diff options
Diffstat (limited to 'platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs')
4 files changed, 185 insertions, 0 deletions
diff --git a/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/board.h b/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/board.h new file mode 100644 index 0000000000..b4363595d0 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/board.h @@ -0,0 +1,12 @@ +// Copyright 2022 Stefan Kerkmann +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include_next "board.h" + +#undef BOARD_RP_PICO_RP2040 +#define BOARD_GENERIC_PROMICRO_RP2040 + +#undef BOARD_NAME +#define BOARD_NAME "Pro Micro RP2040" diff --git a/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/chconf.h b/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/chconf.h new file mode 100644 index 0000000000..d53f57edd9 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/chconf.h @@ -0,0 +1,13 @@ +// Copyright 2022 Stefan Kerkmann +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#define CH_CFG_SMP_MODE TRUE +#define CH_CFG_ST_RESOLUTION 32 +#define CH_CFG_ST_FREQUENCY 1000000 +#define CH_CFG_INTERVALS_SIZE 32 +#define CH_CFG_TIME_TYPES_SIZE 32 +#define CH_CFG_ST_TIMEDELTA 20 + +#include_next <chconf.h> diff --git a/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/config.h b/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/config.h new file mode 100644 index 0000000000..7fe9b654e1 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/config.h @@ -0,0 +1,62 @@ +// Copyright 2022 Stefan Kerkmann +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +/**====================== + ** I2C Driver + *========================**/ + +#if !defined(I2C_DRIVER) +# define I2C_DRIVER I2CD2 +#endif + +#if !defined(I2C1_SDA_PIN) +# define I2C1_SDA_PIN GP2 +#endif + +#if !defined(I2C1_SCL_PIN) +# define I2C1_SCL_PIN GP3 +#endif + +/**====================== + ** SPI Driver + *========================**/ + +#if !defined(SPI_DRIVER) +# define SPI_DRIVER SPID0 +#endif + +#if !defined(SPI_SCK_PIN) +# define SPI_SCK_PIN GP18 +#endif + +#if !defined(SPI_MISO_PIN) +# define SPI_MISO_PIN GP20 +#endif + +#if !defined(SPI_MOSI_PIN) +# define SPI_MOSI_PIN GP19 +#endif + +/**====================== + ** SERIAL Driver + *========================**/ + +#if !defined(SERIAL_USART_DRIVER) +# define SERIAL_USART_DRIVER SIOD0 +#endif + +#if !defined(SERIAL_USART_TX_PIN) && !defined(SOFT_SERIAL_PIN) +# define SERIAL_USART_TX_PIN GP0 +#endif + +#if !defined(SERIAL_USART_RX_PIN) +# define SERIAL_USART_RX_PIN GP1 +#endif + +/**====================== + ** Double-tap + *========================**/ + +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET diff --git a/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/mcuconf.h new file mode 100644 index 0000000000..8348e5312f --- /dev/null +++ b/platforms/chibios/boards/GENERIC_PROMICRO_RP2040/configs/mcuconf.h @@ -0,0 +1,98 @@ +/* + ChibiOS - Copyright (C) 2006..2021 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * RP2040_MCUCONF drivers configuration. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...1 Lowest...Highest. + */ + +#define RP2040_MCUCONF + +/* + * HAL driver system settings. + */ +#define RP_NO_INIT FALSE +#define RP_CORE1_START FALSE +#define RP_CORE1_VECTORS_TABLE _vectors +#define RP_CORE1_ENTRY_POINT _crt0_c1_entry +#define RP_CORE1_STACK_END __c1_main_stack_end__ + +/* + * IRQ system settings. + */ +#define RP_IRQ_SYSTICK_PRIORITY 2 +#define RP_IRQ_TIMER_ALARM0_PRIORITY 2 +#define RP_IRQ_TIMER_ALARM1_PRIORITY 2 +#define RP_IRQ_TIMER_ALARM2_PRIORITY 2 +#define RP_IRQ_TIMER_ALARM3_PRIORITY 2 +#define RP_IRQ_UART0_PRIORITY 3 +#define RP_IRQ_UART1_PRIORITY 3 +#define RP_IRQ_SPI0_PRIORITY 2 +#define RP_IRQ_SPI1_PRIORITY 2 +#define RP_IRQ_USB0_PRIORITY 3 +#define RP_IRQ_I2C0_PRIORITY 2 +#define RP_IRQ_I2C1_PRIORITY 2 + +/* + * ADC driver system settings. + */ +#define RP_ADC_USE_ADC1 FALSE + +/* + * SIO driver system settings. + */ +#define RP_SIO_USE_UART0 TRUE +#define RP_SIO_USE_UART1 FALSE + +/* + * SPI driver system settings. + */ +#define RP_SPI_USE_SPI0 TRUE +#define RP_SPI_USE_SPI1 FALSE +#define RP_SPI_SPI0_RX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY +#define RP_SPI_SPI0_TX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY +#define RP_SPI_SPI1_RX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY +#define RP_SPI_SPI1_TX_DMA_CHANNEL RP_DMA_CHANNEL_ID_ANY +#define RP_SPI_SPI0_DMA_PRIORITY 1 +#define RP_SPI_SPI1_DMA_PRIORITY 1 +#define RP_SPI_DMA_ERROR_HOOK(spip) + +/* + * I2C driver system settings. + */ +#define RP_I2C_USE_I2C0 FALSE +#define RP_I2C_USE_I2C1 TRUE +#define RP_I2C_BUSY_TIMEOUT 50 +#define RP_I2C_ADDRESS_MODE_10BIT FALSE + +/* + * USB driver system settings. + */ +#define RP_USB_USE_USBD0 TRUE +#define RP_USB_FORCE_VBUS_DETECT TRUE +#define RP_USE_EXTERNAL_VBUS_DETECT FALSE +#define RP_USB_USE_SOF_INTR TRUE +#define RP_USB_USE_ERROR_DATA_SEQ_INTR FALSE + +#endif /* MCUCONF_H */ |