +# elif defined(FLASH_BANK_SIZE) + return FLASH_BANK_SIZE; +# elif defined(FLASH_SIZE) + return FLASH_SIZE; +# elif defined(FLASHSIZE_BASE) +# if defined(QMK_MCU_SERIES_STM32F0XX) || defined(QMK_MCU_SERIES_STM32F1XX) || defined(QMK_MCU_SERIES_STM32F3XX) || defined(QMK_MCU_SERIES_STM32F4XX) || defined(QMK_MCU_SERIES_STM32G4XX) || defined(QMK_MCU_SERIES_STM32L0XX) || defined(QMK_MCU_SERIES_STM32L4XX) || defined(QMK_MCU_SERIES_GD32VF103) + return ((*(uint32_t *)FLASHSIZE_BASE) & 0xFFFFU) << 10U; // this register has the flash size in kB, so we convert it to bytes +# elif defined(QMK_MCU_SERIES_STM32L1XX) +# error This MCU family has an uncommon flash size register definition and has not been implemented. Perhaps try using the true EEPROM on the MCU instead? +# endif +# else +# error Unknown flash size definition. + return 0; +# endif +} +#endif // WEAR_LEVELING_EFL_FIRST_SECTOR + +bool backing_store_init(void) { + bs_dprintf("Init\n"); + flash = (BaseFlash *)&EFLD1; + + // Need to re-lock the EFL, as if we've just had the bootloader executing it'll already be unlocked. + backing_store_lock(); + + const flash_descriptor_t *desc = flashGetDescriptor(flash); + uint32_t counter = 0; + +#if defined(WEAR_LEVELING_EFL_FIRST_SECTOR) + + // Work out how many sectors we want to use, working forwards from the first sector specified + for (flash_sector_t i = 0; i < desc->sectors_count - first_sector; ++i) { + counter += flashGetSectorSize(flash, first_sector + i); + if (counter >= (WEAR_LEVELING_BACKING_SIZE)) { + sector_count = i + 1; + base_offset = flashGetSectorOffset(flash, first_sector); + break; + } + } + if (sector_count == UINT16_MAX || base_offset >= flash_size) { + // We didn't get the required number of sectors. Can't do anything here. Fault. + chSysHalt("Invalid sector count intended to be used with wear_leveling"); + } + +#else // defined(WEAR_LEVELING_EFL_FIRST_SECTOR) + + // Work out how many sectors we want to use, working backwards from the end of the flash + uint32_t flash_size = detect_flash_size(); + flash_sector_t last_sector = desc->sectors_count; + for (flash_sector_t i = 0; i < desc->sectors_count; ++i) { + first_sector = desc->sectors_count - i - 1; + if (flashGetSectorOffset(flash, first_sector) >= flash_size) { + last_sector = first_sector; + continue; + } + counter += flashGetSectorSize(flash, first_sector); + if (counter >= (WEAR_LEVELING_BACKING_SIZE)) { + sector_count = last_sector - first_sector; + base_offset = flashGetSectorOffset(flash, first_sector); + break; + } + } + +#endif // defined(WEAR_LEVELING_EFL_FIRST_SECTOR) + + return true; +} + +bool backing_store_unlock(void) { + bs_dprintf("Unlock\n"); + return eflStart(&EFLD1, NULL) == HAL_RET_SUCCESS; +} + +bool backing_store_erase(void) { +#ifdef WEAR_LEVELING_DEBUG_OUTPUT + uint32_t start = timer_read32(); +#endif + + bool ret = true; + flash_error_t status; + for (int i = 0; i < sector_count; ++i) { + // Kick off the sector erase + status = flashStartEraseSector(flash, first_sector + i); + if (status != FLASH_NO_ERROR && status != FLASH_BUSY_ERASING) { + ret = false; + } + + // Wait for the erase to complete + status = flashWaitErase(flash); + if (status != FLASH_NO_ERROR && status != FLASH_BUSY_ERASING) { + ret = false; + } + } + + bs_dprintf("Backing store erase took %ldms to complete\n", ((long)(timer_read32() - start))); + return ret; +} + +bool backing_store_write(uint32_t address, backing_store_int_t value) { + uint32_t offset = (base_offset + address); + bs_dprintf("Write "); + wl_dump(offset, &value, sizeof(value)); + value = ~value; + return flashProgram(flash, offset, sizeof(value), (const uint8_t *)&value) == FLASH_NO_ERROR; +} + +bool backing_store_lock(void) { + bs_dprintf("Lock \n"); + eflStop(&EFLD1); + return true; +} + +bool backing_store_read(uint32_t address, backing_store_int_t *value) { + uint32_t offset = (base_offset + address); + backing_store_int_t *loc = (backing_store_int_t *)flashGetOffsetAddress(flash, offset); + *value = ~(*loc); + bs_dprintf("Read "); + wl_dump(offset, value, sizeof(backing_store_int_t)); + return true; +} diff --git a/platforms/chibios/drivers/wear_leveling/wear_leveling_efl_config.h b/platforms/chibios/drivers/wear_leveling/wear_leveling_efl_config.h new file mode 100644 index 0000000000..9e38c2965d --- /dev/null +++ b/platforms/chibios/drivers/wear_leveling/wear_leveling_efl_config.h @@ -0,0 +1,50 @@ +// Copyright 2022 Nick Brassel (@tzarc) +// SPDX-License-Identifier: GPL-2.0-or-later +#pragma once + +#ifndef __ASSEMBLER__ +# include <hal.h> +#endif + +// Work out how many bytes per write to internal flash +#ifndef BACKING_STORE_WRITE_SIZE +// These need to match EFL's XXXXXX_FLASH_LINE_SIZE, see associated code in `lib/chibios/os/hal/ports/**/hal_efl_lld.c`, +// or associated `stm32_registry.h` for the MCU in question (or equivalent for the family). +# if defined(QMK_MCU_SERIES_GD32VF103) +# define BACKING_STORE_WRITE_SIZE 2 // from hal_efl_lld.c +# elif defined(QMK_MCU_FAMILY_NUC123) +# define BACKING_STORE_WRITE_SIZE 4 // from hal_efl_lld.c +# elif defined(QMK_MCU_FAMILY_STM32) +# if defined(STM32_FLASH_LINE_SIZE) // from some family's stm32_registry.h file +# define BACKING_STORE_WRITE_SIZE (STM32_FLASH_LINE_SIZE) +# else +# if defined(QMK_MCU_SERIES_STM32F1XX) +# define BACKING_STORE_WRITE_SIZE 2 // from hal_efl_lld.c +# elif defined(QMK_MCU_SERIES_STM32F3XX) +# define BACKING_STORE_WRITE_SIZE 2 // from hal_efl_lld.c +# elif defined(QMK_MCU_SERIES_STM32F4XX) +# define BACKING_STORE_WRITE_SIZE (1 << STM32_FLASH_PSIZE) // from hal_efl_lld.c +# elif defined(QMK_MCU_SERIES_STM32L4XX) +# define BACKING_STORE_WRITE_SIZE 8 // from hal_efl_lld.c +# elif defined(QMK_MCU_SERIES_STM32G0XX) +# define BACKING_STORE_WRITE_SIZE 8 // from hal_efl_lld.c +# elif defined(QMK_MCU_SERIES_STM32G4XX) +# define BACKING_STORE_WRITE_SIZE 8 // from hal_efl_lld.c +# else +# error "ChibiOS hasn't defined STM32_FLASH_LINE_SIZE, and could not automatically determine BACKING_STORE_WRITE_SIZE" // normally defined in stm32_registry.h, should be set by STM32_FLASH_LINE_SIZE +# endif +# endif +# else +# error "Could not automatically determine BACKING_STORE_WRITE_SIZE" +# endif +#endif + +// 2kB backing space allocated +#ifndef WEAR_LEVELING_BACKING_SIZE +# define WEAR_LEVELING_BACKING_SIZE 2048 +#endif // WEAR_LEVELING_BACKING_SIZE + +// 1kB logical EEPROM +#ifndef WEAR_LEVELING_LOGICAL_SIZE +# define WEAR_LEVELING_LOGICAL_SIZE 1024 +#endif // WEAR_LEVELING_LOGICAL_SIZE diff --git a/platforms/chibios/drivers/wear_leveling/wear_leveling_legacy.c b/platforms/chibios/drivers/wear_leveling/wear_leveling_legacy.c new file mode 100644 index 0000000000..87126c4467 --- /dev/null +++ b/platforms/chibios/drivers/wear_leveling/wear_leveling_legacy.c @@ -0,0 +1,59 @@ +// Copyright 2022 Nick Brassel (@tzarc) +// SPDX-License-Identifier: GPL-2.0-or-later +#include <stdbool.h> +#include <hal.h> +#include "timer.h" +#include "wear_leveling.h" +#include "wear_leveling_internal.h" +#include "flash_stm32.h" + +bool backing_store_init(void) { + bs_dprintf("Init\n"); + return true; +} + +bool backing_store_unlock(void) { + bs_dprintf("Unlock\n"); + FLASH_Unlock(); + return true; +} + +bool backing_store_erase(void) { +#ifdef WEAR_LEVELING_DEBUG_OUTPUT + uint32_t start = timer_read32(); +#endif + + bool ret = true; + FLASH_Status status; + for (int i = 0; i < (WEAR_LEVELING_LEGACY_EMULATION_PAGE_COUNT); ++i) { + status = FLASH_ErasePage(WEAR_LEVELING_LEGACY_EMULATION_BASE_PAGE_ADDRESS + (i * (WEAR_LEVELING_LEGACY_EMULATION_PAGE_SIZE))); + if (status != FLASH_COMPLETE) { + ret = false; + } + } + + bs_dprintf("Backing store erase took %ldms to complete\n", ((long)(timer_read32() - start))); + return ret; +} + +bool backing_store_write(uint32_t address, backing_store_int_t value) { + uint32_t offset = ((WEAR_LEVELING_LEGACY_EMULATION_BASE_PAGE_ADDRESS) + address); + bs_dprintf("Write "); + wl_dump(offset, &value, sizeof(backing_store_int_t)); + return FLASH_ProgramHalfWord(offset, ~value) == FLASH_COMPLETE; +} + +bool backing_store_lock(void) { + bs_dprintf("Lock \n"); + FLASH_Lock(); + return true; +} + +bool backing_store_read(uint32_t address, backing_store_int_t* value) { + uint32_t offset = ((WEAR_LEVELING_LEGACY_EMULATION_BASE_PAGE_ADDRESS) + address); + backing_store_int_t* loc = (backing_store_int_t*)offset; + *value = ~(*loc); + bs_dprintf("Read "); + wl_dump(offset, loc, sizeof(backing_store_int_t)); + return true; +} diff --git a/platforms/chibios/drivers/wear_leveling/wear_leveling_legacy_config.h b/platforms/chibios/drivers/wear_leveling/wear_leveling_legacy_config.h new file mode 100644 index 0000000000..1e4691a6c0 --- /dev/null +++ b/platforms/chibios/drivers/wear_leveling/wear_leveling_legacy_config.h @@ -0,0 +1,67 @@ +// Copyright 2022 Nick Brassel (@tzarc) +// SPDX-License-Identifier: GPL-2.0-or-later +#pragma once + +// Work out the page size to use +#ifndef WEAR_LEVELING_LEGACY_EMULATION_PAGE_SIZE +# if defined(QMK_MCU_STM32F042) +# define WEAR_LEVELING_LEGACY_EMULATION_PAGE_SIZE 1024 +# elif defined(QMK_MCU_STM32F070) || defined(QMK_MCU_STM32F072) +# define WEAR_LEVELING_LEGACY_EMULATION_PAGE_SIZE 2048 +# elif defined(QMK_MCU_STM32F401) || defined(QMK_MCU_STM32F411) +# define WEAR_LEVELING_LEGACY_EMULATION_PAGE_SIZE 16384 +# endif +#endif + +// Work out how much flash space we have +#ifndef WEAR_LEVELING_LEGACY_EMULATION_FLASH_SIZE +# define WEAR_LEVELING_LEGACY_EMULATION_FLASH_SIZE ((*(uint32_t *)FLASHSIZE_BASE) & 0xFFFFU) // in kB +#endif + +// The base location of program memory +#ifndef WEAR_LEVELING_LEGACY_EMULATION_FLASH_BASE +# define WEAR_LEVELING_LEGACY_EMULATION_FLASH_BASE 0x08000000 +#endif + +// The number of pages to use +#ifndef WEAR_LEVELING_LEGACY_EMULATION_PAGE_COUNT +# if defined(QMK_MCU_STM32F042) +# define WEAR_LEVELING_LEGACY_EMULATION_PAGE_COUNT 2 +# elif defined(QMK_MCU_STM32F070) || defined(QMK_MCU_STM32F072) +# define WEAR_LEVELING_LEGACY_EMULATION_PAGE_COUNT 1 +# elif defined(QMK_MCU_STM32F401) || defined(QMK_MCU_STM32F411) +# define WEAR_LEVELING_LEGACY_EMULATION_PAGE_COUNT 1 +# endif +#endif + +// The origin of the emulated eeprom +#ifndef WEAR_LEVELING_LEGACY_EMULATION_BASE_PAGE_ADDRESS +# if defined(QMK_MCU_STM32F042) || defined(QMK_MCU_STM32F070) || defined(QMK_MCU_STM32F072) +# define WEAR_LEVELING_LEGACY_EMULATION_BASE_PAGE_ADDRESS ((uintptr_t)(WEAR_LEVELING_LEGACY_EMULATION_FLASH_BASE) + WEAR_LEVELING_LEGACY_EMULATION_FLASH_SIZE * 1024 - (WEAR_LEVELING_LEGACY_EMULATION_PAGE_COUNT * WEAR_LEVELING_LEGACY_EMULATION_PAGE_SIZE)) +# elif defined(QMK_MCU_STM32F401) || defined(QMK_MCU_STM32F411) +# if defined(BOOTLOADER_STM32) +# define WEAR_LEVELING_LEGACY_EMULATION_BASE_PAGE_ADDRESS (WEAR_LEVELING_LEGACY_EMULATION_FLASH_BASE + (1 * (WEAR_LEVELING_LEGACY_EMULATION_PAGE_SIZE))) // +16k +# elif defined(BOOTLOADER_TINYUF2) +# define WEAR_LEVELING_LEGACY_EMULATION_BASE_PAGE_ADDRESS (WEAR_LEVELING_LEGACY_EMULATION_FLASH_BASE + (3 * (WEAR_LEVELING_LEGACY_EMULATION_PAGE_SIZE))) // +48k +# endif +# endif +#endif + +// 2-byte writes +#ifndef BACKING_STORE_WRITE_SIZE +# define BACKING_STORE_WRITE_SIZE 2 +#endif + +// The amount of space to use for the entire set of emulation +#ifndef WEAR_LEVELING_BACKING_SIZE +# if defined(QMK_MCU_STM32F042) || defined(QMK_MCU_STM32F070) || defined(QMK_MCU_STM32F072) +# define WEAR_LEVELING_BACKING_SIZE 2048 +# elif defined(QMK_MCU_STM32F401) || defined(QMK_MCU_STM32F411) +# define WEAR_LEVELING_BACKING_SIZE 16384 +# endif +#endif + +// The logical amount of eeprom available +#ifndef WEAR_LEVELING_LOGICAL_SIZE +# define WEAR_LEVELING_LOGICAL_SIZE 1024 +#endif diff --git a/platforms/chibios/drivers/wear_leveling/wear_leveling_rp2040_flash.c b/platforms/chibios/drivers/wear_leveling/wear_leveling_rp2040_flash.c new file mode 100644 index 0000000000..640628e1e9 --- /dev/null +++ b/platforms/chibios/drivers/wear_leveling/wear_leveling_rp2040_flash.c @@ -0,0 +1,221 @@ +/** + * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2022 Nick Brassel (@tzarc) + * Copyright (c) 2022 Stefan Kerkmann (@KarlK90) + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "pico/bootrom.h" +#include "hardware/flash.h" +#include "hardware/sync.h" +#include "hardware/structs/ssi.h" +#include "hardware/structs/ioqspi.h" + +#include <stdbool.h> +#include "timer.h" +#include "wear_leveling.h" +#include "wear_leveling_internal.h" + +#ifndef WEAR_LEVELING_RP2040_FLASH_BULK_COUNT +# define WEAR_LEVELING_RP2040_FLASH_BULK_COUNT 64 +#endif // WEAR_LEVELING_RP2040_FLASH_BULK_COUNT + +#define FLASHCMD_PAGE_PROGRAM 0x02 +#define FLASHCMD_READ_STATUS 0x05 +#define FLASHCMD_WRITE_ENABLE 0x06 + +extern uint8_t BOOT2_ROM[256]; +static uint32_t BOOT2_ROM_RAM[64]; + +static ssi_hw_t *const ssi = (ssi_hw_t *)XIP_SSI_BASE; + +// Sanity check +check_hw_layout(ssi_hw_t, ssienr, SSI_SSIENR_OFFSET); +check_hw_layout(ssi_hw_t, spi_ctrlr0, SSI_SPI_CTRLR0_OFFSET); + +static void __no_inline_not_in_flash_func(flash_enable_xip_via_boot2)(void) { + ((void (*)(void))BOOT2_ROM_RAM + 1)(); +} + +// Bitbanging the chip select using IO overrides, in case RAM-resident IRQs +// are still running, and the FIFO bottoms out. (the bootrom does the same) +static void __no_inline_not_in_flash_func(flash_cs_force)(bool high) { + uint32_t field_val = high ? IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_VALUE_HIGH : IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_VALUE_LOW; + hw_write_masked(&ioqspi_hw->io[1].ctrl, field_val << IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_LSB, IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_BITS); +} + +// Also allow any unbounded loops to check whether the above abort condition +// was asserted, and terminate early +static int __no_inline_not_in_flash_func(flash_was_aborted)(void) { + return *(io_rw_32 *)(IO_QSPI_BASE + IO_QSPI_GPIO_QSPI_SD1_CTRL_OFFSET) & IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_BITS; +} + +// Put bytes from one buffer, and get bytes into another buffer. +// These can be the same buffer. +// If tx is NULL then send zeroes. +// If rx is NULL then all read data will be dropped. +// +// If rx_skip is nonzero, this many bytes will first be consumed from the FIFO, +// before reading a further count bytes into *rx. +// E.g. if you have written a command+address just before calling this function. +static void __no_inline_not_in_flash_func(flash_put_get)(const uint8_t *tx, uint8_t *rx, size_t count, size_t rx_skip) { + // Make sure there is never more data in flight than the depth of the RX + // FIFO. Otherwise, when we are interrupted for long periods, hardware + // will overflow the RX FIFO. + const uint max_in_flight = 16 - 2; // account for data internal to SSI + size_t tx_count = count; + size_t rx_count = count; + while (tx_count || rx_skip || rx_count) { + // NB order of reads, for pessimism rather than optimism + uint32_t tx_level = ssi_hw->txflr; + uint32_t rx_level = ssi_hw->rxflr; + bool did_something = false; // Expect this to be folded into control flow, not register + if (tx_count && tx_level + rx_level < max_in_flight) { + ssi->dr0 = (uint32_t)(tx ? *tx++ : 0); + --tx_count; + did_something = true; + } + if (rx_level) { + uint8_t rxbyte = ssi->dr0; + did_something = true; + if (rx_skip) { + --rx_skip; + } else { + if (rx) *rx++ = rxbyte; + --rx_count; + } + } + // APB load costs 4 cycles, so only do it on idle loops (our budget is + // 48 cyc/byte) + if (!did_something && __builtin_expect(flash_was_aborted(), 0)) break; + } + flash_cs_force(1); +} + +// Convenience wrapper for above +// (And it's hard for the debug host to get the tight timing between +// cmd DR0 write and the remaining data) +static void __no_inline_not_in_flash_func(_flash_do_cmd)(uint8_t cmd, const uint8_t *tx, uint8_t *rx, size_t count) { + flash_cs_force(0); + ssi->dr0 = cmd; + flash_put_get(tx, rx, count, 1); +} + +// Timing of this one is critical, so do not expose the symbol to debugger etc +static void __no_inline_not_in_flash_func(flash_put_cmd_addr)(uint8_t cmd, uint32_t addr) { + flash_cs_force(0); + addr |= cmd << 24; + for (int i = 0; i < 4; ++i) { + ssi->dr0 = addr >> 24; + addr <<= 8; + } +} + +// Poll the flash status register until the busy bit (LSB) clears +static void __no_inline_not_in_flash_func(flash_wait_ready)(void) { + uint8_t stat; + do { + _flash_do_cmd(FLASHCMD_READ_STATUS, NULL, &stat, 1); + } while (stat & 0x1 && !flash_was_aborted()); +} + +// Set the WEL bit (needed before any program/erase operation) +static void __no_inline_not_in_flash_func(flash_enable_write)(void) { + _flash_do_cmd(FLASHCMD_WRITE_ENABLE, NULL, NULL, 0); +} + +static void __no_inline_not_in_flash_func(pico_program_bulk)(uint32_t flash_address, backing_store_int_t *values, size_t item_count) { + rom_connect_internal_flash_fn connect_internal_flash = (rom_connect_internal_flash_fn)rom_func_lookup_inline(ROM_FUNC_CONNECT_INTERNAL_FLASH); + rom_flash_exit_xip_fn flash_exit_xip = (rom_flash_exit_xip_fn)rom_func_lookup_inline(ROM_FUNC_FLASH_EXIT_XIP); + rom_flash_flush_cache_fn flash_flush_cache = (rom_flash_flush_cache_fn)rom_func_lookup_inline(ROM_FUNC_FLASH_FLUSH_CACHE); + assert(connect_internal_flash && flash_exit_xip && flash_flush_cache); + + static backing_store_int_t bulk_write_buffer[WEAR_LEVELING_RP2040_FLASH_BULK_COUNT]; + + while (item_count) { + size_t batch_size = MIN(item_count, WEAR_LEVELING_RP2040_FLASH_BULK_COUNT); + for (size_t i = 0; i < batch_size; i++, values++, item_count--) { + bulk_write_buffer[i] = ~(*values); + } + __compiler_memory_barrier(); + + connect_internal_flash(); + flash_exit_xip(); + flash_enable_write(); + + flash_put_cmd_addr(FLASHCMD_PAGE_PROGRAM, flash_address); + flash_put_get((uint8_t *)bulk_write_buffer, NULL, batch_size * sizeof(backing_store_int_t), 4); + flash_wait_ready(); + flash_address += batch_size * sizeof(backing_store_int_t); + + flash_flush_cache(); + flash_enable_xip_via_boot2(); + } +} + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// QMK Wear-Leveling Backing Store implementation + +static int interrupts; + +bool backing_store_init(void) { + bs_dprintf("Init\n"); + memcpy(BOOT2_ROM_RAM, BOOT2_ROM, sizeof(BOOT2_ROM)); + __compiler_memory_barrier(); + return true; +} + +bool backing_store_unlock(void) { + bs_dprintf("Unlock\n"); + return true; +} + +bool backing_store_erase(void) { +#ifdef WEAR_LEVELING_DEBUG_OUTPUT + uint32_t start = timer_read32(); +#endif + + // Ensure the backing size can be cleanly subtracted from the flash size without alignment issues. + _Static_assert((WEAR_LEVELING_BACKING_SIZE) % (FLASH_SECTOR_SIZE) == 0, "Backing size must be a multiple of FLASH_SECTOR_SIZE"); + + interrupts = save_and_disable_interrupts(); + flash_range_erase((WEAR_LEVELING_RP2040_FLASH_BASE), (WEAR_LEVELING_BACKING_SIZE)); + restore_interrupts(interrupts); + + bs_dprintf("Backing store erase took %ldms to complete\n", ((long)(timer_read32() - start))); + return true; +} + +bool backing_store_write(uint32_t address, backing_store_int_t value) { + return backing_store_write_bulk(address, &value, 1); +} + +bool backing_store_write_bulk(uint32_t address, backing_store_int_t *values, size_t item_count) { + uint32_t offset = (WEAR_LEVELING_RP2040_FLASH_BASE) + address; + bs_dprintf("Write "); + wl_dump(offset, values, sizeof(backing_store_int_t) * item_count); + interrupts = save_and_disable_interrupts(); + pico_program_bulk(offset, values, item_count); + restore_interrupts(interrupts); + return true; +} + +bool backing_store_lock(void) { + return true; +} + +bool backing_store_read(uint32_t address, backing_store_int_t *value) { + return backing_store_read_bulk(address, value, 1); +} + +bool backing_store_read_bulk(uint32_t address, backing_store_int_t *values, size_t item_count) { + uint32_t offset = (WEAR_LEVELING_RP2040_FLASH_BASE) + address; + backing_store_int_t *loc = (backing_store_int_t *)((XIP_BASE) + offset); + for (size_t i = 0; i < item_count; ++i) { + values[i] = ~loc[i]; + } + bs_dprintf("Read "); + wl_dump(offset, values, item_count * sizeof(backing_store_int_t)); + return true; +} diff --git a/platforms/chibios/drivers/wear_leveling/wear_leveling_rp2040_flash_config.h b/platforms/chibios/drivers/wear_leveling/wear_leveling_rp2040_flash_config.h new file mode 100644 index 0000000000..93a9aa0372 --- /dev/null +++ b/platforms/chibios/drivers/wear_leveling/wear_leveling_rp2040_flash_config.h @@ -0,0 +1,32 @@ +// Copyright 2022 Nick Brassel (@tzarc) +// SPDX-License-Identifier: GPL-2.0-or-later +#pragma once + +#ifndef __ASSEMBLER__ +# include "hardware/flash.h" +#endif + +// 2-byte writes +#ifndef BACKING_STORE_WRITE_SIZE +# define BACKING_STORE_WRITE_SIZE 2 +#endif + +// 64kB backing space allocated +#ifndef WEAR_LEVELING_BACKING_SIZE +# define WEAR_LEVELING_BACKING_SIZE 8192 +#endif // WEAR_LEVELING_BACKING_SIZE + +// 32kB logical EEPROM +#ifndef WEAR_LEVELING_LOGICAL_SIZE +# define WEAR_LEVELING_LOGICAL_SIZE 4096 +#endif // WEAR_LEVELING_LOGICAL_SIZE + +// Define how much flash space we have (defaults to lib/pico-sdk/src/boards/include/boards/***) +#ifndef WEAR_LEVELING_RP2040_FLASH_SIZE +# define WEAR_LEVELING_RP2040_FLASH_SIZE (PICO_FLASH_SIZE_BYTES) +#endif + +// Define the location of emulated EEPROM +#ifndef WEAR_LEVELING_RP2040_FLASH_BASE +# define WEAR_LEVELING_RP2040_FLASH_BASE ((WEAR_LEVELING_RP2040_FLASH_SIZE) - (WEAR_LEVELING_BACKING_SIZE)) +#endif |