diff options
Diffstat (limited to 'platforms/chibios/converters')
10 files changed, 265 insertions, 0 deletions
diff --git a/platforms/chibios/converters/promicro_to_bit_c_pro/_pin_defs.h b/platforms/chibios/converters/promicro_to_bit_c_pro/_pin_defs.h new file mode 100644 index 0000000000..92e8fbfa1a --- /dev/null +++ b/platforms/chibios/converters/promicro_to_bit_c_pro/_pin_defs.h @@ -0,0 +1,39 @@ +// Copyright 2022 QMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Left side (front) +#define D3 0U +#define D2 1U +// GND +// GND +#define D1 2U +#define D0 3U +#define D4 4U +#define C6 5U +#define D7 6U +#define E6 7U +#define B4 8U +#define B5 9U + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 29U +#define F5 28U +#define F6 27U +#define F7 26U +#define B1 22U +#define B3 20U +#define B2 23U +#define B6 21U + +// LEDs (Mapped to R and G channel of the Bit-C PRO's RGB led) +#define D5 16U +#define B0 17U + +// Bit-C LED (mapped to B channel of the Bit-C PRO's RGB led) +#define F0 18U diff --git a/platforms/chibios/converters/promicro_to_bit_c_pro/converter.mk b/platforms/chibios/converters/promicro_to_bit_c_pro/converter.mk new file mode 100644 index 0000000000..c0eaee8593 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_bit_c_pro/converter.mk @@ -0,0 +1,12 @@ +# nullbits Bit-C PRO MCU settings for converting AVR projects +MCU := RP2040 +BOARD := QMK_PM2040 +BOOTLOADER := rp2040 + +# These are defaults based on what has been implemented for RP2040 boards +SERIAL_DRIVER ?= vendor +WS2812_DRIVER ?= vendor +BACKLIGHT_DRIVER ?= software + +# Tell QMK to use the correct 2nd stage bootloader +OPT_DEFS += -DRP2040_FLASH_W25X10CL diff --git a/platforms/chibios/converters/promicro_to_blok/_pin_defs.h b/platforms/chibios/converters/promicro_to_blok/_pin_defs.h new file mode 100644 index 0000000000..957b84e1a6 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_blok/_pin_defs.h @@ -0,0 +1,36 @@ +// Copyright 2022 QMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Left side (front) +#define D3 0U +#define D2 1U +// GND +// GND +#define D1 16U +#define D0 17U +#define D4 4U +#define C6 5U +#define D7 6U +#define E6 7U +#define B4 8U +#define B5 9U + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 29U +#define F5 28U +#define F6 27U +#define F7 26U +#define B1 22U +#define B3 20U +#define B2 23U +#define B6 21U + +// LEDs (Mapped to unused pins to avoid collisions) +#define D5 12U +#define B0 13U diff --git a/platforms/chibios/converters/promicro_to_blok/converter.mk b/platforms/chibios/converters/promicro_to_blok/converter.mk new file mode 100644 index 0000000000..5106e411f4 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_blok/converter.mk @@ -0,0 +1,9 @@ +# Boardsource Blok MCU settings for converting AVR projects +MCU := RP2040 +BOARD := QMK_PM2040 +BOOTLOADER := rp2040 + +# These are defaults based on what has been implemented for RP2040 boards +SERIAL_DRIVER ?= vendor +WS2812_DRIVER ?= vendor +BACKLIGHT_DRIVER ?= software diff --git a/platforms/chibios/converters/promicro_to_kb2040/_pin_defs.h b/platforms/chibios/converters/promicro_to_kb2040/_pin_defs.h new file mode 100644 index 0000000000..0a3110890b --- /dev/null +++ b/platforms/chibios/converters/promicro_to_kb2040/_pin_defs.h @@ -0,0 +1,36 @@ +// Copyright 2022 QMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Left side (front) +#define D3 0U +#define D2 1U +// GND +// GND +#define D1 2U +#define D0 3U +#define D4 4U +#define C6 5U +#define D7 6U +#define E6 7U +#define B4 8U +#define B5 9U + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 29U +#define F5 28U +#define F6 27U +#define F7 26U +#define B1 18U +#define B3 20U +#define B2 19U +#define B6 10U + +// LEDs (Mapped to QT connector to avoid collisions with button/neopixel) +#define D5 12U +#define B0 13U diff --git a/platforms/chibios/converters/promicro_to_kb2040/converter.mk b/platforms/chibios/converters/promicro_to_kb2040/converter.mk new file mode 100644 index 0000000000..6ffee357b3 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_kb2040/converter.mk @@ -0,0 +1,9 @@ +# Adafruit KB2040 MCU settings for converting AVR projects +MCU := RP2040 +BOARD := QMK_PM2040 +BOOTLOADER := rp2040 + +# These are defaults based on what has been implemented for RP2040 boards +SERIAL_DRIVER ?= vendor +WS2812_DRIVER ?= vendor +BACKLIGHT_DRIVER ?= software diff --git a/platforms/chibios/converters/promicro_to_promicro_rp2040/_pin_defs.h b/platforms/chibios/converters/promicro_to_promicro_rp2040/_pin_defs.h new file mode 100644 index 0000000000..0a1f4112a3 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_promicro_rp2040/_pin_defs.h @@ -0,0 +1,36 @@ +// Copyright 2022 QMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Left side (front) +#define D3 0U +#define D2 1U +// GND +// GND +#define D1 2U +#define D0 3U +#define D4 4U +#define C6 5U +#define D7 6U +#define E6 7U +#define B4 8U +#define B5 9U + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 29U +#define F5 28U +#define F6 27U +#define F7 26U +#define B1 22U +#define B3 20U +#define B2 23U +#define B6 21U + +// LEDs (Mapped to QT connector to avoid collisions with button/neopixel) +#define D5 17U +#define B0 16U diff --git a/platforms/chibios/converters/promicro_to_promicro_rp2040/converter.mk b/platforms/chibios/converters/promicro_to_promicro_rp2040/converter.mk new file mode 100644 index 0000000000..03863eeb02 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_promicro_rp2040/converter.mk @@ -0,0 +1,9 @@ +# Sparkfun Pro Micro RP2040 MCU settings for converting AVR projects +MCU := RP2040 +BOARD := QMK_PM2040 +BOOTLOADER := rp2040 + +# These are defaults based on what has been implemented for RP2040 boards +SERIAL_DRIVER ?= vendor +WS2812_DRIVER ?= vendor +BACKLIGHT_DRIVER ?= software diff --git a/platforms/chibios/converters/promicro_to_stemcell/_pin_defs.h b/platforms/chibios/converters/promicro_to_stemcell/_pin_defs.h new file mode 100644 index 0000000000..f5dd55905d --- /dev/null +++ b/platforms/chibios/converters/promicro_to_stemcell/_pin_defs.h @@ -0,0 +1,57 @@ +// Copyright 2022 Mega Mind (@megamind4089) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Pindefs for v2.0.0 +// https://megamind4089.github.io/STeMCell/pinout/ + +// Left side (front) +#ifdef STEMCELL_UART_SWAP +# define D3 PAL_LINE(GPIOA, 3) +# define D2 PAL_LINE(GPIOA, 2) +#else +# define D3 PAL_LINE(GPIOA, 2) +# define D2 PAL_LINE(GPIOA, 3) +#endif +// GND +// GND +#ifdef STEMCELL_I2C_SWAP +# define D1 PAL_LINE(GPIOB, 6) +# define D0 PAL_LINE(GPIOB, 7) +#else +# define D1 PAL_LINE(GPIOB, 7) +# define D0 PAL_LINE(GPIOB, 6) +#endif + +#define D4 PAL_LINE(GPIOA, 15) +#define C6 PAL_LINE(GPIOB, 3) +#define D7 PAL_LINE(GPIOB, 4) +#define E6 PAL_LINE(GPIOB, 5) +#define B4 PAL_LINE(GPIOB, 8) +#define B5 PAL_LINE(GPIOB, 9) + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 PAL_LINE(GPIOB, 10) +#define F5 PAL_LINE(GPIOB, 2) +#define F6 PAL_LINE(GPIOB, 1) +#define F7 PAL_LINE(GPIOB, 0) + +#define B1 PAL_LINE(GPIOA, 5) +#define B3 PAL_LINE(GPIOA, 6) +#define B2 PAL_LINE(GPIOA, 7) +#define B6 PAL_LINE(GPIOA, 4) + +// Extra elite-c compatible pinout +#define B7 PAL_LINE(GPIOC, 13) +#define D5 PAL_LINE(GPIOC, 14) +#define C7 PAL_LINE(GPIOC, 15) +#define F1 PAL_LINE(GPIOA, 0) +#define F0 PAL_LINE(GPIOA, 1) + +// TX/RX pins of promicro +#define B0 PAL_LINE(GPIOA, 9) // unconnected pin diff --git a/platforms/chibios/converters/promicro_to_stemcell/converter.mk b/platforms/chibios/converters/promicro_to_stemcell/converter.mk new file mode 100644 index 0000000000..525492f96c --- /dev/null +++ b/platforms/chibios/converters/promicro_to_stemcell/converter.mk @@ -0,0 +1,22 @@ +# Copyright 2022 Mega Mind (@megamind4089) +# SPDX-License-Identifier: GPL-2.0-or-later + +MCU := STM32F411 +BOARD := STEMCELL +BOOTLOADER := tinyuf2 + +SERIAL_DRIVER ?= usart +WS2812_DRIVER ?= bitbang + +EEPROM_DRIVER = wear_leveling +WEAR_LEVELING_DRIVER = legacy + + +ifeq ($(strip $(STMC_US)), yes) + OPT_DEFS += -DSTEMCELL_UART_SWAP +endif + +ifeq ($(strip $(STMC_IS)), yes) + OPT_DEFS += -DSTEMCELL_I2C_SWAP +endif + |